Advanced
.
Extremely
Low Offset
.
Extremely
Low Change
Temperature.
Low
.
AVD
.
CMRR
.
Single-SupplyOperation
.
Common-Mode
Input
the Negative
Rail
Offset
..5
in Offset
..0.003
.
Input
Voltage.
ICL7652
PRECISION CHOPPER-STABILIZED
OPERATIONAL AMPLIFIER
03343,
OCTOBER
1989
LinCMOSTM
D, JG, OR P PACKAGE
!lV Max
Voltage
(TOP VIEW)
with
!lV/OC Typ
Current.
..30
IN-
pA Max
IN
...120
dB Min
and kSVR
+
VOO-
...110
7
3
6
VOO+
OUT
4
5
C RETURN
AVAILABLE
No Noise
Degradation
Capacitors
Connected
Voltage
Range
with
ICL7652
OPTIONS
PACKAGE
Includes
IvlO
max
SMALL-
AT 25°C
i OUTLINE
External
CERAMIC
(D)
to VDD-
0°C to 70°C
descri p tion
The
CXB
12
dB Min
TA
.
-;-u;
CXA[
I
5 I1V
ICL7652D
I
PLASTIC
DIP
DIP
(JG)
(P)
ICL7652P
ICL7652JG
D package is available taped and reeled. Add "R" suffix to device
type (i.e., ICL7652DR).
is a precision
chopper-stabilized
DISTRIBUTION OF ICl7652
INPUT OFFSET VOl TAG E
operational
amplifier
manufactured
using Texas
Instruments
Advanced
LinCMOSTM
process.
This process, in conjunction
with unique chopperstabilization
circuitry,
produces
an operational
amplifier
whose
performance
matches
or
exceeds that of similar devices available today.
32
28
~
o
Chopper stabilization
techniques
make possible
extremely
high dc precision
by continuously
nulling input offset voltage even with variations in
temperature,
time, common-mode
voltage,
and
supply voltage. Additionally,
low-frequency
noise
voltage is significantly
reduced.
This precision,
coupled with the extremely high input impedance
of the CMOS input stage, makes the ICL7652 an
ideal
choice
for low-Ievel
signal-processing
applications
such as strain
couples, and other transducer
I
24
~
'c
:;)
20
O
~
tU
"E
Q)
16
12
u
..
Q)
Q.
gauges,
thermoamplifiers.
The ICL7652 input common-mode
range includes
the negative
rail, thereby
providing
superior
performance
in either
single-supply
or split-
8
-3
-2
-1
VIO -Input
O
1
2
Offset Voltage -~V
3
supply applications,
even at supply voltages as low as :t1.9 V. The ICL7652 also features fast overload
recovery time.
Two external capacitors
are required to operate the device; however, the on-chip chopper
control circuitry is transparent
to the user .
The device inputs and output are designed to withstand -100-mA
surge currents without sustaining
latchup.
Additionally,
the ICL7652 incorporates
internal ESD protection
circuits that prevent functional
failures at
voltages up to 2000 Vas tested under MIL-STD-883C,
Method 3015; however, care should be exercised
in
handling these devices, as exposure to ESD may result in degradation
of the device parametric performance.
The ICL7652
Advanced
is characterized
LinCMOS is a trademark
for operation
of Texas Instruments
PROOUCTION
OATAdocumentscontain information
currentas of publicationdate. Productsconformto
specifications per the terms of Texas Instruments
standardwarranty. Productionprocessingdoes not
necessarilyincludetesting of all parameters.
from O°C to 70°C.
Incorporated.
Copyright
@ 1989,
Texas
Instruments
Incorporated
1
ICL7652
Advanced LinCMOSTM PRECISION
OPERATIONAL AMPLIFIER
functional
CHOPPER-STABILIZED
block diagram
voo+
I
IN +
-I
I
,
OUT
IN-+A
~--
~
NULL
LC RETURN
2
AQ 9
Q
cxAT
VDD-
98
TCXB
T O VDD-'-y--fOR C RETURN
~
EXTERNA L COMPONENTS
TEXAS ~
INSTRUMENTS
POST OFFICE
BOX 655303 .DALLAS.
