0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
BS616LV4010BI

BS616LV4010BI

  • 厂商:

    BSI(连邦科技)

  • 封装:

  • 描述:

    BS616LV4010BI - Very Low Power/Voltage CMOS SRAM 256K X 16 bit - Brilliance Semiconductor

  • 数据手册
  • 价格&库存
BS616LV4010BI 数据手册
BSI FEATURES Very Low Power/Voltage CMOS SRAM 256K X 16 bit DESCRIPTION BS616LV4010 • Very low operation voltage : 2.7 ~ 3.6V • Very low power consumption : Vcc = 3.0V C-grade: 20mA (Max.) operating current I -grade: 25mA (Max.) operating current 0.5uA (Typ.) CMOS standby current • High speed access time : -70 70ns (Max.) at Vcc = 3.0V -10 100ns (Max.) at Vcc = 3.0V •Automatic power down when chip is deselected • Three state outputs and TTL compatible • Fully static operation • Data retention supply voltage as low as 1.5V • Easy expansion with CE and OE options • I/O Configuration x8/x16 selectable by LB and UB pin The BS616LV4010 is a high performance, very low power CMOS Static Random Access Memory organized as 262,144 words by 16 bits and operates from a wide range of 2.7V to 3.6V supply voltage. Advanced CMOS technology and circuit techniques provide both high speed and low power features with a typical CMOS standby current of 0.5uA and maximum access time of 70/100ns in 3V operation. Easy memory expansion is provided by an active LOW chip enable(CE) and active LOW output enable(OE) and three-state output drivers. The BS616LV4010 has an automatic power down feature, reducing the power consumption significantly when chip is deselected. The BS616LV4010 is available in DICE form, JEDEC standard 44-pin TSOP Type II package and 48-pin BGA package. PRODUCT FAMILY PRODUCT FAMILY BS616LV4010DC BS616LV4010EC BS616LV4010AC BS616LV4010BC BS616LV4010DI BS616LV4010EI BS616LV4010AI BS616LV4010BI OPERATING TEMPERATURE Vcc RANGE SPEED ( ns ) Vcc=3.0V ( ICCSB1, Max ) POWER DISSIPATION STANDBY Operating ( ICC, Max ) PKG TYPE DICE TSOP2-44 BGA-48-0608 BGA-48-0810 DICE TSOP2-44 BGA-48-0608 BGA-48-0810 Vcc=3.0V Vcc=3.0V +0 O C to +70 O C 2.7V ~ 3.6V 70 / 100 8uA 20mA -40 O C to +85 O C 2.7V ~ 3.6V 70 / 100 12uA 25mA PIN CONFIGURATIONS A4 A3 A2 A1 A0 CE DQ0 DQ1 DQ2 DQ3 VCC GND DQ4 DQ5 DQ6 DQ7 WE A17 A16 A15 A14 A13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 A5 A6 A7 OE UB LB DQ15 DQ14 DQ13 DQ12 GND VCC DQ11 DQ10 DQ9 DQ8 NC A8 A9 A10 A11 A12 BLOCK DIAGRAM BS616LV4010EC BS616LV4010EI A4 A3 A2 A1 A0 A17 A16 A15 A14 A13 A12 Address Input Buffer 22 Row Decoder 2048 Memory Array 2048 x 2048 2048 DQ0 16 Data Input Buffer 16 Column I/O . . . . DQ15 . . . . Write Driver Sense Amp 128 Column Decoder 16 Data Output 16 Buffer CE WE OE UB LB Vcc Gnd Control 14 Address Input Buffer A11 A10 A9 A8 A7 A6 A5 Brilliance Semiconductor Inc. reserves the right to modify document contents without notice. R0201-BS616LV4010 1 Revision 2.3 April. 