SRU6025-330Y

T PL IA N M CO *R oH S Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 2.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs ■ Current up to 3.5 A ■ RoHS compliant* 100 SRU6025 Series - Shielded SMD Power Inductors Bourns Part Number Inductance @ 100 KHz L Tol. (μH) (%) Q Ref. Test Freq. (MHz) SRF Typ. (MHz) RDC Max. (mΩ) I rms Max. (A) I sat Typ. (A) **KFactor SRU6025-1R2Y 1.2 ±30 8 7.96 120 19 4.00 3.20 535 SRU6025-2R2Y 2.2 ±30 8 7.96 65 24 3.40 2.35 370 SRU6025-3R3Y 3.3 ±30 8 7.96 50 27 3.20 2.00 321 SRU6025-4R7Y 4.7 ±30 8 7.96 42 35 2.70 1.55 253 SRU6025-6R8Y 6.8 ±30 8 7.96 36 42 2.40 1.30 229 SRU6025-8R2Y 8.2 ±30 8 7.96 30 52 2.20 1.25 193 SRU6025-100Y 10 ±30 8 7.96 25 57 2.00 1.05 178 SRU6025-150Y 15 ±30 12 2.52 22 86 1.80 0.92 146 123 SRU6025-220Y 22 ±30 12 2.52 18 130 1.60 0.70 SRU6025-330Y 33 ±30 12 2.52 12 180 1.20 0.64 98 SRU6025-470Y 47 ±30 12 2.52 10 250 1.00 0.48 84 SRU6025-680Y 68 ±30 10 2.52 8 365 0.80 0.40 68 SRU6025-101Y 100 ±30 24 2.52 7 500 0.70 0.35 55 SRU6025-151Y 150 ±30 30 2.52 5 770 0.54 0.28 47 SRU6025-221Y 220 ±30 20 2.52 4 1250 0.42 0.24 39 Test Voltage ....................................0.1 V .. 230 °C, 50 sec. max. Operating Temp. .........-40 °C to +125 °C (Temperature rise included) Storage Temp. ............-40 °C to +125 °C Resistance to Soldering Heat ............................... 260 °C for 10 sec. Moisture Sensitivity Level ..................... 1 ................. N/A Materials Core ....................Ferrite DR and RI core Wire ............................Enameled copper Terminal ....................................Ag/Ni/Sn Rated Current..Ind. drop 35 % typ. at Isat Temp. Rise.......30 °C max. at rated Irms Packaging .................... 600 pcs. per reel Product Dimensions Δ I (peak-to-peak ripple current, A), determine core loss from Core Loss vs. Flux Density plot on page 2. 100 Electrical Schematic Recommended Layout 6.20 ± 0.30 (.244 ± .012) REF. 1.10 (.043) 1.10 (.043) REF. 4.90 REF. (.193) 1.10 (.043) REF. 6.50 ± 0.30 (.256 ± .012) 2.50 ± 0.30 (.098 ± .012) 4.90 (.193) REF. 2.40 (.094) REF. 1.10 (.043) REF. 4.90 TYP. (.193) 2.15 (.085) TYP. 2.40 REF. (.094) 2.20 (.087) TYP. 2.15 TYP. (.085) DIMENSIONS: WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov MM (INCHES) *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SRU6025 Series SMD Power Inductors SRF0504 Series- -Shielded Line Filter Core Loss vs. Flux Density 1000 Core Loss (mW) 100 10 1 MHz 500 KHz 300 KHz 200 KHz 100 KHz 50 KHz 1 0.1 0.01 100 1000 10000 Flux Density Bp-p (gauss) 178.0 DIA. (7.008) 2.0 ± 0.5 (.079 ± .020) 16.5 (.650) COVER TAPE 13.0 ± 0.5 (.512 ± .020) DIA. 21.0 ± 0.8 (.827 ± .031) EMBOSSED CAVITY 50.0 (1.969) 13.0 ± 0.5 DIA. (.512 ± .020) EMBOSSED CARRIER 12.0 (.472) 14.0 (.551) 4 (.157) END 100 START 100 100 10 8 (.315) NO COMPONENT NO COMPONENT 200 (7.874) DIMENSIONS: COMPONENTS MM (INCHES) 400 (15.748) USER DIRECTION OF FEED QTY: 600 PCS. PER REEL REV. 03/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL