TISP4011H1BJR-S

TISP4011H1BJ VERY LOW VOLTAGE BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS TISP4011H1BJ VLV Overvoltage Protector Series General Information SMB Package (Top View) Additional Information Click these links for more information: The protector consists of a symmetrical voltage-triggered bidirectional thyristor. Overvoltages are initially clipped by breakdown clamping until the voltage rises to the breakover level, which causes the device to crowbar into a low-voltage on-state condition. This low-voltage onstate causes the current resulting from the overvoltage to be safely diverted through the device. The device switches off when the diverted current falls below the holding current value. 2 T(A) R(B) 1 PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT MDXXBGE Agency Recognition Device Symbol T Description UL File Number: E215609 SD4XAA R T erminals T and R correspond to the alternative line designators of A and B Absolute Maximum Ratings, TA = 25 °C (Unless Otherwise Noted) Rating Symbol Value Unit Repetitive peak off-state voltage VDRM ±5.25 V Non-repetitive peak on-state pulse current 10/1000 μs 2/10 μs IPPSM ±100 ±500 A Junction temperature TJ -40 to +150 °C Storage temperature Tstg -55 to +150 °C Electrical Characteristics, TA = 25 °C (Unless Otherwise Noted) Parameter ID Test Conditions Min. Typ. Max. Unit Leakage current VD = VDRM 1 200 μA V(BO) Breakover voltage di/dt = ±1 mA/μs 9 10.5 V I(BO) Breakover current di/dt = ±1 mA/μs 75 200 mA VT On-state voltage IT = ±5 A 3 V IH Holding current IT = ±5 A, di/dt = ±1 mA/μs Off-state capacitance Vd = 0 V, f = 1 MHz, 1 Vrms Coff 20 60 mA 110 pF OCTOBER 2016 – REVISED JULY 2019 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. TISP4011H1BJ VLV Overvoltage Protector Series Parameter Measurement Information Figure 1. Voltage-Current Characteristic for T and R Terminals All Measurements are Referenced to the R Terminal How to Order Device Package Carrier Order as TISP4011H1BJ BJ (SMB/DO-214AA J-Bend) R (Embossed Tape Reeled) TISP4011H1BJR-S Carrier Information For production quantities, the carrier will be embossed tape reel pack. Evaluation quantities may be shipped in bulk pack or embossed tape. Package Carrier Standard Quantity SMB Embossed Tape Reel Pack 3000 Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com OCTOBER 2016 – REVISED JULY 2019 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL