DS90CR285MTDX/NOPB

DS90CR285, DS90CR286 www.ti.com SNLS130C – MARCH 1999 – REVISED MARCH 2013 DS90CR285/DS90CR286 +3.3V Rising Edge Data Strobe LVDS 28-Bit Channel Link-66 MHz Check for Samples: DS90CR285, DS90CR286 FEATURES DESCRIPTION • • The DS90CR285 transmitter converts 28 bits of LVCMOS/LVTTL data into four LVDS (Low Voltage Differential Signaling) data streams. A phase-locked transmit clock is transmitted in parallel with the data streams over a fifth LVDS link. Every cycle of the transmit clock 28 bits of input data are sampled and transmitted. The DS90CR286 receiver converts the LVDS data streams back into 28 bits of LVCMOS/LVTTL data. At a transmit clock frequency of 66 MHz, 28 bits of TTL data are transmitted at a rate of 462 Mbps per LVDS data channel. Using a 66 MHz clock, the data throughput is 1.848 Gbit/s (231 Mbytes/s). 1 2 • • • • • • • • • • • • Single +3.3V Supply Chipset (Tx + Rx) Power Consumption B DS90CR285MTD/NOPB ACTIVE TSSOP DGG 56 34 RoHS & Green SN Level-2-260C-1 YEAR -40 to 85 DS90CR285MTD >B DS90CR285MTDX/NOPB ACTIVE TSSOP DGG 56 1000 RoHS & Green SN Level-2-260C-1 YEAR -40 to 85 DS90CR285MTD >B DS90CR286MTD NRND TSSOP DGG 56 34 Non-RoHS & Green Call TI Level-2-235C-1 YEAR DS90CR286MTD >B DS90CR286MTD/NOPB NRND TSSOP DGG 56 34 RoHS & Green SN Level-2-260C-1 YEAR DS90CR286MTD >B DS90CR286MTDX/NOPB NRND TSSOP DGG 56 1000 RoHS & Green SN Level-2-260C-1 YEAR DS90CR286MTD >B (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of