A1050OAAAC

22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 Indicator Lights 16/11/11 10:40 Page 66 Neon, LED and Filament Lamp ៉ Neon, LED, mains LED or filament lamp ៉ Bezel sizes from 6.7 to 16.3mm diameter LED - DC Red, Yellow, Green, Blue, White ៉ Red, amber, green, blue and 2.0/2.2V Resistors for other voltages available. clear lenses LED - AC Red, Yellow, Green, Blue, White ៉ Red, yellow, green, blue and 110-230V ac operation. white LEDs Filament lamp Available with Red, Amber, Green, Clear or Blue lenses ៉ Wide choice of styles 6V, 12/14V, 24/28V. Colours and voltages: Neon DC AC Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) To create a catalogue number: Refer to the 2 columns below (terminal and type), then state: Lens colour, voltage and whether neon, LED or filament lamp TERM B 2.8 TYPE PANEL & ˚C (B) 0566 A ILLUM’N APPROVAL OPTIONS DIMENSIONS (mm) 6.0 L 2.0max DC 12.0 23.7 2.7 Ø7.0 12.0 23.7 2.3 Ø7.0 12.0 23.7 1.0 Ø7.0 32.5 1.5 200.0 AC page 6 B 2.8 (B) 0566 B 6.0 L 2.0max DC 200.0 AC page 6 B 2.8 (B) 0566 C 6.0 L 2.0max DC 200.0 AC page 6 C 6.3 (C) 0145 AA 5.8 3.0max DC 0.9 AC 14.0 Ø6.7 indicators page 6 L (L) 1041 OO Chrome bezel 6.3 W 6.3max DC 10.2 4.3 Ø7.6 page 6 L (L) 1045 OO Chrome bezel available 6.3 W 10.0max DC 22.6 4.3 AC page 6 66 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com Ø7.6 22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 TERM TYPE (L) 0245 OO L 16/11/11 PANEL & ˚C Chrome bezel available 10:40 Page 67 ILLUM’N APPROVAL OPTIONS DIMENSIONS (mm) 7.1 W 6.3max DC 22.5 4.2 AC Ø7.6 page 6 L 2950 OO L Chrome bezel available 8.0 12.6 0.8-1.6 DC Ø9.0 AC 27.0 3.9 Ø7.5 page 6 (L) 0195 BB L 8.0 Ø9.5 C 6.3 0.8-3.0 18.0 page 6 L 2951 OO L Chrome bezel 12.5 13.7 7.9 8.0 0.8-1.6 Ø9.5 11.0 3.7 DC Ø9.8 AC 27.0 Ø7.5 8.5 page 6 8.0 4 Deep lens profile indicators (H) 0568 A(*) L H 4.8 0.8-3.5 DC 13.0 9.5 27.5 27.5 page 6 (VDE at T100) L (H) 0568 B(*) Shallow lens profile 3.0 Ø10.0 *Final suffix (X) - Long barrier *Final suffix (Y) - Short barrier *Final suffix (L) - For Wires 8.0 H 4.8 0.8-3.5 DC 13.0 9.5 page 6 27.5 27.5 2.3 Ø9.5 *Final suffix (X) - Long barrier *Final suffix (Y) - Short barrier *Final suffix (L) - For Wires 67 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 Indicator Lights 16/11/11 AC Page 68 Neon, LED and Filament Lamp Colours and voltages: DC 10:41 Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) LED - DC Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. LED - AC Red, Yellow, Green, Blue, White 110-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. ៉ Neon, LED, mains LED or filament lamp ៉ Bezel sizes from 6.7 to 16.3mm diameter ៉ Red, amber, green, blue and clear lenses ៉ Red, yellow, green, blue and white LEDs ៉ Wide choice of styles To create a catalogue number: Refer to the 2 columns below (terminal and type), then state: Lens colour, voltage and whether neon, LED or filament lamp TERM L TYPE PANEL & ˚C ILLUM’N APPROVAL OPTIONS DIMENSIONS (mm) 3 (L) 0569 AW 9.0 19.0 3.0 DC 0.8-2.5 Call sales L (C) 0273 OO 2.0 max H 4.8 (C) 0278 OO 12.0 Ø10.0 22.2 32.8 3.1 Ø12.2 33.5 9.0 2.0 max H 4.8 DC 22.3 23.5 3.5 12.0 Sq. AC page 6 C 6.3 (C) 0276 AA 23.5 9.5 K 2.8 0.8-2.8 H 4.8 indicators 8.5 max AC K 2.8 DC 22.2 33.0 4.0 Ø12.0 AC 33.7 page 6 C 6.3 L DC page 6 C 6.3 L 23.0 9.0 K 2.8 L AC 16.0 (C) 0275 OO 10.0 K 2.8 12.0 max H 4.8 22.2 32.5 3.0 Ø13.3 AC page 6 C 6.3 L DC (C) 0275 OO 32.7 16.0 Chrome bezel 10.0 Ø13.3 K 2.8 11.5 max 22.2 H 4.8 C 6.3 DC 32.0 32.5 AC page 6 32.7 68 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 3.5 3.0 Ø15.6 22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 TERM L TYPE 16/11/11 PANEL & ˚C (C) 0276 OO 2.8 max H 4.8 ILLUM’N APPROVAL OPTIONS DIMENSIONS (mm) DC 22.2 4.0 33.0 Ø12.0 AC page 6 C 6.3 K 2.8 Page 69 10.0 K 2.8 L 10:41 (C) 0277 OO Chrome bezel (C) 0277 OO Chrome bezel 33.7 14.9 10.0 12.0 max DC 3.3 22.2 8.3 53.7 H 4.8 Ø14.6 AC page 6 C 6.3 32.2 L (C) 0273 LL K 2.8 0.6-2.0 H 4.8 16.6 Ø8.8 12.0 H 4.8 DC AC 10.0 22.8 10.0 22.8 1.6 5.0 Ø13.6 page 6 (C) 2821 OO K 2.8 12.0 or 12.7 ø12.0 = 0.8-2.5 ø12.7 = 1.1-2.5 H 4.8 indicators C 6.3 DC AC page 6 C 6.3 (C) 0586 OO Ø14.5 12.5 K 2.8 0.8-1.5 H 4.8 C 6.3 18.4 35.7 (C) 2820 OO 0.75-2.0 L 22.2 page 6 K 2.8 L DC AC C 6.3 L For sub-panel mounting, behind a facia. 10.0 DC AC page 6 10.0 25.1 1.8 15.5 Sq 69 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 Indicator Lights 16/11/11 AC Page 70 Neon, LED and Filament Lamp Colours and voltages: DC 10:41 Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) LED - DC Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. LED - AC Red, Yellow, Green, Blue, White 110-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. ៉ Neon, LED, mains LED or filament lamp ៉ Bezel sizes from 6.7 to 16.3mm diameter ៉ Red, amber, green and clear lenses ៉ Red, yellow, green, blue and white LEDs ៉ Wide choice of styles To create a catalogue number: Refer to the 2 columns below (terminal and type), then state: Lens colour, voltage and whether neon, LED or filament lamp TERM L TYPE PANEL & ˚C (C) 2870 OO 0.75-2.0 H 4.8 DC AC 9.9 22.8 5.0 Ø13.6 10.5 21.6 3.2 Ø15.9 page 6 C 6.3 (C) 0589 OO 12.7 K 2.8 0.8-1.5 H 4.8 DC AC page 6 C 6.3 L DIMENSIONS (mm) 12.7 K 2.8 L ILLUM’N APPROVAL OPTIONS L 0081 OO Chrome bezel 12.7 9.5 DC Ø16.0 AC 18.0 11.4 page 6 L (C) 0177 OO Chrome bezel 14.9 12.7 K 2.8 12.0max indicators H 4.8 22.2 3.3 8.3 53.7 Ø14.6 AC 32.2 (C) 0067 OO Chrome bezel 12.7 K 2.8 1.14max H 4.8 DC AC page 6 C 6.3 L DC page 6 C 6.3 L Ø18.3 (C) 0180AA 38.1 5.1 Ø16.0 5.1 Ø15.0 12.7 C 6.3 19.0max DC 10.4 22.3 Starlock fixing page 6 21.3 70 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 1.3 22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 TERM L TYPE (C) 0180BB 16/11/11 PANEL & ˚C Chrome bezel 10:41 Page 71 ILLUM’N APPROVAL OPTIONS 13.5 C 6.3 0.9-1.14 DC 10.4 page 6 L (C) 0579 OO 22.35 5.1 Ø16.3 25.4 Ø15.9 14.0 K 2.8 2.5max H 4.8 DC AC 10.0 page 6 C 6.3 C 6.3 DIMENSIONS (mm) (C) 1092 3.2 19.0 4.0max AC page 6 Ø22.9 26.9 15.0 max Ø22.9 indicators 71 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 Indicator Lights 16/11/11 AC Page 72 Neon, LED and Filament Lamp Colours