BL-B5141-TBS18C

BRIGHT LED ELECTRONICS CORP. SINCE 1981 BL-B5141-TBS18C ● Features: 1. Chip material: GaP/GaP 2. Emitted color : Bright Red 3. Lens Appearance : Red Diffused 4. Low power consumption. 5. High efficiency. 6. Versatile mounting on P.C. Board or panel. 7. Low current requirement. 8. 3mm diameter package 9. This product don’t contained restriction substance, compliance ROHS standard. ● Package dimensions: 3.00(.118) 0.81(.032) 5.30(.209) 1.5(.059) MAX. 25.4(1.00) MIN. CATHODE 0.5(.02) SQ.TYP. 3.80(.150) 1.00(.039) MIN. Flat Denotes Cathode ● Applications: 1. TV set 2. Monitor 3. Telephone 4. Computer 5. Circuit board Notes: 2.54(.100) NOM. 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm (0.01”) unless otherwise specified. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. ● Absolute Maximum Ratings(Ta=25℃) Parameter Power Dissipation Forward Current Peak Forward Current*1 Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature 1 Symbol Pd IF IFP VR Topr Tstg Tsol Rating 40 15 50 5 -40℃~80℃ -40℃~85℃ 260℃(for 5 seconds) Unit mW mA mA V * Condition for IFP is pulse of 1/10 duty and 0.1msec width. Ver.1.0 Page: 1 of 3 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BL-B5141-TBS18C ● Electrical and optical characteristics(Ta=25℃) Parameter Forward Voltage Luminous Intensity Reverse Current Peak Wave Length Dominant Wave Length Spectral Line Half-width Viewing Angle Symbol VF Iv IR λp λd ∆λ 2θ1/2 Condition IF=20mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA IF=20mA Min. - Typ. 2.3 4.0 700 650 100 35 Max. 2.6 100 - Unit V mcd µA nm nm nm deg ● Typical Electro-Optical Characteristics Curves Fig.1 Relative intensity vs. Wavelength 1.0 60 Fig.2 Forward current derating curve vs. Ambient temperature 50 Relative radiant intensity Forward current(mA) 40 0.5 30 20 10 0 600 700 800 0 20 40 60 80 100 Wavelength λ (nm) Ambient temperature Ta(℃) Fig.3 Forward current vs. Forward voltage 50 3.0 Fig.4 Relative luminous intensity vs. Ambient temperature 40 Relative luminous intensity 2.5 Forward current(mA) 2.0 30 1.5 20 1.0 10 0.5 0 1 2 3 4 5 0 -40 -20 0 20 40 60 Forward voltage(V) Ambient temperature Ta(℃) Fig.5 Relative luminous intensity vs. Forward current 2.0 Fig.6 Radiation diagram 0 10 20 30 Relative luminous intensity(@20mA) 1.5 Relative radiant intensity 1.0 40 1.0 0.9 0.8 50 60 70 0.5 0.7 80 90 0 10 20 30 40 50 0.5 0.3 0.1 0.2 0.4 0.6 Forward current (mA) Ver.1.0 Page: 2 of 3 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BL-B5141-TBS18C ● Tapping and packaging specifications(Units: mm) 3.0(.118) 3.8(.150) H1--------------------18.0(.709)±0.5 5.3(.209) L------------------------11.0(.433) Max. Wo--------------------------------9.0(.35) Cathode P1------------------------------5.0(.196) H1 W2 F--------------------------------2.54(0.1) P-------------------------------12.5(.49) L Wo W1 W3 D----------------------------- 4.0(.157) W1---------------------------10.0(.394) P1 F P D T W2----------------------4.0(.157) Max. W3---------------------------18.0(.708) T-----------------------1.42(.055) Max. TxSxxx (2.54 PITCH STRAIGHT LEADS) USER DIRECTION OF FEED Notes: 1.All dimensions are in millimeter (inch). 2.Tolerance is ±0.25mm (0.01”) unless otherwise specified. 3.Lead spacing is measured where the leads emerge from the package. 4.The stopper is used as the tie bar. ● Bin Limits 1. Intensity Bin Limits (At IF= 20mA) B in Code : E F G H J : ● Bin： x Min. (mcd) : 1.4 2.1 3.2 4.8 7.0 : Max. (mcd) : 2.8 4.2 6.3 9.4 14.0 : Intensity bin code Ver.1.0 Page: 3 of 3