BSIP10-12

BTCPower BSIP10-12 BSMT10-12 Series TM Broadband TelCom Power, Inc. Redefining “Current” Limits In Power Conversion 10A SIP & SMT 12V Input DC-DC Converters Features • • • • • • • • • Industry standard pin out High efficiency to 95% 300KHz switching frequency 9.0 – 14 Vdc input range Over temperature protection Continuous short circuit protection Remote On/Off Cost efficient open frame design UL / cUL 60950 certified Model Number Input Voltage Output Voltage Output Current Input Current No Load Full Load % Efficiency BSIP10-12-100 / BSMT10-12-100 BSIP10-12-120 / BSMT10-12-120 BSIP10-12-150 / BSMT10-12-150 BSIP10-12-180 / BSMT10-12-180 BSIP10-12-200 / BSMT10-12-200 BSIP10-12-250 / BSMT10-12-250 BSIP10-12-330 / BSMT10-12-330 BSIP10-12-500 / BSMT10-12-500 BSIP10-12-500A / BSMT10-12-500A 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 8.3 -14 Vdc 1.0 Vdc 1.2 Vdc 1.5 Vdc 1.8 Vdc 2.0 Bdc 2.5 Vdc 3.3 Vdc 5.0 Vdc 0.75-5.0 Vdc 10A 10A 10A 10A 10A 10A 10A 10A 10A 50 mA 50 mA 50 mA 60 mA 60 mA 60 mA 70 mA 70 mA 70 mA 992 mA 1163 mA 1404 mA 1666 mA 1832 mA 2264 mA 2956 mA 4385 mA 2956 mA 84 86 89 90 91 92 93 95 93% @ 3.3Vo Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: sales@btcpower.com DS BSIP10-12 Rev1 10-26-04 BSIP10-12 Series Specifications Input Specifications: 10A SIP&SMT 12Vi DC-DC Converters BTCPower TM Input Voltage Range…………….………12V………………... 9.0-14V Under voltage lock-out ………………power up ……………8.0V Typ. Power down ………..7.7V Typ. Input Filter……………………………………………………Capacitive Positive remove on /off control: Module On …………………………Open circuit or =Vin Module Off …………………………………….. < 0.4Vdc Output Specifications: Voltage Accuracy…………….. ………………………….+/- 1.5 % max. Transient response : 25% step load change ……………< 200 u sec. Ripple & Noise, 20 MHz BW (note3)………………….50 mV p-p max. 5Vo ………………………………...75 mV p-p max. Temperature Coeffcient………………………… +/- 0.03 % / ºC max. Short Circuit Protection………………………………..……Continuous Line Regulation (note1) ………………………….……..+/- 0.2 % max. Load Regulation (note2) …… …………….…….….….+/- 0.5 % max. Capacitive load, low ESR…………………………………8000uF max. General Specifications: Efficiency………………………………………………..……...see table Isolation Resistance………………………………………Non-isolation Switching Frequency……………………………………..300 KHz, Typ. Over temperature protection ………………….………….. 120 ºC Typ. Operating Temperature Range…………………………-40ºC ~ +85ºC Power derating curve …………………………………….. see fig. 1,2. Storage Temperature Range……………………..…..-55 ºC ~ +125ºC Dimensions: SIP package: 2.0” x 0.512” x 0.327“ (50.8 x 13.0 x 8.3 mm) SMT package: 1.3” x 0.53” x 0.366” (33.0 x 12.46 x 9.3 mm) Structure …………………………..Non-potted with open frame type Note: 1. 2. 3. 4. 5. Measured from high line to low line; Measured from full load to zero load; Measured with 10uF tantalum capacitor and 1 uF ceramic capacitor across output The input terminal recommend to parallel with 100uF capacitor ESR < 20 mohm Suffix “N” to the model number with Negative logic remote Model On: Open circuit or < 0.4Vdc Model Off: > +2.8Vdc to Vin Outline Information and Pin-out SMT Outline information Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: sales@btcpower.com DS BSIP10-12 Rev1 10-26-04 BSIP10-12 Series SIP Outline Inforamtion 10A SIP&SMT 12Vi DC-DC Converters BTCPower TM Dimensions are in Inches (millimeters) Tolerances: .XX ± 0.2” (.X ±0.5), unless otherwise noted .XXX ±0.01” (.XX ±0.25) PIN CONNECTION Pin 1 2 3 4 5 6 7 8 9 10 11 Function + Output + Output + Sense + Output Common Common + V Input + V Input No Pin Trim On / Off Control Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: sales@btcpower.com DS BSIP10-12 Rev1 10-26-04 BSIP10-12 Series 10A SIP&SMT 12Vi DC-DC Converters BTCPower TM Product Brief Temperature Typical Derating Curve Fig 1.: Typical Derating Curve of BSIP10-12 series Fig 2.: Typical Derating Curve of BSMT10-12 series Trim Resistor Values Vo (set) (V) 0.75 1.2 1.5 1.8 2 2.5 3.3 3.63 Rtrim (Kohm) Open 22.33 13 9 7.4 5 3.12 1.47 Fig 3.: Simplified Schematic The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: sales@btcpower.com DS BSIP10-12 Rev1 10-26-04