and voltages: DC 10:41 Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) LED - DC Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. LED - AC Red, Yellow, Green, Blue, White 110-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. ៉ Neon, LED, mains LED or filament lamp ៉ Bezel sizes from 6.7 to 16.3mm diameter ៉ Red, amber, green and clear lenses ៉ Red, yellow, green, blue and white LEDs ៉ Wide choice of styles To create a catalogue number: Refer to the 2 columns below (terminal and type), then state: Lens colour, voltage and whether neon, LED or filament lamp TERM H 4.8 TYPE H 0581 AY PANEL & ˚C ILLUM’N APPROVAL OPTIONS 18.2/18.3 x 6.2/6.3* DIMENSIONS (mm) 20.0 18.0 2.0-3.5 2.0 9.0 19.0 page 6 L L 0234 OO 9.27/9.50 x 4.75* L77 3.3 4.3 11.0 9.0 0.71-1.62 page 6 8.0 6.0 11.3 26.3 32.3 8.0 M1068 L L 0233 OO Ø6.4 60.0 indicators page 6 72 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com Neon tube, resistor and flexible lead assembly, protected by “shrunk on” transparent sleeving. Red & Amber 22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 Indicator Lights 15:51 Page 73 To match 8500, 8600, R13, 1500, 1550, 5500, 8300 and 7000 switches Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses Filament lamp 17/11/11 ៉ Indicator lights ៉ Neon or filament lamp ៉ Bezel sizes from 6.7 to 16.3mm 100/130V (marked 110V), 200/250V (marked 230V) Available with Red, Amber or Green lenses 6V, 12/14V, 24/28V diameter ៉ Red, amber green and clear neons ៉ Red, amber and green filament lamps To create a catalogue number: ៉ Styles to match rocker and push Refer to the 2 columns below (terminal and type), then state: Lens colour, voltage and whether neon or filament lamp. TERM TYPE ILLUM’N APPROVAL OPTIONS H8580 AB H 4.8 switches Body Code B Body Code B T X R9 92B H 4.8 Panel thickness X Y 0.75-1.25 1.25-2.0 2.0-3.0 19.1/19.2 19.3/19.4 19.7/19.8 12.9/13.0 12.9/13.0 12.9/13.0 Flange Cut-out Panel thickness 21.0 X Full product details on pages 14-15 H8630 FB H 4.8 Cut-out Full product details on pages 12-13 Y 15.0 Cut-out Flange Cut-out X 0.75-1.25 19.1/19.2 1.25-2.0 19.3/19.4 2.0-3.0 19.7/19.8 Y 21.0 X 12.9/13.0 12.9/13.0 12.9/13.0 Full product details on pages 33 Y 15.0 Cut-out Flange Snap fixing in panels thickness up to 3.0 2.2 Approvals details - contact sales H 4.8 DC K 2.8 U T C0480 A C 6.3 H 4.8 C 6.3 H 4.8 U Body Code A B L R T C7030 AH Cut-out Y X 12.2/12.3 11.0/11.1 11.0/11.1 14.0/14.1 11.5/11.6 27.2/27.3 30.0/30.1 30.0/30.1 28.5/28.6 28.2/28.3 Cut-out Y X 22.3/22.4 22.1/22.2 22.1/22.2 23.0/25.4 22.3/22.4 27.2/27.3 30.0/30.1 30.0/30.1 28.4/28.5 28.2/28.3 14.0 14.0 14.0 17.0 14.0 30.2 33.4 31.9 31.5 30.2 X X Y Y Cut-out Flange Flange Y X 25.0 25.0 25.0 28.9 25.0 30.2 33.4 32.0 33.2 30.2 Full product details on pages 44-45 Body Code H Flange Flange Y X Full product details on pages 28-29 DC K 2.8 T Body Code A B L R Ø23.0 indicators T Cut-out Full product details on pages 22-23 C0430 A C 6.3 0.9 Ø20.2 Cut-out Flange Ø25.0/25.2 Ø28.0 X X Y Y Cut-out Flange 25.0/25.2 Ø28.0 73 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:48 Page 74 Low Voltage Lampholders Colour and voltage: ៉ Up to 50V ៉ Red, Amber, Green, Blue and Clear ៉ Linestra/Philinea lamp holder These lampholders are suitable for up to 50V max. Bulbs will be supplied (dependent on order quantity) if a voltage is specified. Colours - Red, Amber, Green, (Clear & Blue, check availability). To create a catalogue number: Refer to the 2 columns below (terminal and type), then state: Lens colour and voltage. TERM TYPE T0061 OO (LES) T DIMENSIONS (mm) PANEL & ˚C 9.5 0.9-1.14 6.3 T85 23.7 4.8 Ø12.7 6 Rear of panel bulb replacement C 6.3 C0067 OO (BA7s) Chrome bezel 12.7 1.14max T T0062 AO (Midget flange) Chrome bezel Ø16.0 5.1 44.5 T85 Rear of panel bulb replacement 12.7 9.6max 9.1 21.3 T0063 AO (LES) T T0062 MO (Midget flange) T85 Ø14.7 Front of panel bulb replacement Chrome bezel 12.7 indicators 9.6max T0063 MO (LES) S 9.1 21.3 T85 Ø14.7 Front of panel bulb replacement S0095 OO Lamp 4.7mm CS Hole 13.5 Holders 38.1 17.5 33.3 25.4 Paired Architectural lampholders for Linestra or Philinea lamp. T85 74 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:48 Page 75 Low Voltage Lampholders ៉ Up to 50V Bulbs will be supplied (dependant on order quantity) if a voltage is specified. These lampholders are suitable for up to 50V max. ៉ MES or MBC bulb ៉ Flat and domed lens Colours - Red, Amber, Green, (Clear & Blue, check availability). Brass bodies have polished chrome finish. ៉ Brass or nylon bodies ៉ Red, Amber, Green, Blue and Clear lenses C1090FP - - - For Neon & Mains versions see page 71 For Sealed version see page 80 P1090FL - - - C 1090 F A - - TERMINAL LAMP CAP LENS BODY VOLTAGE, COLOUR, ETC TERMINAL C LAMP CAP LENS 1090 F MES (E10) Flat DIMENSIONS mm THREADED BODY 1090 (MES lamps) Panel Body Hole Dia. Material 9.1 Dim. A Dim. B A 19.0 Brass 35.0 22.0 D 19.0 Brass 30.2 22.0 E 19.0 Nylon 30.2 with chrome bezel 30.2 22.0 22.8 G 19.0 Brass 24.6 22.0 H 19.0 Nylon 24.6 with chrome bezel 24.6 22.0 22.8 L 25.4 Brass 26.0 31.5 Dim. A Dim. B B 6.3 x 0.8 A T V Domed 9.1 Ø2.0 4.8 OPTIONS F0445 MO Solder 1091 1091 (MBC lamps) Panel Body Hole Dia. Material L 9.1 Screw and Clamp No lens B 19.0 Brass 36.0 22.0 C 19.0 Nylon 36.6 22.0 Q 19.0 Nylon (+ chrome trim) 36.6 22.8 M 25.4 Brass 38.1 31.5 indicators MBC (BA9s) (C and S Terminals only) S P.V.C. Insulating terminal cover. Panel thickness 5.0, except A type body 10.0 75 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:48 Page 76 LED Lamps and LED Lampholders LED Lampholders can be supplied with or without LEDs Colours: Red, Yellow, Green and Blue LEDs (High Intensity is standard. Option of extra super bright). Voltages: LEDs are available for direct connection to 2.0/2.2V or 12Vdc For other voltages contact sales. ៉ LED lampholders ៉ Supplied with or without LEDs ៉ Black or Chrome finish Approvals and specifications To create a catalogue number: Refer to the 2 columns below (terminal and type), then state: LED colour and voltage and body finish (Black or Chrome). TERM W LED fitted TYPE DIMENSIONS (mm) PANEL & ˚C (W) 1047 OO 6.3 A LED not fitted 1.5 6.3max L LED & Wires 12.7 13.9 fitted T85 3mm LED W LED fitted Ø7.6 (L) 1048 OO 8.0 A LED not fitted 2.0 5.5max 2 10.0 14.5 L LED & Wires Ø9.5 fitted T85 5mm LED W LED fitted (W) 1050 OO 8.0 A LED not fitted 2.9 7.0max 12.4 16.9 L LED & Wires fitted 5mm LED with focusing reflector W LED fitted (L) 1035 OA Ø10.0 T85 4.5 20.0 1.0 4.30 0.9-1.6 L LED & Wires 1.50 200.0 fitted 5.08 5 indicators T85 W LED fitted (L) 1036 OA 6.0 20.0 1.0 5.85 0.9-1.6 L LED & Wires 200.0 4.0 fitted 7.9 T85 W LED fitted (L) 1037 OA 6.35 20.0 1.0 6.15 0.9-1.6 L LED & Wires 200.0 4.0 7.9 7 fitted T85 76 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:48 Page 77 Neon & LED Indicator Lights Sealed to IP52 and IP54 Colours and voltages: Neon Red, Amber, Green ៉ IP52 and IP54 sealing Approvals and specifications ៉ Three bezel sizes: 18.0, 20.5 120 or 230Vac 0.5W - please specify (Red base) Red, Amber, Green 28Vac/dc 1W (Green base) Neon versions feature integral current limiting & ghost lighting resistors. LED versions have rectifier diodes & resistors for direct connection to 28Vac/dc. LED To order and 30.0 diameter ៉ Neon or LED indicator Approval shown for neon versions only ៉ Black and satin chrome bezel or without bezel ៉ Recessed screw terminals Select a number from the “type” column, then state: Lens colour, voltage and whether neon or LED. All versions have recessed screw terminals. IP52 is standard. A panel sealing washer is available for IP54. TERM Recessed Screw TYPE 3130 PANEL & ˚C No bezel DIMENSIONS (mm) 13.2 8.0max Ø13.0 36.0 T120 neon T50 LED Recessed Screw 3160 Black bezel Ø18.0 45.0 16.2 5.0max 9.0 Ø16.0 2.0 T120 neon T50 LED Recessed Screw 3161 Satin chrome style bezel 34.0 45.0 16.2 5.0max Ø Ø20.5 4.0 Ø16.0 2.0 T55 neon T50 LED Recessed Screw 3221 Large black bezel 34.0 45.0 22.3 4.5max Ø20.5 4.0 Ø22.0 2.0 Ø30.0 indicators 14.0 38.0 T120 neon T50 LED Select the version most suitable for your application from the 4 types shown. Or call sales for availability to your special requirements. 77 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:49 Page 78 Indicator Lights - Sealed to IP67 Colours and voltages: ៉ IP67 Panel Sealing ៉ Supplied complete with gaskets/’O’ rings ៉ Neon, LED, mains LED or LED - DC Red, Yellow, Green, Blue, White DC filament lamp 2.0/2.2V Resistors for other voltages available. ៉ Bezel sizes from 7.6 to 22.9mm LED - AC Red, Yellow, Green, Blue, White AC diameter 110-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses ៉ Red, amber, green, blue and clear lenses 6V, 12/14V, 24/28V. ៉ Red, yellow, green, blue and To create a catalogue number: white LEDs Refer to the 2 columns below (terminal and type), then state: Lens colour, ៉ Wide choice of styles Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) voltage and whether neon, LED or filament lamp TERM L TYPE (L) 1041 OS PANEL ILLUM’N OPTIONS APPROVAL DIMENSIONS (mm) Chrome bezel 6.3 DC 5.3 max L (L) 0245 OS 4.5 9.9 AC Ø9.5 D Chrome bezel 7.1 DC 4.6 max 22.2 4.5 AC Ø9.5 15.5 L (C) 0275 OS Chrome bezel 10.0 C 6.3 DC 22.2 11.5 max K 2.8 Ø15.6 AC H 4.8 L 3.5 32.0 32.2 (C) 0277 