2002 BSI PIN DESCRIPTIONS BS616LV4010 Name A0-A17 Address Input CE Chip Enable Input Function These 18 address inputs select one of the 262,144 x 16-bit words in the RAM. CE is active LOW. Chip enables must be active to read from or write to the device. if chip enable is not active, the device is deselected and is in a standby power mode. The DQ pins will be in the high impedance state when the device is deselected. WE Write Enable Input The write enable input is active LOW and controls read and write operations. With the chip selected, when WE is HIGH and OE is LOW, output data will be present on the DQ pins; when WE is LOW, the data present on the DQ pins will be written into the selected memory location. OE Output Enable Input The output enable input is active LOW. If the output enable is active while the chip is selected and the write enable is inactive, data will be present on the DQ pins and they will be enabled. The DQ pins will be in the high impedance state when OE is inactive. LB and UB Data Byte Control Input DQ0 - DQ15 Data Input/Output Ports Vcc Gnd Lower byte and upper byte data input/output control pins. These 16 bi-directional ports are used to read data from or write data into the RAM. Power Supply Ground TRUTH TABLE MODE Not selected (Power Down) Output Disabled Read CE H L L WE X H H OE X H L LB X X L H L L Write L L X H L UB X X L L H L L H DQ0~DQ7 High Z High Z Dout High Z Dout Din X Din DQ8~DQ15 High Z High Z Dout Dout High Z Din Din X Vcc CURRENT ICCSB, ICCSB1 ICC ICC ICC ICC ICC ICC ICC R0201-BS616LV4010 2 Revision 2.3 April. 2002 BSI ABSOLUTE MAXIMUM RATINGS(1) SYMBOL VTERM TBIAS TSTG PT IOUT PARAMETER Terminal Voltage Respect to GND with BS616LV4010 OPERATING RANGE UNITS V O RATING -0.5 to Vcc+0.5 -40 to +125 -60 to +150 1.0 20 RANGE Commercial Industrial AMBIENT TEMPERATURE 0 O C to +70 O C -40 C to +85 C O O Vcc 2.7V ~ 3.6V 2.7V ~ 3.6V Temperature Under Bias Storage Temperature Power Dissipation DC Output Current C C O W mA CAPACITANCE (1) (TA = 25oC, f = 1.0 MHz) SYMBOL 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. CIN CDQ PARAMETER Input Capacitance Input/Output Capacitance CONDITIONS MAX. UNIT VIN=0V VI/O=0V 6 8 pF pF 1. This parameter is guaranteed and not tested. DC ELECTRICAL CHARACTERISTICS ( TA = 0 to + 70oC ) PARAMETER NAME VIL VIH IIL IOL VOL VOH ICC PARAMETER Guaranteed Input Low Voltage (2) Guaranteed Input High Voltage (2) Input Leakage Current Output Leakage Current Output Low Voltage Output High Voltage Operating Power Supply Current Standby Current-TTL Vcc = Max, VIN = 0V to Vcc Vcc = Max, CE = VIH, or OE = VIH, VI/O = 0V to Vcc Vcc = Max, IOL = 2mA Vcc = Min, IOH = -1mA CE = VIL, IDQ = 0mA, F = Fmax(3) Vcc=3.0V Vcc=3.0V Vcc=3.0V TEST CONDITIONS Vcc=3.0V Vcc=3.0V Vcc=3.0V MIN. TYP. -0.5 2.0 ---2.4 --------- (1 ) MAX. 0.8 Vcc+0.2 1 1 0.4 -20 UNITS V V uA uA V V mA ICCSB CE = V IH, I DQ = 0mA CE VIN Vcc-0.2V, Vcc - 0.2V or VIN Vcc=3.0V -- -- 1 mA ICCSB1 Standby Current-CMOS 0.2V Vcc=3.0V -- 0.5 8 uA 1. Typical characteristics are at TA = 25oC. 2. These are absolute values with respect to device ground and all overshoots due to system or tester notice are included. 3. Fmax = 1/tRC . DATA RETENTION CHARACTERISTICS ( TA = 0 to + 70oC ) SYMBOL VDR ICCDR tCDR tR PARAMETER Vcc for Data Retention Data Retention Current Chip Deselect to Data Retention Time Operation Recovery Time O TEST CONDITIONS CE VIN CE VIN Vcc - 0.2V Vcc - 0.2V or VIN Vcc - 0.2V Vcc - 0.2V or VIN 0.2V 0.2V MIN. TYP. 1.5 -0 TRC (2) -- (1) MAX. -1 --- UNITS V uA ns ns 0.3 --- See Retention Waveform 1. Vcc = 1.5V, TA = + 25 C 2. tRC = Read Cycle Time R0201-BS616LV4010 3 Revision 2.3 April. 