TEXAS
75265
~
Advanced
absolute
maximum
ratings
Supplyvoltage,
VDD+
Supply
VDD-
voltage,
over
(see
operating
Note
ICL7652
PRECISION CHOPPER-STABILIZED
OPERATIONAL AMPLIFIER
LinCMOSTM
free-air
temperature
range
(unless
otherwise
noted)
1)
8V
8 V
Differentialinputvoltage(seeNote2)
::t16V
Inputvoltagerange,VI(anyinput)
Input
current,
Output
II (each
current,
Duration
::t8V
input)
::t5 mA
10
::t50
of short-circuit
current
at (or below)
25°C
(see
Note
3)
Continuoustotaldissipation..
See
Operatingfree-airtemperature
Storage
temperature
mA
unlimited
range,TA
Dissipation
RatingTable
0°Cto70°C
range.
65°C
to 150°C
Lead
temperature
1,6
mm
(1/16
inch)
from
case
for
10 seconds:
D or p package.
260°C
Lead
temperature
1,6
mm
(1/16
inch)
from
case
for
60 seconds:
JG
300°C
NOTES:
1. All voltage
2. Differential
3. The output
dissipation
values, except differential voltages, are with respect to the midpoint between VDD+ and VDD- .
voltages are at the noninverting input with respect to the inverting input.
may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
rating is not exceeded.
DISSIPATION
operating
RATING TABLE
TA = 70°C
TA ~ 25°C
POWER RATING
DERATING FACTOR
ABOVE T A = 25°C
D
725 mW
5.8 mW/OC
464 mW
JG
p
1050 mW
8.4 mW/OC
672 mW
1000 mW
8.0 mW/OC
640 mW
PACKAGE
recommended
package.
POWER RATING
conditions
Supply voltage, VOO
Common-mode input voltage, V"..
TEXAS ~
INSTRUMENTS
POST OFFICE
BOX 655303
.DALLAS,
TEXAS 75265
3
ICL7652
Advanced LinCMOSTM PRECISION
OPERATIONAL AMPLIFIER
electrical
characteristics
at specified
CHOPPER-STABILIZED
free-air
PARAMETER
temperature,
VDD :t = :t 5 V (unless
TEST CONDITIONS
TAt
MIN
26°C
VIO
Input
aVIO
Temperature
offset
coefficient
of input offset voltage
I UNIT
5
0.6
=
AS
0
= 50.0.
0.003
0.003
2
26°C
26°C
offset
!lV
7.25
Full range
VIC
118
MAX
TYP
Full range
Input
noted)
voltage
Input offset voltage long-term drift (see Note 4)
110
otherwise
0.05
0.06
30
current
Full range
4
26°C
Input bias current
pA
100
Full range
30
pA
100
-5
VICR
Common-mode
AS
input voltage range
= 50.Q
Full range
v
to
3.1
VOM+
Maximum positive peak output voltage swing
VOM-
Maximum negative peak output voltage swing
AVO
Large-signal
fch
Internal chopping frequency
CMRR
4.8
25°C
RL
=
10
k.Q.
v
Full range
RL
=
-4.9
25°C
10 kQ
v
Full range
differential
voltage amplification
=
10
Full range
rejection ratio
= 0,
VIC = VICR min,
R~ = 50 9
kSVR
Supply-voltage rejection ratio (~VDD :t / ~VIO)
100
Supply current
VDD:t
= :t1.9Vto:tBV,
Vo
= 0,
RR = 50.0.
Vo
=
No load
0
dB
kQ
114
25°C
Vo
Common-mode
150
25°C
RL
VO=:t4V,
25°C
110
Full range
104
25°C
110
Full range
I
25°C-
450
140
Hz
dB
135
dB
104
1.5
2.4
mA
3.5
Full range
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at T A = 150°C extrapolated
to T A = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
operating
characteristics
at specified
free-air
PARAMETER
SA+
SR-
Positive slew rate at unity gain
Negative slew rate at unity gain
Vn
Equivalent input noise voltage (see Note 5)
VN(PP)
Peak-to-peak
L!n-
Equivalent
equivalent
input noise voltage
input noise current
temperature,
TEST CONDITIONS
I f/Jm
product
Phase margin at unity gain
VO=:t2.3V,
RL = 10 k.Q.,
CL = 100 pF
MIN
IA'
otherwise
TYP
2
Full range
1.5
25°C
2.3
Full range
1.8
MAX -r-uNIT
V/I1S
3.1
V/~S
25°C
94
f = 1 kHz
25°C
23
f = 0 to 1 Hz
25°C
0.8
f = Oto10Hz
25°C
2.8
nV/--IRZ
f = 1 kHz
25°C
0.004
I1V
~
RL = 10 kg,
CL = 100 pF
RL = 10 k.Q.,
noted)
2.8
f = 10Hz
tFul1 range is 0°C to 70°C.
