2U3836E18QDBVRG4Q1

TPS3836E18-Q1 / J25-Q1 / H30-Q1 / L30-Q1 / K33-Q1 TPS3837E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1, TPS3838E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1 NANOPOWER SUPERVISORY CIRCUITS SGLS141A − DECEMBER 2002 − REVISED JANUARY 2007 D Qualified for Automotive Applications D Customer-Specific Configuration Control D D D D D D D D Can Be Supported Along With Major-Change Approval ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) Supply Current of 220 nA (Typ) Precision Supply Voltage Supervision Range: 1.8 V, 2.5 V, 3.0 V, 3.3 V Power-On Reset Generator With Selectable Delay Time of 10 ms or 200 ms Push/Pull RESET Output (TPS3836), RESET Output (TPS3837), or Open-Drain RESET Output (TPS3838) Manual Reset 5-Pin SOT-23 Package Temperature Range: −40°C to 125°C D Applications Include − Applications Using Automotive Low-Power DSPs, Microcontrollers, or Microprocessors − Battery-Powered Equipment − Intelligent Instruments − Wireless Communication Systems − Automotive Systems TPS3836, TPS3838 DBV PACKAGE (TOP VIEW) CT 1 GND 2 MR 3 5 VDD 4 RESET TPS3837 DBV PACKAGE (TOP VIEW) description The TPS3836, TPS3837, TPS3838 families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. CT 1 GND 2 MR 3 5 VDD 4 RESET During power on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET output active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after VDD has risen above the threshold voltage VIT. When CT is connected to GND a fixed delay time of typical 10 ms is asserted. When connected to VDD the delay time is typically 200 ms. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. All the devices of this family have a fixed-sense threshold voltage VIT set by an internal voltage divider. The TPS3836 has an active-low push-pull RESET output. The TPS3837 has active-high push-pull RESET, and TPS3838 integrates an active-low open-drain RESET output. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2007, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 TPS3836E18-Q1 / J25-Q1 / H30-Q1 / L30-Q1 / K33-Q1 TPS3837E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1, TPS3838E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1 NANOPOWER SUPERVISORY CIRCUITS
SGLS141A − DECEMBER 2002 − REVISED JANUARY 2007 description (continued) TPS3836K33 VDD MSP430 VCC CT Xin RESET RST MR T Xout Quartz 32 kHz VSS GND Lithium Battery 3.6 V TYPICAL OPERATING CIRCUIT The product spectrum is designed for supply voltages of 1.8 V, 2.5 V, 3 V, and 3.3 V. The circuits are available in a 5-pin SOT-23 package. The TPS3836-Q-Q1, TPS3837-Q-Q1, TPS3838-Q-Q1 families are characterized for operation over a temperature range of −40°C to 125°C. PACKAGE INFORMATION TA −40°C 125°C 40 C to 125 C † DEVICE NAME THRESHOLD VOLTAGE SYMBOL TPS3836E18QDBVRQ1† 1.71 V PDNQ TPS3836J25QDBVRQ1† 2.25 V PDSQ TPS3836H30QDBVRQ1† 2.79 V PHRQ TPS3836L30QDBVRQ1† 2.64 V PCAQ TPS3836K33QDBVRQ1† 2.93 V PDTQ TPS3837E18QDBVRQ1† 1.71 V PDOQ TPS3837J25QDBVRQ1† 2.25 V PDRQ TPS3837L30QDBVRQ1† 2.64 V PCBQ TPS3837K33QDBVRQ1† 2.93 V PDUQ TPS3838E18QDBVRQ1† 1.71 V PDQQ TPS3838J25QDBVRQ1† 2.25 V PDPQ TPS3838L30QDBVRQ1† 2.64 V PCCQ TPS3838K33QDBVRQ1† 2.93 V PDVQ DBVR indicates tape and reel of 3000 parts. ORDERING INFORMATION TPS383 6 E 18 Q DBV R Q1 Automotive Designator Reel Package Q-Temperature Designator Nominal Supply Voltage Typical Reset Threshold Voltage Functionality Family 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 
