BS-AB13RD

BRIGHT LED ELECTRONICS CORP. SINCE 1981 BS-AB13RD ● 1. 2. 3. 4. 5. 6. 7. Features : 1.20 inch (30.04mm) Digit Height. Continuous uniform segments. Low power requirement. Excellent characters appearance. Solid state reliability. ● Package Dimensions : 17.30(.681) 30.40(1.20) 40.70(1.602) 35.50(1.398) + Categorized for luminous intensity. Direct drive common anode. PIN 1. 28.80(1.134) 9.00(.354) ● 1. 2. 3. 4. Description : The BS-AB13RD is a 30.40mm(1.20") 2.54(.100) 3.00(.118) MIN. high single digit seven segments display. Notes: 1. All dimensions are in millimeters(inches). This product use yellow chips, which 2. Tolerance is ±0.25mm(.01")unless otherwise are made from GaAsP on GaP substrate. specified. 3. Specifications are subject to change without This product have a black face and notice. white segments. This product doesn't contain restriction substance, comply ROHS standard. ● Internal Circuit Diagram : 1,8 A F E 佰鴻工業股份有限公司 http://www.brtled.com G B C D DP A 7 B 6 C 4 DE 32 F G DP 9 10 5 Ver.1.0 Page 1 of 3 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BS-AB13RD ● Absolute Maximum Ratings(Ta=25℃) Parameter Power Dissipation Per Segment Forward Current Per Segment Peak Forward Current Per Segment Reverse Voltage Per Segment Operating Temperature Storage Temperature Soldering Temperature (1/16" From Body) Symbol Pd IF IFP (Duty 1/10, 1KHZ) VR Topr Tstg Tsol Rating 160 30 150 5 -40℃~80℃ -40℃~85℃ 260℃ For 5 Seconds Unit mW mA mA V - ● Electrical And Optical Characteristics(Ta=25℃) Parameter Forward Voltage Per Segment Luminous Intensity Per Segment Reverse Current Per Segment Peak Wave Length Dominant Wave Length Symbol Condition Vf Iv IR λp λd IF=10mA IF=10mA VR=5V IF=10mA IF=10mA Min. 586 - Typ. 4.0 4.0 589 - Max. 5.0 100 594 - Unit V mcd µA nm nm nm Spectral Line Half-width 佰鴻工業股份有限公司 http://www.brtled.com ∆λ IF=10mA 35 Ver.1.0 Page 2 of 3 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BS-AB13RD ● Typical Electro-Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Fig.1 Relative Radiant Intensity VS. Wavelength 1.0 Relative Radiant Intensity 0.5 0 500 530 560 Wavelength(nm) 590 620 650 680 Relative Luminous Intensity (@20mA) 50 Fig.2 Forward Current VS. Forward Voltage 3.0 2.5 2.0 1.5 1.0 0.5 Fig.3 Relative Luminous Intensity VS. Ambient Temperature Forward Current (mA) 40 30 20 10 0 Forward Voltage (V) Fig.4 Relative Luminous Intensity VS. Forward Current 1 2 3 4 5 0 -40 Ambient Temperature Ta( C) Fig.5 Forward Current Derating Curve VS. Ambient Temperature -20 0 20 40 60 Relative Luminous Intensity (@20mA) 3.0 50 40 30 2.0 Forward Current(mA) 1.0 佰鴻工業股份有限公司 http://www.brtled.com 20 10 0 0 10 20 30 40 50 20 40 60 80 100 120 Forward Current(mA) Ambient Temperature Ta( C) Ver.1.0 Page 3 of 3