H8630FBNAA

8600 Rocker Switches - Miniature 10A 250Vac Single & Double Pole  Miniature rocker switch 10(4)A 250Vac T90 (unless noted below)  Ratings up to 16A, 250Vac UL CSA See ratings below UL 65˚C, file E45221, CSA file LR10990  Single & double pole  ON/OFF, C/O, biased and In house test  Push on, solder and PCB RoHS Inrush 50A to EN61058-1 & 10A 24Vdc centre off switching RoHS compliant terminals  Illuminated and non- 3mm contact gap except where marked µ. Technical data on pages 4 & 5 (switches), 6 (indicators). illuminated rocker switches  Matching indicators  Panel cut out single: 19.3 x 12.9 double: 19.3 x 21.9 H 8653 V B --TERMINAL FUNCTION ROCKER BODY PRINT, COLOUR, VOLTAGE ETC TERMINAL FUNCTION H 7.4 Approvals & ratings vary with function ON OFF Switches are ON when pressed over terminal 3 8600 4.8 x 0.8 ON - OFF ON - OFF (momentary ON) T 6.4 O / 2.2 1 2 3 ON - OFF (momentary OFF) 3.5 x 0.8 Solder PCB 0.8 Sq ON - ON ON - ON (momentary 1 side) ON - OFF - ON Double Pole switches with “X” terminals are supplied without terminal barriers 14 4 5 6 8650 10(4)A 10A 277V 1 /2HP 277V, 1/4HP 125V 8601 8651 6(1)A 16A 250V, 6A 277V 6(1)A 6A 277V 8602 8652 10A 16A 250V, 10A 277V 10(4)A 6A 277V N/A 8653 V Curved (lit) D Paddle lever (Single pole non-lit only) 10(4)A 6A 277V X 5.3 V Curved 1 2 3 10(4)A 16A 250V, 10A 277V 1 /2HP 277V, 1/4HP 125V ON - OFF Lit 3.7 ROCKER 8610 8660 6(1)A 10A 277V 1 /2HP 277V, 1/4HP 125V 6(1)A 8611 8661 6A 277V 6A 277V 8620 µ 8670 µ See page 16 See page 16 10A 277V, 1/2HP 277V H Slotted for actuator (8600 and 8610 only) /2HP 277V, 1/4HP 125V 1 8630 Indicator tel: +44 (0)20 8979 3232 • Arcolectric • email: info@arcoswitch.co.uk F Flat Indicator only (Single pole) H8600VB --- H8630FB --- T8600VB --- T8600VB --- T8630FB --- H8650VB --- H8660VB --- H8653VB --- T8650VB --- T8660VB --- T8653VB --- rocker switches H8600VB --- BODY OPTIONS B Single pole Finish DIMENSIONS (mm) Single pole Double pole Matt finish only. Panel cut-out Bezel Colour Call sales for custom colours. A full range is available for large orders. 2.0 5.8 2.0 12.5 5.8 Legend printing 12.9 15.0 Single Pole dimensions for snap-in fixing Panel thickness Dimension X 0.75-1.24 19.1/19.2 1.25-1.99 19.3/19.4 2.00-3.00 19.7/19.8 B (Double Pole) with terminal barrier BC (Double Pole) w/o terminal barrier Panel cut-out 21.9 Call sales for details of available voltages. 7.0 7.0 7.0 7.0 Terminals shown are “H” 4.8 push on type Terminal spacing 10.2 between pole centres For 8620 and 8670 dimensions see page 16 Blanking plate A8634FB Dummy unit to fill unused panel holes. Single pole size only. Protective covers L167 for SP L180 for DP Bezel 21.0 X Select from the examples or call sales for custom legend. Lamp voltage 12.5 7.4 21.0 X 19.8 to barrier (designed to IP65) Snap on to bodies with V rocker or F lens, this reduces maximum acceptable panel thickness to 2.2mm. Examples of printing 24.0 Double Pole dimensions for snap-in fixing Panel thickness Dimension X 0.75-1.24 19.1/19.2 1.25-1.99 19.3/19.4 2.00-3.00 19.7/19.8 Single Pole options CL076 CL080 CL141 CL142 CL059 CL058 Most switches shown can have single pole switching in double pole bodies. Cut-outs must be punched in the direction of insertion tel: +44 (0)20 8979 3232 • Arcolectric • email: info@arcoswitch.co.uk 15