DS14C89A
www.ti.com
SNLS081C – MAY 1998 – REVISED APRIL 2013
DS14C89A Quad CMOS Receiver
Check for Samples: DS14C89A
FEATURES
DESCRIPTION
•
The DS14C89A, pin-for-pin compatible to the
DS1489A/MC1489A, ia a quad receiver designed to
interface data terminal equipment (DTE) with data
circuit-terminating equipment (DCE). These devices
translate levels conforming to EIA-232E and CCITT
V.28 standards to TTL/CMOS logic levels.
1
2
•
•
•
•
Meets EIA/TIA-232-E and CCITT V.28
Standards
Failsafe - Output High for Open Input
LOW Power Consumption
On Chip Noise Filter
Available in SOIC Package
The device is fabricated in low threshold CMOS metal
gate technology. The device provides very low power
consumption compared to their bipolar equivalents:
900 μA (DS14C89A) versus 26 mA (DS1489A).
The DS14C89A provides on chip noise filtering which
eliminates the need for external response control filter
capacitors. When replacing the DS1489A with the
DS14C89A, the response control filter pins can be
tied high, low, or not connected.
Connection Diagram
Figure 1. See Package Number D, NFF0014A
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated
DS14C89A
SNLS081C – MAY 1998 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings (1) (2)
VCC
+6V
−30V to +30V
Input Voltage
Receiver Output Voltage
(VCC) +0.3V to GND−0.3V
Junction Temperature
+150°C
Continuous Power Dissipation @ +25°C (3)
Lead Temp.
NFF0014A Package
1513 mW
D Package
1063 mW
(Soldering 4 seconds)
+260°C
−65°C to +150°C
Storage Temp. Range
ESD Rating ≥ 1.8 kV, Typically ≥ 2 kV (HMB, 1.5 kΩ, 100 pF)
(1)
(2)
(3)
Absolute Maximum Ratings are those values beyond which the safety of the device cannot be ensured. They are not meant to imply that
the devices should be operated at these limits. The tables of AC Electrical Characteristics specify conditions for device operation.
If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Derate NFF0014A Package 12.1 mW/°C, and D Package 8.5 mW/°C above +25°C.
Recommended Operating Conditions
VCC (GND = 0V)
Operating Free Air Temp. (TA)
2
DS14C89A
Submit Documentation Feedback
Min
Max
Units
+4.5
+5.5
V
0
+75
°C
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS14C89A
DS14C89A
www.ti.com
SNLS081C – MAY 1998 – REVISED APRIL 2013
Electrical Characteristics
Over recommended operating conditions, unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Max
Units
VTH
Input High Threshold
1.3
2.7
V
VTL
Input Low Threshold
0.5
1.9
V
VHY
Typical Input Hysteresis
IIN
Input Current
3.6
8.3
mA
VIN = −25V
−3.6
−8.3
mA
VIN = +3V
0.43
1.0
mA
VIN = −3V
−0.43
−1.0
mA
1.0
VIN = +25V
VCC = +4.5V to +5.5V
VIN = +15V
VCC = 0V (Power-Off)
(1)
2.14
5.0
mA
VIN = −15V
−2.14
−5.0
mA
VIN = +3V
0.43
1.0
mA
−1.0
mA
VIN = −3V
VOH
Output High Voltage
VOL
Output Low Voltage
−0.43
VIN = VTL (min)
IOUT = −3.2 mA
2.8
4.0
V
IOUT = −20μA
3.5
4.7
V
VIN = VTH (max)
IOUT = +3.2 mA
ICC
(1)
Supply Current
V
No Load, VIN = 2.7V or 0.5V
0.15
0.4
V
0.5
900
μA
Under the power-off supply conditions it is assumed that the power supply potential drops to zero (0V) and is replaced by a low
impedance or short circuit to ground.
AC Electrical Characteristics (1)
Over recommended operating conditions, unless otherwise specified, CI = 50 pF
Symbol
Parameter
ConditIons
Min
Typ
Max
Units
3.5
6.5
μs
3.2
6.5
μs
tPLH
Propagation Delay Low to High
Input Pulse Width ≥ 10 μs
tPHL
Propagation Delay High to Low
Input Pulse Width ≥ 10 μs
tSK
Typical Propagation Delay Skew
400
tr
Output Rise TIme
40
300
ns
tf
Output Fall Time
40
300
ns
tnw
Pulse Width assumed to be Noise
1.0
μs
(1)
ns
AC input waveforms for test purposes: tr = tf = 200 ns, VIH = +3V, VL = −3V, f = 20 KHz.
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS14C89A
3
DS14C89A
SNLS081C – MAY 1998 – REVISED APRIL 2013
www.ti.com
Parameter Measurement Information
Figure 2. Receiver Load Circuit
Figure 3. Receiver Switching Waveform (2)
(2)
4
AC input waveforms for test purposes: tr = tf = 200 ns, VIH = +3V, VL = −3V, f = 20 KHz.
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS14C89A
DS14C89A
www.ti.com
SNLS081C – MAY 1998 – REVISED APRIL 2013
TYPICAL APPLICATION INFORMATION
Figure 4. Receiver Block Diagram
Figure 5. EIA-232D Data Transmission
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS14C89A
5
DS14C89A
SNLS081C – MAY 1998 – REVISED APRIL 2013
www.ti.com
REVISION HISTORY
Changes from Revision B (April 2013) to Revision C
•
6
Page
Changed layout of National Data Sheet to TI format ............................................................................................................ 5
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS14C89A
PACKAGE OPTION ADDENDUM
www.ti.com
18-May-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
(3)
Device Marking
Samples
(4/5)
(6)
DS14C89AM/NOPB
ACTIVE
SOIC
D
14
55
RoHS & Green
SN
Level-1-260C-UNLIM
DS14C89AMX/NOPB
ACTIVE
SOIC
D
14
2500
RoHS & Green
SN
Level-1-260C-UNLIM
DS14C89AN/NOPB
ACTIVE
PDIP
N
14
25
RoHS & Green
NIPDAU | SN
Level-1-NA-UNLIM
0 to 70
0 to 70
DS14C89AM
Samples
DS14C89AM
Samples
DS14C89AN
Samples
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“DS14C89AN”相匹配的价格&库存,您可以联系我们找货
免费人工找货