SRU5016-330Y

PL IA NT CO M *R oH S Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 1.6 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs ■ Current up to 1.8 A ■ RoHS compliant* 350 SRU5016 Series - Shielded SMD Power Inductors Inductance @ 100 KHz Tol. L (μH) (%) Bourns Part Number Q Ref. Test Freq. (MHz) SRF Min. (MHz) RDC .(mΩ) I rms Max. (A) I sat Typ. (A) **KFactor SRU5016-1R8Y 1.8 ±30 9 7.96 100 24 1.75 1.70 605 SRU5016-3R3Y 3.3 ±30 9 7.96 80 35 1.55 1.50 462 SRU5016-4R7Y 4.7 ±30 9 7.96 60 43 1.30 1.20 374 SRU5016-6R8Y 6.8 ±30 8 7.96 50 50 1.20 1.10 314 SRU5016-100Y 10.0 ±30 15 2.52 40 84 1.00 0.90 271 SRU5016-150Y 15.0 ±30 15 2.52 32 130 0.80 0.72 225 SRU5016-220Y 22.0 ±30 15 2.52 28 195 0.65 0.56 192 SRU5016-330Y 33.0 ±30 13 2.52 22 300 0.54 0.50 148 SRU5016-470Y 47.0 ±30 18 2.52 18 390 0.46 0.42 125 SRU5016-680Y 68.0 ±30 18 2.52 15 560 0.36 0.33 108 SRU5016-101Y 100.0 ±30 18 0.796 12 850 0.30 0.27 83 Δ I (peak-to-peak ripple current, A), determine core loss from Core Loss vs. Flux Density plot. Test Voltage ....................................0.1 V .. 230 °C, 50 sec. max. Operating Temp. .........-40 °C to +125 °C (Temperature rise included) Storage Temperature ..-40 °C to +125 °C Resistance to Soldering Heat ............................. +260 °C for 10 sec. Moisture Sensitivity Level ..................... 1 ................. N/A Materials Core ....................Ferrite DR and RI core Wire ............................Enameled copper Terminal ....................................Ag/Ni/Sn Rated Current..Ind. drop 35 % typ. at Isat Temperature Rise .....................40 °C max. at rated Irms Packaging .................. 1000 pcs. per reel Product Dimensions 5.2 ± 0.2 (.205 ± .008) Core Loss vs. Flux Density 1000 5.2 ± 0.2 (.205 ± .008) Core Loss (mW) 100 1.6 ± 0.2 (.063 ± .008) 10 1 MHz 500 KHz 300 KHz 200 KHz 100 KHz 50 KHz 1 1.7 (.067) TYP. 3.9 TYP. (.154) 0.1 1.8 TYP. (.071) 0.01 100 1000 10000 1.7 TYP. (.067) Flux Density Bp-p (gauss) Recommended Layout Electrical Schematic Inductor Connection 1.1 (.043) REF. 1.1 (.043) REF. * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf LCR METER DIMENSIONS: 3.7 (.146) REF. 3.7 (.146) REF. MM (INCHES) WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov 1.1 (.043) REF. 2.0 (.079) REF. 1.1 (.043) REF. REF. 2.0 (.079) SRU5016 Series SMD Power Inductors SRF0504 Series- -Shielded Line Filter 178 DIA. (7.008) 2.0 ± 0.5 (.079 ± .020) 16.5 (.650) 13.0 ± 0.5 (.512 ± .020) DIA. 21.0 ± 0.8 (.827 ± .031) COVER TAPE EMBOSSED CAVITY 50.0 (1.969) 13.0 ± 0.5 DIA. (.512 ± .020) EMBOSSED CARRIER 14 (.551) 12.0 (.472) 4 (.157) END START 8 (.315) NO COMPONENT 160 (6.299) NO COMPONENT COMPONENTS 400 (15.748) USER DIRECTION OF FEED QTY: 1000 PCS. PER REEL DIMENSIONS: MM (INCHES) REV. 03/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL