FX0430/63

Introduction Fuseholders Bulgin’s extensive range of fuseholders are designed to give the degree of protection demanded in today’s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA and IMQ, all types are manufactured from high grade flame retardant nylon and polyester materials. Designed primarily for 5 x 20mm and 6.3 x 32mm size fuses with protection against shock to categories PC1, PC2 and PC3. There’s a choice of styles for Inline, PCB mounting and panel mounting (screw or snap fit) with terminal options for solder, 2.8mm, 4.8mm or 6.3mm tabs or PC spills.Dust and waterproof designs provide a front of panel seal to IP68 in both 5 x 20mm and 6.3 x 32mm size fuses. Fuse carrier styles include captive drawer, screw cap - with screw driver release, bayonet cap - with screw driver release and screw cap - with finger release. Panel/PC Mounting Captive Carriers Touchproof, PC3 Panel Mounting Touchproof, Sealed to IP68, PC2 Panel Mounting Touchproof, Sealed to IP66, PC1 PC Mounting PC1, PC2 and PC3 Base Mounting, PC1 Inline PC1 and Inline Sealed to IP66, PC1 449 456 457 458 460 461 Fuseholders 447 Fuseholders Protection Category Category PC1: No integral protection against electric shock. If required, Designers/ Manufacturers must provide additional protection against electric shock on equipment. Category PC2: With integral protection against electric shock. Fuseholders shall have live parts inaccessible to IEC 60529 Standard Test Finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn. Category PC3: With integral protection against electric shock. Fuseholders shall have live parts inaccessible to IEC 60529 1mm dia. rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse, is being inserted or withdrawn. 448 Fuseholders Fuseholders Panel/PC Mounting Captive Carriers Touchproof, PC3 Snap Fit to Panel Protection Category PC3 Fuse Size 5 x 20mm Panel Thickness 1.0, 1.5, 2.0 & 3.0mm Captive Drawer 10A, 250V (16A, 250V UL) 2.8, 4.8 or 6.3 tabs FX0430/63 Snap Fit to Panel Protection Category PC3 Fuse Size 5 x 20mm Panel Thickness 1.0, 1.5, 2.0 & 3.0mm Captive Drawer 10A, 250V (16A, 250V UL) PC spills FX0430/PC Specifications FX0430/Termination FX0430/PC Fuse Size: 5 x 20mm 5 x 20mm Fuse Carrier: Captive Drawer Captive Drawer Terminations: /28 (2.8mm solder), /48 (4.8mm tab), /63 (6.3mm tab) /PC (PC spills) Max. Rating: 10A, 250V (16A, 250V AC UL) 10A, 250V (16A, 250V AC UL) Max. Power Dissipation: 2.5W (@ 23ºC) 2.5W (@ 23ºC) Insulation Resistance: >10MΩ @ 500V DC >10MΩ @ 500V DC AC Breakdown: >2kV >2kV Contact Resistance: 10²MΩ @ 500V DC AC Breakdown: 7kV @ 50Hz 7kV @ 50Hz Contact Resistance: 10²MΩ @ 500V DC >10²MΩ @ 500V DC A.C. Breakdown: 7kV @ 50Hz 7kV @ 50Hz 7kV @ 50Hz Contact Resistance: 10²MΩ @ 500V DC A.C. Breakdown: >2kV @ 50Hz >7kV @ 50Hz >7kV @ 50Hz Contact Resistance: 3.5kV @ 50Hz >3.5kV @ 50Hz Contact Resistance: 10²MΩ @ 500V DC >10⁴MΩ @ 500V DC AC Breakdown: >2kV 4kV @ 50Hz 6kV @ 50Hz Contact Resistance: 10⁴ MΩ @ 500V DC AC Breakdown: 7kV @ 50Hz (Clip to clip) 1.5kV @ 50Hz 2kV @ 50Hz Contact Resistance: