BSIP16-12-200

BTCPower BSIP16-12 BSMT16-12 Series TM Broadband TelCom Power, Inc. Redefining “Current” Limits In Power Conversion 16A SIP & SMT 12V Input DC-DC Converters Features • • • • • • • • • • Industry standard pin out High efficiency to 94% 300KHz switching frequency 9.0 – 14 Vdc input range 0.75-5.0Vdc wide output range Over temperature protection Continuous short circuit protection Remote On/Off Cost efficient open frame design UL / cUL 60950 certified Model Number Input Voltage Output Voltage Output Current Input Current No Load Full Load % Efficiency BSIP16-12-075 / BSMT16-12-075 BSIP16-12-120 / BSMT16-12-120 BSIP16-12-150 / BSMT16-12-150 BSIP16-12-180 / BSMT16-12-180 BSIP16-12-200 / BSMT16-12-200 BSIP16-12-250 / BSMT16-12-250 BSIP16-12-330 / BSMT16-12-330 BSIP16-12-500 / BSMT16-12-500 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 9.0 -14 Vdc 0.75 Vdc 1.2 Vdc 1.5 Vdc 1.8 Vdc 2.0 Vdc 2.5 Vdc 3.3 Vdc 5.0 Vdc 16A 16A 16A 16A 16A 16A 16A 16A 40 mA 50 mA 50 mA 60 mA 60 mA 65 mA 75 mA 75 mA 1299 mA 1928 mA 2326 mA 2727 mA 2996 mA 3704 mA 4783 mA 7092 mA 77 83 86 88 89 90 92 94 Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: sales@btcpower.com DS BSIP16-12 Rev1 10-26-04 BSIP16-12 Series Specifications Input Specifications: 16A SIP&SMT 12Vi DC-DC Converters BTCPower TM Input Voltage Range…………….………12V………………... 9.0-14V Under voltage lock-out ………………power up ……………8.0V Typ. Power down ………..7.7V Typ. Input Filter……………………………………………………Capacitive Positive remove on /off control: Module On …………………………Open circuit or =Vin Module Off …………………………………….. < 0.4Vdc Output Specifications: Voltage Accuracy…………….. ………………………….+/- 1.5 % max. Transient response : 25% step load change ……………< 200 u sec. Ripple & Noise, 20 MHz BW (note3)………………….50 mV p-p max. 5Vo ………………………………...75 mV p-p max. Temperature Coeffcient………………………… +/- 0.03 % / ºC max. Short Circuit Protection………………………………..……Continuous Line Regulation (note1) ………………………….……..+/- 0.2 % max. Load Regulation (note2) …… …………….…….….….+/- 0.5 % max. Capacitive load, low ESR…………………………………8000uF max. General Specifications: Efficiency………………………………………………..……...see table Isolation Resistance………………………………………Non-isolation Switching Frequency……………………………………..300 KHz, Typ. Over temperature protection ………………….………….. 130 ºC Typ. Operating Temperature Range…………………………-40ºC ~ +85ºC Power derating curve …………………………………….. see fig. 1,2. Storage Temperature Range……………………..…..-55 ºC ~ +125ºC Dimensions: SIP package: 2.0” x 0.512” x 0.327“ (50.8 x 13.0 x 8.3 mm) SMT package: 1.3” x 0.53” x 0.366” (33.0 x 12.46 x 9.3 mm) Structure …………………………..Non-potted with open frame type Note: 1. 2. 3. 4. 5. Measured from high line to low line; Measured from full load to zero load; Measured with 10uF tantalum capacitor and 1 uF ceramic capacitor across output The input terminal recommend to parallel with 100uF capacitor ESR < 100 mohm Suffix “N” to the model number with Negative logic remote Model On: Open circuit or < 0.4Vdc Model Off: > +2.8Vdc to Vin Outline Information and Pin-out SMT Outline information Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: sales@btcpower.com DS BSIP16-12 Rev1 10-26-04 BSIP16-12 Series 16A SIP&SMT 12Vi DC-DC Converters BTCPower TM SIP Outline Inforamtion Dimensions are in Inches (millimeters) Tolerances: .XX ± 0.2” (.X ±0.5), unless otherwise noted .XXX ±0.01” (.XX ±0.25) PIN CONNECTION Pin 1 2 3 4 5 6 7 8 9 10 11 Function + Output + Output + Sense + Output Common Common + V Input + V Input No Pin Trim On / Off Control Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: sales@btcpower.com DS BSIP16-12 Rev1 10-26-04 BSIP16-12 Series 16A SIP&SMT 12Vi DC-DC Converters BTCPower TM Product Brief Temperature Typical Derating Curve Fig 2.: Typical Derating Curve of BSMT16-12 series Fig 1.: Typical Derating Curve of BSIP16-12 series Trim Resistor Values Vo (set) (V) 0.75 1.2 1.5 1.8 2 2.5 3.3 3.63 Rtrim (Kohm) Open 22.33 13.0 9.0 7.4 5.0 3.12 1.47 Fig 3.: Simplified Schematic The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: sales@btcpower.com DS BSIP16-12 Rev1 10-26-04