HBO11A-48-24N

BTCPower BTCPower HBO PH Series Description TM Broadband TelCom Power, Inc. Redefining “Current” Limits In Power Conversion Up to 300W Half Bricks The HBO PH series of low cost DC/DC converters offer the different current levels and are comparable to existing halfbricks. With a wide input voltage range of 18-24V or 36-75V they are available with an output voltage of either 1.8, 2.5, 3.3, 5.0, 12, 15, 24 or 28 Volts. All models feature an input filter, output overvoltage and overtemperature protection, output current limiting and short circuit protection. The unique open frame construction with base plate design achieves efficient heat transfer with no hot spots. The use of patented Flat Transformer technology and other patentpending design concepts facilitate maximum power delivered. The converters combine creative design concepts with highly derated power devices to achieve very high reliability, high performance and offer a low cost solution to systems designers that are challenged to maximize power and minimize board space. Features • • • • • • • • Delivers up to 300W in Half Brick High efficiency patented topology Low profile of only 0.34 inch 1.8V, 2.5V, 3.3V, 5.0V, 12V, 15V, 24V or 28V output modules 100V/100ms Input transient capability -40°C to +85 °C ambient operation Meets Basic Insulation requirements of EN60950 UL 1950 recognized, CAN / CSA C22.2 No. 950-95 Certified, and TUV EN60950 ( pending ) Specification Summary • 80A @ 1.8V, 60A @ 2.5V, 60A @ 3.3V, 50A @ 3.3V, 50A @ 5.0V, 21A @ 12V 11A @ 24V, 11A @ 28V • Tight output regulation, typical ±2% • No minimum load required • Ripple & Noise (20Mhz BW) 100 mV (pk-pk) or 2% (pk-pk) • Wide input operating range 18-24V or 36-75V • On/Off pin and remote sense • Output adjustment +/-10% range • Meets conducted limits of FCC Class B and CEI IEC61204-3 Class B with external filter Applications • • • • • • • Telecommunications Data Communications Wireless Communications Networking Gear Servers, Switches and Data Storage Semiconductor Test Equipment Distributed Power Architecture • 1500V, 10M input-to-output isolation • Frame construction with heat spreader for low temperature rise • Output overcurrent and overvoltage protection • Over Temperature protection • Input Under voltage protection • MTBF of 1,600,000 hours @ 50°C ( Bellcore ) Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840 • www.btcpower.com • Email: sales@btcpower.com PB HBO PH Rev3 16-1-04 HBO PH Series Up to 300W Half Bricks BTCPower BTCPower TM Product Brief Part Number and Selection Information Model Part Number Positive Logic HBO60A-24-2.5P HBO50A-24-3.3P HBO50A-24-5P HBO21A-24-12P HBO17A-24-15P HBO11A-24-24P HBO11A-24-28P HBO80A-48-1.8P HBO60A-48-2.5P HBO60A-48-3.3P HBO50A-48-3.3P HBO50A-48-5P HBO21A-48-12P HBO17A-48-15P HBO11A-48-24P HBO11A-48-28P Negative Logic HBO60A-24-2.5N HBO50A-24-3.3N HBO50A-24-5N HBO21A-24-12N HBO17A-24-15N HBO11A-24-24N HBO11A-24-28N HBO80A-48-1.8N HBO60A-48-2.5N HBO60A-48-3.3N HBO50A-48-3.3N HBO50A-48-5N HBO21A-48-12N HBO17A-48-15N HBO11A-48-24N HBO11A-48-28N Voltage (Volts) Nominal 24 24 24 24 24 24 24 48 48 48 48 48 48 48 48 48 Range 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 36-75 36-75 36-75 36-75 36-75 Input Current (A) No load 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 Full load 8.0 8.5 12.4 12.2 12.0 12.8 14.7 3.9 3.9 5.0 4.2 6.2 6.1 6.0 6.4 7.3 Output Voltage (Volts) 2.5 3.3 5.0 12.0 15.0 24.0 28.0 1.8 2.5 3.3 3.3 5.0 12.0 15.0 24.0 28.0 Current (Amps) 60 50 50 21 17 11 11 80 60 60 50 50 21 17 11 11 Efficiency 75% Load (%) 78 81 84 86 88 86 87 78 79 81 82 85 87 89 87 88 Typical at Ta= +25 ºC under nominal line voltage and 75% load conditions, unless noted. Consult factory for other output voltage configurations and optional accessories such as heatsinks and filters. Outline Information and Pin-out Pin Connection Pin# Function 1 2 3 4 5 6 7 8 9 Vin + On/Off Case Vin Vout Sense Trim Sense + Vout + All dimensions are in inches [mm] Pin 5 and 9 are dia. 0.08 [2.03] All other pins are all dia. 0.040 [1.02] Pin material: Brass Pin finish: Tin/Lead plated Heat spreader (baseplate) material: Aluminum Weight: 50.5g The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840 • www.btcpower.com • Email: sales@btcpower.com PB HBO PH Rev3 16-1-04