SCDS158A − OCTOBER 2003 − REVISED DECEMBER 2004
D Output Voltage Translation Tracks VCC
D Supports Mixed-Mode Signal Operation On
D
D
D
D
D
D
D VCC Operating Range From 2.3 V to 3.6 V
D Data I/Os Support 0- to 5-V Signaling
All Data I/O Ports
− 5-V Input Down To 3.3-V Output Level
Shift With 3.3-V VCC
− 5-V/3.3-V Input Down To 2.5-V Output
Level Shift With 2.5-V VCC
5-V-Tolerant I/Os With Device Powered Up
or Powered Down
Bidirectional Data Flow, With Near-Zero
Propagation Delay
Low ON-State Resistance (ron)
Characteristics (ron = 5 Ω Typical)
Low Input/Output Capacitance Minimizes
Loading (Cio(OFF) = 8 pF Typical)
Data and Control Inputs Provide
Undershoot Clamp Diodes
Low Power Consumption
(ICC = 20 µA Max)
D
D
D
D
D
D
Levels (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V,
5 V)
Control Inputs Can Be Driven by TTL or
5-V/3.3-V CMOS Outputs
Ioff Supports Partial-Power-Down Mode
Operation
Latch-Up Performance Exceeds 250 mA Per
JESD 17
ESD Performance Tested Per JESD 22
− 2000-V Human-Body Model
(A114-B, Class II)
− 1000-V Charged-Device Model (C101)
Supports Digital Applications: Level
Translation, Memory Interleaving, Bus
Isolation
Ideal for Low-Power Portable Equipment
DBQ, DGV, DW, OR PW PACKAGE
(TOP VIEW)
BE
1B1
1A1
1A2
1B2
2B1
2A1
2A2
2B2
3B1
3A1
GND
1
24
2
23
3
22
4
21
5
20
6
19
7
18
8
17
9
16
10
15
11
14
12
13
VCC
5B2
5A2
5A1
5B1
4B2
4A2
4A1
4B1
3B2
3A2
BX
description/ordering information
ORDERING INFORMATION
SOIC − DW
−40°C to 85°C
ORDERABLE
PART NUMBER
PACKAGE†
TA
SSOP (QSOP) − DBQ
TSSOP − PW
Tube
SN74CB3T3383DW
Tape and reel
SN74CB3T3383DWR
Tape and reel
SN74CB3T3383DBQR
Tube
SN74CB3T3383PW
Tape and reel
SN74CB3T3383PWR
TOP-SIDE
MARKING
CB3T3383
CB3T3383
KS383
TVSOP − DGV
Tape and reel
SN74CB3T3383DGVR
KS383
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2004, Texas Instruments Incorporated
!"#$%&'(!$" !) *+%%,"( ') $# -+./!*'(!$" 0'(,
%$0+*() *$"#$%& ($ )-,*!#!*'(!$") -,% (1, (,%&) $# ,2')
")(%+&,"()
)('"0'%0 3'%%'"(4 %$0+*(!$" -%$*,))!"5 0$,) "$( ",*,))'%!/4 !"*/+0,
(,)(!"5 $# '// -'%'&,(,%)
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SCDS158A − OCTOBER 2003 − REVISED DECEMBER 2004
description/ordering information (continued)
The SN74CB3T3383 is a high-speed TTL-compatible FET bus-exchange switch with low ON-state resistance
(ron), allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data
I/O ports by providing voltage translation that tracks VCC. The SN74CB3T3383 supports systems using 5-V
TTL, 3.3-V LVTTL, and 2.5-V CMOS switching standards, as well as user-defined switching levels
(see Figure 1).
VCC
5.5 V
VCC
IN
≈VCC − 1 V
≈VCC
OUT
≈VCC − 1 V
CB3T
0V
0V
Input Voltages
Output Voltages
NOTE A: If the input high voltage (VIH) level is greater than or equal to VCC − 1 V, and less than or equal to 5.5 V, then the output high
voltage (VOH) level will be equal to approximately the VCC voltage level.
Figure 1. Typical DC Voltage Translation Characteristics
The SN74CB3T3383 is organized as a 10-bit bus switch or as a 5-bit bus-exchange with enable (BE) input.
When used as a 5-bit bus-exchange, the device provides data exchanging between four signal ports. When BE
is low, the bus-exchange switch is ON, and the select input (BX) controls the data path. When BE is high, the
bus-exchange switch is OFF, and a high-impedance state exists between the A and B ports.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that
damaging current will not backflow through the device when it is powered down. The device has isolation during
power off.
To ensure the high-impedance state during power up or power down, BE should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SCDS158A − OCTOBER 2003 − REVISED DECEMBER 2004
FUNCTION TABLE
(each 5-bit switch)
INPUTS
INPUTS/OUTPUTS
FUNCTION
BE
BX
A1
A2
L
L
B1
B2
A1 port = B1 port
A2 port = B2 port
L
H
B2
B1
A1 port = B2 port
A2 port = B1 port
H
X
Z
Z
Disconnect
logic diagram (positive logic)
2
3
1A1
1B1
SW
SW
SW
5
4
1A2
1B2
SW
20
21
5A1
5B1
SW
SW
SW
23
22
5A2
5B2
SW
1
BE
13
BX
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SCDS158A − OCTOBER 2003 − REVISED DECEMBER 2004
simplified schematic, each FET switch (SW)
A
B
VG†
Control
Circuit
EN‡
† Gate Voltage (VG) is approximately equal to VCC + VT when the switch is ON and VI > VCC + VT.
‡ EN is the internal enable signal applied to the switch.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)§
Supply voltage range, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Control input voltage range, VIN (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Switch I/O voltage range, VI/O (see Notes 1, 2, and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Control input clamp current, IIK (VIN < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −50 mA
I/O port clamp current, II/OK (VI/O < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −50 mA
ON-state switch current, II/O (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±128 mA
Continuous current through VCC or GND terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±100 mA
Package thermal impedance, θJA (see Note 5): DBQ package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61°C/W
DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
§ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltages are with respect to ground unless otherwise specified.
2. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
3. VI and VO are used to denote specific conditions for VI/O.
4. II and IO are used to denote specific conditions for II/O.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 6)
VCC
Supply voltage
VIH
High-level control input voltage
VIL
Low-level control input voltage
VI/O
TA
Data input/output voltage
MIN
MAX
2.3
3.6
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
VCC = 2.3 V to 2.7 V
1.7
5.5
2
5.5
0
0.7
VCC = 2.7 V to 3.6 V
0
0.8
0
5.5
V
−40
85
°C
Operating free-air temperature
UNIT
V
V
V
NOTE 6: All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SCDS158A − OCTOBER 2003 − REVISED DECEMBER 2004
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
VIK
VCC = 3 V,
II = −18 mA
VOH
See Figures 3 and 4
IIN‡
Control inputs
IOZ§
VCC = 3.6 V,
VO = 0 to 5.5 V,
VI = 0,
Switch OFF,
VIN = VCC or GND
Ioff
VCC = 0,
VO = 0 to 5.5 V,
VI = 0,
ICC
∆ICC¶
Control inputs
Cin
Control inputs
TYP†
VCC = 3.6 V,
VIN‡ = 3.6 V to 5.5 V or GND
VCC = 3.6 V,
Switch ON,
VIN = VCC or GND
II
MIN
VCC = 3.6 V,
II/O = 0,
Switch ON or OFF,
VIN = VCC or GND
VCC = 3 V to 3.6 V,
One input at VCC − 0.6 V,
Other inputs at VCC or GND
MAX
UNIT
−1.2
V
±10
µA
±20
VI = VCC − 0.7 V to 5.5 V
VI = 0.7 V to VCC − 0.7 V
−40
µA
±5
VI = 0 to 0.7 V
±10
µA
10
µA
VI = VCC or GND
20
VI = 5.5 V
20
A
µA
300
µA
VCC = 3.3 V,
VIN = VCC or GND
4
pF
Cio(OFF)
VCC = 3.3 V,
VI/O = 5.5 V, 3.3 V, or GND,
Switch OFF,
VIN = VCC or GND
8
pF
VCC = 3.3 V,
Switch ON,
VIN = VCC or GND
VI/O = 5.5 V or 3.3 V
Cio(ON)
VI/O = GND
21
VCC = 2.3 V,
TYP at VCC = 2.5 V,
VI = 0
IO = 24 mA
5
9
IO = 16 mA
5
9
VCC = 3 V,
VI = 0
IO = 64 mA
IO = 32 mA
5
8
ron#
7
pF
Ω
5
8
† All typical values are at VCC = 3.3 V (unless otherwise noted), TA = 25°C.