NOTE 5: This parameter is tested on a sample basis for the ICL7652.
has no bearing on testing or nontesting of other parameters.
4
= :t 5 V (unless
25°C
f = 10 kHz,
Gain-bandwidth
VDD:t
GL = 10~pF
25°C
1.9
25°C
48°
For other test requirements,
please contact the factory.
MHz
This statement
Advanced
TYPICAL
LinCMOSTM
ICL7652
PRECISION CHOPPER-STABILIZED
OPERATIONAL AMPLIFIER
CHARACTERISTICS
table of graphs
FIGURE
118
Input bias current
Input offset current
~
Maximum peak-to-peak
~
VOM
AVO
100
IOS
SA
output voltage swing
Maximum peak output voltage swing
Differential voltage amplification
Supply current
Short-circuit
output current
Slew rate
Pulse response
Gain-bandwidth
Vn
I/>m
Equivalent
product
input noise voltage
Phase margin
Phase shift
vs
Common-mode
vs
Temperature
2
vs
Temperature
3
vs
Frequency
vs
Output current
5, 6
vs
Temperature
7, 8
9
vs
Frequency
vs
Temperature
10
vs
Supply voltage
11
vs
Temperature
12
vs
Supply voltage
13
vs
Temperature
14
vs
Supply voltage
15
vs
Temperature
16
BOX 655303
1
4
Small-signal
17
Large-signal
vs Supply voltage
18
vs
Temperature
20
vs
Frequency
21
vs
Supply voltage
22
vs
Temperature
23
vs
Load capacitance
24
vs
Frequency
.DALLAS,
~
19
9
5
INSTRUMENTS
POST OFFICE
input voltage
TEXAS 75265
ICL7652
Advanced LinCMOSTM PRECISION
OPERATIONAL AMPLIFIER
CHOPPER-STABILIZED
TYPICAL
CHARACTERISTICSt
I
(1)
01
~
0
>
~
c.
"5
Q.
"5
o
~
10
(1)
11.
E
Q)
t
~
u
-a;
UI
=
o
.9
~
10
(1)
11.
5
Do
~
T A -Free-Air
Temperature
FIGURE
-°C
3
tOata at high and low temperatures are applicable to ICL7652 only within its noted operating free-air temperature range of 0°C to 70°C. The
extended data have been retained to show typical performance of devices selected from the same process but characterized for operation
from -55°C to 125°C.
6
INSTRUMENTS
POST OFFICE
BOX 655303
.DALLAS,
TEXAS
75265
~
Advanced
LinCMOSTM
ICL7652
PRECISION CHOPPER-STABILIZED
OPERATIONAL AMPLIFIER
TYPICAL CHARACTERISTICSt
MAXIMUM
PEAK OUTPUT
OUTPUT
1101-Output
Current
-50
-25
1101-Output
5
VOlTAGE
MAXIMUM
0
25
50
Temperature
FIGURE
Current
-75
-50
-°C
-25
6
VOlTAGE
vs
TEMPERATURE
0
T A -Free-Air
7
-mA
PEAK OUTPUT
FREE-AIR
75
VOlTAGE
vs
CURRENT
FIGURE
vs
TEMPERATURE
T A -Free-Air
PEAK OUTPUT
OUTPUT
-mA
PEAK OUTPUT
FREE-AIR
-75
MAXIMUM
vs
CURRENT
FIGURE
MAXIMUM
VOlTAGE
25
50
Temperature
FIGURE
75
-°C
8
tOata at high and low temperatures are applicable to ICL7652 only within its noted operating free-air temperature range of 0°C to 70°C. The
extended data have been retained to show typical performance of devices selected from the same process but characterized for operation
from -55°C to 125°C.
7
INSTRUMENTS
POST
OFFICE
BOX
655303
.DALLAS,
TEXAS
75265
ICL7652
Advanced LinCMOSTM PRECISION
OPERATIONAL AMPLIFIER
CHOPPER-STABILIZED
TYPICAL
CHARACTERISTICSt
LARGE-SIGNAL DIFFERENTIAL VOL TAG E
AMPLIFICATION and PHASE SHIFT
vs
FREQUENCY
LARGE-SIGNAL
DIFFERENTIAL
VOLTAGE
AMPLIFICATION
vs
FREE-AIR TEMPERATURE
-75
-50
-25
0
T A -Free-Air
25
FIGURE
SUPPl y CURRENT
vs
SUPPlY VOlTAGE
50
Temperature
75
-°C
10
SUPPL y CURRENT
vs
FREE-AIR TEMPERATURE
2
1.6
1.6
«
E
I
E
~
~
u
>
Q.
c.