TPS3836E18-Q1 / J25-Q1 / H30-Q1 / L30-Q1 / K33-Q1 TPS3837E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1, TPS3838E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1 NANOPOWER SUPERVISORY CIRCUITS SGLS141A − DECEMBER 2002 − REVISED JANUARY 2007 FUNCTION TABLE TPS3836, TPS3837, TPS3838 † ‡ MR VDD > VIT RESET† RESET‡ L 0 L H L 1 L H H 0 L H H 1 H L TPS3836 and TPS3838 TPS3837 functional block diagram VDD CT R3 MR C1 R1 + S1 Reset Logic and Timer − Reset (TPS3837-Push-Pull) Reset (TPS3836-Push-Pull TPS3838-Open-Drain) R2 C2 S2 Band-Gap Reference S3 C3 Refresh Timer GND POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 TPS3836E18-Q1 / J25-Q1 / H30-Q1 / L30-Q1 / K33-Q1 TPS3837E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1, TPS3838E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1 NANOPOWER SUPERVISORY CIRCUITS SGLS141A − DECEMBER 2002 − REVISED JANUARY 2007 timing diagram A B C D E F G VDD VIT < 1.1 V t MR t RESET t Undefined Output 4 td POST OFFICE BOX 655303 td • DALLAS, TEXAS 75265 td Undefined Output

TPS3836E18-Q1 / J25-Q1 / H30-Q1 / L30-Q1 / K33-Q1 TPS3837E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1, TPS3838E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1 NANOPOWER SUPERVISORY CIRCUITS SGLS141A − DECEMBER 2002 − REVISED JANUARY 2007 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V All other pins (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 7 V Maximum low output current, IOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 mA Maximum high output current, IOH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −5 mA Input clamp current, IIK (VI < 0 or VI > VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA Output clamp current, IOK (VO < 0 or VO > VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 125°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C Soldering temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: All voltage values are with respect to GND. For reliable operation, the device must not be operated at 7 V for more than t=1000 h continuously DISSIPATION RATING TABLE PACKAGE TA VIT, VDD < 3 V 220 500 VDD > VIT, VDD > 3 V 250 550 10 25 −40 −60 −25 VI = 0 V to VDD −200 V mV MR (see Note 4) VDD = 6 V V 0.2 1.64 Internal pullup resistor at MR Input capacitance at MR, CT MAX TPS383xJ25 VDD < VIT CI TYP TPS383xE18 Hysteresis at VDD input High-level High level input current MIN IOH = −2 mA −100 µA 25 nA −340 µA 25 nA 25 nA nA µA 30 kΩ 5 pF NOTES: 2. The lowest voltage at which RESET output becomes active. tr, VDD ≥ 15 µs/V 3. To ensure best stability of the threshold voltage, a bypass capacitor (ceramic, 0.1 µF) should be placed near the supply terminal. 4. If manual reset is unused, MR should be connected to VDD to minimize current consumption. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 
TPS3836E18-Q1 / J25-Q1 / H30-Q1 / L30-Q1 / K33-Q1 TPS3837E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1, TPS3838E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1 NANOPOWER SUPERVISORY CIRCUITS SGLS141A − DECEMBER 2002 − REVISED JANUARY 2007 timing requirements at RL = 1 MΩ, CL = 50 pF, TA = 25_C PARAMETER tw Pulse width TEST CONDITIONS MIN TYP MAX UNIT at VDD VIH = VIT + 0.2 V, VIL = VIT − 0.2 V 6 µs at MR VDD ≥ VIT + 0.2 V, VIH = 0.7 × VDD VIL = 0.3 × VDD, 1 µs switching characteristics at RL = 1 MΩ, CL = 50 pF, TA = 25_C PARAMETER TEST CONDITIONS VDD ≥ VIT + 0.2 V, MR = 0.7 × VDD, CT = GND, See timing diagram td tPHL tPLH Delay time VDD ≥ VIT + 0.2 V, MR = 0.7 × VDD, CT = VDD , See timing diagram Propagation (delay) time, high high-to-low-level to low level output Propagation (delay) time, low to high level output low-to-high-level VDD to RESET delay (TPS3836 TPS3838) (TPS3836, VDD to RESET delay (TPS3837) MIN 5 TYP MAX 10 UNIT 15 ms 100 200 300 VIL = VIT − 0.2 V, VIH = VIT + 0.2 V 10 VIL = 1.6 V 50 VIL = VIT − 0.2 V, VIH = VIT + 0.2 V 10 VIL = 1.6 V 50 0.1 µs 0.1 µs tPHL Propagation (delay) time, high-to-low-level output MR to RESET delay (TPS3836, TPS3838) VDD ≥ VIT + 0.2 V, tPLH Propagation (delay) time, low-to-high-level output MR to RESET delay (TPS3837) VIL = 0.7 × VDD VIL = 0.3 × VDD, µs µs TYPICAL CHARACTERISTICS Table of Graphs FIGURE IDD Supply current vs Supply voltage 1 IMR Manual reset current vs Manual reset voltage 2 VOL Low-level output voltage vs Low-level output current 3 VOH High-level output voltage vs High-level output current 4 Normalized reset threshold voltage vs Free-air temperature 5 Minimum pulse duration at VDD vs VDD Threshold overdrive 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 TPS3836E18-Q1 / J25-Q1 / H30-Q1 / L30-Q1 / K33-Q1 TPS3837E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1, TPS3838E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1 NANOPOWER SUPERVISORY CIRCUITS