2002 BSI LOW VCC DATA RETENTION WAVEFORM ( CE Controlled ) Data Retention Mode BS616LV4010 VDR ≥ 1.5V Vcc VIH Vcc Vcc t CDR CE ≥ Vcc - 0.2V tR VIH CE AC TEST CONDITIONS Input Pulse Levels Input Rise and Fall Times Input and Output Timing Reference Level Vcc/0V 5ns 0.5Vcc KEY TO SWITCHING WAVEFORMS WAVEFORM INPUTS MUST BE STEADY MAY CHANGE FROM H TO L 1269 Ω OUTPUTS MUST BE STEADY WILL BE CHANGE FROM H TO L WILL BE CHANGE FROM L TO H CHANGE : STATE UNKNOWN CENTER LINE IS HIGH IMPEDANCE ”OFF ”STATE AC TEST LOADS AND WAVEFORMS 3.3V OUTPUT 100PF INCLUDING JIG AND SCOPE 1269 Ω 3.3V OUTPUT MAY CHANGE FROM L TO H DON T CARE: ANY CHANGE PERMITTED DOES NOT APPLY 5PF 1404 Ω INCLUDING JIG AND SCOPE , 1404 Ω FIGURE 1A THEVENIN EQUIVALENT 667 Ω ALL INPUT PULSES FIGURE 1B OUTPUT 1.73V Vcc GND 10% 90% 90% 10% → ← → ← 5ns FIGURE 2 AC ELECTRICAL CHARACTERISTICS ( TA = 0 to + 70oC , Vcc = 3.0V ) READ CYCLE JEDEC PARAMETER NAME PARAMETER NAME DESCRIPTION Read Cycle Time Address Access Time Chip Select Access Time Data Byte Control Access Time Output Enable to Output Valid Chip Select to Output Low Z Data Byte Control to Output Low Z Output Enable to Output in Low Z Chip Deselect to Output in High Z Data Byte Control to Output High Z Output Disable to Output in High Z Output Disable to Address Change BS616LV4010-70 MIN. TYP. MAX. BS616LV4010-10 MIN. TYP. MAX. UNIT ns ns ns ns ns ns ns ns ns ns ns ns tAVAX tAVQV tELQV tBA tGLQV tELQX tBE tGLQX tEHQZ tBDO tGHQZ tAXOX tRC tAA tACS tBA (1) tOE tCLZ tBE tOLZ tCHZ tBDO tOHZ tOH 70 -(CE) (LB,UB) (CE) (LB,UB) (CE) (LB,UB) ---10 10 10 0 0 0 10 ------------- -70 70 35 35 ---35 35 30 -- 100 ----15 15 15 0 0 0 15 ------------- -100 100 50 50 ---40 40 35 -- NOTE : 1. tBA is 35ns/50ns (@speed=70ns/100ns) with address toggle. ; tBA is 70ns/100ns (@speed=70ns/100ns) without address toggle. R0201-BS616LV4010 Revision 2.3 April. 2002 4 BSI SWITCHING WAVEFORMS (READ CYCLE) READ CYCLE1 (1,2,4) BS616LV4010 t RC ADDRESS t D OUT t OH AA t OH READ CYCLE2 (1,3,4) CE t ACS t BA LB,UB t BE D OUT t (5) CLZ t BDO t CHZ (5) READ CYCLE3 (1,4) t RC ADDRESS t OE AA t OE CE t OH t OLZ t CLZ (5) t ACS t OHZ (5) (1,5) t CHZ t BA LB,UB t BE D OUT NOTES: 1. WE is high in read Cycle. 2. Device is continuously selected when CE = VIL. 3. Address valid prior to or coincident with CE transition low. 4. OE = VIL . t BDO 5. Transition is measured ± 500mV from steady state with CL = 5pF as shown in Figure 1B. The parameter is guaranteed but not 100% tested. R0201-BS616LV4010 Revision 2.3 April. 2002 5 BSI AC ELECTRICAL CHARACTERISTICS ( TA = 0 to + 70oC , Vcc = 3.0V ) WRITE CYCLE JEDEC PARAMETER NAME PARAMETER NAME DESCRIPTION Write Cycle Time Chip Select to End of Write Address Setup Time Address Valid to End of Write Write Pulse Width Write recovery Time Date Byte Control to End of Write Write to Output in High Z Data to Write Time Overlap Data Hold from Write Time Output Disable to Output in High Z End of Write to Output Active BS616LV4010 BS616LV4010-70 MIN. TYP. MAX. BS616LV4010-10 MIN. TYP. MAX. UNIT ns ns ns ns ns ns ns ns ns ns ns ns t AVAX t E1LWH t AVWL t AVWH t WLWH t