~
(/)
<
E
I
'E
~
~
c.>
1.2
1.2
:3?:'
c.
c.
0.8
~
U>
I
C
C
0.8
I
C
C
"
0.4
0...
0
0
2
3
4
IVDD:t I -Supply
FIGURE
5
6
Voltage
-V
7
8
-75
-50
-25
0
T A -Free-Air
11
25
50
Temperature
FIGURE
75
100
125
-oC
12
tOata at high and low temperatures are applicable to ICL7652 only within its noted operating free-air temperature range of 0°C to 70°C. The
extended data have been retained to show typical performance of devices selected from the same process but characterized for operation
from -55°C to 125°C.
8
TEXAS ~
INSTRUMENTS
POST OFFICE
BOX 655303
.DALLAS,
TEXAS 75265
Advanced
TYPICAL
LinCMOSTM
ICL7652
PRECISION CHOPPER-STABILIZED
OPERATIONAL AMPLIFIER
CHARACTERISTICSt
SHORT -CIRCUIT OUTPUT CURRENT
vs
SUPPlY VOlTAGE
SHORT -CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
-75
-50
-25
0
T A -Free-Air
25
FIGURE
SLEW
FREE-AIR
50
Temperature
75
-°C
14
RA TE
vs
TEMPERATURE
1/1
:i>
I
Q)
"iV
~
~
Q)
U;
I
~
cn
In
='.
>
I
GI
~
I]:
~
GI
Ui
I
I]:
(/)
-75
IVoo:t I -Supply
FIGURE
-50
Voltage -V
-25
0
T A -Free-Air
15
25
50
Temperature
FIGURE
75
-°C
16
tOata at high and low temperatures are applicable to ICL7652 only within its noted operating free-air temperature range of 0°C to 70°C. The
extended data have been retained to show typical performance of devices selected from the same process but characterized for operation
from -55°C to 125°C.
TEXAS ~
INSTRUMENTS
POST OFFICE
BOX 655303 .DALLAS,
TEXAS
9
75265
ICL7652
Advanced LinCMOSTM PRECISION
OPERATIONAL AMPLIFIER
CHOPPER-STABILIZED
TYPICAL
CHARACTERISTICSt
10
15
t -Time
FIGURE
GAIN-BANDWIDTH
PRODUCT
GAIN-BANDWIDTH
vs
SUPPLY
20
25
30
35
40
-I1s
18
PRODUCT
vs
FREE-AIR
VOLTAGE
TEMPERATURE
2.4
N
:I:
~
I
2.2
"i3
~
"0
O
11:
.c
'6
.~
"0
c
ca
m
c::
'ca
"
1.8
1.6
1.4
1.2 L--75
IVDD:t I -Supply
FIGURE
Voltage
-50
-25
0
T A -Free-Air
-V
25
FIGURE
19
50
Temperature
75
100
125
-°C
20
tOata at high and low temperatures are applicable to ICL7652 only within its noted operating free-air temperature range of 0°C to 70°C. The
extended data have been retained to show typical performance of devices selected from the same process but characterized for operation
from -55°C to 125°C.
10
TEXAS ~
INSTRUMENTS
POST OFFICE
BOX 655303
.DALLAS,
TEXAS
75265
ICl7652
Advanced
linCMOSTM
PRECISION
CHOPPER-STABiliZED
OPERATIONALAMPLIFIER
TYPICAL
EQUIVALENT
CHARACTERISTICSt
INPUT NOISE VOLTAGE
PHASE
vs
FREQUENCY
SUPPLY
100
MARGIN
vs
VOLTAGE
50°
RL = 10kO
~
>
c
I
QJ
C)
~
0
>
QJ
cn
.0
z
5
c.
E.
c
QJ
m
.~
~
C"
w
I
CL = 100 pF
~
80
1;
'51
~
60
TA = 25°C
48°
~
~
Qj
UI
(0
-1:
0.
I
40
46°
44°
E
~
I
20
1111111
VDD:t
42°
= :t5V
AS = 100Q
C
TA = 25°C
>
40°
0
1 k
0
1
2
3
IVDD:!:
PHASE
FREE-AIR
MARGIN
vs
TEMPERATURE
4
6
5
I -Supply
V ~"
FIGURE
22
7
PHASE
LOAD
50°
MARGIN
vs
CAPACITANCE
60°
VDD:t
]
48°
~
= :t5V
RL = 10kQ
50°
T
.=
C)
~
~
Q)
(/)
tU
.c
0.