‡ VIN and IIN refer to control inputs. VI, VO, II, and IO refer to data pins.
§ For I/O ports, the parameter IOZ includes the input leakage current.
¶ This is the increase in supply current for each input that is at the specified TTL voltage level, rather than VCC or GND.
# Measured by the voltage drop between A and B terminals at the indicated current through the switch. ON-state resistance is determined by the
lower of the voltages of the two (A or B) terminals.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
SCDS158A − OCTOBER 2003 − REVISED DECEMBER 2004
switching characteristics over recommended operating free-air temperature range (unless
otherwise noted) (see Figure 2)
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
FROM
(INPUT)
TO
(OUTPUT)
A or B
B or A
tpd(s)
ten
BX
A or B
1
15
1
BE
A or B
1
13.5
1
9
ns
tdis
BE
A or B
1
7
1
8.5
ns
PARAMETER
tpd†
MIN
MAX
MIN
0.15
UNIT
MAX
0.25
10
ns
† The propagation delay is the calculated RC time constant of the typical ON-state resistance of the switch and the specified load capacitance,
when driven by an ideal voltage source (zero output impedance).
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SCDS158A − OCTOBER 2003 − REVISED DECEMBER 2004
PARAMETER MEASUREMENT INFORMATION
VCC
Input Generator
VIN
50 Ω
50 Ω
VG1
TEST CIRCUIT
DUT
Input Generator
VI
S1
RL
VO
50 Ω
VG2
CL
(see Note A)
RL
TEST
VCC
S1
RL
VI
CL
tpd(s)
2.5 V ± 0.2 V
3.3 V ± 0.3 V
Open
Open
500 Ω
500 Ω
3.6 V or GND
5.5 V or GND
30 pF
50 pF
tPLZ/tPZL
2.5 V ± 0.2 V
3.3 V ± 0.3 V
2 × VCC
2 × VCC
500 Ω
500 Ω
GND
GND
30 pF
50 pF
0.15 V
0.3 V
tPHZ/tPZH
2.5 V ± 0.2 V
3.3 V ± 0.3 V
Open
Open
500 Ω
500 Ω
3.6 V
5.5 V
30 pF
50 pF
0.15 V
0.3 V
Output
Control
(VIN)
V∆
VCC
VCC/2
VCC
VCC/2
0V
tPLH
VOH
Output
VCC/2
Output
Waveform 1
S1 at 2 × VCC
(see Note B)
tPLZ
VCC
VCC/2
tPZH
tPHL
VCC/2
VOL
VCC/2
0V
tPZL
VCC/2
Open
GND
50 Ω
Output
Control
(VIN)
2 × VCC
Output
Waveform 2
S1 at Open
(see Note B)
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES (tpd(s))
VOL + V∆
VOL
tPHZ
VCC/2
VOH − V∆
VOH
0V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf ≤ 2.5 ns.
D. The outputs are measured one at a time, with one transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. tPLH and tPHL are the same as tpd(s). The tpd propagation delay is the calculated RC time constant of the typical ON-state resistance
of the switch and the specified load capacitance, when driven by an ideal voltage source (zero output impedance).
