CLVC139AQPWRG4Q1

SN74LVC139A-Q1 DUAL 2-LINE TO 4-LINE DECODER/DEMULTIPLEXER SCAS782B − SEPTEMBER 2004 – REVISED JANUARY 2008 D D D D D D D D D OR PW PACKAGE (TOP VIEW) Qualified for Automotive Applications Operates From 1.65 V to 3.6 V Inputs Accept Voltages to 5.5 V Max tpd of 6.2 ns Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C Latch-Up Performance Exceeds 250 mA Per JESD 17 ESD Protection Level Per AEC-Q100 Classification − 2000-V (H2) Human-Body Model − 200-V (M3) Machine Model − 1000-V (C5) Charged-Device Model 1G 1A 1B 1Y0 1Y1 1Y2 1Y3 GND 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC 2G 2A 2B 2Y0 2Y1 2Y2 2Y3 description/ordering information This dual 2-line to 4-line decoder/demultiplexer is designed for 1.65-V to 3.6-V VCC operation. The device comprises two individual 2-line to 4-line decoders in a single package. The active-low enable (G) input can be used as a data line in demultiplexing applications. This decoder/demultiplexer features fully buffered inputs, each of which represents only one normalized load to its driving circuit. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3.3-V/5-V system environment. ORDERING INFORMATION† −40°C 40°C to 125°C ORDERABLE PART NUMBER PACKAGE‡ TA TOP-SIDE MARKING SOIC − D Reel of 2500 SN74LVC139AQDRQ1 LVC139AQ TSSOP − PW Reel of 2000 SN74LVC139AQPWRQ1 LC139AQ † For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. ‡ Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. FUNCTION TABLE (each decoder/demultiplexer) INPUTS G OUTPUTS SELECT B A Y3 Y2 Y1 Y0 L L L H H H L L L H H H L H L H L H L H H L H H L H H H H X X H H H H Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2008, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN74LVC139A-Q1 DUAL 2-LINE TO 4-LINE DECODER/DEMULTIPLEXER SCAS782B − SEPTEMBER 2004 – REVISED JANUARY 2008 logic diagram (positive logic) 4 1G 5 6 1A Select Inputs 1B 1Y0 1 1Y1 1Y2 2 7 3 1Y3 Data Outputs 12 2G 11 10 2A Select Inputs 2B 2Y0 15 2Y1 2Y2 14 9 13 2Y3 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 6.5 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 6.5 V Output voltage range, VO (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −50 mA Output clamp current, IOK (VO < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −50 mA Continuous output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±100 mA Package thermal impedance, θJA (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73°C/W (see Note 3): PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The value of VCC is provided in the recommended operating conditions table. 3. The package thermal impedance is calculated in accordance with JESD 51-7. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN74LVC139A-Q1 DUAL 2-LINE TO 4-LINE DECODER/DEMULTIPLEXER SCAS782B − SEPTEMBER 2004 – REVISED JANUARY 2008 recommended operating conditions (see Note 4) Operating VCC Supply voltage Data retention only High-level High level input voltage MAX 3.6 Low-level Low level input voltage VI Input voltage VO Output voltage IOH High level output current High-level V 0.65 × VCC VCC = 2.3 V to 2.7 V 1.7 VCC = 2.7 V to 3.6 V 2 V 0.35 × VCC VCC = 1.65 V to 1.95 V VIL VCC = 2.3 V to 2.7 V 0.7 VCC = 2.7 V to 3.6 V 0.8 Low level output current Low-level ∆t/∆v Input transition rise or fall rate TA Operating free-air temperature V 0 5.5 V 0 VCC V VCC = 1.65 V −4 VCC = 2.3 V −8 VCC = 2.7 V −12 VCC = 3 V −24 VCC = 1.65 V IOL UNIT 1.5 VCC = 1.65 V to 1.95 V VIH MIN 1.65 mA 4 VCC = 2.3 V 8 VCC = 2.7 V 12 VCC = 3 V 24 −40 mA 10 ns/V 125 °C NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC IOH = −100 µA VOH 1.65 V to 3.6 V † TA = −405C TO 855C MAX MIN VCC − 0.2 VCC − 0.2 1.65 V 1.2 1.2 2.3 V 1.7 1.7 2.7 V 2.1 2.2 3V 2.3 2.4 3V 2.1 IOL = 100 µA All inputs TYP† IOH = −8 mA IOH = −24 mA II MIN IOH = −4 mA IOH = −12 12 mA VOL TA = −405C TO 1255C TYP† MAX UNIT V 2.2 1.65 V to 3.6 V 0.2 0.2 IOL = 4 mA 1.65 V 0.45 0.45 IOL = 8 mA 2.3 V 0.7 0.7 IOL = 12 mA 2.7 V 0.4 0.4 IOL = 24 mA 3V 0.55 0.55 3.6 V ±5 ±5 µA 3.6 V 10 10 µA 500 500 µA VI = 5.5 V or GND ICC VI = VCC or GND, ∆ICC One input at VCC − 0.6 V, Other inputs at VCC or GND IO = 0 Ci VI = VCC or GND 2.7 V to 3.6 V 3.3 V 5 5 V pF All typical values are at VCC = 3.3 V, TA = 25°C. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN74LVC139A-Q1 DUAL 2-LINE TO 4-LINE DECODER/DEMULTIPLEXER SCAS782B − SEPTEMBER 2004 – REVISED JANUARY 2008 switching characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) VCC = 2.7 V TO (OUTPUT) A or B tpd Y G VCC = 3.3 V ± 0.3 V UNIT MIN MAX MIN MAX 1 8.8 1 7.7 1 6.7 1 6.2 tsk(o) 1 ns ns operating characteristics, TA = 25°C PARAMETER Cpd 4 Power dissipation capacitance TEST CONDITIONS VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V TYP TYP TYP 28.5 29.5 30.5 f = 10 MHz POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 UNIT pF SN74LVC139A-Q1 DUAL 2-LINE TO 4-LINE DECODER/DEMULTIPLEXER SCAS782B − SEPTEMBER 2004 – REVISED JANUARY 2008 PARAMETER MEASUREMENT INFORMATION VLOAD RL From Output Under Test CL (see Note A) S1 Open GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 2.7 V 3.3 V ± 0.3 V VI tr/tf 2.7 V 2.7 V ≤2.5 ns ≤2.5 ns VM VLOAD CL RL V∆ 1.5 V 1.5 V 6V 6V 50 pF 50 pF 500 Ω 500 Ω 0.3 V 0.3 V VI Timing Input VM 0V tw tsu VI Input VM VM th VI Data Input VM VM 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VI VM Input VM 0V tPLH VM VM VOL tPHL VM VM 0V Output Waveform 1 S1 at VLOAD (see Note B) tPLH tPLZ VLOAD/2 VM tPZH VOH Output VM tPZL tPHL VOH Output VI Output Control VM VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS Output Waveform 2 S1 at GND (see Note B) VOL + V∆ VOL tPHZ VM VOH − V∆ VOH ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) CLVC139AQPWRG4Q1 ACTIVE TSSOP PW 16 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 LC139AQ SN74LVC139AQPWRQ1 ACTIVE TSSOP PW 16 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 LC139AQ (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of