I
8
v
46°
.~
0)
~
~
Q)
(/)
TA = 25°C
40°
30°
(V
.c
0.
44°
I
E
E
20°
~
42°
VDD:t
=
..t5 V
10°
RL = 10kQ
GL = 100 pF
40°
00
75
50
-25
TA -
125
0
200
CL
400
600
Load Capacitance
FIG
URE
800
1000
-pF
24
11
ICL7652
Advanced LinCMOSTM PRECISION
OPERATIONAL AMPLIFIER
CHOPPER-STABILIZED
TYPICAL
capacitor
selection
APPLICATION
DATA
and placement
The two important factors to consider when selecting external capacitors CXA and CXB are leakage and
dielectric absorption. Both factors can cause system degradation that negate the performance advantages
realized by using the ICL7652.
Degradation from capacitor leakage becomes more apparent with increasing temperatures.
Low-leakage
capacitors and standoffs are recommended for operation at T A = 125°C. In addition, guardbands around the
capacitor connections on both sides of the printed circuit board are recommended to alleviate problems
caused by surface leakage on circuit boards.
Capacitors with high dielectric absorption tend to take several seconds to settle upon application of power,
which directly affects input offset voltage. In applications needing fast settling of input offset voltage, it is
recommended that high-quality film capacitors, such as mylar, polystyrene, or polypropylene, be used. In
other applications, however, a ceramic or other low-grade capacitor may suffice.
Unlike many choppers available today, the ICL7652 is designed to function with values of CXA and CXB in
the range of 0.1 ~F to 1 ~F without degradation to input offset voltage or input noise voltage. These capacitors
should be located as close as possible to the CXA and CXB pins and returned to either the VDD- pin or the
C RETURN pin. Note that on many choppers, connecting these capacitors to the VDD- pin causes
degradation in noise performance, a problem that is eliminated on the ICL7652.
overload
recovery/output
clamp
When large differential input voltage conditions are applied to the ICL7652, the nulling loop attempts to prevent
the output from saturating by driving CXA and CXB to internally-clamped voltage levels. Once the overdrive
condition is removed, a period of time is required to allow the built-up charge to dissipate. This time period
is defined as overload recovery time (see Figure 25). Typical overload recovery time for the ICL7652 is
significantly faster than that of competitive products.
thermoelectric
effects
T o take advantage of the extremely low offset
voltage temperature coefficient of the ICL7652,
care must be taken to compensate for the
thermoelectric effects present when two dissimilar
metals are brought into contact with each other
(such as device leads being soldered to a printed
circuit board). It is not uncommon for dissimilar
metal junctions
to produce
thermoelectric
voltages in the range of several microvolts per
degree Celsius (orders of magnitude greater than
the O.O1-!lV/OC typical of the ICL7652).
To help minimize thermoelectric effects, careful
attention should be paid to component selection
and circuit board layout.
Avoid the use of
nonsoldered
connections
(such as sockets,
relays, switches, etc.) in the input signal path.
Cancel thermoelectric effects by duplicating the
number of components and junctions in each
device input. The use of low-thermoelectriccoefficient components,
such as wire-wound
resistors, is also beneficial.
12
FIGURE
TEXAS ~
INSTRUMENTS
POST OFFICE
BOX 655303 .DALLAS.
TEXAS
75265
25.
OVERLOAD
RECOVERY
Advanced
TYPICAL
avoiding
ICL7652
PRECISION CHOPPER-STABILIZED
OPERATIONAL AMPLIFIER
LinCMOSTM
APPLICATION
DATA
latchup
The ICL7652 inputs and output are designed to withstand -1 OO-mA surge currents without sustaining latchup.
However, because CMOS devices are susceptible to latchup due to their inherent parasitic thyristors,
techniques to reduce the chance of latchup should be used whenever possible. Internal protection diodes
should not be forward biased in normal operation. Applied input and output voltages should not exceed the
supply voltage by more than 300 mV. Care should be exercised when using capacitive coupling on pulse
generators. Supply transients should be shunted by using decoupling capacitors (0.1 ~F typical) located
across the supply rails as close to the device as possible.