H. All parameters and waveforms are not applicable to all devices.
Figure 2. Test Circuit and Voltage Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
SCDS158A − OCTOBER 2003 − REVISED DECEMBER 2004
TYPICAL CHARACTERISTICS
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
4.0
VCC = 2.3 V
IO = 1 µA
TA = 25°C
3.0
V − Output Voltage − V
O
V − Output Voltage − V
O
4.0
2.0
1.0
0.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
VCC = 3 V
IO = 1 µA
TA = 25°C
3.0
2.0
1.0
0.0
0.0
1.0
VI − Input Voltage − V
2.0
POST OFFICE BOX 655303
4.0
VI − Input Voltage − V
Figure 3. Data Output Voltage vs Data Input Voltage
8
3.0
• DALLAS, TEXAS 75265
5.0
6.0
SCDS158A − OCTOBER 2003 − REVISED DECEMBER 2004
TYPICAL CHARACTERISTICS (continued)
OUTPUT VOLTAGE HIGH
vs
SUPPLY VOLTAGE
OUTPUT VOLTAGE HIGH
vs
SUPPLY VOLTAGE
4.0
100 µA
8 mA
16 mA
24 mA
3.0
2.5
2.0
1.5
2.3
2.5
2.7
2.9
3.1
3.3
3.5
V
− Output Voltage High − V
OH
3.5
VCC = 2.3 V to 3.6 V
VI = 5.5 V
TA = 85°C
VCC = 2.3 V to 3.6 V
VI = 5.5 V
TA = 25°C
3.5
100 µA
8 mA
16 mA
24 mA
3.0
2.5
2.0
1.5
3.7
2.3
2.5
VCC − Supply Voltage − V
2.7
2.9
3.1
3.3
3.5
3.7
VCC − Supply Voltage − V
OUTPUT VOLTAGE HIGH
vs
SUPPLY VOLTAGE
4.0
V
− Output Voltage High − V
OH
V
− Output Voltage High − V
OH
4.0
3.5
VCC = 2.3 V to 3.6 V
VI = 5.5 V
TA = –40°C
100 µA
8 mA
16 mA
24 mA
3.0
2.5
2.0
1.5
2.3
2.5
2.7
2.9
3.1
3.3
3.5
3.7
VCC − Supply Voltage − V
Figure 4. VOH Values
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
PACKAGE OPTION ADDENDUM
www.ti.com
13-Oct-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
(1)
74CB3T3383DBQRE4
ACTIVE
74CB3T3383DBQRG4
74CB3T3383DGVRE4
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
SSOP
DBQ
24
TBD
OBSOLETE
SSOP
DBQ
24
TBD
ACTIVE
TVSOP
DGV
24
2000
Green (RoHS
& no Sb/Br)
74CB3T3383DGVRG4
ACTIVE
TVSOP
DGV
24
2000
Green (RoHS
& no Sb/Br)
SN74CB3T3383DGVR
ACTIVE
TVSOP
DGV
24
2000
SN74CB3T3383DW
ACTIVE
SOIC
DW
24
SN74CB3T3383DWE4
ACTIVE
SOIC
DW
SN74CB3T3383DWG4
ACTIVE
SOIC
SN74CB3T3383DWR
ACTIVE
SN74CB3T3383DWRE4
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Call TI
(4/5)
Call TI
-40 to 85
Call TI
Call TI
-40 to 85
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
KS383
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
KS383
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
KS383
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB3T3383
24
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB3T3383
DW
24
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB3T3383
SOIC
DW
24
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB3T3383
ACTIVE
SOIC
DW
24
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB3T3383
SN74CB3T3383DWRG4
ACTIVE
SOIC
DW
24
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB3T3383
SN74CB3T3383PW
ACTIVE
TSSOP
PW
24
60
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
KS383
SN74CB3T3383PWE4
ACTIVE
TSSOP
PW
24
60
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
KS383
SN74CB3T3383PWG4
ACTIVE
TSSOP
PW
24
60
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
KS383
SN74CB3T3383PWR
ACTIVE
TSSOP
PW
24
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
KS383
SN74CB3T3383PWRE4
ACTIVE
TSSOP
PW
24
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
KS383
SN74CB3T3383PWRG4
ACTIVE
TSSOP
PW
24
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
KS383
The marketing status values are defined as follows:
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
13-Oct-2013
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
12-Aug-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
SN74CB3T3383DGVR
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
TVSOP
DGV
24
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
SN74CB3T3383DWR
SOIC
DW
24
2000
330.0
24.4
10.75
15.7
2.7
12.0
24.0
Q1
SN74CB3T3383PWR
TSSOP
PW
24
2000
330.0
16.4
6.95
8.3
1.6
8.0
16.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
12-Aug-2013
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
SN74CB3T3383DGVR
TVSOP
DGV
24
2000
367.0
367.0
35.0
SN74CB3T3383DWR
SOIC
DW
24
2000
367.0
367.0
45.0
SN74CB3T3383PWR
TSSOP
PW
24
2000
367.0
367.0
38.0
Pack Materials-Page 2
MECHANICAL DATA
MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000
DGV (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
24 PINS SHOWN
0,40
0,23
0,13
24
13
0,07 M
0,16 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
0°–8°
1
0,75
0,50
12
A
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,08
14
16
20
24
38
48
56
A MAX
3,70
3,70
5,10
5,10
7,90
9,80
11,40
A MIN
3,50
3,50
4,90
4,90
7,70
9,60
11,20
DIM
4073251/E 08/00
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.
Falls within JEDEC: 24/48 Pins – MO-153
14/16/20/56 Pins – MO-194
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated