CD74HCT245M96G4

CD54HC245, CD74HC245, CD54HCT245, CD74HCT245 SCHS119B – NOVEMBER 1998 – REVISED JULY 2022 CDx4HC(T)245 High-Speed CMOS Logic Octal-Bus Transceiver, Three-State, NonInverting 1 Features 2 Description • • • • The CDx4HC(T)245 is an octal bus transceiver with 3-state outputs. All eight channels are controlled by the direction (DIR) pin and output enable (OE) pin. • • • • • • Buffered inputs Three-state outputs Bus line driving capability Typical propagation delay (A to B, B to A) 9ns at VCC = 5V, CL = 15pF, TA = 25°C Fanout (over temperature range) – Bus driver outputs :15 LSTTL loads Wide operating temperature range : -55°C to 125°C Balanced propagation delay and transition times Significant power reduction compared to LSTTL logic ICs HC types – 2 V to 6 V Operation – High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5 V HCT types – 4.5 V to 5.5 V operation – Direct LSTTL input logic compatibility, VIL= 0.8 V (Max), VIH = 2 V (Min) – CMOS input compatibility, Il ≤ 1µA at VOL, VOH Device Information (1) PART NUMBER PACKAGE BODY SIZE (NOM) CD54HC245F J (CDIP, 20) 26.92 mm × 6.92 mm CD74HC245 N (PDIP, 20) 25.40 mm × 6.35 mm DW (SOIC, 20) 12.80 mm × 7.50 mm CD54HCT245F J (CDIP, 20) 26.92 mm × 6.92 mm CD74HCT245 N (PDIP, 20) 25.40 mm × 6.35 mm DW (SOIC, 20) 12.80 mm × 7.50 mm (1) For all packages see the orderable addendum at the end of the data sheet. Functional Block Diagram An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. CD54HC245, CD74HC245, CD54HCT245, CD74HCT245 www.ti.com SCHS119B – NOVEMBER 1998 – REVISED JULY 2022 Table of Contents 1 Features............................................................................1 2 Description.......................................................................1 3 Revision History.............................................................. 2 4 Pin Configuration and Functions...................................3 5 Specifications.................................................................. 4 5.1 Absolute Maximum Ratings........................................ 4 5.2 Recommended Operating Conditions.........................4 5.3 Thermal Information....................................................4 5.4 Electrical Characteristics.............................................5 5.5 Switching Characteristics............................................6 6 Parameter Measurement Information............................ 7 7 Detailed Description........................................................8 7.1 Overview..................................................................... 8 7.2 Device Functional Modes............................................8 8 Power Supply Recommendations..................................9 9 Layout...............................................................................9 9.1 Layout Guidelines....................................................... 9 10 Device and Documentation Support..........................10 10.1 Documentation Support.......................................... 10 10.2 Receiving Notification of Documentation Updates..10 10.3 Support Resources................................................. 10 10.4 Trademarks............................................................. 10 10.5 Electrostatic Discharge Caution..............................10 10.6 Glossary..................................................................10 11 Mechanical, Packaging, and Orderable Information.................................................................... 10 3 Revision History NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision A (April 2003) to Revision B (July 2022) Page • Updated the numbering, formatting, tables, figures and cross-references throughout the document to reflect modern datasheet standards.............................................................................................................................. 1 2 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated Product Folder Links: CD54HC245 CD74HC245 CD54HCT245 CD74HCT245 CD54HC245, CD74HC245, CD54HCT245, CD74HCT245 www.ti.com SCHS119B – NOVEMBER 1998 – REVISED JULY 2022 4 Pin Configuration and Functions J, N and DW Package 20-Pin CDIP, PDIP or SOIC Top View Copyright © 2022 Texas Instruments Incorporated Submit Document Feedback Product Folder Links: CD54HC245 CD74HC245 CD54HCT245 CD74HCT245 3 CD54HC245, CD74HC245, CD54HCT245, CD74HCT245 www.ti.com SCHS119B – NOVEMBER 1998 – REVISED JULY 2022 5 Specifications 5.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) MIN MAX -0.5 7 UNIT VCC Supply voltage V IIK Input diode current For VI < -0.5V or VI > VCC + 0.5V ±20 mA IOK Output diode current For VO < -0.5V or VO > VCC + 0.5V ±20 mA IO Drain current, per output For -0.5V < VO < VCC + 0.5V ±35 mA IO Output source or sink current per output pin For VO > -0.5V or VO < VCC + 0.5V ±25 mA Continuous current through VCC or GND ±50 mA TJ Junction temperature 150 °C Tstg Storage temperature range 150 °C 300 °C -65 Lead temperature (Soldering 10s)(SOIC - lead tips only) (1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 5.2 Recommended Operating Conditions VCC Supply voltage range VI Input voltage VO Output voltage HC types HCT types MIN MAX 2 6 4.5 5.5 0 VCC V VCC V 0 VCC = 2V tt TA Input rise and fall time UNIT V 1000 VCC = 4.5V 500 VCC = 6V 400 Temperature range -55 125 ns °C 5.3 Thermal Information THERMAL METRIC RθJA (1) 4 Junction-to-ambient thermal resistance (1) DW (SOIC) N (PDIP) 20 PINS 20 PINS UNIT 58 69 °C/W For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report. Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated Product Folder Links: CD54HC245 CD74HC245 CD54HCT245 CD74HCT245 CD54HC245, CD74HC245, CD54HCT245, CD74HCT245 www.ti.com SCHS119B – NOVEMBER 1998 – REVISED JULY 2022 5.4 Electrical Characteristics TEST VCC(V) CONDITIONS(1) PARAMETER -40°C to 85°C 25°C MIN TYP MAX MIN MAX -55°C to 125°C MIN UNIT MAX HC TYPES VIH High-level input voltage VIL Low-level input voltage 2 1.5 1.5 1.5 V 4.5 3.15 3.15 3.15 V 6 4.2 4.2 4.2 V 2 0.5 0.5 0.5 V 4.5 1.35 1.35 1.35 V 1.8 V 6 High-level output voltage CMOS loads VOH High-level output voltage TTL loads Low-level output voltage CMOS loads VOL 1.8 1.8 IOH = – 20 μA 2 1.9 1.9 1.9 V IOH = – 20 μA 4.5 4.4 4.4 4.4 V IOH = – 20 μA 6 5.9 5.9 5.9 V IOH = – 4 mA 4.5 3.98 3.84 3.7 V 6 5.48 5.48 5.2 V IOH = – 5.2 mA IOL = 20 μA 2 0.1 0.1 0.1 V IOL = 20 μA 4.5 0.1 0.1 0.1 V IOL = 20 μA 6 0.1 0.1 0.1 V Low-level output voltage TTL IOL = 4 mA 4.5 0.26 0.33 0.4 V IOL = 5.2 mA 6 0.26 0.33 0.4 V II Input leakage current VI = VCC or GND 6 ±0.1 ±1 ±1 µA ICC Quiescent device current VI = VCC or GND 6 8 80 160 µA IOZ Three-state leakage current VO = VCC or GND 6 ±0.5 ±5 ±10 µA HCT TYPES VIH High-level input voltage 4.5 to 5.5 VIL Low-level input voltage 4.5 to 5.5 2 2 2 0.8 0.8 V 0.8 V High-level output voltage CMOS loads IOH = – 20 μA 4.5 4.4 4.4 4.4 V High-level output voltage TTL IOH = – 4 mA 4.5 3.98 3.84 3.7 V Low-level output voltage CMOS IOL = 20 μA 4.5 0.1 0.1 0.1 V Low-level output voltage TTL IOH = 4 mA 4.5 0.26 0.33 0.4 V II Input leakage current VI = VCC and GND 5.5 ±0.1 ±1 ±1 µA ICC Quiescent device current VI = VCC and GND 5.5 8 80 160 µA IOZ Three-state leakage current VO = VCC or GND 6 ±0.5 ±5 ±10 µA An or Bn input held at VCC – 2.1 V 4.5 to 5.5 100 144 180 196 µA OE input held at VCC – 2.1 V 4.5 to 5.5 100 540 675 735 µA DIR input held at VCC – 2.1 V 4.5 to 5.5 100 324 405 441 µA VOH VOL ∆ICC (1) (1) Additional quiescent device current per input pin For dual-supply systems theoretical worst case (VI = 2.4V, VCC = 5.5V) specification is 1.8mA Copyright © 2022 Texas Instruments Incorporated Submit Document Feedback Product Folder Links: CD54HC245 CD74HC245 CD54HCT245 CD74HCT245 5 CD54HC245, CD74HC245, CD54HCT245, CD74HCT245 www.ti.com SCHS119B – NOVEMBER 1998 – REVISED JULY 2022 5.5 Switching Characteristics (2) Input tt= 6ns. Unless otherwise specified, CL = 50pF PARAMETER VCC (V) 25°C MIN TYP -40°C to 85°C MAX MIN -55°C to 125°C MAX MIN MAX UNIT HC TYPES tpd tdis ten Propagation delay data to output Output disable to output Output enable to output tt Output transition time Ci Input capacitance Cio Three-state output capacitance Cpd Power dissipation capacitance 2 110 140 165 4.5 22 28 33 6 19 24 28 2 150 190 225 4.5 30 38 45 6 26 33 38 ns ns 2 150 190 225 4.5 30 38 45 6 26 33 38 2 60 75 90 4.5 12 15 18 10 13 15 10 10 10 pF 20 20 20 pF 6 10 5 53 ns ns pF HCT TYPES tpd Data to output 4.5 26 33 39 ns tdis Output disable to output 4.5 30 38 45 ns ten Output enable to output 4.5 32 40 48 ns tt Output transition time 4.5 12 15 18 ns Ci Input capacitance 10 10 10 pF Cio Three-state output capacitance 20 20 20 pF Cpd Power dissipation capacitance(1) (2) (1) (2) 6 10 5 55 pF CPD is used to determine the dynamic power consumption, per channel. PD = VCC 2 fi (CPD + CL) where fi = Input Frequency, CL = Output Load Capacitance, VCC = Supply Voltage. Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated Product Folder Links: CD54HC245 CD74HC245 CD54HCT245 CD74HCT245 CD54HC245, CD74HC245, CD54HCT245, CD74HCT245 www.ti.com SCHS119B – NOVEMBER 1998 – REVISED JULY 2022 6 Parameter Measurement Information tpd is the maximum between tPLH and tPHL tt is the maximum between tTLH and tTHL Figure 6-1. HC transition times and propagation delay times, combination logic Figure 6-3. HC three-state propagation delay waveform Figure 6-2. HCT transition times and propagation delay times, combination logic Figure 6-4. HCT three-state propagation delay waveform Figure 6-5. HC and HCT three-state propagation delay test circuit Copyright © 2022 Texas Instruments Incorporated Submit Document Feedback Product Folder Links: CD54HC245 CD74HC245 CD54HCT245 CD74HCT245 7 CD54HC245, CD74HC245, CD54HCT245, CD74HCT245 www.ti.com SCHS119B – NOVEMBER 1998 – REVISED JULY 2022 7 Detailed Description 7.1 Overview The CD54HC245, CD54HCT245, and CD74HC245, CD74HCT245 are high-speed octal three-state bidirectional transceivers intended for two-way asynchronous communication between data buses. They have high drive current outputs which enable high-speed operation while driving large bus capacitances. They provide the low power consumption of standard CMOS circuits with speeds and drive capabilities comparable to that of LSTTL circuits. The CD54HC245, CD54HCT245, CD74HC245 and CD74HCT245 allow data transmission of the B bus or from the B bus to the A bus. The logic level at the direction input (DIR) determines the direction. The output enable input (OE), when high, puts the I/O ports in the high-impedance state. The HC/HCT245 is similar in operation to the HC/HCT640 and the HC/HCT643. Functional Block Diagram 7.2 Device Functional Modes Table 7-1. Truth Table Control Inputs(1) (1) 8 Submit Document Feedback OE DIR Operation L L B Data to A Bus L H A Data to B Bus H X Isolation H = High Level, L = Low Level, X = Irrelevant Copyright © 2022 Texas Instruments Incorporated Product Folder Links: CD54HC245 CD74HC245 CD54HCT245 CD74HCT245 CD54HC245, CD74HC245, CD54HCT245, CD74HCT245 www.ti.com SCHS119B – NOVEMBER 1998 – REVISED JULY 2022 8 Power Supply Recommendations The power supply can be any voltage between the minimum and maximum supply voltage rating located in the Recommended Operating Conditions. Each VCC terminal should have a good bypass capacitor to prevent power disturbance. A 0.1-μF capacitor is recommended for this device. It is acceptable to parallel multiple bypass caps to reject different frequencies of noise. The 0.1-μF and 1-μF capacitors are commonly used in parallel. The bypass capacitor should be installed as close to the power terminal as possible for best results. 