The current path established if latchup occurs is usually between the supply rails and is limited only by the
impedance of the power supply and the forward resistance of the parasitic thyristor. The chance of latchup
occurring increases with increasing temperature and supply voltage.
electrostatic
discharge
protection
The ICL7652 incorporates
internal ESD protection
circuits that prevent functional
failures at voltages at or
below 2000 V. Care should be exercised
in handling these devices,
as exposure
to ESD may result in
degradation
theory
of the device
parametric
performance.
of operation
Chopper-stabilized operational amplifiers offer the best dc performance of any monolithic operational amplifier.
This superior performance is the result of using two operational amplifiers -a main amplifier and a nulling
amplifier- plus oscillator-controlled logic and two external capacitors to create a system that behaves as a
single amplifier. With this approach, the ICL7652 achieves submicrovolt input offset voltage, submicrovolt
noise voltage, and offset voltage variations with temperature in the nV/OC range.
The ICL7652 on-chip control logic produces two dominant clock phases -a nulling phase and an amplifying
phase. The term "chopper-stabilized" derives from the process of switching between these two clock phases.
Figure 26 shows a simplified block diagram of the ICL7652. Switches A and B are make-before-break types.
During the nulling phase, switch A is closed, shorting the nulling amplifier inputs together and allowing the
nulling amplifier to reduce its own input offset voltage by feeding its output signal back to an inverting input
node. Simultaneously, external capacitor CXA stores the nulling potential to allow the offset voltage of the
amplifier to remain nulled during the amplifying phase.
During the amplifying phase, switch B is closed,
connecting the output of the nulling amplifier to a
noninverting input of the main amplifier. In this
configuration, the input offset voltage of the main
MAIN
IN +
,
IN -
-;r>-
Vo
B
amplifier is nulled. Also, external capacitor CXB
stores the nulling potential to allow the offset
voltage of the main amplifier to remain nulled
during the next nulling phase.
D
A
"
~
>--
~~
VOO-
1::;("
This continuous chopping process allows offsetvoltage nulling during variations in time and
temperature and over the common-mode input
voltage range and power supply range.
In
NULL
~~
FIGURE 26. SIMPLIFIED
.
BLOCK DIAGRAM
addition, because the low-frequency signal path
is through both the null and main amplifiers,
extremely high gain is achieved.
TEXAS .
INSTRUMENTS
POST OFFICE
BOX 655303
.DALLAS,
TEXAS
13
75265
ICL7652
Advanced
LinCMOSTM PRECISION
OPERATIONAL AMPLIFIER
CHOPPER-STABILIZED
TYPICAL
APPLICA
TION DA T A
The low-frequency noise of a chopper amplifier depends on the magnitude of the component noise prior to
chopping and the capability of the circuit to reduce this noise while chopping. The use of the Advanced
linCMOSTM process, with its low-noise analog MOS transistors and patent-pending input stage design,
significantly reduces the input noise voltage.
The primary source of nonideal operation in chopper-stabilized amplifiers is error charge from the switches.
As charge imbalance accumulates on critical nodes, input offset voltage can increase, especially with
increasing chopping frequency. This problem has been significantly reduced in the ICl7652 by use of a
patent-pending compensation circuit and the Advanced linCMOSTM process.
The ICl7652 incorporates a feed-forward design that ensures continuous frequency response. Essentially,
the gain magnitude of the nulling amplifier and compensation network crosses unity at the break frequency
of the main amplifier. As a result, the high-frequency response of the system is the same as the frequency
response of the main amplifier. This approach also ensures that the slewing characteristics remain the same
during both the nulling and amplifying phases.
temperature
coefficient
of input
offset
voltage
Figure 27 shows the effects of package-induced thermal EMF. The ICL7652 can null only the offset voltage
within its nulling loop. There are metal-to-metal junctions outside the nulling loop (bonding wires, solder joints,
etc.) that produce EMF. In Figure 27, an ICL7652 was placed in an oven at 25°C at t = 0, biased up, and
allowed to stabilize. At t = 3 min, the oven was turned on and allowed to rise in temperature to 125°C. As
evidenced by the curve, the overall change in input offset voltage with temperature is much less than the
specified maximum limit of 0.05 !lV/OC.
0.1 ~F
-1t50kQ
-'\/v'v10
0.1 ~F
~
5Y
1+
-5Y
t
VIO = VO/1000
YO
50 kQ
+
FIGURE 27. EFFECTS OF PACKAGE-INDUCED
14
TEXAS ~
INSTRUMENTS
POST OFFICE
BOX 655303 .DALLAS,
TEXAS 75265
THERMAL
EMF
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
ICL7652P
ACTIVE
PDIP
P
8
50
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
ICL7652P
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of