SGLS141A − DECEMBER 2002 − REVISED JANUARY 2007 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs SUPPLY VOLTAGE MANUAL RESET CURRENT vs MANUAL RESET VOLTAGE 10 100 MR = Open CT = GND VDD = 6 V CT = GND IMR − Manual Reset Current − µA TA = 85°C IDD − Supply Current − µA 8 TA = 25°C 6 TA = 0°C 4 TA = −40°C 2 0 0 2 4 0 TA = −40°C −100 TA = 0°C −200 TA = 25°C −300 TA = 85°C −400 −500 −2 6 0 VDD − Supply Voltage − V Figure 1 6 HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 2.0 2.0 VDD = 2 V MR = OPEN CT = GND VOH − High-Level Output Voltage − V VOL − Low-Level Output Voltage − V 4 Figure 2 LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 1.5 TA = 25°C 1.0 TA = 85°C TA = 0°C 0.5 TA = −40°C 0.0 VDD = 2 V MR = OPEN CT = GND 1.5 TA = 85°C TA = 25°C 1.0 TA = 0°C 0.5 TA = −40°C 0.0 0 1 2 3 4 5 6 7 IOL − Low-Level Output Current − mA Figure 3 8 2 VMR − Manual Reset Voltage − V POST OFFICE BOX 655303 0 1 2 3 4 IOH − High-Level Output Current − mA Figure 4 • DALLAS, TEXAS 75265 5 TPS3836E18-Q1 / J25-Q1 / H30-Q1 / L30-Q1 / K33-Q1 TPS3837E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1, TPS3838E18-Q1 / J25-Q1 / L30-Q1 / K33-Q1 NANOPOWER SUPERVISORY CIRCUITS SGLS141A − DECEMBER 2002 − REVISED JANUARY 2007 TYPICAL CHARACTERISTICS NORMALIZED RESET THRESHOLD VOLTAGE vs FREE-AIR TEMPERATURE Normalized Reset Threshold Voltage − V 1.001 1 0.999 0.998 0.997 CT = GND, MR = Open 0.996 0.995 −40 −15 10 35 60 TA − Free-Air Temperature − °C 85 Figure 5 MINIMUM PULSE DURATION AT VDD vs VDD THRESHOLD OVERDRIVE 22 MR = Open CT = GND TA = 25°C 20 Minimum Pulse Duration at VDD − µs
18 16 14 12 10 8 6 4 2 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 VDD − Threshold Overdrive − V Figure 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 PACKAGE OPTION ADDENDUM www.ti.com 22-Dec-2016 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) 2U3836E18QDBVRG4Q1 NRND SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDNQ 2U3836H30QDBVRG4Q1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PHRQ 2U3836J25QDBVRG4Q1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDSQ 2U3836K33QDBVRG4Q1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDTQ 2U3836L30QDBVRG4Q1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PCAQ 2U3837L30QDBVRG4Q1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PCBQ 2U3838E18QDBVRG4Q1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDQQ 2U3838J25QDBVRG4Q1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDPQ 2U3838K33QDBVRG4Q1 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDVQ 2U3838L30QDBVRG4Q1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PCCQ TPS3836E18QDBVRQ1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDNQ TPS3836H30QDBVRQ1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PHRQ TPS3836J25QDBVRQ1 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDSQ TPS3836K33QDBVRQ1 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDTQ TPS3836L30QDBVRQ1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PCAQ TPS3837E18QDBVRQ1 OBSOLETE SOT-23 DBV 5 TBD Call TI Call TI -40 to 125 TPS3837J25QDBVRQ1 OBSOLETE SOT-23 DBV 5 TBD Call TI Call TI -40 to 125 TPS3837K33QDBVRQ1 OBSOLETE SOT-23 DBV 5 TBD Call TI Call TI -40 to 125 Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 22-Dec-2016 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) TPS3837L30QDBVRQ1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PCBQ TPS3838E18QDBVRQ1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDQQ TPS3838J25QDBVRQ1 LIFEBUY SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDPQ TPS3838K33QDBVRQ1 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PDVQ TPS3838L30QDBVRQ1 NRND SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 PCCQ (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com 22-Dec-2016 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TPS3836-Q1, TPS3836E18-Q1, TPS3836H30-Q1, TPS3836J25-Q1, TPS3836K33-Q1, TPS3836L30-Q1, TPS3837E18-Q1, TPS3837J25-Q1, TPS3837K33-Q1, TPS3837L30-Q1, TPS3838-Q1, TPS3838E18-Q1, TPS3838J25-Q1, TPS3838K33-Q1, TPS3838L30-Q1 : • Catalog: TPS3836, TPS3836E18, TPS3836H30, TPS3836J25, TPS3836K33, TPS3836L30, TPS3837E18, TPS3837J25, TPS3837K33, TPS3837L30, TPS3838, TPS3838E18, TPS3838J25, TPS3838K33, TPS3838L30 • Enhanced Product: TPS3836-EP, TPS3836J25-EP, TPS3837K33-EP NOTE: Qualified Version Definitions: • Catalog - TI's standard catalog product • Enhanced Product - Supports Defense, Aerospace and Medical Applications Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 22-Dec-2016 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 2U3836E18QDBVRG4Q1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 2U3836H30QDBVRG4Q1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 2U3836J25QDBVRG4Q1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 2U3836K33QDBVRG4Q1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 2U3836L30QDBVRG4Q1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 2U3837L30QDBVRG4Q1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 2U3838E18QDBVRG4Q1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 2U3838J25QDBVRG4Q1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 2U3838K33QDBVRG4Q1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 2U3838L30QDBVRG4Q1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3836E18QDBVRQ1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3836H30QDBVRQ1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3836J25QDBVRQ1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3836K33QDBVRQ1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3836L30QDBVRQ1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3837L30QDBVRQ1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3838E18QDBVRQ1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS3838J25QDBVRQ1 SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 22-Dec-2016 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) TPS3838K33QDBVRQ1 SOT-23 DBV 5 3000 180.0 9.0 TPS3838L30QDBVRQ1 SOT-23 DBV 5 3000 180.0 9.0 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.15 3.2 1.4 4.0 8.0 Q3 3.15 3.2 1.4 4.0 8.0 Q3 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) 2U3836E18QDBVRG4Q1 SOT-23 DBV 5 3000 182.0 182.0 20.0 2U3836H30QDBVRG4Q1 SOT-23 DBV 5 3000 182.0 182.0 20.0 2U3836J25QDBVRG4Q1 SOT-23 DBV 5 3000 182.0 182.0 20.0 2U3836K33QDBVRG4Q1 SOT-23 DBV 5 3000 182.0 182.0 20.0 2U3836L30QDBVRG4Q1 SOT-23 DBV 5 3000 182.0 182.0 20.0 2U3837L30QDBVRG4Q1 SOT-23 DBV 5 3000 182.0 182.0 20.0 2U3838E18QDBVRG4Q1 SOT-23 DBV 5 3000 182.0 182.0 20.0 2U3838J25QDBVRG4Q1 SOT-23 DBV 5 3000 182.0 182.0 20.0 2U3838K33QDBVRG4Q1 SOT-23 DBV 5 3000 182.0 182.0 20.0 2U3838L30QDBVRG4Q1 SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3836E18QDBVRQ1 SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3836H30QDBVRQ1 SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3836J25QDBVRQ1 SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3836K33QDBVRQ1 SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3836L30QDBVRQ1 SOT-23 DBV 5 3000 182.0 182.0 20.0 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 22-Dec-2016 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS3837L30QDBVRQ1 SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3838E18QDBVRQ1 SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3838J25QDBVRQ1 SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3838K33QDBVRQ1 SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS3838L30QDBVRQ1 SOT-23 DBV 5 3000 182.0 182.0 20.0 Pack Materials-Page 3 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2016, Texas Instruments Incorporated