9 Layout 9.1 Layout Guidelines When using multiple-input and multiple-channel logic devices inputs must not ever be left floating. In many cases, functions or parts of functions of digital logic devices are unused; for example, when only two inputs of a triple-input AND gate are used or only 3 of the 4 buffer gates are used. Such unused input pins must not be left unconnected because the undefined voltages at the outside connections result in undefined operational states. All unused inputs of digital logic devices must be connected to a logic high or logic low voltage, as defined by the input voltage specifications, to prevent them from floating. The logic level that must be applied to any particular unused input depends on the function of the device. Generally, the inputs are tied to GND or VCC, whichever makes more sense for the logic function or is more convenient. Copyright © 2022 Texas Instruments Incorporated Submit Document Feedback Product Folder Links: CD54HC245 CD74HC245 CD54HCT245 CD74HCT245 9 CD54HC245, CD74HC245, CD54HCT245, CD74HCT245 www.ti.com SCHS119B – NOVEMBER 1998 – REVISED JULY 2022 10 Device and Documentation Support TI offers an extensive line of development tools. Tools and software to evaluate the performance of the device, generate code, and develop solutions are listed below. 10.1 Documentation Support 10.1.1 Related Documentation 10.2 Receiving Notification of Documentation Updates To receive notification of documentation updates, navigate to the device product folder on ti.com. Click on Subscribe to updates to register and receive a weekly digest of any product information that has changed. For change details, review the revision history included in any revised document. 10.3 Support Resources TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight from the experts. Search existing answers or ask your own question to get the quick design help you need. Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use. 10.4 Trademarks TI E2E™ is a trademark of Texas Instruments. All trademarks are the property of their respective owners. 10.5 Electrostatic Discharge Caution This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. 10.6 Glossary TI Glossary This glossary lists and explains terms, acronyms, and definitions. 11 Mechanical, Packaging, and Orderable Information The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. 10 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated Product Folder Links: CD54HC245 CD74HC245 CD54HCT245 CD74HCT245 PACKAGE OPTION ADDENDUM www.ti.com 29-Jul-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) CD54HC245F ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 CD54HC245F Samples CD54HC245F3A ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 8408501RA CD54HC245F3A Samples CD54HCT245F ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 CD54HCT245F Samples CD54HCT245F3A ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 8550601RA CD54HCT245F3A Samples CD74HC245E ACTIVE PDIP N 20 20 RoHS & Green NIPDAU N / A for Pkg Type -55 to 125 CD74HC245E Samples CD74HC245M ACTIVE SOIC DW 20 25 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 HC245M Samples CD74HC245M96 ACTIVE SOIC DW 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 HC245M Samples CD74HCT245E ACTIVE PDIP N 20 20 RoHS & Non-Green NIPDAU N / A for Pkg Type -55 to 125 CD74HCT245E Samples CD74HCT245EE4 ACTIVE PDIP N 20 20 RoHS & Non-Green NIPDAU N / A for Pkg Type -55 to 125 CD74HCT245E Samples CD74HCT245M ACTIVE SOIC DW 20 25 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 HCT245M Samples CD74HCT245M96 ACTIVE SOIC DW 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 HCT245M Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of