BS-AB2EGRD

BRIGHT LED ELECTRONICS CORP. SINCE 1981 BS-AB2EGRD ● 1. 2. 3. 4. 5. 6. 7. Features : 1.20 inch (30.4mm) Digit Height. Continuous uniform segments. Low power requirement. Excellent characters appearance. Solid state reliability. Categorized for luminous intensity. Direct drive common anode. ● Package Dimensions : 17.30(.681) 30.40(1.20) 40.70(1.602) 35.50(1.398) + PIN 1. 28.80(1.134) 9.00(.354) ● 1. 2. 5.8±0.5(.228±020) Description : 2.54(.100) The BS-AB2EGRD is a 30.4mm (1.20”) high single digit seven segment display. This product use hi-eff red chips and green chips ,the hi-eff red chips are made from GaAsP on GaP substrate, the green chips are made from GaP on GaP substrate., Notes: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(.01")unless otherwise specified. 3. Specifications are subject to change without notice. 3. 4. This product have a black face and white segments. This product doesn't contain restriction substance, comply ROHS standard. ● Internal Circuit Diagram : 佰鴻工業股份有限公司 http://www.brtled.com 1 5 A F G B RED GREEN E C D DP A 7 B 6 C 4 D 3 E 2 F 9 G 10 DP 8 Ver.1.0 Page 1 of 3 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BS-AB2EGRD ● Absolute Maximum Ratings(Ta=25℃) Parameter Power Dissipation Per Segment Forward Current Per Segment Peak Forward Current Per Segment Reverse Voltage Per Segment Operating Temperature Storage Temperature Soldering Temperature (1/16" From Body) Symbol Pd IF IFP (Duty 1/10, 1KHZ) VR Topr Tstg Tsol Hi-Eff Red Rating 160 30 150 5 Green Rating 160 30 150 Unit mW mA mA V - -40℃~80℃ -40℃~85℃ 260℃ For 5 Seconds ● Electrical And Optical Characteristics(Ta=25℃) Hi-Eff Red Parameter Forward Voltage Per Segment Luminous Intensity Per Segment Reverse Current Per Segment Peak Wave Length Dominant Wave Length Spectral Line Half-width Symbol Condition Vf Iv IR λp λd ∆λ IF=10mA IF=10mA VR=5V IF=10mA IF=10mA IF=10mA Min. 626 - Typ. 4.0 5.5 640 Max. 5.0 100 636 Unit V mcd µA nm nm nm 40 - Green Parameter Forward Voltage Per Segment Symbol Condition Vf Iv IR IF=10mA Min. Typ. 4.4 Max. 5.0 - Unit V mcd µA nm nm nm Luminous Intensity Per Segment Reverse Current Per Segment Peak Wave Length 佰鴻工業股份有限公司 http://www.brtled.com IF=10mA VR=5V 5.5 λp IF=10mA 568 30 λd ∆λ IF=10mA IF=10mA 567 - 100 Dominant Wave Length Spectral Line Half-width 572 Ver.1.0 Page 2 of 3 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BS-AB2EGRD ● Typical Electro-Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Fig.1 Relative Radiant Intensity VS. Wavelength (E) (G) 1.0 Relative Radiant Intensity 0.5 0 530 560 590 620 650 680 710 Wavelength(nm) Fig.3 Relative Luminous Intensity VS. Ambient Temperature (E) (G) Relative Luminous Intensity (@20mA) 3 4 5 50 40 30 20 10 0 Fig.2 Forward Current VS. Forward Voltage 3.0 2.5 2.0 1.5 1.0 0.5 Forward Current (mA) 1 2 Forward Voltage (V) Fig.4 Relative Luminous Intensity VS. Forward Current (G) (E) 0 -40 Ambient Temperature Ta( C) Fig.5 Forward Current Derating Curve VS. Ambient Temperature -20 0 20 40 60 Relative Luminous Intensity (@20mA) 2.0 50 40 30 佰鴻工業股份有限公司 http://www.brtled.com 1.0 20 0.5 0 10 0 10 20 30 40 50 Forward Current(mA) 1.5 Forward Current(mA) Ambient Temperature Ta( C) 20 40 60 80 100 120 Ver.1.0 Page 3 of 3