WHAX t BW t WLQZ t DVWH t WHDX t GHQZ t WHOX tWC tCW t AS t AW tWP t WR1 (1) tBW tWHZ tDW tDH tOHZ tOW 70 70 0 70 35 (CE,WE) (LB,UB) 0 30 0 30 0 0 5 ------------- -------30 --30 -- 100 100 0 100 50 0 40 0 40 0 0 10 ------------- -------40 --40 -- NOTE : 1. tBW is 30ns/40ns (@speed=70ns/100ns) with address toggle. ; tBW is 70ns/100ns (@speed=70ns/100ns) without address toggle. SWITCHING WAVEFORMS (WRITE CYCLE) WRITE CYCLE1 (1) ADDRESS t WC t WR OE (3) t CW CE (5) (11) t BW LB,UB t AW WE (3) t AS (4,10) t WP (2) t OHZ D OUT t t DW DH D IN R0201-BS616LV4010 6 Revision 2.3 April. 2002 BSI WRITE CYCLE2 (1,6) BS616LV4010 t WC ADDRESS t CW CE (5) (11) t BW LB,UB t AW WE t WR t WP (2) (3) t AS (4,10) t DH t WHZ D OUT (7) (8) t DW t DH (8,9) D IN NOTES: 1. WE must be high during address transitions. 2. The internal write time of the memory is defined by the overlap of CE and WE low. All signals must be active to initiate a write and any one signal can terminate a write by going inactive. The data input setup and hold timing should be referenced to the second transition edge of the signal that terminates the write. 3. TWR is measured from the earlier of CE or WE going high at the end of write cycle. 4. During this period, DQ pins are in the output state so that the input signals of opposite phase to the outputs must not be applied. 5. If the CE low transition occurs simultaneously with the WE low transitions or after the WE transition, output remain in a high impedance state. 6. OE is continuously low (OE = VIL ). 7. DOUT is the same phase of write data of this write cycle. 8. DOUT is the read data of next address. 9. If CE is low during this period, DQ pins are in the output state. Then the data input signals of opposite phase to the outputs must not be applied to them. 10. Transition is measured ± 500mV from steady state with CL = 5pF as shown in Figure 1B. The parameter is guaranteed but not 100% tested. 11. TCW is measured from the later of CE going low to the end of write. R0201-BS616LV4010 7 Revision 2.3 April. 2002 BSI ORDERING INFORMATION BS616LV4010 BS616LV4010 XX -- Y Y SPEED 70: 70ns 10: 100ns GRADE C: +0oC ~ +70oC I: -40oC ~ +85oC PACKAGE E: TSOP 2 A: BGA - 48 PIN(6x8mm) B: BGA - 48 PIN(8x10mm) D: DICE PACKAGE DIMENSIONS TSOP2-44 R0201-BS616LV4010 8 Revision 2.3 April. 2002 BSI PACKAGE DIMENSIONS (continued) NOTES: BS616LV4010 1: CONTROLLING DIMENSIONS ARE IN MILLIMETERS. 2: PIN#1 DOT MARKING BY LASER OR PAD PRINT. 3: SYMBOL "N" IS THE NUMBER OF SOLDER BALLS. 1.4 Max. BALL PITCH e = 0.75 D 8.0 E 6.0 N 48 D1 5.25 E1 3.75 D1 e VIEW A 48 mini-BGA (6 x 8mm) 0.05 E1 0.25 NOTES: 1: CONTROLLING DIMENSIONS ARE IN MILLIMETERS. 2: PIN#1 DOT MARKING BY LASER OR PAD PRINT. 3: SYMBOL "N" IS THE NUMBER OF SOLDER BALLS. 1.4 Max. SIDE VIEW D 0.1 D1 N 48 D 10.0 E 8.0 D1 5.25 E1 3.75 e 0.75 SOLDER BALL 0.35 0.05 e E1 VIEW A 48 mini-BGA (8 x 10mm) R0201-BS616LV4010 E 0.1 9 Revision 2.3 April. 2002 BSI REVISION HISTORY Revision 2.2 2.3 BS616LV4010 Description 2001 Data Sheet release Modify some AC parameters Date Apr. 15, 2001 April,11,2002 Note R0201-BS616LV4010 10 Revision 2.3 April. 2002
BS616LV4010BI 价格&库存

很抱歉,暂时无法提供与“BS616LV4010BI”相匹配的价格&库存,您可以联系我们找货

免费人工找货