BPT-NP13C2

BRIGHT LED ELECTRONICS CORP. SINCE 1981 BPT-NP13C2 SIDE- LOOK PACKAGE PHOTOTRANSISTOR ● Features 1. 2. 3. Wide range of collector current. Lend for high sensitivity. Low cost plastic package. 2.5(.098) 1.7(.067) ● Package Dimensions: 3.8(.150) 4.0(.157) 4.6(.181) 1.6(.063) 4.5(.177) 2.9(.114) 1.8(.071) 0.65(.026) 1.5(.059) 4. Lens Appearance: Water Clear. 5. This product doesn't contain restriction substance, comply ROHS standard 14.0(.551) MIN. ● Description The BPT-NP13C2 is a NPN silicon phototransistor mounted in a lensed ,water clear plastic package . The lensing effect of the package allows an acceptance half view angle of 50∘that is measured from the optical axis to the half power point . 1. Emitter 2. Collector 0(.039) MIN. 1 2 0.5(.020) 0.5(.019) 2.54(.100) NOTES: 1.All dimensions are in millimeters (inches). 2.Tolerance is ±0.25mm (0.01’’) unless otherwise specified. 3.Lead spacing is measured where the leads emerge from the package 4.Specifications are subject to change without notice ● Absolute Maximum Ratings(Ta=25℃) Parameter Power Dissipation Collector- Emitter Voltage Emitter- Collector Voltage Operating Temperature Storage Temperature Range Lead Soldering Temperature Maximum Rating 100 30 5 -45℃~+85℃ -45℃~+100℃ 260℃ for 5 seconds Unit mW V V Rev:1. 0 Page1 of 3 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BPT-NP13C2 ● Electrical Characteristics (TA=25℃ unless otherwise noted) PARAMETER Collector- Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector- Emitter Saturation Voltage Rise Time Fall Time Collector Dark Current Light Current SYMBOL V(BR)CEO V(BR)ECO VCE(SAT) Tr Tf Id IC (ON) MIN 30 5 TYP 25 25 11 MAX 0.5 100 UNITS V V V μS nA mA TEST CONDITIONS IC=1 mA Ee=0mW/cm2 IR=0.1mA Ee=0 mW/cm2 IC=0.1 mA Ee=1.0mW/cm2 VCE =5V RL=1KΩ F=100HZ VCE=10V Ee=0 mW/cm2 VCE=5V Ee=1.0mW/cm2 ● Typical Optical-Electrical Characteristic Curves (uA) 10000 1000 FIG.1 Dark Current Vs. Ambient Temperature (mW) 120 100 Power Dissipation Pd 80 60 40 20 0 FIG.2 Power Dissipation Vs. Ambient Temperature 100 Dark Current 10 1 0.1 0.01 0 20 60 80 100 40 Ambient Temperature 120 (°C) -25 0 25 50 75 100 Ambient Temperature 125 (°C) FIG.3 Rise And Fall Time Vs. Load Resistance (us) 20 Vcc=5V FIG.4 Relative Collector Current Vs. Irradiance 2.5 Relative Collector Current Vce=5V 16 Rise and Fall Time 12 8 4 0 F=100Hz Tf Tr 2.0 1.5 1.0 0.5 0 0 0.5 1.0 1.5 2.0 2.5 2 3.0 (mW/cm ) 0 0.2 0.4 0.6 0.8 1.0 (K ) Irradiance Load Resistance Rev:1.0 Page2 of 3 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BPT-NP13C2 ● Tapping and packaging specifications(Units: mm) ● Packaging Bag Dimensions Notes: 1、1000pcs per bag, 8Kpcs per box. 2、All dimensions are in millimeters(inches). 3、Specifications are subject to change without notice. Rev:1.0 Page3 of 3