5
D
4
3
2
1
FMC Connector to Logic Analyzer Adaptor
Board for ADC12D1x00RFRB
D
Bench Evaluation Board
SPECIAL NOTES
C
C
These schematics reflect the current state of product development. This design
had NOT yet been fully tested at the time these schematics were generated.
Since this product is in development, the user of this document is
strongly advised to check for the latest revision.
National Semiconductor reserves the right to make changes to this product.
ALL parts labeled "NA" are NOT ASSEMBLED.
Print Instructions:
- To create a readable printout, we recommend to use A3 or 11x17" paper size.
- When printing from this PDF file, make sure to check the "Shrink to fit" box.
B
B
NATIONAL SEMICONDUCTOR CORPORATION
2900 Semiconductor Dr.
Santa Clara, CA 95051
USA
(408) 721-5000
www.national.com
A
PROJECT
NAME:
PAGE TITLE
FMC Connector to Logic Analyzer Adaptor
DESIGNED:
DATE:
DRAWN:
DATE:
CHECKED:
DATE:
Title Page
THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO NATIONAL
SCHEMATIC REV:
SEMICONDUCTOR CORPORATION. USE OR DISCLOSURE WITHOUT
WRITTEN PERMISSION IS EXPRESSLY FORBIDDEN. COPYRIGHT 2007.
LAST MODIFIED: Wednesday, June 15, 2011
5
4
3
2
DOC # : ____________
1
Sheet
1 OF 4
0.92
A
LAST MODIFIED: Thursday, June 16, 2011
DOC # : ____________
Sheet
0.92
2 OF 4
FMC_DID+5
FMC_DID-5
FMC_DID+9
FMC_DID-9
FMC_RCOUT1+
FMC_RCOUT1FMC_DI+0
FMC_DI-0
FMC_DI+9
FMC_DI-9
CALRUN
HEADER 2
1
2
ASP-134486-01
FMCC
FMC_DQD+0
FMC_DQD-0
FMC_DQD+4
FMC_DQD-4
C
FMC_DQD+8
FMC_DQD-8
FMC_DQ+2
FMC_DQ-2
FMC_DQ+4
FMC_DQ-4
FMC_DQ+8
FMC_DQ-8
FMC_ORQ+
FMC_ORQ-
E1
E2
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
E13
E14
E15
E16
E17
E18
E19
E20
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
E33
E34
E35
E36
E37
E38
E39
E40
FMC_PG_C2M
FMC_PG_C2M
FMC_DID+0
FMC_DID-0
GND1
FMC_DID+4
FMC_DID-4
GND2
D
FMC_DID+8
FMC_DID-8
FMC_DCLK_DI+
FMC_DCLK_DI-
BOARD MOUNTING HOLES
FMC_DI+5
FMC_DI-5
FMC_DI+8
FMC_DI-8
MT1
MT2
MT3
MT4
HOLES FOR FMC CONNECTOR
FMC1
FMC2
1
DATE:
THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO NATIONAL
SCHEMATIC REV:
SEMICONDUCTOR CORPORATION. USE OR DISCLOSURE WITHOUT
WRITTEN PERMISSION IS EXPRESSLY FORBIDDEN. COPYRIGHT 2007.
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
D12
D13
D14
D15
D16
D17
D18
D19
D20
D21
D22
D23
D24
D25
D26
D27
D28
D29
D30
D31
D32
D33
D34
D35
D36
D37
D38
D39
D40
1
CHECKED:
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
C14
C15
C16
C17
C18
C19
C20
C21
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
B24
B25
B26
B27
B28
B29
B30
B31
B32
B33
B34
B35
B36
B37
B38
B39
B40
1
DATE:
DATE:
FMCB
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
A27
A28
A29
A30
A31
A32
A33
A34
A35
A36
A37
A38
A39
A40
1
DESIGNED:
DRAWN:
FMC Connector
FMCA
1
1
D
PAGE TITLE
FMC Connector to Logic Analyzer Adaptor
2
1
PROJECT
NAME:
3
1
4
NATIONAL SEMICONDUCTOR CORPORATION
2900 Semiconductor Dr.
Santa Clara, CA 95051
USA
(408) 721-5000
www.national.com
1
5
ASP-134486-01
FMCE
FMC_PG_M2C
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
F14
F15
F16
F17
F18
F19
F20
F21
F22
F23
F24
F25
F26
F27
F28
F29
F30
F31
F32
F33
F34
F35
F36
F37
F38
F39
F40
FMCD
FMC_DCLK_DQD+
FMC_DCLK_DQDFMC_DQD+3
FMC_DQD-3
FMC_DCLK_DLD+
FMC_DCLK_DLD-
FMC_DQD+7
FMC_DQD-7
FMC_DID+2
FMC_DID-2
FMC_DQD+11
FMC_DQD-11
FMC_DID+7
FMC_DID-7
FMC_DID+11
FMC_DID-11
FMC_CALRUN
FMC_DQ+1
FMC_DQ-1
FMC_DI+2
FMC_DI-2
FMC_DQ+3
FMC_DQ-3
FMC_DI+4
FMC_DI-4
FMC_DQ+7
FMC_DQ-7
FMC_DI+7
FMC_DI-7
FMC_DQ+11
FMC_DQ-11
FMC_DI+11
FMC_DI-11
ASP-134486-01
G1
G2
G3
G4
G5
G6
G7
G8
G9
G10
G11
G12
G13
G14
G15
G16
G17
G18
G19
G20
G21
G22
G23
G24
G25
G26
G27
G28
G29
G30
G31
G32
G33
G34
G35
G36
G37
G38
G39
G40
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
H11
H12
H13
H14
H15
H16
H17
H18
H19
H20
H21
H22
H23
H24
H25
H26
H27
H28
H29
H30
H31
H32
H33
H34
H35
H36
H37
H38
H39
H40
FMC_DQD+2
FMC_DQD-2
FMC_DID+1
FMC_DID-1
FMC_DQD+6
FMC_DQD-6
FMC_DID+3
FMC_DID-3
FMC_DQD+10
FMC_DQD-10
FMC_DID+6
FMC_DID-6
FMC_DID+10
FMC_DID-10
FMC_RCOUT2+
FMC_RCOUT2FMC_DI+1
FMC_DI-1
FMC_DQ+0
FMC_DQ-0
FMC_DI+3
FMC_DI-3
FMC_DQ+6
FMC_DQ-6
FMC_DI+6
FMC_DI-6
FMC_DQ+10
FMC_DQ-10
FMC_DI+10
FMC_DI-10
FMC_ORI+
FMC_ORI-
J1
J2
J3
J4
J5
J6
J7
J8
J9
J10
J11
J12
J13
J14
J15
J16
J17
J18
J19
J20
J21
J22
J23
J24
J25
J26
J27
J28
J29
J30
J31
J32
J33
J34
J35
J36
J37
J38
J39
J40
K1
K2
K3
K4
K5
K6
K7
K8
K9
K10
K11
K12
K13
K14
K15
K16
K17
K18
K19
K20
K21
K22
K23
K24
K25
K26
K27
K28
K29
K30
K31
K32
K33
K34
K35
K36
K37
K38
K39
K40
C
FMC_DQD+1
FMC_DQD-1
FMC_DQD+5
FMC_DQD-5
FMC_DQD+9
FMC_DQD-9
FMC_DCLK_DQ+
FMC_DCLK_DQFMC_DQ+5
FMC_DQ-5
FMC_DQ+9
FMC_DQ-9
ASP-134486-01
ASP-134486-01
B
B
FMC_ORQFMC_ORQ+
FMC_DCLK_DQDFMC_DCLK_DQD+
FMC_PG_M2C
FMC_RCOUT1FMC_RCOUT1+
FMC_DCLK_DIDFMC_DCLK_DID+
FMC_ORIFMC_ORI+
FMC_RCOUT2FMC_RCOUT2+
FMC_DCLK_DIFMC_DCLK_DI+
FMC_DCLK_DQFMC_DCLK_DQ+
A
FMC_DI-[11..0]
FMC_DI+[11..0]
FMC_DID-[11..0]
FMC_DID+[11..0]
FMC_DQ-[11..0]
FMC_DQ+[11..0]
FMC_DQD-[11..0]
FMC_DQD+[11..0]
5
4
3
2
1
A
5
4
3
2
1
FMC_DID-[11..0]
FMC_DID+[11..0]
DID
D
FMC_DID-0
FMC_DID-1
FMC_DID-2
FMC_DID-3
FMC_DID-4
FMC_DID-5
FMC_DID-6
FMC_DID-7
FMC_DID-8
FMC_DID-9
FMC_DID-10
FMC_DID-11
C
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND1
3
GND5
D0(-)
GND9
D1(-)
GND13
D2(-)
GND17
D3(-)
GND21
D4(-)
GND25
D5(-)
GND29
D6(-)
GND33
D7(-)
GND37
D8(-)
GND41
D9(-)
GND45
D10(-)
GND49
D11(-)
GND53
D12(-)
GND57
D13(-)
GND61
D14(-)
GND65
D15(-)
GND69
71
GND73
75
GND77
79
GND81
83
GND85
87
GND89
91
GND93
GND95
97
99
D
GND2
4
GND6
D0(+)
GND10
D1(+)
GND14
D2(+)
GND18
D3(+)
GND22
D4(+)
GND26
D5(+)
GND30
D6(+)
GND34
D7(+)
GND38
D8(+)
GND42
D9(+)
GND46
D10(+)
GND50
D11(+)
GND54
D12(+)
GND58
D13(+)
GND62
D14(+)
GND66
D15(+)
GND70
72
GND74
76
GND78
CK+
GND80
84
GND86
GND88
GND90
92
GND94
GND96
98
100
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
FMC_DID+0
FMC_DID-0
RDID0
100
FMC_DID+1
FMC_DID-1
RDID1
100
FMC_DID+0
FMC_DID+1
FMC_DID+2
FMC_DID-2
RDID2
100
FMC_DID+2
FMC_DID+3
FMC_DID-3
RDID3
100
FMC_DID+3
FMC_DID+4
FMC_DID-4
RDID4
100
FMC_DID+4
FMC_DID+5
FMC_DID-5
RDID5
100
FMC_DID+5
FMC_DID+6
FMC_DID-6
RDID6
100
FMC_DID+6
FMC_DID+7
FMC_DID-7
RDID7
100
FMC_DID+7
FMC_DID+8
FMC_DID-8
RDID8
100
FMC_DID+8
FMC_DID+9
FMC_DID-9
RDID9
100
FMC_DID+9
FMC_DID+10
FMC_DID-10
RDID10
100
FMC_DID+10
FMC_DID+11
FMC_DID-11
RDID11
100
FMC_DID+11
C
Samtec ASP-65067-01
FMC_DCLK_DID+
FMC_DCLK_DID-
RDCLKID
100
FMC_RCOUT1+
FMC_RCOUT1-
RCOUT1
100
FMC_DI-[11..0]
FMC_DI+[11..0]
DI
FMC_DI-0
FMC_DI-1
FMC_DI-2
B
FMC_DI-3
FMC_DI-4
FMC_DI-5
FMC_DI-6
FMC_DI-7
FMC_DI-8
FMC_DI-9
FMC_DI-10
FMC_DI-11
A
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND1
3
GND5
D0(-)
GND9
D1(-)
GND13
D2(-)
GND17
D3(-)
GND21
D4(-)
GND25
D5(-)
GND29
D6(-)
GND33
D7(-)
GND37
D8(-)
GND41
D9(-)
GND45
D10(-)
GND49
D11(-)
GND53
D12(-)
GND57
D13(-)
GND61
D14(-)
GND65
D15(-)
GND69
71
GND73
75
GND77
79
GND81
83
GND85
87
GND89
91
GND93
GND95
97
99
GND2
4
GND6
D0(+)
GND10
D1(+)
GND14
D2(+)
GND18
D3(+)
GND22
D4(+)
GND26
D5(+)
GND30
D6(+)
GND34
D7(+)
GND38
D8(+)
GND42
D9(+)
GND46
D10(+)
GND50
D11(+)
GND54
D12(+)
GND58
D13(+)
GND62
D14(+)
GND66
D15(+)
GND70
72
GND74
76
GND78
CK+
GND80
84
GND86
GND88
GND90
92
GND94
GND96
98
100
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
FMC_DI+0
FMC_DI-0
RDI0
100
FMC_DI+0
FMC_DI+1
FMC_DI-1
RDI1
100
FMC_DI+1
FMC_DI+2
FMC_DI-2
RDI2
100
FMC_DI+2
FMC_DI+3
FMC_DI-3
RDI3
100
FMC_DI+3
FMC_DI+4
FMC_DI-4
RDI4
100
FMC_DI+4
FMC_DI+5
FMC_DI-5
RDI5
100
FMC_DI+5
FMC_DI+6
FMC_DI-6
RDI6
100
FMC_DI+6
FMC_DI+7
FMC_DI-7
RDI7
100
FMC_DI+7
FMC_DI+8
FMC_DI-8
RDI8
100
FMC_DI+8
FMC_DI+9
FMC_DI-9
RDI9
100
FMC_DI+9
FMC_DI+10
FMC_DI-10
RDI10
100
FMC_DI+10
FMC_DI+11
FMC_DI-11
RDI11
100
FMC_DI+11
B
NATIONAL SEMICONDUCTOR CORPORATION
2900 Semiconductor Dr.
Santa Clara, CA 95051
USA
(408) 721-5000
www.national.com
PROJECT
NAME:
FMC Connector to Logic Analyzer Adaptor
Samtec ASP-65067-01
FMC_ORI+
FMC_ORI-
RORI
FMC_DCLK_DI+
FMC_DCLK_DI-
RDCLKI
DESIGNED:
DATE:
DRAWN:
DATE:
CHECKED:
DATE:
4
Logic Analyzer I Channel
100
THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO NATIONAL
SCHEMATIC REV:
SEMICONDUCTOR CORPORATION. USE OR DISCLOSURE WITHOUT
WRITTEN PERMISSION IS EXPRESSLY FORBIDDEN. COPYRIGHT 2007.
100
LAST MODIFIED: Thursday, June 16, 2011
5
PAGE TITLE
3
2
DOC # : ____________
1
Sheet
3 OF 4
0.92
A
5
4
3
2
1
FMC_DQD-[11..0]
FMC_DQD+[11..0]
DQD
D
D
FMC_DQD-0
FMC_DQD-1
FMC_DQD-2
FMC_DQD-3
FMC_DQD-4
FMC_DQD-5
FMC_DQD-6
FMC_DQD-7
FMC_DQD-8
FMC_DQD-9
FMC_DQD-10
FMC_DQD-11
C
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND1
3
GND5
D0(-)
GND9
D1(-)
GND13
D2(-)
GND17
D3(-)
GND21
D4(-)
GND25
D5(-)
GND29
D6(-)
GND33
D7(-)
GND37
D8(-)
GND41
D9(-)
GND45
D10(-)
GND49
D11(-)
GND53
D12(-)
GND57
D13(-)
GND61
D14(-)
GND65
D15(-)
GND69
71
GND73
75
GND77
79
GND81
83
GND85
87
GND89
91
GND93
GND95
97
99
GND2
4
GND6
D0(+)
GND10
D1(+)
GND14
D2(+)
GND18
D3(+)
GND22
D4(+)
GND26
D5(+)
GND30
D6(+)
GND34
D7(+)
GND38
D8(+)
GND42
D9(+)
GND46
D10(+)
GND50
D11(+)
GND54
D12(+)
GND58
D13(+)
GND62
D14(+)
GND66
D15(+)
GND70
72
GND74
76
GND78
CK+
GND80
84
GND86
GND88
GND90
92
GND94
GND96
98
100
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
FMC_DQD+0
FMC_DQD-0
RDQD0
100
FMC_DQD+0
FMC_DQD+1
FMC_DQD-1
RDQD1
100
FMC_DQD+1
FMC_DQD+2
FMC_DQD-2
RDQD2
100
FMC_DQD+2
FMC_DQD+3
FMC_DQD-3
RDQD3
100
FMC_DQD+3
FMC_DQD+4
FMC_DQD-4
RDQD4
100
FMC_DQD+4
FMC_DQD+5
FMC_DQD-5
RDQD5
100
FMC_DQD+5
FMC_DQD+6
FMC_DQD-6
RDQD6
100
FMC_DQD+6
FMC_DQD+7
FMC_DQD-7
RDQD7
100
FMC_DQD+7
FMC_DQD+8
FMC_DQD-8
RDQD8
100
FMC_DQD+8
FMC_DQD+9
FMC_DQD-9
RDQD9
100
FMC_DQD+9
FMC_DQD+10
FMC_DQD-10
RDQD10
100
FMC_DQD+10
FMC_DQD+11
FMC_DQD-11
RDQD11
100
FMC_DQD+11
C
Samtec ASP-65067-01
FMC_DCLK_DQD+
FMC_DCLK_DQDFMC_RCOUT2+
FMC_RCOUT2-
RDCLKQD
100
RCOUT2
100
FMC_DQ-[11..0]
FMC_DQ+[11..0]
DQ
FMC_DQ-0
FMC_DQ-1
FMC_DQ-2
B
FMC_DQ-3
FMC_DQ-4
FMC_DQ-5
FMC_DQ-6
FMC_DQ-7
FMC_DQ-8
FMC_DQ-9
FMC_DQ-10
FMC_DQ-11
A
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND1
3
GND5
D0(-)
GND9
D1(-)
GND13
D2(-)
GND17
D3(-)
GND21
D4(-)
GND25
D5(-)
GND29
D6(-)
GND33
D7(-)
GND37
D8(-)
GND41
D9(-)
GND45
D10(-)
GND49
D11(-)
GND53
D12(-)
GND57
D13(-)
GND61
D14(-)
GND65
D15(-)
GND69
71
GND73
75
GND77
79
GND81
83
GND85
87
GND89
91
GND93
GND95
97
99
GND2
4
GND6
D0(+)
GND10
D1(+)
GND14
D2(+)
GND18
D3(+)
GND22
D4(+)
GND26
D5(+)
GND30
D6(+)
GND34
D7(+)
GND38
D8(+)
GND42
D9(+)
GND46
D10(+)
GND50
D11(+)
GND54
D12(+)
GND58
D13(+)
GND62
D14(+)
GND66
D15(+)
GND70
72
GND74
76
GND78
CK+
GND80
84
GND86
GND88
GND90
92
GND94
GND96
98
100
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
FMC_DQ+0
FMC_DQ-0
RDQ0
100
FMC_DQ+1
FMC_DQ-1
RDQ1
100
FMC_DQ+0
FMC_DQ+1
FMC_DQ+2
FMC_DQ-2
RDQ2
100
FMC_DQ+2
FMC_DQ+3
FMC_DQ-3
RDQ3
100
FMC_DQ+3
FMC_DQ+4
FMC_DQ-4
RDQ4
100
FMC_DQ+4
FMC_DQ+5
FMC_DQ-5
RDQ5
100
FMC_DQ+5
FMC_DQ+6
FMC_DQ-6
RDQ6
100
FMC_DQ+6
FMC_DQ+7
FMC_DQ-7
RDQ7
100
FMC_DQ+7
FMC_DQ+8
FMC_DQ-8
RDQ8
100
FMC_DQ+8
FMC_DQ+9
FMC_DQ-9
RDQ9
100
FMC_DQ+9
FMC_DQ+10
FMC_DQ-10
RDQ10
100
FMC_DQ+10
FMC_DQ+11
FMC_DQ-11
RDQ11
100
FMC_DQ+11
B
NATIONAL SEMICONDUCTOR CORPORATION
2900 Semiconductor Dr.
Santa Clara, CA 95051
USA
(408) 721-5000
www.national.com
PROJECT
NAME:
Samtec ASP-65067-01
FMC_ORQ+
FMC_ORQ-
RORQ
FMC_DCLK_DQ+
FMC_DCLK_DQ-
RDCLKQ
100
FMC Connector to Logic Analyzer Adaptor
DESIGNED:
DATE:
DRAWN:
DATE:
CHECKED:
DATE:
4
Logic Analyzer Q Channel
THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO NATIONAL
SCHEMATIC REV:
SEMICONDUCTOR CORPORATION. USE OR DISCLOSURE WITHOUT
WRITTEN PERMISSION IS EXPRESSLY FORBIDDEN. COPYRIGHT 2007.
100
LAST MODIFIED: Thursday, June 16, 2011
5
PAGE TITLE
3
2
DOC # : ____________
1
Sheet
4 OF 4
0.92
A
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
