CD74HC4051QPWRG4Q1

CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER SCLS552A − DECEMBER 2003 − REVISED APRIL 2008 D Qualified for Automotive Applications D Wide Analog Input Voltage Range of D D Operation Control Voltage = 2 V to 6 V D Switch Voltage = 0 V to 10 V D High Noise Immunity NIL = 30%, NIH = 30% ±5 V Max Low ON Resistance − 70 Ω Typical (VCC − VEE = 4.5 V) − 40 Ω Typical (VCC − VEE = 9 V) of VCC, VCC = 5 V M OR PW PACKAGE (TOP VIEW) D Low Crosstalk Between Switches D Fast Switching and Propagation Speeds D Break-Before-Make Switching CHANNEL I/O A4 CHANNEL I/O A6 COM OUT/IN A CHANNEL I/O A7 CHANNEL I/O A5 E VEE GND description/ordering information This device is a digitally controlled analog switch that utilizes silicon-gate CMOS technology to achieve operating speeds similar to LSTTL, with the low power consumption of standard CMOS integrated circuits. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC CHANNEL I/O A2 CHANNEL I/O A1 CHANNEL I/O A0 CHANNEL I/O A3 ADDRESS SEL S0 ADDRESS SEL S1 ADDRESS SEL S2 This analog multiplexer/demultiplexer controls analog voltages that may vary across the voltage supply range (i.e., VCC to VEE). These bidirectional switches allow any analog input to be used as an output and vice versa. The switches have low ON resistance and low OFF leakages. In addition, the device has an enable control (E) that, when high, disables all switches to their OFF state. ORDERING INFORMATION{ −40°C 40°C to 125°C ORDERABLE PART NUMBER PACKAGE‡ TA TOP-SIDE MARKING SOIC − M Tape and reel CD74HC4051QM96Q1 HC4051Q TSSOP − PW Tape and reel CD74HC4051QPWRQ1 HJ4051Q † For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at http://www.ti.com. ‡ Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2008, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER SCLS552A − DECEMBER 2003 − REVISED APRIL 2008 FUNCTION TABLE INPUTS S0 ON CHANNEL(S) L L A0 L H A1 H L A2 H H A3 L L A4 L H A5 H H L A6 L H H H A7 H X X X None E S2 S1 L L L L L L L L L H L H L X = Don’t care logic diagram (positive logic) CHANNEL I/O VCC A7 A6 A5 A4 A3 A2 A1 A0 16 4 2 5 1 12 15 14 13 TG TG S0 11 TG Logic Level Conversion S2 TG Binary To 1 of 8 Decoder With Enable S1 10 9 3 TG TG TG E 6 TG 2 8 7 GND VEE POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 COM OUT/IN A CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER SCLS552A − DECEMBER 2003 − REVISED APRIL 2008 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC − VEE (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 10.5 V Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Supply voltage range, VEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +0.5 V to −7 V Input clamp current, IIK (VI < −0.5 V or VI > VCC + 0.5 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Output clamp current, IOK (VO < VEE − 0.5 V or VO > VCC + 0.5 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Switch current (VI > VEE − 0.5 V or VI < VCC + 0.5 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA VEE current, IEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −20 mA Package thermal impedance, θJA (see Note 2): M package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108°C/W Maximum junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Lead temperature (during soldering): At distance 1/16 ± 1/32 inch (1,59 ± 0,79 mm) from case for 10 s max . . . . . . . . . . . . . . . . . . . . . . . 300°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltages referenced to GND unless otherwise specified. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 3) MIN VCC MAX UNIT Supply voltage (see Note 4) 2 6 V Supply voltage, VCC − VEE (see Figure 1) 2 10 V VEE Supply voltage, (see Note 4 and Figure 2) 0 −6 V VIH High-level High level input voltage VCC = 2 V VCC = 4.5 V VCC = 6 V 1.5 3.15 VCC = 2 V VIL 0.5 VCC = 4.5 V Low-level Low level input voltage 1.35 VCC = 6 V VI Input control voltage VIS Analog switch I/O voltage tt Input transition (rise and fall) time TA Operating free-air temperature V 4.2 V 1.8 0 VCC V VEE VCC V VCC = 2 V 0 1000 VCC = 4.5 V 0 500 VCC = 6 V 0 400 −40 125 ns °C NOTES: 3. All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 4. In certain applications, the external load resistor current may include both VCC and signal-line components. To avoid drawing VCC current when switch current flows into the transmission gate inputs, the voltage drop across the bidirectional switch must not exceed 0.6 V (calculated from ron values shown in electrical characteristics table). No VCC current flows through RL if the switch current flows into the COM OUT/IN A terminal. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER SCLS552A − DECEMBER 2003 − REVISED APRIL 2008 recommended operating area as a function of supply voltages 8 (VCC − GND) − V (VCC − GND) − V 8 6 HCT HC 4 2 0 0 2 4 6 8 10 6 HCT HC 4 2 0 12 0 −2 (VCC − VEE) − V −4 −6 −8 (VEE − GND) − V Figure 1 Figure 2 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VEE MIN VIS = VCC or VEE ron IO = 1 mA, VI = VIH or VIL, See Figure 8 VIS = VCC to VEE ∆ron IIZ IIL ICC 4 Between any two channels For switch OFF: When VIS = VCC, VOS = VEE; When VIS = VEE, VOS = VCC For switch ON: All applicable combinations of VIS and VOS voltage levels, VI = VIH or VIL TYP MAX MIN 0V 4.5 V 70 160 240 0V 6V 60 140 210 −4.5 V 4.5 V 40 120 180 0V 4.5 V 90 180 270 0V 6V 80 160 240 −4.5 V 4.5 V 45 130 195 0V 4.5 V 10 0V 6V 8.5 −4.5 V 4.5 V 0V 6V Ω Ω 5 ±0.2 ±2 A µA −5 V 5V ±0.4 ±4 0V 6V ±0.1 ±1 0V 6V 8 160 When VIS = VCC, VOS = VEE −5 V 5V 16 320 POST OFFICE BOX 655303 UNIT MAX When VIS = VEE, VOS = VCC VI = VCC or GND IO = 0, VI = VCC or GND TA = −40°C TO 125°C TA = 25°C VCC µA µA • DALLAS, TEXAS 75265 CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER SCLS552A − DECEMBER 2003 − REVISED APRIL 2008 switching characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 7) PARAMETER FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE VEE MIN CL = 15 pF tpd IN OUT CL = 50 pF 5V 0V −4.5 V ten OUT CL = 50 pF −4.5 V tdis OUT CL = 50 pF −4.5 V CI Control 4 ns 90 18 6V 10 15 8 12 2V 225 340 4.5 V 45 68 6V 38 57 4.5 V 32 48 2V 225 340 4.5 V 45 68 6V 38 57 4.5 V 32 48 10 10 4.5 V CL = 50 pF UNIT MAX 12 5V 0V MIN 60 CL = 15 pF ADDRESS SEL or E MAX 2V 5V 0V TYP 4.5 V CL = 15 pF ADDRESS SEL or E TA = −40°C TO 125°C TA = 25°C VCC ns 19 ns 19 ns pF operating characteristics, VCC = 5 V, TA = 25°C, Input tr, tf = 6 ns PARAMETER Cpd TYP Power dissipation capacitance (see Note 5) 50 UNIT pF NOTE 5: Cpd is used to determine the dynamic power consumption, per package. PD = Cpd VCC2 fI + Σ (CL + CS) VCC2 fO fO = output frequency fI = input frequency CL = output load capacitance CS = switch capacitance VCC = supply voltage POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER SCLS552A − DECEMBER 2003 − REVISED APRIL 2008 analog channel characteristics, TA = 25°C PARAMETER TEST CONDITIONS CI Switch input capacitance CCOM Common output capacitance fmax VEE Minimum switch frequency response at −3 dB See Figure 3 and Figure 9, and Notes 6 and 7 Sine wave distortion Sine-wave See Figure 4 E or ADDRESS SEL to switch feed-through noise See Figure 5, 5 and Notes 7 and 8 Switch OFF signal feed through See Figure 6 and Figure 10, and Notes 7 and 8 VCC MIN TYP MAX UNIT 5 pF 25 pF −2.25 V 2.25 V 145 −4.5 V 4.5 V 180 −2.25 V 2.25 V 0.035 −4.5 V 4.5 V 0.018 −2.25 V 2.25 V (TBD) −4.5 V 4.5 V (TBD) −2.25 V 2.25 V −73 −4.5 V 4.5 V −75 MHz % mV dB NOTES: 6. Adjust input voltage to obtain 0 dBm at VOS for fIN = 1 MHz. 7. VIS is centered at (VCC − VEE)/2. 8. Adjust input for 0 dBm. PARAMETER MEASUREMENT INFORMATION VCC VIS 0.1 mF VCC VOS Switch ON 50Ω 10 pF dB Meter Sine Wave 10 mF VIS Switch ON VIS VI = VIH VOS 10 kΩ 50 pF Distortion Meter VCC/2 VCC/2 fIS = 1 kHz to 10 kHz Figure 3. Frequency-Response Test Circuit 6 POST OFFICE BOX 655303 Figure 4. Sine-Wave Distortion Test Circuit • DALLAS, TEXAS 75265 CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER SCLS552A − DECEMBER 2003 − REVISED APRIL 2008 PARAMETER MEASUREMENT INFORMATION E VCC 600 W VCC/2 Switch Alternating ON and OFF tr, tf ≤ 6 ns fCONT = 1 MHz 50% Duty Cycle VCC 0.1µF VOS Switch OFF VIS 600 W fIS ≥ 1-MHz Sine Wave R = 50 Ω C = 10 pF VP−P VOS 50 pF Scope VC = VIL R R VCC/2 VCC/2 VOS C dB Meter VCC/2 Figure 5. Control to Switch Feedthrough Noise Test Circuit POST OFFICE BOX 655303 Figure 6. Switch OFF Signal Feedthrough Test Circuit • DALLAS, TEXAS 75265 7 CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER SCLS552A − DECEMBER 2003 − REVISED APRIL 2008 PARAMETER MEASUREMENT INFORMATION VCC Test Point From Output Under Test PARAMETER S1 S2 tPZH Open Closed tPZL Closed Open tPHZ Open Closed tPLZ Closed Open tpd Open Open Output Control 50% VCC S1 ten RL = 1 kΩ tdis CL (see Note A) S2 VEE LOAD CIRCUIT VCC Input 50% VCC 50% VCC VEE tPLH In-Phase Output 50% 10% 90% tPHL 90% 0V tPHL 90% tr Out-of-Phase Output VCC 50% VCC tPZL VOH 50% VCC 10% VOL tf 50% VCC 10% tf 50% 10% 90% tr VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT TRANSITION TIMES 50% VCC tPZH VOH VOL ≈VCC Output Waveform 1 (see Note B) tPLH tPLZ Output Waveform 2 (see Note B) 10% VOL tPHZ 50% VCC 90% VOH ≈0 V VOLTAGE WAVEFORMS OUTPUT ENABLE AND DISABLE TIMES NOTES: A. CL includes probe and test-fixture capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 6 ns, tf = 6 ns. D. For clock inputs, fmax is measured with the input duty cycle at 50%. E. The outputs are measured one at a time with one input transition per measurement. F. tPLZ and tPHZ are the same as tdis. G. tPZL and tPZH are the same as ten. H. tPLH and tPHL are the same as tpd. Figure 7. Load Circuit and Voltage Waveforms 8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER SCLS552A − DECEMBER 2003 − REVISED APRIL 2008 TYPICAL CHARACTERISTICS 120 ON Resistance − Ω 100 80 VCC − VEE = 4.5 V 60 VCC − VEE = 6 V 40 VCC − VEE = 9 V 20 1 2 3 4 5 6 Input Signal Voltage − V 7 8 9 Figure 8. Typical ON Resistance vs Input Signal Voltage 0 0 VCC = 4.5 V GND = −4.5 V VEE = −4.5 V RL = 50 Ω PIN 12 TO 3 −4 −20 VCC = 2.25 V GND = −2.25 V VEE = −2.25 V RL = 50 Ω PIN 12 TO 3 −6 dB dB −2 −8 −10 10K VCC = 2.25 V GND = −2.25 V VEE = −2.25 V RL = 50 Ω PIN 12 TO 3 −40 −60 VCC = 4.5 V GND = −4.5 V VEE = −4.5 V RL = 50 Ω PIN 12 TO 3 −80 100K 1M Frequency − Hz 10M 100M −100 10K 100K 1M 10M 100M Frequency − Hz Figure 9. Channel ON Bandwidth POST OFFICE BOX 655303 Figure 10. Channel OFF Feedthrough • DALLAS, TEXAS 75265 9 PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) CD74HC4051QM96G4Q1 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) NIPDAU Level-1-260C-UNLIM -40 to 125 HC4051Q CD74HC4051QM96Q1 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) NIPDAU Level-1-260C-UNLIM -40 to 125 HC4051Q CD74HC4051QPWRG4Q1 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) NIPDAU Level-1-260C-UNLIM -40 to 125 HJ4051Q CD74HC4051QPWRQ1 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) NIPDAU Level-1-260C-UNLIM -40 to 125 HJ4051Q (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of