CDC203
3.3-V HEX INVERTER/CLOCK DRIVER
SCAS324A – OCTOBER 1989 – REVISED NOVEMBER 1995
D
D
D
D
D
D
D
D
DW PACKAGE
(TOP VIEW)
Replaces 74AC11203
Low-Skew Propagation Delay
Specifications for Clock Driver
Applications
Operates at 3.3-V VCC
Flow-Through Architecture Optimizes
PCB Layout
Center-Pin VCC and GND Pin
Configurations Minimize High-Speed
Switching Noise
EPIC (Enhanced-Performance Implanted
CMOS) 1-µm Process
500-mA Typical Latch-Up Immunity
at 125°C
Packaged in Plastic Small-Outline Package
1Y
2Y
3Y
GND
GND
GND
GND
4Y
5Y
6Y
1
20
2
19
3
18
4
17
5
16
6
15
7
14
8
13
9
12
10
11
1A
2A
3A
NC
VCC
VCC
NC
4A
5A
6A
NC – No internal connection
description
The CDC203 contains six independent inverters. The device performs the Boolean function Y = A. It is designed
specifically for applications requiring low skew between switching outputs.
The CDC203 is characterized for operation from 25°C to 70°C.
FUNCTION TABLE
INPUT
A
OUTPUT
Y
H
L
L
H
logic symbol†
1A
2A
3A
4A
5A
6A
20
logic diagram (positive logic)
1
1
19
2
18
3
13
8
12
9
11
10
1Y
1A
20
1
19
2
18
3
13
8
12
9
11
10
1Y
2Y
3Y
2A
2Y
4Y
5Y
3A
3Y
6Y
† This symbol is in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
4A
5A
6A
4Y
5Y
6Y
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
Copyright 1995, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
CDC203
3.3-V HEX INVERTER/CLOCK DRIVER
SCAS324A – OCTOBER 1989 – REVISED NOVEMBER 1995
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC + 0.5 V
Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC + 0.5 V
Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 mA
Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA
Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±150 mA
Maximum power dissipation at TA = 55°C (in still air) (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
2. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils.
For more information, refer to the Package Thermal Considerations application note in the 1994 ABT Advanced BiCMOS Technology
Data Book, literature number SCBD002B.
recommended operating conditions
VCC
Supply voltage
VIH
High level input voltage
High-level
VCC = 3 V
VCC = 3.6 V
VIL
Low level input voltage
Low-level
VCC = 3 V
VCC = 3.6 V
VI
VO
Input voltage
NOM
MAX
3
3.3
3.6
2.1
Output voltage
0.9
1.1
0
IOH
High level output current
High-level
IOL
Low level output current
Low-level
VCC = 3 V
VCC = 3.6 V
∆t / ∆v
Input transition rise or fall rate
fclock
TA
Input clock frequency
Operating free-air temperature
• DALLAS, TEXAS 75265
– 12
12
12
25
POST OFFICE BOX 655303
VCC
VCC
– 12
0
UNIT
V
V
2.5
0
VCC = 3 V
VCC = 3.6 V
2
MIN
V
V
V
mA
mA
10
ns / V
40
MHz
70
°C
CDC203
3.3-V HEX INVERTER/CLOCK DRIVER
SCAS324A – OCTOBER 1989 – REVISED NOVEMBER 1995
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
IOH = – 50 µA
VOH
IOH = – 12 mA
IOL = 50 µA
VOL
IOL = 12 mA
II
ICC
VI = VCC or GND
VI = VCC or GND,
Ci
VI = VCC or GND
IO = 0
TA = 25°C
VCC
MIN
TYP
MAX
MIN
3V
2.9
3.6 V
3.5
3.5
3V
2.58
2.48
3.6 V
3.18
MAX
UNIT
2.9
V
3.08
3V
0.1
0.1
3.6 V
0.1
0.1
3V
0.36
0.44
3.6 V
0.36
0.44
3.6 V
± 0.1
±1
µA
4
40
µA
3.6 V
3.3 V
4
V
pF
switching characteristics over recommended operating free-air temperature range,
VCC = 3.3 V ± 0.3 V (see Note 3 and Figures 1 and 2)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
tPLH
tPHL
A
Y
tsk(o)
A
Y
MIN
MAX
3.5
6.1
3.5
6.1
0.7
UNIT
ns
ns
NOTE 3: All specifications are valid only for all outputs switching in phase simultaneously.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
CDC203
3.3-V HEX INVERTER/CLOCK DRIVER
SCAS324A – OCTOBER 1989 – REVISED NOVEMBER 1995
PARAMETER MEASUREMENT INFORMATION
From Output
Under Test
CL = 30 pF
(see Note A)
500 Ω
LOAD CIRCUIT
VCC
Input
(see Note B)
50%
50%
0V
tPLH
tPHL
50% VCC
Output
VOH
50% VCC
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
NOTES: A. CL includes probe and jig capacitance.
B. Input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr = 3 ns, tf = 3 ns.
C. The outputs are measured one at a time with one input transition per measurement.
Figure 1. Load Circuit and Voltage Waveforms
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
CDC203
3.3-V HEX INVERTER/CLOCK DRIVER
SCAS324A – OCTOBER 1989 – REVISED NOVEMBER 1995
PARAMETER MEASUREMENT INFORMATION
50%
1A – 6A
50%
50%
Y1
50%
tPHL1
tPLH1
50%
Y2
50%
tPHL2
tPLH2
50%
Y3
50%
tPHL3
tPLH3
Y4
50%
50%
tPHL4
tPLH4
50%
Y5
50%
tPHL5
tPLH5
50%
Y6
50%
tPHL6
tPLH6
NOTE A: Output skew, tsk(o), is calculated as the greater of:
– The difference between the fastest and slowest of tPLHn (n = 1, 2, . . . , 6)
– The difference between the fastest and slowest of tPHLn (n = 1, 2, . . . , 6)
Figure 2. Waveforms for Calculation of tsk(o)
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
PACKAGE OPTION ADDENDUM
www.ti.com
20-Aug-2021
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
CDC203DW
ACTIVE
SOIC
DW
20
25
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
25 to 70
CDC203
CDC203DWG4
ACTIVE
SOIC
DW
20
25
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
25 to 70
CDC203
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“CDC203DWRG4”相匹配的价格&库存,您可以联系我们找货
免费人工找货