OS 14.9 Chrome bezel 10.0 C 6.3 DC 11.5 max indicators K 2.8 8.3 53.7 Ø14.6 AC H 4.8 L 3.3 22.2 32.2 (C) 0177 OS 14.9 Chrome bezel 12.7 C 6.3 DC 22.2 11.5 max K 2.8 8.3 Ø14.6 AC H 4.8 C 6.3 3.3 53.7 D (C) 1092 FFS 32.2 19.0 DC 4.0 max AC D 78 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 28.5 12.5 max Ø22.9 23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:49 Page 79 LED Lamps and LED Lampholders - Sealed to IP67 LED Lampholders can be supplied with or without LEDs Colours: Red, Yellow Green and Blue LEDs. (High Intensity is standard. Option of extra super bright). Voltages: LEDs are available for direct connection to 2.0/2.2V or 12Vdc. For other voltages contact sales. ៉ ៉ ៉ ៉ IP67 front bezel sealing LED lampholders Supplied with or without LEDs Black or Chrome finish To create a catalogue number: Refer to the 2 columns below (terminal and type), then state: LED colour and voltage and body finish (Black or Chrome). TERM W TYPE PANEL & ˚C ILLUM’N OPTIONS 8.0 DC (W) 1048 OA APPROVAL DIMENSIONS (mm) 1.0 LED fitted 5.5max A AC 2.0 LED not fitted 5mm LED L L 1048 OA T85 8.0 5.5max D 11.0 15.5 1.0 DC AC 2.0 LED & Wires fitted 5mm LED W (W) 1050 OA 11.0 15.5 T85 8.0 LED fitted 7.0max AC 2.9 5mm LED with focusing reflector L L 1050 OA 13.4 17.9 T85 8.0 7.0max Ø 9.5 1.0 DC A LED not fitted Ø 9.5 Ø 10.0 1.0 DC AC 2.9 LED & Wires fitted T85 D Ø10.0 indicators 5mm LED with focusing reflector 13.4 17.9 Properties Sealing LED wires or PVC covered wire leads O-ring sealing equivalent to IP67, of both the LED to bezel, and bezel to panel is available where shown. 125mm min length wires, 6.3mm standard strip. Alternative colours, length and strip available. Polarity The nylon base mouldings are polarity marked. Body Material and Finish Chromed brass or Black oxide coated brass. Lampholders only Items prefixed ‘A’ are supplied without LEDs. 79 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com 23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:49 Page 80 Low Voltage Lampholders - Sealed to IP67 Colour and voltage: These lampholders are suitable for up to 50V max. Bulbs will be supplied (dependent on order quantity) if a voltage is specified. Colours - Red, Amber, Green, (Clear & Blue, check availability). To create a catalogue number: Refer to the 2 columns below (terminal and type), then state: Lens colour and voltage. TERM C 6.3 TYPE ៉ IP67 Panel seal ៉ Supplied complete with gaskets/‘O’ rings ៉ Up to 50V ៉ Red, Amber, Green, Blue and Clear ៉ LES, Midget Flange, MES & MBC bulb PANEL C1090 FPS (MES) ILLUM’N OPTIONS DIMENSIONS (mm) APPROVAL 19.0 4.0 max 30.2 T85 12.5 max Front of panel bulb replacement C 6.3 C1091 FQS (MBC) 19.0 4.0 max T85 T T0062 AOS (Midget flange) Chrome bezel T0063 AOS (LES) Chrome bezel 35.0 3 Front of panel bulb replacement 12.5 max 12.7 8.5 max T85 T T0062 MOS (LES & Midget flange) T0063 MOS (LES) 21.3 9.5 Ø14.7 21.3 9.1 Ø14.7 12.7 8.5 max indicators T85 F0445 MO P.V.C. Insulating terminal cover. For use with C1090 & C1091 80 tel: +44 (0)20 8979 3232 • Arcolectric • email: europe@elektron-technology.com