TE X AS I NS TRUM E NTS - P RO DUCTION D ATA
®
Stellaris LM3S1G58 Microcontroller
D ATA SHE E T
D S -LM 3S 1G58 - 9 9 7 0
C opyri ght © 200 7-2011
Texas Instruments Incorporated
Copyright
Copyright © 2007-2011 Texas Instruments Incorporated All rights reserved. Stellaris and StellarisWare® are registered trademarks of Texas Instruments
Incorporated. ARM and Thumb are registered trademarks and Cortex is a trademark of ARM Limited. Other names and brands may be claimed as the
property of others.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard
warranty. Production processing does not necessarily include testing of all parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor
products and disclaimers thereto appears at the end of this data sheet.
Texas Instruments Incorporated
108 Wild Basin, Suite 350
Austin, TX 78746
http://www.ti.com/stellaris
http://www-k.ext.ti.com/sc/technical-support/product-information-centers.htm
2
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table of Contents
Revision History ............................................................................................................................. 26
About This Document .................................................................................................................... 27
Audience ..............................................................................................................................................
About This Manual ................................................................................................................................
Related Documents ...............................................................................................................................
Documentation Conventions ..................................................................................................................
27
27
27
28
1
Architectural Overview .......................................................................................... 30
1.1
1.1.1
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
1.1.7
1.2
1.3
1.4
Functional Overview ......................................................................................................
ARM Cortex-M3 ............................................................................................................
On-Chip Memory ...........................................................................................................
Serial Communications Peripherals ................................................................................
System Integration ........................................................................................................
Analog ..........................................................................................................................
JTAG and ARM Serial Wire Debug ................................................................................
Packaging and Temperature ..........................................................................................
Target Applications ........................................................................................................
High-Level Block Diagram .............................................................................................
Hardware Details ..........................................................................................................
32
32
34
35
38
43
44
45
45
45
47
2
The Cortex-M3 Processor ...................................................................................... 48
2.1
2.2
2.2.1
2.2.2
2.2.3
2.2.4
2.3
2.3.1
2.3.2
2.3.3
2.3.4
2.3.5
2.3.6
2.4
2.4.1
2.4.2
2.4.3
2.4.4
2.4.5
2.4.6
2.4.7
2.5
2.5.1
2.5.2
2.5.3
2.5.4
Block Diagram .............................................................................................................. 49
Overview ...................................................................................................................... 50
System-Level Interface .................................................................................................. 50
Integrated Configurable Debug ...................................................................................... 50
Trace Port Interface Unit (TPIU) ..................................................................................... 51
Cortex-M3 System Component Details ........................................................................... 51
Programming Model ...................................................................................................... 52
Processor Mode and Privilege Levels for Software Execution ........................................... 52
Stacks .......................................................................................................................... 52
Register Map ................................................................................................................ 53
Register Descriptions .................................................................................................... 54
Exceptions and Interrupts .............................................................................................. 67
Data Types ................................................................................................................... 67
Memory Model .............................................................................................................. 67
Memory Regions, Types and Attributes ........................................................................... 69
Memory System Ordering of Memory Accesses .............................................................. 69
Behavior of Memory Accesses ....................................................................................... 69
Software Ordering of Memory Accesses ......................................................................... 70
Bit-Banding ................................................................................................................... 71
Data Storage ................................................................................................................ 74
Synchronization Primitives ............................................................................................. 74
Exception Model ........................................................................................................... 75
Exception States ........................................................................................................... 76
Exception Types ............................................................................................................ 76
Exception Handlers ....................................................................................................... 79
Vector Table .................................................................................................................. 79
July 25, 2011
3
Texas Instruments-Production Data
Table of Contents
2.5.5
2.5.6
2.5.7
2.6
2.6.1
2.6.2
2.6.3
2.6.4
2.7
2.7.1
2.7.2
2.8
Exception Priorities ....................................................................................................... 80
Interrupt Priority Grouping .............................................................................................. 81
Exception Entry and Return ........................................................................................... 81
Fault Handling .............................................................................................................. 83
Fault Types ................................................................................................................... 83
Fault Escalation and Hard Faults .................................................................................... 84
Fault Status Registers and Fault Address Registers ........................................................ 85
Lockup ......................................................................................................................... 85
Power Management ...................................................................................................... 85
Entering Sleep Modes ................................................................................................... 85
Wake Up from Sleep Mode ............................................................................................ 86
Instruction Set Summary ............................................................................................... 87
3
Cortex-M3 Peripherals ........................................................................................... 90
3.1
3.1.1
3.1.2
3.1.3
3.1.4
3.2
3.3
3.4
3.5
3.6
Functional Description ................................................................................................... 90
System Timer (SysTick) ................................................................................................. 90
Nested Vectored Interrupt Controller (NVIC) .................................................................... 91
System Control Block (SCB) .......................................................................................... 93
Memory Protection Unit (MPU) ....................................................................................... 93
Register Map ................................................................................................................ 98
System Timer (SysTick) Register Descriptions .............................................................. 100
NVIC Register Descriptions .......................................................................................... 104
System Control Block (SCB) Register Descriptions ........................................................ 117
Memory Protection Unit (MPU) Register Descriptions .................................................... 146
4
JTAG Interface ...................................................................................................... 156
4.1
4.2
4.3
4.3.1
4.3.2
4.3.3
4.3.4
4.4
4.5
4.5.1
4.5.2
Block Diagram ............................................................................................................
Signal Description .......................................................................................................
Functional Description .................................................................................................
JTAG Interface Pins .....................................................................................................
JTAG TAP Controller ...................................................................................................
Shift Registers ............................................................................................................
Operational Considerations ..........................................................................................
Initialization and Configuration .....................................................................................
Register Descriptions ..................................................................................................
Instruction Register (IR) ...............................................................................................
Data Registers ............................................................................................................
157
157
158
158
160
160
161
163
164
164
166
5
System Control ..................................................................................................... 168
5.1
5.2
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.3
5.4
5.5
Signal Description .......................................................................................................
Functional Description .................................................................................................
Device Identification ....................................................................................................
Reset Control ..............................................................................................................
Non-Maskable Interrupt ...............................................................................................
Power Control .............................................................................................................
Clock Control ..............................................................................................................
System Control ...........................................................................................................
Initialization and Configuration .....................................................................................
Register Map ..............................................................................................................
Register Descriptions ..................................................................................................
4
168
169
169
169
174
175
175
182
184
184
186
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
6
Hibernation Module .............................................................................................. 263
6.1
6.2
6.3
6.3.1
6.3.2
6.3.3
6.3.4
6.3.5
6.3.6
6.3.7
6.3.8
6.3.9
6.4
6.4.1
6.4.2
6.4.3
6.4.4
6.4.5
6.4.6
6.5
6.6
Block Diagram ............................................................................................................
Signal Description .......................................................................................................
Functional Description .................................................................................................
Register Access Timing ...............................................................................................
Hibernation Clock Source ............................................................................................
Battery Management ...................................................................................................
Real-Time Clock ..........................................................................................................
Non-Volatile Memory ...................................................................................................
Power Control Using HIB .............................................................................................
Power Control Using VDD3ON Mode ...........................................................................
Initiating Hibernate ......................................................................................................
Interrupts and Status ...................................................................................................
Initialization and Configuration .....................................................................................
Initialization .................................................................................................................
RTC Match Functionality (No Hibernation) ....................................................................
RTC Match/Wake-Up from Hibernation .........................................................................
External Wake-Up from Hibernation ..............................................................................
RTC or External Wake-Up from Hibernation ..................................................................
Register Reset ............................................................................................................
Register Map ..............................................................................................................
Register Descriptions ..................................................................................................
264
264
265
265
266
268
268
268
269
269
269
269
270
270
271
271
271
272
272
272
273
7
Internal Memory ................................................................................................... 290
7.1
7.2
7.2.1
7.2.2
7.2.3
7.3
7.4
7.5
Block Diagram ............................................................................................................ 290
Functional Description ................................................................................................. 290
SRAM ........................................................................................................................ 291
ROM .......................................................................................................................... 291
Flash Memory ............................................................................................................. 293
Register Map .............................................................................................................. 298
Flash Memory Register Descriptions (Flash Control Offset) ............................................ 299
Memory Register Descriptions (System Control Offset) .................................................. 311
8
Micro Direct Memory Access (μDMA) ................................................................ 335
8.1
8.2
8.2.1
8.2.2
8.2.3
8.2.4
8.2.5
8.2.6
8.2.7
8.2.8
8.2.9
8.2.10
8.3
8.3.1
8.3.2
8.3.3
Block Diagram ............................................................................................................ 336
Functional Description ................................................................................................. 336
Channel Assignments .................................................................................................. 337
Priority ........................................................................................................................ 338
Arbitration Size ............................................................................................................ 338
Request Types ............................................................................................................ 338
Channel Configuration ................................................................................................. 339
Transfer Modes ........................................................................................................... 341
Transfer Size and Increment ........................................................................................ 349
Peripheral Interface ..................................................................................................... 349
Software Request ........................................................................................................ 349
Interrupts and Errors .................................................................................................... 350
Initialization and Configuration ..................................................................................... 350
Module Initialization ..................................................................................................... 350
Configuring a Memory-to-Memory Transfer ................................................................... 351
Configuring a Peripheral for Simple Transmit ................................................................ 352
July 25, 2011
5
Texas Instruments-Production Data
Table of Contents
8.3.4
8.3.5
8.4
8.5
8.6
Configuring a Peripheral for Ping-Pong Receive ............................................................
Configuring Channel Assignments ................................................................................
Register Map ..............................................................................................................
μDMA Channel Control Structure .................................................................................
μDMA Register Descriptions ........................................................................................
354
356
356
358
365
9
General-Purpose Input/Outputs (GPIOs) ........................................................... 395
9.1
9.2
9.2.1
9.2.2
9.2.3
9.2.4
9.2.5
9.2.6
9.3
9.4
9.5
Signal Description ....................................................................................................... 395
Functional Description ................................................................................................. 399
Data Control ............................................................................................................... 401
Interrupt Control .......................................................................................................... 402
Mode Control .............................................................................................................. 403
Commit Control ........................................................................................................... 403
Pad Control ................................................................................................................. 404
Identification ............................................................................................................... 404
Initialization and Configuration ..................................................................................... 404
Register Map .............................................................................................................. 405
Register Descriptions .................................................................................................. 407
10
General-Purpose Timers ...................................................................................... 449
10.1
10.2
10.3
10.3.1
10.3.2
10.3.3
10.3.4
10.4
10.4.1
10.4.2
10.4.3
10.4.4
10.4.5
10.5
10.6
Block Diagram ............................................................................................................
Signal Description .......................................................................................................
Functional Description .................................................................................................
GPTM Reset Conditions ..............................................................................................
Timer Modes ...............................................................................................................
DMA Operation ...........................................................................................................
Accessing Concatenated Register Values .....................................................................
Initialization and Configuration .....................................................................................
One-Shot/Periodic Timer Mode ....................................................................................
Real-Time Clock (RTC) Mode ......................................................................................
Input Edge-Count Mode ...............................................................................................
Input Edge Timing Mode ..............................................................................................
PWM Mode .................................................................................................................
Register Map ..............................................................................................................
Register Descriptions ..................................................................................................
449
450
453
454
454
459
460
460
460
461
461
462
462
463
464
11
Watchdog Timers ................................................................................................. 495
11.1
11.2
11.2.1
11.3
11.4
11.5
Block Diagram ............................................................................................................
Functional Description .................................................................................................
Register Access Timing ...............................................................................................
Initialization and Configuration .....................................................................................
Register Map ..............................................................................................................
Register Descriptions ..................................................................................................
496
496
497
497
497
498
12
Analog-to-Digital Converter (ADC) ..................................................................... 520
12.1
12.2
12.3
12.3.1
12.3.2
12.3.3
Block Diagram ............................................................................................................ 521
Signal Description ....................................................................................................... 522
Functional Description ................................................................................................. 523
Sample Sequencers .................................................................................................... 523
Module Control ............................................................................................................ 524
Hardware Sample Averaging Circuit ............................................................................. 527
6
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
12.3.4
12.3.5
12.3.6
12.3.7
12.4
12.4.1
12.4.2
12.5
12.6
Analog-to-Digital Converter ..........................................................................................
Differential Sampling ...................................................................................................
Internal Temperature Sensor ........................................................................................
Digital Comparator Unit ...............................................................................................
Initialization and Configuration .....................................................................................
Module Initialization .....................................................................................................
Sample Sequencer Configuration .................................................................................
Register Map ..............................................................................................................
Register Descriptions ..................................................................................................
13
Universal Asynchronous Receivers/Transmitters (UARTs) ............................. 598
13.1
Block Diagram ............................................................................................................
13.2
Signal Description .......................................................................................................
13.3
Functional Description .................................................................................................
13.3.1 Transmit/Receive Logic ...............................................................................................
13.3.2 Baud-Rate Generation .................................................................................................
13.3.3 Data Transmission ......................................................................................................
13.3.4 Serial IR (SIR) .............................................................................................................
13.3.5 ISO 7816 Support .......................................................................................................
13.3.6 Modem Handshake Support .........................................................................................
13.3.7 LIN Support ................................................................................................................
13.3.8 FIFO Operation ...........................................................................................................
13.3.9 Interrupts ....................................................................................................................
13.3.10 Loopback Operation ....................................................................................................
13.3.11 DMA Operation ...........................................................................................................
13.4
Initialization and Configuration .....................................................................................
13.5
Register Map ..............................................................................................................
13.6
Register Descriptions ..................................................................................................
528
531
533
534
538
538
539
539
541
599
599
601
601
601
602
603
604
604
605
607
607
608
608
608
610
611
14
Synchronous Serial Interface (SSI) .................................................................... 659
14.1
14.2
14.3
14.3.1
14.3.2
14.3.3
14.3.4
14.3.5
14.4
14.5
14.6
Block Diagram ............................................................................................................
Signal Description .......................................................................................................
Functional Description .................................................................................................
Bit Rate Generation .....................................................................................................
FIFO Operation ...........................................................................................................
Interrupts ....................................................................................................................
Frame Formats ...........................................................................................................
DMA Operation ...........................................................................................................
Initialization and Configuration .....................................................................................
Register Map ..............................................................................................................
Register Descriptions ..................................................................................................
15
Inter-Integrated Circuit (I2C) Interface ................................................................ 701
15.1
15.2
15.3
15.3.1
15.3.2
15.3.3
15.3.4
15.3.5
Block Diagram ............................................................................................................
Signal Description .......................................................................................................
Functional Description .................................................................................................
I2C Bus Functional Overview ........................................................................................
Available Speed Modes ...............................................................................................
Interrupts ....................................................................................................................
Loopback Operation ....................................................................................................
Command Sequence Flow Charts ................................................................................
July 25, 2011
660
660
661
662
662
662
663
670
671
672
673
702
702
703
703
705
706
707
708
7
Texas Instruments-Production Data
Table of Contents
15.4
15.5
15.6
15.7
Initialization and Configuration .....................................................................................
Register Map ..............................................................................................................
Register Descriptions (I2C Master) ...............................................................................
Register Descriptions (I2C Slave) .................................................................................
715
716
717
729
16
Pin Diagram .......................................................................................................... 738
17
Signal Tables ........................................................................................................ 740
17.1
17.2
17.3
100-Pin LQFP Package Pin Tables ............................................................................... 741
108-Ball BGA Package Pin Tables ................................................................................ 761
Connections for Unused Signals ................................................................................... 782
18
Operating Characteristics ................................................................................... 784
19
Electrical Characteristics .................................................................................... 785
19.1
Maximum Ratings ....................................................................................................... 785
19.2
Recommended Operating Conditions ........................................................................... 785
19.3
Load Conditions .......................................................................................................... 786
19.4
JTAG and Boundary Scan ............................................................................................ 786
19.5
Power and Brown-out .................................................................................................. 788
19.6
Reset ......................................................................................................................... 789
19.7
On-Chip Low Drop-Out (LDO) Regulator ....................................................................... 790
19.8
Clocks ........................................................................................................................ 790
19.8.1 PLL Specifications ....................................................................................................... 790
19.8.2 PIOSC Specifications .................................................................................................. 791
19.8.3 Internal 30-kHz Oscillator Specifications ....................................................................... 791
19.8.4 Hibernation Clock Source Specifications ....................................................................... 791
19.8.5 Main Oscillator Specifications ....................................................................................... 792
19.8.6 System Clock Specification with ADC Operation ............................................................ 793
19.9
Sleep Modes ............................................................................................................... 793
19.10 Hibernation Module ..................................................................................................... 793
19.11 Flash Memory ............................................................................................................ 795
19.12 GPIO Module .............................................................................................................. 795
19.13 Analog-to-Digital Converter (ADC) ................................................................................ 796
19.14 Synchronous Serial Interface (SSI) ............................................................................... 797
19.15 Inter-Integrated Circuit (I2C) Interface ........................................................................... 799
19.16 Ethernet Controller ...................................................................................................... 800
19.17 Current Consumption .................................................................................................. 801
19.17.1 Nominal Power Consumption ....................................................................................... 801
19.17.2 Maximum Current Consumption ................................................................................... 802
A
Register Quick Reference ................................................................................... 804
B
Ordering and Contact Information ..................................................................... 829
B.1
B.2
B.3
B.4
Ordering Information .................................................................................................... 829
Part Markings .............................................................................................................. 829
Kits ............................................................................................................................. 830
Support Information ..................................................................................................... 830
C
Package Information ............................................................................................ 831
C.1
C.1.1
C.1.2
100-Pin LQFP Package ............................................................................................... 831
Package Dimensions ................................................................................................... 831
Tray Dimensions ......................................................................................................... 833
8
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
C.1.3
C.2
C.2.1
C.2.2
C.2.3
Tape and Reel Dimensions ..........................................................................................
108-Ball BGA Package ................................................................................................
Package Dimensions ...................................................................................................
Tray Dimensions .........................................................................................................
Tape and Reel Dimensions ..........................................................................................
July 25, 2011
833
835
835
837
838
9
Texas Instruments-Production Data
Table of Contents
List of Figures
Figure 1-1.
Figure 2-1.
Figure 2-2.
Figure 2-3.
Figure 2-4.
Figure 2-5.
Figure 2-6.
Figure 2-7.
Figure 3-1.
Figure 4-1.
Figure 4-2.
Figure 4-3.
Figure 4-4.
Figure 4-5.
Figure 5-1.
Figure 5-2.
Figure 5-3.
Figure 5-4.
Figure 5-5.
Figure 6-1.
Figure 6-2.
Figure 6-3.
Figure 7-1.
Figure 8-1.
Figure 8-2.
Figure 8-3.
Figure 8-4.
Figure 8-5.
Figure 8-6.
Figure 9-1.
Figure 9-2.
Figure 9-3.
Figure 9-4.
Figure 10-1.
Figure 10-2.
Figure 10-3.
Figure 10-4.
Figure 10-5.
Figure 11-1.
Figure 12-1.
Figure 12-2.
Figure 12-3.
Figure 12-4.
Figure 12-5.
Figure 12-6.
Stellaris LM3S1G58 Microcontroller High-Level Block Diagram .............................. 46
CPU Block Diagram ............................................................................................. 50
TPIU Block Diagram ............................................................................................ 51
Cortex-M3 Register Set ........................................................................................ 53
Bit-Band Mapping ................................................................................................ 73
Data Storage ....................................................................................................... 74
Vector Table ........................................................................................................ 80
Exception Stack Frame ........................................................................................ 82
SRD Use Example ............................................................................................... 96
JTAG Module Block Diagram .............................................................................. 157
Test Access Port State Machine ......................................................................... 160
IDCODE Register Format ................................................................................... 166
BYPASS Register Format ................................................................................... 166
Boundary Scan Register Format ......................................................................... 167
Basic RST Configuration .................................................................................... 171
External Circuitry to Extend Power-On Reset ....................................................... 172
Reset Circuit Controlled by Switch ...................................................................... 172
Power Architecture ............................................................................................ 175
Main Clock Tree ................................................................................................ 178
Hibernation Module Block Diagram ..................................................................... 264
Using a Crystal as the Hibernation Clock Source ................................................. 267
Using a Dedicated Oscillator as the Hibernation Clock Source with VDD3ON
Mode ................................................................................................................ 267
Internal Memory Block Diagram .......................................................................... 290
μDMA Block Diagram ......................................................................................... 336
Example of Ping-Pong μDMA Transaction ........................................................... 342
Memory Scatter-Gather, Setup and Configuration ................................................ 344
Memory Scatter-Gather, μDMA Copy Sequence .................................................. 345
Peripheral Scatter-Gather, Setup and Configuration ............................................. 347
Peripheral Scatter-Gather, μDMA Copy Sequence ............................................... 348
Digital I/O Pads ................................................................................................. 400
Analog/Digital I/O Pads ...................................................................................... 401
GPIODATA Write Example ................................................................................. 402
GPIODATA Read Example ................................................................................. 402
GPTM Module Block Diagram ............................................................................ 450
Timer Daisy Chain ............................................................................................. 456
Input Edge-Count Mode Example ....................................................................... 457
16-Bit Input Edge-Time Mode Example ............................................................... 458
16-Bit PWM Mode Example ................................................................................ 459
WDT Module Block Diagram .............................................................................. 496
Implementation of Two ADC Blocks .................................................................... 521
ADC Module Block Diagram ............................................................................... 521
ADC Sample Phases ......................................................................................... 526
Doubling the ADC Sample Rate .......................................................................... 526
Skewed Sampling .............................................................................................. 527
Sample Averaging Example ............................................................................... 528
10
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 12-7.
Figure 12-8.
Figure 12-9.
Figure 12-10.
Figure 12-11.
Figure 12-12.
Figure 12-13.
Figure 12-14.
Figure 12-15.
Figure 12-16.
Figure 13-1.
Figure 13-2.
Figure 13-3.
Figure 13-4.
Figure 13-5.
Figure 14-1.
Figure 14-2.
Figure 14-3.
Figure 14-4.
Figure 14-5.
Figure 14-6.
Figure 14-7.
Figure 14-8.
Figure 14-9.
Figure 14-10.
Figure 14-11.
Figure 14-12.
Figure 15-1.
Figure 15-2.
Figure 15-3.
Figure 15-4.
Figure 15-5.
Figure 15-6.
Figure 15-7.
Figure 15-8.
Figure 15-9.
Figure 15-10.
Figure 15-11.
Internal Voltage Conversion Result ..................................................................... 529
External Voltage Conversion Result with 3.0-V Setting ......................................... 530
External Voltage Conversion Result with 1.0-V Setting ......................................... 530
Differential Sampling Range, VIN_ODD = 1.5 V ...................................................... 532
Differential Sampling Range, VIN_ODD = 0.75 V .................................................... 532
Differential Sampling Range, VIN_ODD = 2.25 V .................................................... 533
Internal Temperature Sensor Characteristic ......................................................... 534
Low-Band Operation (CIC=0x0) .......................................................................... 536
Mid-Band Operation (CIC=0x1) .......................................................................... 537
High-Band Operation (CIC=0x3) ......................................................................... 538
UART Module Block Diagram ............................................................................. 599
UART Character Frame ..................................................................................... 601
IrDA Data Modulation ......................................................................................... 603
LIN Message ..................................................................................................... 606
LIN Synchronization Field ................................................................................... 607
SSI Module Block Diagram ................................................................................. 660
TI Synchronous Serial Frame Format (Single Transfer) ........................................ 664
TI Synchronous Serial Frame Format (Continuous Transfer) ................................ 664
Freescale SPI Format (Single Transfer) with SPO=0 and SPH=0 .......................... 665
Freescale SPI Format (Continuous Transfer) with SPO=0 and SPH=0 .................. 665
Freescale SPI Frame Format with SPO=0 and SPH=1 ......................................... 666
Freescale SPI Frame Format (Single Transfer) with SPO=1 and SPH=0 ............... 667
Freescale SPI Frame Format (Continuous Transfer) with SPO=1 and SPH=0 ........ 667
Freescale SPI Frame Format with SPO=1 and SPH=1 ......................................... 668
MICROWIRE Frame Format (Single Frame) ........................................................ 669
MICROWIRE Frame Format (Continuous Transfer) ............................................. 670
MICROWIRE Frame Format, SSIFss Input Setup and Hold Requirements ............ 670
I2C Block Diagram ............................................................................................. 702
I2C Bus Configuration ........................................................................................ 703
START and STOP Conditions ............................................................................. 704
Complete Data Transfer with a 7-Bit Address ....................................................... 704
R/S Bit in First Byte ............................................................................................ 705
Data Validity During Bit Transfer on the I2C Bus ................................................... 705
Master Single TRANSMIT .................................................................................. 709
Master Single RECEIVE ..................................................................................... 710
Master TRANSMIT with Repeated START ........................................................... 711
Master RECEIVE with Repeated START ............................................................. 712
Master RECEIVE with Repeated START after TRANSMIT with Repeated
START .............................................................................................................. 713
Figure 15-12. Master TRANSMIT with Repeated START after RECEIVE with Repeated
START .............................................................................................................. 714
Figure 15-13. Slave Command Sequence ................................................................................ 715
Figure 16-1. 100-Pin LQFP Package Pin Diagram .................................................................. 738
Figure 16-2. 108-Ball BGA Package Pin Diagram (Top View) ................................................... 739
Figure 19-1. Load Conditions ................................................................................................ 786
Figure 19-2. JTAG Test Clock Input Timing ............................................................................. 787
Figure 19-3. JTAG Test Access Port (TAP) Timing .................................................................. 787
Figure 19-4. Power-On Reset Timing ..................................................................................... 788
July 25, 2011
11
Texas Instruments-Production Data
Table of Contents
Figure 19-5.
Figure 19-6.
Figure 19-7.
Figure 19-8.
Figure 19-9.
Figure 19-10.
Figure 19-11.
Figure 19-12.
Figure 19-13.
Figure 19-14.
Brown-Out Reset Timing .................................................................................... 788
Power-On Reset and Voltage Parameters ........................................................... 789
External Reset Timing (RST) .............................................................................. 789
Software Reset Timing ....................................................................................... 789
Watchdog Reset Timing ..................................................................................... 790
MOSC Failure Reset Timing ............................................................................... 790
Hibernation Module Timing with Internal Oscillator Running in Hibernation ............ 794
Hibernation Module Timing with Internal Oscillator Stopped in Hibernation ............ 794
ADC Input Equivalency Diagram ......................................................................... 797
SSI Timing for TI Frame Format (FRF=01), Single Transfer Timing
Measurement .................................................................................................... 798
Figure 19-15. SSI Timing for MICROWIRE Frame Format (FRF=10), Single Transfer ................. 798
Figure 19-16. SSI Timing for SPI Frame Format (FRF=00), with SPH=1 ..................................... 799
Figure 19-17. I2C Timing ......................................................................................................... 800
Figure C-1. 100-Pin LQFP Package Dimensions ................................................................... 831
Figure C-2. 100-Pin LQFP Tray Dimensions .......................................................................... 833
Figure C-3. 100-Pin LQFP Tape and Reel Dimensions ........................................................... 834
Figure C-4. 108-Ball BGA Package Dimensions .................................................................... 835
Figure C-5. 108-Ball BGA Tray Dimensions ........................................................................... 837
Figure C-6. 108-Ball BGA Tape and Reel Dimensions ............................................................ 838
12
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
List of Tables
Table 1.
Table 2.
Table 2-1.
Table 2-2.
Table 2-3.
Table 2-4.
Table 2-5.
Table 2-6.
Table 2-7.
Table 2-8.
Table 2-9.
Table 2-10.
Table 2-11.
Table 2-12.
Table 2-13.
Table 3-1.
Table 3-2.
Table 3-3.
Table 3-4.
Table 3-5.
Table 3-6.
Table 3-7.
Table 3-8.
Table 3-9.
Table 4-1.
Table 4-2.
Table 4-3.
Table 4-4.
Table 5-1.
Table 5-2.
Table 5-3.
Table 5-4.
Table 5-5.
Table 5-6.
Table 5-7.
Table 5-8.
Table 5-9.
Table 6-1.
Table 6-2.
Table 6-3.
Table 6-4.
Table 7-1.
Table 7-2.
Table 7-3.
Table 8-1.
Table 8-2.
Revision History .................................................................................................. 26
Documentation Conventions ................................................................................ 28
Summary of Processor Mode, Privilege Level, and Stack Use ................................ 53
Processor Register Map ....................................................................................... 54
PSR Register Combinations ................................................................................. 59
Memory Map ....................................................................................................... 67
Memory Access Behavior ..................................................................................... 70
SRAM Memory Bit-Banding Regions .................................................................... 72
Peripheral Memory Bit-Banding Regions ............................................................... 72
Exception Types .................................................................................................. 77
Interrupts ............................................................................................................ 78
Exception Return Behavior ................................................................................... 83
Faults ................................................................................................................. 83
Fault Status and Fault Address Registers .............................................................. 85
Cortex-M3 Instruction Summary ........................................................................... 87
Core Peripheral Register Regions ......................................................................... 90
Memory Attributes Summary ................................................................................ 93
TEX, S, C, and B Bit Field Encoding ..................................................................... 96
Cache Policy for Memory Attribute Encoding ......................................................... 97
AP Bit Field Encoding .......................................................................................... 97
Memory Region Attributes for Stellaris Microcontrollers .......................................... 97
Peripherals Register Map ..................................................................................... 98
Interrupt Priority Levels ...................................................................................... 125
Example SIZE Field Values ................................................................................ 153
Signals for JTAG_SWD_SWO (100LQFP) ........................................................... 157
Signals for JTAG_SWD_SWO (108BGA) ............................................................ 158
JTAG Port Pins State after Power-On Reset or RST assertion .............................. 159
JTAG Instruction Register Commands ................................................................. 164
Signals for System Control & Clocks (100LQFP) .................................................. 168
Signals for System Control & Clocks (108BGA) ................................................... 168
Reset Sources ................................................................................................... 169
Clock Source Options ........................................................................................ 176
Possible System Clock Frequencies Using the SYSDIV Field ............................... 179
Examples of Possible System Clock Frequencies Using the SYSDIV2 Field .......... 179
Examples of Possible System Clock Frequencies with DIV400=1 ......................... 180
System Control Register Map ............................................................................. 185
RCC2 Fields that Override RCC Fields ............................................................... 205
Signals for Hibernate (100LQFP) ........................................................................ 264
Signals for Hibernate (108BGA) .......................................................................... 265
Hibernation Module Clock Operation ................................................................... 270
Hibernation Module Register Map ....................................................................... 273
Flash Memory Protection Policy Combinations .................................................... 294
User-Programmable Flash Memory Resident Registers ....................................... 297
Flash Register Map ............................................................................................ 298
μDMA Channel Assignments .............................................................................. 337
Request Type Support ....................................................................................... 339
July 25, 2011
13
Texas Instruments-Production Data
Table of Contents
Table 8-3.
Table 8-4.
Table 8-5.
Table 8-6.
Table 8-7.
Table 8-8.
Table 8-9.
Table 8-10.
Table 8-11.
Table 8-12.
Table 8-13.
Table 9-1.
Table 9-2.
Table 9-3.
Table 9-4.
Table 9-5.
Table 9-6.
Table 9-7.
Table 9-8.
Table 9-9.
Table 9-10.
Table 9-11.
Table 9-12.
Table 10-1.
Table 10-2.
Table 10-3.
Table 10-4.
Table 10-5.
Table 10-6.
Table 11-1.
Table 12-1.
Table 12-2.
Table 12-3.
Table 12-4.
Table 12-5.
Table 13-1.
Table 13-2.
Table 13-3.
Table 13-4.
Table 14-1.
Table 14-2.
Table 14-3.
Table 15-1.
Table 15-2.
Table 15-3.
Table 15-4.
Table 15-5.
Control Structure Memory Map ........................................................................... 340
Channel Control Structure .................................................................................. 340
μDMA Read Example: 8-Bit Peripheral ................................................................ 349
μDMA Interrupt Assignments .............................................................................. 350
Channel Control Structure Offsets for Channel 30 ................................................ 351
Channel Control Word Configuration for Memory Transfer Example ...................... 351
Channel Control Structure Offsets for Channel 7 .................................................. 352
Channel Control Word Configuration for Peripheral Transmit Example .................. 353
Primary and Alternate Channel Control Structure Offsets for Channel 8 ................. 354
Channel Control Word Configuration for Peripheral Ping-Pong Receive
Example ............................................................................................................ 355
μDMA Register Map .......................................................................................... 357
GPIO Pins With Non-Zero Reset Values .............................................................. 396
GPIO Pins and Alternate Functions (100LQFP) ................................................... 396
GPIO Pins and Alternate Functions (108BGA) ..................................................... 398
GPIO Pad Configuration Examples ..................................................................... 404
GPIO Interrupt Configuration Example ................................................................ 405
GPIO Pins With Non-Zero Reset Values .............................................................. 406
GPIO Register Map ........................................................................................... 406
GPIO Pins With Non-Zero Reset Values .............................................................. 418
GPIO Pins With Non-Zero Reset Values .............................................................. 424
GPIO Pins With Non-Zero Reset Values .............................................................. 426
GPIO Pins With Non-Zero Reset Values .............................................................. 429
GPIO Pins With Non-Zero Reset Values .............................................................. 435
Available CCP Pins ............................................................................................ 450
Signals for General-Purpose Timers (100LQFP) .................................................. 451
Signals for General-Purpose Timers (108BGA) .................................................... 452
General-Purpose Timer Capabilities .................................................................... 453
16-Bit Timer With Prescaler Configurations ......................................................... 455
Timers Register Map .......................................................................................... 463
Watchdog Timers Register Map .......................................................................... 498
Signals for ADC (100LQFP) ............................................................................... 522
Signals for ADC (108BGA) ................................................................................. 522
Samples and FIFO Depth of Sequencers ............................................................ 523
Differential Sampling Pairs ................................................................................. 531
ADC Register Map ............................................................................................. 539
Signals for UART (100LQFP) ............................................................................. 600
Signals for UART (108BGA) ............................................................................... 600
Flow Control Mode ............................................................................................. 605
UART Register Map ........................................................................................... 610
Signals for SSI (100LQFP) ................................................................................. 661
Signals for SSI (108BGA) ................................................................................... 661
SSI Register Map .............................................................................................. 672
Signals for I2C (100LQFP) ................................................................................. 702
Signals for I2C (108BGA) ................................................................................... 702
Examples of I2C Master Timer Period versus Speed Mode ................................... 706
Inter-Integrated Circuit (I2C) Interface Register Map ............................................. 716
Write Field Decoding for I2CMCS[3:0] Field ......................................................... 721
14
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-1.
Table 17-2.
Table 17-3.
Table 17-4.
Table 17-5.
Table 17-6.
Table 17-7.
Table 17-8.
Table 17-9.
Table 17-10.
Table 17-11.
Table 17-12.
Table 17-13.
Table 18-1.
Table 18-2.
Table 18-3.
Table 19-1.
Table 19-2.
Table 19-3.
Table 19-4.
Table 19-5.
Table 19-6.
Table 19-7.
Table 19-8.
Table 19-9.
Table 19-10.
Table 19-11.
Table 19-12.
Table 19-13.
Table 19-14.
Table 19-15.
Table 19-16.
Table 19-17.
Table 19-18.
Table 19-19.
Table 19-20.
Table 19-21.
Table 19-22.
Table 19-23.
Table 19-24.
Table 19-25.
Table 19-26.
Table 19-27.
Table 19-28.
Table 19-29.
Table 19-30.
Table 19-31.
Table 19-32.
GPIO Pins With Default Alternate Functions ........................................................ 740
Signals by Pin Number ....................................................................................... 741
Signals by Signal Name ..................................................................................... 747
Signals by Function, Except for GPIO ................................................................. 753
GPIO Pins and Alternate Functions ..................................................................... 757
Possible Pin Assignments for Alternate Functions ................................................ 760
Signals by Pin Number ....................................................................................... 761
Signals by Signal Name ..................................................................................... 768
Signals by Function, Except for GPIO ................................................................. 774
GPIO Pins and Alternate Functions ..................................................................... 778
Possible Pin Assignments for Alternate Functions ................................................ 781
Connections for Unused Signals (100-Pin LQFP) ................................................. 782
Connections for Unused Signals (108-Ball BGA) .................................................. 783
Temperature Characteristics ............................................................................... 784
Thermal Characteristics ..................................................................................... 784
ESD Absolute Maximum Ratings ........................................................................ 784
Maximum Ratings .............................................................................................. 785
Recommended DC Operating Conditions ............................................................ 785
JTAG Characteristics ......................................................................................... 786
Power Characteristics ........................................................................................ 788
Reset Characteristics ......................................................................................... 789
LDO Regulator Characteristics ........................................................................... 790
Phase Locked Loop (PLL) Characteristics ........................................................... 790
Actual PLL Frequency ........................................................................................ 791
PIOSC Clock Characteristics .............................................................................. 791
30-kHz Clock Characteristics .............................................................................. 791
Hibernation Clock Characteristics ....................................................................... 791
HIB Oscillator Input Characteristics ..................................................................... 792
Main Oscillator Clock Characteristics .................................................................. 792
Supported MOSC Crystal Frequencies ................................................................ 792
System Clock Characteristics with ADC Operation ............................................... 793
Sleep Modes AC Characteristics ......................................................................... 793
Hibernation Module Battery Characteristics ......................................................... 793
Hibernation Module AC Characteristics ............................................................... 794
Flash Memory Characteristics ............................................................................ 795
GPIO Module Characteristics ............................................................................. 795
ADC Characteristics ........................................................................................... 796
ADC Module External Reference Characteristics ................................................. 797
ADC Module Internal Reference Characteristics .................................................. 797
SSI Characteristics ............................................................................................ 797
I2C Characteristics ............................................................................................. 799
100BASE-TX Transmitter Characteristics ............................................................ 800
100BASE-TX Transmitter Characteristics (informative) ......................................... 800
100BASE-TX Receiver Characteristics ................................................................ 800
10BASE-T Transmitter Characteristics ................................................................ 800
10BASE-T Transmitter Characteristics (informative) ............................................. 801
10BASE-T Receiver Characteristics .................................................................... 801
Isolation Transformers ....................................................................................... 801
July 25, 2011
15
Texas Instruments-Production Data
Table of Contents
Table 19-33.
Table 19-34.
Table 19-35.
Table 19-36.
Table B-1.
Nominal Power Consumption .............................................................................
Detailed Current Specifications ...........................................................................
Hibernation Detailed Current Specifications .........................................................
External VDDC Source Current Specifications .......................................................
Part Ordering Information ...................................................................................
16
802
802
803
803
829
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
List of Registers
The Cortex-M3 Processor ............................................................................................................. 48
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
Register 9:
Register 10:
Register 11:
Register 12:
Register 13:
Register 14:
Register 15:
Register 16:
Register 17:
Register 18:
Register 19:
Register 20:
Register 21:
Cortex General-Purpose Register 0 (R0) ........................................................................... 55
Cortex General-Purpose Register 1 (R1) ........................................................................... 55
Cortex General-Purpose Register 2 (R2) ........................................................................... 55
Cortex General-Purpose Register 3 (R3) ........................................................................... 55
Cortex General-Purpose Register 4 (R4) ........................................................................... 55
Cortex General-Purpose Register 5 (R5) ........................................................................... 55
Cortex General-Purpose Register 6 (R6) ........................................................................... 55
Cortex General-Purpose Register 7 (R7) ........................................................................... 55
Cortex General-Purpose Register 8 (R8) ........................................................................... 55
Cortex General-Purpose Register 9 (R9) ........................................................................... 55
Cortex General-Purpose Register 10 (R10) ....................................................................... 55
Cortex General-Purpose Register 11 (R11) ........................................................................ 55
Cortex General-Purpose Register 12 (R12) ....................................................................... 55
Stack Pointer (SP) ........................................................................................................... 56
Link Register (LR) ............................................................................................................ 57
Program Counter (PC) ..................................................................................................... 58
Program Status Register (PSR) ........................................................................................ 59
Priority Mask Register (PRIMASK) .................................................................................... 63
Fault Mask Register (FAULTMASK) .................................................................................. 64
Base Priority Mask Register (BASEPRI) ............................................................................ 65
Control Register (CONTROL) ........................................................................................... 66
Cortex-M3 Peripherals ................................................................................................................... 90
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
Register 9:
Register 10:
Register 11:
Register 12:
Register 13:
Register 14:
Register 15:
Register 16:
Register 17:
Register 18:
Register 19:
Register 20:
Register 21:
Register 22:
SysTick Control and Status Register (STCTRL), offset 0x010 ........................................... 101
SysTick Reload Value Register (STRELOAD), offset 0x014 .............................................. 103
SysTick Current Value Register (STCURRENT), offset 0x018 ........................................... 104
Interrupt 0-31 Set Enable (EN0), offset 0x100 .................................................................. 105
Interrupt 32-54 Set Enable (EN1), offset 0x104 ................................................................ 106
Interrupt 0-31 Clear Enable (DIS0), offset 0x180 .............................................................. 107
Interrupt 32-54 Clear Enable (DIS1), offset 0x184 ............................................................ 108
Interrupt 0-31 Set Pending (PEND0), offset 0x200 ........................................................... 109
Interrupt 32-54 Set Pending (PEND1), offset 0x204 ......................................................... 110
Interrupt 0-31 Clear Pending (UNPEND0), offset 0x280 ................................................... 111
Interrupt 32-54 Clear Pending (UNPEND1), offset 0x284 .................................................. 112
Interrupt 0-31 Active Bit (ACTIVE0), offset 0x300 ............................................................. 113
Interrupt 32-54 Active Bit (ACTIVE1), offset 0x304 ........................................................... 114
Interrupt 0-3 Priority (PRI0), offset 0x400 ......................................................................... 115
Interrupt 4-7 Priority (PRI1), offset 0x404 ......................................................................... 115
Interrupt 8-11 Priority (PRI2), offset 0x408 ....................................................................... 115
Interrupt 12-15 Priority (PRI3), offset 0x40C .................................................................... 115
Interrupt 16-19 Priority (PRI4), offset 0x410 ..................................................................... 115
Interrupt 20-23 Priority (PRI5), offset 0x414 ..................................................................... 115
Interrupt 24-27 Priority (PRI6), offset 0x418 ..................................................................... 115
Interrupt 28-31 Priority (PRI7), offset 0x41C .................................................................... 115
Interrupt 32-35 Priority (PRI8), offset 0x420 ..................................................................... 115
July 25, 2011
17
Texas Instruments-Production Data
Table of Contents
Register 23:
Register 24:
Register 25:
Register 26:
Register 27:
Register 28:
Register 29:
Register 30:
Register 31:
Register 32:
Register 33:
Register 34:
Register 35:
Register 36:
Register 37:
Register 38:
Register 39:
Register 40:
Register 41:
Register 42:
Register 43:
Register 44:
Register 45:
Register 46:
Register 47:
Register 48:
Register 49:
Register 50:
Register 51:
Register 52:
Register 53:
Register 54:
Interrupt 36-39 Priority (PRI9), offset 0x424 ..................................................................... 115
Interrupt 40-43 Priority (PRI10), offset 0x428 ................................................................... 115
Interrupt 44-47 Priority (PRI11), offset 0x42C ................................................................... 115
Interrupt 48-51 Priority (PRI12), offset 0x430 ................................................................... 115
Interrupt 52-54 Priority (PRI13), offset 0x434 ................................................................... 115
Software Trigger Interrupt (SWTRIG), offset 0xF00 .......................................................... 117
Auxiliary Control (ACTLR), offset 0x008 .......................................................................... 118
CPU ID Base (CPUID), offset 0xD00 ............................................................................... 120
Interrupt Control and State (INTCTRL), offset 0xD04 ........................................................ 121
Vector Table Offset (VTABLE), offset 0xD08 .................................................................... 124
Application Interrupt and Reset Control (APINT), offset 0xD0C ......................................... 125
System Control (SYSCTRL), offset 0xD10 ....................................................................... 127
Configuration and Control (CFGCTRL), offset 0xD14 ....................................................... 129
System Handler Priority 1 (SYSPRI1), offset 0xD18 ......................................................... 131
System Handler Priority 2 (SYSPRI2), offset 0xD1C ........................................................ 132
System Handler Priority 3 (SYSPRI3), offset 0xD20 ......................................................... 133
System Handler Control and State (SYSHNDCTRL), offset 0xD24 .................................... 134
Configurable Fault Status (FAULTSTAT), offset 0xD28 ..................................................... 138
Hard Fault Status (HFAULTSTAT), offset 0xD2C .............................................................. 144
Memory Management Fault Address (MMADDR), offset 0xD34 ........................................ 145
Bus Fault Address (FAULTADDR), offset 0xD38 .............................................................. 146
MPU Type (MPUTYPE), offset 0xD90 ............................................................................. 147
MPU Control (MPUCTRL), offset 0xD94 .......................................................................... 148
MPU Region Number (MPUNUMBER), offset 0xD98 ....................................................... 150
MPU Region Base Address (MPUBASE), offset 0xD9C ................................................... 151
MPU Region Base Address Alias 1 (MPUBASE1), offset 0xDA4 ....................................... 151
MPU Region Base Address Alias 2 (MPUBASE2), offset 0xDAC ...................................... 151
MPU Region Base Address Alias 3 (MPUBASE3), offset 0xDB4 ....................................... 151
MPU Region Attribute and Size (MPUATTR), offset 0xDA0 ............................................... 153
MPU Region Attribute and Size Alias 1 (MPUATTR1), offset 0xDA8 .................................. 153
MPU Region Attribute and Size Alias 2 (MPUATTR2), offset 0xDB0 .................................. 153
MPU Region Attribute and Size Alias 3 (MPUATTR3), offset 0xDB8 .................................. 153
System Control ............................................................................................................................ 168
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
Register 9:
Register 10:
Register 11:
Register 12:
Register 13:
Register 14:
Register 15:
Device Identification 0 (DID0), offset 0x000 ..................................................................... 187
Brown-Out Reset Control (PBORCTL), offset 0x030 ........................................................ 189
Raw Interrupt Status (RIS), offset 0x050 .......................................................................... 190
Interrupt Mask Control (IMC), offset 0x054 ...................................................................... 192
Masked Interrupt Status and Clear (MISC), offset 0x058 .................................................. 194
Reset Cause (RESC), offset 0x05C ................................................................................ 196
Run-Mode Clock Configuration (RCC), offset 0x060 ......................................................... 198
XTAL to PLL Translation (PLLCFG), offset 0x064 ............................................................. 202
GPIO High-Performance Bus Control (GPIOHBCTL), offset 0x06C ................................... 203
Run-Mode Clock Configuration 2 (RCC2), offset 0x070 .................................................... 205
Main Oscillator Control (MOSCCTL), offset 0x07C ........................................................... 208
Deep Sleep Clock Configuration (DSLPCLKCFG), offset 0x144 ........................................ 209
Precision Internal Oscillator Calibration (PIOSCCAL), offset 0x150 ................................... 211
Precision Internal Oscillator Statistics (PIOSCSTAT), offset 0x154 .................................... 213
Device Identification 1 (DID1), offset 0x004 ..................................................................... 214
18
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 16:
Register 17:
Register 18:
Register 19:
Register 20:
Register 21:
Register 22:
Register 23:
Register 24:
Register 25:
Register 26:
Register 27:
Register 28:
Register 29:
Register 30:
Register 31:
Register 32:
Register 33:
Register 34:
Register 35:
Register 36:
Register 37:
Register 38:
Device Capabilities 0 (DC0), offset 0x008 ........................................................................ 216
Device Capabilities 1 (DC1), offset 0x010 ........................................................................ 217
Device Capabilities 2 (DC2), offset 0x014 ........................................................................ 219
Device Capabilities 3 (DC3), offset 0x018 ........................................................................ 221
Device Capabilities 4 (DC4), offset 0x01C ....................................................................... 223
Device Capabilities 5 (DC5), offset 0x020 ........................................................................ 225
Device Capabilities 6 (DC6), offset 0x024 ........................................................................ 226
Device Capabilities 7 (DC7), offset 0x028 ........................................................................ 227
Device Capabilities 8 ADC Channels (DC8), offset 0x02C ................................................ 231
Device Capabilities 9 ADC Digital Comparators (DC9), offset 0x190 ................................. 234
Non-Volatile Memory Information (NVMSTAT), offset 0x1A0 ............................................. 236
Run Mode Clock Gating Control Register 0 (RCGC0), offset 0x100 ................................... 237
Sleep Mode Clock Gating Control Register 0 (SCGC0), offset 0x110 ................................. 239
Deep Sleep Mode Clock Gating Control Register 0 (DCGC0), offset 0x120 ....................... 241
Run Mode Clock Gating Control Register 1 (RCGC1), offset 0x104 ................................... 243
Sleep Mode Clock Gating Control Register 1 (SCGC1), offset 0x114 ................................. 245
Deep-Sleep Mode Clock Gating Control Register 1 (DCGC1), offset 0x124 ....................... 248
Run Mode Clock Gating Control Register 2 (RCGC2), offset 0x108 ................................... 251
Sleep Mode Clock Gating Control Register 2 (SCGC2), offset 0x118 ................................. 253
Deep Sleep Mode Clock Gating Control Register 2 (DCGC2), offset 0x128 ....................... 255
Software Reset Control 0 (SRCR0), offset 0x040 ............................................................. 257
Software Reset Control 1 (SRCR1), offset 0x044 ............................................................. 259
Software Reset Control 2 (SRCR2), offset 0x048 ............................................................. 261
Hibernation Module ..................................................................................................................... 263
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
Register 9:
Register 10:
Register 11:
Hibernation RTC Counter (HIBRTCC), offset 0x000 .........................................................
Hibernation RTC Match 0 (HIBRTCM0), offset 0x004 .......................................................
Hibernation RTC Match 1 (HIBRTCM1), offset 0x008 .......................................................
Hibernation RTC Load (HIBRTCLD), offset 0x00C ...........................................................
Hibernation Control (HIBCTL), offset 0x010 .....................................................................
Hibernation Interrupt Mask (HIBIM), offset 0x014 .............................................................
Hibernation Raw Interrupt Status (HIBRIS), offset 0x018 ..................................................
Hibernation Masked Interrupt Status (HIBMIS), offset 0x01C ............................................
Hibernation Interrupt Clear (HIBIC), offset 0x020 .............................................................
Hibernation RTC Trim (HIBRTCT), offset 0x024 ...............................................................
Hibernation Data (HIBDATA), offset 0x030-0x12C ............................................................
274
275
276
277
278
281
283
285
287
288
289
Internal Memory ........................................................................................................................... 290
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
Register 9:
Register 10:
Register 11:
Register 12:
Flash Memory Address (FMA), offset 0x000 .................................................................... 300
Flash Memory Data (FMD), offset 0x004 ......................................................................... 301
Flash Memory Control (FMC), offset 0x008 ..................................................................... 302
Flash Controller Raw Interrupt Status (FCRIS), offset 0x00C ............................................ 305
Flash Controller Interrupt Mask (FCIM), offset 0x010 ........................................................ 306
Flash Controller Masked Interrupt Status and Clear (FCMISC), offset 0x014 ..................... 307
Flash Memory Control 2 (FMC2), offset 0x020 ................................................................. 308
Flash Write Buffer Valid (FWBVAL), offset 0x030 ............................................................. 309
Flash Control (FCTL), offset 0x0F8 ................................................................................. 310
Flash Write Buffer n (FWBn), offset 0x100 - 0x17C .......................................................... 311
ROM Control (RMCTL), offset 0x0F0 .............................................................................. 312
Flash Memory Protection Read Enable 0 (FMPRE0), offset 0x130 and 0x200 ................... 313
July 25, 2011
19
Texas Instruments-Production Data
Table of Contents
Register 13:
Register 14:
Register 15:
Register 16:
Register 17:
Register 18:
Register 19:
Register 20:
Register 21:
Register 22:
Register 23:
Register 24:
Register 25:
Register 26:
Register 27:
Register 28:
Register 29:
Register 30:
Register 31:
Register 32:
Flash Memory Protection Program Enable 0 (FMPPE0), offset 0x134 and 0x400 ............... 314
Boot Configuration (BOOTCFG), offset 0x1D0 ................................................................. 315
User Register 0 (USER_REG0), offset 0x1E0 .................................................................. 317
User Register 1 (USER_REG1), offset 0x1E4 .................................................................. 318
User Register 2 (USER_REG2), offset 0x1E8 .................................................................. 319
User Register 3 (USER_REG3), offset 0x1EC ................................................................. 320
Flash Memory Protection Read Enable 1 (FMPRE1), offset 0x204 .................................... 321
Flash Memory Protection Read Enable 2 (FMPRE2), offset 0x208 .................................... 322
Flash Memory Protection Read Enable 3 (FMPRE3), offset 0x20C ................................... 323
Flash Memory Protection Read Enable 4 (FMPRE4), offset 0x210 .................................... 324
Flash Memory Protection Read Enable 5 (FMPRE5), offset 0x214 .................................... 325
Flash Memory Protection Read Enable 6 (FMPRE6), offset 0x218 .................................... 326
Flash Memory Protection Read Enable 7 (FMPRE7), offset 0x21C ................................... 327
Flash Memory Protection Program Enable 1 (FMPPE1), offset 0x404 ............................... 328
Flash Memory Protection Program Enable 2 (FMPPE2), offset 0x408 ............................... 329
Flash Memory Protection Program Enable 3 (FMPPE3), offset 0x40C ............................... 330
Flash Memory Protection Program Enable 4 (FMPPE4), offset 0x410 ............................... 331
Flash Memory Protection Program Enable 5 (FMPPE5), offset 0x414 ............................... 332
Flash Memory Protection Program Enable 6 (FMPPE6), offset 0x418 ............................... 333
Flash Memory Protection Program Enable 7 (FMPPE7), offset 0x41C ............................... 334
Micro Direct Memory Access (μDMA) ........................................................................................ 335
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
Register 9:
Register 10:
Register 11:
Register 12:
Register 13:
Register 14:
Register 15:
Register 16:
Register 17:
Register 18:
Register 19:
Register 20:
Register 21:
Register 22:
Register 23:
Register 24:
Register 25:
Register 26:
Register 27:
DMA Channel Source Address End Pointer (DMASRCENDP), offset 0x000 ...................... 359
DMA Channel Destination Address End Pointer (DMADSTENDP), offset 0x004 ................ 360
DMA Channel Control Word (DMACHCTL), offset 0x008 .................................................. 361
DMA Status (DMASTAT), offset 0x000 ............................................................................ 366
DMA Configuration (DMACFG), offset 0x004 ................................................................... 368
DMA Channel Control Base Pointer (DMACTLBASE), offset 0x008 .................................. 369
DMA Alternate Channel Control Base Pointer (DMAALTBASE), offset 0x00C .................... 370
DMA Channel Wait-on-Request Status (DMAWAITSTAT), offset 0x010 ............................. 371
DMA Channel Software Request (DMASWREQ), offset 0x014 ......................................... 372
DMA Channel Useburst Set (DMAUSEBURSTSET), offset 0x018 .................................... 373
DMA Channel Useburst Clear (DMAUSEBURSTCLR), offset 0x01C ................................. 374
DMA Channel Request Mask Set (DMAREQMASKSET), offset 0x020 .............................. 375
DMA Channel Request Mask Clear (DMAREQMASKCLR), offset 0x024 ........................... 376
DMA Channel Enable Set (DMAENASET), offset 0x028 ................................................... 377
DMA Channel Enable Clear (DMAENACLR), offset 0x02C ............................................... 378
DMA Channel Primary Alternate Set (DMAALTSET), offset 0x030 .................................... 379
DMA Channel Primary Alternate Clear (DMAALTCLR), offset 0x034 ................................. 380
DMA Channel Priority Set (DMAPRIOSET), offset 0x038 ................................................. 381
DMA Channel Priority Clear (DMAPRIOCLR), offset 0x03C .............................................. 382
DMA Bus Error Clear (DMAERRCLR), offset 0x04C ........................................................ 383
DMA Channel Assignment (DMACHASGN), offset 0x500 ................................................. 384
DMA Channel Interrupt Status (DMACHIS), offset 0x504 .................................................. 385
DMA Peripheral Identification 0 (DMAPeriphID0), offset 0xFE0 ......................................... 386
DMA Peripheral Identification 1 (DMAPeriphID1), offset 0xFE4 ......................................... 387
DMA Peripheral Identification 2 (DMAPeriphID2), offset 0xFE8 ......................................... 388
DMA Peripheral Identification 3 (DMAPeriphID3), offset 0xFEC ........................................ 389
DMA Peripheral Identification 4 (DMAPeriphID4), offset 0xFD0 ......................................... 390
20
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 28:
Register 29:
Register 30:
Register 31:
DMA PrimeCell Identification 0 (DMAPCellID0), offset 0xFF0 ...........................................
DMA PrimeCell Identification 1 (DMAPCellID1), offset 0xFF4 ...........................................
DMA PrimeCell Identification 2 (DMAPCellID2), offset 0xFF8 ...........................................
DMA PrimeCell Identification 3 (DMAPCellID3), offset 0xFFC ...........................................
391
392
393
394
General-Purpose Input/Outputs (GPIOs) ................................................................................... 395
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
Register 9:
Register 10:
Register 11:
Register 12:
Register 13:
Register 14:
Register 15:
Register 16:
Register 17:
Register 18:
Register 19:
Register 20:
Register 21:
Register 22:
Register 23:
Register 24:
Register 25:
Register 26:
Register 27:
Register 28:
Register 29:
Register 30:
Register 31:
Register 32:
Register 33:
Register 34:
GPIO Data (GPIODATA), offset 0x000 ............................................................................ 408
GPIO Direction (GPIODIR), offset 0x400 ......................................................................... 409
GPIO Interrupt Sense (GPIOIS), offset 0x404 .................................................................. 410
GPIO Interrupt Both Edges (GPIOIBE), offset 0x408 ........................................................ 411
GPIO Interrupt Event (GPIOIEV), offset 0x40C ................................................................ 412
GPIO Interrupt Mask (GPIOIM), offset 0x410 ................................................................... 413
GPIO Raw Interrupt Status (GPIORIS), offset 0x414 ........................................................ 414
GPIO Masked Interrupt Status (GPIOMIS), offset 0x418 ................................................... 415
GPIO Interrupt Clear (GPIOICR), offset 0x41C ................................................................ 417
GPIO Alternate Function Select (GPIOAFSEL), offset 0x420 ............................................ 418
GPIO 2-mA Drive Select (GPIODR2R), offset 0x500 ........................................................ 420
GPIO 4-mA Drive Select (GPIODR4R), offset 0x504 ........................................................ 421
GPIO 8-mA Drive Select (GPIODR8R), offset 0x508 ........................................................ 422
GPIO Open Drain Select (GPIOODR), offset 0x50C ......................................................... 423
GPIO Pull-Up Select (GPIOPUR), offset 0x510 ................................................................ 424
GPIO Pull-Down Select (GPIOPDR), offset 0x514 ........................................................... 426
GPIO Slew Rate Control Select (GPIOSLR), offset 0x518 ................................................ 428
GPIO Digital Enable (GPIODEN), offset 0x51C ................................................................ 429
GPIO Lock (GPIOLOCK), offset 0x520 ............................................................................ 431
GPIO Commit (GPIOCR), offset 0x524 ............................................................................ 432
GPIO Analog Mode Select (GPIOAMSEL), offset 0x528 ................................................... 434
GPIO Port Control (GPIOPCTL), offset 0x52C ................................................................. 435
GPIO Peripheral Identification 4 (GPIOPeriphID4), offset 0xFD0 ....................................... 437
GPIO Peripheral Identification 5 (GPIOPeriphID5), offset 0xFD4 ....................................... 438
GPIO Peripheral Identification 6 (GPIOPeriphID6), offset 0xFD8 ....................................... 439
GPIO Peripheral Identification 7 (GPIOPeriphID7), offset 0xFDC ...................................... 440
GPIO Peripheral Identification 0 (GPIOPeriphID0), offset 0xFE0 ....................................... 441
GPIO Peripheral Identification 1 (GPIOPeriphID1), offset 0xFE4 ....................................... 442
GPIO Peripheral Identification 2 (GPIOPeriphID2), offset 0xFE8 ....................................... 443
GPIO Peripheral Identification 3 (GPIOPeriphID3), offset 0xFEC ...................................... 444
GPIO PrimeCell Identification 0 (GPIOPCellID0), offset 0xFF0 .......................................... 445
GPIO PrimeCell Identification 1 (GPIOPCellID1), offset 0xFF4 .......................................... 446
GPIO PrimeCell Identification 2 (GPIOPCellID2), offset 0xFF8 .......................................... 447
GPIO PrimeCell Identification 3 (GPIOPCellID3), offset 0xFFC ......................................... 448
General-Purpose Timers ............................................................................................................. 449
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
GPTM Configuration (GPTMCFG), offset 0x000 ..............................................................
GPTM Timer A Mode (GPTMTAMR), offset 0x004 ...........................................................
GPTM Timer B Mode (GPTMTBMR), offset 0x008 ...........................................................
GPTM Control (GPTMCTL), offset 0x00C ........................................................................
GPTM Interrupt Mask (GPTMIMR), offset 0x018 ..............................................................
GPTM Raw Interrupt Status (GPTMRIS), offset 0x01C .....................................................
GPTM Masked Interrupt Status (GPTMMIS), offset 0x020 ................................................
GPTM Interrupt Clear (GPTMICR), offset 0x024 ..............................................................
July 25, 2011
465
466
468
470
473
475
478
481
21
Texas Instruments-Production Data
Table of Contents
Register 9:
Register 10:
Register 11:
Register 12:
Register 13:
Register 14:
Register 15:
Register 16:
Register 17:
Register 18:
Register 19:
Register 20:
GPTM Timer A Interval Load (GPTMTAILR), offset 0x028 ................................................ 483
GPTM Timer B Interval Load (GPTMTBILR), offset 0x02C ................................................ 484
GPTM Timer A Match (GPTMTAMATCHR), offset 0x030 .................................................. 485
GPTM Timer B Match (GPTMTBMATCHR), offset 0x034 ................................................. 486
GPTM Timer A Prescale (GPTMTAPR), offset 0x038 ....................................................... 487
GPTM Timer B Prescale (GPTMTBPR), offset 0x03C ...................................................... 488
GPTM TimerA Prescale Match (GPTMTAPMR), offset 0x040 ........................................... 489
GPTM TimerB Prescale Match (GPTMTBPMR), offset 0x044 ........................................... 490
GPTM Timer A (GPTMTAR), offset 0x048 ....................................................................... 491
GPTM Timer B (GPTMTBR), offset 0x04C ....................................................................... 492
GPTM Timer A Value (GPTMTAV), offset 0x050 ............................................................... 493
GPTM Timer B Value (GPTMTBV), offset 0x054 .............................................................. 494
Watchdog Timers ......................................................................................................................... 495
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
Register 9:
Register 10:
Register 11:
Register 12:
Register 13:
Register 14:
Register 15:
Register 16:
Register 17:
Register 18:
Register 19:
Register 20:
Watchdog Load (WDTLOAD), offset 0x000 ...................................................................... 499
Watchdog Value (WDTVALUE), offset 0x004 ................................................................... 500
Watchdog Control (WDTCTL), offset 0x008 ..................................................................... 501
Watchdog Interrupt Clear (WDTICR), offset 0x00C .......................................................... 503
Watchdog Raw Interrupt Status (WDTRIS), offset 0x010 .................................................. 504
Watchdog Masked Interrupt Status (WDTMIS), offset 0x014 ............................................. 505
Watchdog Test (WDTTEST), offset 0x418 ....................................................................... 506
Watchdog Lock (WDTLOCK), offset 0xC00 ..................................................................... 507
Watchdog Peripheral Identification 4 (WDTPeriphID4), offset 0xFD0 ................................. 508
Watchdog Peripheral Identification 5 (WDTPeriphID5), offset 0xFD4 ................................. 509
Watchdog Peripheral Identification 6 (WDTPeriphID6), offset 0xFD8 ................................. 510
Watchdog Peripheral Identification 7 (WDTPeriphID7), offset 0xFDC ................................ 511
Watchdog Peripheral Identification 0 (WDTPeriphID0), offset 0xFE0 ................................. 512
Watchdog Peripheral Identification 1 (WDTPeriphID1), offset 0xFE4 ................................. 513
Watchdog Peripheral Identification 2 (WDTPeriphID2), offset 0xFE8 ................................. 514
Watchdog Peripheral Identification 3 (WDTPeriphID3), offset 0xFEC ................................. 515
Watchdog PrimeCell Identification 0 (WDTPCellID0), offset 0xFF0 .................................... 516
Watchdog PrimeCell Identification 1 (WDTPCellID1), offset 0xFF4 .................................... 517
Watchdog PrimeCell Identification 2 (WDTPCellID2), offset 0xFF8 .................................... 518
Watchdog PrimeCell Identification 3 (WDTPCellID3 ), offset 0xFFC .................................. 519
Analog-to-Digital Converter (ADC) ............................................................................................. 520
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
Register 9:
Register 10:
Register 11:
Register 12:
Register 13:
Register 14:
ADC Active Sample Sequencer (ADCACTSS), offset 0x000 ............................................. 542
ADC Raw Interrupt Status (ADCRIS), offset 0x004 ........................................................... 543
ADC Interrupt Mask (ADCIM), offset 0x008 ..................................................................... 545
ADC Interrupt Status and Clear (ADCISC), offset 0x00C .................................................. 547
ADC Overflow Status (ADCOSTAT), offset 0x010 ............................................................ 550
ADC Event Multiplexer Select (ADCEMUX), offset 0x014 ................................................. 552
ADC Underflow Status (ADCUSTAT), offset 0x018 ........................................................... 556
ADC Sample Sequencer Priority (ADCSSPRI), offset 0x020 ............................................. 557
ADC Sample Phase Control (ADCSPC), offset 0x024 ...................................................... 559
ADC Processor Sample Sequence Initiate (ADCPSSI), offset 0x028 ................................. 561
ADC Sample Averaging Control (ADCSAC), offset 0x030 ................................................. 563
ADC Digital Comparator Interrupt Status and Clear (ADCDCISC), offset 0x034 ................. 564
ADC Control (ADCCTL), offset 0x038 ............................................................................. 566
ADC Sample Sequence Input Multiplexer Select 0 (ADCSSMUX0), offset 0x040 ............... 567
22
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 15:
Register 16:
Register 17:
Register 18:
Register 19:
Register 20:
Register 21:
Register 22:
Register 23:
Register 24:
Register 25:
Register 26:
Register 27:
Register 28:
Register 29:
Register 30:
Register 31:
Register 32:
Register 33:
Register 34:
Register 35:
Register 36:
Register 37:
Register 38:
Register 39:
Register 40:
Register 41:
Register 42:
Register 43:
Register 44:
Register 45:
Register 46:
Register 47:
Register 48:
Register 49:
Register 50:
Register 51:
Register 52:
Register 53:
Register 54:
ADC Sample Sequence Control 0 (ADCSSCTL0), offset 0x044 ........................................ 569
ADC Sample Sequence Result FIFO 0 (ADCSSFIFO0), offset 0x048 ................................ 572
ADC Sample Sequence Result FIFO 1 (ADCSSFIFO1), offset 0x068 ................................ 572
ADC Sample Sequence Result FIFO 2 (ADCSSFIFO2), offset 0x088 ................................ 572
ADC Sample Sequence Result FIFO 3 (ADCSSFIFO3), offset 0x0A8 ............................... 572
ADC Sample Sequence FIFO 0 Status (ADCSSFSTAT0), offset 0x04C ............................. 573
ADC Sample Sequence FIFO 1 Status (ADCSSFSTAT1), offset 0x06C ............................. 573
ADC Sample Sequence FIFO 2 Status (ADCSSFSTAT2), offset 0x08C ............................ 573
ADC Sample Sequence FIFO 3 Status (ADCSSFSTAT3), offset 0x0AC ............................ 573
ADC Sample Sequence 0 Operation (ADCSSOP0), offset 0x050 ...................................... 575
ADC Sample Sequence 0 Digital Comparator Select (ADCSSDC0), offset 0x054 .............. 577
ADC Sample Sequence Input Multiplexer Select 1 (ADCSSMUX1), offset 0x060 ............... 579
ADC Sample Sequence Input Multiplexer Select 2 (ADCSSMUX2), offset 0x080 ............... 579
ADC Sample Sequence Control 1 (ADCSSCTL1), offset 0x064 ........................................ 580
ADC Sample Sequence Control 2 (ADCSSCTL2), offset 0x084 ........................................ 580
ADC Sample Sequence 1 Operation (ADCSSOP1), offset 0x070 ...................................... 582
ADC Sample Sequence 2 Operation (ADCSSOP2), offset 0x090 ..................................... 582
ADC Sample Sequence 1 Digital Comparator Select (ADCSSDC1), offset 0x074 .............. 583
ADC Sample Sequence 2 Digital Comparator Select (ADCSSDC2), offset 0x094 .............. 583
ADC Sample Sequence Input Multiplexer Select 3 (ADCSSMUX3), offset 0x0A0 ............... 585
ADC Sample Sequence Control 3 (ADCSSCTL3), offset 0x0A4 ........................................ 586
ADC Sample Sequence 3 Operation (ADCSSOP3), offset 0x0B0 ..................................... 587
ADC Sample Sequence 3 Digital Comparator Select (ADCSSDC3), offset 0x0B4 .............. 588
ADC Digital Comparator Reset Initial Conditions (ADCDCRIC), offset 0xD00 ..................... 589
ADC Digital Comparator Control 0 (ADCDCCTL0), offset 0xE00 ....................................... 594
ADC Digital Comparator Control 1 (ADCDCCTL1), offset 0xE04 ....................................... 594
ADC Digital Comparator Control 2 (ADCDCCTL2), offset 0xE08 ....................................... 594
ADC Digital Comparator Control 3 (ADCDCCTL3), offset 0xE0C ...................................... 594
ADC Digital Comparator Control 4 (ADCDCCTL4), offset 0xE10 ....................................... 594
ADC Digital Comparator Control 5 (ADCDCCTL5), offset 0xE14 ....................................... 594
ADC Digital Comparator Control 6 (ADCDCCTL6), offset 0xE18 ....................................... 594
ADC Digital Comparator Control 7 (ADCDCCTL7), offset 0xE1C ...................................... 594
ADC Digital Comparator Range 0 (ADCDCCMP0), offset 0xE40 ....................................... 596
ADC Digital Comparator Range 1 (ADCDCCMP1), offset 0xE44 ....................................... 596
ADC Digital Comparator Range 2 (ADCDCCMP2), offset 0xE48 ....................................... 596
ADC Digital Comparator Range 3 (ADCDCCMP3), offset 0xE4C ...................................... 596
ADC Digital Comparator Range 4 (ADCDCCMP4), offset 0xE50 ....................................... 596
ADC Digital Comparator Range 5 (ADCDCCMP5), offset 0xE54 ....................................... 596
ADC Digital Comparator Range 6 (ADCDCCMP6), offset 0xE58 ....................................... 596
ADC Digital Comparator Range 7 (ADCDCCMP7), offset 0xE5C ...................................... 596
Universal Asynchronous Receivers/Transmitters (UARTs) ..................................................... 598
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
UART Data (UARTDR), offset 0x000 ...............................................................................
UART Receive Status/Error Clear (UARTRSR/UARTECR), offset 0x004 ...........................
UART Flag (UARTFR), offset 0x018 ................................................................................
UART IrDA Low-Power Register (UARTILPR), offset 0x020 .............................................
UART Integer Baud-Rate Divisor (UARTIBRD), offset 0x024 ............................................
UART Fractional Baud-Rate Divisor (UARTFBRD), offset 0x028 .......................................
UART Line Control (UARTLCRH), offset 0x02C ...............................................................
July 25, 2011
612
614
617
620
621
622
623
23
Texas Instruments-Production Data
Table of Contents
Register 8:
Register 9:
Register 10:
Register 11:
Register 12:
Register 13:
Register 14:
Register 15:
Register 16:
Register 17:
Register 18:
Register 19:
Register 20:
Register 21:
Register 22:
Register 23:
Register 24:
Register 25:
Register 26:
Register 27:
Register 28:
Register 29:
UART Control (UARTCTL), offset 0x030 ......................................................................... 625
UART Interrupt FIFO Level Select (UARTIFLS), offset 0x034 ........................................... 629
UART Interrupt Mask (UARTIM), offset 0x038 ................................................................. 631
UART Raw Interrupt Status (UARTRIS), offset 0x03C ...................................................... 635
UART Masked Interrupt Status (UARTMIS), offset 0x040 ................................................. 638
UART Interrupt Clear (UARTICR), offset 0x044 ............................................................... 641
UART DMA Control (UARTDMACTL), offset 0x048 .......................................................... 643
UART LIN Control (UARTLCTL), offset 0x090 ................................................................. 644
UART LIN Snap Shot (UARTLSS), offset 0x094 ............................................................... 645
UART LIN Timer (UARTLTIM), offset 0x098 ..................................................................... 646
UART Peripheral Identification 4 (UARTPeriphID4), offset 0xFD0 ..................................... 647
UART Peripheral Identification 5 (UARTPeriphID5), offset 0xFD4 ..................................... 648
UART Peripheral Identification 6 (UARTPeriphID6), offset 0xFD8 ..................................... 649
UART Peripheral Identification 7 (UARTPeriphID7), offset 0xFDC ..................................... 650
UART Peripheral Identification 0 (UARTPeriphID0), offset 0xFE0 ...................................... 651
UART Peripheral Identification 1 (UARTPeriphID1), offset 0xFE4 ...................................... 652
UART Peripheral Identification 2 (UARTPeriphID2), offset 0xFE8 ...................................... 653
UART Peripheral Identification 3 (UARTPeriphID3), offset 0xFEC ..................................... 654
UART PrimeCell Identification 0 (UARTPCellID0), offset 0xFF0 ........................................ 655
UART PrimeCell Identification 1 (UARTPCellID1), offset 0xFF4 ........................................ 656
UART PrimeCell Identification 2 (UARTPCellID2), offset 0xFF8 ........................................ 657
UART PrimeCell Identification 3 (UARTPCellID3), offset 0xFFC ........................................ 658
Synchronous Serial Interface (SSI) ............................................................................................ 659
Register 1:
Register 2:
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
Register 9:
Register 10:
Register 11:
Register 12:
Register 13:
Register 14:
Register 15:
Register 16:
Register 17:
Register 18:
Register 19:
Register 20:
Register 21:
Register 22:
SSI Control 0 (SSICR0), offset 0x000 .............................................................................. 674
SSI Control 1 (SSICR1), offset 0x004 .............................................................................. 676
SSI Data (SSIDR), offset 0x008 ...................................................................................... 678
SSI Status (SSISR), offset 0x00C ................................................................................... 679
SSI Clock Prescale (SSICPSR), offset 0x010 .................................................................. 681
SSI Interrupt Mask (SSIIM), offset 0x014 ......................................................................... 682
SSI Raw Interrupt Status (SSIRIS), offset 0x018 .............................................................. 683
SSI Masked Interrupt Status (SSIMIS), offset 0x01C ........................................................ 685
SSI Interrupt Clear (SSIICR), offset 0x020 ....................................................................... 687
SSI DMA Control (SSIDMACTL), offset 0x024 ................................................................. 688
SSI Peripheral Identification 4 (SSIPeriphID4), offset 0xFD0 ............................................. 689
SSI Peripheral Identification 5 (SSIPeriphID5), offset 0xFD4 ............................................. 690
SSI Peripheral Identification 6 (SSIPeriphID6), offset 0xFD8 ............................................. 691
SSI Peripheral Identification 7 (SSIPeriphID7), offset 0xFDC ............................................ 692
SSI Peripheral Identification 0 (SSIPeriphID0), offset 0xFE0 ............................................. 693
SSI Peripheral Identification 1 (SSIPeriphID1), offset 0xFE4 ............................................. 694
SSI Peripheral Identification 2 (SSIPeriphID2), offset 0xFE8 ............................................. 695
SSI Peripheral Identification 3 (SSIPeriphID3), offset 0xFEC ............................................ 696
SSI PrimeCell Identification 0 (SSIPCellID0), offset 0xFF0 ............................................... 697
SSI PrimeCell Identification 1 (SSIPCellID1), offset 0xFF4 ............................................... 698
SSI PrimeCell Identification 2 (SSIPCellID2), offset 0xFF8 ............................................... 699
SSI PrimeCell Identification 3 (SSIPCellID3), offset 0xFFC ............................................... 700
Inter-Integrated Circuit (I2C) Interface ........................................................................................ 701
Register 1:
Register 2:
I2C Master Slave Address (I2CMSA), offset 0x000 ........................................................... 718
I2C Master Control/Status (I2CMCS), offset 0x004 ........................................................... 719
24
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 3:
Register 4:
Register 5:
Register 6:
Register 7:
Register 8:
Register 9:
Register 10:
Register 11:
Register 12:
Register 13:
Register 14:
Register 15:
Register 16:
I2C Master Data (I2CMDR), offset 0x008 ......................................................................... 723
I2C Master Timer Period (I2CMTPR), offset 0x00C ........................................................... 724
I2C Master Interrupt Mask (I2CMIMR), offset 0x010 ......................................................... 725
I2C Master Raw Interrupt Status (I2CMRIS), offset 0x014 ................................................. 726
I2C Master Masked Interrupt Status (I2CMMIS), offset 0x018 ........................................... 727
I2C Master Interrupt Clear (I2CMICR), offset 0x01C ......................................................... 728
I2C Master Configuration (I2CMCR), offset 0x020 ............................................................ 729
I2C Slave Own Address (I2CSOAR), offset 0x800 ............................................................ 730
I2C Slave Control/Status (I2CSCSR), offset 0x804 ........................................................... 731
I2C Slave Data (I2CSDR), offset 0x808 ........................................................................... 733
I2C Slave Interrupt Mask (I2CSIMR), offset 0x80C ........................................................... 734
I2C Slave Raw Interrupt Status (I2CSRIS), offset 0x810 ................................................... 735
I2C Slave Masked Interrupt Status (I2CSMIS), offset 0x814 .............................................. 736
I2C Slave Interrupt Clear (I2CSICR), offset 0x818 ............................................................ 737
July 25, 2011
25
Texas Instruments-Production Data
Revision History
Revision History
The revision history table notes changes made between the indicated revisions of the LM3S1G58
data sheet.
Table 1. Revision History
Date
Revision
July 2011
9970
March 2011
9538
Description
■
Corrected "Reset Sources" table.
■
Added Important Note that RCC register must be written before RCC2 register.
■
Added missing Start Calibration (CAL) bit to the Precision Internal Oscillator Calibration
(PIOSCCAL) register.
■
Added missing Precision Internal Oscillator Statistics (PIOSCSTAT) register.
■
In Hibernation Module chapter, deleted section "Special Considerations When Using a 4.194304-MHz
Crystal" as this content was added to the errata document.
■
Added a note that all GPIO signals are 5-V tolerant when configured as inputs except for PB0 and
PB1, which are limited to 3.6 V.
■
Corrected LIN Mode bit names in UART Interrupt Clear (UARTICR) register.
■
Corrected pin number for RST in table "Connections for Unused Signals" (other pin tables were
correct).
■
In the "Operating Characteristics" chapter:
–
In the "Thermal Characteristics" table, the Thermal resistance value was changed.
–
In the "ESD Absolute Maximum Ratings" table, the VESDCDM parameter was changed and the
VESDMM parameter was deleted.
■
The "Electrical Characteristics" chapter was reorganized by module. In addition, some of the
Recommended DC Operating Conditions, LDO Regulator, Clock, GPIO, Hibernation Module, ADC,
and SSI characteristics were finalized.
■
Additional minor data sheet clarifications and corrections.
Started tracking revision history.
26
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
About This Document
This data sheet provides reference information for the LM3S1G58 microcontroller, describing the
functional blocks of the system-on-chip (SoC) device designed around the ARM® Cortex™-M3
core.
Audience
This manual is intended for system software developers, hardware designers, and application
developers.
About This Manual
This document is organized into sections that correspond to each major feature.
Related Documents
®
The following related documents are available on the Stellaris web site at www.ti.com/stellaris:
■ Stellaris® Errata
■ ARM® Cortex™-M3 Errata
■ Cortex™-M3 Instruction Set Technical User's Manual
■ Stellaris® Boot Loader User's Guide
■ Stellaris® Graphics Library User's Guide
■ Stellaris® Peripheral Driver Library User's Guide
■ Stellaris® ROM User’s Guide
The following related documents are also referenced:
■ ARM® Debug Interface V5 Architecture Specification
■ IEEE Standard 1149.1-Test Access Port and Boundary-Scan Architecture
This documentation list was current as of publication date. Please check the web site for additional
documentation, including application notes and white papers.
July 25, 2011
27
Texas Instruments-Production Data
About This Document
Documentation Conventions
This document uses the conventions shown in Table 2 on page 28.
Table 2. Documentation Conventions
Notation
Meaning
General Register Notation
REGISTER
APB registers are indicated in uppercase bold. For example, PBORCTL is the Power-On and
Brown-Out Reset Control register. If a register name contains a lowercase n, it represents more
than one register. For example, SRCRn represents any (or all) of the three Software Reset Control
registers: SRCR0, SRCR1 , and SRCR2.
bit
A single bit in a register.
bit field
Two or more consecutive and related bits.
offset 0xnnn
A hexadecimal increment to a register's address, relative to that module's base address as specified
in Table 2-4 on page 67.
Register N
Registers are numbered consecutively throughout the document to aid in referencing them. The
register number has no meaning to software.
reserved
Register bits marked reserved are reserved for future use. In most cases, reserved bits are set to
0; however, user software should not rely on the value of a reserved bit. To provide software
compatibility with future products, the value of a reserved bit should be preserved across a
read-modify-write operation.
yy:xx
The range of register bits inclusive from xx to yy. For example, 31:15 means bits 15 through 31 in
that register.
Register Bit/Field
Types
This value in the register bit diagram indicates whether software running on the controller can
change the value of the bit field.
RC
Software can read this field. The bit or field is cleared by hardware after reading the bit/field.
RO
Software can read this field. Always write the chip reset value.
R/W
Software can read or write this field.
R/WC
Software can read or write this field. Writing to it with any value clears the register.
R/W1C
Software can read or write this field. A write of a 0 to a W1C bit does not affect the bit value in the
register. A write of a 1 clears the value of the bit in the register; the remaining bits remain unchanged.
This register type is primarily used for clearing interrupt status bits where the read operation
provides the interrupt status and the write of the read value clears only the interrupts being reported
at the time the register was read.
R/W1S
Software can read or write a 1 to this field. A write of a 0 to a R/W1S bit does not affect the bit
value in the register.
W1C
Software can write this field. A write of a 0 to a W1C bit does not affect the bit value in the register.
A write of a 1 clears the value of the bit in the register; the remaining bits remain unchanged. A
read of the register returns no meaningful data.
This register is typically used to clear the corresponding bit in an interrupt register.
WO
Only a write by software is valid; a read of the register returns no meaningful data.
Register Bit/Field
Reset Value
This value in the register bit diagram shows the bit/field value after any reset, unless noted.
0
Bit cleared to 0 on chip reset.
1
Bit set to 1 on chip reset.
-
Nondeterministic.
Pin/Signal Notation
[]
Pin alternate function; a pin defaults to the signal without the brackets.
pin
Refers to the physical connection on the package.
signal
Refers to the electrical signal encoding of a pin.
28
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 2. Documentation Conventions (continued)
Notation
Meaning
assert a signal
Change the value of the signal from the logically False state to the logically True state. For active
High signals, the asserted signal value is 1 (High); for active Low signals, the asserted signal value
is 0 (Low). The active polarity (High or Low) is defined by the signal name (see SIGNAL and SIGNAL
below).
deassert a signal
Change the value of the signal from the logically True state to the logically False state.
SIGNAL
Signal names are in uppercase and in the Courier font. An overbar on a signal name indicates that
it is active Low. To assert SIGNAL is to drive it Low; to deassert SIGNAL is to drive it High.
SIGNAL
Signal names are in uppercase and in the Courier font. An active High signal has no overbar. To
assert SIGNAL is to drive it High; to deassert SIGNAL is to drive it Low.
Numbers
X
An uppercase X indicates any of several values is allowed, where X can be any legal pattern. For
example, a binary value of 0X00 can be either 0100 or 0000, a hex value of 0xX is 0x0 or 0x1, and
so on.
0x
Hexadecimal numbers have a prefix of 0x. For example, 0x00FF is the hexadecimal number FF.
All other numbers within register tables are assumed to be binary. Within conceptual information,
binary numbers are indicated with a b suffix, for example, 1011b, and decimal numbers are written
without a prefix or suffix.
July 25, 2011
29
Texas Instruments-Production Data
Architectural Overview
1
Architectural Overview
®
Texas Instruments is the industry leader in bringing 32-bit capabilities and the full benefits of ARM
Cortex™-M3-based microcontrollers to the broadest reach of the microcontroller market. For current
®
users of 8- and 16-bit MCUs, Stellaris with Cortex-M3 offers a direct path to the strongest ecosystem
of development tools, software and knowledge in the industry. Designers who migrate to Stellaris
benefit from great tools, small code footprint and outstanding performance. Even more important,
designers can enter the ARM ecosystem with full confidence in a compatible roadmap from $1 to
1 GHz. For users of current 32-bit MCUs, the Stellaris family offers the industry’s first implementation
of Cortex-M3 and the Thumb-2 instruction set. With blazingly-fast responsiveness, Thumb-2
technology combines both 16-bit and 32-bit instructions to deliver the best balance of code density
and performance. Thumb-2 uses 26 percent less memory than pure 32-bit code to reduce system
cost while delivering 25 percent better performance. The Texas Instruments Stellaris family of
microcontrollers—the first ARM Cortex-M3 based controllers—brings high-performance 32-bit
computing to cost-sensitive embedded microcontroller applications. These pioneering parts deliver
customers 32-bit performance at a cost equivalent to legacy 8- and 16-bit devices, all in a package
with a small footprint.
The LM3S1G58 microcontroller has the following features:
■ ARM Cortex-M3 Processor Core
– 80-MHz operation; 100 DMIPS performance
– ARM Cortex SysTick Timer
– Nested Vectored Interrupt Controller (NVIC)
■ On-Chip Memory
– 384 KB single-cycle Flash memory up to 50 MHz; a prefetch buffer improves performance
above 50 MHz
– 64 KB single-cycle SRAM
®
– Internal ROM loaded with StellarisWare software:
• Stellaris Peripheral Driver Library
• Stellaris Boot Loader
• Advanced Encryption Standard (AES) cryptography tables
• Cyclic Redundancy Check (CRC) error detection functionality
■ Advanced Serial Integration
– Three UARTs with IrDA and ISO 7816 support (one UART with modem flow control and
status)
– Two I2C modules
– Two Synchronous Serial Interface modules (SSI)
■ System Integration
– Direct Memory Access Controller (DMA)
30
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
– System control and clocks including on-chip precision 16-MHz oscillator
– Four 32-bit timers (up to eight 16-bit)
– Eight Capture Compare PWM pins (CCP)
– Lower-power battery-backed hibernation module
– Real-Time Clock in Hibernation module
– Two Watchdog Timers
• One timer runs off the main oscillator
• One timer runs off the precision internal oscillator
– Up to 60 GPIOs, depending on configuration
• Highly flexible pin muxing allows use as GPIO or one of several peripheral functions
• Independently configurable to 2, 4 or 8 mA drive capability
• Up to 4 GPIOs can have 18 mA drive capability
■ Analog
– Two 12-bit Analog-to-Digital Converters (ADC) with 16 analog input channels and a sample
rate of one million samples/second
– 16 digital comparators
– On-chip voltage regulator
■ JTAG and ARM Serial Wire Debug (SWD)
■ 100-pin LQFP package
■ 108-ball BGA package
■ Industrial (-40°C to 85°C) Temperature Range
The LM3S1G58 microcontroller is targeted for industrial applications, including remote monitoring,
electronic point-of-sale machines, test and measurement equipment, network appliances and
switches, factory automation, HVAC and building control, gaming equipment, and fire and security.
For applications requiring extreme conservation of power, the LM3S1G58 microcontroller features
a battery-backed Hibernation module to efficiently power down the LM3S1G58 to a low-power state
during extended periods of inactivity. With a power-up/power-down sequencer, a continuous time
counter (RTC), a pair of match registers, an APB interface to the system bus, and dedicated
non-volatile memory, the Hibernation module positions the LM3S1G58 microcontroller perfectly for
battery applications.
In addition, the LM3S1G58 microcontroller offers the advantages of ARM's widely available
development tools, System-on-Chip (SoC) infrastructure IP applications, and a large user community.
Additionally, the microcontroller uses ARM's Thumb®-compatible Thumb-2 instruction set to reduce
memory requirements and, thereby, cost. Finally, the LM3S1G58 microcontroller is code-compatible
to all members of the extensive Stellaris family; providing flexibility to fit our customers' precise
needs.
Texas Instruments offers a complete solution to get to market quickly, with evaluation and
development boards, white papers and application notes, an easy-to-use peripheral driver library,
July 25, 2011
31
Texas Instruments-Production Data
Architectural Overview
and a strong support, sales, and distributor network. See “Ordering and Contact
Information” on page 829 for ordering information for Stellaris family devices.
1.1
Functional Overview
The following sections provide an overview of the features of the LM3S1G58 microcontroller. The
page number in parentheses indicates where that feature is discussed in detail. Ordering and support
information can be found in “Ordering and Contact Information” on page 829.
1.1.1
ARM Cortex-M3
The following sections provide an overview of the ARM Cortex-M3 processor core and instruction
set, the integrated System Timer (SysTick) and the Nested Vectored Interrupt Controller.
1.1.1.1
Processor Core (see page 48)
All members of the Stellaris product family, including the LM3S1G58 microcontroller, are designed
around an ARM Cortex-M3 processor core. The ARM Cortex-M3 processor provides the core for a
high-performance, low-cost platform that meets the needs of minimal memory implementation,
reduced pin count, and low power consumption, while delivering outstanding computational
performance and exceptional system response to interrupts.
■ 32-bit ARM Cortex-M3 architecture optimized for small-footprint embedded applications
■ Outstanding processing performance combined with fast interrupt handling
■ Thumb-2 mixed 16-/32-bit instruction set delivers the high performance expected of a 32-bit
ARM core in a compact memory size usually associated with 8- and 16-bit devices, typically in
the range of a few kilobytes of memory for microcontroller-class applications
– Single-cycle multiply instruction and hardware divide
– Atomic bit manipulation (bit-banding), delivering maximum memory utilization and streamlined
peripheral control
– Unaligned data access, enabling data to be efficiently packed into memory
■ Fast code execution permits slower processor clock or increases sleep mode time
■ Harvard architecture characterized by separate buses for instruction and data
■ Efficient processor core, system and memories
■ Hardware division and fast multiplier
■ Deterministic, high-performance interrupt handling for time-critical applications
■ Memory protection unit (MPU) to provide a privileged mode for protected operating system
functionality
■ Enhanced system debug with extensive breakpoint and trace capabilities
■ Serial Wire Debug and Serial Wire Trace reduce the number of pins required for debugging and
tracing
■ Migration from the ARM7 processor family for better performance and power efficiency
32
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ Optimized for single-cycle Flash memory usage
■ Ultra-low power consumption with integrated sleep modes
■ 80-MHz operation
■ 1.25 DMIPS/MHz
1.1.1.2
Memory Map (see page 67)
A memory map lists the location of instructions and data in memory. The memory map for the
LM3S1G58 controller can be found in “Memory Model” on page 67. Register addresses are given
as a hexadecimal increment, relative to the module's base address as shown in the memory map.
1.1.1.3
System Timer (SysTick) (see page 90)
ARM Cortex-M3 includes an integrated system timer, SysTick. SysTick provides a simple, 24-bit,
clear-on-write, decrementing, wrap-on-zero counter with a flexible control mechanism. The counter
can be used in several different ways, for example:
■ An RTOS tick timer that fires at a programmable rate (for example, 100 Hz) and invokes a SysTick
routine
■ A high-speed alarm timer using the system clock
■ A variable rate alarm or signal timer—the duration is range-dependent on the reference clock
used and the dynamic range of the counter
■ A simple counter used to measure time to completion and time used
■ An internal clock-source control based on missing/meeting durations.
1.1.1.4
Nested Vectored Interrupt Controller (NVIC) (see page 91)
The LM3S1G58 controller includes the ARM Nested Vectored Interrupt Controller (NVIC). The NVIC
and Cortex-M3 prioritize and handle all exceptions in Handler Mode. The processor state is
automatically stored to the stack on an exception and automatically restored from the stack at the
end of the Interrupt Service Routine (ISR). The interrupt vector is fetched in parallel to the state
saving, enabling efficient interrupt entry. The processor supports tail-chaining, meaning that
back-to-back interrupts can be performed without the overhead of state saving and restoration.
Software can set eight priority levels on 7 exceptions (system handlers) and 37 interrupts.
■ Deterministic, fast interrupt processing: always 12 cycles, or just 6 cycles with tail-chaining
■ External non-maskable interrupt signal (NMI) available for immediate execution of NMI handler
for safety critical applications
■ Dynamically reprioritizable interrupts
■ Exceptional interrupt handling via hardware implementation of required register manipulations
1.1.1.5
System Control Block (SCB) (see page 93)
The SCB provides system implementation information and system control, including configuration,
control, and reporting of system exceptions.
July 25, 2011
33
Texas Instruments-Production Data
Architectural Overview
1.1.1.6
Memory Protection Unit (MPU) (see page 93)
The MPU supports the standard ARM7 Protected Memory System Architecture (PMSA) model. The
MPU provides full support for protection regions, overlapping protection regions, access permissions,
and exporting memory attributes to the system.
1.1.2
On-Chip Memory
The following sections describe the on-chip memory modules.
1.1.2.1
SRAM (see page 291)
The LM3S1G58 microcontroller provides 64 KB of single-cycle on-chip SRAM. The internal SRAM
of the Stellaris devices is located at offset 0x2000.0000 of the device memory map.
Because read-modify-write (RMW) operations are very time consuming, ARM has introduced
bit-banding technology in the Cortex-M3 processor. With a bit-band-enabled processor, certain
regions in the memory map (SRAM and peripheral space) can use address aliases to access
individual bits in a single, atomic operation.
Data can be transferred to and from the SRAM using the Micro Direct Memory Access Controller
(µDMA).
1.1.2.2
Flash Memory (see page 293)
The LM3S1G58 microcontroller provides 384 KB of single-cycle on-chip Flash memory (above 50
MHz, the Flash memory can be accessed in a single cycle as long as the code is linear; branches
incur a one-cycle stall). The Flash memory is organized as a set of 1-KB blocks that can be
individually erased. Erasing a block causes the entire contents of the block to be reset to all 1s.
These blocks are paired into a set of 2-KB blocks that can be individually protected. The blocks can
be marked as read-only or execute-only, providing different levels of code protection. Read-only
blocks cannot be erased or programmed, protecting the contents of those blocks from being modified.
Execute-only blocks cannot be erased or programmed, and can only be read by the controller
instruction fetch mechanism, protecting the contents of those blocks from being read by either the
controller or by a debugger.
1.1.2.3
ROM (see page 291)
The LM3S1G58 ROM is preprogrammed with the following software and programs:
■ Stellaris Peripheral Driver Library
■ Stellaris Boot Loader
■ Advanced Encryption Standard (AES) cryptography tables
■ Cyclic Redundancy Check (CRC) error-detection functionality
The Stellaris Peripheral Driver Library is a royalty-free software library for controlling on-chip
peripherals with a boot-loader capability. The library performs both peripheral initialization and
control functions, with a choice of polled or interrupt-driven peripheral support. In addition, the library
is designed to take full advantage of the stellar interrupt performance of the ARM Cortex-M3 core.
No special pragmas or custom assembly code prologue/epilogue functions are required. For
applications that require in-field programmability, the royalty-free Stellaris Boot Loader can act as
an application loader and support in-field firmware updates.
34
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
The Advanced Encryption Standard (AES) is a publicly defined encryption standard used by the
U.S. Government. AES is a strong encryption method with reasonable performance and size. In
addition, it is fast in both hardware and software, is fairly easy to implement, and requires little
memory. The Texas Instruments encryption package is available with full source code, and is based
on lesser general public license (LGPL) source. An LGPL means that the code can be used within
an application without any copyleft implications for the application (the code does not automatically
become open source). Modifications to the package source, however, must be open source.
CRC (Cyclic Redundancy Check) is a technique to validate a span of data has the same contents
as when previously checked. This technique can be used to validate correct receipt of messages
(nothing lost or modified in transit), to validate data after decompression, to validate that Flash
memory contents have not been changed, and for other cases where the data needs to be validated.
A CRC is preferred over a simple checksum (e.g. XOR all bits) because it catches changes more
readily.
1.1.3
Serial Communications Peripherals
The LM3S1G58 controller supports both asynchronous and synchronous serial communications
with:
■ Three UARTs with IrDA and ISO 7816 support (one UART with modem flow control and status)
■ Two I2C modules
■ Two Synchronous Serial Interface modules (SSI)
The following sections provide more detail on each of these communications functions.
1.1.3.1
UART (see page 598)
A Universal Asynchronous Receiver/Transmitter (UART) is an integrated circuit used for RS-232C
serial communications, containing a transmitter (parallel-to-serial converter) and a receiver
(serial-to-parallel converter), each clocked separately.
The LM3S1G58 microcontroller includes three fully programmable 16C550-type UARTs. Although
the functionality is similar to a 16C550 UART, this UART design is not register compatible. The
UART can generate individually masked interrupts from the Rx, Tx, modem flow control, modem
status, and error conditions. The module generates a single combined interrupt when any of the
interrupts are asserted and are unmasked.
The three UARTs have the following features:
■ Programmable baud-rate generator allowing speeds up to 5 Mbps for regular speed (divide by
16) and 10 Mbps for high speed (divide by 8)
■ Separate 16x8 transmit (TX) and receive (RX) FIFOs to reduce CPU interrupt service loading
■ Programmable FIFO length, including 1-byte deep operation providing conventional
double-buffered interface
■ FIFO trigger levels of 1/8, 1/4, 1/2, 3/4, and 7/8
■ Standard asynchronous communication bits for start, stop, and parity
■ Line-break generation and detection
■ Fully programmable serial interface characteristics
July 25, 2011
35
Texas Instruments-Production Data
Architectural Overview
– 5, 6, 7, or 8 data bits
– Even, odd, stick, or no-parity bit generation/detection
– 1 or 2 stop bit generation
■ IrDA serial-IR (SIR) encoder/decoder providing
– Programmable use of IrDA Serial Infrared (SIR) or UART input/output
– Support of IrDA SIR encoder/decoder functions for data rates up to 115.2 Kbps half-duplex
– Support of normal 3/16 and low-power (1.41-2.23 μs) bit durations
– Programmable internal clock generator enabling division of reference clock by 1 to 256 for
low-power mode bit duration
■ Support for communication with ISO 7816 smart cards
■ Full modem handshake support (on UART1)
■ LIN protocol support
■ Standard FIFO-level and End-of-Transmission interrupts
■ Efficient transfers using Micro Direct Memory Access Controller (µDMA)
– Separate channels for transmit and receive
– Receive single request asserted when data is in the FIFO; burst request asserted at
programmed FIFO level
– Transmit single request asserted when there is space in the FIFO; burst request asserted at
programmed FIFO level
1.1.3.2
I2C (see page 701)
The Inter-Integrated Circuit (I2C) bus provides bi-directional data transfer through a two-wire design
(a serial data line SDA and a serial clock line SCL). The I2C bus interfaces to external I2C devices
such as serial memory (RAMs and ROMs), networking devices, LCDs, tone generators, and so on.
The I2C bus may also be used for system testing and diagnostic purposes in product development
and manufacture.
Each device on the I2C bus can be designated as either a master or a slave. Each I2C module
supports both sending and receiving data as either a master or a slave and can operate
simultaneously as both a master and a slave. Both the I2C master and slave can generate interrupts.
The LM3S1G58 microcontroller includes two I2C modules with the following features:
■ Devices on the I2C bus can be designated as either a master or a slave
– Supports both transmitting and receiving data as either a master or a slave
– Supports simultaneous master and slave operation
■ Four I2C modes
36
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
– Master transmit
– Master receive
– Slave transmit
– Slave receive
■ Two transmission speeds: Standard (100 Kbps) and Fast (400 Kbps)
■ Master and slave interrupt generation
– Master generates interrupts when a transmit or receive operation completes (or aborts due
to an error)
– Slave generates interrupts when data has been transferred or requested by a master or when
a START or STOP condition is detected
■ Master with arbitration and clock synchronization, multimaster support, and 7-bit addressing
mode
1.1.3.3
SSI (see page 659)
Synchronous Serial Interface (SSI) is a four-wire bi-directional communications interface that converts
data between parallel and serial. The SSI module performs serial-to-parallel conversion on data
received from a peripheral device, and parallel-to-serial conversion on data transmitted to a peripheral
device. The SSI module can be configured as either a master or slave device. As a slave device,
the SSI module can also be configured to disable its output, which allows a master device to be
coupled with multiple slave devices. The TX and RX paths are buffered with separate internal FIFOs.
The SSI module also includes a programmable bit rate clock divider and prescaler to generate the
output serial clock derived from the SSI module's input clock. Bit rates are generated based on the
input clock and the maximum bit rate is determined by the connected peripheral.
The LM3S1G58 microcontroller includes two SSI modules with the following features:
■ Programmable interface operation for Freescale SPI, MICROWIRE, or Texas Instruments
synchronous serial interfaces
■ Master or slave operation
■ Programmable clock bit rate and prescaler
■ Separate transmit and receive FIFOs, each 16 bits wide and 8 locations deep
■ Programmable data frame size from 4 to 16 bits
■ Internal loopback test mode for diagnostic/debug testing
■ Standard FIFO-based interrupts and End-of-Transmission interrupt
■ Efficient transfers using Micro Direct Memory Access Controller (µDMA)
– Separate channels for transmit and receive
– Receive single request asserted when data is in the FIFO; burst request asserted when FIFO
contains 4 entries
July 25, 2011
37
Texas Instruments-Production Data
Architectural Overview
– Transmit single request asserted when there is space in the FIFO; burst request asserted
when FIFO contains 4 entries
1.1.4
System Integration
The LM3S1G58 microcontroller provides a variety of standard system functions integrated into the
device, including:
■ Direct Memory Access Controller (DMA)
■ System control and clocks including on-chip precision 16-MHz oscillator
■ Four 32-bit timers (up to eight 16-bit)
■ Eight Capture Compare PWM pins (CCP)
■ Lower-power battery-backed hibernation module
■ Real-Time Clock in Hibernation module
■ Two Watchdog Timers
– One timer runs off the main oscillator
– One timer runs off the precision internal oscillator
■ Up to 60 GPIOs, depending on configuration
– Highly flexible pin muxing allows use as GPIO or one of several peripheral functions
– Independently configurable to 2, 4 or 8 mA drive capability
– Up to 4 GPIOs can have 18 mA drive capability
The following sections provide more detail on each of these functions.
1.1.4.1
Direct Memory Access (see page 335)
The LM3S1G58 microcontroller includes a Direct Memory Access (DMA) controller, known as
micro-DMA (μDMA). The μDMA controller provides a way to offload data transfer tasks from the
Cortex-M3 processor, allowing for more efficient use of the processor and the available bus
bandwidth. The μDMA controller can perform transfers between memory and peripherals. It has
dedicated channels for each supported on-chip module and can be programmed to automatically
perform transfers between peripherals and memory as the peripheral is ready to transfer more data.
The μDMA controller provides the following features:
®
■ ARM PrimeCell 32-channel configurable µDMA controller
■ Support for memory-to-memory, memory-to-peripheral, and peripheral-to-memory in multiple
transfer modes
– Basic for simple transfer scenarios
– Ping-pong for continuous data flow
– Scatter-gather for a programmable list of arbitrary transfers initiated from a single request
■ Highly flexible and configurable channel operation
– Independently configured and operated channels
38
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
– Dedicated channels for supported on-chip modules
– Primary and secondary channel assignments
– One channel each for receive and transmit path for bidirectional modules
– Dedicated channel for software-initiated transfers
– Per-channel configurable priority scheme
– Optional software-initiated requests for any channel
■ Two levels of priority
■ Design optimizations for improved bus access performance between µDMA controller and the
processor core
– µDMA controller access is subordinate to core access
– RAM striping
– Peripheral bus segmentation
■ Data sizes of 8, 16, and 32 bits
■ Transfer size is programmable in binary steps from 1 to 1024
■ Source and destination address increment size of byte, half-word, word, or no increment
■ Maskable peripheral requests
■ Interrupt on transfer completion, with a separate interrupt per channel
1.1.4.2
System Control and Clocks (see page 168)
System control determines the overall operation of the device. It provides information about the
device, controls power-saving features, controls the clocking of the device and individual peripherals,
and handles reset detection and reporting.
■ Device identification information: version, part number, SRAM size, Flash memory size, and so
on
■ Power control
– On-chip fixed Low Drop-Out (LDO) voltage regulator
– Hibernation module handles the power-up/down 3.3 V sequencing and control for the core
digital logic and analog circuits
– Low-power options for microcontroller: Sleep and Deep-sleep modes with clock gating
– Low-power options for on-chip modules: software controls shutdown of individual peripherals
and memory
– 3.3-V supply brown-out detection and reporting via interrupt or reset
■ Multiple clock sources for microcontroller system clock
July 25, 2011
39
Texas Instruments-Production Data
Architectural Overview
– Precision Oscillator (PIOSC): On-chip resource providing a 16 MHz ±1% frequency at room
temperature
• 16 MHz ±3% across temperature
• Can be recalibrated with 7-bit trim resolution
• Software power down control for low power modes
– Main Oscillator (MOSC): A frequency-accurate clock source by one of two means: an external
single-ended clock source is connected to the OSC0 input pin, or an external crystal is
connected across the OSC0 input and OSC1 output pins.
• External crystal used with or without on-chip PLL: select supported frequencies from 1
MHz to 16.384 MHz.
• External oscillator: from DC to maximum device speed
– Internal 30-kHz Oscillator: on chip resource providing a 30 kHz ± 50% frequency, used during
power-saving modes
– 32.768-kHz external oscillator for the Hibernation Module: eliminates need for additional
crystal for main clock source
■ Flexible reset sources
– Power-on reset (POR)
– Reset pin assertion
– Brown-out reset (BOR) detector alerts to system power drops
– Software reset
– Watchdog timer reset
– MOSC failure
1.1.4.3
Programmable Timers (see page 449)
Programmable timers can be used to count or time external events that drive the Timer input pins.
Each GPTM block provides two 16-bit timers/counters that can be configured to operate independently
as timers or event counters, or configured to operate as one 32-bit timer or one 32-bit Real-Time
Clock (RTC). Timers can also be used to trigger analog-to-digital (ADC) conversions.
The General-Purpose Timer Module (GPTM) contains four GPTM blocks with the following functional
options:
■ Operating modes:
– 16- or 32-bit programmable one-shot timer
– 16- or 32-bit programmable periodic timer
– 16-bit general-purpose timer with an 8-bit prescaler
– 32-bit Real-Time Clock (RTC) when using an external 32.768-KHz clock as the input
– 16-bit input-edge count- or time-capture modes
– 16-bit PWM mode with software-programmable output inversion of the PWM signal
40
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ Count up or down
■ Daisy chaining of timer modules to allow a single timer to initiate multiple timing events
■ ADC event trigger
■ User-enabled stalling when the microcontroller asserts CPU Halt flag during debug (excluding
RTC mode)
■ Ability to determine the elapsed time between the assertion of the timer interrupt and entry into
the interrupt service routine.
■ Efficient transfers using Micro Direct Memory Access Controller (µDMA)
– Dedicated channel for each timer
– Burst request generated on timer interrupt
1.1.4.4
CCP Pins (see page 456)
Capture Compare PWM pins (CCP) can be used by the General-Purpose Timer Module to time/count
external events using the CCP pin as an input. Alternatively, the GPTM can generate a simple PWM
output on the CCP pin.
The LM3S1G58 microcontroller includes eight Capture Compare PWM pins (CCP) that can be
programmed to operate in the following modes:
■ Capture: The GP Timer is incremented/decremented by programmed events on the CCP input.
The GP Timer captures and stores the current timer value when a programmed event occurs.
■ Compare: The GP Timer is incremented/decremented by programmed events on the CCP input.
The GP Timer compares the current value with a stored value and generates an interrupt when
a match occurs.
■ PWM: The GP Timer is incremented/decremented by the system clock. A PWM signal is generated
based on a match between the counter value and a value stored in a match register and is output
on the CCP pin.
1.1.4.5
Hibernation Module (see page 263)
The Hibernation module provides logic to switch power off to the main processor and peripherals
and to wake on external or time-based events. The Hibernation module includes power-sequencing
logic and has the following features:
■ 32-bit real-time counter (RTC)
– Two 32-bit RTC match registers for timed wake-up and interrupt generation
– RTC predivider trim for making fine adjustments to the clock rate
■ Two mechanisms for power control
– System power control using discrete external regulator
– On-chip power control using internal switches under register control
■ Dedicated pin for waking using an external signal
July 25, 2011
41
Texas Instruments-Production Data
Architectural Overview
■ RTC operational and hibernation memory valid as long as VBAT is valid
■ Low-battery detection, signaling, and interrupt generation
■ Clock source from a 32.768-kHz external oscillator or a 4.194304-MHz crystal; 32.768-kHz
external oscillator can be used for main controller clock
■ 64 32-bit words of non-volatile memory to save state during hibernation
■ Programmable interrupts for RTC match, external wake, and low battery events
1.1.4.6
Watchdog Timers (see page 495)
A watchdog timer is used to regain control when a system has failed due to a software error or to
the failure of an external device to respond in the expected way. The Stellaris Watchdog Timer can
generate an interrupt or a reset when a time-out value is reached. In addition, the Watchdog Timer
is ARM FiRM-compliant and can be configured to generate an interrupt to the microcontroller on its
first time-out, and to generate a reset signal on its second time-out. Once the Watchdog Timer has
been configured, the lock register can be written to prevent the timer configuration from being
inadvertently altered.
The LM3S1G58 microcontroller has two Watchdog Timer modules: Watchdog Timer 0 uses the
system clock for its timer clock; Watchdog Timer 1 uses the PIOSC as its timer clock. The Stellaris
Watchdog Timer module has the following features:
■ 32-bit down counter with a programmable load register
■ Separate watchdog clock with an enable
■ Programmable interrupt generation logic with interrupt masking
■ Lock register protection from runaway software
■ Reset generation logic with an enable/disable
■ User-enabled stalling when the microcontroller asserts the CPU Halt flag during debug
1.1.4.7
Programmable GPIOs (see page 395)
General-purpose input/output (GPIO) pins offer flexibility for a variety of connections. The Stellaris
GPIO module is comprised of eight physical GPIO blocks, each corresponding to an individual GPIO
port. The GPIO module is FiRM-compliant (compliant to the ARM Foundation IP for Real-Time
Microcontrollers specification) and supports 0-60 programmable input/output pins. The number of
GPIOs available depends on the peripherals being used (see “Signal Tables” on page 740 for the
signals available to each GPIO pin).
■ Up to 60 GPIOs, depending on configuration
■ Highly flexible pin muxing allows use as GPIO or one of several peripheral functions
■ 5-V-tolerant in input configuration
■ Fast toggle capable of a change every two clock cycles
42
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ Two means of port access: either Advanced High-Performance Bus (AHB) with better back-to-back
access performance, or the legacy Advanced Peripheral Bus (APB) for backwards-compatibility
with existing code
■ Programmable control for GPIO interrupts
– Interrupt generation masking
– Edge-triggered on rising, falling, or both
– Level-sensitive on High or Low values
■ Bit masking in both read and write operations through address lines
■ Can be used to initiate an ADC sample sequence
■ Pins configured as digital inputs are Schmitt-triggered
■ Programmable control for GPIO pad configuration
– Weak pull-up or pull-down resistors
– 2-mA, 4-mA, and 8-mA pad drive for digital communication; up to four pads can sink 18-mA
for high-current applications
– Slew rate control for the 8-mA drive
– Open drain enables
– Digital input enables
1.1.5
Analog
The LM3S1G58 microcontroller provides analog functions integrated into the device, including:
■ Two 12-bit Analog-to-Digital Converters (ADC) with 16 analog input channels and a sample rate
of one million samples/second
■ 16 digital comparators
■ On-chip voltage regulator
The following provides more detail on these analog functions.
1.1.5.1
ADC (see page 520)
An analog-to-digital converter (ADC) is a peripheral that converts a continuous analog voltage to a
discrete digital number. The Stellaris ADC module features 12-bit conversion resolution and supports
16 input channels plus an internal temperature sensor. Four buffered sample sequencers allow
rapid sampling of up to 16 analog input sources without controller intervention. Each sample
sequencer provides flexible programming with fully configurable input source, trigger events, interrupt
generation, and sequencer priority. Each ADC module has a digital comparator function that allows
the conversion value to be diverted to a comparison unit that provides eight digital comparators.
The LM3S1G58 microcontroller provides two ADC modules with the following features:
■ 16 shared analog input channels
July 25, 2011
43
Texas Instruments-Production Data
Architectural Overview
■ 12-bit precision ADC with an accurate 10-bit data compatibility mode
■ Single-ended and differential-input configurations
■ On-chip internal temperature sensor
■ Maximum sample rate of one million samples/second
■ Optional phase shift in sample time programmable from 22.5º to 337.5º
■ Four programmable sample conversion sequencers from one to eight entries long, with
corresponding conversion result FIFOs
■ Flexible trigger control
– Controller (software)
– Timers
– GPIO
■ Hardware averaging of up to 64 samples
■ Digital comparison unit providing eight digital comparators
■ Converter uses an internal 3-V reference or an external reference
■ Power and ground for the analog circuitry is separate from the digital power and ground
■ Efficient transfers using Micro Direct Memory Access Controller (µDMA)
– Dedicated channel for each sample sequencer
– ADC module uses burst requests for DMA
1.1.6
JTAG and ARM Serial Wire Debug (see page 156)
The Joint Test Action Group (JTAG) port is an IEEE standard that defines a Test Access Port and
Boundary Scan Architecture for digital integrated circuits and provides a standardized serial interface
for controlling the associated test logic. The TAP, Instruction Register (IR), and Data Registers (DR)
can be used to test the interconnections of assembled printed circuit boards and obtain manufacturing
information on the components. The JTAG Port also provides a means of accessing and controlling
design-for-test features such as I/O pin observation and control, scan testing, and debugging. Texas
Instruments replaces the ARM SW-DP and JTAG-DP with the ARM Serial Wire JTAG Debug Port
(SWJ-DP) interface. The SWJ-DP interface combines the SWD and JTAG debug ports into one
module providing all the normal JTAG debug and test functionality plus real-time access to system
memory without halting the core or requiring any target resident code. The SWJ-DP interface has
the following features:
■ IEEE 1149.1-1990 compatible Test Access Port (TAP) controller
■ Four-bit Instruction Register (IR) chain for storing JTAG instructions
■ IEEE standard instructions: BYPASS, IDCODE, SAMPLE/PRELOAD, EXTEST and INTEST
■ ARM additional instructions: APACC, DPACC and ABORT
44
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ Integrated ARM Serial Wire Debug (SWD)
– Serial Wire JTAG Debug Port (SWJ-DP)
– Flash Patch and Breakpoint (FPB) unit for implementing breakpoints
– Data Watchpoint and Trace (DWT) unit for implementing watchpoints, trigger resources, and
system profiling
– Instrumentation Trace Macrocell (ITM) for support of printf style debugging
– Trace Port Interface Unit (TPIU) for bridging to a Trace Port Analyzer
1.1.7
Packaging and Temperature
■ Industrial-range 100-pin RoHS-compliant LQFP package
■ Industrial-range 108-ball RoHS-compliant BGA package
1.2
Target Applications
The Stellaris family is positioned for cost-conscious applications requiring significant control
processing and connectivity capabilities such as:
■ Test and measurement equipment
■ Factory automation
■ HVAC and building control
■ Gaming equipment
■ Motion control
■ Medical instrumentation
■ Fire and security
■ Power and energy
■ Transportation
1.3
High-Level Block Diagram
Figure 1-1 on page 46 depicts the features on the Stellaris LM3S1G58 microcontroller. Note that
there are two on-chip buses that connect the core to the peripherals. The Advanced Peripheral Bus
(APB) bus is the legacy bus. The Advanced High-Performance Bus (AHB) bus provides better
back-to-back access performance than the APB bus.
July 25, 2011
45
Texas Instruments-Production Data
Architectural Overview
Figure 1-1. Stellaris LM3S1G58 Microcontroller High-Level Block Diagram
JTAG/SWD
ARM®
Cortex™-M3
ROM
(80 MHz)
System
Control and
Clocks
(w/ Precis. Osc.)
Flash
(384 KB)
DCode bus
NVIC
Boot Loader
DriverLib
AES & CRC
MPU
ICode bus
System Bus
LM3S1G58
Bus Matrix
SRAM
(64 KB)
SYSTEM PERIPHERALS
GeneralPurpose
Timers (4)
Hibernation
Module
I2C
(2)
Advanced Peripheral Bus (APB)
Watchdog
Timers
(2)
Advanced High-Performance Bus (AHB)
DMA
GPIOs
(60)
SERIAL PERIPHERALS
UARTs
(3)
SSI
(2)
ANALOG PERIPHERALS
12-Bit ADC
Channels
(16)
46
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
1.4
Hardware Details
Details on the pins and package can be found in the following sections:
■ “Pin Diagram” on page 738
■ “Signal Tables” on page 740
■ “Operating Characteristics” on page 784
■ “Electrical Characteristics” on page 785
■ “Package Information” on page 831
July 25, 2011
47
Texas Instruments-Production Data
The Cortex-M3 Processor
2
The Cortex-M3 Processor
The ARM® Cortex™-M3 processor provides a high-performance, low-cost platform that meets the
system requirements of minimal memory implementation, reduced pin count, and low power
consumption, while delivering outstanding computational performance and exceptional system
response to interrupts. Features include:
®
■ 32-bit ARM Cortex™-M3 architecture optimized for small-footprint embedded applications
■ Outstanding processing performance combined with fast interrupt handling
■ Thumb-2 mixed 16-/32-bit instruction set delivers the high performance expected of a 32-bit
ARM core in a compact memory size usually associated with 8- and 16-bit devices, typically in
the range of a few kilobytes of memory for microcontroller-class applications
– Single-cycle multiply instruction and hardware divide
– Atomic bit manipulation (bit-banding), delivering maximum memory utilization and streamlined
peripheral control
– Unaligned data access, enabling data to be efficiently packed into memory
■ Fast code execution permits slower processor clock or increases sleep mode time
■ Harvard architecture characterized by separate buses for instruction and data
■ Efficient processor core, system and memories
■ Hardware division and fast multiplier
■ Deterministic, high-performance interrupt handling for time-critical applications
■ Memory protection unit (MPU) to provide a privileged mode for protected operating system
functionality
■ Enhanced system debug with extensive breakpoint and trace capabilities
■ Serial Wire Debug and Serial Wire Trace reduce the number of pins required for debugging and
tracing
■ Migration from the ARM7 processor family for better performance and power efficiency
■ Optimized for single-cycle Flash memory usage
■ Ultra-low power consumption with integrated sleep modes
■ 80-MHz operation
■ 1.25 DMIPS/MHz
®
The Stellaris family of microcontrollers builds on this core to bring high-performance 32-bit computing
to cost-sensitive embedded microcontroller applications, such as factory automation and control,
industrial control power devices, building and home automation, and stepper motor control.
48
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
This chapter provides information on the Stellaris implementation of the Cortex-M3 processor,
including the programming model, the memory model, the exception model, fault handling, and
power management.
For technical details on the instruction set, see the Cortex™-M3 Instruction Set Technical User's
Manual.
2.1
Block Diagram
The Cortex-M3 processor is built on a high-performance processor core, with a 3-stage pipeline
Harvard architecture, making it ideal for demanding embedded applications. The processor delivers
exceptional power efficiency through an efficient instruction set and extensively optimized design,
providing high-end processing hardware including single-cycle 32x32 multiplication and dedicated
hardware division.
To facilitate the design of cost-sensitive devices, the Cortex-M3 processor implements tightly coupled
system components that reduce processor area while significantly improving interrupt handling and
system debug capabilities. The Cortex-M3 processor implements a version of the Thumb® instruction
set, ensuring high code density and reduced program memory requirements. The Cortex-M3
instruction set provides the exceptional performance expected of a modern 32-bit architecture, with
the high code density of 8-bit and 16-bit microcontrollers.
The Cortex-M3 processor closely integrates a nested interrupt controller (NVIC), to deliver
industry-leading interrupt performance. The Stellaris NVIC includes a non-maskable interrupt (NMI)
and provides eight interrupt priority levels. The tight integration of the processor core and NVIC
provides fast execution of interrupt service routines (ISRs), dramatically reducing interrupt latency.
The hardware stacking of registers and the ability to suspend load-multiple and store-multiple
operations further reduce interrupt latency. Interrupt handlers do not require any assembler stubs
which removes code overhead from the ISRs. Tail-chaining optimization also significantly reduces
the overhead when switching from one ISR to another. To optimize low-power designs, the NVIC
integrates with the sleep modes, including Deep-sleep mode, which enables the entire device to be
rapidly powered down.
July 25, 2011
49
Texas Instruments-Production Data
The Cortex-M3 Processor
Figure 2-1. CPU Block Diagram
Nested
Vectored
Interrupt
Controller
Interrupts
Sleep
ARM
Cortex-M3
CM3 Core
Debug
Instructions
Data
Trace
Port
Interface
Unit
Memory
Protection
Unit
Flash
Patch and
Breakpoint
Instrumentation
Data
Watchpoint Trace Macrocell
and Trace
ROM
Table
Private Peripheral
Bus
(internal)
Adv. Peripheral
Bus
Bus
Matrix
Serial Wire JTAG
Debug Port
Debug
Access Port
2.2
Overview
2.2.1
System-Level Interface
Serial
Wire
Output
Trace
Port
(SWO)
I-code bus
D-code bus
System bus
The Cortex-M3 processor provides multiple interfaces using AMBA® technology to provide
high-speed, low-latency memory accesses. The core supports unaligned data accesses and
implements atomic bit manipulation that enables faster peripheral controls, system spinlocks, and
thread-safe Boolean data handling.
The Cortex-M3 processor has a memory protection unit (MPU) that provides fine-grain memory
control, enabling applications to implement security privilege levels and separate code, data and
stack on a task-by-task basis.
2.2.2
Integrated Configurable Debug
The Cortex-M3 processor implements a complete hardware debug solution, providing high system
visibility of the processor and memory through either a traditional JTAG port or a 2-pin Serial Wire
Debug (SWD) port that is ideal for microcontrollers and other small package devices. The Stellaris
implementation replaces the ARM SW-DP and JTAG-DP with the ARM CoreSight™-compliant
Serial Wire JTAG Debug Port (SWJ-DP) interface. The SWJ-DP interface combines the SWD and
JTAG debug ports into one module. See the ARM® Debug Interface V5 Architecture Specification
for details on SWJ-DP.
For system trace, the processor integrates an Instrumentation Trace Macrocell (ITM) alongside data
watchpoints and a profiling unit. To enable simple and cost-effective profiling of the system trace
events, a Serial Wire Viewer (SWV) can export a stream of software-generated messages, data
trace, and profiling information through a single pin.
50
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
The Flash Patch and Breakpoint Unit (FPB) provides up to eight hardware breakpoint comparators
that debuggers can use. The comparators in the FPB also provide remap functions of up to eight
words in the program code in the CODE memory region. This enables applications stored in a
read-only area of Flash memory to be patched in another area of on-chip SRAM or Flash memory.
If a patch is required, the application programs the FPB to remap a number of addresses. When
those addresses are accessed, the accesses are redirected to a remap table specified in the FPB
configuration.
For more information on the Cortex-M3 debug capabilities, see theARM® Debug Interface V5
Architecture Specification.
2.2.3
Trace Port Interface Unit (TPIU)
The TPIU acts as a bridge between the Cortex-M3 trace data from the ITM, and an off-chip Trace
Port Analyzer, as shown in Figure 2-2 on page 51.
Figure 2-2. TPIU Block Diagram
2.2.4
Debug
ATB
Slave
Port
ATB
Interface
APB
Slave
Port
APB
Interface
Asynchronous FIFO
Trace Out
(serializer)
Serial Wire
Trace Port
(SWO)
Cortex-M3 System Component Details
The Cortex-M3 includes the following system components:
■ SysTick
A 24-bit count-down timer that can be used as a Real-Time Operating System (RTOS) tick timer
or as a simple counter (see “System Timer (SysTick)” on page 90).
■ Nested Vectored Interrupt Controller (NVIC)
An embedded interrupt controller that supports low latency interrupt processing (see “Nested
Vectored Interrupt Controller (NVIC)” on page 91).
■ System Control Block (SCB)
July 25, 2011
51
Texas Instruments-Production Data
The Cortex-M3 Processor
The programming model interface to the processor. The SCB provides system implementation
information and system control, including configuration, control, and reporting of system
exceptions( see “System Control Block (SCB)” on page 93).
■ Memory Protection Unit (MPU)
Improves system reliability by defining the memory attributes for different memory regions. The
MPU provides up to eight different regions and an optional predefined background region (see
“Memory Protection Unit (MPU)” on page 93).
2.3
Programming Model
This section describes the Cortex-M3 programming model. In addition to the individual core register
descriptions, information about the processor modes and privilege levels for software execution and
stacks is included.
2.3.1
Processor Mode and Privilege Levels for Software Execution
The Cortex-M3 has two modes of operation:
■ Thread mode
Used to execute application software. The processor enters Thread mode when it comes out of
reset.
■ Handler mode
Used to handle exceptions. When the processor has finished exception processing, it returns to
Thread mode.
In addition, the Cortex-M3 has two privilege levels:
■ Unprivileged
In this mode, software has the following restrictions:
– Limited access to the MSR and MRS instructions and no use of the CPS instruction
– No access to the system timer, NVIC, or system control block
– Possibly restricted access to memory or peripherals
■ Privileged
In this mode, software can use all the instructions and has access to all resources.
In Thread mode, the CONTROL register (see page 66) controls whether software execution is
privileged or unprivileged. In Handler mode, software execution is always privileged.
Only privileged software can write to the CONTROL register to change the privilege level for software
execution in Thread mode. Unprivileged software can use the SVC instruction to make a supervisor
call to transfer control to privileged software.
2.3.2
Stacks
The processor uses a full descending stack, meaning that the stack pointer indicates the last stacked
item on the stack memory. When the processor pushes a new item onto the stack, it decrements
the stack pointer and then writes the item to the new memory location. The processor implements
52
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
two stacks: the main stack and the process stack, with independent copies of the stack pointer (see
the SP register on page 56).
In Thread mode, the CONTROL register (see page 66) controls whether the processor uses the
main stack or the process stack. In Handler mode, the processor always uses the main stack. The
options for processor operations are shown in Table 2-1 on page 53.
Table 2-1. Summary of Processor Mode, Privilege Level, and Stack Use
Processor Mode
Use
Privilege Level
Thread
Applications
Privileged or unprivileged
Stack Used
Handler
Exception handlers
Always privileged
a
Main stack or process stack
a
Main stack
a. See CONTROL (page 66).
2.3.3
Register Map
Figure 2-3 on page 53 shows the Cortex-M3 register set. Table 2-2 on page 54 lists the Core
registers. The core registers are not memory mapped and are accessed by register name, so the
base address is n/a (not applicable) and there is no offset.
Figure 2-3. Cortex-M3 Register Set
R0
R1
R2
Low registers
R3
R4
R5
R6
General-purpose registers
R7
R8
R9
High registers
R10
R11
R12
Stack Pointer
SP (R13)
Link Register
LR (R14)
Program Counter
PC (R15)
PSR
PSP‡
MSP‡
‡
Banked version of SP
Program status register
PRIMASK
FAULTMASK
Exception mask registers
Special registers
BASEPRI
CONTROL
CONTROL register
July 25, 2011
53
Texas Instruments-Production Data
The Cortex-M3 Processor
Table 2-2. Processor Register Map
Offset
Type
Reset
-
R0
R/W
-
Cortex General-Purpose Register 0
55
-
R1
R/W
-
Cortex General-Purpose Register 1
55
-
R2
R/W
-
Cortex General-Purpose Register 2
55
-
R3
R/W
-
Cortex General-Purpose Register 3
55
-
R4
R/W
-
Cortex General-Purpose Register 4
55
-
R5
R/W
-
Cortex General-Purpose Register 5
55
-
R6
R/W
-
Cortex General-Purpose Register 6
55
-
R7
R/W
-
Cortex General-Purpose Register 7
55
-
R8
R/W
-
Cortex General-Purpose Register 8
55
-
R9
R/W
-
Cortex General-Purpose Register 9
55
-
R10
R/W
-
Cortex General-Purpose Register 10
55
-
R11
R/W
-
Cortex General-Purpose Register 11
55
-
R12
R/W
-
Cortex General-Purpose Register 12
55
-
SP
R/W
-
Stack Pointer
56
-
LR
R/W
0xFFFF.FFFF
Link Register
57
-
PC
R/W
-
Program Counter
58
-
PSR
R/W
0x0100.0000
Program Status Register
59
-
PRIMASK
R/W
0x0000.0000
Priority Mask Register
63
-
FAULTMASK
R/W
0x0000.0000
Fault Mask Register
64
-
BASEPRI
R/W
0x0000.0000
Base Priority Mask Register
65
-
CONTROL
R/W
0x0000.0000
Control Register
66
2.3.4
Description
See
page
Name
Register Descriptions
This section lists and describes the Cortex-M3 registers, in the order shown in Figure 2-3 on page 53.
The core registers are not memory mapped and are accessed by register name rather than offset.
Note:
The register type shown in the register descriptions refers to type during program execution
in Thread mode and Handler mode. Debug access can differ.
54
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 1: Cortex General-Purpose Register 0 (R0)
Register 2: Cortex General-Purpose Register 1 (R1)
Register 3: Cortex General-Purpose Register 2 (R2)
Register 4: Cortex General-Purpose Register 3 (R3)
Register 5: Cortex General-Purpose Register 4 (R4)
Register 6: Cortex General-Purpose Register 5 (R5)
Register 7: Cortex General-Purpose Register 6 (R6)
Register 8: Cortex General-Purpose Register 7 (R7)
Register 9: Cortex General-Purpose Register 8 (R8)
Register 10: Cortex General-Purpose Register 9 (R9)
Register 11: Cortex General-Purpose Register 10 (R10)
Register 12: Cortex General-Purpose Register 11 (R11)
Register 13: Cortex General-Purpose Register 12 (R12)
The Rn registers are 32-bit general-purpose registers for data operations and can be accessed
from either privileged or unprivileged mode.
Cortex General-Purpose Register 0 (R0)
Type R/W, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
DATA
Type
Reset
DATA
Type
Reset
Bit/Field
Name
Type
Reset
31:0
DATA
R/W
-
Description
Register data.
July 25, 2011
55
Texas Instruments-Production Data
The Cortex-M3 Processor
Register 14: Stack Pointer (SP)
The Stack Pointer (SP) is register R13. In Thread mode, the function of this register changes
depending on the ASP bit in the Control Register (CONTROL) register. When the ASP bit is clear,
this register is the Main Stack Pointer (MSP). When the ASP bit is set, this register is the Process
Stack Pointer (PSP). On reset, the ASP bit is clear, and the processor loads the MSP with the value
from address 0x0000.0000. The MSP can only be accessed in privileged mode; the PSP can be
accessed in either privileged or unprivileged mode.
Stack Pointer (SP)
Type R/W, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
SP
Type
Reset
SP
Type
Reset
Bit/Field
Name
Type
Reset
31:0
SP
R/W
-
Description
This field is the address of the stack pointer.
56
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 15: Link Register (LR)
The Link Register (LR) is register R14, and it stores the return information for subroutines, function
calls, and exceptions. LR can be accessed from either privileged or unprivileged mode.
EXC_RETURN is loaded into LR on exception entry. See Table 2-10 on page 83 for the values and
description.
Link Register (LR)
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
LINK
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
LINK
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
31:0
LINK
R/W
R/W
1
Reset
R/W
1
Description
0xFFFF.FFFF This field is the return address.
July 25, 2011
57
Texas Instruments-Production Data
The Cortex-M3 Processor
Register 16: Program Counter (PC)
The Program Counter (PC) is register R15, and it contains the current program address. On reset,
the processor loads the PC with the value of the reset vector, which is at address 0x0000.0004. Bit
0 of the reset vector is loaded into the THUMB bit of the EPSR at reset and must be 1. The PC register
can be accessed in either privileged or unprivileged mode.
Program Counter (PC)
Type R/W, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
PC
Type
Reset
PC
Type
Reset
Bit/Field
Name
Type
Reset
31:0
PC
R/W
-
Description
This field is the current program address.
58
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 17: Program Status Register (PSR)
Note:
This register is also referred to as xPSR.
The Program Status Register (PSR) has three functions, and the register bits are assigned to the
different functions:
■ Application Program Status Register (APSR), bits 31:27,
■ Execution Program Status Register (EPSR), bits 26:24, 15:10
■ Interrupt Program Status Register (IPSR), bits 6:0
The PSR, IPSR, and EPSR registers can only be accessed in privileged mode; the APSR register
can be accessed in either privileged or unprivileged mode.
APSR contains the current state of the condition flags from previous instruction executions.
EPSR contains the Thumb state bit and the execution state bits for the If-Then (IT) instruction or
the Interruptible-Continuable Instruction (ICI) field for an interrupted load multiple or store multiple
instruction. Attempts to read the EPSR directly through application software using the MSR instruction
always return zero. Attempts to write the EPSR using the MSR instruction in application software
are always ignored. Fault handlers can examine the EPSR value in the stacked PSR to determine
the operation that faulted (see “Exception Entry and Return” on page 81).
IPSR contains the exception type number of the current Interrupt Service Routine (ISR).
These registers can be accessed individually or as a combination of any two or all three registers,
using the register name as an argument to the MSR or MRS instructions. For example, all of the
registers can be read using PSR with the MRS instruction, or APSR only can be written to using
APSR with the MSR instruction. page 59 shows the possible register combinations for the PSR. See
the MRS and MSR instruction descriptions in the Cortex™-M3 Instruction Set Technical User's Manual
for more information about how to access the program status registers.
Table 2-3. PSR Register Combinations
Register
Type
PSR
R/W
Combination
APSR, EPSR, and IPSR
IEPSR
RO
EPSR and IPSR
a, b
a
APSR and IPSR
b
APSR and EPSR
IAPSR
R/W
EAPSR
R/W
a. The processor ignores writes to the IPSR bits.
b. Reads of the EPSR bits return zero, and the processor ignores writes to these bits.
Program Status Register (PSR)
Type R/W, reset 0x0100.0000
Type
Reset
31
30
29
28
27
N
Z
C
V
Q
26
25
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
RO
0
RO
0
15
14
13
12
11
10
9
ICI / IT
ICI / IT
Type
Reset
RO
0
RO
0
RO
0
24
23
22
21
20
THUMB
RO
1
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
RO
0
RO
0
RO
0
reserved
ISRNUM
RO
0
RO
0
July 25, 2011
RO
0
RO
0
RO
0
59
Texas Instruments-Production Data
The Cortex-M3 Processor
Bit/Field
Name
Type
Reset
31
N
R/W
0
Description
APSR Negative or Less Flag
Value Description
1
The previous operation result was negative or less than.
0
The previous operation result was positive, zero, greater than,
or equal.
The value of this bit is only meaningful when accessing PSR or APSR.
30
Z
R/W
0
APSR Zero Flag
Value Description
1
The previous operation result was zero.
0
The previous operation result was non-zero.
The value of this bit is only meaningful when accessing PSR or APSR.
29
C
R/W
0
APSR Carry or Borrow Flag
Value Description
1
The previous add operation resulted in a carry bit or the previous
subtract operation did not result in a borrow bit.
0
The previous add operation did not result in a carry bit or the
previous subtract operation resulted in a borrow bit.
The value of this bit is only meaningful when accessing PSR or APSR.
28
V
R/W
0
APSR Overflow Flag
Value Description
1
The previous operation resulted in an overflow.
0
The previous operation did not result in an overflow.
The value of this bit is only meaningful when accessing PSR or APSR.
27
Q
R/W
0
APSR DSP Overflow and Saturation Flag
Value Description
1
DSP Overflow or saturation has occurred.
0
DSP overflow or saturation has not occurred since reset or since
the bit was last cleared.
The value of this bit is only meaningful when accessing PSR or APSR.
This bit is cleared by software using an MRS instruction.
60
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
26:25
ICI / IT
RO
0x0
Description
EPSR ICI / IT status
These bits, along with bits 15:10, contain the Interruptible-Continuable
Instruction (ICI) field for an interrupted load multiple or store multiple
instruction or the execution state bits of the IT instruction.
When EPSR holds the ICI execution state, bits 26:25 are zero.
The If-Then block contains up to four instructions following a 16-bit IT
instruction. Each instruction in the block is conditional. The conditions
for the instructions are either all the same, or some can be the inverse
of others. See the Cortex™-M3 Instruction Set Technical User's Manual
for more information.
The value of this field is only meaningful when accessing PSR or EPSR.
24
THUMB
RO
1
EPSR Thumb State
This bit indicates the Thumb state and should always be set.
The following can clear the THUMB bit:
■
The BLX, BX and POP{PC} instructions
■
Restoration from the stacked xPSR value on an exception return
■
Bit 0 of the vector value on an exception entry
Attempting to execute instructions when this bit is clear results in a fault
or lockup. See “Lockup” on page 85 for more information.
The value of this bit is only meaningful when accessing PSR or EPSR.
23:16
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15:10
ICI / IT
RO
0x0
EPSR ICI / IT status
These bits, along with bits 26:25, contain the Interruptible-Continuable
Instruction (ICI) field for an interrupted load multiple or store multiple
instruction or the execution state bits of the IT instruction.
When an interrupt occurs during the execution of an LDM, STM, PUSH
or POP instruction, the processor stops the load multiple or store multiple
instruction operation temporarily and stores the next register operand
in the multiple operation to bits 15:12. After servicing the interrupt, the
processor returns to the register pointed to by bits 15:12 and resumes
execution of the multiple load or store instruction. When EPSR holds
the ICI execution state, bits 11:10 are zero.
The If-Then block contains up to four instructions following a 16-bit IT
instruction. Each instruction in the block is conditional. The conditions
for the instructions are either all the same, or some can be the inverse
of others. See the Cortex™-M3 Instruction Set Technical User's Manual
for more information.
The value of this field is only meaningful when accessing PSR or EPSR.
9:7
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
61
Texas Instruments-Production Data
The Cortex-M3 Processor
Bit/Field
Name
Type
Reset
Description
6:0
ISRNUM
RO
0x00
IPSR ISR Number
This field contains the exception type number of the current Interrupt
Service Routine (ISR).
Value
Description
0x00
Thread mode
0x01
Reserved
0x02
NMI
0x03
Hard fault
0x04
Memory management fault
0x05
Bus fault
0x06
Usage fault
0x07-0x0A Reserved
0x0B
SVCall
0x0C
Reserved for Debug
0x0D
Reserved
0x0E
PendSV
0x0F
SysTick
0x10
Interrupt Vector 0
0x11
Interrupt Vector 1
...
...
0x46
Interrupt Vector 54
0x47-0x7F Reserved
See “Exception Types” on page 76 for more information.
The value of this field is only meaningful when accessing PSR or IPSR.
62
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 18: Priority Mask Register (PRIMASK)
The PRIMASK register prevents activation of all exceptions with programmable priority. Reset,
non-maskable interrupt (NMI), and hard fault are the only exceptions with fixed priority. Exceptions
should be disabled when they might impact the timing of critical tasks. This register is only accessible
in privileged mode. The MSR and MRS instructions are used to access the PRIMASK register, and
the CPS instruction may be used to change the value of the PRIMASK register. See the Cortex™-M3
Instruction Set Technical User's Manual for more information on these instructions. For more
information on exception priority levels, see “Exception Types” on page 76.
Priority Mask Register (PRIMASK)
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:1
reserved
RO
0x0000.000
0
PRIMASK
R/W
0
RO
0
PRIMASK
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Priority Mask
Value Description
1
Prevents the activation of all exceptions with configurable
priority.
0
No effect.
July 25, 2011
63
Texas Instruments-Production Data
The Cortex-M3 Processor
Register 19: Fault Mask Register (FAULTMASK)
The FAULTMASK register prevents activation of all exceptions except for the Non-Maskable Interrupt
(NMI). Exceptions should be disabled when they might impact the timing of critical tasks. This register
is only accessible in privileged mode. The MSR and MRS instructions are used to access the
FAULTMASK register, and the CPS instruction may be used to change the value of the FAULTMASK
register. See the Cortex™-M3 Instruction Set Technical User's Manual for more information on
these instructions. For more information on exception priority levels, see “Exception
Types” on page 76.
Fault Mask Register (FAULTMASK)
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:1
reserved
RO
0x0000.000
0
FAULTMASK
R/W
0
RO
0
FAULTMASK
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Fault Mask
Value Description
1
Prevents the activation of all exceptions except for NMI.
0
No effect.
The processor clears the FAULTMASK bit on exit from any exception
handler except the NMI handler.
64
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 20: Base Priority Mask Register (BASEPRI)
The BASEPRI register defines the minimum priority for exception processing. When BASEPRI is
set to a nonzero value, it prevents the activation of all exceptions with the same or lower priority
level as the BASEPRI value. Exceptions should be disabled when they might impact the timing of
critical tasks. This register is only accessible in privileged mode. For more information on exception
priority levels, see “Exception Types” on page 76.
Base Priority Mask Register (BASEPRI)
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
BASEPRI
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:5
BASEPRI
R/W
0x0
R/W
0
reserved
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Base Priority
Any exception that has a programmable priority level with the same or
lower priority as the value of this field is masked. The PRIMASK register
can be used to mask all exceptions with programmable priority levels.
Higher priority exceptions have lower priority levels.
Value Description
4:0
reserved
RO
0x0
0x0
All exceptions are unmasked.
0x1
All exceptions with priority level 1-7 are masked.
0x2
All exceptions with priority level 2-7 are masked.
0x3
All exceptions with priority level 3-7 are masked.
0x4
All exceptions with priority level 4-7 are masked.
0x5
All exceptions with priority level 5-7 are masked.
0x6
All exceptions with priority level 6-7 are masked.
0x7
All exceptions with priority level 7 are masked.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
65
Texas Instruments-Production Data
The Cortex-M3 Processor
Register 21: Control Register (CONTROL)
The CONTROL register controls the stack used and the privilege level for software execution when
the processor is in Thread mode. This register is only accessible in privileged mode.
Handler mode always uses MSP, so the processor ignores explicit writes to the ASP bit of the
CONTROL register when in Handler mode. The exception entry and return mechanisms automatically
update the CONTROL register based on the EXC_RETURN value (see Table 2-10 on page 83).
In an OS environment, threads running in Thread mode should use the process stack and the kernel
and exception handlers should use the main stack. By default, Thread mode uses MSP. To switch
the stack pointer used in Thread mode to PSP, either use the MSR instruction to set the ASP bit, as
detailed in the Cortex™-M3 Instruction Set Technical User's Manual, or perform an exception return
to Thread mode with the appropriate EXC_RETURN value, as shown in Table 2-10 on page 83.
Note:
When changing the stack pointer, software must use an ISB instruction immediately after
the MSR instruction, ensuring that instructions after the ISB execute use the new stack
pointer. See the Cortex™-M3 Instruction Set Technical User's Manual.
Control Register (CONTROL)
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
ASP
TMPL
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:2
reserved
RO
0x0000.000
1
ASP
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Active Stack Pointer
Value Description
1
PSP is the current stack pointer.
0
MSP is the current stack pointer
In Handler mode, this bit reads as zero and ignores writes. The
Cortex-M3 updates this bit automatically on exception return.
0
TMPL
R/W
0
Thread Mode Privilege Level
Value Description
1
Unprivileged software can be executed in Thread mode.
0
Only privileged software can be executed in Thread mode.
66
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
2.3.5
Exceptions and Interrupts
The Cortex-M3 processor supports interrupts and system exceptions. The processor and the Nested
Vectored Interrupt Controller (NVIC) prioritize and handle all exceptions. An exception changes the
normal flow of software control. The processor uses Handler mode to handle all exceptions except
for reset. See “Exception Entry and Return” on page 81 for more information.
The NVIC registers control interrupt handling. See “Nested Vectored Interrupt Controller
(NVIC)” on page 91 for more information.
2.3.6
Data Types
The Cortex-M3 supports 32-bit words, 16-bit halfwords, and 8-bit bytes. The processor also supports
64-bit data transfer instructions. All instruction and data memory accesses are little endian. See
“Memory Regions, Types and Attributes” on page 69 for more information.
2.4
Memory Model
This section describes the processor memory map, the behavior of memory accesses, and the
bit-banding features. The processor has a fixed memory map that provides up to 4 GB of addressable
memory.
The memory map for the LM3S1G58 controller is provided in Table 2-4 on page 67. In this manual,
register addresses are given as a hexadecimal increment, relative to the module’s base address
as shown in the memory map.
The regions for SRAM and peripherals include bit-band regions. Bit-banding provides atomic
operations to bit data (see “Bit-Banding” on page 71).
The processor reserves regions of the Private peripheral bus (PPB) address range for core peripheral
registers (see “Cortex-M3 Peripherals” on page 90).
Note:
Within the memory map, all reserved space returns a bus fault when read or written.
Table 2-4. Memory Map
Start
End
Description
For details,
see page ...
0x0000.0000
0x0005.FFFF
On-chip Flash
293
0x0006.0000
0x00FF.FFFF
Reserved
-
0x0100.0000
0x1FFF.FFFF
Reserved for ROM
291
0x2000.0000
0x2000.FFFF
Bit-banded on-chip SRAM
291
0x2001.0000
0x21FF.FFFF
Reserved
-
0x2200.0000
0x221F.FFFF
Bit-band alias of bit-banded on-chip SRAM starting at
0x2000.0000
291
0x2220.0000
0x3FFF.FFFF
Reserved
-
0x4000.0000
0x4000.0FFF
Watchdog timer 0
498
0x4000.1000
0x4000.1FFF
Watchdog timer 1
498
0x4000.2000
0x4000.3FFF
Reserved
-
0x4000.4000
0x4000.4FFF
GPIO Port A
407
0x4000.5000
0x4000.5FFF
GPIO Port B
407
0x4000.6000
0x4000.6FFF
GPIO Port C
407
Memory
FiRM Peripherals
July 25, 2011
67
Texas Instruments-Production Data
The Cortex-M3 Processor
Table 2-4. Memory Map (continued)
Start
End
Description
For details,
see page ...
0x4000.7000
0x4000.7FFF
GPIO Port D
407
0x4000.8000
0x4000.8FFF
SSI0
673
0x4000.9000
0x4000.9FFF
SSI1
673
0x4000.A000
0x4000.BFFF
Reserved
-
0x4000.C000
0x4000.CFFF
UART0
611
0x4000.D000
0x4000.DFFF
UART1
611
0x4000.E000
0x4000.EFFF
UART2
611
0x4000.F000
0x4001.FFFF
Reserved
-
0x4002.0FFF
I2C 0
717
0x4002.1000
0x4002.1FFF
I2C
717
0x4002.2000
0x4002.3FFF
Reserved
-
0x4002.4000
0x4002.4FFF
GPIO Port E
407
0x4002.5000
0x4002.5FFF
GPIO Port F
407
0x4002.6000
0x4002.6FFF
GPIO Port G
407
0x4002.7000
0x4002.7FFF
GPIO Port H
407
0x4002.8000
0x4002.FFFF
Reserved
-
0x4003.0000
0x4003.0FFF
Timer 0
464
0x4003.1000
0x4003.1FFF
Timer 1
464
0x4003.2000
0x4003.2FFF
Timer 2
464
0x4003.3000
0x4003.3FFF
Timer 3
464
0x4003.4000
0x4003.7FFF
Reserved
-
0x4003.8000
0x4003.8FFF
ADC0
541
0x4003.9000
0x4003.9FFF
ADC1
541
0x4003.A000
0x4005.7FFF
Reserved
-
0x4005.8000
0x4005.8FFF
GPIO Port A (AHB aperture)
407
0x4005.9000
0x4005.9FFF
GPIO Port B (AHB aperture)
407
0x4005.A000
0x4005.AFFF
GPIO Port C (AHB aperture)
407
0x4005.B000
0x4005.BFFF
GPIO Port D (AHB aperture)
407
0x4005.C000
0x4005.CFFF
GPIO Port E (AHB aperture)
407
0x4005.D000
0x4005.DFFF
GPIO Port F (AHB aperture)
407
0x4005.E000
0x4005.EFFF
GPIO Port G (AHB aperture)
407
0x4005.F000
0x4005.FFFF
GPIO Port H (AHB aperture)
407
0x4006.0000
0x400F.BFFF
Reserved
-
0x400F.C000
0x400F.CFFF
Hibernation Module
273
0x400F.D000
0x400F.DFFF
Flash memory control
299
0x400F.E000
0x400F.EFFF
System control
186
0x400F.F000
0x400F.FFFF
µDMA
356
0x4010.0000
0x41FF.FFFF
Reserved
-
0x4200.0000
0x43FF.FFFF
Bit-banded alias of 0x4000.0000 through 0x400F.FFFF
-
0x4400.0000
0xDFFF.FFFF
Reserved
-
Peripherals
0x4002.0000
1
68
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 2-4. Memory Map (continued)
Start
End
Description
For details,
see page ...
0xE000.0000
0xE000.0FFF
Instrumentation Trace Macrocell (ITM)
50
0xE000.1000
0xE000.1FFF
Data Watchpoint and Trace (DWT)
50
0xE000.2000
0xE000.2FFF
Flash Patch and Breakpoint (FPB)
50
0xE000.3000
0xE000.DFFF
Reserved
-
0xE000.E000
0xE000.EFFF
Cortex-M3 Peripherals (SysTick, NVIC, SCB, and MPU)
75
0xE000.F000
0xE003.FFFF
Reserved
-
0xE004.0000
0xE004.0FFF
Trace Port Interface Unit (TPIU)
51
0xE004.1000
0xFFFF.FFFF
Reserved
-
Private Peripheral Bus
2.4.1
Memory Regions, Types and Attributes
The memory map and the programming of the MPU split the memory map into regions. Each region
has a defined memory type, and some regions have additional memory attributes. The memory
type and attributes determine the behavior of accesses to the region.
The memory types are:
■ Normal: The processor can re-order transactions for efficiency and perform speculative reads.
■ Device: The processor preserves transaction order relative to other transactions to Device or
Strongly Ordered memory.
■ Strongly Ordered: The processor preserves transaction order relative to all other transactions.
The different ordering requirements for Device and Strongly Ordered memory mean that the memory
system can buffer a write to Device memory but must not buffer a write to Strongly Ordered memory.
An additional memory attribute is Execute Never (XN), which means the processor prevents
instruction accesses. A fault exception is generated only on execution of an instruction executed
from an XN region.
2.4.2
Memory System Ordering of Memory Accesses
For most memory accesses caused by explicit memory access instructions, the memory system
does not guarantee that the order in which the accesses complete matches the program order of
the instructions, providing the order does not affect the behavior of the instruction sequence. Normally,
if correct program execution depends on two memory accesses completing in program order,
software must insert a memory barrier instruction between the memory access instructions (see
“Software Ordering of Memory Accesses” on page 70).
However, the memory system does guarantee ordering of accesses to Device and Strongly Ordered
memory. For two memory access instructions A1 and A2, if both A1 and A2 are accesses to either
Device or Strongly Ordered memory, and if A1 occurs before A2 in program order, A1 is always
observed before A2.
2.4.3
Behavior of Memory Accesses
Table 2-5 on page 70 shows the behavior of accesses to each region in the memory map. See
“Memory Regions, Types and Attributes” on page 69 for more information on memory types and
July 25, 2011
69
Texas Instruments-Production Data
The Cortex-M3 Processor
the XN attribute. Stellaris devices may have reserved memory areas within the address ranges
shown below (refer to Table 2-4 on page 67 for more information).
Table 2-5. Memory Access Behavior
Address Range
Memory Region
Memory Type
Execute
Never
(XN)
Description
0x0000.0000 - 0x1FFF.FFFF Code
Normal
-
This executable region is for program code.
Data can also be stored here.
0x2000.0000 - 0x3FFF.FFFF SRAM
Normal
-
This executable region is for data. Code
can also be stored here. This region
includes bit band and bit band alias areas
(see Table 2-6 on page 72).
0x4000.0000 - 0x5FFF.FFFF Peripheral
Device
XN
This region includes bit band and bit band
alias areas (see Table 2-7 on page 72).
0x6000.0000 - 0x9FFF.FFFF External RAM
Normal
-
This executable region is for data.
0xA000.0000 - 0xDFFF.FFFF External device
Device
XN
This region is for external device memory.
0xE000.0000- 0xE00F.FFFF Private peripheral
bus
Strongly
Ordered
XN
This region includes the NVIC, system
timer, and system control block.
0xE010.0000- 0xFFFF.FFFF Reserved
-
-
-
The Code, SRAM, and external RAM regions can hold programs. However, it is recommended that
programs always use the Code region because the Cortex-M3 has separate buses that can perform
instruction fetches and data accesses simultaneously.
The MPU can override the default memory access behavior described in this section. For more
information, see “Memory Protection Unit (MPU)” on page 93.
The Cortex-M3 prefetches instructions ahead of execution and speculatively prefetches from branch
target addresses.
2.4.4
Software Ordering of Memory Accesses
The order of instructions in the program flow does not always guarantee the order of the
corresponding memory transactions for the following reasons:
■ The processor can reorder some memory accesses to improve efficiency, providing this does
not affect the behavior of the instruction sequence.
■ The processor has multiple bus interfaces.
■ Memory or devices in the memory map have different wait states.
■ Some memory accesses are buffered or speculative.
“Memory System Ordering of Memory Accesses” on page 69 describes the cases where the memory
system guarantees the order of memory accesses. Otherwise, if the order of memory accesses is
critical, software must include memory barrier instructions to force that ordering. The Cortex-M3
has the following memory barrier instructions:
■ The Data Memory Barrier (DMB) instruction ensures that outstanding memory transactions
complete before subsequent memory transactions.
70
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ The Data Synchronization Barrier (DSB) instruction ensures that outstanding memory transactions
complete before subsequent instructions execute.
■ The Instruction Synchronization Barrier (ISB) instruction ensures that the effect of all completed
memory transactions is recognizable by subsequent instructions.
Memory barrier instructions can be used in the following situations:
■ MPU programming
– If the MPU settings are changed and the change must be effective on the very next instruction,
use a DSB instruction to ensure the effect of the MPU takes place immediately at the end of
context switching.
– Use an ISB instruction to ensure the new MPU setting takes effect immediately after
programming the MPU region or regions, if the MPU configuration code was accessed using
a branch or call. If the MPU configuration code is entered using exception mechanisms, then
an ISB instruction is not required.
■ Vector table
If the program changes an entry in the vector table and then enables the corresponding exception,
use a DMB instruction between the operations. The DMB instruction ensures that if the exception
is taken immediately after being enabled, the processor uses the new exception vector.
■ Self-modifying code
If a program contains self-modifying code, use an ISB instruction immediately after the code
modification in the program. The ISB instruction ensures subsequent instruction execution uses
the updated program.
■ Memory map switching
If the system contains a memory map switching mechanism, use a DSB instruction after switching
the memory map in the program. The DSB instruction ensures subsequent instruction execution
uses the updated memory map.
■ Dynamic exception priority change
When an exception priority has to change when the exception is pending or active, use DSB
instructions after the change. The change then takes effect on completion of the DSB instruction.
Memory accesses to Strongly Ordered memory, such as the System Control Block, do not require
the use of DMB instructions.
For more information on the memory barrier instructions, see the Cortex™-M3 Instruction Set
Technical User's Manual.
2.4.5
Bit-Banding
A bit-band region maps each word in a bit-band alias region to a single bit in the bit-band region.
The bit-band regions occupy the lowest 1 MB of the SRAM and peripheral memory regions. Accesses
to the 32-MB SRAM alias region map to the 1-MB SRAM bit-band region, as shown in Table
2-6 on page 72. Accesses to the 32-MB peripheral alias region map to the 1-MB peripheral bit-band
region, as shown in Table 2-7 on page 72. For the specific address range of the bit-band regions,
see Table 2-4 on page 67.
July 25, 2011
71
Texas Instruments-Production Data
The Cortex-M3 Processor
Note:
A word access to the SRAM or the peripheral bit-band alias region maps to a single bit in
the SRAM or peripheral bit-band region.
A word access to a bit band address results in a word access to the underlying memory,
and similarly for halfword and byte accesses. This allows bit band accesses to match the
access requirements of the underlying peripheral.
Table 2-6. SRAM Memory Bit-Banding Regions
Address Range
Memory Region
Instruction and Data Accesses
0x2000.0000 - 0x200F.FFFF SRAM bit-band region
Direct accesses to this memory range behave as SRAM memory
accesses, but this region is also bit addressable through bit-band
alias.
0x2200.0000 - 0x23FF.FFFF SRAM bit-band alias
Data accesses to this region are remapped to bit band region.
A write operation is performed as read-modify-write. Instruction
accesses are not remapped.
Table 2-7. Peripheral Memory Bit-Banding Regions
Address Range
Memory Region
Instruction and Data Accesses
0x4000.0000 - 0x400F.FFFF Peripheral bit-band region
Direct accesses to this memory range behave as peripheral
memory accesses, but this region is also bit addressable through
bit-band alias.
0x4200.0000 - 0x43FF.FFFF Peripheral bit-band alias
Data accesses to this region are remapped to bit band region.
A write operation is performed as read-modify-write. Instruction
accesses are not permitted.
The following formula shows how the alias region maps onto the bit-band region:
bit_word_offset = (byte_offset x 32) + (bit_number x 4)
bit_word_addr = bit_band_base + bit_word_offset
where:
bit_word_offset
The position of the target bit in the bit-band memory region.
bit_word_addr
The address of the word in the alias memory region that maps to the targeted bit.
bit_band_base
The starting address of the alias region.
byte_offset
The number of the byte in the bit-band region that contains the targeted bit.
bit_number
The bit position, 0-7, of the targeted bit.
Figure 2-4 on page 73 shows examples of bit-band mapping between the SRAM bit-band alias
region and the SRAM bit-band region:
■ The alias word at 0x23FF.FFE0 maps to bit 0 of the bit-band byte at 0x200F.FFFF:
0x23FF.FFE0 = 0x2200.0000 + (0x000F.FFFF*32) + (0*4)
72
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ The alias word at 0x23FF.FFFC maps to bit 7 of the bit-band byte at 0x200F.FFFF:
0x23FF.FFFC = 0x2200.0000 + (0x000F.FFFF*32) + (7*4)
■ The alias word at 0x2200.0000 maps to bit 0 of the bit-band byte at 0x2000.0000:
0x2200.0000 = 0x2200.0000 + (0*32) + (0*4)
■ The alias word at 0x2200.001C maps to bit 7 of the bit-band byte at 0x2000.0000:
0x2200.001C = 0x2200.0000+ (0*32) + (7*4)
Figure 2-4. Bit-Band Mapping
32-MB Alias Region
0x23FF.FFFC
0x23FF.FFF8
0x23FF.FFF4
0x23FF.FFF0
0x23FF.FFEC
0x23FF.FFE8
0x23FF.FFE4
0x23FF.FFE0
0x2200.001C
0x2200.0018
0x2200.0014
0x2200.0010
0x2200.000C
0x2200.0008
0x2200.0004
0x2200.0000
7
3
1-MB SRAM Bit-Band Region
7
6
5
4
3
2
1
0
7
6
0x200F.FFFF
7
6
5
4
3
2
0x2000.0003
2.4.5.1
5
4
3
2
1
0
7
6
0x200F.FFFE
1
0
7
6
5
4
3
2
5
4
3
2
1
0
6
0x200F.FFFD
1
0
0x2000.0002
7
6
5
4
3
2
0x2000.0001
5
4
2
1
0
1
0
0x200F.FFFC
1
0
7
6
5
4
3
2
0x2000.0000
Directly Accessing an Alias Region
Writing to a word in the alias region updates a single bit in the bit-band region.
Bit 0 of the value written to a word in the alias region determines the value written to the targeted
bit in the bit-band region. Writing a value with bit 0 set writes a 1 to the bit-band bit, and writing a
value with bit 0 clear writes a 0 to the bit-band bit.
Bits 31:1 of the alias word have no effect on the bit-band bit. Writing 0x01 has the same effect as
writing 0xFF. Writing 0x00 has the same effect as writing 0x0E.
When reading a word in the alias region, 0x0000.0000 indicates that the targeted bit in the bit-band
region is clear and 0x0000.0001 indicates that the targeted bit in the bit-band region is set.
2.4.5.2
Directly Accessing a Bit-Band Region
“Behavior of Memory Accesses” on page 69 describes the behavior of direct byte, halfword, or word
accesses to the bit-band regions.
July 25, 2011
73
Texas Instruments-Production Data
The Cortex-M3 Processor
2.4.6
Data Storage
The processor views memory as a linear collection of bytes numbered in ascending order from zero.
For example, bytes 0-3 hold the first stored word, and bytes 4-7 hold the second stored word. Data
is stored in little-endian format, with the least-significant byte (lsbyte) of a word stored at the
lowest-numbered byte, and the most-significant byte (msbyte) stored at the highest-numbered byte.
Figure 2-5 on page 74 illustrates how data is stored.
Figure 2-5. Data Storage
Memory
7
Register
0
31
2.4.7
Address A
B0
A+1
B1
A+2
B2
A+3
B3
lsbyte
24 23
B3
16 15
B2
8 7
B1
0
B0
msbyte
Synchronization Primitives
The Cortex-M3 instruction set includes pairs of synchronization primitives which provide a
non-blocking mechanism that a thread or process can use to obtain exclusive access to a memory
location. Software can use these primitives to perform a guaranteed read-modify-write memory
update sequence or for a semaphore mechanism.
A pair of synchronization primitives consists of:
■ A Load-Exclusive instruction, which is used to read the value of a memory location and requests
exclusive access to that location.
■ A Store-Exclusive instruction, which is used to attempt to write to the same memory location and
returns a status bit to a register. If this status bit is clear, it indicates that the thread or process
gained exclusive access to the memory and the write succeeds; if this status bit is set, it indicates
that the thread or process did not gain exclusive access to the memory and no write is performed.
The pairs of Load-Exclusive and Store-Exclusive instructions are:
■ The word instructions LDREX and STREX
■ The halfword instructions LDREXH and STREXH
■ The byte instructions LDREXB and STREXB
Software must use a Load-Exclusive instruction with the corresponding Store-Exclusive instruction.
To perform a guaranteed read-modify-write of a memory location, software must:
1. Use a Load-Exclusive instruction to read the value of the location.
2. Update the value, as required.
74
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
3. Use a Store-Exclusive instruction to attempt to write the new value back to the memory location,
and test the returned status bit. If the status bit is clear, the read-modify-write completed
successfully; if the status bit is set, no write was performed, which indicates that the value
returned at step 1 might be out of date. The software must retry the read-modify-write sequence.
Software can use the synchronization primitives to implement a semaphore as follows:
1. Use a Load-Exclusive instruction to read from the semaphore address to check whether the
semaphore is free.
2. If the semaphore is free, use a Store-Exclusive to write the claim value to the semaphore
address.
3. If the returned status bit from step 2 indicates that the Store-Exclusive succeeded, then the
software has claimed the semaphore. However, if the Store-Exclusive failed, another process
might have claimed the semaphore after the software performed step 1.
The Cortex-M3 includes an exclusive access monitor that tags the fact that the processor has
executed a Load-Exclusive instruction. The processor removes its exclusive access tag if:
■ It executes a CLREX instruction.
■ It executes a Store-Exclusive instruction, regardless of whether the write succeeds.
■ An exception occurs, which means the processor can resolve semaphore conflicts between
different threads.
For more information about the synchronization primitive instructions, see the Cortex™-M3 Instruction
Set Technical User's Manual.
2.5
Exception Model
The ARM Cortex-M3 processor and the Nested Vectored Interrupt Controller (NVIC) prioritize and
handle all exceptions in Handler Mode. The processor state is automatically stored to the stack on
an exception and automatically restored from the stack at the end of the Interrupt Service Routine
(ISR). The vector is fetched in parallel to the state saving, enabling efficient interrupt entry. The
processor supports tail-chaining, which enables back-to-back interrupts to be performed without the
overhead of state saving and restoration.
Table 2-8 on page 77 lists all exception types. Software can set eight priority levels on seven of
these exceptions (system handlers) as well as on 37 interrupts (listed in Table 2-9 on page 78).
Priorities on the system handlers are set with the NVIC System Handler Priority n (SYSPRIn)
registers. Interrupts are enabled through the NVIC Interrupt Set Enable n (ENn) register and
prioritized with the NVIC Interrupt Priority n (PRIn) registers. Priorities can be grouped by splitting
priority levels into preemption priorities and subpriorities. All the interrupt registers are described in
“Nested Vectored Interrupt Controller (NVIC)” on page 91.
Internally, the highest user-programmable priority (0) is treated as fourth priority, after a Reset,
Non-Maskable Interrupt (NMI), and a Hard Fault, in that order. Note that 0 is the default priority for
all the programmable priorities.
Important: After a write to clear an interrupt source, it may take several processor cycles for the
NVIC to see the interrupt source de-assert. Thus if the interrupt clear is done as the
last action in an interrupt handler, it is possible for the interrupt handler to complete
July 25, 2011
75
Texas Instruments-Production Data
The Cortex-M3 Processor
while the NVIC sees the interrupt as still asserted, causing the interrupt handler to be
re-entered errantly. This situation can be avoided by either clearing the interrupt source
at the beginning of the interrupt handler or by performing a read or write after the write
to clear the interrupt source (and flush the write buffer).
See “Nested Vectored Interrupt Controller (NVIC)” on page 91 for more information on exceptions
and interrupts.
2.5.1
Exception States
Each exception is in one of the following states:
■ Inactive. The exception is not active and not pending.
■ Pending. The exception is waiting to be serviced by the processor. An interrupt request from a
peripheral or from software can change the state of the corresponding interrupt to pending.
■ Active. An exception that is being serviced by the processor but has not completed.
Note:
An exception handler can interrupt the execution of another exception handler. In this
case, both exceptions are in the active state.
■ Active and Pending. The exception is being serviced by the processor, and there is a pending
exception from the same source.
2.5.2
Exception Types
The exception types are:
■ Reset. Reset is invoked on power up or a warm reset. The exception model treats reset as a
special form of exception. When reset is asserted, the operation of the processor stops, potentially
at any point in an instruction. When reset is deasserted, execution restarts from the address
provided by the reset entry in the vector table. Execution restarts as privileged execution in
Thread mode.
■ NMI. A non-maskable Interrupt (NMI) can be signaled using the NMI signal or triggered by
software using the Interrupt Control and State (INTCTRL) register. This exception has the
highest priority other than reset. NMI is permanently enabled and has a fixed priority of -2. NMIs
cannot be masked or prevented from activation by any other exception or preempted by any
exception other than reset.
■ Hard Fault. A hard fault is an exception that occurs because of an error during exception
processing, or because an exception cannot be managed by any other exception mechanism.
Hard faults have a fixed priority of -1, meaning they have higher priority than any exception with
configurable priority.
■ Memory Management Fault. A memory management fault is an exception that occurs because
of a memory protection related fault, including access violation and no match. The MPU or the
fixed memory protection constraints determine this fault, for both instruction and data memory
transactions. This fault is used to abort instruction accesses to Execute Never (XN) memory
regions, even if the MPU is disabled.
■ Bus Fault. A bus fault is an exception that occurs because of a memory-related fault for an
instruction or data memory transaction such as a prefetch fault or a memory access fault. This
fault can be enabled or disabled.
76
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ Usage Fault. A usage fault is an exception that occurs because of a fault related to instruction
execution, such as:
– An undefined instruction
– An illegal unaligned access
– Invalid state on instruction execution
– An error on exception return
An unaligned address on a word or halfword memory access or division by zero can cause a
usage fault when the core is properly configured.
■ SVCall. A supervisor call (SVC) is an exception that is triggered by the SVC instruction. In an
OS environment, applications can use SVC instructions to access OS kernel functions and device
drivers.
■ Debug Monitor. This exception is caused by the debug monitor (when not halting). This exception
is only active when enabled. This exception does not activate if it is a lower priority than the
current activation.
■ PendSV. PendSV is a pendable, interrupt-driven request for system-level service. In an OS
environment, use PendSV for context switching when no other exception is active. PendSV is
triggered using the Interrupt Control and State (INTCTRL) register.
■ SysTick. A SysTick exception is an exception that the system timer generates when it reaches
zero when it is enabled to generate an interrupt. Software can also generate a SysTick exception
using the Interrupt Control and State (INTCTRL) register. In an OS environment, the processor
can use this exception as system tick.
■ Interrupt (IRQ). An interrupt, or IRQ, is an exception signaled by a peripheral or generated by
a software request and fed through the NVIC (prioritized). All interrupts are asynchronous to
instruction execution. In the system, peripherals use interrupts to communicate with the processor.
Table 2-9 on page 78 lists the interrupts on the LM3S1G58 controller.
For an asynchronous exception, other than reset, the processor can execute another instruction
between when the exception is triggered and when the processor enters the exception handler.
Privileged software can disable the exceptions that Table 2-8 on page 77 shows as having
configurable priority (see the SYSHNDCTRL register on page 134 and the DIS0 register on page 107).
For more information about hard faults, memory management faults, bus faults, and usage faults,
see “Fault Handling” on page 83.
Table 2-8. Exception Types
Exception Type
a
Vector
Number
Priority
Vector Address or
b
Offset
-
0
-
0x0000.0000
Stack top is loaded from the first
entry of the vector table on reset.
Reset
1
-3 (highest)
0x0000.0004
Asynchronous
Non-Maskable Interrupt
(NMI)
2
-2
0x0000.0008
Asynchronous
Hard Fault
3
-1
0x0000.000C
-
0x0000.0010
Synchronous
Memory Management
4
c
programmable
July 25, 2011
Activation
77
Texas Instruments-Production Data
The Cortex-M3 Processor
Table 2-8. Exception Types (continued)
Exception Type
a
Vector
Number
Priority
Bus Fault
5
programmable
Usage Fault
6
7-10
-
Vector Address or
b
Offset
Activation
c
0x0000.0014
Synchronous when precise and
asynchronous when imprecise
programmable
c
0x0000.0018
Synchronous
-
c
c
Reserved
SVCall
11
programmable
0x0000.002C
Synchronous
Debug Monitor
12
programmable
0x0000.0030
Synchronous
-
13
-
0x0000.0038
Asynchronous
c
0x0000.003C
Asynchronous
PendSV
14
programmable
SysTick
15
programmable
Interrupts
16 and above
Reserved
c
d
programmable
0x0000.0040 and above Asynchronous
a. 0 is the default priority for all the programmable priorities.
b. See “Vector Table” on page 79.
c. See SYSPRI1 on page 131.
d. See PRIn registers on page 115.
Table 2-9. Interrupts
Vector Number
Interrupt Number (Bit
in Interrupt Registers)
Vector Address or
Offset
Description
0-15
-
0x0000.0000 0x0000.003C
16
0
0x0000.0040
GPIO Port A
17
1
0x0000.0044
GPIO Port B
18
2
0x0000.0048
GPIO Port C
19
3
0x0000.004C
GPIO Port D
20
4
0x0000.0050
GPIO Port E
21
5
0x0000.0054
UART0
22
6
0x0000.0058
UART1
23
7
0x0000.005C
SSI0
24
8
0x0000.0060
I2C0
25-29
9-13
-
30
14
0x0000.0078
ADC0 Sequence 0
31
15
0x0000.007C
ADC0 Sequence 1
32
16
0x0000.0080
ADC0 Sequence 2
33
17
0x0000.0084
ADC0 Sequence 3
34
18
0x0000.0088
Watchdog Timers 0 and 1
35
19
0x0000.008C
Timer 0A
36
20
0x0000.0090
Timer 0B
37
21
0x0000.0094
Timer 1A
38
22
0x0000.0098
Timer 1B
39
23
0x0000.009C
Timer 2A
40
24
0x0000.00A0
Timer 2B
41-43
25-27
-
Reserved
Processor exceptions
Reserved
78
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 2-9. Interrupts (continued)
2.5.3
Vector Number
Interrupt Number (Bit
in Interrupt Registers)
Vector Address or
Offset
Description
44
28
0x0000.00B0
System Control
45
29
0x0000.00B4
Flash Memory Control
46
30
0x0000.00B8
GPIO Port F
47
31
0x0000.00BC
GPIO Port G
48
32
0x0000.00C0
GPIO Port H
49
33
0x0000.00C4
UART2
50
34
0x0000.00C8
SSI1
51
35
0x0000.00CC
Timer 3A
52
36
0x0000.00D0
Timer 3B
53
37
0x0000.00D4
I2C1
54-58
38-42
-
59
43
0x0000.00EC
60-61
44-45
-
Reserved
Hibernation Module
Reserved
62
46
0x0000.00F8
µDMA Software
63
47
0x0000.00FC
µDMA Error
64
48
0x0000.0100
ADC1 Sequence 0
65
49
0x0000.0104
ADC1 Sequence 1
66
50
0x0000.0108
ADC1 Sequence 2
67
51
0x0000.010C
ADC1 Sequence 3
68-70
52-54
-
Reserved
Exception Handlers
The processor handles exceptions using:
■ Interrupt Service Routines (ISRs). Interrupts (IRQx) are the exceptions handled by ISRs.
■ Fault Handlers. Hard fault, memory management fault, usage fault, and bus fault are fault
exceptions handled by the fault handlers.
■ System Handlers. NMI, PendSV, SVCall, SysTick, and the fault exceptions are all system
exceptions that are handled by system handlers.
2.5.4
Vector Table
The vector table contains the reset value of the stack pointer and the start addresses, also called
exception vectors, for all exception handlers. The vector table is constructed using the vector address
or offset shown in Table 2-8 on page 77. Figure 2-6 on page 80 shows the order of the exception
vectors in the vector table. The least-significant bit of each vector must be 1, indicating that the
exception handler is Thumb code
July 25, 2011
79
Texas Instruments-Production Data
The Cortex-M3 Processor
Figure 2-6. Vector Table
Exception number IRQ number
70
54
.
.
.
18
2
17
1
16
0
15
-1
14
-2
13
Offset
0x0118
.
.
.
0x004C
0x0048
0x0044
0x0040
0x003C
0x0038
12
11
Vector
IRQ54
.
.
.
IRQ2
IRQ1
IRQ0
Systick
PendSV
Reserved
Reserved for Debug
-5
10
0x002C
9
SVCall
Reserved
8
7
6
-10
5
-11
4
-12
3
-13
2
-14
1
0x0018
0x0014
0x0010
0x000C
0x0008
0x0004
0x0000
Usage fault
Bus fault
Memory management fault
Hard fault
NMI
Reset
Initial SP value
On system reset, the vector table is fixed at address 0x0000.0000. Privileged software can write to
the Vector Table Offset (VTABLE) register to relocate the vector table start address to a different
memory location, in the range 0x0000.0200 to 0x3FFF.FE00 (see “Vector Table” on page 79). Note
that when configuring the VTABLE register, the offset must be aligned on a 512-byte boundary.
2.5.5
Exception Priorities
As Table 2-8 on page 77 shows, all exceptions have an associated priority, with a lower priority
value indicating a higher priority and configurable priorities for all exceptions except Reset, Hard
fault, and NMI. If software does not configure any priorities, then all exceptions with a configurable
priority have a priority of 0. For information about configuring exception priorities, see page 131 and
page 115.
Note:
Configurable priority values for the Stellaris implementation are in the range 0-7. This means
that the Reset, Hard fault, and NMI exceptions, with fixed negative priority values, always
have higher priority than any other exception.
For example, assigning a higher priority value to IRQ[0] and a lower priority value to IRQ[1] means
that IRQ[1] has higher priority than IRQ[0]. If both IRQ[1] and IRQ[0] are asserted, IRQ[1] is processed
before IRQ[0].
80
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
If multiple pending exceptions have the same priority, the pending exception with the lowest exception
number takes precedence. For example, if both IRQ[0] and IRQ[1] are pending and have the same
priority, then IRQ[0] is processed before IRQ[1].
When the processor is executing an exception handler, the exception handler is preempted if a
higher priority exception occurs. If an exception occurs with the same priority as the exception being
handled, the handler is not preempted, irrespective of the exception number. However, the status
of the new interrupt changes to pending.
2.5.6
Interrupt Priority Grouping
To increase priority control in systems with interrupts, the NVIC supports priority grouping. This
grouping divides each interrupt priority register entry into two fields:
■ An upper field that defines the group priority
■ A lower field that defines a subpriority within the group
Only the group priority determines preemption of interrupt exceptions. When the processor is
executing an interrupt exception handler, another interrupt with the same group priority as the
interrupt being handled does not preempt the handler.
If multiple pending interrupts have the same group priority, the subpriority field determines the order
in which they are processed. If multiple pending interrupts have the same group priority and
subpriority, the interrupt with the lowest IRQ number is processed first.
For information about splitting the interrupt priority fields into group priority and subpriority, see
page 125.
2.5.7
Exception Entry and Return
Descriptions of exception handling use the following terms:
■ Preemption. When the processor is executing an exception handler, an exception can preempt
the exception handler if its priority is higher than the priority of the exception being handled. See
“Interrupt Priority Grouping” on page 81 for more information about preemption by an interrupt.
When one exception preempts another, the exceptions are called nested exceptions. See
“Exception Entry” on page 82 more information.
■ Return. Return occurs when the exception handler is completed, and there is no pending
exception with sufficient priority to be serviced and the completed exception handler was not
handling a late-arriving exception. The processor pops the stack and restores the processor
state to the state it had before the interrupt occurred. See “Exception Return” on page 82 for
more information.
■ Tail-Chaining. This mechanism speeds up exception servicing. On completion of an exception
handler, if there is a pending exception that meets the requirements for exception entry, the
stack pop is skipped and control transfers to the new exception handler.
■ Late-Arriving. This mechanism speeds up preemption. If a higher priority exception occurs
during state saving for a previous exception, the processor switches to handle the higher priority
exception and initiates the vector fetch for that exception. State saving is not affected by late
arrival because the state saved is the same for both exceptions. Therefore, the state saving
continues uninterrupted. The processor can accept a late arriving exception until the first instruction
of the exception handler of the original exception enters the execute stage of the processor. On
July 25, 2011
81
Texas Instruments-Production Data
The Cortex-M3 Processor
return from the exception handler of the late-arriving exception, the normal tail-chaining rules
apply.
2.5.7.1
Exception Entry
Exception entry occurs when there is a pending exception with sufficient priority and either the
processor is in Thread mode or the new exception is of higher priority than the exception being
handled, in which case the new exception preempts the original exception.
When one exception preempts another, the exceptions are nested.
Sufficient priority means the exception has more priority than any limits set by the mask registers
(see PRIMASK on page 63, FAULTMASK on page 64, and BASEPRI on page 65). An exception
with less priority than this is pending but is not handled by the processor.
When the processor takes an exception, unless the exception is a tail-chained or a late-arriving
exception, the processor pushes information onto the current stack. This operation is referred to as
stacking and the structure of eight data words is referred to as stack frame.
Figure 2-7. Exception Stack Frame
...
{aligner}
xPSR
PC
LR
R12
R3
R2
R1
R0
Pre-IRQ top of stack
IRQ top of stack
Immediately after stacking, the stack pointer indicates the lowest address in the stack frame.
The stack frame includes the return address, which is the address of the next instruction in the
interrupted program. This value is restored to the PC at exception return so that the interrupted
program resumes.
In parallel to the stacking operation, the processor performs a vector fetch that reads the exception
handler start address from the vector table. When stacking is complete, the processor starts executing
the exception handler. At the same time, the processor writes an EXC_RETURN value to the LR,
indicating which stack pointer corresponds to the stack frame and what operation mode the processor
was in before the entry occurred.
If no higher-priority exception occurs during exception entry, the processor starts executing the
exception handler and automatically changes the status of the corresponding pending interrupt to
active.
If another higher-priority exception occurs during exception entry, known as late arrival, the processor
starts executing the exception handler for this exception and does not change the pending status
of the earlier exception.
2.5.7.2
Exception Return
Exception return occurs when the processor is in Handler mode and executes one of the following
instructions to load the EXC_RETURN value into the PC:
■ An LDM or POP instruction that loads the PC
82
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ A BX instruction using any register
■ An LDR instruction with the PC as the destination
EXC_RETURN is the value loaded into the LR on exception entry. The exception mechanism relies
on this value to detect when the processor has completed an exception handler. The lowest four
bits of this value provide information on the return stack and processor mode. Table 2-10 on page 83
shows the EXC_RETURN values with a description of the exception return behavior.
EXC_RETURN bits 31:4 are all set. When this value is loaded into the PC, it indicates to the processor
that the exception is complete, and the processor initiates the appropriate exception return sequence.
Table 2-10. Exception Return Behavior
EXC_RETURN[31:0]
Description
0xFFFF.FFF0
Reserved
0xFFFF.FFF1
Return to Handler mode.
Exception return uses state from MSP.
Execution uses MSP after return.
0xFFFF.FFF2 - 0xFFFF.FFF8
Reserved
0xFFFF.FFF9
Return to Thread mode.
Exception return uses state from MSP.
Execution uses MSP after return.
0xFFFF.FFFA - 0xFFFF.FFFC
Reserved
0xFFFF.FFFD
Return to Thread mode.
Exception return uses state from PSP.
Execution uses PSP after return.
0xFFFF.FFFE - 0xFFFF.FFFF
2.6
Reserved
Fault Handling
Faults are a subset of the exceptions (see “Exception Model” on page 75). The following conditions
generate a fault:
■ A bus error on an instruction fetch or vector table load or a data access.
■ An internally detected error such as an undefined instruction or an attempt to change state with
a BX instruction.
■ Attempting to execute an instruction from a memory region marked as Non-Executable (XN).
■ An MPU fault because of a privilege violation or an attempt to access an unmanaged region.
2.6.1
Fault Types
Table 2-11 on page 83 shows the types of fault, the handler used for the fault, the corresponding
fault status register, and the register bit that indicates the fault has occurred. See page 138 for more
information about the fault status registers.
Table 2-11. Faults
Fault
Handler
Fault Status Register
Bit Name
Bus error on a vector read
Hard fault
Hard Fault Status (HFAULTSTAT)
VECT
July 25, 2011
83
Texas Instruments-Production Data
The Cortex-M3 Processor
Table 2-11. Faults (continued)
Fault
Handler
Fault Status Register
Bit Name
Fault escalated to a hard fault
Hard fault
Hard Fault Status (HFAULTSTAT)
FORCED
MPU or default memory mismatch on Memory management
instruction access
fault
Memory Management Fault Status
(MFAULTSTAT)
IERR
MPU or default memory mismatch on Memory management
data access
fault
Memory Management Fault Status
(MFAULTSTAT)
DERR
MPU or default memory mismatch on Memory management
exception stacking
fault
Memory Management Fault Status
(MFAULTSTAT)
MSTKE
MPU or default memory mismatch on Memory management
exception unstacking
fault
Memory Management Fault Status
(MFAULTSTAT)
MUSTKE
Bus error during exception stacking
a
Bus fault
Bus Fault Status (BFAULTSTAT)
BSTKE
Bus error during exception unstacking Bus fault
Bus Fault Status (BFAULTSTAT)
BUSTKE
Bus error during instruction prefetch
Bus fault
Bus Fault Status (BFAULTSTAT)
IBUS
Precise data bus error
Bus fault
Bus Fault Status (BFAULTSTAT)
PRECISE
Imprecise data bus error
Bus fault
Bus Fault Status (BFAULTSTAT)
IMPRE
Attempt to access a coprocessor
Usage fault
Usage Fault Status (UFAULTSTAT)
NOCP
Undefined instruction
Usage fault
Usage Fault Status (UFAULTSTAT)
UNDEF
Attempt to enter an invalid instruction Usage fault
b
set state
Usage Fault Status (UFAULTSTAT)
INVSTAT
Invalid EXC_RETURN value
Usage fault
Usage Fault Status (UFAULTSTAT)
INVPC
Illegal unaligned load or store
Usage fault
Usage Fault Status (UFAULTSTAT)
UNALIGN
Divide by 0
Usage fault
Usage Fault Status (UFAULTSTAT)
DIV0
a. Occurs on an access to an XN region even if the MPU is disabled.
b. Attempting to use an instruction set other than the Thumb instruction set, or returning to a non load-store-multiple instruction
with ICI continuation.
2.6.2
Fault Escalation and Hard Faults
All fault exceptions except for hard fault have configurable exception priority (see SYSPRI1 on
page 131). Software can disable execution of the handlers for these faults (see SYSHNDCTRL on
page 134).
Usually, the exception priority, together with the values of the exception mask registers, determines
whether the processor enters the fault handler, and whether a fault handler can preempt another
fault handler as described in “Exception Model” on page 75.
In some situations, a fault with configurable priority is treated as a hard fault. This process is called
priority escalation, and the fault is described as escalated to hard fault. Escalation to hard fault
occurs when:
■ A fault handler causes the same kind of fault as the one it is servicing. This escalation to hard
fault occurs because a fault handler cannot preempt itself because it must have the same priority
as the current priority level.
■ A fault handler causes a fault with the same or lower priority as the fault it is servicing. This
situation happens because the handler for the new fault cannot preempt the currently executing
fault handler.
■ An exception handler causes a fault for which the priority is the same as or lower than the currently
executing exception.
84
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ A fault occurs and the handler for that fault is not enabled.
If a bus fault occurs during a stack push when entering a bus fault handler, the bus fault does not
escalate to a hard fault. Thus if a corrupted stack causes a fault, the fault handler executes even
though the stack push for the handler failed. The fault handler operates but the stack contents are
corrupted.
Note:
2.6.3
Only Reset and NMI can preempt the fixed priority hard fault. A hard fault can preempt any
exception other than Reset, NMI, or another hard fault.
Fault Status Registers and Fault Address Registers
The fault status registers indicate the cause of a fault. For bus faults and memory management
faults, the fault address register indicates the address accessed by the operation that caused the
fault, as shown in Table 2-12 on page 85.
Table 2-12. Fault Status and Fault Address Registers
2.6.4
Handler
Status Register Name
Address Register Name
Register Description
Hard fault
Hard Fault Status (HFAULTSTAT)
-
page 144
Memory management Memory Management Fault Status
fault
(MFAULTSTAT)
Memory Management Fault
Address (MMADDR)
page 138
Bus fault
Bus Fault Status (BFAULTSTAT)
Bus Fault Address
(FAULTADDR)
page 138
Usage fault
Usage Fault Status (UFAULTSTAT)
-
page 138
page 145
page 146
Lockup
The processor enters a lockup state if a hard fault occurs when executing the NMI or hard fault
handlers. When the processor is in the lockup state, it does not execute any instructions. The
processor remains in lockup state until it is reset or an NMI occurs.
Note:
2.7
If the lockup state occurs from the NMI handler, a subsequent NMI does not cause the
processor to leave the lockup state.
Power Management
The Cortex-M3 processor sleep modes reduce power consumption:
■ Sleep mode stops the processor clock.
■ Deep-sleep mode stops the system clock and switches off the PLL and Flash memory.
The SLEEPDEEP bit of the System Control (SYSCTRL) register selects which sleep mode is used
(see page 127). For more information about the behavior of the sleep modes, see “System
Control” on page 182.
This section describes the mechanisms for entering sleep mode and the conditions for waking up
from sleep mode, both of which apply to Sleep mode and Deep-sleep mode.
2.7.1
Entering Sleep Modes
This section describes the mechanisms software can use to put the processor into one of the sleep
modes.
July 25, 2011
85
Texas Instruments-Production Data
The Cortex-M3 Processor
The system can generate spurious wake-up events, for example a debug operation wakes up the
processor. Therefore, software must be able to put the processor back into sleep mode after such
an event. A program might have an idle loop to put the processor back to sleep mode.
2.7.1.1
Wait for Interrupt
The wait for interrupt instruction, WFI, causes immediate entry to sleep mode unless the wake-up
condition is true (see “Wake Up from WFI or Sleep-on-Exit” on page 86). When the processor
executes a WFI instruction, it stops executing instructions and enters sleep mode. See the
Cortex™-M3 Instruction Set Technical User's Manual for more information.
2.7.1.2
Wait for Event
The wait for event instruction, WFE, causes entry to sleep mode conditional on the value of a one-bit
event register. When the processor executes a WFE instruction, it checks the event register. If the
register is 0, the processor stops executing instructions and enters sleep mode. If the register is 1,
the processor clears the register and continues executing instructions without entering sleep mode.
If the event register is 1, the processor must not enter sleep mode on execution of a WFE instruction.
Typically, this situation occurs if an SEV instruction has been executed. Software cannot access
this register directly.
See the Cortex™-M3 Instruction Set Technical User's Manual for more information.
2.7.1.3
Sleep-on-Exit
If the SLEEPEXIT bit of the SYSCTRL register is set, when the processor completes the execution
of an exception handler, it returns to Thread mode and immediately enters sleep mode. This
mechanism can be used in applications that only require the processor to run when an exception
occurs.
2.7.2
Wake Up from Sleep Mode
The conditions for the processor to wake up depend on the mechanism that cause it to enter sleep
mode.
2.7.2.1
Wake Up from WFI or Sleep-on-Exit
Normally, the processor wakes up only when it detects an exception with sufficient priority to cause
exception entry. Some embedded systems might have to execute system restore tasks after the
processor wakes up and before executing an interrupt handler. Entry to the interrupt handler can
be delayed by setting the PRIMASK bit and clearing the FAULTMASK bit. If an interrupt arrives that
is enabled and has a higher priority than current exception priority, the processor wakes up but does
not execute the interrupt handler until the processor clears PRIMASK. For more information about
PRIMASK and FAULTMASK, see page 63 and page 64.
2.7.2.2
Wake Up from WFE
The processor wakes up if it detects an exception with sufficient priority to cause exception entry.
In addition, if the SEVONPEND bit in the SYSCTRL register is set, any new pending interrupt triggers
an event and wakes up the processor, even if the interrupt is disabled or has insufficient priority to
cause exception entry. For more information about SYSCTRL, see page 127.
86
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
2.8
Instruction Set Summary
The processor implements a version of the Thumb instruction set. Table 2-13 on page 87 lists the
supported instructions.
Note:
In Table 2-13 on page 87:
■
■
■
■
■
Angle brackets, , enclose alternative forms of the operand
Braces, {}, enclose optional operands
The Operands column is not exhaustive
Op2 is a flexible second operand that can be either a register or a constant
Most instructions can use an optional condition code suffix
For more information on the instructions and operands, see the instruction descriptions in
the Cortex™-M3 Instruction Set Technical User's Manual.
Table 2-13. Cortex-M3 Instruction Summary
Mnemonic
Operands
Brief Description
Flags
ADC, ADCS
{Rd,} Rn, Op2
Add with carry
N,Z,C,V
ADD, ADDS
{Rd,} Rn, Op2
Add
N,Z,C,V
ADD, ADDW
{Rd,} Rn , #imm12
Add
N,Z,C,V
ADR
Rd, label
Load PC-relative address
-
AND, ANDS
{Rd,} Rn, Op2
Logical AND
N,Z,C
ASR, ASRS
Rd, Rm,
Arithmetic shift right
N,Z,C
B
label
Branch
-
BFC
Rd, #lsb, #width
Bit field clear
-
BFI
Rd, Rn, #lsb, #width
Bit field insert
-
BIC, BICS
{Rd,} Rn, Op2
Bit clear
N,Z,C
BKPT
#imm
Breakpoint
-
BL
label
Branch with link
-
BLX
Rm
Branch indirect with link
-
BX
Rm
Branch indirect
-
CBNZ
Rn, label
Compare and branch if non-zero
-
CBZ
Rn, label
Compare and branch if zero
-
CLREX
-
Clear exclusive
-
CLZ
Rd, Rm
Count leading zeros
-
CMN
Rn, Op2
Compare negative
N,Z,C,V
CMP
Rn, Op2
Compare
N,Z,C,V
CPSID
i
Change processor state, disable
interrupts
-
CPSIE
i
Change processor state, enable
interrupts
-
DMB
-
Data memory barrier
-
DSB
-
Data synchronization barrier
-
EOR, EORS
{Rd,} Rn, Op2
Exclusive OR
N,Z,C
ISB
-
Instruction synchronization barrier
-
IT
-
If-Then condition block
-
July 25, 2011
87
Texas Instruments-Production Data
The Cortex-M3 Processor
Table 2-13. Cortex-M3 Instruction Summary (continued)
Mnemonic
Operands
Brief Description
LDM
Rn{!}, reglist
Load multiple registers, increment after -
LDMDB, LDMEA
Rn{!}, reglist
Load multiple registers, decrement
before
LDMFD, LDMIA
Rn{!}, reglist
Load multiple registers, increment after -
LDR
Rt, [Rn, #offset]
Load register with word
-
LDRB, LDRBT
Rt, [Rn, #offset]
Load register with byte
-
LDRD
Rt, Rt2, [Rn, #offset]
Load register with two bytes
-
LDREX
Rt, [Rn, #offset]
Load register exclusive
-
LDREXB
Rt, [Rn]
Load register exclusive with byte
-
LDREXH
Rt, [Rn]
Load register exclusive with halfword
-
LDRH, LDRHT
Rt, [Rn, #offset]
Load register with halfword
-
LDRSB, LDRSBT
Rt, [Rn, #offset]
Load register with signed byte
-
LDRSH, LDRSHT
Rt, [Rn, #offset]
Load register with signed halfword
-
LDRT
Rt, [Rn, #offset]
Load register with word
-
LSL, LSLS
Rd, Rm,
Logical shift left
N,Z,C
LSR, LSRS
Rd, Rm,
Logical shift right
N,Z,C
MLA
Rd, Rn, Rm, Ra
Multiply with accumulate, 32-bit result
-
MLS
Rd, Rn, Rm, Ra
Multiply and subtract, 32-bit result
-
MOV, MOVS
Rd, Op2
Move
N,Z,C
MOV, MOVW
Rd, #imm16
Move 16-bit constant
N,Z,C
MOVT
Rd, #imm16
Move top
-
MRS
Rd, spec_reg
Move from special register to general
register
-
MSR
spec_reg, Rm
Move from general register to special
register
N,Z,C,V
MUL, MULS
{Rd,} Rn, Rm
Multiply, 32-bit result
N,Z
MVN, MVNS
Rd, Op2
Move NOT
N,Z,C
NOP
-
No operation
-
ORN, ORNS
{Rd,} Rn, Op2
Logical OR NOT
N,Z,C
ORR, ORRS
{Rd,} Rn, Op2
Logical OR
N,Z,C
POP
reglist
Pop registers from stack
-
PUSH
reglist
Push registers onto stack
-
RBIT
Rd, Rn
Reverse bits
-
REV
Rd, Rn
Reverse byte order in a word
-
REV16
Rd, Rn
Reverse byte order in each halfword
-
REVSH
Rd, Rn
Reverse byte order in bottom halfword
and sign extend
-
ROR, RORS
Rd, Rm,
Rotate right
N,Z,C
RRX, RRXS
Rd, Rm
Rotate right with extend
N,Z,C
RSB, RSBS
{Rd,} Rn, Op2
Reverse subtract
N,Z,C,V
SBC, SBCS
{Rd,} Rn, Op2
Subtract with carry
N,Z,C,V
SBFX
Rd, Rn, #lsb, #width
Signed bit field extract
-
88
Flags
-
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 2-13. Cortex-M3 Instruction Summary (continued)
Mnemonic
Operands
Brief Description
Flags
SDIV
{Rd,} Rn, Rm
Signed divide
-
SEV
-
Send event
-
SMLAL
RdLo, RdHi, Rn, Rm
Signed multiply with accumulate
(32x32+64), 64-bit result
-
SMULL
RdLo, RdHi, Rn, Rm
Signed multiply (32x32), 64-bit result
-
SSAT
Rd, #n, Rm {,shift #s}
Signed saturate
Q
STM
Rn{!}, reglist
Store multiple registers, increment after -
STMDB, STMEA
Rn{!}, reglist
Store multiple registers, decrement
before
STMFD, STMIA
Rn{!}, reglist
Store multiple registers, increment after -
STR
Rt, [Rn {, #offset}]
Store register word
-
STRB, STRBT
Rt, [Rn {, #offset}]
Store register byte
-
STRD
Rt, Rt2, [Rn {, #offset}]
Store register two words
-
STREX
Rt, Rt, [Rn {, #offset}]
Store register exclusive
-
STREXB
Rd, Rt, [Rn]
Store register exclusive byte
-
STREXH
Rd, Rt, [Rn]
Store register exclusive halfword
-
STRH, STRHT
Rt, [Rn {, #offset}]
Store register halfword
-
STRSB, STRSBT
Rt, [Rn {, #offset}]
Store register signed byte
-
STRSH, STRSHT
Rt, [Rn {, #offset}]
Store register signed halfword
-
STRT
Rt, [Rn {, #offset}]
Store register word
-
SUB, SUBS
{Rd,} Rn, Op2
Subtract
N,Z,C,V
SUB, SUBW
{Rd,} Rn, #imm12
Subtract 12-bit constant
N,Z,C,V
SVC
#imm
Supervisor call
-
SXTB
{Rd,} Rm {,ROR #n}
Sign extend a byte
-
SXTH
{Rd,} Rm {,ROR #n}
Sign extend a halfword
-
TBB
[Rn, Rm]
Table branch byte
-
TBH
[Rn, Rm, LSL #1]
Table branch halfword
-
TEQ
Rn, Op2
Test equivalence
N,Z,C
TST
Rn, Op2
Test
N,Z,C
UBFX
Rd, Rn, #lsb, #width
Unsigned bit field extract
-
UDIV
{Rd,} Rn, Rm
Unsigned divide
-
UMLAL
RdLo, RdHi, Rn, Rm
Unsigned multiply with accumulate
(32x32+32+32), 64-bit result
-
UMULL
RdLo, RdHi, Rn, Rm
Unsigned multiply (32x 2), 64-bit result -
USAT
Rd, #n, Rm {,shift #s}
Unsigned Saturate
Q
UXTB
{Rd,} Rm, {,ROR #n}
Zero extend a Byte
-
UXTH
{Rd,} Rm, {,ROR #n}
Zero extend a Halfword
-
USAT
Rd, #n, Rm {,shift #s}
Unsigned saturate
Q
UXTB
{Rd,} Rm {,ROR #n}
Zero extend a byte
-
UXTH
{Rd,} Rm {,ROR #n}
Zero extend a halfword
-
WFE
-
Wait for event
-
WFI
-
Wait for interrupt
-
July 25, 2011
-
89
Texas Instruments-Production Data
Cortex-M3 Peripherals
3
Cortex-M3 Peripherals
®
This chapter provides information on the Stellaris implementation of the Cortex-M3 processor
peripherals, including:
■ SysTick (see page 90)
Provides a simple, 24-bit clear-on-write, decrementing, wrap-on-zero counter with a flexible
control mechanism.
■ Nested Vectored Interrupt Controller (NVIC) (see page 91)
– Facilitates low-latency exception and interrupt handling
– Controls power management
– Implements system control registers
■ System Control Block (SCB) (see page 93)
Provides system implementation information and system control, including configuration, control,
and reporting of system exceptions.
■ Memory Protection Unit (MPU) (see page 93)
Supports the standard ARMv7 Protected Memory System Architecture (PMSA) model. The MPU
provides full support for protection regions, overlapping protection regions, access permissions,
and exporting memory attributes to the system.
Table 3-1 on page 90 shows the address map of the Private Peripheral Bus (PPB). Some peripheral
register regions are split into two address regions, as indicated by two addresses listed.
Table 3-1. Core Peripheral Register Regions
Address
Core Peripheral
Description (see page ...)
0xE000.E010-0xE000.E01F
System Timer
90
0xE000.E100-0xE000.E4EF
Nested Vectored Interrupt Controller
91
System Control Block
93
Memory Protection Unit
93
0xE000.EF00-0xE000.EF03
0xE000.E008-0xE000.E00F
0xE000.ED00-0xE000.ED3F
0xE000.ED90-0xE000.EDB8
3.1
Functional Description
This chapter provides information on the Stellaris implementation of the Cortex-M3 processor
peripherals: SysTick, NVIC, SCB and MPU.
3.1.1
System Timer (SysTick)
Cortex-M3 includes an integrated system timer, SysTick, which provides a simple, 24-bit
clear-on-write, decrementing, wrap-on-zero counter with a flexible control mechanism. The counter
can be used in several different ways, for example as:
■ An RTOS tick timer that fires at a programmable rate (for example, 100 Hz) and invokes a SysTick
routine.
■ A high-speed alarm timer using the system clock.
90
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ A variable rate alarm or signal timer—the duration is range-dependent on the reference clock
used and the dynamic range of the counter.
■ A simple counter used to measure time to completion and time used.
■ An internal clock source control based on missing/meeting durations. The COUNT bit in the
STCTRL control and status register can be used to determine if an action completed within a
set duration, as part of a dynamic clock management control loop.
The timer consists of three registers:
■ SysTick Control and Status (STCTRL): A control and status counter to configure its clock,
enable the counter, enable the SysTick interrupt, and determine counter status.
■ SysTick Reload Value (STRELOAD): The reload value for the counter, used to provide the
counter's wrap value.
■ SysTick Current Value (STCURRENT): The current value of the counter.
When enabled, the timer counts down on each clock from the reload value to zero, reloads (wraps)
to the value in the STRELOAD register on the next clock edge, then decrements on subsequent
clocks. Clearing the STRELOAD register disables the counter on the next wrap. When the counter
reaches zero, the COUNT status bit is set. The COUNT bit clears on reads.
Writing to the STCURRENT register clears the register and the COUNT status bit. The write does
not trigger the SysTick exception logic. On a read, the current value is the value of the register at
the time the register is accessed.
The SysTick counter runs on the system clock. If this clock signal is stopped for low power mode,
the SysTick counter stops. Ensure software uses aligned word accesses to access the SysTick
registers.
Note:
3.1.2
When the processor is halted for debugging, the counter does not decrement.
Nested Vectored Interrupt Controller (NVIC)
This section describes the Nested Vectored Interrupt Controller (NVIC) and the registers it uses.
The NVIC supports:
■ 37 interrupts.
■ A programmable priority level of 0-7 for each interrupt. A higher level corresponds to a lower
priority, so level 0 is the highest interrupt priority.
■ Low-latency exception and interrupt handling.
■ Level and pulse detection of interrupt signals.
■ Dynamic reprioritization of interrupts.
■ Grouping of priority values into group priority and subpriority fields.
■ Interrupt tail-chaining.
■ An external Non-maskable interrupt (NMI).
July 25, 2011
91
Texas Instruments-Production Data
Cortex-M3 Peripherals
The processor automatically stacks its state on exception entry and unstacks this state on exception
exit, with no instruction overhead, providing low latency exception handling.
3.1.2.1
Level-Sensitive and Pulse Interrupts
The processor supports both level-sensitive and pulse interrupts. Pulse interrupts are also described
as edge-triggered interrupts.
A level-sensitive interrupt is held asserted until the peripheral deasserts the interrupt signal. Typically
this happens because the ISR accesses the peripheral, causing it to clear the interrupt request. A
pulse interrupt is an interrupt signal sampled synchronously on the rising edge of the processor
clock. To ensure the NVIC detects the interrupt, the peripheral must assert the interrupt signal for
at least one clock cycle, during which the NVIC detects the pulse and latches the interrupt.
When the processor enters the ISR, it automatically removes the pending state from the interrupt
(see “Hardware and Software Control of Interrupts” on page 92 for more information). For a
level-sensitive interrupt, if the signal is not deasserted before the processor returns from the ISR,
the interrupt becomes pending again, and the processor must execute its ISR again. As a result,
the peripheral can hold the interrupt signal asserted until it no longer needs servicing.
3.1.2.2
Hardware and Software Control of Interrupts
The Cortex-M3 latches all interrupts. A peripheral interrupt becomes pending for one of the following
reasons:
■ The NVIC detects that the interrupt signal is High and the interrupt is not active.
■ The NVIC detects a rising edge on the interrupt signal.
■ Software writes to the corresponding interrupt set-pending register bit, or to the Software Trigger
Interrupt (SWTRIG) register to make a Software-Generated Interrupt pending. See the INT bit
in the PEND0 register on page 109 or SWTRIG on page 117.
A pending interrupt remains pending until one of the following:
■ The processor enters the ISR for the interrupt, changing the state of the interrupt from pending
to active. Then:
– For a level-sensitive interrupt, when the processor returns from the ISR, the NVIC samples
the interrupt signal. If the signal is asserted, the state of the interrupt changes to pending,
which might cause the processor to immediately re-enter the ISR. Otherwise, the state of the
interrupt changes to inactive.
– For a pulse interrupt, the NVIC continues to monitor the interrupt signal, and if this is pulsed
the state of the interrupt changes to pending and active. In this case, when the processor
returns from the ISR the state of the interrupt changes to pending, which might cause the
processor to immediately re-enter the ISR.
If the interrupt signal is not pulsed while the processor is in the ISR, when the processor
returns from the ISR the state of the interrupt changes to inactive.
■ Software writes to the corresponding interrupt clear-pending register bit
– For a level-sensitive interrupt, if the interrupt signal is still asserted, the state of the interrupt
does not change. Otherwise, the state of the interrupt changes to inactive.
92
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
– For a pulse interrupt, the state of the interrupt changes to inactive, if the state was pending
or to active, if the state was active and pending.
3.1.3
System Control Block (SCB)
The System Control Block (SCB) provides system implementation information and system control,
including configuration, control, and reporting of the system exceptions.
3.1.4
Memory Protection Unit (MPU)
This section describes the Memory protection unit (MPU). The MPU divides the memory map into
a number of regions and defines the location, size, access permissions, and memory attributes of
each region. The MPU supports independent attribute settings for each region, overlapping regions,
and export of memory attributes to the system.
The memory attributes affect the behavior of memory accesses to the region. The Cortex-M3 MPU
defines eight separate memory regions, 0-7, and a background region.
When memory regions overlap, a memory access is affected by the attributes of the region with the
highest number. For example, the attributes for region 7 take precedence over the attributes of any
region that overlaps region 7.
The background region has the same memory access attributes as the default memory map, but is
accessible from privileged software only.
The Cortex-M3 MPU memory map is unified, meaning that instruction accesses and data accesses
have the same region settings.
If a program accesses a memory location that is prohibited by the MPU, the processor generates
a memory management fault, causing a fault exception and possibly causing termination of the
process in an OS environment. In an OS environment, the kernel can update the MPU region setting
dynamically based on the process to be executed. Typically, an embedded OS uses the MPU for
memory protection.
Configuration of MPU regions is based on memory types (see “Memory Regions, Types and
Attributes” on page 69 for more information).
Table 3-2 on page 93 shows the possible MPU region attributes. See the section called “MPU
Configuration for a Stellaris Microcontroller” on page 97 for guidelines for programming a
microcontroller implementation.
Table 3-2. Memory Attributes Summary
Memory Type
Description
Strongly Ordered
All accesses to Strongly Ordered memory occur in program order.
Device
Memory-mapped peripherals
Normal
Normal memory
To avoid unexpected behavior, disable the interrupts before updating the attributes of a region that
the interrupt handlers might access.
Ensure software uses aligned accesses of the correct size to access MPU registers:
■ Except for the MPU Region Attribute and Size (MPUATTR) register, all MPU registers must
be accessed with aligned word accesses.
■ The MPUATTR register can be accessed with byte or aligned halfword or word accesses.
July 25, 2011
93
Texas Instruments-Production Data
Cortex-M3 Peripherals
The processor does not support unaligned accesses to MPU registers.
When setting up the MPU, and if the MPU has previously been programmed, disable unused regions
to prevent any previous region settings from affecting the new MPU setup.
3.1.4.1
Updating an MPU Region
To update the attributes for an MPU region, the MPU Region Number (MPUNUMBER), MPU
Region Base Address (MPUBASE) and MPUATTR registers must be updated. Each register can
be programmed separately or with a multiple-word write to program all of these registers. You can
use the MPUBASEx and MPUATTRx aliases to program up to four regions simultaneously using
an STM instruction.
Updating an MPU Region Using Separate Words
This example simple code configures one region:
; R1 = region number
; R2 = size/enable
; R3 = attributes
; R4 = address
LDR R0,=MPUNUMBER
STR R1, [R0, #0x0]
STR R4, [R0, #0x4]
STRH R2, [R0, #0x8]
STRH R3, [R0, #0xA]
;
;
;
;
;
0xE000ED98, MPU region number register
Region Number
Region Base Address
Region Size and Enable
Region Attribute
Disable a region before writing new region settings to the MPU if you have previously enabled the
region being changed. For example:
; R1 = region number
; R2 = size/enable
; R3 = attributes
; R4 = address
LDR R0,=MPUNUMBER
STR R1, [R0, #0x0]
BIC R2, R2, #1
STRH R2, [R0, #0x8]
STR R4, [R0, #0x4]
STRH R3, [R0, #0xA]
ORR R2, #1
STRH R2, [R0, #0x8]
;
;
;
;
;
;
;
;
0xE000ED98, MPU region number register
Region Number
Disable
Region Size and Enable
Region Base Address
Region Attribute
Enable
Region Size and Enable
Software must use memory barrier instructions:
■ Before MPU setup, if there might be outstanding memory transfers, such as buffered writes, that
might be affected by the change in MPU settings.
■ After MPU setup, if it includes memory transfers that must use the new MPU settings.
However, memory barrier instructions are not required if the MPU setup process starts by entering
an exception handler, or is followed by an exception return, because the exception entry and
exception return mechanism cause memory barrier behavior.
Software does not need any memory barrier instructions during MPU setup, because it accesses
the MPU through the Private Peripheral Bus (PPB), which is a Strongly Ordered memory region.
94
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
For example, if all of the memory access behavior is intended to take effect immediately after the
programming sequence, then a DSB instruction and an ISB instruction should be used. A DSB is
required after changing MPU settings, such as at the end of context switch. An ISB is required if
the code that programs the MPU region or regions is entered using a branch or call. If the
programming sequence is entered using a return from exception, or by taking an exception, then
an ISB is not required.
Updating an MPU Region Using Multi-Word Writes
The MPU can be programmed directly using multi-word writes, depending how the information is
divided. Consider the following reprogramming:
; R1 = region number
; R2 = address
; R3 = size, attributes in one
LDR R0, =MPUNUMBER ; 0xE000ED98, MPU region number register
STR R1, [R0, #0x0] ; Region Number
STR R2, [R0, #0x4] ; Region Base Address
STR R3, [R0, #0x8] ; Region Attribute, Size and Enable
An STM instruction can be used to optimize this:
; R1 = region number
; R2 = address
; R3 = size, attributes in one
LDR R0, =MPUNUMBER ; 0xE000ED98, MPU region number register
STM R0, {R1-R3}
; Region number, address, attribute, size and enable
This operation can be done in two words for pre-packed information, meaning that the MPU Region
Base Address (MPUBASE) register (see page 151) contains the required region number and has
the VALID bit set. This method can be used when the data is statically packed, for example in a
boot loader:
; R1 = address and region number in one
; R2 = size and attributes in one
LDR R0, =MPUBASE
; 0xE000ED9C, MPU Region Base register
STR R1, [R0, #0x0] ; Region base address and region number combined
; with VALID (bit 4) set
STR R2, [R0, #0x4] ; Region Attribute, Size and Enable
An STM instruction can be used to optimize this:
; R1 = address and region number in one
; R2 = size and attributes in one
LDR R0,=MPUBASE
; 0xE000ED9C, MPU Region Base register
STM R0, {R1-R2}
; Region base address, region number and VALID bit,
; and Region Attribute, Size and Enable
Subregions
Regions of 256 bytes or more are divided into eight equal-sized subregions. Set the corresponding
bit in the SRD field of the MPU Region Attribute and Size (MPUATTR) register (see page 153) to
disable a subregion. The least-significant bit of the SRD field controls the first subregion, and the
most-significant bit controls the last subregion. Disabling a subregion means another region
July 25, 2011
95
Texas Instruments-Production Data
Cortex-M3 Peripherals
overlapping the disabled range matches instead. If no other enabled region overlaps the disabled
subregion, the MPU issues a fault.
Regions of 32, 64, and 128 bytes do not support subregions. With regions of these sizes, the SRD
field must be configured to 0x00, otherwise the MPU behavior is unpredictable.
Example of SRD Use
Two regions with the same base address overlap. Region one is 128 KB, and region two is 512 KB.
To ensure the attributes from region one apply to the first 128 KB region, configure the SRD field for
region two to 0x03 to disable the first two subregions, as Figure 3-1 on page 96 shows.
Figure 3-1. SRD Use Example
Region 2, with
subregions
Region 1
Base address of both regions
3.1.4.2
Offset from
base address
512KB
448KB
384KB
320KB
256KB
192KB
128KB
Disabled subregion
64KB
Disabled subregion
0
MPU Access Permission Attributes
The access permission bits, TEX, S, C, B, AP, and XN of the MPUATTR register, control access to
the corresponding memory region. If an access is made to an area of memory without the required
permissions, then the MPU generates a permission fault.
Table 3-3 on page 96 shows the encodings for the TEX, C, B, and S access permission bits. All
encodings are shown for completeness, however the current implementation of the Cortex-M3 does
not support the concept of cacheability or shareability. Refer to the section called “MPU Configuration
for a Stellaris Microcontroller” on page 97 for information on programming the MPU for Stellaris
implementations.
Table 3-3. TEX, S, C, and B Bit Field Encoding
TEX
S
000b
x
C
B
Memory Type
Shareability
Other Attributes
a
0
0
Strongly Ordered
Shareable
-
a
-
000
x
0
1
Device
Shareable
000
0
1
0
Normal
Not shareable
000
1
1
0
Normal
Shareable
000
0
1
1
Normal
Not shareable
000
1
1
1
Normal
Shareable
001
0
0
0
Normal
Not shareable
001
1
001
x
Outer and inner
write-through. No write
allocate.
0
0
Normal
Shareable
Outer and inner
noncacheable.
a
0
1
Reserved encoding
-
-
a
001
x
1
0
Reserved encoding
-
-
001
0
1
1
Normal
Not shareable
001
1
1
1
Normal
Shareable
Outer and inner
write-back. Write and
read allocate.
96
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 3-3. TEX, S, C, and B Bit Field Encoding (continued)
TEX
S
Other Attributes
0
0
Device
Not shareable
Nonshared Device.
a
0
1
Reserved encoding
-
-
x
Shareability
x
Memory Type
010
B
010
C
a
a
a
010
x
1
x
Reserved encoding
-
-
1BB
0
A
A
Normal
Not shareable
1BB
1
A
A
Normal
Shareable
Cached memory (BB =
outer policy, AA = inner
policy).
See Table 3-4 for the
encoding of the AA and
BB bits.
a. The MPU ignores the value of this bit.
Table 3-4 on page 97 shows the cache policy for memory attribute encodings with a TEX value in
the range of 0x4-0x7.
Table 3-4. Cache Policy for Memory Attribute Encoding
Encoding, AA or BB
Corresponding Cache Policy
00
Non-cacheable
01
Write back, write and read allocate
10
Write through, no write allocate
11
Write back, no write allocate
Table 3-5 on page 97 shows the AP encodings in the MPUATTR register that define the access
permissions for privileged and unprivileged software.
Table 3-5. AP Bit Field Encoding
AP Bit Field
Privileged
Permissions
Unprivileged
Permissions
Description
000
No access
No access
All accesses generate a permission fault.
001
R/W
No access
Access from privileged software only.
010
R/W
RO
Writes by unprivileged software generate a
permission fault.
011
R/W
R/W
Full access.
100
Unpredictable
Unpredictable
Reserved.
101
RO
No access
Reads by privileged software only.
110
RO
RO
Read-only, by privileged or unprivileged software.
111
RO
RO
Read-only, by privileged or unprivileged software.
MPU Configuration for a Stellaris Microcontroller
Stellaris microcontrollers have only a single processor and no caches. As a result, the MPU should
be programmed as shown in Table 3-6 on page 97.
Table 3-6. Memory Region Attributes for Stellaris Microcontrollers
Memory Region
TEX
S
C
B
Memory Type and Attributes
Flash memory
000b
0
1
0
Normal memory, non-shareable, write-through
Internal SRAM
000b
1
1
0
Normal memory, shareable, write-through
July 25, 2011
97
Texas Instruments-Production Data
Cortex-M3 Peripherals
Table 3-6. Memory Region Attributes for Stellaris Microcontrollers (continued)
Memory Region
TEX
S
C
B
Memory Type and Attributes
External SRAM
000b
1
1
1
Normal memory, shareable, write-back,
write-allocate
Peripherals
000b
1
0
1
Device memory, shareable
In current Stellaris microcontroller implementations, the shareability and cache policy attributes do
not affect the system behavior. However, using these settings for the MPU regions can make the
application code more portable. The values given are for typical situations.
3.1.4.3
MPU Mismatch
When an access violates the MPU permissions, the processor generates a memory management
fault (see “Exceptions and Interrupts” on page 67 for more information). The MFAULTSTAT register
indicates the cause of the fault. See page 138 for more information.
3.2
Register Map
Table 3-7 on page 98 lists the Cortex-M3 Peripheral SysTick, NVIC, SCB, and MPU registers. The
offset listed is a hexadecimal increment to the register's address, relative to the Core Peripherals
base address of 0xE000.E000.
Note:
Register spaces that are not used are reserved for future or internal use. Software should
not modify any reserved memory address.
Table 3-7. Peripherals Register Map
Offset
Name
Type
Reset
Description
See
page
System Timer (SysTick) Registers
0x010
STCTRL
R/W
0x0000.0004
SysTick Control and Status Register
101
0x014
STRELOAD
R/W
0x0000.0000
SysTick Reload Value Register
103
0x018
STCURRENT
R/WC
0x0000.0000
SysTick Current Value Register
104
Nested Vectored Interrupt Controller (NVIC) Registers
0x100
EN0
R/W
0x0000.0000
Interrupt 0-31 Set Enable
105
0x104
EN1
R/W
0x0000.0000
Interrupt 32-54 Set Enable
106
0x180
DIS0
R/W
0x0000.0000
Interrupt 0-31 Clear Enable
107
0x184
DIS1
R/W
0x0000.0000
Interrupt 32-54 Clear Enable
108
0x200
PEND0
R/W
0x0000.0000
Interrupt 0-31 Set Pending
109
0x204
PEND1
R/W
0x0000.0000
Interrupt 32-54 Set Pending
110
0x280
UNPEND0
R/W
0x0000.0000
Interrupt 0-31 Clear Pending
111
0x284
UNPEND1
R/W
0x0000.0000
Interrupt 32-54 Clear Pending
112
0x300
ACTIVE0
RO
0x0000.0000
Interrupt 0-31 Active Bit
113
0x304
ACTIVE1
RO
0x0000.0000
Interrupt 32-54 Active Bit
114
0x400
PRI0
R/W
0x0000.0000
Interrupt 0-3 Priority
115
98
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 3-7. Peripherals Register Map (continued)
Description
See
page
Offset
Name
Type
Reset
0x404
PRI1
R/W
0x0000.0000
Interrupt 4-7 Priority
115
0x408
PRI2
R/W
0x0000.0000
Interrupt 8-11 Priority
115
0x40C
PRI3
R/W
0x0000.0000
Interrupt 12-15 Priority
115
0x410
PRI4
R/W
0x0000.0000
Interrupt 16-19 Priority
115
0x414
PRI5
R/W
0x0000.0000
Interrupt 20-23 Priority
115
0x418
PRI6
R/W
0x0000.0000
Interrupt 24-27 Priority
115
0x41C
PRI7
R/W
0x0000.0000
Interrupt 28-31 Priority
115
0x420
PRI8
R/W
0x0000.0000
Interrupt 32-35 Priority
115
0x424
PRI9
R/W
0x0000.0000
Interrupt 36-39 Priority
115
0x428
PRI10
R/W
0x0000.0000
Interrupt 40-43 Priority
115
0x42C
PRI11
R/W
0x0000.0000
Interrupt 44-47 Priority
115
0x430
PRI12
R/W
0x0000.0000
Interrupt 48-51 Priority
115
0x434
PRI13
R/W
0x0000.0000
Interrupt 52-54 Priority
115
0xF00
SWTRIG
WO
0x0000.0000
Software Trigger Interrupt
117
System Control Block (SCB) Registers
0x008
ACTLR
R/W
0x0000.0000
Auxiliary Control
118
0xD00
CPUID
RO
0x412F.C230
CPU ID Base
120
0xD04
INTCTRL
R/W
0x0000.0000
Interrupt Control and State
121
0xD08
VTABLE
R/W
0x0000.0000
Vector Table Offset
124
0xD0C
APINT
R/W
0xFA05.0000
Application Interrupt and Reset Control
125
0xD10
SYSCTRL
R/W
0x0000.0000
System Control
127
0xD14
CFGCTRL
R/W
0x0000.0200
Configuration and Control
129
0xD18
SYSPRI1
R/W
0x0000.0000
System Handler Priority 1
131
0xD1C
SYSPRI2
R/W
0x0000.0000
System Handler Priority 2
132
0xD20
SYSPRI3
R/W
0x0000.0000
System Handler Priority 3
133
0xD24
SYSHNDCTRL
R/W
0x0000.0000
System Handler Control and State
134
0xD28
FAULTSTAT
R/W1C
0x0000.0000
Configurable Fault Status
138
0xD2C
HFAULTSTAT
R/W1C
0x0000.0000
Hard Fault Status
144
0xD34
MMADDR
R/W
-
Memory Management Fault Address
145
0xD38
FAULTADDR
R/W
-
Bus Fault Address
146
MPU Type
147
Memory Protection Unit (MPU) Registers
0xD90
MPUTYPE
RO
0x0000.0800
July 25, 2011
99
Texas Instruments-Production Data
Cortex-M3 Peripherals
Table 3-7. Peripherals Register Map (continued)
Offset
Name
Type
Reset
Description
See
page
0xD94
MPUCTRL
R/W
0x0000.0000
MPU Control
148
0xD98
MPUNUMBER
R/W
0x0000.0000
MPU Region Number
150
0xD9C
MPUBASE
R/W
0x0000.0000
MPU Region Base Address
151
0xDA0
MPUATTR
R/W
0x0000.0000
MPU Region Attribute and Size
153
0xDA4
MPUBASE1
R/W
0x0000.0000
MPU Region Base Address Alias 1
151
0xDA8
MPUATTR1
R/W
0x0000.0000
MPU Region Attribute and Size Alias 1
153
0xDAC
MPUBASE2
R/W
0x0000.0000
MPU Region Base Address Alias 2
151
0xDB0
MPUATTR2
R/W
0x0000.0000
MPU Region Attribute and Size Alias 2
153
0xDB4
MPUBASE3
R/W
0x0000.0000
MPU Region Base Address Alias 3
151
0xDB8
MPUATTR3
R/W
0x0000.0000
MPU Region Attribute and Size Alias 3
153
3.3
System Timer (SysTick) Register Descriptions
This section lists and describes the System Timer registers, in numerical order by address offset.
100
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 1: SysTick Control and Status Register (STCTRL), offset 0x010
Note:
This register can only be accessed from privileged mode.
The SysTick STCTRL register enables the SysTick features.
SysTick Control and Status Register (STCTRL)
Base 0xE000.E000
Offset 0x010
Type R/W, reset 0x0000.0004
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
9
8
7
6
5
4
3
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
16
COUNT
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
2
1
0
CLK_SRC
INTEN
ENABLE
R/W
1
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:17
reserved
RO
0x000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
16
COUNT
RO
0
Count Flag
Value
Description
0
The SysTick timer has not counted to 0 since the last time
this bit was read.
1
The SysTick timer has counted to 0 since the last time
this bit was read.
This bit is cleared by a read of the register or if the STCURRENT register
is written with any value.
If read by the debugger using the DAP, this bit is cleared only if the
MasterType bit in the AHB-AP Control Register is clear. Otherwise,
the COUNT bit is not changed by the debugger read. See the ARM®
Debug Interface V5 Architecture Specification for more information on
MasterType.
15:3
reserved
RO
0x000
2
CLK_SRC
R/W
1
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Clock Source
Value Description
0
External reference clock. (Not implemented for Stellaris
microcontrollers.)
1
System clock
Because an external reference clock is not implemented, this bit must
be set in order for SysTick to operate.
July 25, 2011
101
Texas Instruments-Production Data
Cortex-M3 Peripherals
Bit/Field
Name
Type
Reset
1
INTEN
R/W
0
0
ENABLE
R/W
0
Description
Interrupt Enable
Value
Description
0
Interrupt generation is disabled. Software can use the
COUNT bit to determine if the counter has ever reached 0.
1
An interrupt is generated to the NVIC when SysTick counts
to 0.
Enable
Value
Description
0
The counter is disabled.
1
Enables SysTick to operate in a multi-shot way. That is, the
counter loads the RELOAD value and begins counting down.
On reaching 0, the COUNT bit is set and an interrupt is
generated if enabled by INTEN. The counter then loads the
RELOAD value again and begins counting.
102
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 2: SysTick Reload Value Register (STRELOAD), offset 0x014
Note:
This register can only be accessed from privileged mode.
The STRELOAD register specifies the start value to load into the SysTick Current Value
(STCURRENT) register when the counter reaches 0. The start value can be between 0x1 and
0x00FF.FFFF. A start value of 0 is possible but has no effect because the SysTick interrupt and the
COUNT bit are activated when counting from 1 to 0.
SysTick can be configured as a multi-shot timer, repeated over and over, firing every N+1 clock
pulses, where N is any value from 1 to 0x00FF.FFFF. For example, if a tick interrupt is required
every 100 clock pulses, 99 must be written into the RELOAD field.
SysTick Reload Value Register (STRELOAD)
Base 0xE000.E000
Offset 0x014
Type R/W, reset 0x0000.0000
31
30
29
28
RO
0
RO
0
RO
0
RO
0
15
14
13
R/W
0
R/W
0
R/W
0
27
26
25
24
23
22
21
20
18
17
16
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
19
RELOAD
RELOAD
Type
Reset
Bit/Field
Name
Type
Reset
Description
31:24
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
23:0
RELOAD
R/W
0x00.0000
Reload Value
Value to load into the SysTick Current Value (STCURRENT) register
when the counter reaches 0.
July 25, 2011
103
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 3: SysTick Current Value Register (STCURRENT), offset 0x018
Note:
This register can only be accessed from privileged mode.
The STCURRENT register contains the current value of the SysTick counter.
SysTick Current Value Register (STCURRENT)
Base 0xE000.E000
Offset 0x018
Type R/WC, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
reserved
Type
Reset
20
19
18
17
16
CURRENT
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
CURRENT
Type
Reset
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
R/WC
0
Bit/Field
Name
Type
Reset
Description
31:24
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
23:0
CURRENT
R/WC
0x00.0000
Current Value
This field contains the current value at the time the register is accessed.
No read-modify-write protection is provided, so change with care.
This register is write-clear. Writing to it with any value clears the register.
Clearing this register also clears the COUNT bit of the STCTRL register.
3.4
NVIC Register Descriptions
This section lists and describes the NVIC registers, in numerical order by address offset.
The NVIC registers can only be fully accessed from privileged mode, but interrupts can be pended
while in unprivileged mode by enabling the Configuration and Control (CFGCTRL) register. Any
other unprivileged mode access causes a bus fault.
Ensure software uses correctly aligned register accesses. The processor does not support unaligned
accesses to NVIC registers.
An interrupt can enter the pending state even if it is disabled.
Before programming the VTABLE register to relocate the vector table, ensure the vector table
entries of the new vector table are set up for fault handlers, NMI, and all enabled exceptions such
as interrupts. For more information, see page 124.
104
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 4: Interrupt 0-31 Set Enable (EN0), offset 0x100
Note:
This register can only be accessed from privileged mode.
See Table 2-9 on page 78 for interrupt assignments.
If a pending interrupt is enabled, the NVIC activates the interrupt based on its priority. If an interrupt
is not enabled, asserting its interrupt signal changes the interrupt state to pending, but the NVIC
never activates the interrupt, regardless of its priority.
Interrupt 0-31 Set Enable (EN0)
Base 0xE000.E000
Offset 0x100
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
INT
Type
Reset
INT
Type
Reset
Bit/Field
Name
Type
31:0
INT
R/W
Reset
Description
0x0000.0000 Interrupt Enable
Value
Description
0
On a read, indicates the interrupt is disabled.
On a write, no effect.
1
On a read, indicates the interrupt is enabled.
On a write, enables the interrupt.
A bit can only be cleared by setting the corresponding INT[n] bit in
the DISn register.
July 25, 2011
105
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 5: Interrupt 32-54 Set Enable (EN1), offset 0x104
Note:
This register can only be accessed from privileged mode.
The EN1 register enables interrupts and shows which interrupts are enabled. Bit 0 corresponds to
Interrupt 32; bit 22 corresponds to Interrupt 54. See Table 2-9 on page 78 for interrupt assignments.
If a pending interrupt is enabled, the NVIC activates the interrupt based on its priority. If an interrupt
is not enabled, asserting its interrupt signal changes the interrupt state to pending, but the NVIC
never activates the interrupt, regardless of its priority.
Interrupt 32-54 Set Enable (EN1)
Base 0xE000.E000
Offset 0x104
Type R/W, reset 0x0000.0000
31
30
29
28
RO
0
RO
0
RO
0
RO
0
15
14
13
R/W
0
R/W
0
R/W
0
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
INT
INT
Type
Reset
Bit/Field
Name
Type
Reset
Description
31:23
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
22:0
INT
R/W
0x00.0000
Interrupt Enable
Value
Description
0
On a read, indicates the interrupt is disabled.
On a write, no effect.
1
On a read, indicates the interrupt is enabled.
On a write, enables the interrupt.
A bit can only be cleared by setting the corresponding INT[n] bit in
the DIS1 register.
106
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 6: Interrupt 0-31 Clear Enable (DIS0), offset 0x180
Note:
This register can only be accessed from privileged mode.
See Table 2-9 on page 78 for interrupt assignments.
Interrupt 0-31 Clear Enable (DIS0)
Base 0xE000.E000
Offset 0x180
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
INT
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
INT
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
31:0
INT
R/W
R/W
0
Reset
R/W
0
Description
0x0000.0000 Interrupt Disable
Value Description
0
On a read, indicates the interrupt is disabled.
On a write, no effect.
1
On a read, indicates the interrupt is enabled.
On a write, clears the corresponding INT[n] bit in the EN0
register, disabling interrupt [n].
July 25, 2011
107
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 7: Interrupt 32-54 Clear Enable (DIS1), offset 0x184
Note:
This register can only be accessed from privileged mode.
The DIS1 register disables interrupts. Bit 0 corresponds to Interrupt 32; bit 22 corresponds to Interrupt
54. See Table 2-9 on page 78 for interrupt assignments.
Interrupt 32-54 Clear Enable (DIS1)
Base 0xE000.E000
Offset 0x184
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
reserved
Type
Reset
19
18
17
16
INT
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
INT
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:23
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
22:0
INT
R/W
0x00.0000
Interrupt Disable
Value Description
0
On a read, indicates the interrupt is disabled.
On a write, no effect.
1
On a read, indicates the interrupt is enabled.
On a write, clears the corresponding INT[n] bit in the EN1
register, disabling interrupt [n].
108
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 8: Interrupt 0-31 Set Pending (PEND0), offset 0x200
Note:
This register can only be accessed from privileged mode.
See Table 2-9 on page 78 for interrupt assignments.
Interrupt 0-31 Set Pending (PEND0)
Base 0xE000.E000
Offset 0x200
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
INT
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
INT
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
31:0
INT
R/W
R/W
0
Reset
R/W
0
Description
0x0000.0000 Interrupt Set Pending
Value
Description
0
On a read, indicates that the interrupt is not pending.
On a write, no effect.
1
On a read, indicates that the interrupt is pending.
On a write, the corresponding interrupt is set to pending
even if it is disabled.
If the corresponding interrupt is already pending, setting a bit has no
effect.
A bit can only be cleared by setting the corresponding INT[n] bit in
the UNPEND0 register.
July 25, 2011
109
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 9: Interrupt 32-54 Set Pending (PEND1), offset 0x204
Note:
This register can only be accessed from privileged mode.
The PEND1 register forces interrupts into the pending state and shows which interrupts are pending.
Bit 0 corresponds to Interrupt 32; bit 22 corresponds to Interrupt 54. See Table 2-9 on page 78 for
interrupt assignments.
Interrupt 32-54 Set Pending (PEND1)
Base 0xE000.E000
Offset 0x204
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
reserved
Type
Reset
19
18
17
16
INT
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
INT
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:23
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
22:0
INT
R/W
0x00.0000
Interrupt Set Pending
Value
Description
0
On a read, indicates that the interrupt is not pending.
On a write, no effect.
1
On a read, indicates that the interrupt is pending.
On a write, the corresponding interrupt is set to pending
even if it is disabled.
If the corresponding interrupt is already pending, setting a bit has no
effect.
A bit can only be cleared by setting the corresponding INT[n] bit in
the UNPEND1 register.
110
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 10: Interrupt 0-31 Clear Pending (UNPEND0), offset 0x280
Note:
This register can only be accessed from privileged mode.
See Table 2-9 on page 78 for interrupt assignments.
Interrupt 0-31 Clear Pending (UNPEND0)
Base 0xE000.E000
Offset 0x280
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
INT
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
INT
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
31:0
INT
R/W
R/W
0
Reset
R/W
0
Description
0x0000.0000 Interrupt Clear Pending
Value Description
0
On a read, indicates that the interrupt is not pending.
On a write, no effect.
1
On a read, indicates that the interrupt is pending.
On a write, clears the corresponding INT[n] bit in the PEND0
register, so that interrupt [n] is no longer pending.
Setting a bit does not affect the active state of the corresponding
interrupt.
July 25, 2011
111
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 11: Interrupt 32-54 Clear Pending (UNPEND1), offset 0x284
Note:
This register can only be accessed from privileged mode.
The UNPEND1 register shows which interrupts are pending and removes the pending state from
interrupts. Bit 0 corresponds to Interrupt 32; bit 22 corresponds to Interrupt 54. See Table
2-9 on page 78 for interrupt assignments.
Interrupt 32-54 Clear Pending (UNPEND1)
Base 0xE000.E000
Offset 0x284
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
reserved
Type
Reset
19
18
17
16
INT
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
INT
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:23
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
22:0
INT
R/W
0x00.0000
Interrupt Clear Pending
Value Description
0
On a read, indicates that the interrupt is not pending.
On a write, no effect.
1
On a read, indicates that the interrupt is pending.
On a write, clears the corresponding INT[n] bit in the PEND1
register, so that interrupt [n] is no longer pending.
Setting a bit does not affect the active state of the corresponding
interrupt.
112
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 12: Interrupt 0-31 Active Bit (ACTIVE0), offset 0x300
Note:
This register can only be accessed from privileged mode.
See Table 2-9 on page 78 for interrupt assignments.
Caution – Do not manually set or clear the bits in this register.
Interrupt 0-31 Active Bit (ACTIVE0)
Base 0xE000.E000
Offset 0x300
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
INT
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
INT
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
31:0
INT
RO
RO
0
Reset
RO
0
Description
0x0000.0000 Interrupt Active
Value Description
0
The corresponding interrupt is not active.
1
The corresponding interrupt is active, or active and pending.
July 25, 2011
113
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 13: Interrupt 32-54 Active Bit (ACTIVE1), offset 0x304
Note:
This register can only be accessed from privileged mode.
The ACTIVE1 register indicates which interrupts are active. Bit 0 corresponds to Interrupt 32; bit
22 corresponds to Interrupt 54. See Table 2-9 on page 78 for interrupt assignments.
Caution – Do not manually set or clear the bits in this register.
Interrupt 32-54 Active Bit (ACTIVE1)
Base 0xE000.E000
Offset 0x304
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
reserved
Type
Reset
19
18
17
16
INT
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
INT
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:23
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
22:0
INT
RO
0x00.0000
Interrupt Active
Value Description
0
The corresponding interrupt is not active.
1
The corresponding interrupt is active, or active and pending.
114
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 14: Interrupt 0-3 Priority (PRI0), offset 0x400
Register 15: Interrupt 4-7 Priority (PRI1), offset 0x404
Register 16: Interrupt 8-11 Priority (PRI2), offset 0x408
Register 17: Interrupt 12-15 Priority (PRI3), offset 0x40C
Register 18: Interrupt 16-19 Priority (PRI4), offset 0x410
Register 19: Interrupt 20-23 Priority (PRI5), offset 0x414
Register 20: Interrupt 24-27 Priority (PRI6), offset 0x418
Register 21: Interrupt 28-31 Priority (PRI7), offset 0x41C
Register 22: Interrupt 32-35 Priority (PRI8), offset 0x420
Register 23: Interrupt 36-39 Priority (PRI9), offset 0x424
Register 24: Interrupt 40-43 Priority (PRI10), offset 0x428
Register 25: Interrupt 44-47 Priority (PRI11), offset 0x42C
Register 26: Interrupt 48-51 Priority (PRI12), offset 0x430
Register 27: Interrupt 52-54 Priority (PRI13), offset 0x434
Note:
This register can only be accessed from privileged mode.
The PRIn registers provide 3-bit priority fields for each interrupt. These registers are byte accessible.
Each register holds four priority fields that are assigned to interrupts as follows:
PRIn Register Bit Field
Interrupt
Bits 31:29
Interrupt [4n+3]
Bits 23:21
Interrupt [4n+2]
Bits 15:13
Interrupt [4n+1]
Bits 7:5
Interrupt [4n]
See Table 2-9 on page 78 for interrupt assignments.
Each priority level can be split into separate group priority and subpriority fields. The PRIGROUP
field in the Application Interrupt and Reset Control (APINT) register (see page 125) indicates the
position of the binary point that splits the priority and subpriority fields.
These registers can only be accessed from privileged mode.
July 25, 2011
115
Texas Instruments-Production Data
Cortex-M3 Peripherals
Interrupt 0-3 Priority (PRI0)
Base 0xE000.E000
Offset 0x400
Type R/W, reset 0x0000.0000
31
30
29
28
27
INTD
Type
Reset
25
24
23
reserved
22
21
20
19
INTC
18
17
16
reserved
R/W
0
R/W
0
R/W
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
RO
0
RO
0
RO
0
RO
0
INTB
Type
Reset
26
R/W
0
R/W
0
reserved
RO
0
INTA
Bit/Field
Name
Type
Reset
31:29
INTD
R/W
0x0
R/W
0
reserved
RO
0
Description
Interrupt Priority for Interrupt [4n+3]
This field holds a priority value, 0-7, for the interrupt with the number
[4n+3], where n is the number of the Interrupt Priority register (n=0 for
PRI0, and so on). The lower the value, the greater the priority of the
corresponding interrupt.
28:24
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
23:21
INTC
R/W
0x0
Interrupt Priority for Interrupt [4n+2]
This field holds a priority value, 0-7, for the interrupt with the number
[4n+2], where n is the number of the Interrupt Priority register (n=0 for
PRI0, and so on). The lower the value, the greater the priority of the
corresponding interrupt.
20:16
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15:13
INTB
R/W
0x0
Interrupt Priority for Interrupt [4n+1]
This field holds a priority value, 0-7, for the interrupt with the number
[4n+1], where n is the number of the Interrupt Priority register (n=0 for
PRI0, and so on). The lower the value, the greater the priority of the
corresponding interrupt.
12:8
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7:5
INTA
R/W
0x0
Interrupt Priority for Interrupt [4n]
This field holds a priority value, 0-7, for the interrupt with the number
[4n], where n is the number of the Interrupt Priority register (n=0 for
PRI0, and so on). The lower the value, the greater the priority of the
corresponding interrupt.
4:0
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
116
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 28: Software Trigger Interrupt (SWTRIG), offset 0xF00
Note:
Only privileged software can enable unprivileged access to the SWTRIG register.
Writing an interrupt number to the SWTRIG register generates a Software Generated Interrupt (SGI).
See Table 2-9 on page 78 for interrupt assignments.
When the MAINPEND bit in the Configuration and Control (CFGCTRL) register (see page 129) is
set, unprivileged software can access the SWTRIG register.
Software Trigger Interrupt (SWTRIG)
Base 0xE000.E000
Offset 0xF00
Type WO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
INTID
Bit/Field
Name
Type
Reset
31:6
reserved
RO
0x0000.00
5:0
INTID
WO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Interrupt ID
This field holds the interrupt ID of the required SGI. For example, a value
of 0x3 generates an interrupt on IRQ3.
3.5
System Control Block (SCB) Register Descriptions
This section lists and describes the System Control Block (SCB) registers, in numerical order by
address offset. The SCB registers can only be accessed from privileged mode.
All registers must be accessed with aligned word accesses except for the FAULTSTAT and
SYSPRI1-SYSPRI3 registers, which can be accessed with byte or aligned halfword or word accesses.
The processor does not support unaligned accesses to system control block registers.
July 25, 2011
117
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 29: Auxiliary Control (ACTLR), offset 0x008
Note:
This register can only be accessed from privileged mode.
The ACTLR register provides disable bits for IT folding, write buffer use for accesses to the default
memory map, and interruption of multi-cycle instructions. By default, this register is set to provide
optimum performance from the Cortex-M3 processor and does not normally require modification.
Auxiliary Control (ACTLR)
Base 0xE000.E000
Offset 0x008
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
2
1
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
9
8
7
6
5
4
3
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:3
reserved
RO
0x0000.000
2
DISFOLD
R/W
0
DISFOLD DISWBUF DISMCYC
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Disable IT Folding
Value Description
0
No effect.
1
Disables IT folding.
In some situations, the processor can start executing the first instruction
in an IT block while it is still executing the IT instruction. This behavior
is called IT folding, and improves performance, However, IT folding can
cause jitter in looping. If a task must avoid jitter, set the DISFOLD bit
before executing the task, to disable IT folding.
1
DISWBUF
R/W
0
Disable Write Buffer
Value Description
0
No effect.
1
Disables write buffer use during default memory map accesses.
In this situation, all bus faults are precise bus faults but
performance is decreased because any store to memory must
complete before the processor can execute the next instruction.
Note:
This bit only affects write buffers implemented in the
Cortex-M3 processor.
118
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
0
DISMCYC
R/W
0
Description
Disable Interrupts of Multiple Cycle Instructions
Value Description
0
No effect.
1
Disables interruption of load multiple and store multiple
instructions. In this situation, the interrupt latency of the
processor is increased because any LDM or STM must complete
before the processor can stack the current state and enter the
interrupt handler.
July 25, 2011
119
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 30: CPU ID Base (CPUID), offset 0xD00
Note:
This register can only be accessed from privileged mode.
The CPUID register contains the ARM® Cortex™-M3 processor part number, version, and
implementation information.
CPU ID Base (CPUID)
Base 0xE000.E000
Offset 0xD00
Type RO, reset 0x412F.C230
31
30
29
28
27
26
25
24
23
22
IMP
Type
Reset
21
20
19
18
VAR
R0
0
R0
1
R0
0
R0
0
R0
0
R0
0
R0
0
R0
1
RO
0
RO
0
RO
1
RO
0
RO
1
RO
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
PARTNO
Type
Reset
RO
1
RO
1
RO
0
RO
0
RO
0
RO
0
RO
1
17
16
RO
1
RO
1
1
0
RO
0
RO
0
CON
REV
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:24
IMP
R0
0x41
Implementer Code
RO
1
RO
1
RO
0
RO
0
Value Description
0x41 ARM
23:20
VAR
RO
0x2
Variant Number
Value Description
0x2
19:16
CON
RO
0xF
The rn value in the rnpn product revision identifier, for example,
the 2 in r2p0.
Constant
Value Description
0xF
15:4
PARTNO
RO
0xC23
Always reads as 0xF.
Part Number
Value Description
0xC23 Cortex-M3 processor.
3:0
REV
RO
0x0
Revision Number
Value Description
0x0
The pn value in the rnpn product revision identifier, for example,
the 0 in r2p0.
120
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 31: Interrupt Control and State (INTCTRL), offset 0xD04
Note:
This register can only be accessed from privileged mode.
The INCTRL register provides a set-pending bit for the NMI exception, and set-pending and
clear-pending bits for the PendSV and SysTick exceptions. In addition, bits in this register indicate
the exception number of the exception being processed, whether there are preempted active
exceptions, the exception number of the highest priority pending exception, and whether any interrupts
are pending.
When writing to INCTRL, the effect is unpredictable when writing a 1 to both the PENDSV and
UNPENDSV bits, or writing a 1 to both the PENDSTSET and PENDSTCLR bits.
Interrupt Control and State (INTCTRL)
Base 0xE000.E000
Offset 0xD04
Type R/W, reset 0x0000.0000
31
NMISET
Type
Reset
30
29
reserved
28
26
25
24
PENDSV UNPENDSV PENDSTSET PENDSTCLR reserved
23
22
21
ISRPRE ISRPEND
20
19
18
reserved
17
16
VECPEND
R/W
0
RO
0
RO
0
R/W
0
WO
0
R/W
0
WO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
VECPEND
Type
Reset
27
RO
0
RETBASE
RO
0
reserved
RO
0
Bit/Field
Name
Type
Reset
31
NMISET
R/W
0
VECACT
RO
0
Description
NMI Set Pending
Value Description
0
On a read, indicates an NMI exception is not pending.
On a write, no effect.
1
On a read, indicates an NMI exception is pending.
On a write, changes the NMI exception state to pending.
Because NMI is the highest-priority exception, normally the processor
enters the NMI exception handler as soon as it registers the setting of
this bit, and clears this bit on entering the interrupt handler. A read of
this bit by the NMI exception handler returns 1 only if the NMI signal is
reasserted while the processor is executing that handler.
30:29
reserved
RO
0x0
28
PENDSV
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
PendSV Set Pending
Value Description
0
On a read, indicates a PendSV exception is not pending.
On a write, no effect.
1
On a read, indicates a PendSV exception is pending.
On a write, changes the PendSV exception state to pending.
Setting this bit is the only way to set the PendSV exception state to
pending. This bit is cleared by writing a 1 to the UNPENDSV bit.
July 25, 2011
121
Texas Instruments-Production Data
Cortex-M3 Peripherals
Bit/Field
Name
Type
Reset
27
UNPENDSV
WO
0
Description
PendSV Clear Pending
Value Description
0
On a write, no effect.
1
On a write, removes the pending state from the PendSV
exception.
This bit is write only; on a register read, its value is unknown.
26
PENDSTSET
R/W
0
SysTick Set Pending
Value Description
0
On a read, indicates a SysTick exception is not pending.
On a write, no effect.
1
On a read, indicates a SysTick exception is pending.
On a write, changes the SysTick exception state to pending.
This bit is cleared by writing a 1 to the PENDSTCLR bit.
25
PENDSTCLR
WO
0
SysTick Clear Pending
Value Description
0
On a write, no effect.
1
On a write, removes the pending state from the SysTick
exception.
This bit is write only; on a register read, its value is unknown.
24
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
23
ISRPRE
RO
0
Debug Interrupt Handling
Value Description
0
The release from halt does not take an interrupt.
1
The release from halt takes an interrupt.
This bit is only meaningful in Debug mode and reads as zero when the
processor is not in Debug mode.
22
ISRPEND
RO
0
Interrupt Pending
Value Description
0
No interrupt is pending.
1
An interrupt is pending.
This bit provides status for all interrupts excluding NMI and Faults.
21:19
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
122
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
Description
18:12
VECPEND
RO
0x00
Interrupt Pending Vector Number
This field contains the exception number of the highest priority pending
enabled exception. The value indicated by this field includes the effect
of the BASEPRI and FAULTMASK registers, but not any effect of the
PRIMASK register.
Value
Description
0x00
No exceptions are pending
0x01
Reserved
0x02
NMI
0x03
Hard fault
0x04
Memory management fault
0x05
Bus fault
0x06
Usage fault
0x07-0x0A Reserved
0x0B
SVCall
0x0C
Reserved for Debug
0x0D
Reserved
0x0E
PendSV
0x0F
SysTick
0x10
Interrupt Vector 0
0x11
Interrupt Vector 1
...
...
0x46
Interrupt Vector 54
0x47-0x7F Reserved
11
RETBASE
RO
0
Return to Base
Value Description
0
There are preempted active exceptions to execute.
1
There are no active exceptions, or the currently executing
exception is the only active exception.
This bit provides status for all interrupts excluding NMI and Faults. This
bit only has meaning if the processor is currently executing an ISR (the
Interrupt Program Status (IPSR) register is non-zero).
10:7
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
6:0
VECACT
RO
0x00
Interrupt Pending Vector Number
This field contains the active exception number. The exception numbers
can be found in the description for the VECPEND field. If this field is clear,
the processor is in Thread mode. This field contains the same value as
the ISRNUM field in the IPSR register.
Subtract 16 from this value to obtain the IRQ number required to index
into the Interrupt Set Enable (ENn), Interrupt Clear Enable (DISn),
Interrupt Set Pending (PENDn), Interrupt Clear Pending (UNPENDn),
and Interrupt Priority (PRIn) registers (see page 59).
July 25, 2011
123
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 32: Vector Table Offset (VTABLE), offset 0xD08
Note:
This register can only be accessed from privileged mode.
The VTABLE register indicates the offset of the vector table base address from memory address
0x0000.0000.
Vector Table Offset (VTABLE)
Base 0xE000.E000
Offset 0xD08
Type R/W, reset 0x0000.0000
31
30
reserved
Type
Reset
29
28
27
26
25
24
23
BASE
RO
0
RO
0
R/W
0
15
14
13
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
OFFSET
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
12
11
10
9
8
7
6
5
OFFSET
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
reserved
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
31:30
reserved
RO
0x0
29
BASE
R/W
0
RO
0
RO
0
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Vector Table Base
Value Description
28:9
OFFSET
R/W
0x000.00
0
The vector table is in the code memory region.
1
The vector table is in the SRAM memory region.
Vector Table Offset
When configuring the OFFSET field, the offset must be aligned to the
number of exception entries in the vector table. Because there are 54
interrupts, the minimum alignment is 128 words.
8:0
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
124
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 33: Application Interrupt and Reset Control (APINT), offset 0xD0C
Note:
This register can only be accessed from privileged mode.
The APINT register provides priority grouping control for the exception model, endian status for
data accesses, and reset control of the system. To write to this register, 0x05FA must be written to
the VECTKEY field, otherwise the write is ignored.
The PRIGROUP field indicates the position of the binary point that splits the INTx fields in the
Interrupt Priority (PRIx) registers into separate group priority and subpriority fields. Table
3-8 on page 125 shows how the PRIGROUP value controls this split. The bit numbers in the Group
Priority Field and Subpriority Field columns in the table refer to the bits in the INTA field. For the
INTB field, the corresponding bits are 15:13; for INTC, 23:21; and for INTD, 31:29.
Note:
Determining preemption of an exception uses only the group priority field.
Table 3-8. Interrupt Priority Levels
a
PRIGROUP Bit Field
Binary Point
Group Priority Field Subpriority Field
Group
Priorities
Subpriorities
0x0 - 0x4
bxxx.
[7:5]
None
8
1
0x5
bxx.y
[7:6]
[5]
4
2
0x6
bx.yy
[7]
[6:5]
2
4
0x7
b.yyy
None
[7:5]
1
8
a. INTx field showing the binary point. An x denotes a group priority field bit, and a y denotes a subpriority field bit.
Application Interrupt and Reset Control (APINT)
Base 0xE000.E000
Offset 0xD0C
Type R/W, reset 0xFA05.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
1
R/W
0
R/W
1
5
4
3
2
1
0
VECTKEY
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
0
15
14
13
12
11
10
reserved
ENDIANESS
Type
Reset
RO
0
RO
0
RO
0
RO
0
R/W
1
R/W
0
R/W
0
R/W
0
9
8
7
6
PRIGROUP
RO
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
31:16
VECTKEY
R/W
0xFA05
reserved
R/W
0
RO
0
RO
0
RO
0
SYSRESREQ VECTCLRACT VECTRESET
RO
0
RO
0
WO
0
WO
0
WO
0
Description
Register Key
This field is used to guard against accidental writes to this register.
0x05FA must be written to this field in order to change the bits in this
register. On a read, 0xFA05 is returned.
15
ENDIANESS
RO
0
Data Endianess
The Stellaris implementation uses only little-endian mode so this is
cleared to 0.
14:11
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
125
Texas Instruments-Production Data
Cortex-M3 Peripherals
Bit/Field
Name
Type
Reset
10:8
PRIGROUP
R/W
0x0
Description
Interrupt Priority Grouping
This field determines the split of group priority from subpriority (see
Table 3-8 on page 125 for more information).
7:3
reserved
RO
0x0
2
SYSRESREQ
WO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
System Reset Request
Value Description
0
No effect.
1
Resets the core and all on-chip peripherals except the Debug
interface.
This bit is automatically cleared during the reset of the core and reads
as 0.
1
VECTCLRACT
WO
0
Clear Active NMI / Fault
This bit is reserved for Debug use and reads as 0. This bit must be
written as a 0, otherwise behavior is unpredictable.
0
VECTRESET
WO
0
System Reset
This bit is reserved for Debug use and reads as 0. This bit must be
written as a 0, otherwise behavior is unpredictable.
126
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 34: System Control (SYSCTRL), offset 0xD10
Note:
This register can only be accessed from privileged mode.
The SYSCTRL register controls features of entry to and exit from low-power state.
System Control (SYSCTRL)
Base 0xE000.E000
Offset 0xD10
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
2
1
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
10
9
8
7
6
5
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:5
reserved
RO
0x0000.00
4
SEVONPEND
R/W
0
RO
0
RO
0
RO
0
RO
0
4
3
SEVONPEND
reserved
R/W
0
RO
0
SLEEPDEEP SLEEPEXIT
R/W
0
R/W
0
0
reserved
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Wake Up on Pending
Value Description
0
Only enabled interrupts or events can wake up the processor;
disabled interrupts are excluded.
1
Enabled events and all interrupts, including disabled interrupts,
can wake up the processor.
When an event or interrupt enters the pending state, the event signal
wakes up the processor from WFE. If the processor is not waiting for an
event, the event is registered and affects the next WFE.
The processor also wakes up on execution of a SEV instruction or an
external event.
3
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
2
SLEEPDEEP
R/W
0
Deep Sleep Enable
Value Description
0
Use Sleep mode as the low power mode.
1
Use Deep-sleep mode as the low power mode.
July 25, 2011
127
Texas Instruments-Production Data
Cortex-M3 Peripherals
Bit/Field
Name
Type
Reset
1
SLEEPEXIT
R/W
0
Description
Sleep on ISR Exit
Value Description
0
When returning from Handler mode to Thread mode, do not
sleep when returning to Thread mode.
1
When returning from Handler mode to Thread mode, enter sleep
or deep sleep on return from an ISR.
Setting this bit enables an interrupt-driven application to avoid returning
to an empty main application.
0
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
128
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 35: Configuration and Control (CFGCTRL), offset 0xD14
Note:
This register can only be accessed from privileged mode.
The CFGCTRL register controls entry to Thread mode and enables: the handlers for NMI, hard fault
and faults escalated by the FAULTMASK register to ignore bus faults; trapping of divide by zero
and unaligned accesses; and access to the SWTRIG register by unprivileged software (see page 117).
Configuration and Control (CFGCTRL)
Base 0xE000.E000
Offset 0xD14
Type R/W, reset 0x0000.0200
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
6
5
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
9
8
7
reserved
STKALIGN BFHFNMIGN
RO
0
RO
0
R/W
1
Bit/Field
Name
Type
Reset
31:10
reserved
RO
0x0000.00
9
STKALIGN
R/W
1
R/W
0
RO
0
RO
0
RO
0
4
3
2
1
0
DIV0
UNALIGNED
reserved
MAINPEND
BASETHR
R/W
0
R/W
0
RO
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Stack Alignment on Exception Entry
Value Description
0
The stack is 4-byte aligned.
1
The stack is 8-byte aligned.
On exception entry, the processor uses bit 9 of the stacked PSR to
indicate the stack alignment. On return from the exception, it uses this
stacked bit to restore the correct stack alignment.
8
BFHFNMIGN
R/W
0
Ignore Bus Fault in NMI and Fault
This bit enables handlers with priority -1 or -2 to ignore data bus faults
caused by load and store instructions. The setting of this bit applies to
the hard fault, NMI, and FAULTMASK escalated handlers.
Value Description
0
Data bus faults caused by load and store instructions cause a
lock-up.
1
Handlers running at priority -1 and -2 ignore data bus faults
caused by load and store instructions.
Set this bit only when the handler and its data are in absolutely safe
memory. The normal use of this bit is to probe system devices and
bridges to detect control path problems and fix them.
7:5
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
129
Texas Instruments-Production Data
Cortex-M3 Peripherals
Bit/Field
Name
Type
Reset
4
DIV0
R/W
0
Description
Trap on Divide by 0
This bit enables faulting or halting when the processor executes an
SDIV or UDIV instruction with a divisor of 0.
Value Description
3
UNALIGNED
R/W
0
0
Do not trap on divide by 0. A divide by zero returns a quotient
of 0.
1
Trap on divide by 0.
Trap on Unaligned Access
Value Description
0
Do not trap on unaligned halfword and word accesses.
1
Trap on unaligned halfword and word accesses. An unaligned
access generates a usage fault.
Unaligned LDM, STM, LDRD, and STRD instructions always fault
regardless of whether UNALIGNED is set.
2
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
1
MAINPEND
R/W
0
Allow Main Interrupt Trigger
Value Description
0
BASETHR
R/W
0
0
Disables unprivileged software access to the SWTRIG register.
1
Enables unprivileged software access to the SWTRIG register
(see page 117).
Thread State Control
Value Description
0
The processor can enter Thread mode only when no exception
is active.
1
The processor can enter Thread mode from any level under the
control of an EXC_RETURN value (see “Exception
Return” on page 82 for more information).
130
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 36: System Handler Priority 1 (SYSPRI1), offset 0xD18
Note:
This register can only be accessed from privileged mode.
The SYSPRI1 register configures the priority level, 0 to 7 of the usage fault, bus fault, and memory
management fault exception handlers. This register is byte-accessible.
System Handler Priority 1 (SYSPRI1)
Base 0xE000.E000
Offset 0xD18
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
reserved
Type
Reset
RO
0
15
RO
0
RO
0
RO
0
RO
0
14
13
12
11
BUS
Type
Reset
R/W
0
R/W
0
RO
0
RO
0
RO
0
R/W
0
10
9
8
7
reserved
R/W
0
RO
0
22
21
20
19
USAGE
RO
0
RO
0
R/W
0
R/W
0
RO
0
RO
0
6
5
4
3
MEM
RO
0
RO
0
R/W
0
R/W
0
18
17
16
RO
0
RO
0
RO
0
2
1
0
RO
0
RO
0
reserved
reserved
R/W
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:24
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
23:21
USAGE
R/W
0x0
Usage Fault Priority
This field configures the priority level of the usage fault. Configurable
priority values are in the range 0-7, with lower values having higher
priority.
20:16
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15:13
BUS
R/W
0x0
Bus Fault Priority
This field configures the priority level of the bus fault. Configurable priority
values are in the range 0-7, with lower values having higher priority.
12:8
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7:5
MEM
R/W
0x0
Memory Management Fault Priority
This field configures the priority level of the memory management fault.
Configurable priority values are in the range 0-7, with lower values
having higher priority.
4:0
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
131
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 37: System Handler Priority 2 (SYSPRI2), offset 0xD1C
Note:
This register can only be accessed from privileged mode.
The SYSPRI2 register configures the priority level, 0 to 7 of the SVCall handler. This register is
byte-accessible.
System Handler Priority 2 (SYSPRI2)
Base 0xE000.E000
Offset 0xD1C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
SVC
Type
Reset
22
21
20
19
18
17
16
reserved
R/W
0
R/W
0
R/W
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:29
SVC
R/W
0x0
RO
0
Description
SVCall Priority
This field configures the priority level of SVCall. Configurable priority
values are in the range 0-7, with lower values having higher priority.
28:0
reserved
RO
0x000.0000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
132
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 38: System Handler Priority 3 (SYSPRI3), offset 0xD20
Note:
This register can only be accessed from privileged mode.
The SYSPRI3 register configures the priority level, 0 to 7 of the SysTick exception and PendSV
handlers. This register is byte-accessible.
System Handler Priority 3 (SYSPRI3)
Base 0xE000.E000
Offset 0xD20
Type R/W, reset 0x0000.0000
31
30
29
28
27
TICK
Type
Reset
26
25
24
23
reserved
R/W
0
R/W
0
R/W
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
15
14
13
12
11
10
9
8
7
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
22
21
20
19
PENDSV
R/W
0
R/W
0
RO
0
RO
0
6
5
4
3
DEBUG
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:29
TICK
R/W
0x0
RO
0
R/W
0
R/W
0
18
17
16
RO
0
RO
0
RO
0
2
1
0
RO
0
RO
0
reserved
reserved
R/W
0
RO
0
RO
0
RO
0
Description
SysTick Exception Priority
This field configures the priority level of the SysTick exception.
Configurable priority values are in the range 0-7, with lower values
having higher priority.
28:24
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
23:21
PENDSV
R/W
0x0
PendSV Priority
This field configures the priority level of PendSV. Configurable priority
values are in the range 0-7, with lower values having higher priority.
20:8
reserved
RO
0x000
7:5
DEBUG
R/W
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Debug Priority
This field configures the priority level of Debug. Configurable priority
values are in the range 0-7, with lower values having higher priority.
4:0
reserved
RO
0x0.0000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
133
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 39: System Handler Control and State (SYSHNDCTRL), offset 0xD24
Note:
This register can only be accessed from privileged mode.
The SYSHNDCTRL register enables the system handlers, and indicates the pending status of the
usage fault, bus fault, memory management fault, and SVC exceptions as well as the active status
of the system handlers.
If a system handler is disabled and the corresponding fault occurs, the processor treats the fault as
a hard fault.
This register can be modified to change the pending or active status of system exceptions. An OS
kernel can write to the active bits to perform a context switch that changes the current exception
type.
Caution – Software that changes the value of an active bit in this register without correct adjustment
to the stacked content can cause the processor to generate a fault exception. Ensure software that writes
to this register retains and subsequently restores the current active status.
If the value of a bit in this register must be modified after enabling the system handlers, a
read-modify-write procedure must be used to ensure that only the required bit is modified.
System Handler Control and State (SYSHNDCTRL)
Base 0xE000.E000
Offset 0xD24
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
SVC
BUSP
MEMP
USAGEP
R/W
0
R/W
0
R/W
0
R/W
0
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
USAGE
BUS
MEM
R/W
0
R/W
0
R/W
0
10
9
8
7
6
5
4
3
2
1
0
TICK
PNDSV
reserved
MON
SVCA
R/W
0
R/W
0
RO
0
R/W
0
R/W
0
USGA
reserved
BUSA
MEMA
R/W
0
RO
0
R/W
0
R/W
0
reserved
Type
Reset
Type
Reset
reserved
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:19
reserved
RO
0x000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
18
USAGE
R/W
0
Usage Fault Enable
Value Description
17
BUS
R/W
0
0
Disables the usage fault exception.
1
Enables the usage fault exception.
Bus Fault Enable
Value Description
0
Disables the bus fault exception.
1
Enables the bus fault exception.
134
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
16
MEM
R/W
0
Description
Memory Management Fault Enable
Value Description
15
SVC
R/W
0
0
Disables the memory management fault exception.
1
Enables the memory management fault exception.
SVC Call Pending
Value Description
0
An SVC call exception is not pending.
1
An SVC call exception is pending.
This bit can be modified to change the pending status of the SVC call
exception.
14
BUSP
R/W
0
Bus Fault Pending
Value Description
0
A bus fault exception is not pending.
1
A bus fault exception is pending.
This bit can be modified to change the pending status of the bus fault
exception.
13
MEMP
R/W
0
Memory Management Fault Pending
Value Description
0
A memory management fault exception is not pending.
1
A memory management fault exception is pending.
This bit can be modified to change the pending status of the memory
management fault exception.
12
USAGEP
R/W
0
Usage Fault Pending
Value Description
0
A usage fault exception is not pending.
1
A usage fault exception is pending.
This bit can be modified to change the pending status of the usage fault
exception.
11
TICK
R/W
0
SysTick Exception Active
Value Description
0
A SysTick exception is not active.
1
A SysTick exception is active.
This bit can be modified to change the active status of the SysTick
exception, however, see the Caution above before setting this bit.
July 25, 2011
135
Texas Instruments-Production Data
Cortex-M3 Peripherals
Bit/Field
Name
Type
Reset
10
PNDSV
R/W
0
Description
PendSV Exception Active
Value Description
0
A PendSV exception is not active.
1
A PendSV exception is active.
This bit can be modified to change the active status of the PendSV
exception, however, see the Caution above before setting this bit.
9
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
8
MON
R/W
0
Debug Monitor Active
Value Description
7
SVCA
R/W
0
0
The Debug monitor is not active.
1
The Debug monitor is active.
SVC Call Active
Value Description
0
SVC call is not active.
1
SVC call is active.
This bit can be modified to change the active status of the SVC call
exception, however, see the Caution above before setting this bit.
6:4
reserved
RO
0x0
3
USGA
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Usage Fault Active
Value Description
0
Usage fault is not active.
1
Usage fault is active.
This bit can be modified to change the active status of the usage fault
exception, however, see the Caution above before setting this bit.
2
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
1
BUSA
R/W
0
Bus Fault Active
Value Description
0
Bus fault is not active.
1
Bus fault is active.
This bit can be modified to change the active status of the bus fault
exception, however, see the Caution above before setting this bit.
136
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
0
MEMA
R/W
0
Description
Memory Management Fault Active
Value Description
0
Memory management fault is not active.
1
Memory management fault is active.
This bit can be modified to change the active status of the memory
management fault exception, however, see the Caution above before
setting this bit.
July 25, 2011
137
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 40: Configurable Fault Status (FAULTSTAT), offset 0xD28
Note:
This register can only be accessed from privileged mode.
The FAULTSTAT register indicates the cause of a memory management fault, bus fault, or usage
fault. Each of these functions is assigned to a subregister as follows:
■ Usage Fault Status (UFAULTSTAT), bits 31:16
■ Bus Fault Status (BFAULTSTAT), bits 15:8
■ Memory Management Fault Status (MFAULTSTAT), bits 7:0
FAULTSTAT is byte accessible. FAULTSTAT or its subregisters can be accessed as follows:
■
■
■
■
■
The complete FAULTSTAT register, with a word access to offset 0xD28
The MFAULTSTAT, with a byte access to offset 0xD28
The MFAULTSTAT and BFAULTSTAT, with a halfword access to offset 0xD28
The BFAULTSTAT, with a byte access to offset 0xD29
The UFAULTSTAT, with a halfword access to offset 0xD2A
Bits are cleared by writing a 1 to them.
In a fault handler, the true faulting address can be determined by:
1. Read and save the Memory Management Fault Address (MMADDR) or Bus Fault Address
(FAULTADDR) value.
2. Read the MMARV bit in MFAULTSTAT, or the BFARV bit in BFAULTSTAT to determine if the
MMADDR or FAULTADDR contents are valid.
Software must follow this sequence because another higher priority exception might change the
MMADDR or FAULTADDR value. For example, if a higher priority handler preempts the current
fault handler, the other fault might change the MMADDR or FAULTADDR value.
Configurable Fault Status (FAULTSTAT)
Base 0xE000.E000
Offset 0xD28
Type R/W1C, reset 0x0000.0000
31
30
29
28
27
26
reserved
Type
Reset
RO
0
RO
0
RO
0
15
14
13
BFARV
Type
Reset
R/W1C
0
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
25
24
DIV0
UNALIGN
R/W1C
0
R/W1C
0
23
22
21
20
reserved
RO
0
RO
0
RO
0
6
5
12
11
10
9
8
7
BSTKE
BUSTKE
IMPRE
PRECISE
IBUS
MMARV
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
reserved
RO
0
RO
0
RO
0
19
18
17
16
NOCP
INVPC
INVSTAT
UNDEF
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
4
3
2
1
0
MSTKE
MUSTKE
reserved
DERR
IERR
R/W1C
0
R/W1C
0
RO
0
R/W1C
0
R/W1C
0
Bit/Field
Name
Type
Reset
Description
31:26
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
138
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
25
DIV0
R/W1C
0
Description
Divide-by-Zero Usage Fault
Value Description
0
No divide-by-zero fault has occurred, or divide-by-zero trapping
is not enabled.
1
The processor has executed an SDIV or UDIV instruction with
a divisor of 0.
When this bit is set, the PC value stacked for the exception return points
to the instruction that performed the divide by zero.
Trapping on divide-by-zero is enabled by setting the DIV0 bit in the
Configuration and Control (CFGCTRL) register (see page 129).
This bit is cleared by writing a 1 to it.
24
UNALIGN
R/W1C
0
Unaligned Access Usage Fault
Value Description
0
No unaligned access fault has occurred, or unaligned access
trapping is not enabled.
1
The processor has made an unaligned memory access.
Unaligned LDM, STM, LDRD, and STRD instructions always fault
regardless of the configuration of this bit.
Trapping on unaligned access is enabled by setting the UNALIGNED bit
in the CFGCTRL register (see page 129).
This bit is cleared by writing a 1 to it.
23:20
reserved
RO
0x00
19
NOCP
R/W1C
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
No Coprocessor Usage Fault
Value Description
0
A usage fault has not been caused by attempting to access a
coprocessor.
1
The processor has attempted to access a coprocessor.
This bit is cleared by writing a 1 to it.
18
INVPC
R/W1C
0
Invalid PC Load Usage Fault
Value Description
0
A usage fault has not been caused by attempting to load an
invalid PC value.
1
The processor has attempted an illegal load of EXC_RETURN
to the PC as a result of an invalid context or an invalid
EXC_RETURN value.
When this bit is set, the PC value stacked for the exception return points
to the instruction that tried to perform the illegal load of the PC.
This bit is cleared by writing a 1 to it.
July 25, 2011
139
Texas Instruments-Production Data
Cortex-M3 Peripherals
Bit/Field
Name
Type
Reset
17
INVSTAT
R/W1C
0
Description
Invalid State Usage Fault
Value Description
0
A usage fault has not been caused by an invalid state.
1
The processor has attempted to execute an instruction that
makes illegal use of the EPSR register.
When this bit is set, the PC value stacked for the exception return points
to the instruction that attempted the illegal use of the Execution
Program Status Register (EPSR) register.
This bit is not set if an undefined instruction uses the EPSR register.
This bit is cleared by writing a 1 to it.
16
UNDEF
R/W1C
0
Undefined Instruction Usage Fault
Value Description
0
A usage fault has not been caused by an undefined instruction.
1
The processor has attempted to execute an undefined
instruction.
When this bit is set, the PC value stacked for the exception return points
to the undefined instruction.
An undefined instruction is an instruction that the processor cannot
decode.
This bit is cleared by writing a 1 to it.
15
BFARV
R/W1C
0
Bus Fault Address Register Valid
Value Description
0
The value in the Bus Fault Address (FAULTADDR) register
is not a valid fault address.
1
The FAULTADDR register is holding a valid fault address.
This bit is set after a bus fault, where the address is known. Other faults
can clear this bit, such as a memory management fault occurring later.
If a bus fault occurs and is escalated to a hard fault because of priority,
the hard fault handler must clear this bit. This action prevents problems
if returning to a stacked active bus fault handler whose FAULTADDR
register value has been overwritten.
This bit is cleared by writing a 1 to it.
14:13
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
140
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
12
BSTKE
R/W1C
0
Description
Stack Bus Fault
Value Description
0
No bus fault has occurred on stacking for exception entry.
1
Stacking for an exception entry has caused one or more bus
faults.
When this bit is set, the SP is still adjusted but the values in the context
area on the stack might be incorrect. A fault address is not written to
the FAULTADDR register.
This bit is cleared by writing a 1 to it.
11
BUSTKE
R/W1C
0
Unstack Bus Fault
Value Description
0
No bus fault has occurred on unstacking for a return from
exception.
1
Unstacking for a return from exception has caused one or more
bus faults.
This fault is chained to the handler. Thus, when this bit is set, the original
return stack is still present. The SP is not adjusted from the failing return,
a new save is not performed, and a fault address is not written to the
FAULTADDR register.
This bit is cleared by writing a 1 to it.
10
IMPRE
R/W1C
0
Imprecise Data Bus Error
Value Description
0
An imprecise data bus error has not occurred.
1
A data bus error has occurred, but the return address in the
stack frame is not related to the instruction that caused the error.
When this bit is set, a fault address is not written to the FAULTADDR
register.
This fault is asynchronous. Therefore, if the fault is detected when the
priority of the current process is higher than the bus fault priority, the
bus fault becomes pending and becomes active only when the processor
returns from all higher-priority processes. If a precise fault occurs before
the processor enters the handler for the imprecise bus fault, the handler
detects that both the IMPRE bit is set and one of the precise fault status
bits is set.
This bit is cleared by writing a 1 to it.
9
PRECISE
R/W1C
0
Precise Data Bus Error
Value Description
0
A precise data bus error has not occurred.
1
A data bus error has occurred, and the PC value stacked for
the exception return points to the instruction that caused the
fault.
When this bit is set, the fault address is written to the FAULTADDR
register.
This bit is cleared by writing a 1 to it.
July 25, 2011
141
Texas Instruments-Production Data
Cortex-M3 Peripherals
Bit/Field
Name
Type
Reset
8
IBUS
R/W1C
0
Description
Instruction Bus Error
Value Description
0
An instruction bus error has not occurred.
1
An instruction bus error has occurred.
The processor detects the instruction bus error on prefetching an
instruction, but sets this bit only if it attempts to issue the faulting
instruction.
When this bit is set, a fault address is not written to the FAULTADDR
register.
This bit is cleared by writing a 1 to it.
7
MMARV
R/W1C
0
Memory Management Fault Address Register Valid
Value Description
0
The value in the Memory Management Fault Address
(MMADDR) register is not a valid fault address.
1
The MMADDR register is holding a valid fault address.
If a memory management fault occurs and is escalated to a hard fault
because of priority, the hard fault handler must clear this bit. This action
prevents problems if returning to a stacked active memory management
fault handler whose MMADDR register value has been overwritten.
This bit is cleared by writing a 1 to it.
6:5
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
4
MSTKE
R/W1C
0
Stack Access Violation
Value Description
0
No memory management fault has occurred on stacking for
exception entry.
1
Stacking for an exception entry has caused one or more access
violations.
When this bit is set, the SP is still adjusted but the values in the context
area on the stack might be incorrect. A fault address is not written to
the MMADDR register.
This bit is cleared by writing a 1 to it.
142
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
3
MUSTKE
R/W1C
0
Description
Unstack Access Violation
Value Description
0
No memory management fault has occurred on unstacking for
a return from exception.
1
Unstacking for a return from exception has caused one or more
access violations.
This fault is chained to the handler. Thus, when this bit is set, the original
return stack is still present. The SP is not adjusted from the failing return,
a new save is not performed, and a fault address is not written to the
MMADDR register.
This bit is cleared by writing a 1 to it.
2
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
1
DERR
R/W1C
0
Data Access Violation
Value Description
0
A data access violation has not occurred.
1
The processor attempted a load or store at a location that does
not permit the operation.
When this bit is set, the PC value stacked for the exception return points
to the faulting instruction and the address of the attempted access is
written to the MMADDR register.
This bit is cleared by writing a 1 to it.
0
IERR
R/W1C
0
Instruction Access Violation
Value Description
0
An instruction access violation has not occurred.
1
The processor attempted an instruction fetch from a location
that does not permit execution.
This fault occurs on any access to an XN region, even when the MPU
is disabled or not present.
When this bit is set, the PC value stacked for the exception return points
to the faulting instruction and the address of the attempted access is
not written to the MMADDR register.
This bit is cleared by writing a 1 to it.
July 25, 2011
143
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 41: Hard Fault Status (HFAULTSTAT), offset 0xD2C
Note:
This register can only be accessed from privileged mode.
The HFAULTSTAT register gives information about events that activate the hard fault handler.
Bits are cleared by writing a 1 to them.
Hard Fault Status (HFAULTSTAT)
Base 0xE000.E000
Offset 0xD2C
Type R/W1C, reset 0x0000.0000
Type
Reset
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
DBG
FORCED
R/W1C
0
R/W1C
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
VECT
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W1C
0
RO
0
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31
DBG
R/W1C
0
Description
Debug Event
This bit is reserved for Debug use. This bit must be written as a 0,
otherwise behavior is unpredictable.
30
FORCED
R/W1C
0
Forced Hard Fault
Value Description
0
No forced hard fault has occurred.
1
A forced hard fault has been generated by escalation of a fault
with configurable priority that cannot be handled, either because
of priority or because it is disabled.
When this bit is set, the hard fault handler must read the other fault
status registers to find the cause of the fault.
This bit is cleared by writing a 1 to it.
29:2
reserved
RO
0x00
1
VECT
R/W1C
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Vector Table Read Fault
Value Description
0
No bus fault has occurred on a vector table read.
1
A bus fault occurred on a vector table read.
This error is always handled by the hard fault handler.
When this bit is set, the PC value stacked for the exception return points
to the instruction that was preempted by the exception.
This bit is cleared by writing a 1 to it.
0
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
144
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 42: Memory Management Fault Address (MMADDR), offset 0xD34
Note:
This register can only be accessed from privileged mode.
The MMADDR register contains the address of the location that generated a memory management
fault. When an unaligned access faults, the address in the MMADDR register is the actual address
that faulted. Because a single read or write instruction can be split into multiple aligned accesses,
the fault address can be any address in the range of the requested access size. Bits in the Memory
Management Fault Status (MFAULTSTAT) register indicate the cause of the fault and whether
the value in the MMADDR register is valid (see page 138).
Memory Management Fault Address (MMADDR)
Base 0xE000.E000
Offset 0xD34
Type R/W, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
7
6
5
4
3
2
1
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
ADDR
Type
Reset
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
15
14
13
12
11
10
9
8
ADDR
Type
Reset
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
Bit/Field
Name
Type
Reset
31:0
ADDR
R/W
-
R/W
-
Description
Fault Address
When the MMARV bit of MFAULTSTAT is set, this field holds the address
of the location that generated the memory management fault.
July 25, 2011
145
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 43: Bus Fault Address (FAULTADDR), offset 0xD38
Note:
This register can only be accessed from privileged mode.
The FAULTADDR register contains the address of the location that generated a bus fault. When
an unaligned access faults, the address in the FAULTADDR register is the one requested by the
instruction, even if it is not the address of the fault. Bits in the Bus Fault Status (BFAULTSTAT)
register indicate the cause of the fault and whether the value in the FAULTADDR register is valid
(see page 138).
Bus Fault Address (FAULTADDR)
Base 0xE000.E000
Offset 0xD38
Type R/W, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
7
6
5
4
3
2
1
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
ADDR
Type
Reset
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
15
14
13
12
11
10
9
8
ADDR
Type
Reset
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
Bit/Field
Name
Type
Reset
31:0
ADDR
R/W
-
R/W
-
Description
Fault Address
When the FAULTADDRV bit of BFAULTSTAT is set, this field holds the
address of the location that generated the bus fault.
3.6
Memory Protection Unit (MPU) Register Descriptions
This section lists and describes the Memory Protection Unit (MPU) registers, in numerical order by
address offset.
The MPU registers can only be accessed from privileged mode.
146
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 44: MPU Type (MPUTYPE), offset 0xD90
Note:
This register can only be accessed from privileged mode.
The MPUTYPE register indicates whether the MPU is present, and if so, how many regions it
supports.
MPU Type (MPUTYPE)
Base 0xE000.E000
Offset 0xD90
Type RO, reset 0x0000.0800
31
30
29
28
27
26
25
24
23
22
21
20
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
DREGION
Type
Reset
RO
0
RO
0
RO
0
RO
0
19
18
17
16
RO
0
IREGION
RO
0
RO
0
RO
0
RO
0
4
3
2
1
reserved
RO
1
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
0
SEPARATE
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:24
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
23:16
IREGION
RO
0x00
Number of I Regions
This field indicates the number of supported MPU instruction regions.
This field always contains 0x00. The MPU memory map is unified and
is described by the DREGION field.
15:8
DREGION
RO
0x08
Number of D Regions
Value Description
0x08 Indicates there are eight supported MPU data regions.
7:1
reserved
RO
0x00
0
SEPARATE
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Separate or Unified MPU
Value Description
0
Indicates the MPU is unified.
July 25, 2011
147
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 45: MPU Control (MPUCTRL), offset 0xD94
Note:
This register can only be accessed from privileged mode.
The MPUCTRL register enables the MPU, enables the default memory map background region,
and enables use of the MPU when in the hard fault, Non-maskable Interrupt (NMI), and Fault Mask
Register (FAULTMASK) escalated handlers.
When the ENABLE and PRIVDEFEN bits are both set:
■ For privileged accesses, the default memory map is as described in “Memory Model” on page 67.
Any access by privileged software that does not address an enabled memory region behaves
as defined by the default memory map.
■ Any access by unprivileged software that does not address an enabled memory region causes
a memory management fault.
Execute Never (XN) and Strongly Ordered rules always apply to the System Control Space regardless
of the value of the ENABLE bit.
When the ENABLE bit is set, at least one region of the memory map must be enabled for the system
to function unless the PRIVDEFEN bit is set. If the PRIVDEFEN bit is set and no regions are enabled,
then only privileged software can operate.
When the ENABLE bit is clear, the system uses the default memory map, which has the same
memory attributes as if the MPU is not implemented (see Table 2-5 on page 70 for more information).
The default memory map applies to accesses from both privileged and unprivileged software.
When the MPU is enabled, accesses to the System Control Space and vector table are always
permitted. Other areas are accessible based on regions and whether PRIVDEFEN is set.
Unless HFNMIENA is set, the MPU is not enabled when the processor is executing the handler for
an exception with priority –1 or –2. These priorities are only possible when handling a hard fault or
NMI exception or when FAULTMASK is enabled. Setting the HFNMIENA bit enables the MPU when
operating with these two priorities.
MPU Control (MPUCTRL)
Base 0xE000.E000
Offset 0xD94
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:3
reserved
RO
0x0000.000
PRIVDEFEN HFNMIENA
R/W
0
R/W
0
ENABLE
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
148
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
2
PRIVDEFEN
R/W
0
Description
MPU Default Region
This bit enables privileged software access to the default memory map.
Value Description
0
If the MPU is enabled, this bit disables use of the default memory
map. Any memory access to a location not covered by any
enabled region causes a fault.
1
If the MPU is enabled, this bit enables use of the default memory
map as a background region for privileged software accesses.
When this bit is set, the background region acts as if it is region number
-1. Any region that is defined and enabled has priority over this default
map.
If the MPU is disabled, the processor ignores this bit.
1
HFNMIENA
R/W
0
MPU Enabled During Faults
This bit controls the operation of the MPU during hard fault, NMI, and
FAULTMASK handlers.
Value Description
0
The MPU is disabled during hard fault, NMI, and FAULTMASK
handlers, regardless of the value of the ENABLE bit.
1
The MPU is enabled during hard fault, NMI, and FAULTMASK
handlers.
When the MPU is disabled and this bit is set, the resulting behavior is
unpredictable.
0
ENABLE
R/W
0
MPU Enable
Value Description
0
The MPU is disabled.
1
The MPU is enabled.
When the MPU is disabled and the HFNMIENA bit is set, the resulting
behavior is unpredictable.
July 25, 2011
149
Texas Instruments-Production Data
Cortex-M3 Peripherals
Register 46: MPU Region Number (MPUNUMBER), offset 0xD98
Note:
This register can only be accessed from privileged mode.
The MPUNUMBER register selects which memory region is referenced by the MPU Region Base
Address (MPUBASE) and MPU Region Attribute and Size (MPUATTR) registers. Normally, the
required region number should be written to this register before accessing the MPUBASE or the
MPUATTR register. However, the region number can be changed by writing to the MPUBASE
register with the VALID bit set (see page 151). This write updates the value of the REGION field.
MPU Region Number (MPUNUMBER)
Base 0xE000.E000
Offset 0xD98
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
1
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
9
8
7
6
5
4
3
2
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:3
reserved
RO
0x0000.000
2:0
NUMBER
R/W
0x0
NUMBER
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
MPU Region to Access
This field indicates the MPU region referenced by the MPUBASE and
MPUATTR registers. The MPU supports eight memory regions.
150
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 47: MPU Region Base Address (MPUBASE), offset 0xD9C
Register 48: MPU Region Base Address Alias 1 (MPUBASE1), offset 0xDA4
Register 49: MPU Region Base Address Alias 2 (MPUBASE2), offset 0xDAC
Register 50: MPU Region Base Address Alias 3 (MPUBASE3), offset 0xDB4
Note:
This register can only be accessed from privileged mode.
The MPUBASE register defines the base address of the MPU region selected by the MPU Region
Number (MPUNUMBER) register and can update the value of the MPUNUMBER register. To
change the current region number and update the MPUNUMBER register, write the MPUBASE
register with the VALID bit set.
The ADDR field is bits 31:N of the MPUBASE register. Bits (N-1):5 are reserved. The region size,
as specified by the SIZE field in the MPU Region Attribute and Size (MPUATTR) register, defines
the value of N where:
N = Log2(Region size in bytes)
If the region size is configured to 4 GB in the MPUATTR register, there is no valid ADDR field. In
this case, the region occupies the complete memory map, and the base address is 0x0000.0000.
The base address is aligned to the size of the region. For example, a 64-KB region must be aligned
on a multiple of 64 KB, for example, at 0x0001.0000 or 0x0002.0000.
MPU Region Base Address (MPUBASE)
Base 0xE000.E000
Offset 0xD9C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
VALID
reserved
WO
0
RO
0
ADDR
Type
Reset
ADDR
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
31:5
ADDR
R/W
0x0000.000
R/W
0
R/W
0
R/W
0
R/W
0
REGION
R/W
0
R/W
0
R/W
0
Description
Base Address Mask
Bits 31:N in this field contain the region base address. The value of N
depends on the region size, as shown above. The remaining bits (N-1):5
are reserved.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
151
Texas Instruments-Production Data
Cortex-M3 Peripherals
Bit/Field
Name
Type
Reset
4
VALID
WO
0
Description
Region Number Valid
Value Description
0
The MPUNUMBER register is not changed and the processor
updates the base address for the region specified in the
MPUNUMBER register and ignores the value of the REGION
field.
1
The MPUNUMBER register is updated with the value of the
REGION field and the base address is updated for the region
specified in the REGION field.
This bit is always read as 0.
3
reserved
RO
0
2:0
REGION
R/W
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Region Number
On a write, contains the value to be written to the MPUNUMBER register.
On a read, returns the current region number in the MPUNUMBER
register.
152
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 51: MPU Region Attribute and Size (MPUATTR), offset 0xDA0
Register 52: MPU Region Attribute and Size Alias 1 (MPUATTR1), offset 0xDA8
Register 53: MPU Region Attribute and Size Alias 2 (MPUATTR2), offset 0xDB0
Register 54: MPU Region Attribute and Size Alias 3 (MPUATTR3), offset 0xDB8
Note:
This register can only be accessed from privileged mode.
The MPUATTR register defines the region size and memory attributes of the MPU region specified
by the MPU Region Number (MPUNUMBER) register and enables that region and any subregions.
The MPUATTR register is accessible using word or halfword accesses with the most-significant
halfword holding the region attributes and the least-significant halfword holds the region size and
the region and subregion enable bits.
The MPU access permission attribute bits, XN, AP, TEX, S, C, and B, control access to the
corresponding memory region. If an access is made to an area of memory without the required
permissions, then the MPU generates a permission fault.
The SIZE field defines the size of the MPU memory region specified by the MPUNUMBER register
as follows:
(Region size in bytes) = 2(SIZE+1)
The smallest permitted region size is 32 bytes, corresponding to a SIZE value of 4. Table
3-9 on page 153 gives example SIZE values with the corresponding region size and value of N in
the MPU Region Base Address (MPUBASE) register.
Table 3-9. Example SIZE Field Values
a
SIZE Encoding
Region Size
Value of N
Note
00100b (0x4)
32 B
5
Minimum permitted size
01001b (0x9)
1 KB
10
-
10011b (0x13)
1 MB
20
-
11101b (0x1D)
1 GB
30
-
11111b (0x1F)
4 GB
No valid ADDR field in MPUBASE; the Maximum possible size
region occupies the complete
memory map.
a. Refers to the N parameter in the MPUBASE register (see page 151).
MPU Region Attribute and Size (MPUATTR)
Base 0xE000.E000
Offset 0xDA0
Type R/W, reset 0x0000.0000
31
30
29
28
27
reserved
Type
Reset
26
25
24
23
AP
21
reserved
20
19
18
TEX
17
16
XN
reserved
S
C
B
RO
0
RO
0
RO
0
R/W
0
RO
0
R/W
0
R/W
0
R/W
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
SRD
Type
Reset
22
reserved
SIZE
July 25, 2011
R/W
0
ENABLE
R/W
0
153
Texas Instruments-Production Data
Cortex-M3 Peripherals
Bit/Field
Name
Type
Reset
Description
31:29
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
28
XN
R/W
0
Instruction Access Disable
Value Description
0
Instruction fetches are enabled.
1
Instruction fetches are disabled.
27
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
26:24
AP
R/W
0
Access Privilege
For information on using this bit field, see Table 3-5 on page 97.
23:22
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
21:19
TEX
R/W
0x0
Type Extension Mask
For information on using this bit field, see Table 3-3 on page 96.
18
S
R/W
0
Shareable
For information on using this bit, see Table 3-3 on page 96.
17
C
R/W
0
Cacheable
For information on using this bit, see Table 3-3 on page 96.
16
B
R/W
0
Bufferable
For information on using this bit, see Table 3-3 on page 96.
15:8
SRD
R/W
0x00
Subregion Disable Bits
Value Description
0
The corresponding subregion is enabled.
1
The corresponding subregion is disabled.
Region sizes of 128 bytes and less do not support subregions. When
writing the attributes for such a region, configure the SRD field as 0x00.
See the section called “Subregions” on page 95 for more information.
7:6
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
5:1
SIZE
R/W
0x0
Region Size Mask
The SIZE field defines the size of the MPU memory region specified by
the MPUNUMBER register. Refer to Table 3-9 on page 153 for more
information.
154
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
0
ENABLE
R/W
0
Description
Region Enable
Value Description
0
The region is disabled.
1
The region is enabled.
July 25, 2011
155
Texas Instruments-Production Data
JTAG Interface
4
JTAG Interface
The Joint Test Action Group (JTAG) port is an IEEE standard that defines a Test Access Port and
Boundary Scan Architecture for digital integrated circuits and provides a standardized serial interface
for controlling the associated test logic. The TAP, Instruction Register (IR), and Data Registers (DR)
can be used to test the interconnections of assembled printed circuit boards and obtain manufacturing
information on the components. The JTAG Port also provides a means of accessing and controlling
design-for-test features such as I/O pin observation and control, scan testing, and debugging.
The JTAG port is comprised of four pins: TCK, TMS, TDI, and TDO. Data is transmitted serially into
the controller on TDI and out of the controller on TDO. The interpretation of this data is dependent
on the current state of the TAP controller. For detailed information on the operation of the JTAG
port and TAP controller, please refer to the IEEE Standard 1149.1-Test Access Port and
Boundary-Scan Architecture.
®
The Stellaris JTAG controller works with the ARM JTAG controller built into the Cortex-M3 core
by multiplexing the TDO outputs from both JTAG controllers. ARM JTAG instructions select the ARM
TDO output while Stellaris JTAG instructions select the Stellaris TDO output. The multiplexer is
controlled by the Stellaris JTAG controller, which has comprehensive programming for the ARM,
Stellaris, and unimplemented JTAG instructions.
The Stellaris JTAG module has the following features:
■ IEEE 1149.1-1990 compatible Test Access Port (TAP) controller
■ Four-bit Instruction Register (IR) chain for storing JTAG instructions
■ IEEE standard instructions: BYPASS, IDCODE, SAMPLE/PRELOAD, EXTEST and INTEST
■ ARM additional instructions: APACC, DPACC and ABORT
■ Integrated ARM Serial Wire Debug (SWD)
– Serial Wire JTAG Debug Port (SWJ-DP)
– Flash Patch and Breakpoint (FPB) unit for implementing breakpoints
– Data Watchpoint and Trace (DWT) unit for implementing watchpoints, trigger resources, and
system profiling
– Instrumentation Trace Macrocell (ITM) for support of printf style debugging
– Trace Port Interface Unit (TPIU) for bridging to a Trace Port Analyzer
See the ARM® Debug Interface V5 Architecture Specification for more information on the ARM
JTAG controller.
156
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
4.1
Block Diagram
Figure 4-1. JTAG Module Block Diagram
TCK
TMS
TAP Controller
TDI
Instruction Register (IR)
BYPASS Data Register
TDO
Boundary Scan Data Register
IDCODE Data Register
ABORT Data Register
DPACC Data Register
APACC Data Register
Cortex-M3
Debug
Port
4.2
Signal Description
The following table lists the external signals of the JTAG/SWD controller and describes the function
of each. The JTAG/SWD controller signals are alternate functions for some GPIO signals, however
note that the reset state of the pins is for the JTAG/SWD function. The JTAG/SWD controller signals
are under commit protection and require a special process to be configured as GPIOs, see “Commit
Control” on page 403. The column in the table below titled "Pin Mux/Pin Assignment" lists the GPIO
pin placement for the JTAG/SWD controller signals. The AFSEL bit in the GPIO Alternate Function
Select (GPIOAFSEL) register (page 418) is set to choose the JTAG/SWD function. The number in
parentheses is the encoding that must be programmed into the PMCn field in the GPIO Port Control
(GPIOPCTL) register (page 435) to assign the JTAG/SWD controller signals to the specified GPIO
port pin. For more information on configuring GPIOs, see “General-Purpose Input/Outputs
(GPIOs)” on page 395.
Table 4-1. Signals for JTAG_SWD_SWO (100LQFP)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
SWCLK
80
PC0 (3)
I
TTL
JTAG/SWD CLK.
SWDIO
79
PC1 (3)
I/O
TTL
JTAG TMS and SWDIO.
SWO
77
PC3 (3)
O
TTL
JTAG TDO and SWO.
TCK
80
PC0 (3)
I
TTL
JTAG/SWD CLK.
TDI
78
PC2 (3)
I
TTL
JTAG TDI.
TDO
77
PC3 (3)
O
TTL
JTAG TDO and SWO.
July 25, 2011
157
Texas Instruments-Production Data
JTAG Interface
Table 4-1. Signals for JTAG_SWD_SWO (100LQFP) (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
79
TMS
PC1 (3)
a
Pin Type
Buffer Type
I
TTL
Description
JTAG TMS and SWDIO.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 4-2. Signals for JTAG_SWD_SWO (108BGA)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
A9
PC0 (3)
I
TTL
JTAG/SWD CLK.
SWDIO
B9
PC1 (3)
I/O
TTL
JTAG TMS and SWDIO.
SWO
A10
PC3 (3)
O
TTL
JTAG TDO and SWO.
TCK
A9
PC0 (3)
I
TTL
JTAG/SWD CLK.
SWCLK
TDI
B8
PC2 (3)
I
TTL
JTAG TDI.
TDO
A10
PC3 (3)
O
TTL
JTAG TDO and SWO.
TMS
B9
PC1 (3)
I
TTL
JTAG TMS and SWDIO.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
4.3
Functional Description
A high-level conceptual drawing of the JTAG module is shown in Figure 4-1 on page 157. The JTAG
module is composed of the Test Access Port (TAP) controller and serial shift chains with parallel
update registers. The TAP controller is a simple state machine controlled by the TCK and TMS inputs.
The current state of the TAP controller depends on the sequence of values captured on TMS at the
rising edge of TCK. The TAP controller determines when the serial shift chains capture new data,
shift data from TDI towards TDO, and update the parallel load registers. The current state of the
TAP controller also determines whether the Instruction Register (IR) chain or one of the Data Register
(DR) chains is being accessed.
The serial shift chains with parallel load registers are comprised of a single Instruction Register (IR)
chain and multiple Data Register (DR) chains. The current instruction loaded in the parallel load
register determines which DR chain is captured, shifted, or updated during the sequencing of the
TAP controller.
Some instructions, like EXTEST and INTEST, operate on data currently in a DR chain and do not
capture, shift, or update any of the chains. Instructions that are not implemented decode to the
BYPASS instruction to ensure that the serial path between TDI and TDO is always connected (see
Table 4-4 on page 164 for a list of implemented instructions).
See “JTAG and Boundary Scan” on page 786 for JTAG timing diagrams.
Note:
4.3.1
Of all the possible reset sources, only Power-On reset (POR) and the assertion of the RST
input have any effect on the JTAG module. The pin configurations are reset by both the
RST input and POR, whereas the internal JTAG logic is only reset with POR. See “Reset
Sources” on page 169 for more information on reset.
JTAG Interface Pins
The JTAG interface consists of four standard pins: TCK, TMS, TDI, and TDO. These pins and their
associated state after a power-on reset or reset caused by the RST input are given in Table 4-3.
Detailed information on each pin follows. Refer to “General-Purpose Input/Outputs
(GPIOs)” on page 395 for information on how to reprogram the configuration of these pins.
158
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 4-3. JTAG Port Pins State after Power-On Reset or RST assertion
4.3.1.1
Pin Name
Data Direction
Internal Pull-Up
Internal Pull-Down
Drive Strength
Drive Value
TCK
Input
Enabled
Disabled
N/A
N/A
TMS
Input
Enabled
Disabled
N/A
N/A
TDI
Input
Enabled
Disabled
N/A
N/A
TDO
Output
Enabled
Disabled
2-mA driver
High-Z
Test Clock Input (TCK)
The TCK pin is the clock for the JTAG module. This clock is provided so the test logic can operate
independently of any other system clocks and to ensure that multiple JTAG TAP controllers that
are daisy-chained together can synchronously communicate serial test data between components.
During normal operation, TCK is driven by a free-running clock with a nominal 50% duty cycle. When
necessary, TCK can be stopped at 0 or 1 for extended periods of time. While TCK is stopped at 0
or 1, the state of the TAP controller does not change and data in the JTAG Instruction and Data
Registers is not lost.
By default, the internal pull-up resistor on the TCK pin is enabled after reset, assuring that no clocking
occurs if the pin is not driven from an external source. The internal pull-up and pull-down resistors
can be turned off to save internal power as long as the TCK pin is constantly being driven by an
external source (see page 424 and page 426).
4.3.1.2
Test Mode Select (TMS)
The TMS pin selects the next state of the JTAG TAP controller. TMS is sampled on the rising edge
of TCK. Depending on the current TAP state and the sampled value of TMS, the next state may be
entered. Because the TMS pin is sampled on the rising edge of TCK, the IEEE Standard 1149.1
expects the value on TMS to change on the falling edge of TCK.
Holding TMS high for five consecutive TCK cycles drives the TAP controller state machine to the
Test-Logic-Reset state. When the TAP controller enters the Test-Logic-Reset state, the JTAG
module and associated registers are reset to their default values. This procedure should be performed
to initialize the JTAG controller. The JTAG Test Access Port state machine can be seen in its entirety
in Figure 4-2 on page 160.
By default, the internal pull-up resistor on the TMS pin is enabled after reset. Changes to the pull-up
resistor settings on GPIO Port C should ensure that the internal pull-up resistor remains enabled
on PC1/TMS; otherwise JTAG communication could be lost (see page 424).
4.3.1.3
Test Data Input (TDI)
The TDI pin provides a stream of serial information to the IR chain and the DR chains. TDI is
sampled on the rising edge of TCK and, depending on the current TAP state and the current
instruction, may present this data to the proper shift register chain. Because the TDI pin is sampled
on the rising edge of TCK, the IEEE Standard 1149.1 expects the value on TDI to change on the
falling edge of TCK.
By default, the internal pull-up resistor on the TDI pin is enabled after reset. Changes to the pull-up
resistor settings on GPIO Port C should ensure that the internal pull-up resistor remains enabled
on PC2/TDI; otherwise JTAG communication could be lost (see page 424).
4.3.1.4
Test Data Output (TDO)
The TDO pin provides an output stream of serial information from the IR chain or the DR chains.
The value of TDO depends on the current TAP state, the current instruction, and the data in the
July 25, 2011
159
Texas Instruments-Production Data
JTAG Interface
chain being accessed. In order to save power when the JTAG port is not being used, the TDO pin
is placed in an inactive drive state when not actively shifting out data. Because TDO can be connected
to the TDI of another controller in a daisy-chain configuration, the IEEE Standard 1149.1 expects
the value on TDO to change on the falling edge of TCK.
By default, the internal pull-up resistor on the TDO pin is enabled after reset, assuring that the pin
remains at a constant logic level when the JTAG port is not being used. The internal pull-up and
pull-down resistors can be turned off to save internal power if a High-Z output value is acceptable
during certain TAP controller states (see page 424 and page 426).
4.3.2
JTAG TAP Controller
The JTAG TAP controller state machine is shown in Figure 4-2. The TAP controller state machine
is reset to the Test-Logic-Reset state on the assertion of a Power-On-Reset (POR). In order to reset
the JTAG module after the microcontroller has been powered on, the TMS input must be held HIGH
for five TCK clock cycles, resetting the TAP controller and all associated JTAG chains. Asserting
the correct sequence on the TMS pin allows the JTAG module to shift in new instructions, shift in
data, or idle during extended testing sequences. For detailed information on the function of the TAP
controller and the operations that occur in each state, please refer to IEEE Standard 1149.1.
Figure 4-2. Test Access Port State Machine
Test Logic Reset
1
0
Run Test Idle
0
Select DR Scan
1
Select IR Scan
1
0
1
Capture DR
1
Capture IR
0
0
Shift DR
Shift IR
0
1
Exit 1 DR
Exit 1 IR
1
Pause IR
0
1
Exit 2 DR
0
1
0
Exit 2 IR
1
1
Update DR
4.3.3
1
0
Pause DR
1
0
1
0
0
1
0
0
Update IR
1
0
Shift Registers
The Shift Registers consist of a serial shift register chain and a parallel load register. The serial shift
register chain samples specific information during the TAP controller’s CAPTURE states and allows
160
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
this information to be shifted out on TDO during the TAP controller’s SHIFT states. While the sampled
data is being shifted out of the chain on TDO, new data is being shifted into the serial shift register
on TDI. This new data is stored in the parallel load register during the TAP controller’s UPDATE
states. Each of the shift registers is discussed in detail in “Register Descriptions” on page 164.
4.3.4
Operational Considerations
Certain operational parameters must be considered when using the JTAG module. Because the
JTAG pins can be programmed to be GPIOs, board configuration and reset conditions on these
pins must be considered. In addition, because the JTAG module has integrated ARM Serial Wire
Debug, the method for switching between these two operational modes is described below.
4.3.4.1
GPIO Functionality
When the microcontroller is reset with either a POR or RST, the JTAG/SWD port pins default to their
JTAG/SWD configurations. The default configuration includes enabling digital functionality (DEN[3:0]
set in the Port C GPIO Digital Enable (GPIODEN) register), enabling the pull-up resistors (PUE[3:0]
set in the Port C GPIO Pull-Up Select (GPIOPUR) register), disabling the pull-down resistors
(PDE[3:0] cleared in the Port C GPIO Pull-Down Select (GPIOPDR) register) and enabling the
alternate hardware function (AFSEL[3:0] set in the Port C GPIO Alternate Function Select
(GPIOAFSEL) register) on the JTAG/SWD pins. See page 418, page 424, page 426, and page 429.
It is possible for software to configure these pins as GPIOs after reset by clearing AFSEL[3:0] in
the Port C GPIOAFSEL register. If the user does not require the JTAG/SWD port for debugging or
board-level testing, this provides four more GPIOs for use in the design.
Caution – It is possible to create a software sequence that prevents the debugger from connecting to
the Stellaris microcontroller. If the program code loaded into flash immediately changes the JTAG pins
to their GPIO functionality, the debugger may not have enough time to connect and halt the controller
before the JTAG pin functionality switches. As a result, the debugger may be locked out of the part.
This issue can be avoided with a software routine that restores JTAG functionality based on an external
or software trigger.
The GPIO commit control registers provide a layer of protection against accidental programming of
critical hardware peripherals. Protection is provided for the NMI pin (PB7) and the four JTAG/SWD
pins (PC[3:0]). Writes to protected bits of the GPIO Alternate Function Select (GPIOAFSEL)
register (see page 418), GPIO Pull Up Select (GPIOPUR) register (see page 424), GPIO Pull-Down
Select (GPIOPDR) register (see page 426), and GPIO Digital Enable (GPIODEN) register (see
page 429) are not committed to storage unless the GPIO Lock (GPIOLOCK) register (see page 431)
has been unlocked and the appropriate bits of the GPIO Commit (GPIOCR) register (see page 432)
have been set.
4.3.4.2
Communication with JTAG/SWD
Because the debug clock and the system clock can be running at different frequencies, care must
be taken to maintain reliable communication with the JTAG/SWD interface. In the Capture-DR state,
the result of the previous transaction, if any, is returned, together with a 3-bit ACK response. Software
should check the ACK response to see if the previous operation has completed before initiating a
new transaction. Alternatively, if the system clock is at least 8 times faster than the debug clock
(TCK or SWCLK), the previous operation has enough time to complete and the ACK bits do not have
to be checked.
July 25, 2011
161
Texas Instruments-Production Data
JTAG Interface
4.3.4.3
Recovering a "Locked" Microcontroller
Note:
Performing the sequence below restores the nonvolatile registers discussed in “Nonvolatile
Register Programming” on page 297 to their factory default values. The mass erase of the
Flash memory caused by the sequence below occurs prior to the nonvolatile registers being
restored.
If software configures any of the JTAG/SWD pins as GPIO and loses the ability to communicate
with the debugger, there is a debug port unlock sequence that can be used to recover the
microcontroller. Performing a total of ten JTAG-to-SWD and SWD-to-JTAG switch sequences while
holding the microcontroller in reset mass erases the Flash memory. The debug port unlock sequence
is:
1. Assert and hold the RST signal.
2. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence on the section called “JTAG-to-SWD
Switching” on page 163.
3. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence on the section called “SWD-to-JTAG
Switching” on page 163.
4. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence.
5. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence.
6. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence.
7. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence.
8. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence.
9. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence.
10. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence.
11. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence.
12. Release the RST signal.
13. Wait 400 ms.
14. Power-cycle the microcontroller.
4.3.4.4
ARM Serial Wire Debug (SWD)
In order to seamlessly integrate the ARM Serial Wire Debug (SWD) functionality, a serial-wire
debugger must be able to connect to the Cortex-M3 core without having to perform, or have any
knowledge of, JTAG cycles. This integration is accomplished with a SWD preamble that is issued
before the SWD session begins.
The switching preamble used to enable the SWD interface of the SWJ-DP module starts with the
TAP controller in the Test-Logic-Reset state. From here, the preamble sequences the TAP controller
through the following states: Run Test Idle, Select DR, Select IR, Test Logic Reset, Test Logic
Reset, Run Test Idle, Run Test Idle, Select DR, Select IR, Test Logic Reset, Test Logic Reset, Run
Test Idle, Run Test Idle, Select DR, Select IR, and Test Logic Reset states.
162
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Stepping through this sequence of the TAP state machine enables the SWD interface and disables
the JTAG interface. For more information on this operation and the SWD interface, see the ARM®
Debug Interface V5 Architecture Specification.
Because this sequence is a valid series of JTAG operations that could be issued, the ARM JTAG
TAP controller is not fully compliant to the IEEE Standard 1149.1. This instance is the only one
where the ARM JTAG TAP controller does not meet full compliance with the specification. Due to
the low probability of this sequence occurring during normal operation of the TAP controller, it should
not affect normal performance of the JTAG interface.
JTAG-to-SWD Switching
To switch the operating mode of the Debug Access Port (DAP) from JTAG to SWD mode, the
external debug hardware must send the switching preamble to the microcontroller. The 16-bit TMS
command for switching to SWD mode is defined as b1110.0111.1001.1110, transmitted LSB first.
This command can also be represented as 0xE79E when transmitted LSB first. The complete switch
sequence should consist of the following transactions on the TCK/SWCLK and TMS/SWDIO signals:
1. Send at least 50 TCK/SWCLK cycles with TMS/SWDIO High to ensure that both JTAG and SWD
are in their reset/idle states.
2. Send the 16-bit JTAG-to-SWD switch command, 0xE79E, on TMS.
3. Send at least 50 TCK/SWCLK cycles with TMS/SWDIO High to ensure that if SWJ-DP was already
in SWD mode, the SWD goes into the line reset state before sending the switch sequence.
SWD-to-JTAG Switching
To switch the operating mode of the Debug Access Port (DAP) from SWD to JTAG mode, the
external debug hardware must send a switch command to the microcontroller. The 16-bit TMS
command for switching to JTAG mode is defined as b1110.0111.0011.1100, transmitted LSB first.
This command can also be represented as 0xE73C when transmitted LSB first. The complete switch
sequence should consist of the following transactions on the TCK/SWCLK and TMS/SWDIO signals:
1. Send at least 50 TCK/SWCLK cycles with TMS/SWDIO High to ensure that both JTAG and SWD
are in their reset/idle states.
2. Send the 16-bit SWD-to-JTAG switch command, 0xE73C, on TMS.
3. Send at least 50 TCK/SWCLK cycles with TMS/SWDIO High to ensure that if SWJ-DP was already
in JTAG mode, the JTAG goes into the Test Logic Reset state before sending the switch
sequence.
4.4
Initialization and Configuration
After a Power-On-Reset or an external reset (RST), the JTAG pins are automatically configured for
JTAG communication. No user-defined initialization or configuration is needed. However, if the user
application changes these pins to their GPIO function, they must be configured back to their JTAG
functionality before JTAG communication can be restored. To return the pins to their JTAG functions,
enable the four JTAG pins (PC[3:0]) for their alternate function using the GPIOAFSEL register.
In addition to enabling the alternate functions, any other changes to the GPIO pad configurations
on the four JTAG pins (PC[3:0]) should be returned to their default settings.
July 25, 2011
163
Texas Instruments-Production Data
JTAG Interface
4.5
Register Descriptions
The registers in the JTAG TAP Controller or Shift Register chains are not memory mapped and are
not accessible through the on-chip Advanced Peripheral Bus (APB). Instead, the registers within
the JTAG controller are all accessed serially through the TAP Controller. These registers include
the Instruction Register and the six Data Registers.
4.5.1
Instruction Register (IR)
The JTAG TAP Instruction Register (IR) is a four-bit serial scan chain connected between the JTAG
TDI and TDO pins with a parallel load register. When the TAP Controller is placed in the correct
states, bits can be shifted into the IR. Once these bits have been shifted into the chain and updated,
they are interpreted as the current instruction. The decode of the IR bits is shown in Table 4-4. A
detailed explanation of each instruction, along with its associated Data Register, follows.
Table 4-4. JTAG Instruction Register Commands
4.5.1.1
IR[3:0]
Instruction
Description
0x0
EXTEST
Drives the values preloaded into the Boundary Scan Chain by the
SAMPLE/PRELOAD instruction onto the pads.
0x1
INTEST
Drives the values preloaded into the Boundary Scan Chain by the
SAMPLE/PRELOAD instruction into the controller.
0x2
SAMPLE / PRELOAD
0x8
ABORT
Shifts data into the ARM Debug Port Abort Register.
0xA
DPACC
Shifts data into and out of the ARM DP Access Register.
0xB
APACC
Shifts data into and out of the ARM AC Access Register.
0xE
IDCODE
Loads manufacturing information defined by the IEEE Standard 1149.1 into
the IDCODE chain and shifts it out.
0xF
BYPASS
Connects TDI to TDO through a single Shift Register chain.
All Others
Reserved
Defaults to the BYPASS instruction to ensure that TDI is always connected
to TDO.
Captures the current I/O values and shifts the sampled values out of the
Boundary Scan Chain while new preload data is shifted in.
EXTEST Instruction
The EXTEST instruction is not associated with its own Data Register chain. Instead, the EXTEST
instruction uses the data that has been preloaded into the Boundary Scan Data Register using the
SAMPLE/PRELOAD instruction. When the EXTEST instruction is present in the Instruction Register,
the preloaded data in the Boundary Scan Data Register associated with the outputs and output
enables are used to drive the GPIO pads rather than the signals coming from the core. With tests
that drive known values out of the controller, this instruction can be used to verify connectivity. While
the EXTEST instruction is present in the Instruction Register, the Boundary Scan Data Register can
be accessed to sample and shift out the current data and load new data into the Boundary Scan
Data Register.
4.5.1.2
INTEST Instruction
The INTEST instruction is not associated with its own Data Register chain. Instead, the INTEST
instruction uses the data that has been preloaded into the Boundary Scan Data Register using the
SAMPLE/PRELOAD instruction. When the INTEST instruction is present in the Instruction Register,
the preloaded data in the Boundary Scan Data Register associated with the inputs are used to drive
the signals going into the core rather than the signals coming from the GPIO pads. With tests that
drive known values into the controller, this instruction can be used for testing. It is important to note
that although the RST input pin is on the Boundary Scan Data Register chain, it is only observable.
164
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
While the INTEST instruction is present in the Instruction Register, the Boundary Scan Data Register
can be accessed to sample and shift out the current data and load new data into the Boundary Scan
Data Register.
4.5.1.3
SAMPLE/PRELOAD Instruction
The SAMPLE/PRELOAD instruction connects the Boundary Scan Data Register chain between
TDI and TDO. This instruction samples the current state of the pad pins for observation and preloads
new test data. Each GPIO pad has an associated input, output, and output enable signal. When the
TAP controller enters the Capture DR state during this instruction, the input, output, and output-enable
signals to each of the GPIO pads are captured. These samples are serially shifted out on TDO while
the TAP controller is in the Shift DR state and can be used for observation or comparison in various
tests.
While these samples of the inputs, outputs, and output enables are being shifted out of the Boundary
Scan Data Register, new data is being shifted into the Boundary Scan Data Register from TDI.
Once the new data has been shifted into the Boundary Scan Data Register, the data is saved in the
parallel load registers when the TAP controller enters the Update DR state. This update of the
parallel load register preloads data into the Boundary Scan Data Register that is associated with
each input, output, and output enable. This preloaded data can be used with the EXTEST and
INTEST instructions to drive data into or out of the controller. See “Boundary Scan Data
Register” on page 166 for more information.
4.5.1.4
ABORT Instruction
The ABORT instruction connects the associated ABORT Data Register chain between TDI and
TDO. This instruction provides read and write access to the ABORT Register of the ARM Debug
Access Port (DAP). Shifting the proper data into this Data Register clears various error bits or initiates
a DAP abort of a previous request. See the “ABORT Data Register” on page 167 for more information.
4.5.1.5
DPACC Instruction
The DPACC instruction connects the associated DPACC Data Register chain between TDI and
TDO. This instruction provides read and write access to the DPACC Register of the ARM Debug
Access Port (DAP). Shifting the proper data into this register and reading the data output from this
register allows read and write access to the ARM debug and status registers. See “DPACC Data
Register” on page 167 for more information.
4.5.1.6
APACC Instruction
The APACC instruction connects the associated APACC Data Register chain between TDI and
TDO. This instruction provides read and write access to the APACC Register of the ARM Debug
Access Port (DAP). Shifting the proper data into this register and reading the data output from this
register allows read and write access to internal components and buses through the Debug Port.
See “APACC Data Register” on page 167 for more information.
4.5.1.7
IDCODE Instruction
The IDCODE instruction connects the associated IDCODE Data Register chain between TDI and
TDO. This instruction provides information on the manufacturer, part number, and version of the
ARM core. This information can be used by testing equipment and debuggers to automatically
configure input and output data streams. IDCODE is the default instruction loaded into the JTAG
Instruction Register when a Power-On-Reset (POR) is asserted, or the Test-Logic-Reset state is
entered. See “IDCODE Data Register” on page 166 for more information.
July 25, 2011
165
Texas Instruments-Production Data
JTAG Interface
4.5.1.8
BYPASS Instruction
The BYPASS instruction connects the associated BYPASS Data Register chain between TDI and
TDO. This instruction is used to create a minimum length serial path between the TDI and TDO ports.
The BYPASS Data Register is a single-bit shift register. This instruction improves test efficiency by
allowing components that are not needed for a specific test to be bypassed in the JTAG scan chain
by loading them with the BYPASS instruction. See “BYPASS Data Register” on page 166 for more
information.
4.5.2
Data Registers
The JTAG module contains six Data Registers. These serial Data Register chains include: IDCODE,
BYPASS, Boundary Scan, APACC, DPACC, and ABORT and are discussed in the following sections.
4.5.2.1
IDCODE Data Register
The format for the 32-bit IDCODE Data Register defined by the IEEE Standard 1149.1 is shown in
Figure 4-3. The standard requires that every JTAG-compliant microcontroller implement either the
IDCODE instruction or the BYPASS instruction as the default instruction. The LSB of the IDCODE
Data Register is defined to be a 1 to distinguish it from the BYPASS instruction, which has an LSB
of 0. This definition allows auto-configuration test tools to determine which instruction is the default
instruction.
The major uses of the JTAG port are for manufacturer testing of component assembly and program
development and debug. To facilitate the use of auto-configuration debug tools, the IDCODE
instruction outputs a value of 0x4BA0.0477. This value allows the debuggers to automatically
configure themselves to work correctly with the Cortex-M3 during debug.
Figure 4-3. IDCODE Register Format
31
TDI
4.5.2.2
28 27
12 11
Version
Part Number
1 0
Manufacturer ID
1
TDO
BYPASS Data Register
The format for the 1-bit BYPASS Data Register defined by the IEEE Standard 1149.1 is shown in
Figure 4-4. The standard requires that every JTAG-compliant microcontroller implement either the
BYPASS instruction or the IDCODE instruction as the default instruction. The LSB of the BYPASS
Data Register is defined to be a 0 to distinguish it from the IDCODE instruction, which has an LSB
of 1. This definition allows auto-configuration test tools to determine which instruction is the default
instruction.
Figure 4-4. BYPASS Register Format
0
TDI
4.5.2.3
0
TDO
Boundary Scan Data Register
The format of the Boundary Scan Data Register is shown in Figure 4-5. Each GPIO pin, starting
with a GPIO pin next to the JTAG port pins, is included in the Boundary Scan Data Register. Each
166
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
GPIO pin has three associated digital signals that are included in the chain. These signals are input,
output, and output enable, and are arranged in that order as shown in the figure.
When the Boundary Scan Data Register is accessed with the SAMPLE/PRELOAD instruction, the
input, output, and output enable from each digital pad are sampled and then shifted out of the chain
to be verified. The sampling of these values occurs on the rising edge of TCK in the Capture DR
state of the TAP controller. While the sampled data is being shifted out of the Boundary Scan chain
in the Shift DR state of the TAP controller, new data can be preloaded into the chain for use with
the EXTEST and INTEST instructions. The EXTEST instruction forces data out of the controller,
and the INTEST instruction forces data into the controller.
Figure 4-5. Boundary Scan Register Format
TDI
I
N
O
U
T
O
E
...
1st GPIO
4.5.2.4
I
N
O
U
T
mth GPIO
O
E
I
N
O
U
T
(m+1)th GPIO
O
E
...
I
N
O
U
T
O
E
TDO
GPIO nth
APACC Data Register
The format for the 35-bit APACC Data Register defined by ARM is described in the ARM® Debug
Interface V5 Architecture Specification.
4.5.2.5
DPACC Data Register
The format for the 35-bit DPACC Data Register defined by ARM is described in the ARM® Debug
Interface V5 Architecture Specification.
4.5.2.6
ABORT Data Register
The format for the 35-bit ABORT Data Register defined by ARM is described in the ARM® Debug
Interface V5 Architecture Specification.
July 25, 2011
167
Texas Instruments-Production Data
System Control
5
System Control
System control configures the overall operation of the device and provides information about the
device. Configurable features include reset control, NMI operation, power control, clock control, and
low-power modes.
5.1
Signal Description
The following table lists the external signals of the System Control module and describes the function
of each. The NMI signal is the alternate function for the GPIO PB7 signal and functions as a GPIO
after reset. PB7 is under commit protection and requires a special process to be configured as any
alternate function or to subsequently return to the GPIO function, see “Commit Control” on page 403.
The column in the table below titled "Pin Mux/Pin Assignment" lists the GPIO pin placement for the
NMI signal. The AFSEL bit in the GPIO Alternate Function Select (GPIOAFSEL) register (page 418)
should be set to choose the NMI function. The number in parentheses is the encoding that must be
programmed into the PMCn field in the GPIO Port Control (GPIOPCTL) register (page 435) to assign
the NMI signal to the specified GPIO port pin. For more information on configuring GPIOs, see
“General-Purpose Input/Outputs (GPIOs)” on page 395. The remaining signals (with the word "fixed"
in the Pin Mux/Pin Assignment column) have a fixed pin assignment and function.
Table 5-1. Signals for System Control & Clocks (100LQFP)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
CMOD0
65
fixed
I
TTL
CPU Mode bit 0. Input must be set to logic 0
(grounded); other encodings reserved.
CMOD1
76
fixed
I
TTL
CPU Mode bit 1. Input must be set to logic 0
(grounded); other encodings reserved.
NMI
89
PB7 (4)
I
TTL
Non-maskable interrupt.
OSC0
48
fixed
I
Analog
Main oscillator crystal input or an external clock
reference input.
OSC1
49
fixed
O
Analog
Main oscillator crystal output. Leave unconnected
when using a single-ended clock source.
RST
64
fixed
I
TTL
System reset input.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 5-2. Signals for System Control & Clocks (108BGA)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
CMOD0
E11
fixed
I
TTL
CPU Mode bit 0. Input must be set to logic 0
(grounded); other encodings reserved.
CMOD1
B10
fixed
I
TTL
CPU Mode bit 1. Input must be set to logic 0
(grounded); other encodings reserved.
NMI
A8
PB7 (4)
I
TTL
Non-maskable interrupt.
OSC0
L11
fixed
I
Analog
Main oscillator crystal input or an external clock
reference input.
OSC1
M11
fixed
O
Analog
Main oscillator crystal output. Leave unconnected
when using a single-ended clock source.
RST
H11
fixed
I
TTL
System reset input.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
168
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
5.2
Functional Description
The System Control module provides the following capabilities:
■ Device identification, see “Device Identification” on page 169
■ Local control, such as reset (see “Reset Control” on page 169), power (see “Power
Control” on page 175) and clock control (see “Clock Control” on page 175)
■ System control (Run, Sleep, and Deep-Sleep modes), see “System Control” on page 182
5.2.1
Device Identification
Several read-only registers provide software with information on the microcontroller, such as version,
part number, SRAM size, Flash memory size, and other features. See the DID0 (page 187), DID1
(page 214), DC0-DC9 (page 216) and NVMSTAT (page 236) registers.
5.2.2
Reset Control
This section discusses aspects of hardware functions during reset as well as system software
requirements following the reset sequence.
5.2.2.1
CMOD0 and CMOD1 Test-Mode Control Pins
Two pins, CMOD0 and CMOD1, are defined for internal use for testing the microcontroller during
manufacture. They have no end-user function and should not be used. The CMOD pins should be
connected to ground.
5.2.2.2
Reset Sources
The LM3S1G58 microcontroller has six sources of reset:
1. Power-on reset (POR) (see page 170).
2. External reset input pin (RST) assertion (see page 171).
3. Internal brown-out (BOR) detector (see page 172).
4. Software-initiated reset (with the software reset registers) (see page 173).
5. A watchdog timer reset condition violation (see page 173).
6. MOSC failure (see page 174).
Table 5-3 provides a summary of results of the various reset operations.
Table 5-3. Reset Sources
Reset Source
Core Reset?
JTAG Reset?
On-Chip Peripherals
a
Reset?
Power-On Reset
Yes
Yes
Yes
RST
Yes
Yes
Yes
Brown-Out Reset
Yes
Yes
Yes
Software System Request
Reset using the SYSRESREQ
bit in the APINT register.
Yes
Yes
Yes
July 25, 2011
169
Texas Instruments-Production Data
System Control
Table 5-3. Reset Sources (continued)
Reset Source
Core Reset?
JTAG Reset?
On-Chip Peripherals
a
Reset?
Software System Request
Reset using the VECTRESET
bit in the APINT register.
Yes
No
No
Software Peripheral Reset
No
Yes
Yes
b
Watchdog Reset
Yes
Yes
Yes
MOSC Failure Reset
Yes
Yes
Yes
a. Refer to “Register Reset” on page 272 for information on how reset affects the Hibernation module.
b. Programmable on a module-by-module basis using the Software Reset Control Registers.
After a reset, the Reset Cause (RESC) register is set with the reset cause. The bits in this register
are sticky and maintain their state across multiple reset sequences, except when an internal POR
is the cause, in which case, all the bits in the RESC register are cleared except for the POR indicator.
A bit in the RESC register can be cleared by writing a 0.
At any reset that resets the core, the user has the opportunity to direct the core to execute the ROM
Boot Loader or the application in Flash memory by using any GPIO signal as configured in the Boot
Configuration (BOOTCFG) register.
At reset, the ROM is mapped over the Flash memory so that the ROM boot sequence is always
executed. The boot sequence executed from ROM is as follows:
1. The BA bit (below) is cleared such that ROM is mapped to 0x01xx.xxxx and Flash memory is
mapped to address 0x0.
2. The BOOTCFG register is read. If the EN bit is clear, the status of the specified GPIO pin is
compared with the specified polarity. If the status matches the specified polarity, the ROM is
mapped to address 0x0000.0000 and execution continues out of the ROM Boot Loader.
3. If the status doesn't match the specified polarity, the data at address 0x0000.0004 is read, and
if the data at this address is 0xFFFF.FFFF, the ROM is mapped to address 0x0000.0000 and
execution continues out of the ROM Boot Loader.
4. If there is valid data at address 0x0000.0004, the stack pointer (SP) is loaded from Flash memory
at address 0x0000.0000 and the program counter (PC) is loaded from address 0x0000.0004.
The user application begins executing.
For example, if the BOOTCFG register is written and committed with the value of 0x0000.3C01,
then PB7 is examined at reset to determine if the ROM Boot Loader should be executed. If PB7 is
Low, the core unconditionally begins executing the ROM boot loader. If PB7 is High, then the
application in Flash memory is executed if the reset vector at location 0x0000.0004 is not
0xFFFF.FFFF. Otherwise, the ROM boot loader is executed.
5.2.2.3
Power-On Reset (POR)
The internal Power-On Reset (POR) circuit monitors the power supply voltage (VDD) and generates
a reset signal to all of the internal logic including JTAG when the power supply ramp reaches a
threshold value (VTH). The microcontroller must be operating within the specified operating parameters
when the on-chip power-on reset pulse is complete (see “Power and Brown-out” on page 788). For
applications that require the use of an external reset signal to hold the microcontroller in reset longer
than the internal POR, the RST input may be used as discussed in “External RST Pin” on page 171.
170
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
The Power-On Reset sequence is as follows:
1. The microcontroller waits for internal POR to go inactive.
2. The internal reset is released and the core loads from memory the initial stack pointer, the initial
program counter, and the first instruction designated by the program counter, and then begins
execution.
The internal POR is only active on the initial power-up of the microcontroller and when the
microcontroller wakes from hibernation. The Power-On Reset timing is shown in Figure
19-4 on page 788.
5.2.2.4
External RST Pin
Note:
It is recommended that the trace for the RST signal must be kept as short as possible. Be
sure to place any components connected to the RST signal as close to the microcontroller
as possible.
If the application only uses the internal POR circuit, the RST input must be connected to the power
supply (VDD) through an optional pull-up resistor (0 to 100K Ω) as shown in Figure 5-1 on page 171.
Figure 5-1. Basic RST Configuration
VDD
Stellaris®
RPU
RST
RPU = 0 to 100 kΩ
The external reset pin (RST) resets the microcontroller including the core and all the on-chip
peripherals except the JTAG TAP controller (see “JTAG Interface” on page 156). The external reset
sequence is as follows:
1. The external reset pin (RST) is asserted for the duration specified by TMIN and then de-asserted
(see “Reset” on page 789).
2. The internal reset is released and the core loads from memory the initial stack pointer, the initial
program counter, and the first instruction designated by the program counter, and then begins
execution.
To improve noise immunity and/or to delay reset at power up, the RST input may be connected to
an RC network as shown in Figure 5-2 on page 172.
July 25, 2011
171
Texas Instruments-Production Data
System Control
Figure 5-2. External Circuitry to Extend Power-On Reset
VDD
Stellaris®
RPU
RST
C1
RPU = 1 kΩ to 100 kΩ
C1 = 1 nF to 10 µF
If the application requires the use of an external reset switch, Figure 5-3 on page 172 shows the
proper circuitry to use.
Figure 5-3. Reset Circuit Controlled by Switch
VDD
Stellaris®
RPU
RST
C1
RS
Typical RPU = 10 kΩ
Typical RS = 470 Ω
C1 = 10 nF
The RPU and C1 components define the power-on delay.
The external reset timing is shown in Figure 19-7 on page 789.
5.2.2.5
Brown-Out Reset (BOR)
The microcontroller provides a brown-out detection circuit that triggers if the power supply (VDD)
drops below a brown-out threshold voltage (VBTH). If a brown-out condition is detected, the system
may generate an interrupt or a system reset. The default condition is to reset the microcontroller.
Brown-out resets are controlled with the Power-On and Brown-Out Reset Control (PBORCTL)
register. The BORIOR bit in the PBORCTL register must be set for a brown-out condition to trigger
a reset; if BORIOR is clear, an interrupt is generated. When a Brown-out condition occurs during a
Flash PROGRAM or ERASE operation, a full system reset is always triggered without regard to the
setting in the PBORCTL register.
The brown-out reset sequence is as follows:
1. When VDD drops below VBTH, an internal BOR condition is set.
172
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
2. If the BOR condition exists, an internal reset is asserted.
3. The internal reset is released and the microcontroller fetches and loads the initial stack pointer,
the initial program counter, the first instruction designated by the program counter, and begins
execution.
4. The internal BOR condition is reset after 500 µs to prevent another BOR condition from being
set before software has a chance to investigate the original cause.
The result of a brown-out reset is equivalent to that of an assertion of the external RST input, and
the reset is held active until the proper VDD level is restored. The RESC register can be examined
in the reset interrupt handler to determine if a Brown-Out condition was the cause of the reset, thus
allowing software to determine what actions are required to recover.
The internal Brown-Out Reset timing is shown in Figure 19-5 on page 788.
5.2.2.6
Software Reset
Software can reset a specific peripheral or generate a reset to the entire microcontroller.
Peripherals can be individually reset by software via three registers that control reset signals to each
on-chip peripheral (see the SRCRn registers, page 257). If the bit position corresponding to a
peripheral is set and subsequently cleared, the peripheral is reset. The encoding of the reset registers
is consistent with the encoding of the clock gating control for peripherals and on-chip functions (see
“System Control” on page 182).
The entire microcontroller, including the core, can be reset by software by setting the SYSRESREQ
bit in the Application Interrupt and Reset Control (APINT) register. The software-initiated system
reset sequence is as follows:
1. A software microcontroller reset is initiated by setting the SYSRESREQ bit.
2. An internal reset is asserted.
3. The internal reset is deasserted and the microcontroller loads from memory the initial stack
pointer, the initial program counter, and the first instruction designated by the program counter,
and then begins execution.
The core only can be reset by software by setting the VECTRESET bit in the APINT register. The
software-initiated core reset sequence is as follows:
1. A core reset is initiated by setting the VECTRESET bit.
2. An internal reset is asserted.
3. The internal reset is deasserted and the microcontroller loads from memory the initial stack
pointer, the initial program counter, and the first instruction designated by the program counter,
and then begins execution.
The software-initiated system reset timing is shown in Figure 19-8 on page 789.
5.2.2.7
Watchdog Timer Reset
The Watchdog Timer module's function is to prevent system hangs. The LM3S1G58 microcontroller
has two Watchdog Timer modules in case one watchdog clock source fails. One watchdog is run
off the system clock and the other is run off the Precision Internal Oscillator (PIOSC). Each module
operates in the same manner except that because the PIOSC watchdog timer module is in a different
July 25, 2011
173
Texas Instruments-Production Data
System Control
clock domain, register accesses must have a time delay between them. The watchdog timer can
be configured to generate an interrupt to the microcontroller on its first time-out and to generate a
reset on its second time-out.
After the watchdog's first time-out event, the 32-bit watchdog counter is reloaded with the value of
the Watchdog Timer Load (WDTLOAD) register and resumes counting down from that value. If
the timer counts down to zero again before the first time-out interrupt is cleared, and the reset signal
has been enabled, the watchdog timer asserts its reset signal to the microcontroller. The watchdog
timer reset sequence is as follows:
1. The watchdog timer times out for the second time without being serviced.
2. An internal reset is asserted.
3. The internal reset is released and the microcontroller loads from memory the initial stack pointer,
the initial program counter, and the first instruction designated by the program counter, and
then begins execution.
For more information on the Watchdog Timer module, see “Watchdog Timers” on page 495.
The watchdog reset timing is shown in Figure 19-9 on page 790.
5.2.3
Non-Maskable Interrupt
The microcontroller has three sources of non-maskable interrupt (NMI):
■ The assertion of the NMI signal
■ A main oscillator verification error
■ The NMISET bit in the Interrupt Control and State (INTCTRL) register in the Cortex™-M3 (see
page 121).
Software must check the cause of the interrupt in order to distinguish among the sources.
5.2.3.1
NMI Pin
The NMI signal is the alternate function for GPIO port pin PB7. The alternate function must be
enabled in the GPIO for the signal to be used as an interrupt, as described in “General-Purpose
Input/Outputs (GPIOs)” on page 395. Note that enabling the NMI alternate function requires the use
of the GPIO lock and commit function just like the GPIO port pins associated with JTAG/SWD
functionality, see page 432. The active sense of the NMI signal is High; asserting the enabled NMI
signal above VIH initiates the NMI interrupt sequence.
5.2.3.2
Main Oscillator Verification Failure
The LM3S1G58 microcontroller provides a main oscillator verification circuit that generates an error
condition if the oscillator is running too fast or too slow. If the main oscillator verification circuit is
enabled and a failure occurs, a power-on reset is generated and control is transferred to the NMI
handler. The NMI handler is used to address the main oscillator verification failure because the
necessary code can be removed from the general reset handler, speeding up reset processing. The
detection circuit is enabled by setting the CVAL bit in the Main Oscillator Control (MOSCCTL)
register. The main oscillator verification error is indicated in the main oscillator fail status (MOSCFAIL)
bit in the Reset Cause (RESC) register. The main oscillator verification circuit action is described
in more detail in “Main Oscillator Verification Circuit” on page 182.
174
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
5.2.4
Power Control
®
The Stellaris microcontroller provides an integrated LDO regulator that is used to provide power
to the majority of the microcontroller's internal logic. Figure 5-4 shows the power architecture. An
external regulator may be used instead of the on-chip LDO, but must meet the requirements in Table
19-4 on page 788. Regardless of the LDO implementation, the internal LDO requires decoupling
capacitors as specified in “On-Chip Low Drop-Out (LDO) Regulator” on page 790.
Note:
VDDA must be supplied with 3.3 V, or the microcontroller does not function properly. VDDA
is the supply for all of the analog circuitry on the device, including the clock circuitry.
Figure 5-4. Power Architecture
VDDC
Internal
Logic and PLL
VDDC
GND
GND
LDO
Low-Noise
LDO
+3.3V
VDD
GND
I/O Buffers
VDD
GND
VDDA
GNDA
Analog Circuits
VDDA
5.2.5
GNDA
Clock Control
System control determines the control of clocks in this part.
5.2.5.1
Fundamental Clock Sources
There are multiple clock sources for use in the microcontroller:
■ Precision Internal Oscillator (PIOSC). The precision internal oscillator is an on-chip clock
source that is the clock source the microcontroller uses during and following POR. It does not
require the use of any external components and provides a clock that is 16 MHz ±1% at room
temperature and ±3% across temperature. The PIOSC allows for a reduced system cost in
July 25, 2011
175
Texas Instruments-Production Data
System Control
applications that require an accurate clock source. If the main oscillator is required, software
must enable the main oscillator following reset and allow the main oscillator to stabilize before
changing the clock reference. If the Hibernation Module clock source is a 32.768-kHz oscillator,
the precision internal oscillator can be trimmed by software based on a reference clock for
increased accuracy.
■ Main Oscillator (MOSC). The main oscillator provides a frequency-accurate clock source by
one of two means: an external single-ended clock source is connected to the OSC0 input pin, or
an external crystal is connected across the OSC0 input and OSC1 output pins. If the PLL is being
used, the crystal value must be one of the supported frequencies between 3.579545 MHz to
16.384 MHz (inclusive). If the PLL is not being used, the crystal may be any one of the supported
frequencies between 1 MHz to 16.384 MHz. The single-ended clock source range is from DC
through the specified speed of the microcontroller. The supported crystals are listed in the XTAL
bit field in the RCC register (see page 198).
■ Internal 30-kHz Oscillator. The internal 30-kHz oscillator provides an operational frequency of
30 kHz ± 50%. It is intended for use during Deep-Sleep power-saving modes. This power-savings
mode benefits from reduced internal switching and also allows the MOSC to be powered down.
■ Hibernation Module Clock Source. The Hibernation module can be clocked in one of two ways.
The first way is a 4.194304-MHz crystal connected to the XOSC0 and XOSC1 pins. This clock
signal is divided by 128 internally to produce the 32.768-kHz clock reference. The second way
is a 32.768-kHz oscillator connected to the XOSC0 pin. The 32.768-kHz oscillator can be used
for the system clock, thus eliminating the need for an additional crystal or oscillator. The
Hibernation module clock source is intended to provide the system with a real-time clock source
and may also provide an accurate source of Deep-Sleep or Hibernate mode power savings.
The internal system clock (SysClk), is derived from any of the above sources plus two others: the
output of the main internal PLL and the precision internal oscillator divided by four (4 MHz ± 1%).
The frequency of the PLL clock reference must be in the range of 3.579545 MHz to 16.384 MHz
(inclusive). Table 5-4 on page 176 shows how the various clock sources can be used in a system.
Table 5-4. Clock Source Options
5.2.5.2
Clock Source
Drive PLL?
Precision Internal Oscillator
Yes
Used as SysClk?
BYPASS = 0,
OSCSRC = 0x1
Yes
BYPASS = 1, OSCSRC = 0x1
Precision Internal Oscillator divide by 4 No
(4 MHz ± 1%)
-
Yes
BYPASS = 1, OSCSRC = 0x2
Main Oscillator
Yes
BYPASS = 0,
OSCSRC = 0x0
Yes
BYPASS = 1, OSCSRC = 0x0
Internal 30-kHz Oscillator
No
-
Yes
BYPASS = 1, OSCSRC = 0x3
Hibernation Module 32.768-kHz
Oscillator
No
-
Yes
BYPASS = 1, OSCSRC2 = 0x7
Hibernation Module 4.194304-MHz
Crystal
No
-
No
-
Clock Configuration
The Run-Mode Clock Configuration (RCC) and Run-Mode Clock Configuration 2 (RCC2)
registers provide control for the system clock. The RCC2 register is provided to extend fields that
offer additional encodings over the RCC register. When used, the RCC2 register field values are
used by the logic over the corresponding field in the RCC register. In particular, RCC2 provides for
176
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
a larger assortment of clock configuration options. These registers control the following clock
functionality:
■ Source of clocks in sleep and deep-sleep modes
■ System clock derived from PLL or other clock source
■ Enabling/disabling of oscillators and PLL
■ Clock divisors
■ Crystal input selection
Important: Write the RCC register prior to writing the RCC2 register. If a subsequent write to the
RCC register is required, include another register access after writing the RCC register
and before writing the RCC2 register.
Figure 5-5 shows the logic for the main clock tree. The peripheral blocks are driven by the system
clock signal and can be individually enabled/disabled. When the PLL is enabled, the ADC clock
signal is automatically divided down to 16 MHz from the PLL output for proper ADC operation.
Note:
When the ADC module is in operation, the system clock must be at least 16 MHz.
July 25, 2011
177
Texas Instruments-Production Data
System Control
Figure 5-5. Main Clock Tree
XTALa
USBPWRDN c
USB PLL
(480 MHz)
÷4
USB Clock
RXINT
RXFRAC
I2S Receive MCLK
TXINT
TXFRAC
I2S Transmit MCLK
USEPWMDIV a
PWMDW a
PWM Clock
XTALa
PWRDN b
MOSCDIS a
PLL
(400 MHz)
Main OSC
USESYSDIV a,d
DIV400 c
÷2
IOSCDIS
a
System Clock
Precision
Internal OSC
(16 MHz)
SYSDIV e
÷4
BYPASS
b,d
Internal OSC
(30 kHz)
Hibernation
OSC
(32.768 kHz)
PWRDN
ADC Clock
OSCSRC b,d
÷ 25
a. Control provided by RCC register bit/field.
b. Control provided by RCC register bit/field or RCC2 register bit/field, if overridden with RCC2 register bit USERCC2.
c. Control provided by RCC2 register bit/field.
d. Also may be controlled by DSLPCLKCFG when in deep sleep mode.
e. Control provided by RCC register SYSDIV field, RCC2 register SYSDIV2 field if overridden with USERCC2 bit, or
[SYSDIV2,SYSDIV2LSB] if both USERCC2 and DIV400 bits are set.
Note:
The figure above shows all features available on all Stellaris® Firestorm-class microcontrollers. Not all peripherals
may be available on this device.
Using the SYSDIV and SYSDIV2 Fields
In the RCC register, the SYSDIV field specifies which divisor is used to generate the system clock
from either the PLL output or the oscillator source (depending on how the BYPASS bit in this register
178
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
is configured). When using the PLL, the VCO frequency of 400 MHz is predivided by 2 before the
divisor is applied. Table 5-5 shows how the SYSDIV encoding affects the system clock frequency,
depending on whether the PLL is used (BYPASS=0) or another clock source is used (BYPASS=1).
The divisor is equivalent to the SYSDIV encoding plus 1. For a list of possible clock sources, see
Table 5-4 on page 176.
Table 5-5. Possible System Clock Frequencies Using the SYSDIV Field
SYSDIV
0x0
Divisor
/1
a
®
Frequency (BYPASS=0) Frequency (BYPASS=1)
StellarisWare Parameter
reserved
SYSCTL_SYSDIV_1
Clock source frequency/2
b
0x1
/2
reserved
Clock source frequency/2
SYSCTL_SYSDIV_2
0x2
/3
66.67 MHz
Clock source frequency/3
SYSCTL_SYSDIV_3
0x3
/4
50 MHz
Clock source frequency/4
SYSCTL_SYSDIV_4
0x4
/5
40 MHz
Clock source frequency/5
SYSCTL_SYSDIV_5
0x5
/6
33.33 MHz
Clock source frequency/6
SYSCTL_SYSDIV_6
0x6
/7
28.57 MHz
Clock source frequency/7
SYSCTL_SYSDIV_7
0x7
/8
25 MHz
Clock source frequency/8
SYSCTL_SYSDIV_8
0x8
/9
22.22 MHz
Clock source frequency/9
SYSCTL_SYSDIV_9
0x9
/10
20 MHz
Clock source frequency/10
SYSCTL_SYSDIV_10
0xA
/11
18.18 MHz
Clock source frequency/11
SYSCTL_SYSDIV_11
0xB
/12
16.67 MHz
Clock source frequency/12
SYSCTL_SYSDIV_12
0xC
/13
15.38 MHz
Clock source frequency/13
SYSCTL_SYSDIV_13
0xD
/14
14.29 MHz
Clock source frequency/14
SYSCTL_SYSDIV_14
0xE
/15
13.33 MHz
Clock source frequency/15
SYSCTL_SYSDIV_15
0xF
/16
12.5 MHz (default)
Clock source frequency/16
SYSCTL_SYSDIV_16
a. This parameter is used in functions such as SysCtlClockSet() in the Stellaris Peripheral Driver Library.
b. SYSCTL_SYSDIV_1 does not set the USESYSDIV bit. As a result, using this parameter without enabling the PLL results
in the system clock having the same frequency as the clock source.
The SYSDIV2 field in the RCC2 register is 2 bits wider than the SYSDIV field in the RCC register
so that additional larger divisors up to /64 are possible, allowing a lower system clock frequency for
improved Deep Sleep power consumption. When using the PLL, the VCO frequency of 400 MHz is
predivided by 2 before the divisor is applied. The divisor is equivalent to the SYSDIV2 encoding
plus 1. Table 5-6 shows how the SYSDIV2 encoding affects the system clock frequency, depending
on whether the PLL is used (BYPASS2=0) or another clock source is used (BYPASS2=1). For a list
of possible clock sources, see Table 5-4 on page 176.
Table 5-6. Examples of Possible System Clock Frequencies Using the SYSDIV2 Field
SYSDIV2
Divisor
a
Frequency
(BYPASS2=0)
Frequency (BYPASS2=1)
StellarisWare Parameter
b
0x00
/1
reserved
Clock source frequency/2
SYSCTL_SYSDIV_1
0x01
/2
reserved
Clock source frequency/2
SYSCTL_SYSDIV_2
0x02
/3
66.67 MHz
Clock source frequency/3
SYSCTL_SYSDIV_3
0x03
/4
50 MHz
Clock source frequency/4
SYSCTL_SYSDIV_4
0x04
/5
40 MHz
Clock source frequency/5
SYSCTL_SYSDIV_5
...
...
...
...
...
0x09
/10
20 MHz
Clock source frequency/10
SYSCTL_SYSDIV_10
...
...
...
...
...
July 25, 2011
179
Texas Instruments-Production Data
System Control
Table 5-6. Examples of Possible System Clock Frequencies Using the SYSDIV2 Field
(continued)
Divisor
SYSDIV2
0x3F
/64
a
Frequency
(BYPASS2=0)
Frequency (BYPASS2=1)
StellarisWare Parameter
3.125 MHz
Clock source frequency/64
SYSCTL_SYSDIV_64
a. This parameter is used in functions such as SysCtlClockSet() in the Stellaris Peripheral Driver Library.
b. SYSCTL_SYSDIV_1 does not set the USESYSDIV bit. As a result, using this parameter without enabling the PLL results
in the system clock having the same frequency as the clock source.
To allow for additional frequency choices when using the PLL, the DIV400 bit is provided along
with the SYSDIV2LSB bit. When the DIV400 bit is set, bit 22 becomes the LSB for SYSDIV2. In
this situation, the divisor is equivalent to the (SYSDIV2 encoding with SYSDIV2LSB appended) plus
one. Table 5-7 shows the frequency choices when DIV400 is set. When the DIV400 bit is clear,
SYSDIV2LSB is ignored, and the system clock frequency is determined as shown in Table
5-6 on page 179.
Table 5-7. Examples of Possible System Clock Frequencies with DIV400=1
/2
reserved
-
0
/3
reserved
-
1
/4
reserved
-
0
/5
80 MHz
SYSCTL_SYSDIV_2_5
1
/6
66.67 MHz
SYSCTL_SYSDIV_3
0
/7
reserved
-
1
/8
50 MHz
SYSCTL_SYSDIV_4
0
/9
44.44 MHz
SYSCTL_SYSDIV_4_5
1
/10
40 MHz
SYSCTL_SYSDIV_5
...
...
...
...
0
/127
3.15 MHz
SYSCTL_SYSDIV_63_5
1
/128
3.125 MHz
SYSCTL_SYSDIV_64
0x00
reserved
0x01
0x02
0x03
0x04
...
0x3F
b
StellarisWare Parameter
SYSDIV2LSB
Divisor
a
Frequency (BYPASS2=0)
SYSDIV2
a. Note that DIV400 and SYSDIV2LSB are only valid when BYPASS2=0.
b. This parameter is used in functions such as SysCtlClockSet() in the Stellaris Peripheral Driver Library.
5.2.5.3
Precision Internal Oscillator Operation (PIOSC)
The microcontroller powers up with the PIOSC running. If another clock source is desired, the PIOSC
must remain enabled as it is used for internal functions. The PIOSC can only be disabled during
Deep-Sleep mode. It can be powered down by setting the IOSCDIS bit in the RCC register.
The PIOSC generates a 16-MHz clock with a ±1% accuracy at room temperatures. Across the
extended temperature range, the accuracy is ±3%. At the factory, the PIOSC is set to 16 MHz at
room temperature, however, the frequency can be trimmed for other voltage or temperature conditions
using software in one of three ways:
■ Default calibration: clear the UTEN bit and set the UPDATE bit in the Precision Internal Oscillator
Calibration (PIOSCCAL) register.
■ User-defined calibration: The user can program the UT value to adjust the PIOSC frequency. As
the UT value increases, the generated period increases. To commit a new UT value, first set the
180
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
UTEN bit, then program the UT field, and then set the UPDATE bit. The adjustment finishes within
a few clock periods and is glitch free.
■ Automatic calibration using the enable 32.768-kHz oscillator from the Hibernation module: Set
the CAL bit in the PIOSCCAL register; the results of the calibration are shown in the RESULT
field in the Precision Internal Oscillator Statistic (PIOSCSTAT) register. After calibration is
complete, the PIOSC is trimmed using the trimmed value returned in the CT field.
5.2.5.4
Crystal Configuration for the Main Oscillator (MOSC)
The main oscillator supports the use of a select number of crystals. If the main oscillator is used by
the PLL as a reference clock, the supported range of crystals is 3.579545 to 16.384 MHz, otherwise,
the range of supported crystals is 1 to 16.384 MHz.
The XTAL bit in the RCC register (see page 198) describes the available crystal choices and default
programming values.
Software configures the RCC register XTAL field with the crystal number. If the PLL is used in the
design, the XTAL field value is internally translated to the PLL settings.
5.2.5.5
Main PLL Frequency Configuration
The main PLL is disabled by default during power-on reset and is enabled later by software if
required. Software specifies the output divisor to set the system clock frequency and enables the
main PLL to drive the output. The PLL operates at 400 MHz, but is divided by two prior to the
application of the output divisor, unless the DIV400 bit in the RCC2 register is set.
To configure the PIOSC to be the clock source for the main PLL, program the OSCRC2 field in the
Run-Mode Clock Configuration 2 (RCC2) register to be 0x1.
If the main oscillator provides the clock reference to the main PLL, the translation provided by
hardware and used to program the PLL is available for software in the XTAL to PLL Translation
(PLLCFG) register (see page 202). The internal translation provides a translation within ± 1% of the
targeted PLL VCO frequency. Table 19-8 on page 791 shows the actual PLL frequency and error for
a given crystal choice.
The Crystal Value field (XTAL) in the Run-Mode Clock Configuration (RCC) register (see page 198)
describes the available crystal choices and default programming of the PLLCFG register. Any time
the XTAL field changes, the new settings are translated and the internal PLL settings are updated.
5.2.5.6
PLL Modes
■ Normal: The PLL multiplies the input clock reference and drives the output.
■ Power-Down: Most of the PLL internal circuitry is disabled and the PLL does not drive the output.
The modes are programmed using the RCC/RCC2 register fields (see page 198 and page 205).
5.2.5.7
PLL Operation
If a PLL configuration is changed, the PLL output frequency is unstable until it reconverges (relocks)
to the new setting. The time between the configuration change and relock is TREADY (see Table
19-7 on page 790). During the relock time, the affected PLL is not usable as a clock reference.
The PLL is changed by one of the following:
■ Change to the XTAL value in the RCC register—writes of the same value do not cause a relock.
July 25, 2011
181
Texas Instruments-Production Data
System Control
■ Change in the PLL from Power-Down to Normal mode.
A counter clocked by the system clock is used to measure the TREADY requirement. If the system
clock is the main oscillator and it is running off an 8.192 MHz or slower external oscillator clock, the
down counter is set to 0x1200 (that is, ~600 μs at an 8.192 MHz). If the system clock is running off
the PIOSC or an external oscillator clock that is faster than 8.192 MHz, the down counter is set to
0x2400. Hardware is provided to keep the PLL from being used as a system clock until the TREADY
condition is met after one of the two changes above. It is the user's responsibility to have a stable
clock source (like the main oscillator) before the RCC/RCC2 register is switched to use the PLL.
If the main PLL is enabled and the system clock is switched to use the PLL in one step, the system
control hardware continues to clock the microcontroller from the oscillator selected by the RCC/RCC2
register until the main PLL is stable (TREADY time met), after which it changes to the PLL. Software
can use many methods to ensure that the system is clocked from the main PLL, including periodically
polling the PLLLRIS bit in the Raw Interrupt Status (RIS) register, and enabling the PLL Lock
interrupt.
5.2.5.8
Main Oscillator Verification Circuit
The clock control includes circuitry to ensure that the main oscillator is running at the appropriate
frequency. The circuit monitors the main oscillator frequency and signals if the frequency is outside
of the allowable band of attached crystals.
The detection circuit is enabled using the CVAL bit in the Main Oscillator Control (MOSCCTL)
register. If this circuit is enabled and detects an error, the following sequence is performed by the
hardware:
1. The MOSCFAIL bit in the Reset Cause (RESC) register is set.
2. If the internal oscillator (PIOSC) is disabled, it is enabled.
3. The system clock is switched from the main oscillator to the PIOSC.
4. An internal power-on reset is initiated that lasts for 32 PIOSC periods.
5. Reset is de-asserted and the processor is directed to the NMI handler during the reset sequence.
if the MOSCIM bit in the MOSCCTL register is set, then the following sequence is performed by the
hardware:
1. The system clock is switched from the main oscillator to the PIOSC.
2. The MOFRIS bit in the RIS register is set to indicate a MOSC failure.
5.2.6
System Control
For power-savings purposes, the RCGCn, SCGCn, and DCGCn registers control the clock gating
logic for each peripheral or block in the system while the microcontroller is in Run, Sleep, and
Deep-Sleep mode, respectively. These registers are located in the System Control register map
starting at offsets 0x600, 0x700, and 0x800, respectively. There must be a delay of 3 system clocks
after a peripheral module clock is enabled in the RCGC register before any module registers are
accessed.
There are four levels of operation for the microcontroller defined as:
■ Run mode
182
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ Sleep mode
■ Deep-Sleep mode
■ Hibernation mode
The following sections describe the different modes in detail.
Caution – If the Cortex-M3 Debug Access Port (DAP) has been enabled, and the device wakes from a
low power sleep or deep-sleep mode, the core may start executing code before all clocks to peripherals
have been restored to their Run mode configuration. The DAP is usually enabled by software tools
accessing the JTAG or SWD interface when debugging or flash programming. If this condition occurs,
a Hard Fault is triggered when software accesses a peripheral with an invalid clock.
A software delay loop can be used at the beginning of the interrupt routine that is used to wake up a
system from a WFI (Wait For Interrupt) instruction. This stalls the execution of any code that accesses
a peripheral register that might cause a fault. This loop can be removed for production software as the
DAP is most likely not enabled during normal execution.
Because the DAP is disabled by default (power on reset), the user can also power cycle the device. The
DAP is not enabled unless it is enabled through the JTAG or SWD interface.
5.2.6.1
Run Mode
In Run mode, the microcontroller actively executes code. Run mode provides normal operation of
the processor and all of the peripherals that are currently enabled by the RCGCn registers. The
system clock can be any of the available clock sources including the PLL.
5.2.6.2
Sleep Mode
In Sleep mode, the clock frequency of the active peripherals is unchanged, but the processor and
the memory subsystem are not clocked and therefore no longer execute code. Sleep mode is entered
by the Cortex-M3 core executing a WFI (Wait for Interrupt) instruction. Any properly configured
interrupt event in the system brings the processor back into Run mode. See “Power
Management” on page 85 for more details.
Peripherals are clocked that are enabled in the SCGCn registers when auto-clock gating is enabled
(see the RCC register) or the RCGCn registers when the auto-clock gating is disabled. The system
clock has the same source and frequency as that during Run mode.
5.2.6.3
Deep-Sleep Mode
In Deep-Sleep mode, the clock frequency of the active peripherals may change (depending on the
Run mode clock configuration) in addition to the processor clock being stopped. An interrupt returns
the microcontroller to Run mode from one of the sleep modes; the sleep modes are entered on
request from the code. Deep-Sleep mode is entered by first setting the SLEEPDEEP bit in the System
Control (SYSCTRL) register (see page 127) and then executing a WFI instruction. Any properly
configured interrupt event in the system brings the processor back into Run mode. See “Power
Management” on page 85 for more details.
The Cortex-M3 processor core and the memory subsystem are not clocked in Deep-Sleep mode.
Peripherals are clocked that are enabled in the DCGCn registers when auto-clock gating is enabled
(see the RCC register) or the RCGCn registers when auto-clock gating is disabled. The system
clock source is specified in the DSLPCLKCFG register. When the DSLPCLKCFG register is used,
the internal oscillator source is powered up, if necessary, and other clocks are powered down. If
the PLL is running at the time of the WFI instruction, hardware powers the PLL down and overrides
July 25, 2011
183
Texas Instruments-Production Data
System Control
the SYSDIV field of the active RCC/RCC2 register, to be determined by the DSDIVORIDE setting
in the DSLPCLKCFG register, up to /16 or /64 respectively. When the Deep-Sleep exit event occurs,
hardware brings the system clock back to the source and frequency it had at the onset of Deep-Sleep
mode before enabling the clocks that had been stopped during the Deep-Sleep duration. If the
PIOSC is used as the PLL reference clock source, it may continue to provide the clock during
Deep-Sleep. See page 209.
5.2.6.4
Hibernation Mode
In this mode, the power supplies are turned off to the main part of the microcontroller and only the
Hibernation module's circuitry is active. An external wake event or RTC event is required to bring
the microcontroller back to Run mode. The Cortex-M3 processor and peripherals outside of the
Hibernation module see a normal "power on" sequence and the processor starts running code.
Software can determine if the microcontroller has been restarted from Hibernate mode by inspecting
the Hibernation module registers. For more information on the operation of Hibernation mode, see
“Hibernation Module” on page 263.
5.3
Initialization and Configuration
The PLL is configured using direct register writes to the RCC/RCC2 register. If the RCC2 register
is being used, the USERCC2 bit must be set and the appropriate RCC2 bit/field is used. The steps
required to successfully change the PLL-based system clock are:
1. Bypass the PLL and system clock divider by setting the BYPASS bit and clearing the USESYS
bit in the RCC register, thereby configuring the microcontroller to run off a “raw” clock source
and allowing for the new PLL configuration to be validated before switching the system clock
to the PLL.
2. Select the crystal value (XTAL) and oscillator source (OSCSRC), and clear the PWRDN bit in
RCC/RCC2. Setting the XTAL field automatically pulls valid PLL configuration data for the
appropriate crystal, and clearing the PWRDN bit powers and enables the PLL and its output.
3. Select the desired system divider (SYSDIV) in RCC/RCC2 and set the USESYS bit in RCC. The
SYSDIV field determines the system frequency for the microcontroller.
4. Wait for the PLL to lock by polling the PLLLRIS bit in the Raw Interrupt Status (RIS) register.
5. Enable use of the PLL by clearing the BYPASS bit in RCC/RCC2.
5.4
Register Map
Table 5-8 on page 185 lists the System Control registers, grouped by function. The offset listed is a
hexadecimal increment to the register's address, relative to the System Control base address of
0x400F.E000.
Note:
Spaces in the System Control register space that are not used are reserved for future or
internal use. Software should not modify any reserved memory address.
Additional Flash and ROM registers defined in the System Control register space are
described in the “Internal Memory” on page 290.
184
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 5-8. System Control Register Map
Description
See
page
Offset
Name
Type
Reset
0x000
DID0
RO
-
Device Identification 0
187
0x004
DID1
RO
-
Device Identification 1
214
0x008
DC0
RO
0x00FF.00BF
Device Capabilities 0
216
0x010
DC1
RO
-
Device Capabilities 1
217
0x014
DC2
RO
0x000F.5037
Device Capabilities 2
219
0x018
DC3
RO
0xBFFF.0000
Device Capabilities 3
221
0x01C
DC4
RO
0x0004.F0FF
Device Capabilities 4
223
0x020
DC5
RO
0x0000.0000
Device Capabilities 5
225
0x024
DC6
RO
0x0000.0000
Device Capabilities 6
226
0x028
DC7
RO
0xFFFF.FFFF
Device Capabilities 7
227
0x02C
DC8
RO
0xFFFF.FFFF
Device Capabilities 8 ADC Channels
231
0x030
PBORCTL
R/W
0x0000.0002
Brown-Out Reset Control
189
0x040
SRCR0
R/W
0x00000000
Software Reset Control 0
257
0x044
SRCR1
R/W
0x00000000
Software Reset Control 1
259
0x048
SRCR2
R/W
0x00000000
Software Reset Control 2
261
0x050
RIS
RO
0x0000.0000
Raw Interrupt Status
190
0x054
IMC
R/W
0x0000.0000
Interrupt Mask Control
192
0x058
MISC
R/W1C
0x0000.0000
Masked Interrupt Status and Clear
194
0x05C
RESC
R/W
-
Reset Cause
196
0x060
RCC
R/W
0x0780.3AD1
Run-Mode Clock Configuration
198
0x064
PLLCFG
RO
-
XTAL to PLL Translation
202
0x06C
GPIOHBCTL
R/W
0x0000.0000
GPIO High-Performance Bus Control
203
0x070
RCC2
R/W
0x07C0.6810
Run-Mode Clock Configuration 2
205
0x07C
MOSCCTL
R/W
0x0000.0000
Main Oscillator Control
208
0x100
RCGC0
R/W
0x00000040
Run Mode Clock Gating Control Register 0
237
0x104
RCGC1
R/W
0x00000000
Run Mode Clock Gating Control Register 1
243
0x108
RCGC2
R/W
0x00000000
Run Mode Clock Gating Control Register 2
251
0x110
SCGC0
R/W
0x00000040
Sleep Mode Clock Gating Control Register 0
239
0x114
SCGC1
R/W
0x00000000
Sleep Mode Clock Gating Control Register 1
245
0x118
SCGC2
R/W
0x00000000
Sleep Mode Clock Gating Control Register 2
253
0x120
DCGC0
R/W
0x00000040
Deep Sleep Mode Clock Gating Control Register 0
241
0x124
DCGC1
R/W
0x00000000
Deep-Sleep Mode Clock Gating Control Register 1
248
July 25, 2011
185
Texas Instruments-Production Data
System Control
Table 5-8. System Control Register Map (continued)
Name
Type
Reset
0x128
DCGC2
R/W
0x00000000
Deep Sleep Mode Clock Gating Control Register 2
255
0x144
DSLPCLKCFG
R/W
0x0780.0000
Deep Sleep Clock Configuration
209
0x150
PIOSCCAL
R/W
0x0000.0000
Precision Internal Oscillator Calibration
211
0x154
PIOSCSTAT
RO
0x0000.0040
Precision Internal Oscillator Statistics
213
0x190
DC9
RO
0x00FF.00FF
Device Capabilities 9 ADC Digital Comparators
234
0x1A0
NVMSTAT
RO
0x0000.0001
Non-Volatile Memory Information
236
5.5
Description
See
page
Offset
Register Descriptions
All addresses given are relative to the System Control base address of 0x400F.E000.
186
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 1: Device Identification 0 (DID0), offset 0x000
This register identifies the version of the microcontroller. Each microcontroller is uniquely identified
by the combined values of the CLASS field in the DID0 register and the PARTNO field in the DID1
register.
Device Identification 0 (DID0)
Base 0x400F.E000
Offset 0x000
Type RO, reset 31
30
28
27
26
VER
reserved
Type
Reset
29
25
24
23
22
21
20
reserved
18
17
16
CLASS
RO
0
RO
0
RO
0
RO
1
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
MAJOR
Type
Reset
19
MINOR
Bit/Field
Name
Type
Reset
31
reserved
RO
0
30:28
VER
RO
0x1
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
DID0 Version
This field defines the DID0 register format version. The version number
is numeric. The value of the VER field is encoded as follows (all other
encodings are reserved):
Value Description
0x1
Second version of the DID0 register format.
27:24
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
23:16
CLASS
RO
0x06
Device Class
The CLASS field value identifies the internal design from which all mask
sets are generated for all microcontrollers in a particular product line.
The CLASS field value is changed for new product lines, for changes in
fab process (for example, a remap or shrink), or any case where the
MAJOR or MINOR fields require differentiation from prior microcontrollers.
The value of the CLASS field is encoded as follows (all other encodings
are reserved):
Value Description
0x06 Stellaris® Firestorm-class microcontrollers
July 25, 2011
187
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
15:8
MAJOR
RO
-
Description
Major Revision
This field specifies the major revision number of the microcontroller.
The major revision reflects changes to base layers of the design. The
major revision number is indicated in the part number as a letter (A for
first revision, B for second, and so on). This field is encoded as follows:
Value Description
0x0
Revision A (initial device)
0x1
Revision B (first base layer revision)
0x2
Revision C (second base layer revision)
and so on.
7:0
MINOR
RO
-
Minor Revision
This field specifies the minor revision number of the microcontroller.
The minor revision reflects changes to the metal layers of the design.
The MINOR field value is reset when the MAJOR field is changed. This
field is numeric and is encoded as follows:
Value Description
0x0
Initial device, or a major revision update.
0x1
First metal layer change.
0x2
Second metal layer change.
and so on.
188
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 2: Brown-Out Reset Control (PBORCTL), offset 0x030
This register is responsible for controlling reset conditions after initial power-on reset.
Brown-Out Reset Control (PBORCTL)
Base 0x400F.E000
Offset 0x030
Type R/W, reset 0x0000.0002
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
BORIOR
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
1
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
Description
31:2
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
1
BORIOR
R/W
1
BOR Interrupt or Reset
Value Description
0
reserved
RO
0
0
A Brown Out Event causes an interrupt to be generated to the
interrupt controller.
1
A Brown Out Event causes a reset of the microcontroller.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
189
Texas Instruments-Production Data
System Control
Register 3: Raw Interrupt Status (RIS), offset 0x050
This register indicates the status for system control raw interrupts. An interrupt is sent to the interrupt
controller if the corresponding bit in the Interrupt Mask Control (IMC) register is set. Writing a 1
to the corresponding bit in the Masked Interrupt Status and Clear (MISC) register clears an interrupt
status bit.
Raw Interrupt Status (RIS)
Base 0x400F.E000
Offset 0x050
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
MOSCPUPRIS
reserved
PLLLRIS
BORRIS
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:9
reserved
RO
0x0000.00
8
MOSCPUPRIS
RO
0
reserved
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
MOSC Power Up Raw Interrupt Status
Value Description
1
Sufficient time has passed for the MOSC to reach the expected
frequency. The value for this power-up time is indicated by
TMOSC_START.
0
Sufficient time has not passed for the MOSC to reach the
expected frequency.
This bit is cleared by writing a 1 to the MOSCPUPMIS bit in the MISC
register.
7
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
6
PLLLRIS
RO
0
PLL Lock Raw Interrupt Status
Value Description
1
The PLL timer has reached TREADY indicating that sufficient time
has passed for the PLL to lock.
0
The PLL timer has not reached TREADY.
This bit is cleared by writing a 1 to the PLLLMIS bit in the MISC register.
5:2
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
190
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
1
BORRIS
RO
0
Description
Brown-Out Reset Raw Interrupt Status
Value Description
1
A brown-out condition is currently active.
0
A brown-out condition is not currently active.
Note the BORIOR bit in the PBORCTL register must be cleared to cause
an interrupt due to a Brown Out Event.
This bit is cleared by writing a 1 to the BORMIS bit in the MISC register.
0
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
191
Texas Instruments-Production Data
System Control
Register 4: Interrupt Mask Control (IMC), offset 0x054
This register contains the mask bits for system control raw interrupts. A raw interrupt, indicated by
a bit being set in the Raw Interrupt Status (RIS) register, is sent to the interrupt controller if the
corresponding bit in this register is set.
Interrupt Mask Control (IMC)
Base 0x400F.E000
Offset 0x054
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
MOSCPUPIM
reserved
PLLLIM
BORIM
reserved
R/W
0
RO
0
R/W
0
RO
0
RO
0
RO
0
RO
0
R/W
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:9
reserved
RO
0x0000.00
8
MOSCPUPIM
R/W
0
reserved
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
MOSC Power Up Interrupt Mask
Value Description
1
An interrupt is sent to the interrupt controller when the
MOSCPUPRIS bit in the RIS register is set.
0
The MOSCPUPRIS interrupt is suppressed and not sent to the
interrupt controller.
7
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
6
PLLLIM
R/W
0
PLL Lock Interrupt Mask
Value Description
5:2
reserved
RO
0x0
1
An interrupt is sent to the interrupt controller when the PLLLRIS
bit in the RIS register is set.
0
The PLLLRIS interrupt is suppressed and not sent to the
interrupt controller.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
192
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
1
BORIM
R/W
0
Description
Brown-Out Reset Interrupt Mask
Value Description
0
reserved
RO
0
1
An interrupt is sent to the interrupt controller when the BORRIS
bit in the RIS register is set.
0
The BORRIS interrupt is suppressed and not sent to the interrupt
controller.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
193
Texas Instruments-Production Data
System Control
Register 5: Masked Interrupt Status and Clear (MISC), offset 0x058
On a read, this register gives the current masked status value of the corresponding interrupt in the
Raw Interrupt Status (RIS) register. All of the bits are R/W1C, thus writing a 1 to a bit clears the
corresponding raw interrupt bit in the RIS register (see page 190).
Masked Interrupt Status and Clear (MISC)
Base 0x400F.E000
Offset 0x058
Type R/W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
MOSCPUPMIS
reserved
PLLLMIS
BORMIS
reserved
R/W1C
0
RO
0
R/W1C
0
RO
0
RO
0
RO
0
RO
0
R/W1C
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:9
reserved
RO
0x0000.00
8
MOSCPUPMIS
R/W1C
0
reserved
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
MOSC Power Up Masked Interrupt Status
Value Description
1
When read, a 1 indicates that an unmasked interrupt was
signaled because sufficient time has passed for the MOSC PLL
to lock.
Writing a 1 to this bit clears it and also the MOSCPUPRIS bit in
the RIS register.
0
When read, a 0 indicates that sufficient time has not passed for
the MOSC PLL to lock.
A write of 0 has no effect on the state of this bit.
7
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
6
PLLLMIS
R/W1C
0
PLL Lock Masked Interrupt Status
Value Description
1
When read, a 1 indicates that an unmasked interrupt was
signaled because sufficient time has passed for the PLL to lock.
Writing a 1 to this bit clears it and also the PLLLRIS bit in the
RIS register.
0
When read, a 0 indicates that sufficient time has not passed for
the PLL to lock.
A write of 0 has no effect on the state of this bit.
194
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
5:2
reserved
RO
0x0
1
BORMIS
R/W1C
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
BOR Masked Interrupt Status
Value Description
1
When read, a 1 indicates that an unmasked interrupt was
signaled because of a brown-out condition.
Writing a 1 to this bit clears it and also the BORRIS bit in the
RIS register.
0
When read, a 0 indicates that a brown-out condition has not
occurred.
A write of 0 has no effect on the state of this bit.
0
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
195
Texas Instruments-Production Data
System Control
Register 6: Reset Cause (RESC), offset 0x05C
This register is set with the reset cause after reset. The bits in this register are sticky and maintain
their state across multiple reset sequences, except when an power-on reset is the cause, in which
case, all bits other than POR in the RESC register are cleared.
Reset Cause (RESC)
Base 0x400F.E000
Offset 0x05C
Type R/W, reset 31
30
29
28
27
26
25
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
RO
0
RO
0
RO
0
RO
0
RO
0
24
23
22
21
20
19
18
17
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
-
9
8
7
6
5
4
3
2
1
0
WDT1
SW
WDT0
BOR
POR
EXT
RO
0
RO
0
RO
0
RO
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
reserved
Type
Reset
MOSCFAIL
reserved
Type
Reset
RO
0
16
Bit/Field
Name
Type
Reset
Description
31:17
reserved
RO
0x000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
16
MOSCFAIL
R/W
-
MOSC Failure Reset
Value Description
1
When read, this bit indicates that the MOSC circuit was enabled
for clock validation and failed, generating a reset event.
0
When read, this bit indicates that a MOSC failure has not
generated a reset since the previous power-on reset.
Writing a 0 to this bit clears it.
15:6
reserved
RO
0x00
5
WDT1
R/W
-
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog Timer 1 Reset
Value Description
1
When read, this bit indicates that Watchdog Timer 1 timed out
and generated a reset.
0
When read, this bit indicates that Watchdog Timer 1 has not
generated a reset since the previous power-on reset.
Writing a 0 to this bit clears it.
196
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
4
SW
R/W
-
Description
Software Reset
Value Description
1
When read, this bit indicates that a software reset has caused
a reset event.
0
When read, this bit indicates that a software reset has not
generated a reset since the previous power-on reset.
Writing a 0 to this bit clears it.
3
WDT0
R/W
-
Watchdog Timer 0 Reset
Value Description
1
When read, this bit indicates that Watchdog Timer 0 timed out
and generated a reset.
0
When read, this bit indicates that Watchdog Timer 0 has not
generated a reset since the previous power-on reset.
Writing a 0 to this bit clears it.
2
BOR
R/W
-
Brown-Out Reset
Value Description
1
When read, this bit indicates that a brown-out reset has caused
a reset event.
0
When read, this bit indicates that a brown-out reset has not
generated a reset since the previous power-on reset.
Writing a 0 to this bit clears it.
1
POR
R/W
-
Power-On Reset
Value Description
1
When read, this bit indicates that a power-on reset has caused
a reset event.
0
When read, this bit indicates that a power-on reset has not
generated a reset.
Writing a 0 to this bit clears it.
0
EXT
R/W
-
External Reset
Value Description
1
When read, this bit indicates that an external reset (RST
assertion) has caused a reset event.
0
When read, this bit indicates that an external reset (RST
assertion) has not caused a reset event since the previous
power-on reset.
Writing a 0 to this bit clears it.
July 25, 2011
197
Texas Instruments-Production Data
System Control
Register 7: Run-Mode Clock Configuration (RCC), offset 0x060
The bits in this register configure the system clock and oscillators.
Run-Mode Clock Configuration (RCC)
Base 0x400F.E000
Offset 0x060
Type R/W, reset 0x0780.3AD1
31
30
29
28
26
25
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
1
15
14
13
12
11
PWRDN
reserved
BYPASS
R/W
1
RO
1
R/W
1
reserved
Type
Reset
reserved
Type
Reset
RO
0
RO
0
27
24
23
R/W
1
R/W
1
R/W
1
10
9
8
R/W
0
R/W
1
ACG
21
20
19
R/W
0
RO
0
RO
0
RO
0
7
6
5
4
3
R/W
1
R/W
1
R/W
0
R/W
1
RO
0
SYSDIV
22
XTAL
Bit/Field
Name
Type
Reset
31:28
reserved
RO
0x0
27
ACG
R/W
0
17
16
RO
0
RO
0
RO
0
2
1
0
reserved
USESYSDIV
R/W
0
18
OSCSRC
reserved
RO
0
IOSCDIS MOSCDIS
R/W
0
R/W
1
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Auto Clock Gating
This bit specifies whether the system uses the Sleep-Mode Clock
Gating Control (SCGCn) registers and Deep-Sleep-Mode Clock
Gating Control (DCGCn) registers if the microcontroller enters a Sleep
or Deep-Sleep mode (respectively).
Value Description
1
The SCGCn or DCGCn registers are used to control the clocks
distributed to the peripherals when the microcontroller is in a
sleep mode. The SCGCn and DCGCn registers allow unused
peripherals to consume less power when the microcontroller is
in a sleep mode.
0
The Run-Mode Clock Gating Control (RCGCn) registers are
used when the microcontroller enters a sleep mode.
The RCGCn registers are always used to control the clocks in Run
mode.
26:23
SYSDIV
R/W
0xF
System Clock Divisor
Specifies which divisor is used to generate the system clock from either
the PLL output or the oscillator source (depending on how the BYPASS
bit in this register is configured). See Table 5-5 on page 179 for bit
encodings.
If the SYSDIV value is less than MINSYSDIV (see page 217), and the
PLL is being used, then the MINSYSDIV value is used as the divisor.
If the PLL is not being used, the SYSDIV value can be less than
MINSYSDIV.
198
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
22
USESYSDIV
R/W
0
Description
Enable System Clock Divider
Value Description
1
The system clock divider is the source for the system clock. The
system clock divider is forced to be used when the PLL is
selected as the source.
If the USERCC2 bit in the RCC2 register is set, then the SYSDIV2
field in the RCC2 register is used as the system clock divider
rather than the SYSDIV field in this register.
0
The system clock is used undivided.
21:14
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
13
PWRDN
R/W
1
PLL Power Down
Value Description
1
The PLL is powered down. Care must be taken to ensure that
another clock source is functioning and that the BYPASS bit is
set before setting this bit.
0
The PLL is operating normally.
12
reserved
RO
1
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
11
BYPASS
R/W
1
PLL Bypass
Value Description
1
The system clock is derived from the OSC source and divided
by the divisor specified by SYSDIV.
0
The system clock is the PLL output clock divided by the divisor
specified by SYSDIV.
See Table 5-5 on page 179 for programming guidelines.
Note:
The ADC must be clocked from the PLL or directly from a
16-MHz clock source to operate properly.
July 25, 2011
199
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
Description
10:6
XTAL
R/W
0x0B
Crystal Value
This field specifies the crystal value attached to the main oscillator. The
encoding for this field is provided below. Depending on the crystal used,
the PLL frequency may not be exactly 400 MHz, see Table
19-8 on page 791 for more information.
Value Crystal Frequency (MHz) Not Crystal Frequency (MHz) Using
Using the PLL
the PLL
0x00
1.000 MHz
reserved
0x01
1.8432 MHz
reserved
0x02
2.000 MHz
reserved
0x03
2.4576 MHz
reserved
0x04
3.579545 MHz
0x05
3.6864 MHz
0x06
4 MHz
0x07
4.096 MHz
0x08
4.9152 MHz
0x09
5 MHz
0x0A
5.12 MHz
0x0B
6 MHz (reset value)
0x0C
6.144 MHz
0x0D
7.3728 MHz
0x0E
8 MHz
0x0F
8.192 MHz
0x10
10.0 MHz
0x11
12.0 MHz
0x12
12.288 MHz
0x13
13.56 MHz
0x14
14.31818 MHz
0x15
16.0 MHz
0x16
16.384 MHz
200
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
5:4
OSCSRC
R/W
0x1
Description
Oscillator Source
Selects the input source for the OSC. The values are:
Value Input Source
0x0
MOSC
Main oscillator
0x1
PIOSC
Precision internal oscillator
(default)
0x2
PIOSC/4
Precision internal oscillator / 4
0x3
30 kHz
30-kHz internal oscillator
For additional oscillator sources, see the RCC2 register.
3:2
reserved
RO
0x0
1
IOSCDIS
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Precision Internal Oscillator Disable
Value Description
0
MOSCDIS
R/W
1
1
The precision internal oscillator (PIOSC) is disabled.
0
The precision internal oscillator is enabled.
Main Oscillator Disable
Value Description
1
The main oscillator is disabled (default).
0
The main oscillator is enabled.
July 25, 2011
201
Texas Instruments-Production Data
System Control
Register 8: XTAL to PLL Translation (PLLCFG), offset 0x064
This register provides a means of translating external crystal frequencies into the appropriate PLL
settings. This register is initialized during the reset sequence and updated anytime that the XTAL
field changes in the Run-Mode Clock Configuration (RCC) register (see page 198).
The PLL frequency is calculated using the PLLCFG field values, as follows:
PLLFreq = OSCFreq * F / (R + 1)
XTAL to PLL Translation (PLLCFG)
Base 0x400F.E000
Offset 0x064
Type RO, reset 31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
-
RO
-
RO
-
RO
-
RO
-
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
reserved
Type
Reset
reserved
Type
Reset
RO
0
RO
0
F
Bit/Field
Name
Type
Reset
31:14
reserved
RO
0x0000.0
13:5
F
RO
-
R
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
PLL F Value
This field specifies the value supplied to the PLL’s F input.
4:0
R
RO
-
PLL R Value
This field specifies the value supplied to the PLL’s R input.
202
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 9: GPIO High-Performance Bus Control (GPIOHBCTL), offset 0x06C
This register controls which internal bus is used to access each GPIO port. When a bit is clear, the
corresponding GPIO port is accessed across the legacy Advanced Peripheral Bus (APB) bus and
through the APB memory aperture. When a bit is set, the corresponding port is accessed across
the Advanced High-Performance Bus (AHB) bus and through the AHB memory aperture. Each
GPIO port can be individually configured to use AHB or APB, but may be accessed only through
one aperture. The AHB bus provides better back-to-back access performance than the APB bus.
The address aperture in the memory map changes for the ports that are enabled for AHB access
(see Table 9-7 on page 406).
GPIO High-Performance Bus Control (GPIOHBCTL)
Base 0x400F.E000
Offset 0x06C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
PORTH
PORTG
PORTF
PORTE
PORTD
PORTC
PORTB
PORTA
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.0
7
PORTH
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Port H Advanced High-Performance Bus
This bit defines the memory aperture for Port H.
Value Description
6
PORTG
R/W
0
1
Advanced High-Performance Bus (AHB)
0
Advanced Peripheral Bus (APB). This bus is the legacy bus.
Port G Advanced High-Performance Bus
This bit defines the memory aperture for Port G.
Value Description
5
PORTF
R/W
0
1
Advanced High-Performance Bus (AHB)
0
Advanced Peripheral Bus (APB). This bus is the legacy bus.
Port F Advanced High-Performance Bus
This bit defines the memory aperture for Port F.
Value Description
1
Advanced High-Performance Bus (AHB)
0
Advanced Peripheral Bus (APB). This bus is the legacy bus.
July 25, 2011
203
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
4
PORTE
R/W
0
Description
Port E Advanced High-Performance Bus
This bit defines the memory aperture for Port E.
Value Description
3
PORTD
R/W
0
1
Advanced High-Performance Bus (AHB)
0
Advanced Peripheral Bus (APB). This bus is the legacy bus.
Port D Advanced High-Performance Bus
This bit defines the memory aperture for Port D.
Value Description
2
PORTC
R/W
0
1
Advanced High-Performance Bus (AHB)
0
Advanced Peripheral Bus (APB). This bus is the legacy bus.
Port C Advanced High-Performance Bus
This bit defines the memory aperture for Port C.
Value Description
1
PORTB
R/W
0
1
Advanced High-Performance Bus (AHB)
0
Advanced Peripheral Bus (APB). This bus is the legacy bus.
Port B Advanced High-Performance Bus
This bit defines the memory aperture for Port B.
Value Description
0
PORTA
R/W
0
1
Advanced High-Performance Bus (AHB)
0
Advanced Peripheral Bus (APB). This bus is the legacy bus.
Port A Advanced High-Performance Bus
This bit defines the memory aperture for Port A.
Value Description
1
Advanced High-Performance Bus (AHB)
0
Advanced Peripheral Bus (APB). This bus is the legacy bus.
204
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 10: Run-Mode Clock Configuration 2 (RCC2), offset 0x070
This register overrides the RCC equivalent register fields, as shown in Table 5-9, when the USERCC2
bit is set, allowing the extended capabilities of the RCC2 register to be used while also providing a
means to be backward-compatible to previous parts. Each RCC2 field that supersedes an RCC
field is located at the same LSB bit position; however, some RCC2 fields are larger than the
corresponding RCC field.
Table 5-9. RCC2 Fields that Override RCC Fields
RCC2 Field...
Overrides RCC Field
SYSDIV2, bits[28:23]
SYSDIV, bits[26:23]
PWRDN2, bit[13]
PWRDN, bit[13]
BYPASS2, bit[11]
BYPASS, bit[11]
OSCSRC2, bits[6:4]
OSCSRC, bits[5:4]
Run-Mode Clock Configuration 2 (RCC2)
Base 0x400F.E000
Offset 0x070
Type R/W, reset 0x07C0.6810
31
30
USERCC2 DIV400
Type
Reset
R/W
0
R/W
0
15
14
reserved
Type
Reset
RO
0
RO
0
29
28
27
26
25
24
23
SYSDIV2
reserved
RO
0
R/W
0
22
R/W
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
10
9
8
7
6
13
12
11
PWRDN2
reserved
BYPASS2
R/W
1
RO
0
R/W
1
reserved
RO
0
21
20
19
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31
USERCC2
R/W
0
Use RCC2
R/W
0
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
5
4
3
2
1
0
RO
0
RO
0
OSCSRC2
RO
0
18
reserved
SYSDIV2LSB
R/W
0
reserved
R/W
1
RO
0
RO
0
Value Description
30
DIV400
R/W
0
1
The RCC2 register fields override the RCC register fields.
0
The RCC register fields are used, and the fields in RCC2 are
ignored.
Divide PLL as 400 MHz vs. 200 MHz
This bit, along with the SYSDIV2LSB bit, allows additional frequency
choices.
Value Description
29
reserved
RO
0x0
1
Append the SYSDIV2LSB bit to the SYSDIV2 field to create a
7 bit divisor using the 400 MHz PLL output, see Table
5-7 on page 180.
0
Use SYSDIV2 as is and apply to 200 MHz predivided PLL
output. See Table 5-6 on page 179 for programming guidelines.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
205
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
Description
28:23
SYSDIV2
R/W
0x0F
System Clock Divisor 2
Specifies which divisor is used to generate the system clock from either
the PLL output or the oscillator source (depending on how the BYPASS2
bit is configured). SYSDIV2 is used for the divisor when both the
USESYSDIV bit in the RCC register and the USERCC2 bit in this register
are set. See Table 5-6 on page 179 for programming guidelines.
22
SYSDIV2LSB
R/W
1
Additional LSB for SYSDIV2
When DIV400 is set, this bit becomes the LSB of SYSDIV2. If DIV400
is clear, this bit is not used. See Table 5-6 on page 179 for programming
guidelines.
This bit can only be set or cleared when DIV400 is set.
21:14
reserved
RO
0x0
13
PWRDN2
R/W
1
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Power-Down PLL 2
Value Description
1
The PLL is powered down.
0
The PLL operates normally.
12
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
11
BYPASS2
R/W
1
PLL Bypass 2
Value Description
1
The system clock is derived from the OSC source and divided
by the divisor specified by SYSDIV2.
0
The system clock is the PLL output clock divided by the divisor
specified by SYSDIV2.
See Table 5-6 on page 179 for programming guidelines.
Note:
10:7
reserved
RO
0x0
The ADC must be clocked from the PLL or directly from a
16-MHz clock source to operate properly.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
206
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
6:4
OSCSRC2
R/W
0x1
Description
Oscillator Source 2
Selects the input source for the OSC. The values are:
Value
Description
0x0
MOSC
Main oscillator
0x1
PIOSC
Precision internal oscillator
0x2
PIOSC/4
Precision internal oscillator / 4
0x3
30 kHz
30-kHz internal oscillator
0x4-0x6 Reserved
0x7
32.768 kHz
32.768-kHz external oscillator
3:0
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
207
Texas Instruments-Production Data
System Control
Register 11: Main Oscillator Control (MOSCCTL), offset 0x07C
This register provides the ability to enable the MOSC clock verification circuit. When enabled, this
circuit monitors the frequency of the MOSC to verify that the oscillator is operating within specified
limits. If the clock goes invalid after being enabled, the microcontroller issues a power-on reset and
reboots to the NMI handler.
Main Oscillator Control (MOSCCTL)
Base 0x400F.E000
Offset 0x07C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:1
reserved
RO
0x0000.000
0
CVAL
R/W
0
RO
0
CVAL
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Clock Validation for MOSC
Value Description
1
The MOSC monitor circuit is enabled.
0
The MOSC monitor circuit is disabled.
208
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 12: Deep Sleep Clock Configuration (DSLPCLKCFG), offset 0x144
This register provides configuration information for the hardware control of Deep Sleep Mode.
Deep Sleep Clock Configuration (DSLPCLKCFG)
Base 0x400F.E000
Offset 0x144
Type R/W, reset 0x0780.0000
31
30
29
28
27
26
reserved
Type
Reset
25
24
23
22
21
20
DSDIVORIDE
18
17
16
reserved
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
1
R/W
1
R/W
1
R/W
1
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
19
DSOSCSRC
RO
0
Bit/Field
Name
Type
Reset
31:29
reserved
RO
0x0
28:23
DSDIVORIDE
R/W
0x0F
R/W
0
reserved
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Divider Field Override
If Deep-Sleep mode is enabled when the PLL is running, the PLL is
disabled. This 6-bit field contains a system divider field that overrides
the SYSDIV field in the RCC register or the SYSDIV2 field in the RCC2
register during Deep Sleep. This divider is applied to the source selected
by the DSOSCSRC field.
Value Description
0x0
/1
0x1
/2
0x2
/3
0x3
/4
...
...
0x3F /64
22:7
reserved
RO
0x000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
209
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
6:4
DSOSCSRC
R/W
0x0
Description
Clock Source
Specifies the clock source during Deep-Sleep mode.
Value
Description
0x0
MOSC
Use the main oscillator as the source.
Note:
0x1
If the PIOSC is being used as the clock reference
for the PLL, the PIOSC is the clock source instead
of MOSC in Deep-Sleep mode.
PIOSC
Use the precision internal 16-MHz oscillator as the source.
0x2
Reserved
0x3
30 kHz
Use the 30-kHz internal oscillator as the source.
0x4-0x6 Reserved
0x7
32.768 kHz
Use the Hibernation module 32.768-kHz external oscillator
as the source.
3:0
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
210
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 13: Precision Internal Oscillator Calibration (PIOSCCAL), offset 0x150
This register provides the ability to update or recalibrate the precision internal oscillator. Note that
a 32.768-kHz oscillator must be used as the Hibernation module clock source for the user to be
able to calibrate the PIOSC.
Precision Internal Oscillator Calibration (PIOSCCAL)
Base 0x400F.E000
Offset 0x150
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
22
21
20
19
18
17
16
R/W
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
CAL
UPDATE
reserved
R/W
0
R/W
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
UTEN
Type
Reset
reserved
reserved
Type
Reset
23
RO
0
Bit/Field
Name
Type
Reset
31
UTEN
R/W
0
UT
Description
Use User Trim Value
Value Description
30:10
reserved
RO
0x0000
9
CAL
R/W
0
1
The trim value in bits[6:0] of this register are used for any update
trim operation.
0
The factory calibration value is used for an update trim operation.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Start Calibration
Value Description
1
Starts a new calibration of the PIOSC. Results are in the
PIOSCSTAT register. The resulting trim value from the operation
is active in the PIOSC after the calibration completes. The result
overrides any previous update trim operation whether the
calibration passes or fails.
0
No action.
This bit is auto-cleared after it is set.
8
UPDATE
R/W
0
Update Trim
Value Description
1
Updates the PIOSC trim value with the UT bit or the DT bit in
the PIOSCSTAT register. Used with UTEN.
0
No action.
This bit is auto-cleared after the update.
7
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
211
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
6:0
UT
R/W
0x0
Description
User Trim Value
User trim value that can be loaded into the PIOSC.
Refer to “Main PLL Frequency Configuration” on page 181 for more
information on calibrating the PIOSC.
212
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 14: Precision Internal Oscillator Statistics (PIOSCSTAT), offset 0x154
This register provides the user information on the PIOSC calibration. Note that a 32.768-kHz oscillator
must be used as the Hibernation module clock source for the user to be able to calibrate the PIOSC.
Precision Internal Oscillator Statistics (PIOSCSTAT)
Base 0x400F.E000
Offset 0x154
Type RO, reset 0x0000.0040
31
30
29
28
RO
0
RO
0
RO
0
RO
0
15
14
13
12
RO
0
RO
0
RO
0
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
1
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
DT
reserved
Type
Reset
RO
0
RESULT
CT
reserved
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:23
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
22:16
DT
RO
-
Default Trim Value
This field contains the default trim value. This value is loaded into the
PIOSC after every full power-up.
15:10
reserved
RO
0x0
9:8
RESULT
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Calibration Result
Value Description
7
reserved
RO
0
6:0
CT
RO
0x40
0x0
Calibration has not been attempted.
0x1
The last calibration operation completed to meet 1% accuracy.
0x2
The last calibration operation failed to meet 1% accuracy.
0x3
Reserved
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Calibration Trim Value
This field contains the trim value from the last calibration operation. After
factory calibration CT and DT are the same.
July 25, 2011
213
Texas Instruments-Production Data
System Control
Register 15: Device Identification 1 (DID1), offset 0x004
This register identifies the device family, part number, temperature range, pin count, and package
type. Each microcontroller is uniquely identified by the combined values of the CLASS field in the
DID0 register and the PARTNO field in the DID1 register.
Device Identification 1 (DID1)
Base 0x400F.E000
Offset 0x004
Type RO, reset 31
30
29
28
27
26
RO
0
15
25
24
23
22
21
20
RO
0
RO
0
RO
1
RO
0
RO
0
RO
0
RO
0
RO
1
RO
0
RO
0
RO
1
14
13
12
11
10
9
8
7
6
5
4
RO
0
RO
0
RO
0
RO
0
RO
0
RO
-
RO
-
RO
-
VER
Type
Reset
FAM
PINCOUNT
Type
Reset
RO
0
RO
1
18
17
16
RO
0
RO
1
RO
0
RO
1
3
2
1
0
PARTNO
reserved
RO
0
19
TEMP
Bit/Field
Name
Type
Reset
31:28
VER
RO
0x1
RO
-
PKG
ROHS
RO
-
RO
1
QUAL
RO
-
RO
-
Description
DID1 Version
This field defines the DID1 register format version. The version number
is numeric. The value of the VER field is encoded as follows (all other
encodings are reserved):
Value Description
0x1
27:24
FAM
RO
0x0
Second version of the DID1 register format.
Family
This field provides the family identification of the device within the
Luminary Micro product portfolio. The value is encoded as follows (all
other encodings are reserved):
Value Description
0x0
23:16
PARTNO
RO
0x95
Stellaris family of microcontollers, that is, all devices with
external part numbers starting with LM3S.
Part Number
This field provides the part number of the device within the family. The
value is encoded as follows (all other encodings are reserved):
Value Description
0x95 LM3S1G58
15:13
PINCOUNT
RO
0x2
Package Pin Count
This field specifies the number of pins on the device package. The value
is encoded as follows (all other encodings are reserved):
Value Description
0x2
100-pin package
214
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
Description
12:8
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7:5
TEMP
RO
-
Temperature Range
This field specifies the temperature rating of the device. The value is
encoded as follows (all other encodings are reserved):
Value Description
4:3
PKG
RO
-
0x0
Commercial temperature range (0°C to 70°C)
0x1
Industrial temperature range (-40°C to 85°C)
0x2
Extended temperature range (-40°C to 105°C)
Package Type
This field specifies the package type. The value is encoded as follows
(all other encodings are reserved):
Value Description
2
ROHS
RO
1
0x0
SOIC package
0x1
LQFP package
0x2
BGA package
RoHS-Compliance
This bit specifies whether the device is RoHS-compliant. A 1 indicates
the part is RoHS-compliant.
1:0
QUAL
RO
-
Qualification Status
This field specifies the qualification status of the device. The value is
encoded as follows (all other encodings are reserved):
Value Description
0x0
Engineering Sample (unqualified)
0x1
Pilot Production (unqualified)
0x2
Fully Qualified
July 25, 2011
215
Texas Instruments-Production Data
System Control
Register 16: Device Capabilities 0 (DC0), offset 0x008
This register is predefined by the part and can be used to verify features.
Device Capabilities 0 (DC0)
Base 0x400F.E000
Offset 0x008
Type RO, reset 0x00FF.00BF
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
SRAMSZ
Type
Reset
FLASHSZ
Type
Reset
RO
1
Bit/Field
Name
Type
Reset
Description
31:16
SRAMSZ
RO
0x00FF
SRAM Size
Indicates the size of the on-chip SRAM memory.
Value
Description
0x00FF 64 KB of SRAM
15:0
FLASHSZ
RO
0x00BF
Flash Size
Indicates the size of the on-chip flash memory.
Value
Description
0x00BF 384 KB of Flash
216
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 17: Device Capabilities 1 (DC1), offset 0x010
This register is predefined by the part and can be used to verify features. If any bit is clear in this
register, the module is not present. The corresponding bit in the RCGC0, SCGC0, and DCGC0
registers cannot be set.
Device Capabilities 1 (DC1)
Base 0x400F.E000
Offset 0x010
Type RO, reset 31
30
29
reserved
Type
Reset
28
26
25
24
23
WDT1
22
21
20
19
18
16
ADC1
ADC0
RO
0
RO
0
RO
1
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
MPU
HIB
TEMPSNS
PLL
WDT0
SWO
SWD
JTAG
RO
-
RO
-
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
-
RO
-
reserved
17
RO
0
MINSYSDIV
Type
Reset
27
MAXADC1SPD
MAXADC0SPD
RO
1
RO
1
RO
1
RO
1
Bit/Field
Name
Type
Reset
Description
31:29
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
28
WDT1
RO
1
Watchdog Timer 1 Present
When set, indicates that watchdog timer 1 is present.
27:18
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
17
ADC1
RO
1
ADC Module 1 Present
When set, indicates that ADC module 1 is present.
16
ADC0
RO
1
ADC Module 0 Present
When set, indicates that ADC module 0 is present
15:12
MINSYSDIV
RO
-
System Clock Divider
Minimum 4-bit divider value for system clock. The reset value is
hardware-dependent. See the RCC register for how to change the
system clock divisor using the SYSDIV bit.
Value Description
0x1
Specifies an 80-MHz CPU clock with a PLL divider of 2.5.
0x2
Specifies a 66.67-MHz CPU clock with a PLL divider of 3.
0x3
Specifies a 50-MHz CPU clock with a PLL divider of 4.
0x7
Specifies a 25-MHz clock with a PLL divider of 8.
0x9
Specifies a 20-MHz clock with a PLL divider of 10.
July 25, 2011
217
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
11:10
MAXADC1SPD
RO
0x3
Description
Max ADC1 Speed
This field indicates the maximum rate at which the ADC samples data.
Value Description
0x3
9:8
MAXADC0SPD
RO
0x3
1M samples/second
Max ADC0 Speed
This field indicates the maximum rate at which the ADC samples data.
Value Description
0x3
7
MPU
RO
1
1M samples/second
MPU Present
When set, indicates that the Cortex-M3 Memory Protection Unit (MPU)
module is present. See the "Cortex-M3 Peripherals" chapter for details
on the MPU.
6
HIB
RO
1
Hibernation Module Present
When set, indicates that the Hibernation module is present.
5
TEMPSNS
RO
1
Temp Sensor Present
When set, indicates that the on-chip temperature sensor is present.
4
PLL
RO
1
PLL Present
When set, indicates that the on-chip Phase Locked Loop (PLL) is
present.
3
WDT0
RO
1
Watchdog Timer 0 Present
When set, indicates that watchdog timer 0 is present.
2
SWO
RO
1
SWO Trace Port Present
When set, indicates that the Serial Wire Output (SWO) trace port is
present.
1
SWD
RO
1
SWD Present
When set, indicates that the Serial Wire Debugger (SWD) is present.
0
JTAG
RO
1
JTAG Present
When set, indicates that the JTAG debugger interface is present.
218
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 18: Device Capabilities 2 (DC2), offset 0x014
This register is predefined by the part and can be used to verify features. If any bit is clear in this
register, the module is not present. The corresponding bit in the RCGC0, SCGC0, and DCGC0
registers cannot be set.
Device Capabilities 2 (DC2)
Base 0x400F.E000
Offset 0x014
Type RO, reset 0x000F.5037
31
30
29
28
27
26
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
reserved
I2C1
reserved
I2C0
RO
0
RO
1
RO
0
RO
1
RO
0
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
TIMER3
TIMER2
TIMER1
TIMER0
RO
1
RO
1
RO
1
RO
1
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
SSI1
SSI0
reserved
UART2
UART1
UART0
RO
1
RO
1
RO
0
RO
1
RO
1
RO
1
reserved
Type
Reset
Type
Reset
reserved
Bit/Field
Name
Type
Reset
Description
31:20
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
19
TIMER3
RO
1
Timer Module 3 Present
When set, indicates that General-Purpose Timer module 3 is present.
18
TIMER2
RO
1
Timer Module 2 Present
When set, indicates that General-Purpose Timer module 2 is present.
17
TIMER1
RO
1
Timer Module 1 Present
When set, indicates that General-Purpose Timer module 1 is present.
16
TIMER0
RO
1
Timer Module 0 Present
When set, indicates that General-Purpose Timer module 0 is present.
15
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
14
I2C1
RO
1
I2C Module 1 Present
When set, indicates that I2C module 1 is present.
13
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
12
I2C0
RO
1
I2C Module 0 Present
When set, indicates that I2C module 0 is present.
11:6
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
5
SSI1
RO
1
SSI Module 1 Present
When set, indicates that SSI module 1 is present.
July 25, 2011
219
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
4
SSI0
RO
1
Description
SSI Module 0 Present
When set, indicates that SSI module 0 is present.
3
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
2
UART2
RO
1
UART Module 2 Present
When set, indicates that UART module 2 is present.
1
UART1
RO
1
UART Module 1 Present
When set, indicates that UART module 1 is present.
0
UART0
RO
1
UART Module 0 Present
When set, indicates that UART module 0 is present.
220
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 19: Device Capabilities 3 (DC3), offset 0x018
This register is predefined by the part and can be used to verify features. If any bit is clear in this
register, the module is not present. The corresponding bit in the RCGC0, SCGC0, and DCGC0
registers cannot be set.
Device Capabilities 3 (DC3)
Base 0x400F.E000
Offset 0x018
Type RO, reset 0xBFFF.0000
Type
Reset
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
32KHZ
reserved
CCP5
CCP4
CCP3
CCP2
CCP1
CCP0
RO
1
RO
0
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
ADC0AIN7 ADC0AIN6 ADC0AIN5 ADC0AIN4 ADC0AIN3 ADC0AIN2 ADC0AIN1 ADC0AIN0
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31
32KHZ
RO
1
Description
32KHz Input Clock Available
When set, indicates an even CCP pin is present and can be used as a
32-KHz input clock.
30
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
29
CCP5
RO
1
CCP5 Pin Present
When set, indicates that Capture/Compare/PWM pin 5 is present.
28
CCP4
RO
1
CCP4 Pin Present
When set, indicates that Capture/Compare/PWM pin 4 is present.
27
CCP3
RO
1
CCP3 Pin Present
When set, indicates that Capture/Compare/PWM pin 3 is present.
26
CCP2
RO
1
CCP2 Pin Present
When set, indicates that Capture/Compare/PWM pin 2 is present.
25
CCP1
RO
1
CCP1 Pin Present
When set, indicates that Capture/Compare/PWM pin 1 is present.
24
CCP0
RO
1
CCP0 Pin Present
When set, indicates that Capture/Compare/PWM pin 0 is present.
23
ADC0AIN7
RO
1
ADC Module 0 AIN7 Pin Present
When set, indicates that ADC module 0 input pin 7 is present.
22
ADC0AIN6
RO
1
ADC Module 0 AIN6 Pin Present
When set, indicates that ADC module 0 input pin 6 is present.
21
ADC0AIN5
RO
1
ADC Module 0 AIN5 Pin Present
When set, indicates that ADC module 0 input pin 5 is present.
July 25, 2011
221
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
20
ADC0AIN4
RO
1
Description
ADC Module 0 AIN4 Pin Present
When set, indicates that ADC module 0 input pin 4 is present.
19
ADC0AIN3
RO
1
ADC Module 0 AIN3 Pin Present
When set, indicates that ADC module 0 input pin 3 is present.
18
ADC0AIN2
RO
1
ADC Module 0 AIN2 Pin Present
When set, indicates that ADC module 0 input pin 2 is present.
17
ADC0AIN1
RO
1
ADC Module 0 AIN1 Pin Present
When set, indicates that ADC module 0 input pin 1 is present.
16
ADC0AIN0
RO
1
ADC Module 0 AIN0 Pin Present
When set, indicates that ADC module 0 input pin 0 is present.
15:0
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
222
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 20: Device Capabilities 4 (DC4), offset 0x01C
This register is predefined by the part and can be used to verify features. If any bit is clear in this
register, the module is not present. The corresponding bit in the RCGC0, SCGC0, and DCGC0
registers cannot be set.
Device Capabilities 4 (DC4)
Base 0x400F.E000
Offset 0x01C
Type RO, reset 0x0004.F0FF
31
30
29
28
27
26
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
CCP7
CCP6
UDMA
ROM
RO
1
RO
1
RO
1
RO
1
RO
0
RO
0
25
24
23
22
21
20
19
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
0
RO
0
9
8
7
6
5
4
3
2
1
0
GPIOH
GPIOG
GPIOF
GPIOE
GPIOD
GPIOC
GPIOB
GPIOA
RO
0
RO
0
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
reserved
Type
Reset
Type
Reset
18
17
PICAL
reserved
16
reserved
Bit/Field
Name
Type
Reset
Description
31:19
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
18
PICAL
RO
1
PIOSC Calibrate
When set, indicates that the PIOSC can be calibrated.
17:16
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15
CCP7
RO
1
CCP7 Pin Present
When set, indicates that Capture/Compare/PWM pin 7 is present.
14
CCP6
RO
1
CCP6 Pin Present
When set, indicates that Capture/Compare/PWM pin 6 is present.
13
UDMA
RO
1
Micro-DMA Module Present
When set, indicates that the micro-DMA module present.
12
ROM
RO
1
Internal Code ROM Present
When set, indicates that internal code ROM is present.
11:8
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7
GPIOH
RO
1
GPIO Port H Present
When set, indicates that GPIO Port H is present.
6
GPIOG
RO
1
GPIO Port G Present
When set, indicates that GPIO Port G is present.
5
GPIOF
RO
1
GPIO Port F Present
When set, indicates that GPIO Port F is present.
July 25, 2011
223
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
4
GPIOE
RO
1
Description
GPIO Port E Present
When set, indicates that GPIO Port E is present.
3
GPIOD
RO
1
GPIO Port D Present
When set, indicates that GPIO Port D is present.
2
GPIOC
RO
1
GPIO Port C Present
When set, indicates that GPIO Port C is present.
1
GPIOB
RO
1
GPIO Port B Present
When set, indicates that GPIO Port B is present.
0
GPIOA
RO
1
GPIO Port A Present
When set, indicates that GPIO Port A is present.
224
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 21: Device Capabilities 5 (DC5), offset 0x020
This register is predefined by the part and can be used to verify features. If any bit is clear in this
register, the module is not present. The corresponding bit in the RCGC0, SCGC0, and DCGC0
registers cannot be set.
Device Capabilities 5 (DC5)
Base 0x400F.E000
Offset 0x020
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:0
reserved
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
225
Texas Instruments-Production Data
System Control
Register 22: Device Capabilities 6 (DC6), offset 0x024
This register is predefined by the part and can be used to verify features. If any bit is clear in this
register, the module is not present. The corresponding bit in the RCGC0, SCGC0, and DCGC0
registers cannot be set.
Device Capabilities 6 (DC6)
Base 0x400F.E000
Offset 0x024
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:0
reserved
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
226
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 23: Device Capabilities 7 (DC7), offset 0x028
This register is predefined by the part and can be used to verify uDMA channel features. A 1 indicates
the channel is available on this device; a 0 that the channel is only available on other devices in the
family. Most channels have primary and secondary assignments. If the primary function is not
available on this microcontroller, the secondary function becomes the primary function. If the
secondary function is not available, the primary function is the only option.
Device Capabilities 7 (DC7)
Base 0x400F.E000
Offset 0x028
Type RO, reset 0xFFFF.FFFF
31
reserved
Type
Reset
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
DMACH30 DMACH29 DMACH28 DMACH27 DMACH26 DMACH25 DMACH24 DMACH23 DMACH22 DMACH21 DMACH20 DMACH19 DMACH18 DMACH17 DMACH16
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
DMACH15 DMACH14 DMACH13 DMACH12 DMACH11 DMACH10 DMACH9 DMACH8 DMACH7 DMACH6 DMACH5 DMACH4 DMACH3 DMACH2 DMACH1 DMACH0
Type
Reset
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
Bit/Field
Name
Type
Reset
31
reserved
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
Description
Reserved
Reserved for uDMA channel 31.
30
DMACH30
RO
1
SW
When set, indicates uDMA channel 30 is available for software transfers.
29
DMACH29
RO
1
I2S0_TX / CAN1_TX
When set, indicates uDMA channel 29 is available and connected to
the transmit path of I2S module 0. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of CAN module 1 transmit.
28
DMACH28
RO
1
I2S0_RX / CAN1_RX
When set, indicates uDMA channel 28 is available and connected to
the receive path of I2S module 0. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of CAN module 1 receive.
27
DMACH27
RO
1
CAN1_TX / ADC1_SS3
When set, indicates uDMA channel 27 is available and connected to
the transmit path of CAN module 1. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of ADC module 1 Sample Sequencer
3.
26
DMACH26
RO
1
CAN1_RX / ADC1_SS2
When set, indicates uDMA channel 26 is available and connected to
the receive path of CAN module 1. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of ADC module 1 Sample Sequencer
2.
July 25, 2011
227
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
25
DMACH25
RO
1
Description
SSI1_TX / ADC1_SS1
When set, indicates uDMA channel 25 is available and connected to
the transmit path of SSI module 1. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of ADC module 1 Sample Sequencer
1.
24
DMACH24
RO
1
SSI1_RX / ADC1_SS0
When set, indicates uDMA channel 24 is available and connected to
the receive path of SSI module 1. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of ADC module 1 Sample Sequencer
0.
23
DMACH23
RO
1
UART1_TX / CAN2_TX
When set, indicates uDMA channel 23 is available and connected to
the transmit path of UART module 1. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of CAN module 2 transmit.
22
DMACH22
RO
1
UART1_RX / CAN2_RX
When set, indicates uDMA channel 22 is available and connected to
the receive path of UART module 1. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of CAN module 2 receive.
21
DMACH21
RO
1
Timer1B / EPI0_WFIFO
When set, indicates uDMA channel 21 is available and connected to
Timer 1B. If the corresponding bit in the DMACHASGN register is set,
the channel is connected instead to the secondary channel assignment
of EPI module 0 write FIFO (WRIFO).
20
DMACH20
RO
1
Timer1A / EPI0_NBRFIFO
When set, indicates uDMA channel 20 is available and connected to
Timer 1A. If the corresponding bit in the DMACHASGN register is set,
the channel is connected instead to the secondary channel assignment
of EPI module 0 non-blocking read FIFO (NBRFIFO).
19
DMACH19
RO
1
Timer0B / Timer1B
When set, indicates uDMA channel 19 is available and connected to
Timer 0B. If the corresponding bit in the DMACHASGN register is set,
the channel is connected instead to the secondary channel assignment
of Timer 1B.
18
DMACH18
RO
1
Timer0A / Timer1A
When set, indicates uDMA channel 18 is available and connected to
Timer 0A. If the corresponding bit in the DMACHASGN register is set,
the channel is connected instead to the secondary channel assignment
of Timer 1A.
17
DMACH17
RO
1
ADC0_SS3
When set, indicates uDMA channel 17 is available and connected to
ADC module 0 Sample Sequencer 3.
16
DMACH16
RO
1
ADC0_SS2
When set, indicates uDMA channel 16 is available and connected to
ADC module 0 Sample Sequencer 2.
228
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
15
DMACH15
RO
1
Description
ADC0_SS1 / Timer2B
When set, indicates uDMA channel 15 is available and connected to
ADC module 0 Sample Sequencer 1. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of Timer 2B.
14
DMACH14
RO
1
ADC0_SS0 / Timer2A
When set, indicates uDMA channel 14 is available and connected to
ADC module 0 Sample Sequencer 0. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of Timer 2A.
13
DMACH13
RO
1
CAN0_TX / UART2_TX
When set, indicates uDMA channel 13 is available and connected to
the transmit path of CAN module 0. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of UART module 2 transmit.
12
DMACH12
RO
1
CAN0_RX / UART2_RX
When set, indicates uDMA channel 12 is available and connected to
the receive path of CAN module 0. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of UART module 2 receive.
11
DMACH11
RO
1
SSI0_TX / SSI1_TX
When set, indicates uDMA channel 11 is available and connected to
the transmit path of SSI module 0. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of SSI module 1 transmit.
10
DMACH10
RO
1
SSI0_RX / SSI1_RX
When set, indicates uDMA channel 10 is available and connected to
the receive path of SSI module 0. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of SSI module 1 receive.
9
DMACH9
RO
1
UART0_TX / UART1_TX
When set, indicates uDMA channel 9 is available and connected to the
transmit path of UART module 0. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of UART module 1 transmit.
8
DMACH8
RO
1
UART0_RX / UART1_RX
When set, indicates uDMA channel 8 is available and connected to the
receive path of UART module 0. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of UART module 1 receive.
7
DMACH7
RO
1
ETH_TX / Timer2B
When set, indicates uDMA channel 7 is available and connected to the
transmit path of the Ethernet module. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of Timer 2B.
July 25, 2011
229
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
6
DMACH6
RO
1
Description
ETH_RX / Timer2A
When set, indicates uDMA channel 6 is available and connected to the
receive path of the Ethernet module. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of Timer 2A.
5
DMACH5
RO
1
USB_EP3_TX / Timer2B
When set, indicates uDMA channel 5 is available and connected to the
transmit path of USB endpoint 3. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of Timer 2B.
4
DMACH4
RO
1
USB_EP3_RX / Timer2A
When set, indicates uDMA channel 4 is available and connected to the
receive path of USB endpoint 3. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of Timer 2A.
3
DMACH3
RO
1
USB_EP2_TX / Timer3B
When set, indicates uDMA channel 3 is available and connected to the
transmit path of USB endpoint 2. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of Timer 3B.
2
DMACH2
RO
1
USB_EP2_RX / Timer3A
When set, indicates uDMA channel 2 is available and connected to the
receive path of USB endpoint 2. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of Timer 3A.
1
DMACH1
RO
1
USB_EP1_TX / UART2_TX
When set, indicates uDMA channel 1 is available and connected to the
transmit path of USB endpoint 1. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of UART module 2 transmit.
0
DMACH0
RO
1
USB_EP1_RX / UART2_RX
When set, indicates uDMA channel 0 is available and connected to the
receive path of USB endpoint 1. If the corresponding bit in the
DMACHASGN register is set, the channel is connected instead to the
secondary channel assignment of UART module 2 receive.
230
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 24: Device Capabilities 8 ADC Channels (DC8), offset 0x02C
This register is predefined by the part and can be used to verify features.
Device Capabilities 8 ADC Channels (DC8)
Base 0x400F.E000
Offset 0x02C
Type RO, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
ADC1AIN15 ADC1AIN14 ADC1AIN13 ADC1AIN12 ADC1AIN11 ADC1AIN10 ADC1AIN9 ADC1AIN8 ADC1AIN7 ADC1AIN6 ADC1AIN5 ADC1AIN4 ADC1AIN3 ADC1AIN2 ADC1AIN1 ADC1AIN0
Type
Reset
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
ADC0AIN15 ADC0AIN14 ADC0AIN13 ADC0AIN12 ADC0AIN11 ADC0AIN10 ADC0AIN9 ADC0AIN8 ADC0AIN7 ADC0AIN6 ADC0AIN5 ADC0AIN4 ADC0AIN3 ADC0AIN2 ADC0AIN1 ADC0AIN0
Type
Reset
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
Bit/Field
Name
Type
Reset
31
ADC1AIN15
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
Description
ADC Module 1 AIN15 Pin Present
When set, indicates that ADC module 1 input pin 15 is present.
30
ADC1AIN14
RO
1
ADC Module 1 AIN14 Pin Present
When set, indicates that ADC module 1 input pin 14 is present.
29
ADC1AIN13
RO
1
ADC Module 1 AIN13 Pin Present
When set, indicates that ADC module 1 input pin 13 is present.
28
ADC1AIN12
RO
1
ADC Module 1 AIN12 Pin Present
When set, indicates that ADC module 1 input pin 12 is present.
27
ADC1AIN11
RO
1
ADC Module 1 AIN11 Pin Present
When set, indicates that ADC module 1 input pin 11 is present.
26
ADC1AIN10
RO
1
ADC Module 1 AIN10 Pin Present
When set, indicates that ADC module 1 input pin 10 is present.
25
ADC1AIN9
RO
1
ADC Module 1 AIN9 Pin Present
When set, indicates that ADC module 1 input pin 9 is present.
24
ADC1AIN8
RO
1
ADC Module 1 AIN8 Pin Present
When set, indicates that ADC module 1 input pin 8 is present.
23
ADC1AIN7
RO
1
ADC Module 1 AIN7 Pin Present
When set, indicates that ADC module 1 input pin 7 is present.
22
ADC1AIN6
RO
1
ADC Module 1 AIN6 Pin Present
When set, indicates that ADC module 1 input pin 6 is present.
21
ADC1AIN5
RO
1
ADC Module 1 AIN5 Pin Present
When set, indicates that ADC module 1 input pin 5 is present.
20
ADC1AIN4
RO
1
ADC Module 1 AIN4 Pin Present
When set, indicates that ADC module 1 input pin 4 is present.
July 25, 2011
231
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
19
ADC1AIN3
RO
1
Description
ADC Module 1 AIN3 Pin Present
When set, indicates that ADC module 1 input pin 3 is present.
18
ADC1AIN2
RO
1
ADC Module 1 AIN2 Pin Present
When set, indicates that ADC module 1 input pin 2 is present.
17
ADC1AIN1
RO
1
ADC Module 1 AIN1 Pin Present
When set, indicates that ADC module 1 input pin 1 is present.
16
ADC1AIN0
RO
1
ADC Module 1 AIN0 Pin Present
When set, indicates that ADC module 1 input pin 0 is present.
15
ADC0AIN15
RO
1
ADC Module 0 AIN15 Pin Present
When set, indicates that ADC module 0 input pin 15 is present.
14
ADC0AIN14
RO
1
ADC Module 0 AIN14 Pin Present
When set, indicates that ADC module 0 input pin 14 is present.
13
ADC0AIN13
RO
1
ADC Module 0 AIN13 Pin Present
When set, indicates that ADC module 0 input pin 13 is present.
12
ADC0AIN12
RO
1
ADC Module 0 AIN12 Pin Present
When set, indicates that ADC module 0 input pin 12 is present.
11
ADC0AIN11
RO
1
ADC Module 0 AIN11 Pin Present
When set, indicates that ADC module 0 input pin 11 is present.
10
ADC0AIN10
RO
1
ADC Module 0 AIN10 Pin Present
When set, indicates that ADC module 0 input pin 10 is present.
9
ADC0AIN9
RO
1
ADC Module 0 AIN9 Pin Present
When set, indicates that ADC module 0 input pin 9 is present.
8
ADC0AIN8
RO
1
ADC Module 0 AIN8 Pin Present
When set, indicates that ADC module 0 input pin 8 is present.
7
ADC0AIN7
RO
1
ADC Module 0 AIN7 Pin Present
When set, indicates that ADC module 0 input pin 7 is present.
6
ADC0AIN6
RO
1
ADC Module 0 AIN6 Pin Present
When set, indicates that ADC module 0 input pin 6 is present.
5
ADC0AIN5
RO
1
ADC Module 0 AIN5 Pin Present
When set, indicates that ADC module 0 input pin 5 is present.
4
ADC0AIN4
RO
1
ADC Module 0 AIN4 Pin Present
When set, indicates that ADC module 0 input pin 4 is present.
3
ADC0AIN3
RO
1
ADC Module 0 AIN3 Pin Present
When set, indicates that ADC module 0 input pin 3 is present.
2
ADC0AIN2
RO
1
ADC Module 0 AIN2 Pin Present
When set, indicates that ADC module 0 input pin 2 is present.
232
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
1
ADC0AIN1
RO
1
Description
ADC Module 0 AIN1 Pin Present
When set, indicates that ADC module 0 input pin 1 is present.
0
ADC0AIN0
RO
1
ADC Module 0 AIN0 Pin Present
When set, indicates that ADC module 0 input pin 0 is present.
July 25, 2011
233
Texas Instruments-Production Data
System Control
Register 25: Device Capabilities 9 ADC Digital Comparators (DC9), offset
0x190
This register is predefined by the part and can be used to verify features.
Device Capabilities 9 ADC Digital Comparators (DC9)
Base 0x400F.E000
Offset 0x190
Type RO, reset 0x00FF.00FF
31
30
29
28
27
26
25
24
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
ADC1DC7 ADC1DC6 ADC1DC5 ADC1DC4 ADC1DC3 ADC1DC2 ADC1DC1 ADC1DC0
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
7
6
5
4
3
2
1
0
ADC0DC7 ADC0DC6 ADC0DC5 ADC0DC4 ADC0DC3 ADC0DC2 ADC0DC1 ADC0DC0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
Bit/Field
Name
Type
Reset
Description
31:24
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
23
ADC1DC7
RO
1
ADC1 DC7 Present
When set, indicates that ADC module 1 Digital Comparator 7 is present.
22
ADC1DC6
RO
1
ADC1 DC6 Present
When set, indicates that ADC module 1 Digital Comparator 6 is present.
21
ADC1DC5
RO
1
ADC1 DC5 Present
When set, indicates that ADC module 1 Digital Comparator 5 is present.
20
ADC1DC4
RO
1
ADC1 DC4 Present
When set, indicates that ADC module 1 Digital Comparator 4 is present.
19
ADC1DC3
RO
1
ADC1 DC3 Present
When set, indicates that ADC module 1 Digital Comparator 3 is present.
18
ADC1DC2
RO
1
ADC1 DC2 Present
When set, indicates that ADC module 1 Digital Comparator 2 is present.
17
ADC1DC1
RO
1
ADC1 DC1 Present
When set, indicates that ADC module 1 Digital Comparator 1 is present.
16
ADC1DC0
RO
1
ADC1 DC0 Present
When set, indicates that ADC module 1 Digital Comparator 0 is present.
15:8
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7
ADC0DC7
RO
1
ADC0 DC7 Present
When set, indicates that ADC module 0 Digital Comparator 7 is present.
234
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
6
ADC0DC6
RO
1
Description
ADC0 DC6 Present
When set, indicates that ADC module 0 Digital Comparator 6 is present.
5
ADC0DC5
RO
1
ADC0 DC5 Present
When set, indicates that ADC module 0 Digital Comparator 5 is present.
4
ADC0DC4
RO
1
ADC0 DC4 Present
When set, indicates that ADC module 0 Digital Comparator 4 is present.
3
ADC0DC3
RO
1
ADC0 DC3 Present
When set, indicates that ADC module 0 Digital Comparator 3 is present.
2
ADC0DC2
RO
1
ADC0 DC2 Present
When set, indicates that ADC module 0 Digital Comparator 2 is present.
1
ADC0DC1
RO
1
ADC0 DC1 Present
When set, indicates that ADC module 0 Digital Comparator 1 is present.
0
ADC0DC0
RO
1
ADC0 DC0 Present
When set, indicates that ADC module 0 Digital Comparator 0 is present.
July 25, 2011
235
Texas Instruments-Production Data
System Control
Register 26: Non-Volatile Memory Information (NVMSTAT), offset 0x1A0
This register is predefined by the part and can be used to verify features.
Non-Volatile Memory Information (NVMSTAT)
Base 0x400F.E000
Offset 0x1A0
Type RO, reset 0x0000.0001
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
FWB
RO
1
Bit/Field
Name
Type
Reset
Description
31:1
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
FWB
RO
1
32 Word Flash Write Buffer Active
When set, indicates that the 32 word Flash memory write buffer feature
is active.
236
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 27: Run Mode Clock Gating Control Register 0 (RCGC0), offset 0x100
This register controls the clock gating logic in normal Run mode. Each bit controls a clock enable
for a given interface, function, or module. If set, the module receives a clock and functions. Otherwise,
the module is unclocked and disabled (saving power). If the module is unclocked, reads or writes
to the module generate a bus fault. The reset state of these bits is 0 (unclocked) unless otherwise
noted, so that all functional modules are disabled. It is the responsibility of software to enable the
ports necessary for the application. Note that these registers may contain more bits than there are
interfaces, functions, or modules to control. This configuration is implemented to assure reasonable
code compatibility with other family and future parts. RCGC0 is the clock configuration register for
running operation, SCGC0 for Sleep operation, and DCGC0 for Deep-Sleep operation. Setting the
ACG bit in the Run-Mode Clock Configuration (RCC) register specifies that the system uses sleep
modes.
Run Mode Clock Gating Control Register 0 (RCGC0)
Base 0x400F.E000
Offset 0x100
Type R/W, reset 0x00000040
31
30
29
reserved
Type
Reset
28
26
25
24
23
WDT1
22
21
20
19
18
16
ADC1
ADC0
RO
0
RO
0
R/W
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
reserved
17
RO
0
reserved
Type
Reset
27
MAXADC1SPD
MAXADC0SPD
R/W
0
R/W
0
R/W
0
R/W
0
reserved
HIB
RO
0
R/W
1
reserved
RO
0
RO
0
WDT0
R/W
0
reserved
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:29
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
28
WDT1
R/W
0
WDT1 Clock Gating Control
This bit controls the clock gating for the Watchdog Timer module 1. If
set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
27:18
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
17
ADC1
R/W
0
ADC1 Clock Gating Control
This bit controls the clock gating for SAR ADC module 1. If set, the
module receives a clock and functions. Otherwise, the module is
unclocked and disabled. If the module is unclocked, a read or write to
the module generates a bus fault.
16
ADC0
R/W
0
ADC0 Clock Gating Control
This bit controls the clock gating for ADC module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
July 25, 2011
237
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
Description
15:12
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
11:10
MAXADC1SPD
R/W
0
ADC1 Sample Speed
This field sets the rate at which ADC module 1 samples data. You cannot
set the rate higher than the maximum rate. You can set the sample rate
by setting the MAXADC1SPD bit as follows (all other encodings are
reserved):
Value Description
9:8
MAXADC0SPD
R/W
0
0x3
1M samples/second
0x2
500K samples/second
0x1
250K samples/second
0x0
125K samples/second
ADC0 Sample Speed
This field sets the rate at which ADC0 samples data. You cannot set
the rate higher than the maximum rate. You can set the sample rate by
setting the MAXADC0SPD bit as follows (all other encodings are reserved):
Value Description
0x3
1M samples/second
0x2
500K samples/second
0x1
250K samples/second
0x0
125K samples/second
7
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
6
HIB
R/W
1
HIB Clock Gating Control
This bit controls the clock gating for the Hibernation module. If set, the
module receives a clock and functions. Otherwise, the module is
unclocked and disabled. If the module is unclocked, a read or write to
the module generates a bus fault.
5:4
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
3
WDT0
R/W
0
WDT0 Clock Gating Control
This bit controls the clock gating for the Watchdog Timer module 0. If
set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
2:0
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
238
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 28: Sleep Mode Clock Gating Control Register 0 (SCGC0), offset
0x110
This register controls the clock gating logic in Sleep mode. Each bit controls a clock enable for a
given interface, function, or module. If set, the module receives a clock and functions. Otherwise,
the module is unclocked and disabled (saving power). If the module is unclocked, reads or writes
to the module generate a bus fault. The reset state of these bits is 0 (unclocked) unless otherwise
noted, so that all functional modules are disabled. It is the responsibility of software to enable the
ports necessary for the application. Note that these registers may contain more bits than there are
interfaces, functions, or modules to control. This configuration is implemented to assure reasonable
code compatibility with other family and future parts. RCGC0 is the clock configuration register for
running operation, SCGC0 for Sleep operation, and DCGC0 for Deep-Sleep operation. Setting the
ACG bit in the Run-Mode Clock Configuration (RCC) register specifies that the system uses sleep
modes.
Sleep Mode Clock Gating Control Register 0 (SCGC0)
Base 0x400F.E000
Offset 0x110
Type R/W, reset 0x00000040
31
30
29
reserved
Type
Reset
28
RO
0
RO
0
RO
0
R/W
0
15
14
13
12
reserved
Type
Reset
RO
0
RO
0
27
26
25
24
23
WDT1
RO
0
RO
0
22
21
20
19
18
reserved
RO
0
RO
0
11
10
RO
0
RO
0
9
8
MAXADC1SPD
MAXADC0SPD
R/W
0
R/W
0
R/W
0
R/W
0
RO
0
RO
0
RO
0
RO
0
5
4
7
6
reserved
HIB
RO
0
R/W
1
reserved
RO
0
RO
0
RO
0
RO
0
3
2
WDT0
R/W
0
17
16
ADC1
ADC0
R/W
0
R/W
0
1
0
reserved
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:29
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
28
WDT1
R/W
0
WDT1 Clock Gating Control
This bit controls the clock gating for Watchdog Timer module 1. If set,
the module receives a clock and functions. Otherwise, the module is
unclocked and disabled. If the module is unclocked, a read or write to
the module generates a bus fault.
27:18
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
17
ADC1
R/W
0
ADC1 Clock Gating Control
This bit controls the clock gating for ADC module 1. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
16
ADC0
R/W
0
ADC0 Clock Gating Control
This bit controls the clock gating for ADC module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
July 25, 2011
239
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
Description
15:12
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
11:10
MAXADC1SPD
R/W
0
ADC1 Sample Speed
This field sets the rate at which ADC module 1 samples data. You cannot
set the rate higher than the maximum rate. You can set the sample rate
by setting the MAXADC1SPD bit as follows (all other encodings are
reserved):
Value Description
9:8
MAXADC0SPD
R/W
0
0x3
1M samples/second
0x2
500K samples/second
0x1
250K samples/second
0x0
125K samples/second
ADC0 Sample Speed
This field sets the rate at which ADC module 0 samples data. You cannot
set the rate higher than the maximum rate. You can set the sample rate
by setting the MAXADC0SPD bit as follows (all other encodings are
reserved):
Value Description
0x3
1M samples/second
0x2
500K samples/second
0x1
250K samples/second
0x0
125K samples/second
7
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
6
HIB
R/W
1
HIB Clock Gating Control
This bit controls the clock gating for the Hibernation module. If set, the
module receives a clock and functions. Otherwise, the module is
unclocked and disabled. If the module is unclocked, a read or write to
the module generates a bus fault.
5:4
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
3
WDT0
R/W
0
WDT0 Clock Gating Control
This bit controls the clock gating for the Watchdog Timer module 0. If
set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
2:0
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
240
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 29: Deep Sleep Mode Clock Gating Control Register 0 (DCGC0),
offset 0x120
This register controls the clock gating logic in Deep-Sleep mode. Each bit controls a clock enable
for a given interface, function, or module. If set, the module receives a clock and functions. Otherwise,
the module is unclocked and disabled (saving power). If the module is unclocked, reads or writes
to the module generate a bus fault. The reset state of these bits is 0 (unclocked) unless otherwise
noted, so that all functional modules are disabled. It is the responsibility of software to enable the
ports necessary for the application. Note that these registers may contain more bits than there are
interfaces, functions, or modules to control. This configuration is implemented to assure reasonable
code compatibility with other family and future parts. RCGC0 is the clock configuration register for
running operation, SCGC0 for Sleep operation, and DCGC0 for Deep-Sleep operation. Setting the
ACG bit in the Run-Mode Clock Configuration (RCC) register specifies that the system uses sleep
modes.
Deep Sleep Mode Clock Gating Control Register 0 (DCGC0)
Base 0x400F.E000
Offset 0x120
Type R/W, reset 0x00000040
31
30
29
reserved
Type
Reset
28
27
26
25
24
23
WDT1
RO
0
RO
0
RO
0
R/W
0
15
14
13
12
RO
0
RO
0
RO
0
RO
0
RO
0
11
10
9
8
7
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
22
21
20
19
18
reserved
RO
0
RO
0
RO
0
6
5
4
HIB
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
1
reserved
RO
0
RO
0
RO
0
RO
0
3
2
WDT0
R/W
0
17
16
ADC1
ADC0
R/W
0
R/W
0
1
0
reserved
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:29
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
28
WDT1
R/W
0
WDT1 Clock Gating Control
This bit controls the clock gating for the Watchdog Timer module 1. If
set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
27:18
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
17
ADC1
R/W
0
ADC1 Clock Gating Control
This bit controls the clock gating for ADC module 1. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
16
ADC0
R/W
0
ADC0 Clock Gating Control
This bit controls the clock gating for ADC module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
July 25, 2011
241
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
Description
15:7
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
6
HIB
R/W
1
HIB Clock Gating Control
This bit controls the clock gating for the Hibernation module. If set, the
module receives a clock and functions. Otherwise, the module is
unclocked and disabled. If the module is unclocked, a read or write to
the module generates a bus fault.
5:4
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
3
WDT0
R/W
0
WDT0 Clock Gating Control
This bit controls the clock gating for the Watchdog Timer module 0. If
set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
2:0
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
242
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 30: Run Mode Clock Gating Control Register 1 (RCGC1), offset 0x104
This register controls the clock gating logic in normal Run mode. Each bit controls a clock enable
for a given interface, function, or module. If set, the module receives a clock and functions. Otherwise,
the module is unclocked and disabled (saving power). If the module is unclocked, reads or writes
to the module generate a bus fault. The reset state of these bits is 0 (unclocked) unless otherwise
noted, so that all functional modules are disabled. It is the responsibility of software to enable the
ports necessary for the application. Note that these registers may contain more bits than there are
interfaces, functions, or modules to control. This configuration is implemented to assure reasonable
code compatibility with other family and future parts. RCGC1 is the clock configuration register for
running operation, SCGC1 for Sleep operation, and DCGC1 for Deep-Sleep operation. Setting the
ACG bit in the Run-Mode Clock Configuration (RCC) register specifies that the system uses sleep
modes.
Run Mode Clock Gating Control Register 1 (RCGC1)
Base 0x400F.E000
Offset 0x104
Type R/W, reset 0x00000000
31
30
29
28
27
26
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
reserved
I2C1
reserved
I2C0
RO
0
R/W
0
RO
0
R/W
0
RO
0
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
TIMER3
TIMER2
TIMER1
TIMER0
R/W
0
R/W
0
R/W
0
R/W
0
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
SSI1
SSI0
reserved
UART2
UART1
UART0
R/W
0
R/W
0
RO
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
Type
Reset
reserved
Bit/Field
Name
Type
Reset
Description
31:20
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
19
TIMER3
R/W
0
Timer 3 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 3.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
18
TIMER2
R/W
0
Timer 2 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 2.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
17
TIMER1
R/W
0
Timer 1 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 1.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
16
TIMER0
R/W
0
Timer 0 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 0.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
July 25, 2011
243
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
Description
15
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
14
I2C1
R/W
0
I2C1 Clock Gating Control
This bit controls the clock gating for I2C module 1. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
13
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
12
I2C0
R/W
0
I2C0 Clock Gating Control
This bit controls the clock gating for I2C module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
11:6
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
5
SSI1
R/W
0
SSI1 Clock Gating Control
This bit controls the clock gating for SSI module 1. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
4
SSI0
R/W
0
SSI0 Clock Gating Control
This bit controls the clock gating for SSI module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
3
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
2
UART2
R/W
0
UART2 Clock Gating Control
This bit controls the clock gating for UART module 2. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
1
UART1
R/W
0
UART1 Clock Gating Control
This bit controls the clock gating for UART module 1. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
0
UART0
R/W
0
UART0 Clock Gating Control
This bit controls the clock gating for UART module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
244
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 31: Sleep Mode Clock Gating Control Register 1 (SCGC1), offset
0x114
This register controls the clock gating logic in Sleep mode. Each bit controls a clock enable for a
given interface, function, or module. If set, the module receives a clock and functions. Otherwise,
the module is unclocked and disabled (saving power). If the module is unclocked, reads or writes
to the module generate a bus fault. The reset state of these bits is 0 (unclocked) unless otherwise
noted, so that all functional modules are disabled. It is the responsibility of software to enable the
ports necessary for the application. Note that these registers may contain more bits than there are
interfaces, functions, or modules to control. This configuration is implemented to assure reasonable
code compatibility with other family and future parts. RCGC1 is the clock configuration register for
running operation, SCGC1 for Sleep operation, and DCGC1 for Deep-Sleep operation. Setting the
ACG bit in the Run-Mode Clock Configuration (RCC) register specifies that the system uses sleep
modes.
Sleep Mode Clock Gating Control Register 1 (SCGC1)
Base 0x400F.E000
Offset 0x114
Type R/W, reset 0x00000000
31
30
29
28
27
26
25
24
23
22
21
20
reserved
Type
Reset
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
11
10
9
8
7
6
15
14
13
12
reserved
I2C1
reserved
I2C0
RO
0
R/W
0
RO
0
R/W
0
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
19
18
17
16
TIMER3
TIMER2
TIMER1
TIMER0
R/W
0
R/W
0
R/W
0
R/W
0
5
4
3
2
1
0
SSI1
SSI0
reserved
UART2
UART1
UART0
R/W
0
R/W
0
RO
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:20
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
19
TIMER3
R/W
0
Timer 3 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 3.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
18
TIMER2
R/W
0
Timer 2 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 2.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
17
TIMER1
R/W
0
Timer 1 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 1.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
July 25, 2011
245
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
16
TIMER0
R/W
0
Description
Timer 0 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 0.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
15
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
14
I2C1
R/W
0
I2C1 Clock Gating Control
This bit controls the clock gating for I2C module 1. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
13
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
12
I2C0
R/W
0
I2C0 Clock Gating Control
This bit controls the clock gating for I2C module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
11:6
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
5
SSI1
R/W
0
SSI1 Clock Gating Control
This bit controls the clock gating for SSI module 1. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
4
SSI0
R/W
0
SSI0 Clock Gating Control
This bit controls the clock gating for SSI module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
3
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
2
UART2
R/W
0
UART2 Clock Gating Control
This bit controls the clock gating for UART module 2. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
1
UART1
R/W
0
UART1 Clock Gating Control
This bit controls the clock gating for UART module 1. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
246
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
0
UART0
R/W
0
Description
UART0 Clock Gating Control
This bit controls the clock gating for UART module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
July 25, 2011
247
Texas Instruments-Production Data
System Control
Register 32: Deep-Sleep Mode Clock Gating Control Register 1 (DCGC1),
offset 0x124
This register controls the clock gating logic in Deep-Sleep mode. Each bit controls a clock enable
for a given interface, function, or module. If set, the module receives a clock and functions. Otherwise,
the module is unclocked and disabled (saving power). If the module is unclocked, reads or writes
to the module generate a bus fault. The reset state of these bits is 0 (unclocked) unless otherwise
noted, so that all functional modules are disabled. It is the responsibility of software to enable the
ports necessary for the application. Note that these registers may contain more bits than there are
interfaces, functions, or modules to control. This configuration is implemented to assure reasonable
code compatibility with other family and future parts. RCGC1 is the clock configuration register for
running operation, SCGC1 for Sleep operation, and DCGC1 for Deep-Sleep operation. Setting the
ACG bit in the Run-Mode Clock Configuration (RCC) register specifies that the system uses sleep
modes.
Deep-Sleep Mode Clock Gating Control Register 1 (DCGC1)
Base 0x400F.E000
Offset 0x124
Type R/W, reset 0x00000000
31
30
29
28
27
26
25
24
23
22
21
20
reserved
Type
Reset
RO
0
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
11
10
9
8
7
6
15
14
13
12
reserved
I2C1
reserved
I2C0
RO
0
R/W
0
RO
0
R/W
0
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
19
18
17
16
TIMER3
TIMER2
TIMER1
TIMER0
R/W
0
R/W
0
R/W
0
R/W
0
5
4
3
2
1
0
SSI1
SSI0
reserved
UART2
UART1
UART0
R/W
0
R/W
0
RO
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:20
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
19
TIMER3
R/W
0
Timer 3 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 3.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
18
TIMER2
R/W
0
Timer 2 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 2.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
17
TIMER1
R/W
0
Timer 1 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 1.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
248
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
16
TIMER0
R/W
0
Description
Timer 0 Clock Gating Control
This bit controls the clock gating for General-Purpose Timer module 0.
If set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
15
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
14
I2C1
R/W
0
I2C1 Clock Gating Control
This bit controls the clock gating for I2C module 1. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
13
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
12
I2C0
R/W
0
I2C0 Clock Gating Control
This bit controls the clock gating for I2C module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
11:6
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
5
SSI1
R/W
0
SSI1 Clock Gating Control
This bit controls the clock gating for SSI module 1. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
4
SSI0
R/W
0
SSI0 Clock Gating Control
This bit controls the clock gating for SSI module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
3
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
2
UART2
R/W
0
UART2 Clock Gating Control
This bit controls the clock gating for UART module 2. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
1
UART1
R/W
0
UART1 Clock Gating Control
This bit controls the clock gating for UART module 1. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
July 25, 2011
249
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
0
UART0
R/W
0
Description
UART0 Clock Gating Control
This bit controls the clock gating for UART module 0. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
250
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 33: Run Mode Clock Gating Control Register 2 (RCGC2), offset 0x108
This register controls the clock gating logic in normal Run mode. Each bit controls a clock enable
for a given interface, function, or module. If set, the module receives a clock and functions. Otherwise,
the module is unclocked and disabled (saving power). If the module is unclocked, reads or writes
to the module generate a bus fault. The reset state of these bits is 0 (unclocked) unless otherwise
noted, so that all functional modules are disabled. It is the responsibility of software to enable the
ports necessary for the application. Note that these registers may contain more bits than there are
interfaces, functions, or modules to control. This configuration is implemented to assure reasonable
code compatibility with other family and future parts. RCGC2 is the clock configuration register for
running operation, SCGC2 for Sleep operation, and DCGC2 for Deep-Sleep operation. Setting the
ACG bit in the Run-Mode Clock Configuration (RCC) register specifies that the system uses sleep
modes.
Run Mode Clock Gating Control Register 2 (RCGC2)
Base 0x400F.E000
Offset 0x108
Type R/W, reset 0x00000000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
GPIOH
GPIOG
GPIOF
GPIOE
GPIOD
GPIOC
GPIOB
GPIOA
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
RO
0
UDMA
R/W
0
reserved
RO
0
Bit/Field
Name
Type
Reset
Description
31:14
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
13
UDMA
R/W
0
Micro-DMA Clock Gating Control
This bit controls the clock gating for micro-DMA. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
12:8
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7
GPIOH
R/W
0
Port H Clock Gating Control
This bit controls the clock gating for Port H. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
6
GPIOG
R/W
0
Port G Clock Gating Control
This bit controls the clock gating for Port G. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
July 25, 2011
251
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
5
GPIOF
R/W
0
Description
Port F Clock Gating Control
This bit controls the clock gating for Port F. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
4
GPIOE
R/W
0
Port E Clock Gating Control
Port E Clock Gating Control. This bit controls the clock gating for Port
E. If set, the module receives a clock and functions. Otherwise, the
module is unclocked and disabled. If the module is unclocked, a read
or write to the module generates a bus fault.
3
GPIOD
R/W
0
Port D Clock Gating Control
Port D Clock Gating Control. This bit controls the clock gating for Port
D. If set, the module receives a clock and functions. Otherwise, the
module is unclocked and disabled. If the module is unclocked, a read
or write to the module generates a bus fault.
2
GPIOC
R/W
0
Port C Clock Gating Control
This bit controls the clock gating for Port C. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
1
GPIOB
R/W
0
Port B Clock Gating Control
This bit controls the clock gating for Port B. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
0
GPIOA
R/W
0
Port A Clock Gating Control
This bit controls the clock gating for Port A. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
252
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 34: Sleep Mode Clock Gating Control Register 2 (SCGC2), offset
0x118
This register controls the clock gating logic in Sleep mode. Each bit controls a clock enable for a
given interface, function, or module. If set, the module receives a clock and functions. Otherwise,
the module is unclocked and disabled (saving power). If the module is unclocked, reads or writes
to the module generate a bus fault. The reset state of these bits is 0 (unclocked) unless otherwise
noted, so that all functional modules are disabled. It is the responsibility of software to enable the
ports necessary for the application. Note that these registers may contain more bits than there are
interfaces, functions, or modules to control. This configuration is implemented to assure reasonable
code compatibility with other family and future parts. RCGC2 is the clock configuration register for
running operation, SCGC2 for Sleep operation, and DCGC2 for Deep-Sleep operation. Setting the
ACG bit in the Run-Mode Clock Configuration (RCC) register specifies that the system uses sleep
modes.
Sleep Mode Clock Gating Control Register 2 (SCGC2)
Base 0x400F.E000
Offset 0x118
Type R/W, reset 0x00000000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
15
14
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
13
12
11
UDMA
R/W
0
RO
0
RO
0
RO
0
10
9
8
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
GPIOH
GPIOG
GPIOF
GPIOE
GPIOD
GPIOC
GPIOB
GPIOA
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:14
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
13
UDMA
R/W
0
Micro-DMA Clock Gating Control
This bit controls the clock gating for micro-DMA. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
12:8
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7
GPIOH
R/W
0
Port H Clock Gating Control
This bit controls the clock gating for Port H. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
6
GPIOG
R/W
0
Port G Clock Gating Control
This bit controls the clock gating for Port G. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
July 25, 2011
253
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
5
GPIOF
R/W
0
Description
Port F Clock Gating Control
This bit controls the clock gating for Port F. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
4
GPIOE
R/W
0
Port E Clock Gating Control
Port E Clock Gating Control. This bit controls the clock gating for Port
E. If set, the module receives a clock and functions. Otherwise, the
module is unclocked and disabled. If the module is unclocked, a read
or write to the module generates a bus fault.
3
GPIOD
R/W
0
Port D Clock Gating Control
Port D Clock Gating Control. This bit controls the clock gating for Port
D. If set, the module receives a clock and functions. Otherwise, the
module is unclocked and disabled. If the module is unclocked, a read
or write to the module generates a bus fault.
2
GPIOC
R/W
0
Port C Clock Gating Control
This bit controls the clock gating for Port C. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
1
GPIOB
R/W
0
Port B Clock Gating Control
This bit controls the clock gating for Port B. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
0
GPIOA
R/W
0
Port A Clock Gating Control
This bit controls the clock gating for Port A. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
254
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 35: Deep Sleep Mode Clock Gating Control Register 2 (DCGC2),
offset 0x128
This register controls the clock gating logic in Deep-Sleep mode. Each bit controls a clock enable
for a given interface, function, or module. If set, the module receives a clock and functions. Otherwise,
the module is unclocked and disabled (saving power). If the module is unclocked, reads or writes
to the module generate a bus fault. The reset state of these bits is 0 (unclocked) unless otherwise
noted, so that all functional modules are disabled. It is the responsibility of software to enable the
ports necessary for the application. Note that these registers may contain more bits than there are
interfaces, functions, or modules to control. This configuration is implemented to assure reasonable
code compatibility with other family and future parts. RCGC2 is the clock configuration register for
running operation, SCGC2 for Sleep operation, and DCGC2 for Deep-Sleep operation. Setting the
ACG bit in the Run-Mode Clock Configuration (RCC) register specifies that the system uses sleep
modes.
Deep Sleep Mode Clock Gating Control Register 2 (DCGC2)
Base 0x400F.E000
Offset 0x128
Type R/W, reset 0x00000000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
15
14
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
13
12
11
UDMA
R/W
0
RO
0
RO
0
RO
0
10
9
8
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
GPIOH
GPIOG
GPIOF
GPIOE
GPIOD
GPIOC
GPIOB
GPIOA
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:14
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
13
UDMA
R/W
0
Micro-DMA Clock Gating Control
This bit controls the clock gating for micro-DMA. If set, the module
receives a clock and functions. Otherwise, the module is unclocked and
disabled. If the module is unclocked, a read or write to the module
generates a bus fault.
12:8
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7
GPIOH
R/W
0
Port H Clock Gating Control
This bit controls the clock gating for Port H. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
6
GPIOG
R/W
0
Port G Clock Gating Control
This bit controls the clock gating for Port G. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
July 25, 2011
255
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
5
GPIOF
R/W
0
Description
Port F Clock Gating Control
This bit controls the clock gating for Port F. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
4
GPIOE
R/W
0
Port E Clock Gating Control
Port E Clock Gating Control. This bit controls the clock gating for Port
E. If set, the module receives a clock and functions. Otherwise, the
module is unclocked and disabled. If the module is unclocked, a read
or write to the module generates a bus fault.
3
GPIOD
R/W
0
Port D Clock Gating Control
Port D Clock Gating Control. This bit controls the clock gating for Port
D. If set, the module receives a clock and functions. Otherwise, the
module is unclocked and disabled. If the module is unclocked, a read
or write to the module generates a bus fault.
2
GPIOC
R/W
0
Port C Clock Gating Control
This bit controls the clock gating for Port C. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
1
GPIOB
R/W
0
Port B Clock Gating Control
This bit controls the clock gating for Port B. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
0
GPIOA
R/W
0
Port A Clock Gating Control
This bit controls the clock gating for Port A. If set, the module receives
a clock and functions. Otherwise, the module is unclocked and disabled.
If the module is unclocked, a read or write to the module generates a
bus fault.
256
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 36: Software Reset Control 0 (SRCR0), offset 0x040
This register allows individual modules to be reset. Writes to this register are masked by the bits in
the Device Capabilities 1 (DC1) register.
Software Reset Control 0 (SRCR0)
Base 0x400F.E000
Offset 0x040
Type R/W, reset 0x00000000
31
30
29
28
reserved
Type
Reset
27
26
25
24
23
WDT1
21
20
19
18
reserved
17
16
ADC1
ADC0
RO
0
RO
0
RO
0
R/W
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
reserved
Type
Reset
22
HIB
RO
0
reserved
RO
0
RO
0
WDT0
R/W
0
reserved
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:29
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
28
WDT1
R/W
0
WDT1 Reset Control
When this bit is set, Watchdog Timer module 1 is reset. All internal data
is lost and the registers are returned to their reset states. This bit must
be manually cleared after being set.
27:18
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
17
ADC1
R/W
0
ADC1 Reset Control
When this bit is set, ADC module 1 is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
16
ADC0
R/W
0
ADC0 Reset Control
When this bit is set, ADC module 0 is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
15:7
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
6
HIB
R/W
0
HIB Reset Control
When this bit is set, the Hibernation module is reset. All internal data is
lost and the registers are returned to their reset states.This bit must be
manually cleared after being set.
5:4
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
257
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
3
WDT0
R/W
0
Description
WDT0 Reset Control
When this bit is set, Watchdog Timer module 0 is reset. All internal data
is lost and the registers are returned to their reset states. This bit must
be manually cleared after being set.
2:0
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
258
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 37: Software Reset Control 1 (SRCR1), offset 0x044
This register allows individual modules to be reset. Writes to this register are masked by the bits in
the Device Capabilities 2 (DC2) register.
Software Reset Control 1 (SRCR1)
Base 0x400F.E000
Offset 0x044
Type R/W, reset 0x00000000
31
30
29
28
27
26
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
reserved
I2C1
reserved
I2C0
RO
0
R/W
0
RO
0
R/W
0
RO
0
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
TIMER3
TIMER2
TIMER1
TIMER0
R/W
0
R/W
0
R/W
0
R/W
0
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
SSI1
SSI0
reserved
UART2
UART1
UART0
R/W
0
R/W
0
RO
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
Type
Reset
reserved
Bit/Field
Name
Type
Reset
Description
31:20
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
19
TIMER3
R/W
0
Timer 3 Reset Control
Timer 3 Reset Control. When this bit is set, General-Purpose Timer
module 3 is reset. All internal data is lost and the registers are returned
to their reset states. This bit must be manually cleared after being set.
18
TIMER2
R/W
0
Timer 2 Reset Control
When this bit is set, General-Purpose Timer module 2 is reset. All internal
data is lost and the registers are returned to their reset states. This bit
must be manually cleared after being set.
17
TIMER1
R/W
0
Timer 1 Reset Control
When this bit is set, General-Purpose Timer module 1 is reset. All internal
data is lost and the registers are returned to their reset states. This bit
must be manually cleared after being set.
16
TIMER0
R/W
0
Timer 0 Reset Control
When this bit is set, General-Purpose Timer module 0 is reset. All internal
data is lost and the registers are returned to their reset states. This bit
must be manually cleared after being set.
15
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
14
I2C1
R/W
0
I2C1 Reset Control
When this bit is set, I2C module 1 is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
13
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
259
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
12
I2C0
R/W
0
Description
I2C0 Reset Control
When this bit is set, I2C module 0 is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
11:6
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
5
SSI1
R/W
0
SSI1 Reset Control
When this bit is set, SSI module 1 is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
4
SSI0
R/W
0
SSI0 Reset Control
When this bit is set, SSI module 0 is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
3
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
2
UART2
R/W
0
UART2 Reset Control
When this bit is set, UART module 2 is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
1
UART1
R/W
0
UART1 Reset Control
When this bit is set, UART module 1 is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
0
UART0
R/W
0
UART0 Reset Control
When this bit is set, UART module 0 is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
260
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 38: Software Reset Control 2 (SRCR2), offset 0x048
This register allows individual modules to be reset. Writes to this register are masked by the bits in
the Device Capabilities 4 (DC4) register.
Software Reset Control 2 (SRCR2)
Base 0x400F.E000
Offset 0x048
Type R/W, reset 0x00000000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
GPIOH
GPIOG
GPIOF
GPIOE
GPIOD
GPIOC
GPIOB
GPIOA
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
RO
0
UDMA
R/W
0
reserved
RO
0
Bit/Field
Name
Type
Reset
Description
31:14
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
13
UDMA
R/W
0
Micro-DMA Reset Control
When this bit is set, uDMA module is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
12:8
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7
GPIOH
R/W
0
Port H Reset Control
When this bit is set, Port H module is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
6
GPIOG
R/W
0
Port G Reset Control
When this bit is set, Port G module is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
5
GPIOF
R/W
0
Port F Reset Control
When this bit is set, Port F module is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
4
GPIOE
R/W
0
Port E Reset Control
When this bit is set, Port E module is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
3
GPIOD
R/W
0
Port D Reset Control
When this bit is set, Port D module is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
July 25, 2011
261
Texas Instruments-Production Data
System Control
Bit/Field
Name
Type
Reset
2
GPIOC
R/W
0
Description
Port C Reset Control
When this bit is set, Port C module is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
1
GPIOB
R/W
0
Port B Reset Control
When this bit is set, Port B module is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
0
GPIOA
R/W
0
Port A Reset Control
When this bit is set, Port A module is reset. All internal data is lost and
the registers are returned to their reset states. This bit must be manually
cleared after being set.
262
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
6
Hibernation Module
The Hibernation Module manages removal and restoration of power to provide a means for reducing
power consumption. When the processor and peripherals are idle, power can be completely removed
with only the Hibernation module remaining powered. Power can be restored based on an external
signal or at a certain time using the built-in Real-Time Clock (RTC). The Hibernation module can
be independently supplied from a battery or an auxiliary power supply.
The Hibernation module has the following features:
■ 32-bit real-time counter (RTC)
– Two 32-bit RTC match registers for timed wake-up and interrupt generation
– RTC predivider trim for making fine adjustments to the clock rate
■ Two mechanisms for power control
– System power control using discrete external regulator
– On-chip power control using internal switches under register control
■ Dedicated pin for waking using an external signal
■ RTC operational and hibernation memory valid as long as VBAT is valid
■ Low-battery detection, signaling, and interrupt generation
■ Clock source from a 32.768-kHz external oscillator or a 4.194304-MHz crystal; 32.768-kHz
external oscillator can be used for main controller clock
■ 64 32-bit words of non-volatile memory to save state during hibernation
■ Programmable interrupts for RTC match, external wake, and low battery events
July 25, 2011
263
Texas Instruments-Production Data
Hibernation Module
6.1
Block Diagram
Figure 6-1. Hibernation Module Block Diagram
HIBCTL.CLK32EN
XOSC0
Interrupts
HIBIM
HIBRIS
HIBMIS
HIBIC
Pre-Divider
XOSC1
HIBRTCT
/128
HIBCTL.CLKSEL
RTC
HIBRTCC
HIBRTCLD
HIBRTCM0
HIBRTCM1
Non-Volatile
Memory
64 words
HIBDATA
Clock Source for
System Clock
Interrupts
to CPU
MATCH0/1
HIBCTL.RTCEN
WAKE
LOWBAT
Power
Sequence
Logic
Low Battery
Detect
VBAT
HIBCTL.LOWBATEN
HIB
HIBCTL.PWRCUT
HIBCTL.RTCWEN
HIBCTL.EXTWEN
HIBCTL.VABORT
HIBCTL.HIBREQ
6.2
Signal Description
The following table lists the external signals of the Hibernation module and describes the function
of each. These signals have dedicated functions and are not alternate functions for any GPIO signals.
Table 6-1. Signals for Hibernate (100LQFP)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
HIB
51
fixed
O
OD
An output that indicates the processor is in
Hibernate mode.
VBAT
55
fixed
-
Power
Power source for the Hibernation module. It is
normally connected to the positive terminal of a
battery and serves as the battery
backup/Hibernation module power-source supply.
WAKE
50
fixed
I
TTL
An external input that brings the processor out of
Hibernate mode when asserted.
XOSC0
52
fixed
I
Analog
Hibernation module oscillator crystal input or an
external clock reference input. Note that this is
either a 4.194304-MHz crystal or a 32.768-kHz
oscillator for the Hibernation module RTC. See the
CLKSEL bit in the HIBCTL register.
XOSC1
53
fixed
O
Analog
Hibernation module oscillator crystal output. Leave
unconnected when using a single-ended clock
source.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
264
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 6-2. Signals for Hibernate (108BGA)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
HIB
M12
fixed
O
OD
An output that indicates the processor is in
Hibernate mode.
VBAT
L12
fixed
-
Power
Power source for the Hibernation module. It is
normally connected to the positive terminal of a
battery and serves as the battery
backup/Hibernation module power-source supply.
WAKE
M10
fixed
I
TTL
An external input that brings the processor out of
Hibernate mode when asserted.
XOSC0
K11
fixed
I
Analog
Hibernation module oscillator crystal input or an
external clock reference input. Note that this is
either a 4.194304-MHz crystal or a 32.768-kHz
oscillator for the Hibernation module RTC. See the
CLKSEL bit in the HIBCTL register.
XOSC1
K12
fixed
O
Analog
Hibernation module oscillator crystal output. Leave
unconnected when using a single-ended clock
source.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
6.3
Functional Description
Important: The Hibernate module must have either the RTC function or the External Wake function
enabled to ensure proper operation of the microcontroller. See “Initialization” on page 270.
The Hibernation module provides two mechanisms for power control:
■ The first mechanism controls the power to the microcontroller with a control signal (HIB) that
signals an external voltage regulator to turn on or off.
■ The second mechanism uses internal switches to control power to the Cortex-M3 as well as to
most analog and digital functions while retaining I/O pin power (VDD3ON mode).
The Hibernation module power source is determined dynamically. The supply voltage of the
Hibernation module is the larger of the main voltage source (VDD) or the battery/auxilliary voltage
source (VBAT). The Hibernation module also has an independent clock source to maintain a real-time
clock (RTC) when the system clock is powered down. Once in hibernation, the module signals an
external voltage regulator to turn the power back on when an external pin (WAKE) is asserted or
when the internal RTC reaches a certain value. The Hibernation module can also detect when the
battery voltage is low and optionally prevent hibernation when this occurs.
When waking from hibernation, the HIB signal is deasserted. The return of VDD causes a POR to
be executed. The time from when the WAKE signal is asserted to when code begins execution is
equal to the wake-up time (tWAKE_TO_HIB) plus the power-on reset time (TIRPOR).
6.3.1
Register Access Timing
Because the Hibernation module has an independent clocking domain, certain registers must be
written only with a timing gap between accesses. The delay time is tHIB_REG_ACCESS, therefore
software must guarantee that this delay is inserted between back-to-back writes to certain Hibernation
registers or between a write followed by a read to those same registers. Software may make use
of the WRC bit in the Hibernation Control (HIBCTL) register to ensure that the required timing gap
has elapsed. This bit is cleared on a write operation and set once the write completes, indicating to
July 25, 2011
265
Texas Instruments-Production Data
Hibernation Module
software that another write or read may be started safely. Software should poll HIBCTL for WRC=1
prior to accessing any affected register. The following registers are subject to this timing restriction:
■ Hibernation RTC Counter (HIBRTCC)
■ Hibernation RTC Match 0 (HIBRTCM0)
■ Hibernation RTC Match 1 (HIBRTCM1)
■ Hibernation RTC Load (HIBRTCLD)
■ Hibernation RTC Trim (HIBRTCT)
■ Hibernation Data (HIBDATA)
Back-to-back reads from Hibernation module registers have no timing restrictions. Reads are
performed at the full peripheral clock rate.
6.3.2
Hibernation Clock Source
In systems where the Hibernation module is used to put the microcontroller into hibernation, the
module must be clocked by an external source that is independent from the main system clock,
even if the RTC feature is not used. An external oscillator or crystal is used for this purpose. To use
a crystal, a 4.194304-MHz crystal is connected to the XOSC0 and XOSC1 pins. This clock signal is
divided by 128 internally to produce a 32.768-kHz Hibernation clock reference. Alternatively, a
32.768-kHz oscillator can be connected to the XOSC0 pin, leaving XOSC1 unconnected. Care must
be taken that the voltage amplitude of the 32.768-kHz oscillator is less than VBAT, otherwise, the
Hibernation module may draw power from the oscillator and not VBAT during hibernation. See Figure
6-2 on page 267 and Figure 6-3 on page 267. Note that these diagrams only show the connection to
the Hibernation pins and not to the full system. See “Hibernation Module” on page 793 for specific
values.
The Hibernation clock source is enabled by setting the CLK32EN bit of the HIBCTL register. The
type of clock source is selected by clearing the CLKSEL bit for a 4.194304-MHz crystal and setting
the CLKSEL bit for a 32.768-kHz oscillator. If a crystal is used for the clock source, the software
must leave a delay of tHIBOSC_START after writing to the CLK32EN bit and before any other accesses
to the Hibernation module registers. The delay allows the crystal to power up and stabilize. If an
oscillator is used for the clock source, no delay is needed.
266
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 6-2. Using a Crystal as the Hibernation Clock Source
Stellaris® Microcontroller
Regulator
or Switch
Input
Voltage
IN
OUT
VDD
EN
XOSC0
X1
RL
XOSC1
C1
C2
HIB
WAKE
RPU1
Open drain
external wake
up circuit
Note:
VBAT
GND
3V
Battery
RPU2
X1 = Crystal frequency is fXOSC_XTAL.
C1,2 = Capacitor value derived from crystal vendor load capacitance specifications.
RL = Load resistor is RXOSC_LOAD.
RPU1 = Pull-up resistor 1 (value and voltage source (VBAT or Input Voltage) determined by regulator
or switch enable input characteristics).
RPU2 = Pull-up resistor 2 is 200 kΩ
See “Hibernation Module” on page 793 for specific parameter values.
Figure 6-3. Using a Dedicated Oscillator as the Hibernation Clock Source with VDD3ON Mode
Stellaris® Microcontroller
Regulator
Input
Voltage
IN
OUT
VDD
Clock
Source
XOSC0
(fEXT_OSC)
N.C.
XOSC1
HIB
WAKE
Open drain
external wake
up circuit
Note:
VBAT
GND
RPU
3V
Battery
RPU = Pull-up resistor is 1 MΩ
If the application does not require the use of the Hibernation module, refer to “Connections for
Unused Signals” on page 782 for more information on how to connect the unused signals. In this
situation, the HIB bit in the Run Mode Clock Gating Control Register 0 (RCGC0) register must
be cleared, disabling the system clock to the Hibernation module and Hibernation module registers
are not accessible.
July 25, 2011
267
Texas Instruments-Production Data
Hibernation Module
6.3.3
Battery Management
Important: System-level factors may affect the accuracy of the low battery detect circuit. The
designer should consider battery type, discharge characteristics, and a test load during
battery voltage measurements.
The Hibernation module can be independently powered by a battery or an auxiliary power source.
The module can monitor the voltage level of the battery and detect when the voltage drops below
VLOWBAT. The module can also be configured so that it does not go into Hibernate mode if the battery
voltage drops below this threshold. Battery voltage is not measured while in Hibernate mode.
The Hibernation module can be configured to detect a low battery condition by setting the LOWBATEN
bit of the HIBCTL register. In this configuration, the LOWBAT bit of the Hibernation Raw Interrupt
Status (HIBRIS) register is set when the battery level is low. If the VABORT bit in the HIBCTL register
is also set, then the module is prevented from entering Hibernation mode when a low battery is
detected. The module can also be configured to generate an interrupt for the low-battery condition
(see “Interrupts and Status” on page 269).
Note that the Hibernation module draws power from whichever source (VBAT or VDD) has the higher
voltage. Therefore, it is important to design the circuit to ensure that VDD is higher that VBAT under
nominal conditions or else the Hibernation module draws power from the battery even when VDD is
available.
6.3.4
Real-Time Clock
The Hibernation module includes a 32-bit counter that increments once per second with the proper
configuration (see “Hibernation Clock Source” on page 266). The 32.768-kHz clock signal, either
directly from the 32.768-kHz oscillator or from the 4.194304-MHz crystal divided by 128, is fed into
a predivider register that counts down the 32.768-kHz clock ticks to achieve a once per second
clock rate for the RTC. The rate can be adjusted to compensate for inaccuracies in the clock source
by using the predivider trim register, HIBRTCT. This register has a nominal value of 0x7FFF, and
is used for one second out of every 64 seconds to divide the input clock. This configuration allows
the software to make fine corrections to the clock rate by adjusting the predivider trim register up
or down from 0x7FFF. The predivider trim should be adjusted up from 0x7FFF in order to slow down
the RTC rate and down from 0x7FFF in order to speed up the RTC rate.
The Hibernation module includes two 32-bit match registers that are compared to the value of the
RTC counter. The match registers can be used to wake the processor from Hibernation mode or to
generate an interrupt to the processor if it is not in hibernation.
The RTC must be enabled with the RTCEN bit of the HIBCTL register. The value of the RTC can be
set at any time by writing to the HIBRTCLD register. The predivider trim can be adjusted by reading
and writing the HIBRTCT register. The predivider uses this register once every 64 seconds to adjust
the clock rate. The two match registers can be set by writing to the HIBRTCM0 and HIBRTCM1
registers. The RTC can be configured to generate interrupts by using the interrupt registers (see
“Interrupts and Status” on page 269).
6.3.5
Non-Volatile Memory
The Hibernation module contains 64 32-bit words of memory that are powered from the battery or
auxiliary power supply and therefore retained during hibernation. The processor software can save
state information in this memory prior to hibernation and recover the state upon waking. The
non-volatile memory can be accessed through the HIBDATA registers.
268
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
6.3.6
Power Control Using HIB
Important: The Hibernation Module requires special system implementation considerations when
using HIB to control power, as it is intended to power-down all other sections of the
microcontroller. All system signals and power supplies that connect to the chip must
be driven to 0 VDC or powered down with the same regulator controlled by HIB. See
“Hibernation Module” on page 793 for more details.
The Hibernation module controls power to the microcontroller through the use of the HIB pin which
is intended to be connected to the enable signal of the external regulator(s) providing 3.3 V to the
microcontroller and other circuits. When the HIB signal is asserted by the Hibernation module, the
external regulator is turned off and no longer powers the microcontroller and any parts of the system
that are powered by the regulator. The Hibernation module remains powered from the VBAT supply
(which could be a battery or an auxiliary power source) until a Wake event. Power to the
microcontroller is restored by deasserting the HIB signal, which causes the external regulator to
turn power back on to the chip.
6.3.7
Power Control Using VDD3ON Mode
The Hibernation module may also be configured to cut power to all internal modules. While in this
state, all pins are configured as inputs. In the VDD3ON mode, the regulator should maintain 3.3 V
power to the microcontroller during Hibernate. This power control mode is enabled by setting the
VDD3ON bit in HIBCTL.
6.3.8
Initiating Hibernate
Prior to initiating hibernation, a wake-up condition must be configured, either from the external WAKE
pin, or by using an RTC match. Hibernation mode is initiated when the HIBREQ bit of the HIBCTL
register is set. If a Flash memory write operation is in progress, an interlock feature holds off the
transition into Hibernation mode until the write has completed.
The Hibernation module is configured to wake from the external WAKE pin by setting the PINWEN
bit of the HIBCTL register. It is configured to wake from RTC match by setting the RTCWEN bit. Either
one or both of these bits must be set prior to going into hibernation. Note that the WAKE pin uses
the Hibernation module's internal power supply as the logic 1 reference.
Upon either external wake-up or RTC match, the Hibernation module delays coming out of hibernation
until VDD is above the minimum specified voltage, see Table 19-2 on page 785.
When the Hibernation module wakes, the microcontroller performs a normal power-on reset. Software
can detect that the power-on was due to a wake from hibernation by examining the raw interrupt
status register (see “Interrupts and Status” on page 269) and by looking for state data in the non-volatile
memory (see “Non-Volatile Memory” on page 268).
6.3.9
Interrupts and Status
The Hibernation module can generate interrupts when the following conditions occur:
■ Assertion of WAKE pin
■ RTC match
■ Low battery detected
All of the interrupts are ORed together before being sent to the interrupt controller, so the Hibernate
module can only generate a single interrupt request to the controller at any given time. The software
July 25, 2011
269
Texas Instruments-Production Data
Hibernation Module
interrupt handler can service multiple interrupt events by reading the Hibernation Masked Interrupt
Status (HIBMIS) register. Software can also read the status of the Hibernation module at any time
by reading the HIBRIS register which shows all of the pending events. This register can be used
after waking from hibernation to see if the wake condition was caused by the WAKE signal or the
RTC match.
The events that can trigger an interrupt are configured by setting the appropriate bits in the
Hibernation Interrupt Mask (HIBIM) register. Pending interrupts can be cleared by writing the
corresponding bit in the Hibernation Interrupt Clear (HIBIC) register.
6.4
Initialization and Configuration
The Hibernation module has several different configurations. The following sections show the
recommended programming sequence for various scenarios. The examples below assume that a
32.768-kHz oscillator is used, and thus always set the CLKSEL bit of the HIBCTL register. If a
4.194304-MHz crystal is used instead, then the CLKSEL bit remains cleared. Because the Hibernation
module runs at 32.768 kHz and is asynchronous to the rest of the microcontroller, which is run off
the system clock, software must allow a delay of tHIB_REG_ACCESS after writes to certain registers
(see “Register Access Timing” on page 265). The registers that require a delay are listed in a note
in “Register Map” on page 272 as well as in each register description.
6.4.1
Initialization
The Hibernation module comes out of reset with the system clock enabled to the module, but if the
system clock to the module has been disabled, then it must be re-enabled, even if the RTC feature
is not used. See page 237.
If a 4.194304-MHz crystal is used as the Hibernation module clock source, perform the following
steps:
1. Write 0x40 to the HIBCTL register at offset 0x10 to enable the crystal and select the divide-by-128
input path.
2. Wait until the WC interrupt in the HIBMIS register has been triggered before performing any other
operations with the Hibernation module.
If a 32.678-kHz single-ended oscillator is used as the Hibernation module clock source, then perform
the following steps:
1. Write 0x44 to the HIBCTL register at offset 0x10 to enable the oscillator input and bypass the
on-chip oscillator.
2. No delay is necessary.
The above steps are only necessary when the entire system is initialized for the first time. If the
microcontroller has been in hibernation, then the Hibernation module has already been powered
up and the above steps are not necessary. The software can detect that the Hibernation module
and clock are already powered by examining the CLK32EN bit of the HIBCTL register.
Table 6-3 on page 270 illustrates how the clocks function with various bit setting both in normal
operation and in hibernation.
Table 6-3. Hibernation Module Clock Operation
CLK32EN PINWEN RTCWEN CLKSEL RTCEN Result Normal Operation
0
X
X
X
X
Hibernation module disabled
270
Result Hibernation
Hibernation module disabled
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 6-3. Hibernation Module Clock Operation (continued)
CLK32EN PINWEN RTCWEN CLKSEL RTCEN Result Normal Operation
6.4.2
Result Hibernation
1
0
0
0
1
RTC match capability enabled.
Module clocked from
4.184304-MHz crystal.
No hibernation
1
0
0
1
1
RTC match capability enabled.
Module clocked from 32.768-kHz
oscillator.
No hibernation
1
0
1
X
1
Module clocked from selected
source
RTC match for wake-up event
1
1
0
X
0
Module clocked from selected
source
Clock is powered down during
hibernation and powered up again
on external wake-up event.
1
1
0
X
1
Module clocked from selected
source
Clock is powered up during
hibernation for RTC. Wake up on
external event.
1
1
1
X
1
Module clocked from selected
source
RTC match or external wake-up
event, whichever occurs first.
RTC Match Functionality (No Hibernation)
Use the following steps to implement the RTC match functionality of the Hibernation module:
1. Write the required RTC match value to one of the HIBRTCMn registers at offset 0x004 or 0x008.
2. Write the required RTC load value to the HIBRTCLD register at offset 0x00C.
3. Set the required RTC match interrupt mask in the RTCALT0 and RTCALT1 bits (bits 1:0) in the
HIBIM register at offset 0x014.
4. Write 0x0000.0041 to the HIBCTL register at offset 0x010 to enable the RTC to begin counting.
6.4.3
RTC Match/Wake-Up from Hibernation
Use the following steps to implement the RTC match and wake-up functionality of the Hibernation
module:
1. Write the required RTC match value to the HIBRTCMn registers at offset 0x004 or 0x008.
2. Write the required RTC load value to the HIBRTCLD register at offset 0x00C.
3. Write any data to be retained during power cut to the HIBDATA register at offsets 0x030-0x12C.
4. Set the RTC Match Wake-Up and start the hibernation sequence by writing 0x0000.004F to the
HIBCTL register at offset 0x010.
6.4.4
External Wake-Up from Hibernation
Use the following steps to implement the Hibernation module with the external WAKE pin as the
wake-up source for the microcontroller:
1. Write any data to be retained during power cut to the HIBDATA register at offsets 0x030-0x12C.
2. Enable the external wake and start the hibernation sequence by writing 0x0000.0056 to the
HIBCTL register at offset 0x010.
July 25, 2011
271
Texas Instruments-Production Data
Hibernation Module
Note that in this mode, if the RTC is disabled, then the Hibernation clock source is powered down
during Hibernation mode and is powered up again on the external wake event to save power during
hibernation. If the RTC is enabled before hibernation, it continues to operate during hibernation.
6.4.5
RTC or External Wake-Up from Hibernation
1. Write the required RTC match value to the HIBRTCMn registers at offset 0x004 or 0x008.
2. Write the required RTC load value to the HIBRTCLD register at offset 0x00C.
3. Write any data to be retained during power cut to the HIBDATA register at offsets 0x030-0x12C.
4. Set the RTC Match/External Wake-Up and start the hibernation sequence by writing 0x0000.005F
to the HIBCTL register at offset 0x010.
6.4.6
Register Reset
The Hibernation module handles resets according to the following conditions:
■ Cold Reset
When the Hibernation module has no voltage applied to either VDD or VBAT, and a voltage is
subsequently applied to either VDD or VBAT, all Hibernation module registers are reset to the
value in Table 6-4 on page 273.
■ Reset During Hibernation Module Disable
When the module has either not been enabled or has been disabled by software, the reset is
passed through to the Hibernation module circuitry, and the internal state of the module is reset.
Non-volatile memory contents are not reset to zero and contents after reset are indeterminate.
■ Reset While Hibernation Module is in Hibernation Mode
While in Hibernation mode, or while transitioning from Hibernation mode to run mode, the reset
generated by the POR circuitry of the microcontroller is suppressed, and the state of the
Hibernation module's registers is unaffected.
■ Reset While Hibernation Module is in Normal Mode
While in normal mode (not hibernating), any reset is suppressed if either the RTCEN or the PINWEN
bit is set in the HIBCTL register, and the content/state of the control and data registers is
unaffected.
Software must initialize any control or data registers in this condition. Therefore, software is the
only mechanism to set or clear the CLK32EN bit and real-time clock operation, or to clear contents
of the data memory. The only state that must be cleared by a reset operation while not in
Hibernation mode is any state that prevents software from managing the interface.
Note:
6.5
If VDD drops below operational range while in normal mode (not hibernating), all
Hibernation module registers are reset to the value in Table 6-4 on page 273, regardless
of whether the proper voltage is applied to VBAT.
Register Map
Table 6-4 on page 273 lists the Hibernation registers. All addresses given are relative to the Hibernation
Module base address at 0x400F.C000. Note that the system clock to the Hibernation module must
be enabled before the registers can be programmed (see page 237). There must be a delay of 3
272
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
system clocks after the Hibernation module clock is enabled before any Hibernation module registers
are accessed.
Note:
HIBRTCC, HIBRTCM0, HIBRTCM1, HIBRTCLD, HIBRTCT, and HIBDATA are on the
Hibernation module clock domain and have special timing requirements. Software should
make use of the WRC bit in the HIBCTL register to ensure that the required timing gap has
elapsed. If the WRC bit is clear, any attempted write access is ignored. See “Register Access
Timing” on page 265.
Important: Reset values apply only to a cold reset. Once configured, the Hibernate module ignores
any system reset, other than power on reset, as long as VBAT is present.
Table 6-4. Hibernation Module Register Map
Offset
Name
0x000
Reset
HIBRTCC
RO
0x0000.0000
Hibernation RTC Counter
274
0x004
HIBRTCM0
R/W
0xFFFF.FFFF
Hibernation RTC Match 0
275
0x008
HIBRTCM1
R/W
0xFFFF.FFFF
Hibernation RTC Match 1
276
0x00C
HIBRTCLD
R/W
0xFFFF.FFFF
Hibernation RTC Load
277
0x010
HIBCTL
R/W
0x8000.0000
Hibernation Control
278
0x014
HIBIM
R/W
0x0000.0000
Hibernation Interrupt Mask
281
0x018
HIBRIS
RO
0x0000.0000
Hibernation Raw Interrupt Status
283
0x01C
HIBMIS
RO
0x0000.0000
Hibernation Masked Interrupt Status
285
0x020
HIBIC
R/W1C
0x0000.0000
Hibernation Interrupt Clear
287
0x024
HIBRTCT
R/W
0x0000.7FFF
Hibernation RTC Trim
288
0x0300x12C
HIBDATA
R/W
-
Hibernation Data
289
6.6
Description
See
page
Type
Register Descriptions
The remainder of this section lists and describes the Hibernation module registers, in numerical
order by address offset.
July 25, 2011
273
Texas Instruments-Production Data
Hibernation Module
Register 1: Hibernation RTC Counter (HIBRTCC), offset 0x000
This register is the current 32-bit value of the RTC counter.
Note:
HIBRTCC, HIBRTCM0, HIBRTCM1, HIBRTCLD, HIBRTCT, and HIBDATA are on the
Hibernation module clock domain and have special timing requirements. Software should
make use of the WRC bit in the HIBCTL register to ensure that the required timing gap has
elapsed. If the WRC bit is clear, any attempted write access is ignored. See “Register Access
Timing” on page 265.
Hibernation RTC Counter (HIBRTCC)
Base 0x400F.C000
Offset 0x000
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RTCC
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RTCC
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
31:0
RTCC
RO
RO
0
Reset
RO
0
Description
0x0000.0000 RTC Counter
A read returns the 32-bit counter value, which represents the seconds
elapsed since the RTC was enabled. This register is read-only. To
change the value, use the HIBRTCLD register.
274
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 2: Hibernation RTC Match 0 (HIBRTCM0), offset 0x004
This register is the 32-bit match 0 register for the RTC counter.
Note:
HIBRTCC, HIBRTCM0, HIBRTCM1, HIBRTCLD, HIBRTCT, and HIBDATA are on the
Hibernation module clock domain and have special timing requirements. Software should
make use of the WRC bit in the HIBCTL register to ensure that the required timing gap has
elapsed. If the WRC bit is clear, any attempted write access is ignored. See “Register Access
Timing” on page 265.
Hibernation RTC Match 0 (HIBRTCM0)
Base 0x400F.C000
Offset 0x004
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RTCM0
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
RTCM0
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
31:0
RTCM0
R/W
R/W
1
Reset
R/W
1
Description
0xFFFF.FFFF RTC Match 0
A write loads the value into the RTC match register.
A read returns the current match value.
July 25, 2011
275
Texas Instruments-Production Data
Hibernation Module
Register 3: Hibernation RTC Match 1 (HIBRTCM1), offset 0x008
This register is the 32-bit match 1 register for the RTC counter.
Note:
HIBRTCC, HIBRTCM0, HIBRTCM1, HIBRTCLD, HIBRTCT, and HIBDATA are on the
Hibernation module clock domain and have special timing requirements. Software should
make use of the WRC bit in the HIBCTL register to ensure that the required timing gap has
elapsed. If the WRC bit is clear, any attempted write access is ignored. See “Register Access
Timing” on page 265.
Hibernation RTC Match 1 (HIBRTCM1)
Base 0x400F.C000
Offset 0x008
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RTCM1
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
RTCM1
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
31:0
RTCM1
R/W
R/W
1
Reset
R/W
1
Description
0xFFFF.FFFF RTC Match 1
A write loads the value into the RTC match register.
A read returns the current match value.
276
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 4: Hibernation RTC Load (HIBRTCLD), offset 0x00C
This register is used to load a 32-bit value loaded into the RTC counter. The load occurs immediately
upon this register being written.
Note:
HIBRTCC, HIBRTCM0, HIBRTCM1, HIBRTCLD, HIBRTCT, and HIBDATA are on the
Hibernation module clock domain and have special timing requirements. Software should
make use of the WRC bit in the HIBCTL register to ensure that the required timing gap has
elapsed. If the WRC bit is clear, any attempted write access is ignored. See “Register Access
Timing” on page 265.
Hibernation RTC Load (HIBRTCLD)
Base 0x400F.C000
Offset 0x00C
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RTCLD
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
RTCLD
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
31:0
RTCLD
R/W
R/W
1
Reset
R/W
1
Description
0xFFFF.FFFF RTC Load
A write loads the current value into the RTC counter (RTCC).
A read returns the 32-bit load value.
July 25, 2011
277
Texas Instruments-Production Data
Hibernation Module
Register 5: Hibernation Control (HIBCTL), offset 0x010
This register is the control register for the Hibernation module. This register must be written last
before a hibernate event is issued. Writes to other registers after the HIBREQ bit is set are not
guaranteed to complete before hibernation is entered.
Hibernation Control (HIBCTL)
Base 0x400F.C000
Offset 0x010
Type R/W, reset 0x8000.0000
31
30
29
28
27
26
25
24
RO
1
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
WRC
Type
Reset
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
HIBREQ
RTCEN
R/W
0
R/W
0
reserved
reserved
Type
Reset
23
RO
0
VDD3ON VABORT CLK32EN LOWBATEN PINWEN RTCWEN CLKSEL
Bit/Field
Name
Type
Reset
31
WRC
RO
1
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Write Complete/Capable
Value Description
0
The interface is processing a prior write and is busy. Any write
operation that is attempted while WRC is 0 results in
undetermined behavior.
1
The interface is ready to accept a write.
Software must poll this bit between write requests and defer writes until
WRC=1 to ensure proper operation.
The bit name WRC means "Write Complete," which is the normal use of
the bit (between write accesses). However, because the bit is set
out-of-reset, the name can also mean "Write Capable" which simply
indicates that the interface may be written to by software. This difference
may be exploited by software at reset time to detect which method of
programming is appropriate: 0 = software delay loops required; 1 = WRC
paced available.
30:9
reserved
RO
0x000
8
VDD3ON
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
VDD Powered
Value Description
1
The internal switches control the power to the on-chip modules
(VDD3ON mode).
0
The internal switches are not used. The HIB signal should be
used to control an external switch or regulator.
Note that regardless of the status of the VDD3ON bit, the HIB signal is
asserted during Hibernate mode. Thus, when VDD3ON is set, the HIB
signal should not be connected to the 3.3V regulator, and the 3.3V power
source should remain connected.
278
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
7
VABORT
R/W
0
6
CLK32EN
R/W
0
Description
Power Cut Abort Enable
Value
Description
1
When this bit is set, the battery voltage level is checked
before entering hibernation. If VBAT is less than VLOWBAT,
the microcontroller does not go into hibernation.
0
The microcontroller goes into hibernation regardless of the
voltage level of the battery.
Clocking Enable
This bit must be enabled to use the Hibernation module.
5
4
3
2
LOWBATEN
PINWEN
RTCWEN
CLKSEL
R/W
R/W
R/W
R/W
0
0
0
0
Value
Description
1
The Hibernation module clock source is enabled.
0
The Hibernation module clock source is disabled.
Low Battery Monitoring Enable
Value
Description
1
Low battery voltage detection is enabled. When this bit is
set, the battery voltage level is checked before entering
hibernation. If VBAT is less than VLOWBAT, the LOWBAT bit
in the HIBRIS register is set.
0
Low battery monitoring is disabled.
External WAKE Pin Enable
Value
Description
1
An assertion of the WAKE pin takes the microcontroller
out of hibernation.
0
The status of the WAKE pin has no effect on hibernation.
RTC Wake-up Enable
Value
Description
1
An RTC match event (the value the HIBRTCC register
matches the value of the HIBRTCM0 or HIBRTCM1
register) takes the microcontroller out of hibernation.
0
An RTC match event has no effect on hibernation.
Hibernation Module Clock Select
Value
Description
1
Use raw output. Use this value for a 32.768-kHz
oscillator.
0
Use Divide-by-128 output. Use this value for a
4.194304-MHz crystal.
July 25, 2011
279
Texas Instruments-Production Data
Hibernation Module
Bit/Field
Name
Type
Reset
1
HIBREQ
R/W
0
Description
Hibernation Request
Value
Description
1
Set this bit to initiate hibernation.
0
No hibernation request.
After a wake-up event, this bit is automatically cleared by hardware.
0
RTCEN
R/W
0
RTC Timer Enable
Value
Description
1
The Hibernation module RTC is enabled.
The RTC remains active during hibernation.
0
The Hibernation module RTC is disabled.
When this bit is clear and PINWEN is set, enabling an
external wake event, the RTC stops during hibernation to
save power.
280
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 6: Hibernation Interrupt Mask (HIBIM), offset 0x014
This register is the interrupt mask register for the Hibernation module interrupt sources. Each bit in
this register masks the corresponding bit in the Hibernation Raw Interrupt Status (HIBRIS) register.
If a bit is unmasked, the interrupt is sent to the interrupt controller. If the bit is masked, the interrupt
is not sent to the interrupt controller.
Hibernation Interrupt Mask (HIBIM)
Base 0x400F.C000
Offset 0x014
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
EXTW
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
3
EXTW
R/W
0
R/W
0
LOWBAT RTCALT1 RTCALT0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
External Wake-Up Interrupt Mask
Value Description
2
LOWBAT
R/W
0
1
An interrupt is sent to the interrupt controller when the EXTW bit
in the HIBRIS register is set.
0
The EXTW interrupt is suppressed and not sent to the interrupt
controller.
Low Battery Voltage Interrupt Mask
Value Description
1
RTCALT1
R/W
0
1
An interrupt is sent to the interrupt controller when the LOWBAT
bit in the HIBRIS register is set.
0
The LOWBAT interrupt is suppressed and not sent to the interrupt
controller.
RTC Alert 1 Interrupt Mask
Value Description
1
An interrupt is sent to the interrupt controller when the RTCALT1
bit in the HIBRIS register is set.
0
The RTCALT1 interrupt is suppressed and not sent to the
interrupt controller.
July 25, 2011
281
Texas Instruments-Production Data
Hibernation Module
Bit/Field
Name
Type
Reset
0
RTCALT0
R/W
0
Description
RTC Alert 0 Interrupt Mask
Value Description
1
An interrupt is sent to the interrupt controller when the RTCALT0
bit in the HIBRIS register is set.
0
The RTCALT0 interrupt is suppressed and not sent to the
interrupt controller.
282
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 7: Hibernation Raw Interrupt Status (HIBRIS), offset 0x018
This register is the raw interrupt status for the Hibernation module interrupt sources. Each bit can
be masked by clearing the corresponding bit in the HIBIM register. When a bit is masked, the
interrupt is not sent to the interrupt controller. Bits in this register are cleared by writing a 1 to the
corresponding bit in the Hibernation Interrupt Clear (HIBIC) register or by entering hibernation.
Hibernation Raw Interrupt Status (HIBRIS)
Base 0x400F.C000
Offset 0x018
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
EXTW
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
3
EXTW
RO
0
RO
0
LOWBAT RTCALT1 RTCALT0
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
External Wake-Up Raw Interrupt Status
Value Description
1
The WAKE pin has been asserted.
0
The WAKE pin has not been asserted.
This bit is cleared by writing a 1 to the EXTW bit in the HIBIC register.
2
LOWBAT
RO
0
Low Battery Voltage Raw Interrupt Status
Value Description
1
The battery voltage dropped below VLOWBAT.
0
The battery voltage has not dropped below VLOWBAT.
This bit is cleared by writing a 1 to the LOWBAT bit in the HIBIC register.
1
RTCALT1
RO
0
RTC Alert 1 Raw Interrupt Status
Value Description
1
The value of the HIBRTCC register matches the value in the
HIBRTCM1 register.
0
No match
This bit is cleared by writing a 1 to the RTCALT1 bit in the HIBIC register.
July 25, 2011
283
Texas Instruments-Production Data
Hibernation Module
Bit/Field
Name
Type
Reset
0
RTCALT0
RO
0
Description
RTC Alert 0 Raw Interrupt Status
Value Description
1
The value of the HIBRTCC register matches the value in the
HIBRTCM0 register.
0
No match
This bit is cleared by writing a 1 to the RTCALT0 bit in the HIBIC register.
284
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 8: Hibernation Masked Interrupt Status (HIBMIS), offset 0x01C
This register is the masked interrupt status for the Hibernation module interrupt sources. Bits in this
register are the AND of the corresponding bits in the HIBRIS and HIBIM registers. When both
corresponding bits are set, the bit in this register is set, and the interrupt is sent to the interrupt
controller.
Hibernation Masked Interrupt Status (HIBMIS)
Base 0x400F.C000
Offset 0x01C
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
EXTW
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
3
EXTW
RO
0
RO
0
LOWBAT RTCALT1 RTCALT0
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
External Wake-Up Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to a WAKE pin
assertion.
0
An external wake-up interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the EXTW bit in the HIBIC register.
2
LOWBAT
RO
0
Low Battery Voltage Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to a low battery voltage
condition.
0
A low battery voltage interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the LOWBAT bit in the HIBIC register.
1
RTCALT1
RO
0
RTC Alert 1 Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to an RTC match.
0
An RTC match interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the RTCALT1 bit in the HIBIC register.
July 25, 2011
285
Texas Instruments-Production Data
Hibernation Module
Bit/Field
Name
Type
Reset
0
RTCALT0
RO
0
Description
RTC Alert 0 Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to an RTC match.
0
An RTC match interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the RTCALT0 bit in the HIBIC register.
286
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 9: Hibernation Interrupt Clear (HIBIC), offset 0x020
This register is the interrupt write-one-to-clear register for the Hibernation module interrupt sources.
Writing a 1 to a bit clears the corresponding interrupt in the HIBRIS register.
Hibernation Interrupt Clear (HIBIC)
Base 0x400F.C000
Offset 0x020
Type R/W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W1C
0
reserved
Type
Reset
reserved
Type
Reset
EXTW
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
3
EXTW
R/W1C
0
LOWBAT RTCALT1 RTCALT0
R/W1C
0
R/W1C
0
R/W1C
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
External Wake-Up Masked Interrupt Clear
Writing a 1 to this bit clears the EXTW bit in the HIBRIS and HIBMIS
registers.
Reads return an indeterminate value.
2
LOWBAT
R/W1C
0
Low Battery Voltage Masked Interrupt Clear
Writing a 1 to this bit clears the LOWBAT bit in the HIBRIS and HIBMIS
registers.
Reads return an indeterminate value.
1
RTCALT1
R/W1C
0
RTC Alert1 Masked Interrupt Clear
Writing a 1 to this bit clears the RTCALT1 bit in the HIBRIS and HIBMIS
registers.
Reads return an indeterminate value.
0
RTCALT0
R/W1C
0
RTC Alert0 Masked Interrupt Clear
Writing a 1 to this bit clears the RTCALT0 bit in the HIBRIS and HIBMIS
registers.
Reads return an indeterminate value.
July 25, 2011
287
Texas Instruments-Production Data
Hibernation Module
Register 10: Hibernation RTC Trim (HIBRTCT), offset 0x024
This register contains the value that is used to trim the RTC clock predivider. It represents the
computed underflow value that is used during the trim cycle. It is represented as 0x7FFF ± N clock
cycles, where N is the number of clock cycles to add or subtract every 63 seconds.
Note:
HIBRTCC, HIBRTCM0, HIBRTCM1, HIBRTCLD, HIBRTCT, and HIBDATA are on the
Hibernation module clock domain and have special timing requirements. Software should
make use of the WRC bit in the HIBCTL register to ensure that the required timing gap has
elapsed. If the WRC bit is clear, any attempted write access is ignored. See “Register Access
Timing” on page 265.
Hibernation RTC Trim (HIBRTCT)
Base 0x400F.C000
Offset 0x024
Type R/W, reset 0x0000.7FFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
TRIM
Type
Reset
R/W
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
Reset
Description
31:16
reserved
RO
0x0000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15:0
TRIM
R/W
0x7FFF
RTC Trim Value
This value is loaded into the RTC predivider every 64 seconds. It is used
to adjust the RTC rate to account for drift and inaccuracy in the clock
source. Compensation can be adjusted by software by moving the default
value of 0x7FFF up or down. Moving the value up slows down the RTC
and moving the value down speeds up the RTC.
288
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 11: Hibernation Data (HIBDATA), offset 0x030-0x12C
This address space is implemented as a 64x32-bit memory (256 bytes). It can be loaded by the
system processor in order to store any non-volatile state data and does not lose power during a
power cut operation.
Note:
HIBRTCC, HIBRTCM0, HIBRTCM1, HIBRTCLD, HIBRTCT, and HIBDATA are on the
Hibernation module clock domain and have special timing requirements. Software should
make use of the WRC bit in the HIBCTL register to ensure that the required timing gap has
elapsed. If the WRC bit is clear, any attempted write access is ignored. See “Register Access
Timing” on page 265.
Hibernation Data (HIBDATA)
Base 0x400F.C000
Offset 0x030-0x12C
Type R/W, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
7
6
5
4
3
2
1
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
RTD
Type
Reset
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
15
14
13
12
11
10
9
8
RTD
Type
Reset
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
Bit/Field
Name
Type
Reset
31:0
RTD
R/W
-
R/W
-
Description
Hibernation Module NV Data
July 25, 2011
289
Texas Instruments-Production Data
Internal Memory
7
Internal Memory
The LM3S1G58 microcontroller comes with 64 KB of bit-banded SRAM, internal ROM,and 384 KB
of Flash memory. The Flash memory controller provides a user-friendly interface, making Flash
memory programming a simple task. Flash memory protection can be applied to the Flash memory
on a 2-KB block basis.
7.1
Block Diagram
Figure 7-1 on page 290 illustrates the internal memory blocks and control logic. The dashed boxes
in the figure indicate registers residing in the System Control module.
Figure 7-1. Internal Memory Block Diagram
ROM Control
ROM Array
RMCTL
Flash Control
Icode Bus
Cortex-M3
FMA
FMD
FMC
FCRIS
FCIM
FCMISC
Dcode Bus
Flash Array
System
Bus
Flash Write Buffer
FMC2
FWBVAL
FWBn
32 words
Flash Protection
Bridge
FMPREn
FMPRE
FMPPEn
FMPPE
User
Registers
Flash
Timing
BOOTCFG
USECRL
USER_REG0
USER_REG1
USER_REG2
USER_REG3
SRAM Array
7.2
Functional Description
This section describes the functionality of the SRAM, ROM, and Flash memories.
Note:
The μDMA controller can transfer data to and from the on-chip SRAM. However, because
the Flash memory and ROM are located on a separate internal bus, it is not possible to
transfer data from the Flash memory or ROM with the μDMA controller.
290
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
7.2.1
SRAM
®
The internal SRAM of the Stellaris devices is located at address 0x2000.0000 of the device memory
map. To reduce the number of time consuming read-modify-write (RMW) operations, ARM provides
bit-banding technology in the processor. With a bit-band-enabled processor, certain regions in the
memory map (SRAM and peripheral space) can use address aliases to access individual bits in a
single, atomic operation. The bit-band base is located at address 0x2200.0000.
The bit-band alias is calculated by using the formula:
bit-band alias = bit-band base + (byte offset * 32) + (bit number * 4)
For example, if bit 3 at address 0x2000.1000 is to be modified, the bit-band alias is calculated as:
0x2200.0000 + (0x1000 * 32) + (3 * 4) = 0x2202.000C
With the alias address calculated, an instruction performing a read/write to address 0x2202.000C
allows direct access to only bit 3 of the byte at address 0x2000.1000.
For details about bit-banding, see “Bit-Banding” on page 71.
Note:
7.2.2
The SRAM is implemented using two 32-bit wide SRAM banks (separate SRAM arrays).
The banks are partitioned such that one bank contains all even words (the even bank) and
the other contains all odd words (the odd bank). A write access that is followed immediately
by a read access to the same bank incurs a stall of a single clock cycle. However, a write
to one bank followed by a read of the other bank can occur in successive clock cycles
without incurring any delay.
ROM
The internal ROM of the Stellaris device is located at address 0x0100.0000 of the device memory
map. Detailed information on the ROM contents can be found in the Stellaris® ROM User’s Guide.
The ROM contains the following components:
■ Stellaris Boot Loader and vector table
■ Stellaris Peripheral Driver Library (DriverLib) release for product-specific peripherals and interfaces
■ Advanced Encryption Standard (AES) cryptography tables
■ Cyclic Redundancy Check (CRC) error detection functionality
The boot loader is used as an initial program loader (when the Flash memory is empty) as well as
an application-initiated firmware upgrade mechanism (by calling back to the boot loader). The
Peripheral Driver Library APIs in ROM can be called by applications, reducing Flash memory
requirements and freeing the Flash memory to be used for other purposes (such as additional
features in the application). Advance Encryption Standard (AES) is a publicly defined encryption
standard used by the U.S. Government and Cyclic Redundancy Check (CRC) is a technique to
validate a span of data has the same contents as when previously checked.
7.2.2.1
Boot Loader Overview
The Stellaris Boot Loader is used to download code to the Flash memory of a device without the
use of a debug interface. When the core is reset, the user has the opportunity to direct the core to
execute the ROM Boot Loader or the application in Flash memory by using any GPIO signal in Ports
A-H as configured in the Boot Configuration (BOOTCFG) register.
July 25, 2011
291
Texas Instruments-Production Data
Internal Memory
At reset, the ROM is mapped over the Flash memory so that the ROM boot sequence is always
executed. The boot sequence executed from ROM is as follows:
1. The BA bit (below) is cleared such that ROM is mapped to 0x01xx.xxxx and Flash memory is
mapped to address 0x0.
2. The BOOTCFG register is read. If the EN bit is clear, the status of the specified GPIO pin is
compared with the specified polarity. If the status matches the specified polarity, the ROM is
mapped to address 0x0000.0000 and execution continues out of the ROM Boot Loader.
3. If the status doesn't match the specified polarity, the data at address 0x0000.0004 is read, and
if the data at this address is 0xFFFF.FFFF, the ROM is mapped to address 0x0000.0000 and
execution continues out of the ROM Boot Loader.
4. If there is data at address 0x0000.0004 that is not 0xFFFF.FFFF, the stack pointer (SP) is loaded
from Flash memory at address 0x0000.0000 and the program counter (PC) is loaded from
address 0x0000.0004. The user application begins executing.
The boot loader uses a simple packet interface to provide synchronous communication with the
device. The speed of the boot loader is determined by the internal oscillator (PIOSC) frequency as
it does not enable the PLL. The following serial interfaces can be used:
■ UART0
■ SSI0
■ I2C0
For simplicity, both the data format and communication protocol are identical for all serial interfaces.
See the Stellaris® Boot Loader User's Guide for information on the boot loader software.
7.2.2.2
Stellaris Peripheral Driver Library
The Stellaris Peripheral Driver Library contains a file called driverlib/rom.h that assists with
calling the peripheral driver library functions in the ROM. The detailed description of each function
is available in the Stellaris® ROM User’s Guide. See the "Using the ROM" chapter of the Stellaris®
Peripheral Driver Library User's Guide for more details on calling the ROM functions and using
driverlib/rom.h.
A table at the beginning of the ROM points to the entry points for the APIs that are provided in the
ROM. Accessing the API through these tables provides scalability; while the API locations may
change in future versions of the ROM, the API tables will not. The tables are split into two levels;
the main table contains one pointer per peripheral which points to a secondary table that contains
one pointer per API that is associated with that peripheral. The main table is located at 0x0100.0010,
right after the Cortex-M3 vector table in the ROM.
DriverLib functions are described in detail in the Stellaris® Peripheral Driver Library User's Guide.
Additional APIs are available for graphics and USB functions, but are not preloaded into ROM. The
Stellaris Graphics Library provides a set of graphics primitives and a widget set for creating graphical
user interfaces on Stellaris microcontroller-based boards that have a graphical display (for more
information, see the Stellaris® Graphics Library User's Guide).
292
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
7.2.2.3
Advanced Encryption Standard (AES) Cryptography Tables
AES is a strong encryption method with reasonable performance and size. AES is fast in both
hardware and software, is fairly easy to implement, and requires little memory. AES is ideal for
applications that can use pre-arranged keys, such as setup during manufacturing or configuration.
Four data tables used by the XySSL AES implementation are provided in the ROM. The first is the
forward S-box substitution table, the second is the reverse S-box substitution table, the third is the
forward polynomial table, and the final is the reverse polynomial table. See the Stellaris® ROM
User’s Guide for more information on AES.
7.2.2.4
Cyclic Redundancy Check (CRC) Error Detection
The CRC technique can be used to validate correct receipt of messages (nothing lost or modified
in transit), to validate data after decompression, to validate that Flash memory contents have not
been changed, and for other cases where the data needs to be validated. A CRC is preferred over
a simple checksum (e.g. XOR all bits) because it catches changes more readily. See the Stellaris®
ROM User’s Guide for more information on CRC.
7.2.3
Flash Memory
At system clock speeds of 50 MHz and below, the Flash memory is read in a single cycle. The Flash
memory is organized as a set of 1-KB blocks that can be individually erased. An individual 32-bit
word can be programmed to change bits from 1 to 0. In addition, a write buffer provides the ability
to concurrently program 32 continuous words in Flash memory. Erasing a block causes the entire
contents of the block to be reset to all 1s. The 1-KB blocks are paired into sets of 2-KB blocks that
can be individually protected. The protection allows blocks to be marked as read-only or execute-only,
providing different levels of code protection. Read-only blocks cannot be erased or programmed,
protecting the contents of those blocks from being modified. Execute-only blocks cannot be erased
or programmed and can only be read by the controller instruction fetch mechanism, protecting the
contents of those blocks from being read by either the controller or by a debugger.
Caution – The Stellaris Flash memory array has ECC which uses a test port into the Flash memory to
continually scan the array for ECC errors and to correct any that are detected. This operation is
transparent to the microcontroller. The BIST must scan the entire memory array occasionally to ensure
integrity, taking about five minutes to do so. In systems where the microcontroller is frequently powered
for less than five minutes, power should be removed from the microcontroller in a controlled manner
to ensure proper operation. This controlled manner can either be through entering Hibernation mode
or software can request permission to power down the part using the USDREQ bit in the Flash Control
(FCTL) register and wait to receive an acknowledge from the USDACK bit prior to removing power. If
the microcontroller is powered down using this controlled method, the BIST engine keeps track of
where it was in the memory array and it always scans the complete array after any aggregate of five
minutes powered-on, regardless of the number of intervening power cycles. If the microcontroller is
powered down before five minutes of being powered up, BIST starts again from wherever it left off
before the last controlled power-down or from 0 if there never was a controlled power down. An
occasional short power down is not a concern, but the microcontroller should not always be powered
down frequently in an uncontrolled manner. The microcontroller can be power-cycled as frequently
as necessary if it is powered-down in a controlled manner.
7.2.3.1
Prefetch Buffer
The Flash memory controller has a prefetch buffer that is automatically used when the CPU frequency
is greater than 50 MHz. In this mode, the Flash memory operates at half of the system clock. The
prefetch buffer fetches two 32-bit words per clock allowing instructions to be fetched with no wait
states while code is executing linearly. The fetch buffer includes a branch speculation mechanism
July 25, 2011
293
Texas Instruments-Production Data
Internal Memory
that recognizes a branch and avoids extra wait states by not reading the next word pair. Also, short
loop branches often stay in the buffer. As a result, some branches can be executed with no wait
states. Other branches incur a single wait state.
7.2.3.2
Flash Memory Protection
The user is provided two forms of Flash memory protection per 2-KB Flash memory block in six
pairs of 32-bit wide registers. The policy for each protection form is controlled by individual bits (per
policy per block) in the FMPPEn and FMPREn registers.
■ Flash Memory Protection Program Enable (FMPPEn): If a bit is set, the corresponding block
may be programmed (written) or erased. If a bit is cleared, the corresponding block may not be
changed.
■ Flash Memory Protection Read Enable (FMPREn): If a bit is set, the corresponding block may
be executed or read by software or debuggers. If a bit is cleared, the corresponding block may
only be executed, and contents of the memory block are prohibited from being read as data.
The policies may be combined as shown in Table 7-1 on page 294.
Table 7-1. Flash Memory Protection Policy Combinations
FMPPEn
FMPREn
0
0
Protection
Execute-only protection. The block may only be executed and may not be written or erased.
This mode is used to protect code.
1
0
The block may be written, erased or executed, but not read. This combination is unlikely to
be used.
0
1
Read-only protection. The block may be read or executed but may not be written or erased.
This mode is used to lock the block from further modification while allowing any read or
execute access.
1
1
No protection. The block may be written, erased, executed or read.
A Flash memory access that attempts to read a read-protected block (FMPREn bit is set) is prohibited
and generates a bus fault. A Flash memory access that attempts to program or erase a
program-protected block (FMPPEn bit is set) is prohibited and can optionally generate an interrupt
(by setting the AMASK bit in the Flash Controller Interrupt Mask (FCIM) register) to alert software
developers of poorly behaving software during the development and debug phases.
The factory settings for the FMPREn and FMPPEn registers are a value of 1 for all implemented
banks. These settings create a policy of open access and programmability. The register bits may
be changed by clearing the specific register bit. The changes are not permanent until the register
is committed (saved), at which point the bit change is permanent. If a bit is changed from a 1 to a
0 and not committed, it may be restored by executing a power-on reset sequence. The changes
are committed using the Flash Memory Control (FMC) register. Details on programming these bits
are discussed in “Nonvolatile Register Programming” on page 297.
7.2.3.3
Interrupts
The Flash memory controller can generate interrupts when the following conditions are observed:
■ Programming Interrupt - signals when a program or erase action is complete.
■ Access Interrupt - signals when a program or erase action has been attempted on a 2-kB block
of memory that is protected by its corresponding FMPPEn bit.
294
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
The interrupt events that can trigger a controller-level interrupt are defined in the Flash Controller
Masked Interrupt Status (FCMIS) register (see page 306) by setting the corresponding MASK bits.
If interrupts are not used, the raw interrupt status is always visible via the Flash Controller Raw
Interrupt Status (FCRIS) register (see page 305).
Interrupts are always cleared (for both the FCMIS and FCRIS registers) by writing a 1 to the
corresponding bit in the Flash Controller Masked Interrupt Status and Clear (FCMISC) register
(see page 307).
7.2.3.4
Flash Memory Programming
The Stellaris devices provide a user-friendly interface for Flash memory programming. All
erase/program operations are handled via three registers: Flash Memory Address (FMA), Flash
Memory Data (FMD), and Flash Memory Control (FMC). Note that if the debug capabilities of the
microcontroller have been deactivated, resulting in a "locked" state, a recovery sequence must be
performed in order to reactivate the debug module. See “Recovering a "Locked"
Microcontroller” on page 162.
During a Flash memory operation (write, page erase, or mass erase) access to the Flash memory
is inhibited. As a result, instruction and literal fetches are held off until the Flash memory operation
is complete. If instruction execution is required during a Flash memory operation, the code that is
executing must be placed in SRAM and executed from there while the flash operation is in progress.
Caution – The Flash memory is divided into sectors of electrically separated address ranges of 4 KB
each, aligned on 4 KB boundaries. Erase/program operations on a 1-KB page have an electrical effect
on the other three 1-KB pages within the sector. A specific 1-KB page must be erased after 6 total
erase/program cycles occur to the other pages within its 4-KB sector. The following sequence of operations
on a 4-KB sector of Flash memory (Page 0..3) provides an example:
■ Page 3 is erase and programmed with values.
■ Page 0, Page 1, and Page 2 are erased and then programmed with values. At this point Page 3 has
been affected by 3 erase/program cycles.
■ Page 0, Page 1, and Page 2 are again erased and then programmed with values. At this point Page
3 has been affected by 6 erase/program cycles.
■ If the contents of Page 3 must continue to be valid, Page 3 must be erased and reprogrammed before
any other page in this sector has another erase or program operation.
To program a 32-bit word
1. Write source data to the FMD register.
2. Write the target address to the FMA register.
3. Write the Flash memory write key and the WRITE bit (a value of 0xA442.0001) to the FMC
register.
4. Poll the FMC register until the WRITE bit is cleared.
Important: To ensure proper operation, two writes to the same word must be separated by an
ERASE. The following two sequences are allowed:
July 25, 2011
295
Texas Instruments-Production Data
Internal Memory
■ ERASE -> PROGRAM value -> PROGRAM 0x0000.0000
■ ERASE -> PROGRAM value -> ERASE
The following sequence is NOT allowed:
■ ERASE -> PROGRAM value -> PROGRAM value
To perform an erase of a 1-KB page
1. Write the page address to the FMA register.
2. Write the Flash memory write key and the ERASE bit (a value of 0xA442.0002) to the FMC
register.
3. Poll the FMC register until the ERASE bit is cleared or, alternatively, enable the programming
interrupt using the PMASK bit in the FCIM register.
To perform a mass erase of the Flash memory
1. Write the Flash memory write key and the MERASE bit (a value of 0xA442.0004) to the FMC
register.
2. Poll the FMC register until the MERASE bit is cleared or, alternatively, enable the programming
interrupt using the PMASK bit in the FCIM register.
7.2.3.5
32-Word Flash Memory Write Buffer
A 32-word write buffer provides the capability to perform faster write accesses to the Flash memory
by concurrently programing 32 words with a single buffered Flash memory write operation. The
buffered Flash memory write operation takes the same amount of time as the single word write
operation controlled by bit 0 in the FMC register. The data for the buffered write is written to the
Flash Write Buffer (FWBn) registers.
The registers are 32-word aligned with Flash memory, and therefore the register FWB0 corresponds
with the address in FMA where bits [6:0] of FMA are all 0. FWB1 corresponds with the address in
FMA + 0x4 and so on. Only the FWBn registers that have been updated since the previous buffered
Flash memory write operation are written. The Flash Write Buffer Valid (FWBVAL) register shows
which registers have been written since the last buffered Flash memory write operation. This register
contains a bit for each of the 32 FWBn registers, where bit[n] of FWBVAL corresponds to FWBn.
The FWBn register has been updated if the corresponding bit in the FWBVAL register is set.
To program 32 words with a single buffered Flash memory write operation
1. Write the source data to the FWBn registers.
2. Write the target address to the FMA register. This must be a 32-word aligned address (that is,
bits [6:0] in FMA must be 0s).
3. Write the Flash memory write key and the WRBUF bit (a value of 0xA442.0001) to the FMC2
register.
4. Poll the FMC2 register until the WRBUF bit is cleared or wait for the PMIS interrupt to be signaled.
296
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
7.2.3.6
Nonvolatile Register Programming
This section discusses how to update registers that are resident within the Flash memory itself.
These registers exist in a separate space from the main Flash memory array and are not affected
by an ERASE or MASS ERASE operation. The bits in these registers can be changed from 1 to 0
with a write operation. The register contents are unaffected by any reset condition except power-on
reset, which returns the register contents to 0xFFFF.FFFF. By committing the register values using
the COMT bit in the FMC register, the register contents become nonvolatile and are therefore retained
following power cycling. Once the register contents are committed, the only way to restore the factory
default values is to perform the sequence described in “Recovering a "Locked"
Microcontroller” on page 162.
With the exception of the Boot Configuration (BOOTCFG) register, the settings in these registers
can be tested before committing them to Flash memory. For the BOOTCFG register, the data to be
written is loaded into the FMD register before it is committed. The FMD register is read only and
does not allow the BOOTCFG operation to be tried before committing it to nonvolatile memory.
Important: The Flash memory resident registers can only have bits changed from 1 to 0 by user
programming and can only be committed once. After being committed, these registers
can only be restored to their factory default values only by performing the sequence
described in “Recovering a "Locked" Microcontroller” on page 162. The mass erase of
the main Flash memory array caused by the sequence is performed prior to restoring
these registers.
In addition, the USER_REG0, USER_REG1, USER_REG2, USER_REG3, and BOOTCFG registers
each use bit 31 (NW) to indicate that they have not been committed and bits in the register may be
changed from 1 to 0. Table 7-2 on page 297 provides the FMA address required for commitment of
each of the registers and the source of the data to be written when the FMC register is written with
a value of 0xA442.0008. After writing the COMT bit, the user may poll the FMC register to wait for
the commit operation to complete.
Table 7-2. User-Programmable Flash Memory Resident Registers
Register to be Committed
FMA Value
Data Source
FMPRE0
0x0000.0000
FMPRE0
FMPRE1
0x0000.0002
FMPRE1
FMPRE2
0x0000.0004
FMPRE2
FMPRE3
0x0000.0006
FMPRE3
FMPRE4
0x0000.0008
FMPRE4
FMPRE5
0x0000.000A
FMPRE5
FMPPE0
0x0000.0001
FMPPE0
FMPPE1
0x0000.0003
FMPPE1
FMPPE2
0x0000.0005
FMPPE2
FMPPE3
0x0000.0007
FMPPE3
FMPRE4
0x0000.0009
FMPRE4
FMPRE5
0x0000.000B
FMPRE5
USER_REG0
0x8000.0000
USER_REG0
USER_REG1
0x8000.0001
USER_REG1
USER_REG2
0x8000.0002
USER_REG2
USER_REG3
0x8000.0003
USER_REG3
BOOTCFG
0x7510.0000
FMD
July 25, 2011
297
Texas Instruments-Production Data
Internal Memory
7.3
Register Map
Table 7-3 on page 298 lists the ROM Controller register and the Flash memory and control registers.
The offset listed is a hexadecimal increment to the register's address. The FMA, FMD, FMC, FCRIS,
FCIM, FCMISC, FMC2, FWBVAL, and FWBn register offsets are relative to the Flash memory
control base address of 0x400F.D000. The ROM and Flash memory protection register offsets are
relative to the System Control base address of 0x400F.E000.
Table 7-3. Flash Register Map
Offset
Name
Type
Reset
Description
See
page
Flash Memory Registers (Flash Control Offset)
0x000
FMA
R/W
0x0000.0000
Flash Memory Address
300
0x004
FMD
R/W
0x0000.0000
Flash Memory Data
301
0x008
FMC
R/W
0x0000.0000
Flash Memory Control
302
0x00C
FCRIS
RO
0x0000.0000
Flash Controller Raw Interrupt Status
305
0x010
FCIM
R/W
0x0000.0000
Flash Controller Interrupt Mask
306
0x014
FCMISC
R/W1C
0x0000.0000
Flash Controller Masked Interrupt Status and Clear
307
0x020
FMC2
R/W
0x0000.0000
Flash Memory Control 2
308
0x030
FWBVAL
R/W
0x0000.0000
Flash Write Buffer Valid
309
0x0F8
FCTL
R/W
0x0000.0000
Flash Control
310
0x100 0x17C
FWBn
R/W
0x0000.0000
Flash Write Buffer n
311
ROM Control
312
Memory Registers (System Control Offset)
0x0F0
RMCTL
R/W1C
-
0x130
FMPRE0
R/W
0xFFFF.FFFF
Flash Memory Protection Read Enable 0
313
0x200
FMPRE0
R/W
0xFFFF.FFFF
Flash Memory Protection Read Enable 0
313
0x134
FMPPE0
R/W
0xFFFF.FFFF
Flash Memory Protection Program Enable 0
314
0x400
FMPPE0
R/W
0xFFFF.FFFF
Flash Memory Protection Program Enable 0
314
0x1D0
BOOTCFG
R/W
0xFFFF.FFFE
Boot Configuration
315
0x1E0
USER_REG0
R/W
0xFFFF.FFFF
User Register 0
317
0x1E4
USER_REG1
R/W
0xFFFF.FFFF
User Register 1
318
0x1E8
USER_REG2
R/W
0xFFFF.FFFF
User Register 2
319
0x1EC
USER_REG3
R/W
0xFFFF.FFFF
User Register 3
320
0x204
FMPRE1
R/W
0xFFFF.FFFF
Flash Memory Protection Read Enable 1
321
0x208
FMPRE2
R/W
0xFFFF.FFFF
Flash Memory Protection Read Enable 2
322
0x20C
FMPRE3
R/W
0xFFFF.FFFF
Flash Memory Protection Read Enable 3
323
0x210
FMPRE4
R/W
0xFFFF.FFFF
Flash Memory Protection Read Enable 4
324
298
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 7-3. Flash Register Map (continued)
Name
Type
Reset
0x214
FMPRE5
R/W
0xFFFF.FFFF
Flash Memory Protection Read Enable 5
325
0x218
FMPRE6
R/W
0x0000.0000
Flash Memory Protection Read Enable 6
326
0x21C
FMPRE7
R/W
0x0000.0000
Flash Memory Protection Read Enable 7
327
0x404
FMPPE1
R/W
0xFFFF.FFFF
Flash Memory Protection Program Enable 1
328
0x408
FMPPE2
R/W
0xFFFF.FFFF
Flash Memory Protection Program Enable 2
329
0x40C
FMPPE3
R/W
0xFFFF.FFFF
Flash Memory Protection Program Enable 3
330
0x410
FMPPE4
R/W
0xFFFF.FFFF
Flash Memory Protection Program Enable 4
331
0x414
FMPPE5
R/W
0xFFFF.FFFF
Flash Memory Protection Program Enable 5
332
0x418
FMPPE6
R/W
0x0000.0000
Flash Memory Protection Program Enable 6
333
0x41C
FMPPE7
R/W
0x0000.0000
Flash Memory Protection Program Enable 7
334
7.4
Description
See
page
Offset
Flash Memory Register Descriptions (Flash Control Offset)
This section lists and describes the Flash Memory registers, in numerical order by address offset.
Registers in this section are relative to the Flash control base address of 0x400F.D000.
July 25, 2011
299
Texas Instruments-Production Data
Internal Memory
Register 1: Flash Memory Address (FMA), offset 0x000
During a write operation, this register contains a 4-byte-aligned address and specifies where the
data is written. During erase operations, this register contains a 1 KB-aligned CPU byte address
and specifies which block is erased. Note that the alignment requirements must be met by software
or the results of the operation are unpredictable.
Flash Memory Address (FMA)
Base 0x400F.D000
Offset 0x000
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
25
24
23
22
21
20
19
18
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
17
16
OFFSET
OFFSET
Type
Reset
Bit/Field
Name
Type
Reset
Description
31:19
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
18:0
OFFSET
R/W
0x0
Address Offset
Address offset in Flash memory where operation is performed, except
for nonvolatile registers (see “Nonvolatile Register
Programming” on page 297 for details on values for this field).
300
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 2: Flash Memory Data (FMD), offset 0x004
This register contains the data to be written during the programming cycle or read during the read
cycle. Note that the contents of this register are undefined for a read access of an execute-only
block. This register is not used during erase cycles.
Flash Memory Data (FMD)
Base 0x400F.D000
Offset 0x004
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
DATA
Type
Reset
DATA
Type
Reset
Bit/Field
Name
Type
31:0
DATA
R/W
Reset
Description
0x0000.0000 Data Value
Data value for write operation.
July 25, 2011
301
Texas Instruments-Production Data
Internal Memory
Register 3: Flash Memory Control (FMC), offset 0x008
When this register is written, the Flash memory controller initiates the appropriate access cycle for
the location specified by the Flash Memory Address (FMA) register (see page 300). If the access
is a write access, the data contained in the Flash Memory Data (FMD) register (see page 301) is
written to the specified address.
This register must be the final register written and initiates the memory operation. The four control
bits in the lower byte of this register are used to initiate memory operations.
Care must be taken not to set multiple control bits as the results of such an operation are
unpredictable.
Caution – If any of bits [15:4] are written to 1, the device may become inoperable. These bits should
always be written to 0. In all registers, the value of a reserved bit should be preserved across a
read-modify-write operation.
Flash Memory Control (FMC)
Base 0x400F.D000
Offset 0x008
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
COMT
MERASE
ERASE
WRITE
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
WRKEY
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:16
WRKEY
WO
0x0000
Description
Flash Memory Write Key
This field contains a write key, which is used to minimize the incidence
of accidental Flash memory writes. The value 0xA442 must be written
into this field for a Flash memory write to occur. Writes to the FMC
register without this WRKEY value are ignored. A read of this field returns
the value 0.
15:4
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
302
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
3
COMT
R/W
0
Description
Commit Register Value
This bit is used to commit writes to Flash-memory-resident registers
and to monitor the progress of that process.
Value Description
1
Set this bit to commit (write) the register value to a
Flash-memory-resident register.
When read, a 1 indicates that the previous commit access is
not complete.
0
A write of 0 has no effect on the state of this bit.
When read, a 0 indicates that the previous commit access is
complete.
See “Nonvolatile Register Programming” on page 297 for more information
on programming Flash-memory-resident registers.
2
MERASE
R/W
0
Mass Erase Flash Memory
This bit is used to mass erase the Flash main memory and to monitor
the progress of that process.
Value Description
1
Set this bit to erase the Flash main memory.
When read, a 1 indicates that the previous mass erase access
is not complete.
0
A write of 0 has no effect on the state of this bit.
When read, a 0 indicates that the previous mass erase access
is complete.
For information on erase time, see “Flash Memory ” on page 795.
1
ERASE
R/W
0
Erase a Page of Flash Memory
This bit is used to erase a page of Flash memory and to monitor the
progress of that process.
Value Description
1
Set this bit to erase the Flash memory page specified by the
contents of the FMA register.
When read, a 1 indicates that the previous page erase access
is not complete.
0
A write of 0 has no effect on the state of this bit.
When read, a 0 indicates that the previous page erase access
is complete.
For information on erase time, see “Flash Memory ” on page 795.
July 25, 2011
303
Texas Instruments-Production Data
Internal Memory
Bit/Field
Name
Type
Reset
0
WRITE
R/W
0
Description
Write a Word into Flash Memory
This bit is used to write a word into Flash memory and to monitor the
progress of that process.
Value Description
1
Set this bit to write the data stored in the FMD register into the
Flash memory location specified by the contents of the FMA
register.
When read, a 1 indicates that the write update access is not
complete.
0
A write of 0 has no effect on the state of this bit.
When read, a 0 indicates that the previous write update access
is complete.
For information on programming time, see “Flash Memory ” on page 795.
304
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 4: Flash Controller Raw Interrupt Status (FCRIS), offset 0x00C
This register indicates that the Flash memory controller has an interrupt condition. An interrupt is
sent to the interrupt controller only if the corresponding FCIM register bit is set.
Flash Controller Raw Interrupt Status (FCRIS)
Base 0x400F.D000
Offset 0x00C
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
PRIS
ARIS
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:2
reserved
RO
0x0000.000
1
PRIS
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Programming Raw Interrupt Status
This bit provides status on programming cycles which are write or erase
actions generated through the FMC or FMC2 register bits (see page 302
and page 308).
Value Description
1
The programming or erase cycle has completed.
0
The programming or erase cycle has not completed.
This status is sent to the interrupt controller when the PMASK bit in the
FCIM register is set.
This bit is cleared by writing a 1 to the PMISC bit in the FCMISC register.
0
ARIS
RO
0
Access Raw Interrupt Status
Value Description
1
A program or erase action was attempted on a block of Flash
memory that contradicts the protection policy for that block as
set in the FMPPEn registers.
0
No access has tried to improperly program or erase the Flash
memory.
This status is sent to the interrupt controller when the AMASK bit in the
FCIM register is set.
This bit is cleared by writing a 1 to the AMISC bit in the FCMISC register.
July 25, 2011
305
Texas Instruments-Production Data
Internal Memory
Register 5: Flash Controller Interrupt Mask (FCIM), offset 0x010
This register controls whether the Flash memory controller generates interrupts to the controller.
Flash Controller Interrupt Mask (FCIM)
Base 0x400F.D000
Offset 0x010
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
PMASK
AMASK
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:2
reserved
RO
0x0000.000
1
PMASK
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Programming Interrupt Mask
This bit controls the reporting of the programming raw interrupt status
to the interrupt controller.
Value Description
0
AMASK
R/W
0
1
An interrupt is sent to the interrupt controller when the PRIS bit
is set.
0
The PRIS interrupt is suppressed and not sent to the interrupt
controller.
Access Interrupt Mask
This bit controls the reporting of the access raw interrupt status to the
interrupt controller.
Value Description
1
An interrupt is sent to the interrupt controller when the ARIS bit
is set.
0
The ARIS interrupt is suppressed and not sent to the interrupt
controller.
306
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 6: Flash Controller Masked Interrupt Status and Clear (FCMISC),
offset 0x014
This register provides two functions. First, it reports the cause of an interrupt by indicating which
interrupt source or sources are signalling the interrupt. Second, it serves as the method to clear the
interrupt reporting.
Flash Controller Masked Interrupt Status and Clear (FCMISC)
Base 0x400F.D000
Offset 0x014
Type R/W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:2
reserved
RO
0x0000.000
1
PMISC
R/W1C
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
1
0
PMISC
AMISC
R/W1C
0
R/W1C
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Programming Masked Interrupt Status and Clear
Value Description
1
When read, a 1 indicates that an unmasked interrupt was
signaled because a programming cycle completed.
Writing a 1 to this bit clears PMISC and also the PRIS bit in the
FCRIS register (see page 305).
0
When read, a 0 indicates that a programming cycle complete
interrupt has not occurred.
A write of 0 has no effect on the state of this bit.
0
AMISC
R/W1C
0
Access Masked Interrupt Status and Clear
Value Description
1
When read, a 1 indicates that an unmasked interrupt was
signaled because a program or erase action was attempted on
a block of Flash memory that contradicts the protection policy
for that block as set in the FMPPEn registers.
Writing a 1 to this bit clears AMISC and also the ARIS bit in the
FCRIS register (see page 305).
0
When read, a 0 indicates that no improper accesses have
occurred.
A write of 0 has no effect on the state of this bit.
July 25, 2011
307
Texas Instruments-Production Data
Internal Memory
Register 7: Flash Memory Control 2 (FMC2), offset 0x020
When this register is written, the Flash memory controller initiates the appropriate access cycle for
the location specified by the Flash Memory Address (FMA) register (see page 300). If the access
is a write access, the data contained in the Flash Write Buffer (FWB) registers is written.
This register must be the final register written as it initiates the memory operation.
Flash Memory Control 2 (FMC2)
Base 0x400F.D000
Offset 0x020
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
8
7
6
5
4
3
2
1
WRKEY
Type
Reset
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
15
14
13
12
11
10
9
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:16
WRKEY
WO
0x0000
RO
0
0
WRBUF
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
Description
Flash Memory Write Key
This field contains a write key, which is used to minimize the incidence
of accidental Flash memory writes. The value 0xA442 must be written
into this field for a write to occur. Writes to the FMC2 register without
this WRKEY value are ignored. A read of this field returns the value 0.
15:1
reserved
RO
0x000
0
WRBUF
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Buffered Flash Memory Write
This bit is used to start a buffered write to Flash memory.
Value Description
1
Set this bit to write the data stored in the FWBn registers to the
location specified by the contents of the FMA register.
When read, a 1 indicates that the previous buffered Flash
memory write access is not complete.
0
A write of 0 has no effect on the state of this bit.
When read, a 0 indicates that the previous buffered Flash
memory write access is complete.
For information on programming time, see “Flash Memory ” on page 795.
308
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 8: Flash Write Buffer Valid (FWBVAL), offset 0x030
This register provides a bitwise status of which FWBn registers have been written by the processor
since the last write of the Flash memory write buffer. The entries with a 1 are written on the next
write of the Flash memory write buffer. This register is cleared after the write operation by hardware.
A protection violation on the write operation also clears this status.
Software can program the same 32 words to various Flash memory locations by setting the FWB[n]
bits after they are cleared by the write operation. The next write operation then uses the same data
as the previous one. In addition, if a FWBn register change should not be written to Flash memory,
software can clear the corresponding FWB[n] bit to preserve the existing data when the next write
operation occurs.
Flash Write Buffer Valid (FWBVAL)
Base 0x400F.D000
Offset 0x030
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
FWB[n]
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
FWB[n]
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
31:0
FWB[n]
R/W
0x0
R/W
0
Description
Flash Memory Write Buffer
Value Description
1
The corresponding FWBn register has been updated since the
last buffer write operation and is ready to be written to Flash
memory.
0
The corresponding FWBn register has no new data to be written.
Bit 0 corresponds to FWB0, offset 0x100, and bit 31 corresponds to
FWB31, offset 0x13C.
July 25, 2011
309
Texas Instruments-Production Data
Internal Memory
Register 9: Flash Control (FCTL), offset 0x0F8
This register is used to ensure that the microcontroller is powered down in a controlled fashion in
systems where power is cycled more frequently than once every five minutes. The USDREQ bit
should be set to indicate that power is going to be turned off. Software should poll the USDACK bit
to determine when it is acceptable to power down.
Note that this power-down process is not required if the microcontroller enters hibernation mode
prior to power being removed.
Flash Control (FCTL)
Base 0x400F.D000
Offset 0x0F8
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
1
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:2
reserved
RO
0x0000.000
1
USDACK
RO
0
USDACK USDREQ
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
User Shut Down Acknowledge
Value Description
1
The microcontroller can be powered down.
0
The microcontroller cannot yet be powered down.
This bit should be set within 50 ms of setting the USDREQ bit.
0
USDREQ
R/W
0
User Shut Down Request
Value Description
1
Requests permission to power down the microcontroller.
0
No effect.
310
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 10: Flash Write Buffer n (FWBn), offset 0x100 - 0x17C
These 32 registers hold the contents of the data to be written into the Flash memory on a buffered
Flash memory write operation. The offset selects one of the 32-bit registers. Only FWBn registers
that have been updated since the preceding buffered Flash memory write operation are written into
the Flash memory, so it is not necessary to write the entire bank of registers in order to write 1 or
2 words. The FWBn registers are written into the Flash memory with the FWB0 register corresponding
to the address contained in FMA. FWB1 is written to the address FMA+0x4 etc. Note that only data
bits that are 0 result in the Flash memory being modified. A data bit that is 1 leaves the content of
the Flash memory bit at its previous value.
Flash Write Buffer n (FWBn)
Base 0x400F.D000
Offset 0x100 - 0x17C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
DATA
Type
Reset
DATA
Type
Reset
Bit/Field
Name
Type
31:0
DATA
R/W
Reset
Description
0x0000.0000 Data
Data to be written into the Flash memory.
7.5
Memory Register Descriptions (System Control Offset)
The remainder of this section lists and describes the registers that reside in the System Control
address space, in numerical order by address offset. Registers in this section are relative to the
System Control base address of 0x400F.E000.
July 25, 2011
311
Texas Instruments-Production Data
Internal Memory
Register 11: ROM Control (RMCTL), offset 0x0F0
This register provides control of the ROM controller state. This register offset is relative to the System
Control base address of 0x400F.E000.
At reset, the ROM is mapped over the Flash memory so that the ROM boot sequence is always
executed. The boot sequence executed from ROM is as follows:
1. The BA bit (below) is cleared such that ROM is mapped to 0x01xx.xxxx and Flash memory is
mapped to address 0x0.
2. The BOOTCFG register is read. If the EN bit is clear, the status of the specified GPIO pin is
compared with the specified polarity. If the status matches the specified polarity, the ROM is
mapped to address 0x0000.0000 and execution continues out of the ROM Boot Loader.
3. If the status doesn't match the specified polarity, the data at address 0x0000.0004 is read, and
if the data at this address is 0xFFFF.FFFF, the ROM is mapped to address 0x0000.0000 and
execution continues out of the ROM Boot Loader.
4. If there is data at address 0x0000.0004 that is not 0xFFFF.FFFF, the stack pointer (SP) is loaded
from Flash memory at address 0x0000.0000 and the program counter (PC) is loaded from
address 0x0000.0004. The user application begins executing.
ROM Control (RMCTL)
Base 0x400F.E000
Offset 0x0F0
Type R/W1C, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:1
reserved
RO
0x0000.000
0
BA
R/W1C
1
RO
0
0
BA
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W1C
1
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Boot Alias
Value Description
1
The microcontroller's ROM appears at address 0x0.
0
The Flash memory is at address 0x0.
This bit is cleared by writing a 1 to this bit position.
312
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 12: Flash Memory Protection Read Enable 0 (FMPRE0), offset 0x130
and 0x200
Note:
This register is aliased for backwards compatability.
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the read-only protection bits for each 2-KB flash block (FMPPEn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPREn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. For
additional information, see the "Flash Memory Protection" section.
Flash Memory Protection Read Enable 0 (FMPRE0)
Base 0x400F.E000
Offset 0x130 and 0x200
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
31:0
READ_ENABLE
R/W
R/W
1
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Read Enable
Configures 2-KB flash blocks to be read or executed only. The policies
may be combined as shown in the table “Flash Protection Policy
Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory up to the total of 64 KB.
July 25, 2011
313
Texas Instruments-Production Data
Internal Memory
Register 13: Flash Memory Protection Program Enable 0 (FMPPE0), offset
0x134 and 0x400
Note:
This register is aliased for backwards compatability.
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the execute-only protection bits for each 2-KB flash block (FMPREn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPPEn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. For
additional information, see the "Flash Memory Protection" section.
Flash Memory Protection Program Enable 0 (FMPPE0)
Base 0x400F.E000
Offset 0x134 and 0x400
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
PROG_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
PROG_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
31:0
PROG_ENABLE
R/W
R/W
1
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Programming Enable
Configures 2-KB flash blocks to be execute only. The policies may be
combined as shown in the table “Flash Protection Policy Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory up to the total of 64 KB.
314
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 14: Boot Configuration (BOOTCFG), offset 0x1D0
Note:
Offset is relative to System Control base address of 0x400FE000.
This register provides configuration of a GPIO pin to enable the ROM Boot Loader as well as a
write-once mechanism to disable external debugger access to the device. Upon reset, the user has
the opportunity to direct the core to execute the ROM Boot Loader or the application in Flash memory
by using any GPIO signal from Ports A-H as configured by the bits in this register. If the EN bit is
set or the specified pin does not have the required polarity, the system control module checks
address 0x000.0004 to see if the Flash memory has a valid reset vector. If the data at address
0x0000.0004 is 0xFFFF.FFFF, then it is assumed that the Flash memory has not yet been
programmed, and the core executes the ROM Boot Loader. The DBG0 bit (bit 0) is set to 0 from
the factory and the DBG1 bit (bit 1) is set to 1, which enables external debuggers. Clearing the
DBG1 bit disables any external debugger access to the device permanently, starting with the next
power-up cycle of the device. The NW bit (bit 31) indicates that the register has not yet been
committed and is controlled through hardware to ensure that the register is only committed once.
Prior to being committed, bits can only be changed from 1 to 0. The reset value shown only applies
to power-on reset; any other type of reset does not affect this register. The only way to restore the
factory default value of this register is to perform the "Recover Locked Device" sequence detailed
in the JTAG chapter.
Boot Configuration (BOOTCFG)
Base 0x400F.E000
Offset 0x1D0
Type R/W, reset 0xFFFF.FFFE
31
30
29
28
27
26
25
24
NW
Type
Reset
R/W
1
15
RO
1
RO
1
RO
1
14
13
12
PORT
Type
Reset
R/W
1
23
22
21
20
19
18
17
16
RO
1
RO
1
reserved
R/W
1
RO
1
RO
1
11
10
PIN
R/W
1
R/W
1
R/W
1
R/W
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
7
6
5
4
3
2
9
8
POL
EN
R/W
1
R/W
1
reserved
RO
1
Bit/Field
Name
Type
Reset
Description
31
NW
R/W
1
Not Written
RO
1
RO
1
RO
1
RO
1
RO
1
1
0
DBG1
DBG0
R/W
1
R/W
0
When set, this bit indicates that this 32-bit register has not been
committed. When clear, this bit specifies that this register has been
committed and may not be committed again.
30:16
reserved
RO
0x7FFF
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
315
Texas Instruments-Production Data
Internal Memory
Bit/Field
Name
Type
Reset
15:13
PORT
R/W
0x7
Description
Boot GPIO Port
This field selects the port of the GPIO port pin that enables the ROM
boot loader at reset.
Value Description
12:10
PIN
R/W
0x7
0x0
Port A
0x1
Port B
0x2
Port C
0x3
Port D
0x4
Port E
0x5
Port F
0x6
Port G
0x7
Port H
Boot GPIO Pin
This field selects the pin number of the GPIO port pin that enables the
ROM boot loader at reset.
Value Description
9
POL
R/W
0x1
0x0
Pin 0
0x1
Pin 1
0x2
Pin 2
0x3
Pin 3
0x4
Pin 4
0x5
Pin 5
0x6
Pin 6
0x7
Pin 7
Boot GPIO Polarity
When set, this bit selects a high level for the GPIO port pin to enable
the ROM boot loader at reset. When clear, this bit selects a low level
for the GPIO port pin.
8
EN
R/W
0x1
Boot GPIO Enable
Clearing this bit enables the use of a GPIO pin to enable the ROM Boot
Loader at reset. When this bit is set, the contents of address
0x0000.0004 are checked to see if the Flash memory has been
programmed. If the contents are not 0xFFFF.FFFF, the core executes
out of Flash memory. If the Flash has not been programmed, the core
executes out of ROM.
7:2
reserved
RO
0x3F
1
DBG1
R/W
1
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Debug Control 1
The DBG1 bit must be 1 and DBG0 must be 0 for debug to be available.
0
DBG0
R/W
0x0
Debug Control 0
The DBG1 bit must be 1 and DBG0 must be 0 for debug to be available.
316
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 15: User Register 0 (USER_REG0), offset 0x1E0
Note:
Offset is relative to System Control base address of 0x400FE000.
This register provides 31 bits of user-defined data that is non-volatile and can only be committed
once. Bit 31 indicates that the register is available to be committed and is controlled through hardware
to ensure that the register is only committed once. Prior to being committed, bits can only be changed
from 1 to 0. The reset value shown only applies to power-on reset; any other type of reset does not
affect this register. The write-once characteristics of this register are useful for keeping static
information like communication addresses that need to be unique per part and would otherwise
require an external EEPROM or other non-volatile device. The only way to restore the factory default
value of this register is to perform the "Recover Locked Device" sequence detailed in the JTAG
section.
User Register 0 (USER_REG0)
Base 0x400F.E000
Offset 0x1E0
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
NW
Type
Reset
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
DATA
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
DATA
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
Reset
Description
31
NW
R/W
1
Not Written
When set, this bit indicates that this 32-bit register has not been
committed. When clear, this bit specifies that this register has been
committed and may not be committed again.
30:0
DATA
R/W
0x7FFFFFFF User Data
Contains the user data value. This field is initialized to all 1s and can
only be committed once.
July 25, 2011
317
Texas Instruments-Production Data
Internal Memory
Register 16: User Register 1 (USER_REG1), offset 0x1E4
Note:
Offset is relative to System Control base address of 0x400FE000.
This register provides 31 bits of user-defined data that is non-volatile and can only be written once.
Bit 31 indicates that the register is available to be written and is controlled through hardware to
ensure that the register is only written once. The write-once characteristics of this register are useful
for keeping static information like communication addresses that need to be unique per part and
would otherwise require an external EEPROM or other non-volatile device.
User Register 1 (USER_REG1)
Base 0x400F.E000
Offset 0x1E4
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
NW
Type
Reset
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
DATA
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
DATA
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
Reset
Description
31
NW
R/W
1
Not Written
When set, this bit indicates that this 32-bit register has not been
committed. When clear, this bit specifies that this register has been
committed and may not be committed again.
30:0
DATA
R/W
0x7FFFFFFF User Data
Contains the user data value. This field is initialized to all 1s and can
only be committed once.
318
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 17: User Register 2 (USER_REG2), offset 0x1E8
Note:
Offset is relative to System Control base address of 0x400FE000.
This register provides 31 bits of user-defined data that is non-volatile and can only be written once.
Bit 31 indicates that the register is available to be written and is controlled through hardware to
ensure that the register is only written once. The write-once characteristics of this register are useful
for keeping static information like communication addresses that need to be unique per part and
would otherwise require an external EEPROM or other non-volatile device.
User Register 2 (USER_REG2)
Base 0x400F.E000
Offset 0x1E8
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
NW
Type
Reset
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
DATA
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
DATA
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
Reset
Description
31
NW
R/W
1
Not Written
When set, this bit indicates that this 32-bit register has not been
committed. When clear, this bit specifies that this register has been
committed and may not be committed again.
30:0
DATA
R/W
0x7FFFFFFF User Data
Contains the user data value. This field is initialized to all 1s and can
only be committed once.
July 25, 2011
319
Texas Instruments-Production Data
Internal Memory
Register 18: User Register 3 (USER_REG3), offset 0x1EC
Note:
Offset is relative to System Control base address of 0x400FE000.
This register provides 31 bits of user-defined data that is non-volatile and can only be written once.
Bit 31 indicates that the register is available to be written and is controlled through hardware to
ensure that the register is only written once. The write-once characteristics of this register are useful
for keeping static information like communication addresses that need to be unique per part and
would otherwise require an external EEPROM or other non-volatile device.
User Register 3 (USER_REG3)
Base 0x400F.E000
Offset 0x1EC
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
NW
Type
Reset
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
DATA
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
DATA
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
Reset
Description
31
NW
R/W
1
Not Written
When set, this bit indicates that this 32-bit register has not been
committed. When clear, this bit specifies that this register has been
committed and may not be committed again.
30:0
DATA
R/W
0x7FFFFFFF User Data
Contains the user data value. This field is initialized to all 1s and can
only be committed once.
320
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 19: Flash Memory Protection Read Enable 1 (FMPRE1), offset 0x204
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the read-only protection bits for each 2-KB flash block (FMPPEn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPREn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 64 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Read Enable 1 (FMPRE1)
Base 0x400F.E000
Offset 0x204
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
31:0
READ_ENABLE
R/W
R/W
1
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Read Enable
Configures 2-KB flash blocks to be read or executed only. The policies
may be combined as shown in the table “Flash Protection Policy
Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory in memory range from 65 to 128 KB.
July 25, 2011
321
Texas Instruments-Production Data
Internal Memory
Register 20: Flash Memory Protection Read Enable 2 (FMPRE2), offset 0x208
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the read-only protection bits for each 2-KB flash block (FMPPEn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPREn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 128 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Read Enable 2 (FMPRE2)
Base 0x400F.E000
Offset 0x208
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
31:0
READ_ENABLE
R/W
R/W
1
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Read Enable
Configures 2-KB flash blocks to be read or executed only. The policies
may be combined as shown in the table “Flash Protection Policy
Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 129 to 192 KB.
322
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 21: Flash Memory Protection Read Enable 3 (FMPRE3), offset 0x20C
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the read-only protection bits for each 2-KB flash block (FMPPEn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPREn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 192 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Read Enable 3 (FMPRE3)
Base 0x400F.E000
Offset 0x20C
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
31:0
READ_ENABLE
R/W
R/W
1
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Read Enable
Configures 2-KB flash blocks to be read or executed only. The policies
may be combined as shown in the table “Flash Protection Policy
Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 193 to 256 KB.
July 25, 2011
323
Texas Instruments-Production Data
Internal Memory
Register 22: Flash Memory Protection Read Enable 4 (FMPRE4), offset 0x210
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the read-only protection bits for each 2-KB flash block (FMPPEn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPREn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 192 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Read Enable 4 (FMPRE4)
Base 0x400F.E000
Offset 0x210
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
31:0
READ_ENABLE
R/W
R/W
1
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Read Enable
Configures 2-KB flash blocks to be read or executed only. The policies
may be combined as shown in the table “Flash Protection Policy
Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 257 to 320 KB.
324
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 23: Flash Memory Protection Read Enable 5 (FMPRE5), offset 0x214
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the read-only protection bits for each 2-KB flash block (FMPPEn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPREn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 192 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Read Enable 5 (FMPRE5)
Base 0x400F.E000
Offset 0x214
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
READ_ENABLE
Type
Reset
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
Bit/Field
Name
Type
31:0
READ_ENABLE
R/W
R/W
1
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Read Enable
Configures 2-KB flash blocks to be read or executed only. The policies
may be combined as shown in the table “Flash Protection Policy
Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 321 to 384 KB.
July 25, 2011
325
Texas Instruments-Production Data
Internal Memory
Register 24: Flash Memory Protection Read Enable 6 (FMPRE6), offset 0x218
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the read-only protection bits for each 2-KB flash block (FMPPEn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPREn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 192 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Read Enable 6 (FMPRE6)
Base 0x400F.E000
Offset 0x218
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
READ_ENABLE
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
READ_ENABLE
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
31:0
READ_ENABLE
R/W
R/W
0
Reset
R/W
0
R/W
0
Description
0x00000000 Flash Read Enable
Configures 2-KB flash blocks to be read or executed only. The policies
may be combined as shown in the table “Flash Protection Policy
Combinations”.
Value
Description
0x00000000 Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 385 to 448 KB.
326
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 25: Flash Memory Protection Read Enable 7 (FMPRE7), offset 0x21C
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the read-only protection bits for each 2-KB flash block (FMPPEn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPREn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 192 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Read Enable 7 (FMPRE7)
Base 0x400F.E000
Offset 0x21C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
READ_ENABLE
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
READ_ENABLE
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
31:0
READ_ENABLE
R/W
R/W
0
Reset
R/W
0
R/W
0
Description
0x00000000 Flash Read Enable
Configures 2-KB flash blocks to be read or executed only. The policies
may be combined as shown in the table “Flash Protection Policy
Combinations”.
Value
Description
0x00000000 Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 449 to 512 KB.
July 25, 2011
327
Texas Instruments-Production Data
Internal Memory
Register 26: Flash Memory Protection Program Enable 1 (FMPPE1), offset
0x404
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the execute-only protection bits for each 2-KB flash block (FMPREn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPPEn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 64 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Program Enable 1 (FMPPE1)
Base 0x400F.E000
Offset 0x404
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
PROG_ENABLE
Type
Reset
PROG_ENABLE
Type
Reset
Bit/Field
Name
Type
31:0
PROG_ENABLE
R/W
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Programming Enable
Configures 2-KB flash blocks to be execute only. The policies may be
combined as shown in the table “Flash Protection Policy Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory in memory range from 65 to 128 KB.
328
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 27: Flash Memory Protection Program Enable 2 (FMPPE2), offset
0x408
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the execute-only protection bits for each 2-KB flash block (FMPREn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPPEn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 128 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Program Enable 2 (FMPPE2)
Base 0x400F.E000
Offset 0x408
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
PROG_ENABLE
Type
Reset
PROG_ENABLE
Type
Reset
Bit/Field
Name
Type
31:0
PROG_ENABLE
R/W
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Programming Enable
Configures 2-KB flash blocks to be execute only. The policies may be
combined as shown in the table “Flash Protection Policy Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 129 to 192 KB.
July 25, 2011
329
Texas Instruments-Production Data
Internal Memory
Register 28: Flash Memory Protection Program Enable 3 (FMPPE3), offset
0x40C
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the execute-only protection bits for each 2-KB flash block (FMPREn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPPEn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 192 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Program Enable 3 (FMPPE3)
Base 0x400F.E000
Offset 0x40C
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
PROG_ENABLE
Type
Reset
PROG_ENABLE
Type
Reset
Bit/Field
Name
Type
31:0
PROG_ENABLE
R/W
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Programming Enable
Configures 2-KB flash blocks to be execute only. The policies may be
combined as shown in the table “Flash Protection Policy Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 193 to 256 KB.
330
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 29: Flash Memory Protection Program Enable 4 (FMPPE4), offset
0x410
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the execute-only protection bits for each 2-KB flash block (FMPREn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPPEn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 192 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Program Enable 4 (FMPPE4)
Base 0x400F.E000
Offset 0x410
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
PROG_ENABLE
Type
Reset
PROG_ENABLE
Type
Reset
Bit/Field
Name
Type
31:0
PROG_ENABLE
R/W
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Programming Enable
Configures 2-KB flash blocks to be execute only. The policies may be
combined as shown in the table “Flash Protection Policy Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 257 to 320 KB.
July 25, 2011
331
Texas Instruments-Production Data
Internal Memory
Register 30: Flash Memory Protection Program Enable 5 (FMPPE5), offset
0x414
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the execute-only protection bits for each 2-KB flash block (FMPREn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPPEn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 192 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Program Enable 5 (FMPPE5)
Base 0x400F.E000
Offset 0x414
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
PROG_ENABLE
Type
Reset
PROG_ENABLE
Type
Reset
Bit/Field
Name
Type
31:0
PROG_ENABLE
R/W
Reset
R/W
1
R/W
1
Description
0xFFFFFFFF Flash Programming Enable
Configures 2-KB flash blocks to be execute only. The policies may be
combined as shown in the table “Flash Protection Policy Combinations”.
Value
Description
0xFFFFFFFF Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 321 to 384 KB.
332
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 31: Flash Memory Protection Program Enable 6 (FMPPE6), offset
0x418
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the execute-only protection bits for each 2-KB flash block (FMPREn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPPEn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 192 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Program Enable 6 (FMPPE6)
Base 0x400F.E000
Offset 0x418
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
PROG_ENABLE
Type
Reset
PROG_ENABLE
Type
Reset
Bit/Field
Name
Type
31:0
PROG_ENABLE
R/W
Reset
R/W
0
R/W
0
Description
0x00000000 Flash Programming Enable
Configures 2-KB flash blocks to be execute only. The policies may be
combined as shown in the table “Flash Protection Policy Combinations”.
Value
Description
0x00000000 Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 385 to 448 KB.
July 25, 2011
333
Texas Instruments-Production Data
Internal Memory
Register 32: Flash Memory Protection Program Enable 7 (FMPPE7), offset
0x41C
Note:
Offset is relative to System Control base address of 0x400FE000.
This register stores the execute-only protection bits for each 2-KB flash block (FMPREn stores the
execute-only bits). Flash memory up to a total of 64 KB is controlled by this register. Other FMPPEn
registers (if any) provide protection for other 64K blocks. This register is loaded during the power-on
reset sequence. The factory settings for the FMPREn and FMPPEn registers are a value of 1 for
all implemented banks. This achieves a policy of open access and programmability. The register
bits may be changed by writing the specific register bit. However, this register is R/W0; the user can
only change the protection bit from a 1 to a 0 (and may NOT change a 0 to a 1). The changes are
not permanent until the register is committed (saved), at which point the bit change is permanent.
If a bit is changed from a 1 to a 0 and not committed, it may be restored by executing a power-on
reset sequence. The reset value shown only applies to power-on reset; any other type of reset does
not affect this register. Once committed, the only way to restore the factory default value of this
register is to perform the "Recover Locked Device" sequence detailed in the JTAG chapter. If the
Flash memory size on the device is less than 192 KB, this register usually reads as zeroes, but
software should not rely on these bits to be zero. For additional information, see the "Flash Memory
Protection" section.
Flash Memory Protection Program Enable 7 (FMPPE7)
Base 0x400F.E000
Offset 0x41C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
PROG_ENABLE
Type
Reset
PROG_ENABLE
Type
Reset
Bit/Field
Name
Type
31:0
PROG_ENABLE
R/W
Reset
R/W
0
R/W
0
Description
0x00000000 Flash Programming Enable
Configures 2-KB flash blocks to be execute only. The policies may be
combined as shown in the table “Flash Protection Policy Combinations”.
Value
Description
0x00000000 Bits [31:0] each enable protection on a 2-KB block of
Flash memory in the range from 449 to 512 KB.
334
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
8
Micro Direct Memory Access (μDMA)
The LM3S1G58 microcontroller includes a Direct Memory Access (DMA) controller, known as
micro-DMA (μDMA). The μDMA controller provides a way to offload data transfer tasks from the
Cortex™-M3 processor, allowing for more efficient use of the processor and the available bus
bandwidth. The μDMA controller can perform transfers between memory and peripherals. It has
dedicated channels for each supported on-chip module and can be programmed to automatically
perform transfers between peripherals and memory as the peripheral is ready to transfer more data.
The μDMA controller provides the following features:
®
®
■ ARM PrimeCell 32-channel configurable µDMA controller
■ Support for memory-to-memory, memory-to-peripheral, and peripheral-to-memory in multiple
transfer modes
– Basic for simple transfer scenarios
– Ping-pong for continuous data flow
– Scatter-gather for a programmable list of arbitrary transfers initiated from a single request
■ Highly flexible and configurable channel operation
– Independently configured and operated channels
– Dedicated channels for supported on-chip modules
– Primary and secondary channel assignments
– One channel each for receive and transmit path for bidirectional modules
– Dedicated channel for software-initiated transfers
– Per-channel configurable priority scheme
– Optional software-initiated requests for any channel
■ Two levels of priority
■ Design optimizations for improved bus access performance between µDMA controller and the
processor core
– µDMA controller access is subordinate to core access
– RAM striping
– Peripheral bus segmentation
■ Data sizes of 8, 16, and 32 bits
■ Transfer size is programmable in binary steps from 1 to 1024
■ Source and destination address increment size of byte, half-word, word, or no increment
■ Maskable peripheral requests
July 25, 2011
335
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
■ Interrupt on transfer completion, with a separate interrupt per channel
8.1
Block Diagram
Figure 8-1. μDMA Block Diagram
uDMA
Controller
DMA error
System Memory
CH Control Table
Peripheral
DMA Channel 0
•
•
•
Peripheral
DMA Channel N-1
Nested
Vectored
Interrupt
Controller
(NVIC)
IRQ
General
Peripheral N
Registers
request
done
request
done
request
done
DMASTAT
DMACFG
DMACTLBASE
DMAALTBASE
DMAWAITSTAT
DMASWREQ
DMAUSEBURSTSET
DMAUSEBURSTCLR
DMAREQMASKSET
DMAREQMASKCLR
DMAENASET
DMAENACLR
DMAALTSET
DMAALTCLR
DMAPRIOSET
DMAPRIOCLR
DMAERRCLR
DMACHASGN
DMACHIS
DMASRCENDP
DMADSTENDP
DMACHCTRL
•
•
•
DMASRCENDP
DMADSTENDP
DMACHCTRL
Transfer Buffers
Used by µDMA
ARM
Cortex-M3
8.2
Functional Description
The μDMA controller is a flexible and highly configurable DMA controller designed to work efficiently
with the microcontroller's Cortex-M3 processor core. It supports multiple data sizes and address
increment schemes, multiple levels of priority among DMA channels, and several transfer modes
to allow for sophisticated programmed data transfers. The μDMA controller's usage of the bus is
always subordinate to the processor core, so it never holds up a bus transaction by the processor.
Because the μDMA controller is only using otherwise-idle bus cycles, the data transfer bandwidth
it provides is essentially free, with no impact on the rest of the system. The bus architecture has
been optimized to greatly enhance the ability of the processor core and the μDMA controller to
efficiently share the on-chip bus, thus improving performance. The optimizations include RAM
striping and peripheral bus segmentation, which in many cases allow both the processor core and
the μDMA controller to access the bus and perform simultaneous data transfers.
The μDMA controller can transfer data to and from the on-chip SRAM. However, because the Flash
memory and ROM are located on a separate internal bus, it is not possible to transfer data from the
Flash memory or ROM with the μDMA controller.
Each peripheral function that is supported has a dedicated channel on the μDMA controller that can
be configured independently. The μDMA controller implements a unique configuration method using
channel control structures that are maintained in system memory by the processor. While simple
transfer modes are supported, it is also possible to build up sophisticated "task" lists in memory that
allow the μDMA controller to perform arbitrary-sized transfers to and from arbitrary locations as part
of a single transfer request. The μDMA controller also supports the use of ping-pong buffering to
accommodate constant streaming of data to or from a peripheral.
336
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Each channel also has a configurable arbitration size. The arbitration size is the number of items
that are transferred in a burst before the μDMA controller rearbitrates for channel priority. Using the
arbitration size, it is possible to control exactly how many items are transferred to or from a peripheral
each time it makes a μDMA service request.
8.2.1
Channel Assignments
μDMA channels 0-31 are assigned to peripherals according to the following table. The DMA Channel
Assignment (DMACHASGN) register (see page 384) can be used to specify the primary or secondary
assignment. If the primary function is not available on this microcontroller, the secondary function
becomes the primary function. If the secondary function is not available, the primary function is the
only option.
Note:
Channels noted in the table as "Available for software" may be assigned to peripherals in
the future. However, they are currently available for software use. Channel 30 is dedicated
for software use.
Because of the way the μDMA controller interacts with peripherals, the μDMA channel for
the peripheral must be enabled in order for the μDMA controller to be able to read and write
the peripheral registers, even if a different μDMA channel is used to perform the μDMA
transfer. To minimize confusion and chance of software errors, it is best practice to use a
peripheral's μDMA channel for performing all μDMA transfers for that peripheral, even if it
is processor-triggered and using AUTO mode, which could be considered a software transfer.
Note that if the software channel is used, interrupts occur on the dedicated μDMA interrupt
vector. If the peripheral channel is used, then the interrupt occurs on the interrupt vector
for the peripheral.
Table 8-1. μDMA Channel Assignments
μDMA Channel
Primary Assignment
Secondary Assignment
0
Available for software
UART2 Receive
1
Available for software
UART2 Transmit
2
Available for software
General-Purpose Timer 3A
3
Available for software
General-Purpose Timer 3B
4
Available for software
General-Purpose Timer 2A
5
Available for software
General-Purpose Timer 2B
6
Available for software
General-Purpose Timer 2A
7
Available for software
General-Purpose Timer 2B
8
UART0 Receive
UART1 Receive
9
UART0 Transmit
UART1 Transmit
10
SSI0 Receive
SSI1 Receive
11
SSI0 Transmit
SSI1 Transmit
12
Available for software
UART2 Receive
13
Available for software
UART2 Transmit
14
ADC0 Sample Sequencer 0
General-Purpose Timer 2A
15
ADC0 Sample Sequencer 1
General-Purpose Timer 2B
16
ADC0 Sample Sequencer 2
Available for software
17
ADC0 Sample Sequencer 3
Available for software
18
General-Purpose Timer 0A
General-Purpose Timer 1A
19
General-Purpose Timer 0B
General-Purpose Timer 1B
July 25, 2011
337
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Table 8-1. μDMA Channel Assignments (continued)
μDMA Channel
8.2.2
Primary Assignment
Secondary Assignment
20
General-Purpose Timer 1A
Available for software
21
General-Purpose Timer 1B
Available for software
22
UART1 Receive
Available for software
23
UART1 Transmit
Available for software
24
SSI1 Receive
ADC1 Sample Sequencer 0
25
SSI1 Transmit
ADC1 Sample Sequencer 1
26
Available for software
ADC1 Sample Sequencer 2
27
Available for software
ADC1 Sample Sequencer 3
28
Available for software
Available for software
29
Available for software
Available for software
30
Dedicated for software use
31
Reserved
Priority
The μDMA controller assigns priority to each channel based on the channel number and the priority
level bit for the channel. Channel number 0 has the highest priority and as the channel number
increases, the priority of a channel decreases. Each channel has a priority level bit to provide two
levels of priority: default priority and high priority. If the priority level bit is set, then that channel has
higher priority than all other channels at default priority. If multiple channels are set for high priority,
then the channel number is used to determine relative priority among all the high priority channels.
The priority bit for a channel can be set using the DMA Channel Priority Set (DMAPRIOSET)
register and cleared with the DMA Channel Priority Clear (DMAPRIOCLR) register.
8.2.3
Arbitration Size
When a μDMA channel requests a transfer, the μDMA controller arbitrates among all the channels
making a request and services the μDMA channel with the highest priority. Once a transfer begins,
it continues for a selectable number of transfers before rearbitrating among the requesting channels
again. The arbitration size can be configured for each channel, ranging from 1 to 1024 item transfers.
After the μDMA controller transfers the number of items specified by the arbitration size, it then
checks among all the channels making a request and services the channel with the highest priority.
If a lower priority μDMA channel uses a large arbitration size, the latency for higher priority channels
is increased because the μDMA controller completes the lower priority burst before checking for
higher priority requests. Therefore, lower priority channels should not use a large arbitration size
for best response on high priority channels.
The arbitration size can also be thought of as a burst size. It is the maximum number of items that
are transferred at any one time in a burst. Here, the term arbitration refers to determination of μDMA
channel priority, not arbitration for the bus. When the μDMA controller arbitrates for the bus, the
processor always takes priority. Furthermore, the μDMA controller is held off whenever the processor
must perform a bus transaction on the same bus, even in the middle of a burst transfer.
8.2.4
Request Types
The μDMA controller responds to two types of requests from a peripheral: single or burst. Each
peripheral may support either or both types of requests. A single request means that the peripheral
338
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
is ready to transfer one item, while a burst request means that the peripheral is ready to transfer
multiple items.
The μDMA controller responds differently depending on whether the peripheral is making a single
request or a burst request. If both are asserted, and the μDMA channel has been set up for a burst
transfer, then the burst request takes precedence. See Table 8-2 on page 339, which shows how
each peripheral supports the two request types.
Table 8-2. Request Type Support
8.2.4.1
Peripheral
Single Request Signal
Burst Request Signal
ADC
None
Sequencer IE bit
General-Purpose Timer
Raw interrupt pulse
None
SSI TX
TX FIFO Not Full
TX FIFO Level (fixed at 4)
SSI RX
RX FIFO Not Empty
RX FIFO Level (fixed at 4)
UART TX
TX FIFO Not Full
TX FIFO Level (configurable)
UART RX
RX FIFO Not Empty
RX FIFO Level (configurable)
Single Request
When a single request is detected, and not a burst request, the μDMA controller transfers one item
and then stops to wait for another request.
8.2.4.2
Burst Request
When a burst request is detected, the μDMA controller transfers the number of items that is the
lesser of the arbitration size or the number of items remaining in the transfer. Therefore, the arbitration
size should be the same as the number of data items that the peripheral can accommodate when
making a burst request. For example, the UART generates a burst request based on the FIFO trigger
level. In this case, the arbitration size should be set to the amount of data that the FIFO can transfer
when the trigger level is reached. A burst transfer runs to completion once it is started, and cannot
be interrupted, even by a higher priority channel. Burst transfers complete in a shorter time than the
same number of non-burst transfers.
It may be desirable to use only burst transfers and not allow single transfers. For example, perhaps
the nature of the data is such that it only makes sense when transferred together as a single unit
rather than one piece at a time. The single request can be disabled by using the DMA Channel
Useburst Set (DMAUSEBURSTSET) register. By setting the bit for a channel in this register, the
μDMA controller only responds to burst requests for that channel.
8.2.5
Channel Configuration
The μDMA controller uses an area of system memory to store a set of channel control structures
in a table. The control table may have one or two entries for each μDMA channel. Each entry in the
table structure contains source and destination pointers, transfer size, and transfer mode. The
control table can be located anywhere in system memory, but it must be contiguous and aligned on
a 1024-byte boundary.
Table 8-3 on page 340 shows the layout in memory of the channel control table. Each channel may
have one or two control structures in the control table: a primary control structure and an optional
alternate control structure. The table is organized so that all of the primary entries are in the first
half of the table, and all the alternate structures are in the second half of the table. The primary entry
is used for simple transfer modes where transfers can be reconfigured and restarted after each
transfer is complete. In this case, the alternate control structures are not used and therefore only
the first half of the table must be allocated in memory; the second half of the control table is not
July 25, 2011
339
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
necessary, and that memory can be used for something else. If a more complex transfer mode is
used such as ping-pong or scatter-gather, then the alternate control structure is also used and
memory space should be allocated for the entire table.
Any unused memory in the control table may be used by the application. This includes the control
structures for any channels that are unused by the application as well as the unused control word
for each channel.
Table 8-3. Control Structure Memory Map
Offset
Channel
0x0
0, Primary
0x10
1, Primary
...
...
0x1F0
31, Primary
0x200
0, Alternate
0x210
1, Alternate
...
0x3F0
...
31, Alternate
Table 8-4 shows an individual control structure entry in the control table. Each entry is aligned on
a 16-byte boundary. The entry contains four long words: the source end pointer, the destination end
pointer, the control word, and an unused entry. The end pointers point to the ending address of the
transfer and are inclusive. If the source or destination is non-incrementing (as for a peripheral
register), then the pointer should point to the transfer address.
Table 8-4. Channel Control Structure
Offset
Description
0x000
Source End Pointer
0x004
Destination End Pointer
0x008
Control Word
0x00C
Unused
The control word contains the following fields:
■ Source and destination data sizes
■ Source and destination address increment size
■ Number of transfers before bus arbitration
■ Total number of items to transfer
■ Useburst flag
■ Transfer mode
The control word and each field are described in detail in “μDMA Channel Control
Structure” on page 358. The μDMA controller updates the transfer size and transfer mode fields as
the transfer is performed. At the end of a transfer, the transfer size indicates 0, and the transfer
mode indicates "stopped." Because the control word is modified by the μDMA controller, it must be
340
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
reconfigured before each new transfer. The source and destination end pointers are not modified,
so they can be left unchanged if the source or destination addresses remain the same.
Prior to starting a transfer, a μDMA channel must be enabled by setting the appropriate bit in the
DMA Channel Enable Set (DMAENASET) register. A channel can be disabled by setting the
channel bit in the DMA Channel Enable Clear (DMAENACLR) register. At the end of a complete
μDMA transfer, the controller automatically disables the channel.
8.2.6
Transfer Modes
The μDMA controller supports several transfer modes. Two of the modes support simple one-time
transfers. Several complex modes support a continuous flow of data.
8.2.6.1
Stop Mode
While Stop is not actually a transfer mode, it is a valid value for the mode field of the control word.
When the mode field has this value, the μDMA controller does not perform any transfers and disables
the channel if it is enabled. At the end of a transfer, the μDMA controller updates the control word
to set the mode to Stop.
8.2.6.2
Basic Mode
In Basic mode, the μDMA controller performs transfers as long as there are more items to transfer,
and a transfer request is present. This mode is used with peripherals that assert a μDMA request
signal whenever the peripheral is ready for a data transfer. Basic mode should not be used in any
situation where the request is momentary even though the entire transfer should be completed. For
example, a software-initiated transfer creates a momentary request, and in Basic mode, only the
number of transfers specified by the ARBSIZE field in the DMA Channel Control Word (DMACHCTL)
register is transferred on a software request, even if there is more data to transfer.
When all of the items have been transferred using Basic mode, the μDMA controller sets the mode
for that channel to Stop.
8.2.6.3
Auto Mode
Auto mode is similar to Basic mode, except that once a transfer request is received, the transfer
runs to completion, even if the μDMA request is removed. This mode is suitable for software-triggered
transfers. Generally, Auto mode is not used with a peripheral.
When all the items have been transferred using Auto mode, the μDMA controller sets the mode for
that channel to Stop.
8.2.6.4
Ping-Pong
Ping-Pong mode is used to support a continuous data flow to or from a peripheral. To use Ping-Pong
mode, both the primary and alternate data structures must be implemented. Both structures are set
up by the processor for data transfer between memory and a peripheral. The transfer is started
using the primary control structure. When the transfer using the primary control structure is complete,
the μDMA controller reads the alternate control structure for that channel to continue the transfer.
Each time this happens, an interrupt is generated, and the processor can reload the control structure
for the just-completed transfer. Data flow can continue indefinitely this way, using the primary and
alternate control structures to switch back and forth between buffers as the data flows to or from
the peripheral.
Refer to Figure 8-2 on page 342 for an example showing operation in Ping-Pong mode.
July 25, 2011
341
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Figure 8-2. Example of Ping-Pong μDMA Transaction
µDMA Controller
SOURCE
DEST
CONTROL
Unused
transfers using BUFFER A
transfer continues using alternate
Primary Structure
Cortex-M3 Processor
SOURCE
DEST
CONTROL
Unused
Pe
rip
he
ral
/µD
M
AI
nte
Time
transfers using BUFFER B
SOURCE
DEST
CONTROL
Unused
Alternate Structure
8.2.6.5
SOURCE
DEST
CONTROL
Unused
BUFFER B
· Process data in BUFFER A
· Reload primary structure
Pe
rip
he
ral
/µD
M
AI
nte
r
transfers using BUFFER A
rup
t
BUFFER A
· Process data in BUFFER B
· Reload alternate structure
transfer continues using alternate
Primary Structure
rru
p
t
transfer continues using primary
Alternate Structure
BUFFER A
Pe
rip
he
ral
/µD
M
AI
nte
transfers using BUFFER B
rru
pt
BUFFER B
· Process data in BUFFER B
· Reload alternate structure
Memory Scatter-Gather
Memory Scatter-Gather mode is a complex mode used when data must be transferred to or from
varied locations in memory instead of a set of contiguous locations in a memory buffer. For example,
a gather μDMA operation could be used to selectively read the payload of several stored packets
of a communication protocol and store them together in sequence in a memory buffer.
342
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
In Memory Scatter-Gather mode, the primary control structure is used to program the alternate
control structure from a table in memory. The table is set up by the processor software and contains
a list of control structures, each containing the source and destination end pointers, and the control
word for a specific transfer. The mode of each control word must be set to Scatter-Gather mode.
Each entry in the table is copied in turn to the alternate structure where it is then executed. The
μDMA controller alternates between using the primary control structure to copy the next transfer
instruction from the list and then executing the new transfer instruction. The end of the list is marked
by programming the control word for the last entry to use Auto transfer mode. Once the last transfer
is performed using Auto mode, the μDMA controller stops. A completion interrupt is generated only
after the last transfer. It is possible to loop the list by having the last entry copy the primary control
structure to point back to the beginning of the list (or to a new list). It is also possible to trigger a set
of other channels to perform a transfer, either directly, by programming a write to the software trigger
for another channel, or indirectly, by causing a peripheral action that results in a μDMA request.
By programming the μDMA controller using this method, a set of arbitrary transfers can be performed
based on a single μDMA request.
Refer to Figure 8-3 on page 344 and Figure 8-4 on page 345, which show an example of operation
in Memory Scatter-Gather mode. This example shows a gather operation, where data in three
separate buffers in memory is copied together into one buffer. Figure 8-3 on page 344 shows how
the application sets up a μDMA task list in memory that is used by the controller to perform three
sets of copy operations from different locations in memory. The primary control structure for the
channel that is used for the operation is configured to copy from the task list to the alternate control
structure.
Figure 8-4 on page 345 shows the sequence as the μDMA controller performs the three sets of copy
operations. First, using the primary control structure, the μDMA controller loads the alternate control
structure with task A. It then performs the copy operation specified by task A, copying the data from
the source buffer A to the destination buffer. Next, the μDMA controller again uses the primary
control structure to load task B into the alternate control structure, and then performs the B operation
with the alternate control structure. The process is repeated for task C.
July 25, 2011
343
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Figure 8-3. Memory Scatter-Gather, Setup and Configuration
1
2
3
Source and Destination
Buffer in Memory
Task List in Memory
Channel Control
Table in Memory
4 WORDS (SRC A)
SRC
A
DST
ITEMS=4
16 WORDS (SRC B)
SRC
Unused
DST
SRC
ITEMS=12
DST
B
“TASK” A
ITEMS=16
Channel Primary
Control Structure
“TASK” B
Unused
SRC
DST
ITEMS=1
“TASK” C
Unused
SRC
DST
Channel Alternate
Control Structure
ITEMS=n
1 WORD (SRC C)
C
4 (DEST A)
16 (DEST B)
1 (DEST C)
NOTES:
1. Application has a need to copy data items from three separate locations in memory into one combined buffer.
2. Application sets up µDMA “task list” in memory, which contains the pointers and control configuration for three
µDMA copy “tasks.”
3. Application sets up the channel primary control structure to copy each task configuration, one at a time, to the
alternate control structure, where it is executed by the µDMA controller.
344
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 8-4. Memory Scatter-Gather, μDMA Copy Sequence
Task List
in Memory
Buffers
in Memory
µDMA Control Table
in Memory
SRC A
SRC
SRC B
PRI
COPIED
DST
TASK A
TASK B
SRC
SRC C
ALT
COPIED
DST
TASK C
DEST A
DEST B
DEST C
Then, using the channel’s alternate control structure, the
µDMA controller copies data from the source buffer A to
the destination buffer.
Using the channel’s primary control structure, the µDMA
controller copies task A configuration to the channel’s
alternate control structure.
Task List
in Memory
Buffers
in Memory
µDMA Control Table
in Memory
SRC A
SRC B
SRC
PRI
DST
TASK A
SRC
TASK B
TASK C
SRC C
COPIED
ALT
COPIED
DST
DEST A
DEST B
DEST C
Then, using the channel’s alternate control structure, the
µDMA controller copies data from the source buffer B to
the destination buffer.
Using the channel’s primary control structure, the µDMA
controller copies task B configuration to the channel’s
alternate control structure.
Task List
in Memory
Buffers
in Memory
µDMA Control Table
in Memory
SRC A
SRC
SRC B
PRI
DST
TASK A
SRC
TASK B
TASK C
SRC C
ALT
DST
DEST A
COPIED
COPIED
DEST B
DEST C
Using the channel’s primary control structure, the µDMA
controller copies task C configuration to the channel’s
alternate control structure.
Then, using the channel’s alternate control structure, the
µDMA controller copies data from the source buffer C to
the destination buffer.
July 25, 2011
345
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
8.2.6.6
Peripheral Scatter-Gather
Peripheral Scatter-Gather mode is very similar to Memory Scatter-Gather, except that the transfers
are controlled by a peripheral making a μDMA request. Upon detecting a request from the peripheral,
the μDMA controller uses the primary control structure to copy one entry from the list to the alternate
control structure and then performs the transfer. At the end of this transfer, the next transfer is started
only if the peripheral again asserts a μDMA request. The μDMA controller continues to perform
transfers from the list only when the peripheral is making a request, until the last transfer is complete.
A completion interrupt is generated only after the last transfer.
By using this method, the μDMA controller can transfer data to or from a peripheral from a set of
arbitrary locations whenever the peripheral is ready to transfer data.
Refer to Figure 8-5 on page 347 and Figure 8-6 on page 348, which show an example of operation
in Peripheral Scatter-Gather mode. This example shows a gather operation, where data from three
separate buffers in memory is copied to a single peripheral data register. Figure 8-5 on page 347
shows how the application sets up a µDMA task list in memory that is used by the controller to
perform three sets of copy operations from different locations in memory. The primary control
structure for the channel that is used for the operation is configured to copy from the task list to the
alternate control structure.
Figure 8-6 on page 348 shows the sequence as the µDMA controller performs the three sets of copy
operations. First, using the primary control structure, the µDMA controller loads the alternate control
structure with task A. It then performs the copy operation specified by task A, copying the data from
the source buffer A to the peripheral data register. Next, the µDMA controller again uses the primary
control structure to load task B into the alternate control structure, and then performs the B operation
with the alternate control structure. The process is repeated for task C.
346
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 8-5. Peripheral Scatter-Gather, Setup and Configuration
1
2
3
Source Buffer
in Memory
Task List in Memory
Channel Control
Table in Memory
4 WORDS (SRC A)
SRC
A
DST
ITEMS=4
16 WORDS (SRC B)
SRC
DST
SRC
ITEMS=12
DST
B
“TASK” A
Unused
ITEMS=16
Channel Primary
Control Structure
“TASK” B
Unused
SRC
DST
ITEMS=1
“TASK” C
Unused
SRC
DST
Channel Alternate
Control Structure
ITEMS=n
1 WORD (SRC C)
C
Peripheral Data
Register
DEST
NOTES:
1. Application has a need to copy data items from three separate locations in memory into a peripheral data
register.
2. Application sets up µDMA “task list” in memory, which contains the pointers and control configuration for three
µDMA copy “tasks.”
3. Application sets up the channel primary control structure to copy each task configuration, one at a time, to the
alternate control structure, where it is executed by the µDMA controller.
July 25, 2011
347
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Figure 8-6. Peripheral Scatter-Gather, μDMA Copy Sequence
Task List
in Memory
Buffers
in Memory
µDMA Control Table
in Memory
SRC A
SRC
SRC B
PRI
COPIED
DST
TASK A
TASK B
SRC
SRC C
ALT
COPIED
DST
TASK C
Then, using the channel’s alternate control structure, the
µDMA controller copies data from the source buffer A to
the peripheral data register.
Using the channel’s primary control structure, the µDMA
controller copies task A configuration to the channel’s
alternate control structure.
Task List
in Memory
Peripheral
Data
Register
Buffers
in Memory
µDMA Control Table
in Memory
SRC A
SRC
SRC B
PRI
DST
TASK A
SRC
TASK B
TASK C
SRC C
COPIED
ALT
COPIED
DST
Then, using the channel’s alternate control structure, the
µDMA controller copies data from the source buffer B to
the peripheral data register.
Using the channel’s primary control structure, the µDMA
controller copies task B configuration to the channel’s
alternate control structure.
Task List
in Memory
Peripheral
Data
Register
Buffers
in Memory
µDMA Control Table
in Memory
SRC A
SRC
SRC B
PRI
DST
TASK A
SRC
TASK B
TASK C
SRC C
ALT
DST
COPIED
COPIED
Peripheral
Data
Register
Using the channel’s primary control structure, the µDMA
controller copies task C configuration to the channel’s
alternate control structure.
Then, using the channel’s alternate control structure, the
µDMA controller copies data from the source buffer C to
the peripheral data register.
348
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
8.2.7
Transfer Size and Increment
The μDMA controller supports transfer data sizes of 8, 16, or 32 bits. The source and destination
data size must be the same for any given transfer. The source and destination address can be
auto-incremented by bytes, half-words, or words, or can be set to no increment. The source and
destination address increment values can be set independently, and it is not necessary for the
address increment to match the data size as long as the increment is the same or larger than the
data size. For example, it is possible to perform a transfer using 8-bit data size, but using an address
increment of full words (4 bytes). The data to be transferred must be aligned in memory according
to the data size (8, 16, or 32 bits).
Table 8-5 shows the configuration to read from a peripheral that supplies 8-bit data.
Table 8-5. μDMA Read Example: 8-Bit Peripheral
8.2.8
Field
Configuration
Source data size
8 bits
Destination data size
8 bits
Source address increment
No increment
Destination address increment
Byte
Source end pointer
Peripheral read FIFO register
Destination end pointer
End of the data buffer in memory
Peripheral Interface
Each peripheral that supports μDMA has a single request and/or burst request signal that is asserted
when the peripheral is ready to transfer data (see Table 8-2 on page 339). The request signal can
be disabled or enabled using the DMA Channel Request Mask Set (DMAREQMASKSET) and
DMA Channel Request Mask Clear (DMAREQMASKCLR) registers. The μDMA request signal
is disabled, or masked, when the channel request mask bit is set. When the request is not masked,
the μDMA channel is configured correctly and enabled, and the peripheral asserts the request signal,
the μDMA controller begins the transfer.
Note:
When using μDMA to transfer data to and from a peripheral, the peripheral must disable all
interrupts to the NVIC.
When a μDMA transfer is complete, the μDMA controller generates an interrupt, see “Interrupts and
Errors” on page 350 for more information.
For more information on how a specific peripheral interacts with the μDMA controller, refer to the
DMA Operation section in the chapter that discusses that peripheral.
8.2.9
Software Request
One μDMA channel is dedicated to software-initiated transfers. This channel also has a dedicated
interrupt to signal completion of a μDMA transfer. A transfer is initiated by software by first configuring
and enabling the transfer, and then issuing a software request using the DMA Channel Software
Request (DMASWREQ) register. For software-based transfers, the Auto transfer mode should be
used.
It is possible to initiate a transfer on any channel using the DMASWREQ register. If a request is
initiated by software using a peripheral μDMA channel, then the completion interrupt occurs on the
interrupt vector for the peripheral instead of the software interrupt vector. Any channel may be used
for software requests as long as the corresponding peripheral is not using μDMA for data transfer.
July 25, 2011
349
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
8.2.10
Interrupts and Errors
When a μDMA transfer is complete, the μDMA controller generates a completion interrupt on the
interrupt vector of the peripheral. Therefore, if μDMA is used to transfer data for a peripheral and
interrupts are used, then the interrupt handler for that peripheral must be designed to handle the
μDMA transfer completion interrupt. If the transfer uses the software μDMA channel, then the
completion interrupt occurs on the dedicated software μDMA interrupt vector (see Table
8-6 on page 350).
When μDMA is enabled for a peripheral, the μDMA controller stops the normal transfer interrupts
for a peripheral from reaching the interrupt controller (the interrupts are still reported in the peripheral's
interrupt registers). Thus, when a large amount of data is transferred using μDMA, instead of receiving
multiple interrupts from the peripheral as data flows, the interrupt controller receives only one interrupt
when the transfer is complete. Unmasked peripheral error interrupts continue to be sent to the
interrupt controller.
When a μDMA channel generates a completion interrupt, the CHIS bit corresponding to the peripheral
channel is set in the DMA Channel Interrupt Status (DMACHIS) register (see page 385). This
register can be used by the peripheral interrupt handler code to determine if the interrupt was caused
by the μDMA channel or an error event reported by the peripheral's interrupt registers. The completion
interrupt request from the μDMA controller is automatically cleared when the interrupt handler is
activated.
If the μDMA controller encounters a bus or memory protection error as it attempts to perform a data
transfer, it disables the μDMA channel that caused the error and generates an interrupt on the μDMA
error interrupt vector. The processor can read the DMA Bus Error Clear (DMAERRCLR) register
to determine if an error is pending. The ERRCLR bit is set if an error occurred. The error can be
cleared by writing a 1 to the ERRCLR bit.
Table 8-6 shows the dedicated interrupt assignments for the μDMA controller.
Table 8-6. μDMA Interrupt Assignments
Interrupt
Assignment
46
μDMA Software Channel Transfer
47
μDMA Error
8.3
Initialization and Configuration
8.3.1
Module Initialization
Before the μDMA controller can be used, it must be enabled in the System Control block and in the
peripheral. The location of the channel control structure must also be programmed.
The following steps should be performed one time during system initialization:
1. The μDMA peripheral must be enabled in the System Control block. To do this, set the UDMA
bit of the System Control RCGC2 register (see page 251).
2. Enable the μDMA controller by setting the MASTEREN bit of the DMA Configuration (DMACFG)
register.
3. Program the location of the channel control table by writing the base address of the table to the
DMA Channel Control Base Pointer (DMACTLBASE) register. The base address must be
aligned on a 1024-byte boundary.
350
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
8.3.2
Configuring a Memory-to-Memory Transfer
μDMA channel 30 is dedicated for software-initiated transfers. However, any channel can be used
for software-initiated, memory-to-memory transfer if the associated peripheral is not being used.
8.3.2.1
Configure the Channel Attributes
First, configure the channel attributes:
1. Program bit 30 of the DMA Channel Priority Set (DMAPRIOSET) or DMA Channel Priority
Clear (DMAPRIOCLR) registers to set the channel to High priority or Default priority.
2. Set bit 30 of the DMA Channel Primary Alternate Clear (DMAALTCLR) register to select the
primary channel control structure for this transfer.
3. Set bit 30 of the DMA Channel Useburst Clear (DMAUSEBURSTCLR) register to allow the
μDMA controller to respond to single and burst requests.
4. Set bit 30 of the DMA Channel Request Mask Clear (DMAREQMASKCLR) register to allow
the μDMA controller to recognize requests for this channel.
8.3.2.2
Configure the Channel Control Structure
Now the channel control structure must be configured.
This example transfers 256 words from one memory buffer to another. Channel 30 is used for a
software transfer, and the control structure for channel 30 is at offset 0x1E0 of the channel control
table. The channel control structure for channel 30 is located at the offsets shown in Table 8-7.
Table 8-7. Channel Control Structure Offsets for Channel 30
Offset
Description
Control Table Base + 0x1E0
Channel 30 Source End Pointer
Control Table Base + 0x1E4
Channel 30 Destination End Pointer
Control Table Base + 0x1E8
Channel 30 Control Word
Configure the Source and Destination
The source and destination end pointers must be set to the last address for the transfer (inclusive).
1. Program the source end pointer at offset 0x1E0 to the address of the source buffer + 0x3FC.
2. Program the destination end pointer at offset 0x1E4 to the address of the destination buffer +
0x3FC.
The control word at offset 0x1E8 must be programmed according to Table 8-8.
Table 8-8. Channel Control Word Configuration for Memory Transfer Example
Field in DMACHCTL
Bits
Value
DSTINC
31:30
2
32-bit destination address increment
DSTSIZE
29:28
2
32-bit destination data size
SRCINC
27:26
2
32-bit source address increment
SRCSIZE
25:24
2
32-bit source data size
reserved
23:18
0
Reserved
July 25, 2011
Description
351
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Table 8-8. Channel Control Word Configuration for Memory Transfer Example (continued)
Field in DMACHCTL
Bits
Description
ARBSIZE
17:14
3
XFERSIZE
13:4
255
3
0
N/A for this transfer type
2:0
2
Use Auto-request transfer mode
NXTUSEBURST
XFERMODE
8.3.2.3
Value
Arbitrates after 8 transfers
Transfer 256 items
Start the Transfer
Now the channel is configured and is ready to start.
1. Enable the channel by setting bit 30 of the DMA Channel Enable Set (DMAENASET) register.
2. Issue a transfer request by setting bit 30 of the DMA Channel Software Request (DMASWREQ)
register.
The μDMA transfer begins. If the interrupt is enabled, then the processor is notified by interrupt
when the transfer is complete. If needed, the status can be checked by reading bit 30 of the
DMAENASET register. This bit is automatically cleared when the transfer is complete. The status
can also be checked by reading the XFERMODE field of the channel control word at offset 0x1E8.
This field is automatically cleared at the end of the transfer.
8.3.3
Configuring a Peripheral for Simple Transmit
This example configures the μDMA controller to transmit a buffer of data to a peripheral. The
peripheral has a transmit FIFO with a trigger level of 4. The example peripheral uses μDMA channel
7.
8.3.3.1
Configure the Channel Attributes
First, configure the channel attributes:
1. Configure bit 7 of the DMA Channel Priority Set (DMAPRIOSET) or DMA Channel Priority
Clear (DMAPRIOCLR) registers to set the channel to High priority or Default priority.
2. Set bit 7 of the DMA Channel Primary Alternate Clear (DMAALTCLR) register to select the
primary channel control structure for this transfer.
3. Set bit 7 of the DMA Channel Useburst Clear (DMAUSEBURSTCLR) register to allow the
μDMA controller to respond to single and burst requests.
4. Set bit 7 of the DMA Channel Request Mask Clear (DMAREQMASKCLR) register to allow
the μDMA controller to recognize requests for this channel.
8.3.3.2
Configure the Channel Control Structure
This example transfers 64 bytes from a memory buffer to the peripheral's transmit FIFO register
using μDMA channel 7. The control structure for channel 7 is at offset 0x070 of the channel control
table. The channel control structure for channel 7 is located at the offsets shown in Table 8-9.
Table 8-9. Channel Control Structure Offsets for Channel 7
Offset
Description
Control Table Base + 0x070
Channel 7 Source End Pointer
352
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 8-9. Channel Control Structure Offsets for Channel 7 (continued)
Offset
Description
Control Table Base + 0x074
Channel 7 Destination End Pointer
Control Table Base + 0x078
Channel 7 Control Word
Configure the Source and Destination
The source and destination end pointers must be set to the last address for the transfer (inclusive).
Because the peripheral pointer does not change, it simply points to the peripheral's data register.
1. Program the source end pointer at offset 0x070 to the address of the source buffer + 0x3F.
2. Program the destination end pointer at offset 0x074 to the address of the peripheral's transmit
FIFO register.
The control word at offset 0x078 must be programmed according to Table 8-10.
Table 8-10. Channel Control Word Configuration for Peripheral Transmit Example
Field in DMACHCTL
Bits
Value
DSTINC
31:30
3
Destination address does not increment
DSTSIZE
29:28
0
8-bit destination data size
SRCINC
27:26
0
8-bit source address increment
SRCSIZE
25:24
0
8-bit source data size
reserved
23:18
0
Reserved
ARBSIZE
17:14
2
Arbitrates after 4 transfers
XFERSIZE
13:4
63
Transfer 64 items
3
0
N/A for this transfer type
2:0
1
Use Basic transfer mode
NXTUSEBURST
XFERMODE
Note:
8.3.3.3
Description
In this example, it is not important if the peripheral makes a single request or a burst request.
Because the peripheral has a FIFO that triggers at a level of 4, the arbitration size is set to
4. If the peripheral does make a burst request, then 4 bytes are transferred, which is what
the FIFO can accommodate. If the peripheral makes a single request (if there is any space
in the FIFO), then one byte is transferred at a time. If it is important to the application that
transfers only be made in bursts, then the Channel Useburst SET[7] bit should be set in
the DMA Channel Useburst Set (DMAUSEBURSTSET) register.
Start the Transfer
Now the channel is configured and is ready to start.
1. Enable the channel by setting bit 7 of the DMA Channel Enable Set (DMAENASET) register.
The μDMA controller is now configured for transfer on channel 7. The controller makes transfers to
the peripheral whenever the peripheral asserts a μDMA request. The transfers continue until the
entire buffer of 64 bytes has been transferred. When that happens, the μDMA controller disables
the channel and sets the XFERMODE field of the channel control word to 0 (Stopped). The status of
the transfer can be checked by reading bit 7 of the DMA Channel Enable Set (DMAENASET)
register. This bit is automatically cleared when the transfer is complete. The status can also be
checked by reading the XFERMODE field of the channel control word at offset 0x078. This field is
automatically cleared at the end of the transfer.
July 25, 2011
353
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
If peripheral interrupts are enabled, then the peripheral interrupt handler receives an interrupt when
the entire transfer is complete.
8.3.4
Configuring a Peripheral for Ping-Pong Receive
This example configures the μDMA controller to continuously receive 8-bit data from a peripheral
into a pair of 64-byte buffers. The peripheral has a receive FIFO with a trigger level of 8. The example
peripheral uses μDMA channel 8.
8.3.4.1
Configure the Channel Attributes
First, configure the channel attributes:
1. Configure bit 8 of the DMA Channel Priority Set (DMAPRIOSET) or DMA Channel Priority
Clear (DMAPRIOCLR) registers to set the channel to High priority or Default priority.
2. Set bit 8 of the DMA Channel Primary Alternate Clear (DMAALTCLR) register to select the
primary channel control structure for this transfer.
3. Set bit 8 of the DMA Channel Useburst Clear (DMAUSEBURSTCLR) register to allow the
μDMA controller to respond to single and burst requests.
4. Set bit 8 of the DMA Channel Request Mask Clear (DMAREQMASKCLR) register to allow
the μDMA controller to recognize requests for this channel.
8.3.4.2
Configure the Channel Control Structure
This example transfers bytes from the peripheral's receive FIFO register into two memory buffers
of 64 bytes each. As data is received, when one buffer is full, the μDMA controller switches to use
the other.
To use Ping-Pong buffering, both primary and alternate channel control structures must be used.
The primary control structure for channel 8 is at offset 0x080 of the channel control table, and the
alternate channel control structure is at offset 0x280. The channel control structures for channel 8
are located at the offsets shown in Table 8-11.
Table 8-11. Primary and Alternate Channel Control Structure Offsets for Channel 8
Offset
Description
Control Table Base + 0x080
Channel 8 Primary Source End Pointer
Control Table Base + 0x084
Channel 8 Primary Destination End Pointer
Control Table Base + 0x088
Channel 8 Primary Control Word
Control Table Base + 0x280
Channel 8 Alternate Source End Pointer
Control Table Base + 0x284
Channel 8 Alternate Destination End Pointer
Control Table Base + 0x288
Channel 8 Alternate Control Word
Configure the Source and Destination
The source and destination end pointers must be set to the last address for the transfer (inclusive).
Because the peripheral pointer does not change, it simply points to the peripheral's data register.
Both the primary and alternate sets of pointers must be configured.
1. Program the primary source end pointer at offset 0x080 to the address of the peripheral's receive
buffer.
354
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
2. Program the primary destination end pointer at offset 0x084 to the address of ping-pong buffer
A + 0x3F.
3. Program the alternate source end pointer at offset 0x280 to the address of the peripheral's
receive buffer.
4. Program the alternate destination end pointer at offset 0x284 to the address of ping-pong buffer
B + 0x3F.
The primary control word at offset 0x088 and the alternate control word at offset 0x288 are initially
programmed the same way.
1. Program the primary channel control word at offset 0x088 according to Table 8-12.
2. Program the alternate channel control word at offset 0x288 according to Table 8-12.
Table 8-12. Channel Control Word Configuration for Peripheral Ping-Pong Receive Example
Field in DMACHCTL
Bits
Value
DSTINC
31:30
0
8-bit destination address increment
DSTSIZE
29:28
0
8-bit destination data size
SRCINC
27:26
3
Source address does not increment
SRCSIZE
25:24
0
8-bit source data size
reserved
23:18
0
Reserved
ARBSIZE
17:14
3
Arbitrates after 8 transfers
XFERSIZE
13:4
63
Transfer 64 items
3
0
N/A for this transfer type
2:0
3
Use Ping-Pong transfer mode
NXTUSEBURST
XFERMODE
Note:
8.3.4.3
Description
In this example, it is not important if the peripheral makes a single request or a burst request.
Because the peripheral has a FIFO that triggers at a level of 8, the arbitration size is set to
8. If the peripheral does make a burst request, then 8 bytes are transferred, which is what
the FIFO can accommodate. If the peripheral makes a single request (if there is any data
in the FIFO), then one byte is transferred at a time. If it is important to the application that
transfers only be made in bursts, then the Channel Useburst SET[8] bit should be set in
the DMA Channel Useburst Set (DMAUSEBURSTSET) register.
Configure the Peripheral Interrupt
An interrupt handler should be configured when using μDMA Ping-Pong mode, it is best to use an
interrupt handler. However, the Ping-Pong mode can be configured without interrupts by polling.
The interrupt handler is triggered after each buffer is complete.
1. Configure and enable an interrupt handler for the peripheral.
8.3.4.4
Enable the μDMA Channel
Now the channel is configured and is ready to start.
1. Enable the channel by setting bit 8 of the DMA Channel Enable Set (DMAENASET) register.
July 25, 2011
355
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
8.3.4.5
Process Interrupts
The μDMA controller is now configured and enabled for transfer on channel 8. When the peripheral
asserts the μDMA request signal, the μDMA controller makes transfers into buffer A using the primary
channel control structure. When the primary transfer to buffer A is complete, it switches to the
alternate channel control structure and makes transfers into buffer B. At the same time, the primary
channel control word mode field is configured to indicate Stopped, and an interrupt is
When an interrupt is triggered, the interrupt handler must determine which buffer is complete and
process the data or set a flag that the data must be processed by non-interrupt buffer processing
code. Then the next buffer transfer must be set up.
In the interrupt handler:
1. Read the primary channel control word at offset 0x088 and check the XFERMODE field. If the
field is 0, this means buffer A is complete. If buffer A is complete, then:
a. Process the newly received data in buffer A or signal the buffer processing code that buffer
A has data available.
b. Reprogram the primary channel control word at offset 0x88 according to Table
8-12 on page 355.
2. Read the alternate channel control word at offset 0x288 and check the XFERMODE field. If the
field is 0, this means buffer B is complete. If buffer B is complete, then:
a. Process the newly received data in buffer B or signal the buffer processing code that buffer
B has data available.
b. Reprogram the alternate channel control word at offset 0x288 according to Table
8-12 on page 355.
8.3.5
Configuring Channel Assignments
Channel assignments for each μDMA channel can be changed using the DMACHASGN register.
Each bit represents a μDMA channel. If the bit is set, then the secondary function is used for the
channel.
Refer to Table 8-1 on page 337 for channel assignments.
For example, to use SSI1 Receive on channel 8 instead of UART0, set bit 8 of the DMACHASGN
register.
8.4
Register Map
Table 8-13 on page 357 lists the μDMA channel control structures and registers. The channel control
structure shows the layout of one entry in the channel control table. The channel control table is
located in system memory, and the location is determined by the application, that is, the base
address is n/a (not applicable). In the table below, the offset for the channel control structures is the
offset from the entry in the channel control table. See “Channel Configuration” on page 339 and Table
8-3 on page 340 for a description of how the entries in the channel control table are located in memory.
The μDMA register addresses are given as a hexadecimal increment, relative to the μDMA base
address of 0x400F.F000. Note that the μDMA module clock must be enabled before the registers
can be programmed (see page 251). There must be a delay of 3 system clocks after the μDMA
module clock is enabled before any μDMA module registers are accessed.
356
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 8-13. μDMA Register Map
Offset
Name
Type
Reset
Description
See
page
μDMA Channel Control Structure (Offset from Channel Control Table Base)
0x000
DMASRCENDP
R/W
-
DMA Channel Source Address End Pointer
359
0x004
DMADSTENDP
R/W
-
DMA Channel Destination Address End Pointer
360
0x008
DMACHCTL
R/W
-
DMA Channel Control Word
361
DMA Status
366
DMA Configuration
368
μDMA Registers (Offset from μDMA Base Address)
0x000
DMASTAT
RO
0x001F.0000
0x004
DMACFG
WO
-
0x008
DMACTLBASE
R/W
0x0000.0000
DMA Channel Control Base Pointer
369
0x00C
DMAALTBASE
RO
0x0000.0200
DMA Alternate Channel Control Base Pointer
370
0x010
DMAWAITSTAT
RO
0xFFFF.FFC0
DMA Channel Wait-on-Request Status
371
0x014
DMASWREQ
WO
-
DMA Channel Software Request
372
0x018
DMAUSEBURSTSET
R/W
0x0000.0000
DMA Channel Useburst Set
373
0x01C
DMAUSEBURSTCLR
WO
-
DMA Channel Useburst Clear
374
0x020
DMAREQMASKSET
R/W
0x0000.0000
DMA Channel Request Mask Set
375
0x024
DMAREQMASKCLR
WO
-
DMA Channel Request Mask Clear
376
0x028
DMAENASET
R/W
0x0000.0000
DMA Channel Enable Set
377
0x02C
DMAENACLR
WO
-
DMA Channel Enable Clear
378
0x030
DMAALTSET
R/W
0x0000.0000
DMA Channel Primary Alternate Set
379
0x034
DMAALTCLR
WO
-
DMA Channel Primary Alternate Clear
380
0x038
DMAPRIOSET
R/W
0x0000.0000
DMA Channel Priority Set
381
0x03C
DMAPRIOCLR
WO
-
DMA Channel Priority Clear
382
0x04C
DMAERRCLR
R/W
0x0000.0000
DMA Bus Error Clear
383
0x500
DMACHASGN
R/W
0x0000.0000
DMA Channel Assignment
384
0x504
DMACHIS
R/W1C
0x0000.0000
DMA Channel Interrupt Status
385
0xFD0
DMAPeriphID4
RO
0x0000.0004
DMA Peripheral Identification 4
390
0xFE0
DMAPeriphID0
RO
0x0000.0030
DMA Peripheral Identification 0
386
0xFE4
DMAPeriphID1
RO
0x0000.00B2
DMA Peripheral Identification 1
387
0xFE8
DMAPeriphID2
RO
0x0000.000B
DMA Peripheral Identification 2
388
0xFEC
DMAPeriphID3
RO
0x0000.0000
DMA Peripheral Identification 3
389
0xFF0
DMAPCellID0
RO
0x0000.000D
DMA PrimeCell Identification 0
391
0xFF4
DMAPCellID1
RO
0x0000.00F0
DMA PrimeCell Identification 1
392
0xFF8
DMAPCellID2
RO
0x0000.0005
DMA PrimeCell Identification 2
393
July 25, 2011
357
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Table 8-13. μDMA Register Map (continued)
Offset
Name
0xFFC
DMAPCellID3
8.5
Type
Reset
RO
0x0000.00B1
Description
DMA PrimeCell Identification 3
See
page
394
μDMA Channel Control Structure
The μDMA Channel Control Structure holds the transfer settings for a μDMA channel. Each channel
has two control structures, which are located in a table in system memory. Refer to “Channel
Configuration” on page 339 for an explanation of the Channel Control Table and the Channel Control
Structure.
The channel control structure is one entry in the channel control table. Each channel has a primary
and alternate structure. The primary control structures are located at offsets 0x0, 0x10, 0x20 and
so on. The alternate control structures are located at offsets 0x200, 0x210, 0x220, and so on.
358
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 1: DMA Channel Source Address End Pointer (DMASRCENDP), offset
0x000
DMA Channel Source Address End Pointer (DMASRCENDP) is part of the Channel Control
Structure and is used to specify the source address for a μDMA transfer.
The μDMA controller can transfer data to and from the on-chip SRAM. However, because the Flash
memory and ROM are located on a separate internal bus, it is not possible to transfer data from the
Flash memory or ROM with the μDMA controller.
Note:
The offset specified is from the base address of the control structure in system memory,
not the μDMA module base address.
DMA Channel Source Address End Pointer (DMASRCENDP)
Base n/a
Offset 0x000
Type R/W, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
7
6
5
4
3
2
1
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
ADDR
Type
Reset
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
15
14
13
12
11
10
9
8
ADDR
Type
Reset
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
Bit/Field
Name
Type
Reset
31:0
ADDR
R/W
-
R/W
-
Description
Source Address End Pointer
This field points to the last address of the μDMA transfer source
(inclusive). If the source address is not incrementing (the SRCINC field
in the DMACHCTL register is 0x3), then this field points at the source
location itself (such as a peripheral data register).
July 25, 2011
359
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 2: DMA Channel Destination Address End Pointer (DMADSTENDP),
offset 0x004
DMA Channel Destination Address End Pointer (DMADSTENDP) is part of the Channel Control
Structure and is used to specify the destination address for a μDMA transfer.
Note:
The offset specified is from the base address of the control structure in system memory,
not the μDMA module base address.
DMA Channel Destination Address End Pointer (DMADSTENDP)
Base n/a
Offset 0x004
Type R/W, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
ADDR
Type
Reset
ADDR
Type
Reset
Bit/Field
Name
Type
Reset
31:0
ADDR
R/W
-
Description
Destination Address End Pointer
This field points to the last address of the μDMA transfer destination
(inclusive). If the destination address is not incrementing (the DSTINC
field in the DMACHCTL register is 0x3), then this field points at the
destination location itself (such as a peripheral data register).
360
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 3: DMA Channel Control Word (DMACHCTL), offset 0x008
DMA Channel Control Word (DMACHCTL) is part of the Channel Control Structure and is used
to specify parameters of a μDMA transfer.
Note:
The offset specified is from the base address of the control structure in system memory,
not the μDMA module base address.
DMA Channel Control Word (DMACHCTL)
Base n/a
Offset 0x008
Type R/W, reset 31
30
DSTINC
Type
Reset
29
28
27
DSTSIZE
26
24
23
22
21
SRCSIZE
20
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
15
14
13
12
11
10
9
8
7
6
5
4
R/W
-
XFERSIZE
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
Bit/Field
Name
Type
Reset
31:30
DSTINC
R/W
-
18
17
R/W
-
R/W
-
3
2
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
1
0
XFERMODE
NXTUSEBURST
R/W
-
16
ARBSIZE
R/W
-
R/W
-
19
reserved
R/W
-
ARBSIZE
Type
Reset
25
SRCINC
R/W
-
R/W
-
R/W
-
Description
Destination Address Increment
This field configures the destination address increment.
The address increment value must be equal or greater than the value
of the destination size (DSTSIZE).
Value Description
0x0
Byte
Increment by 8-bit locations
0x1
Half-word
Increment by 16-bit locations
0x2
Word
Increment by 32-bit locations
0x3
No increment
Address remains set to the value of the Destination Address
End Pointer (DMADSTENDP) for the channel
29:28
DSTSIZE
R/W
-
Destination Data Size
This field configures the destination item data size.
Note:
DSTSIZE must be the same as SRCSIZE.
Value Description
0x0
Byte
8-bit data size
0x1
Half-word
16-bit data size
0x2
Word
32-bit data size
0x3
Reserved
July 25, 2011
361
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Bit/Field
Name
Type
Reset
27:26
SRCINC
R/W
-
Description
Source Address Increment
This field configures the source address increment.
The address increment value must be equal or greater than the value
of the source size (SRCSIZE).
Value Description
0x0
Byte
Increment by 8-bit locations
0x1
Half-word
Increment by 16-bit locations
0x2
Word
Increment by 32-bit locations
0x3
No increment
Address remains set to the value of the Source Address End
Pointer (DMASRCENDP) for the channel
25:24
SRCSIZE
R/W
-
Source Data Size
This field configures the source item data size.
Note:
DSTSIZE must be the same as SRCSIZE.
Value Description
0x0
Byte
8-bit data size.
0x1
Half-word
16-bit data size.
0x2
Word
32-bit data size.
0x3
23:18
reserved
R/W
-
Reserved
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
362
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
17:14
ARBSIZE
R/W
-
Description
Arbitration Size
This field configures the number of transfers that can occur before the
μDMA controller re-arbitrates. The possible arbitration rate configurations
represent powers of 2 and are shown below.
Value
Description
0x0
1 Transfer
Arbitrates after each μDMA transfer
0x1
2 Transfers
0x2
4 Transfers
0x3
8 Transfers
0x4
16 Transfers
0x5
32 Transfers
0x6
64 Transfers
0x7
128 Transfers
0x8
256 Transfers
0x9
512 Transfers
0xA-0xF 1024 Transfers
In this configuration, no arbitration occurs during the μDMA
transfer because the maximum transfer size is 1024.
13:4
XFERSIZE
R/W
-
Transfer Size (minus 1)
This field configures the total number of items to transfer. The value of
this field is 1 less than the number to transfer (value 0 means transfer
1 item). The maximum value for this 10-bit field is 1023 which represents
a transfer size of 1024 items.
The transfer size is the number of items, not the number of bytes. If the
data size is 32 bits, then this value is the number of 32-bit words to
transfer.
The μDMA controller updates this field immediately prior to entering the
arbitration process, so it contains the number of outstanding items that
is necessary to complete the μDMA cycle.
3
NXTUSEBURST
R/W
-
Next Useburst
This field controls whether the Useburst SET[n] bit is automatically set
for the last transfer of a peripheral scatter-gather operation. Normally,
for the last transfer, if the number of remaining items to transfer is less
than the arbitration size, the μDMA controller uses single transfers to
complete the transaction. If this bit is set, then the controller uses a burst
transfer to complete the last transfer.
July 25, 2011
363
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Bit/Field
Name
Type
Reset
2:0
XFERMODE
R/W
-
Description
μDMA Transfer Mode
This field configures the operating mode of the μDMA cycle. Refer to
“Transfer Modes” on page 341 for a detailed explanation of transfer
modes.
Because this register is in system RAM, it has no reset value. Therefore,
this field should be initialized to 0 before the channel is enabled.
Value Description
0x0
Stop
0x1
Basic
0x2
Auto-Request
0x3
Ping-Pong
0x4
Memory Scatter-Gather
0x5
Alternate Memory Scatter-Gather
0x6
Peripheral Scatter-Gather
0x7
Alternate Peripheral Scatter-Gather
XFERMODE Bit Field Values.
Stop
Channel is stopped or configuration data is invalid. No more transfers can occur.
Basic
For each trigger (whether from a peripheral or a software request), the μDMA controller performs
the number of transfers specified by the ARBSIZE field.
Auto-Request
The initial request (software- or peripheral-initiated) is sufficient to complete the entire transfer
of XFERSIZE items without any further requests.
Ping-Pong
This mode uses both the primary and alternate control structures for this channel. When the
number of transfers specified by the XFERSIZE field have completed for the current control
structure (primary or alternate), the µDMA controller switches to the other one. These switches
continue until one of the control structures is not set to ping-pong mode. At that point, the µDMA
controller stops. An interrupt is generated on completion of the transfers configured by each
control structure. See “Ping-Pong” on page 341.
Memory Scatter-Gather
When using this mode, the primary control structure for the channel is configured to allow a list
of operations (tasks) to be performed. The source address pointer specifies the start of a table
of tasks to be copied to the alternate control structure for this channel. The XFERMODE field for
the alternate control structure should be configured to 0x5 (Alternate memory scatter-gather)
to perform the task. When the task completes, the µDMA switches back to the primary channel
control structure, which then copies the next task to the alternate control structure. This process
continues until the table of tasks is empty. The last task must have an XFERMODE value other
than 0x5. Note that for continuous operation, the last task can update the primary channel control
structure back to the start of the list or to another list. See “Memory Scatter-Gather” on page 342.
364
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Alternate Memory Scatter-Gather
This value must be used in the alternate channel control data structure when the μDMA controller
operates in Memory Scatter-Gather mode.
Peripheral Scatter-Gather
This value must be used in the primary channel control data structure when the μDMA controller
operates in Peripheral Scatter-Gather mode. In this mode, the μDMA controller operates exactly
the same as in Memory Scatter-Gather mode, except that instead of performing the number of
transfers specified by the XFERSIZE field in the alternate control structure at one time, the
μDMA controller only performs the number of transfers specified by the ARBSIZE field per
trigger; see Basic mode for details. See “Peripheral Scatter-Gather” on page 346.
Alternate Peripheral Scatter-Gather
This value must be used in the alternate channel control data structure when the μDMA controller
operates in Peripheral Scatter-Gather mode.
8.6
μDMA Register Descriptions
The register addresses given are relative to the μDMA base address of 0x400F.F000.
July 25, 2011
365
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 4: DMA Status (DMASTAT), offset 0x000
The DMA Status (DMASTAT) register returns the status of the μDMA controller. You cannot read
this register when the μDMA controller is in the reset state.
DMA Status (DMASTAT)
Base 0x400F.F000
Offset 0x000
Type RO, reset 0x001F.0000
31
30
29
28
27
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
RO
0
RO
0
RO
0
RO
0
26
25
24
23
22
21
20
19
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
10
9
8
7
6
5
4
3
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
STATE
RO
0
17
16
RO
1
RO
1
RO
1
2
1
0
DMACHANS
reserved
Type
Reset
18
reserved
RO
0
MASTEN
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:21
reserved
RO
0x000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
20:16
DMACHANS
RO
0x1F
Available μDMA Channels Minus 1
This field contains a value equal to the number of μDMA channels the
μDMA controller is configured to use, minus one. The value of 0x1F
corresponds to 32 μDMA channels.
15:8
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7:4
STATE
RO
0x0
Control State Machine Status
This field shows the current status of the control state machine. Status
can be one of the following.
Value
Description
0x0
Idle
0x1
Reading channel controller data.
0x2
Reading source end pointer.
0x3
Reading destination end pointer.
0x4
Reading source data.
0x5
Writing destination data.
0x6
Waiting for µDMA request to clear.
0x7
Writing channel controller data.
0x8
Stalled
0x9
Done
0xA-0xF Undefined
3:1
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
366
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
0
MASTEN
RO
0
Description
Master Enable Status
Value Description
0
The μDMA controller is disabled.
1
The μDMA controller is enabled.
July 25, 2011
367
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 5: DMA Configuration (DMACFG), offset 0x004
The DMACFG register controls the configuration of the μDMA controller.
DMA Configuration (DMACFG)
Base 0x400F.F000
Offset 0x004
Type WO, reset 31
30
29
28
27
26
25
24
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
15
14
13
12
11
10
9
8
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
23
22
21
20
19
18
17
16
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
7
6
5
4
3
2
1
0
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
reserved
Type
Reset
reserved
Type
Reset
WO
-
MASTEN
WO
-
Bit/Field
Name
Type
Reset
Description
31:1
reserved
WO
-
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
MASTEN
WO
-
Controller Master Enable
Value Description
0
Disables the μDMA controller.
1
Enables μDMA controller.
368
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 6: DMA Channel Control Base Pointer (DMACTLBASE), offset 0x008
The DMACTLBASE register must be configured so that the base pointer points to a location in
system memory.
The amount of system memory that must be assigned to the μDMA controller depends on the
number of μDMA channels used and whether the alternate channel control data structure is used.
See “Channel Configuration” on page 339 for details about the Channel Control Table. The base
address must be aligned on a 1024-byte boundary. This register cannot be read when the μDMA
controller is in the reset state.
DMA Channel Control Base Pointer (DMACTLBASE)
Base 0x400F.F000
Offset 0x008
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
ADDR
Type
Reset
R/W
0
R/W
0
R/W
0
15
14
13
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
ADDR
Type
Reset
R/W
0
R/W
0
R/W
0
reserved
R/W
0
R/W
0
R/W
0
RO
0
Bit/Field
Name
Type
Reset
31:10
ADDR
R/W
0x0000.00
RO
0
RO
0
RO
0
RO
0
Description
Channel Control Base Address
This field contains the pointer to the base address of the channel control
table. The base address must be 1024-byte aligned.
9:0
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
369
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 7: DMA Alternate Channel Control Base Pointer (DMAALTBASE),
offset 0x00C
The DMAALTBASE register returns the base address of the alternate channel control data. This
register removes the necessity for application software to calculate the base address of the alternate
channel control structures. This register cannot be read when the μDMA controller is in the reset
state.
DMA Alternate Channel Control Base Pointer (DMAALTBASE)
Base 0x400F.F000
Offset 0x00C
Type RO, reset 0x0000.0200
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
ADDR
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
ADDR
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
31:0
ADDR
RO
RO
1
Reset
RO
0
Description
0x0000.0200 Alternate Channel Address Pointer
This field provides the base address of the alternate channel control
structures.
370
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 8: DMA Channel Wait-on-Request Status (DMAWAITSTAT), offset
0x010
This read-only register indicates that the μDMA channel is waiting on a request. A peripheral can
hold off the μDMA from performing a single request until the peripheral is ready for a burst request
to enhance the μDMA performance. The use of this feature is dependent on the design of the
peripheral and is not controllable by software in any way. This register cannot be read when the
μDMA controller is in the reset state.
DMA Channel Wait-on-Request Status (DMAWAITSTAT)
Base 0x400F.F000
Offset 0x010
Type RO, reset 0xFFFF.FFC0
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
WAITREQ[n]
Type
Reset
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
15
14
13
12
11
10
9
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
8
7
6
5
4
3
2
1
0
RO
1
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
WAITREQ[n]
Type
Reset
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
Bit/Field
Name
Type
31:0
WAITREQ[n]
RO
RO
1
Reset
RO
1
RO
1
Description
0xFFFF.FFC0 Channel [n] Wait Status
These bits provide the channel wait-on-request status. Bit 0 corresponds
to channel 0.
Value Description
1
The corresponding channel is waiting on a request.
0
The corresponding channel is not waiting on a request.
July 25, 2011
371
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 9: DMA Channel Software Request (DMASWREQ), offset 0x014
Each bit of the DMASWREQ register represents the corresponding μDMA channel. Setting a bit
generates a request for the specified μDMA channel.
DMA Channel Software Request (DMASWREQ)
Base 0x400F.F000
Offset 0x014
Type WO, reset 31
30
29
28
27
26
25
24
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
15
14
13
12
11
10
9
8
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
23
22
21
20
19
18
17
16
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
7
6
5
4
3
2
1
0
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
SWREQ[n]
Type
Reset
SWREQ[n]
Type
Reset
Bit/Field
Name
Type
Reset
31:0
SWREQ[n]
WO
-
WO
-
Description
Channel [n] Software Request
These bits generate software requests. Bit 0 corresponds to channel 0.
Value Description
1
Generate a software request for the corresponding channel.
0
No request generated.
These bits are automatically cleared when the software request has
been completed.
372
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 10: DMA Channel Useburst Set (DMAUSEBURSTSET), offset 0x018
Each bit of the DMAUSEBURSTSET register represents the corresponding μDMA channel. Setting
a bit disables the channel's single request input from generating requests, configuring the channel
to only accept burst requests. Reading the register returns the status of USEBURST.
If the amount of data to transfer is a multiple of the arbitration (burst) size, the corresponding SET[n]
bit is cleared after completing the final transfer. If there are fewer items remaining to transfer than
the arbitration (burst) size, the μDMA controller automatically clears the corresponding SET[n] bit,
allowing the remaining items to transfer using single requests. In order to resume transfers using
burst requests, the corresponding bit must be set again. A bit should not be set if the corresponding
peripheral does not support the burst request model.
Refer to “Request Types” on page 338 for more details about request types.
DMA Channel Useburst Set (DMAUSEBURSTSET)
Base 0x400F.F000
Offset 0x018
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
SET[n]
Type
Reset
SET[n]
Type
Reset
Bit/Field
Name
Type
31:0
SET[n]
R/W
Reset
Description
0x0000.0000 Channel [n] Useburst Set
Value Description
0
μDMA channel [n] responds to single or burst requests.
1
μDMA channel [n] responds only to burst requests.
Bit 0 corresponds to channel 0. This bit is automatically cleared as
described above. A bit can also be manually cleared by setting the
corresponding CLR[n] bit in the DMAUSEBURSTCLR register.
July 25, 2011
373
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 11: DMA Channel Useburst Clear (DMAUSEBURSTCLR), offset 0x01C
Each bit of the DMAUSEBURSTCLR register represents the corresponding μDMA channel. Setting
a bit clears the corresponding SET[n] bit in the DMAUSEBURSTSET register.
DMA Channel Useburst Clear (DMAUSEBURSTCLR)
Base 0x400F.F000
Offset 0x01C
Type WO, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
CLR[n]
Type
Reset
CLR[n]
Type
Reset
Bit/Field
Name
Type
Reset
31:0
CLR[n]
WO
-
Description
Channel [n] Useburst Clear
Value Description
0
No effect.
1
Setting a bit clears the corresponding SET[n] bit in the
DMAUSEBURSTSET register meaning that µDMA channel [n]
responds to single and burst requests.
374
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 12: DMA Channel Request Mask Set (DMAREQMASKSET), offset
0x020
Each bit of the DMAREQMASKSET register represents the corresponding μDMA channel. Setting
a bit disables μDMA requests for the channel. Reading the register returns the request mask status.
When a μDMA channel's request is masked, that means the peripheral can no longer request μDMA
transfers. The channel can then be used for software-initiated transfers.
DMA Channel Request Mask Set (DMAREQMASKSET)
Base 0x400F.F000
Offset 0x020
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
SET[n]
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
SET[n]
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
31:0
SET[n]
R/W
R/W
0
Reset
R/W
0
Description
0x0000.0000 Channel [n] Request Mask Set
Value Description
0
The peripheral associated with channel [n] is enabled to request
μDMA transfers.
1
The peripheral associated with channel [n] is not able to request
μDMA transfers. Channel [n] may be used for software-initiated
transfers.
Bit 0 corresponds to channel 0. A bit can only be cleared by setting the
corresponding CLR[n] bit in the DMAREQMASKCLR register.
July 25, 2011
375
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 13: DMA Channel Request Mask Clear (DMAREQMASKCLR), offset
0x024
Each bit of the DMAREQMASKCLR register represents the corresponding μDMA channel. Setting
a bit clears the corresponding SET[n] bit in the DMAREQMASKSET register.
DMA Channel Request Mask Clear (DMAREQMASKCLR)
Base 0x400F.F000
Offset 0x024
Type WO, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
7
6
5
4
3
2
1
0
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
CLR[n]
Type
Reset
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
15
14
13
12
11
10
9
8
CLR[n]
Type
Reset
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
Bit/Field
Name
Type
Reset
31:0
CLR[n]
WO
-
WO
-
Description
Channel [n] Request Mask Clear
Value Description
0
No effect.
1
Setting a bit clears the corresponding SET[n] bit in the
DMAREQMASKSET register meaning that the peripheral
associated with channel [n] is enabled to request μDMA
transfers.
376
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 14: DMA Channel Enable Set (DMAENASET), offset 0x028
Each bit of the DMAENASET register represents the corresponding µDMA channel. Setting a bit
enables the corresponding µDMA channel. Reading the register returns the enable status of the
channels. If a channel is enabled but the request mask is set (DMAREQMASKSET), then the
channel can be used for software-initiated transfers.
DMA Channel Enable Set (DMAENASET)
Base 0x400F.F000
Offset 0x028
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
SET[n]
Type
Reset
SET[n]
Type
Reset
Bit/Field
Name
Type
31:0
SET[n]
R/W
Reset
Description
0x0000.0000 Channel [n] Enable Set
Value Description
0
µDMA Channel [n] is disabled.
1
µDMA Channel [n] is enabled.
Bit 0 corresponds to channel 0. A bit can only be cleared by setting the
corresponding CLR[n] bit in the DMAENACLR register.
July 25, 2011
377
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 15: DMA Channel Enable Clear (DMAENACLR), offset 0x02C
Each bit of the DMAENACLR register represents the corresponding µDMA channel. Setting a bit
clears the corresponding SET[n] bit in the DMAENASET register.
DMA Channel Enable Clear (DMAENACLR)
Base 0x400F.F000
Offset 0x02C
Type WO, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
CLR[n]
Type
Reset
CLR[n]
Type
Reset
Bit/Field
Name
Type
Reset
31:0
CLR[n]
WO
-
Description
Clear Channel [n] Enable Clear
Value Description
0
No effect.
1
Setting a bit clears the corresponding SET[n] bit in the
DMAENASET register meaning that channel [n] is disabled for
μDMA transfers.
Note:
The controller disables a channel when it completes the μDMA
cycle.
378
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 16: DMA Channel Primary Alternate Set (DMAALTSET), offset 0x030
Each bit of the DMAALTSET register represents the corresponding µDMA channel. Setting a bit
configures the µDMA channel to use the alternate control data structure. Reading the register returns
the status of which control data structure is in use for the corresponding µDMA channel.
DMA Channel Primary Alternate Set (DMAALTSET)
Base 0x400F.F000
Offset 0x030
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
SET[n]
Type
Reset
SET[n]
Type
Reset
Bit/Field
Name
Type
31:0
SET[n]
R/W
Reset
Description
0x0000.0000 Channel [n] Alternate Set
Value Description
0
µDMA channel [n] is using the primary control structure.
1
µDMA channel [n] is using the alternate control structure.
Bit 0 corresponds to channel 0. A bit can only be cleared by setting the
corresponding CLR[n] bit in the DMAALTCLR register.
Note:
For Ping-Pong and Scatter-Gather cycle types, the µDMA
controller automatically sets these bits to select the alternate
channel control data structure.
July 25, 2011
379
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 17: DMA Channel Primary Alternate Clear (DMAALTCLR), offset
0x034
Each bit of the DMAALTCLR register represents the corresponding μDMA channel. Setting a bit
clears the corresponding SET[n] bit in the DMAALTSET register.
DMA Channel Primary Alternate Clear (DMAALTCLR)
Base 0x400F.F000
Offset 0x034
Type WO, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
7
6
5
4
3
2
1
0
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
CLR[n]
Type
Reset
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
15
14
13
12
11
10
9
8
CLR[n]
Type
Reset
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
Bit/Field
Name
Type
Reset
31:0
CLR[n]
WO
-
WO
-
Description
Channel [n] Alternate Clear
Value Description
0
No effect.
1
Setting a bit clears the corresponding SET[n] bit in the
DMAALTSET register meaning that channel [n] is using the
primary control structure.
Note:
For Ping-Pong and Scatter-Gather cycle types, the µDMA
controller automatically sets these bits to select the alternate
channel control data structure.
380
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 18: DMA Channel Priority Set (DMAPRIOSET), offset 0x038
Each bit of the DMAPRIOSET register represents the corresponding µDMA channel. Setting a bit
configures the µDMA channel to have a high priority level. Reading the register returns the status
of the channel priority mask.
DMA Channel Priority Set (DMAPRIOSET)
Base 0x400F.F000
Offset 0x038
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
SET[n]
Type
Reset
SET[n]
Type
Reset
Bit/Field
Name
Type
31:0
SET[n]
R/W
Reset
Description
0x0000.0000 Channel [n] Priority Set
Value Description
0
µDMA channel [n] is using the default priority level.
1
µDMA channel [n] is using a high priority level.
Bit 0 corresponds to channel 0. A bit can only be cleared by setting the
corresponding CLR[n] bit in the DMAPRIOCLR register.
July 25, 2011
381
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 19: DMA Channel Priority Clear (DMAPRIOCLR), offset 0x03C
Each bit of the DMAPRIOCLR register represents the corresponding µDMA channel. Setting a bit
clears the corresponding SET[n] bit in the DMAPRIOSET register.
DMA Channel Priority Clear (DMAPRIOCLR)
Base 0x400F.F000
Offset 0x03C
Type WO, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
CLR[n]
Type
Reset
CLR[n]
Type
Reset
Bit/Field
Name
Type
Reset
31:0
CLR[n]
WO
-
Description
Channel [n] Priority Clear
Value Description
0
No effect.
1
Setting a bit clears the corresponding SET[n] bit in the
DMAPRIOSET register meaning that channel [n] is using the
default priority level.
382
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 20: DMA Bus Error Clear (DMAERRCLR), offset 0x04C
The DMAERRCLR register is used to read and clear the µDMA bus error status. The error status
is set if the μDMA controller encountered a bus error while performing a transfer. If a bus error
occurs on a channel, that channel is automatically disabled by the μDMA controller. The other
channels are unaffected.
DMA Bus Error Clear (DMAERRCLR)
Base 0x400F.F000
Offset 0x04C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:1
reserved
RO
0x0000.000
0
ERRCLR
R/W1C
0
RO
0
ERRCLR
R/W1C
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
μDMA Bus Error Status
Value Description
0
No bus error is pending.
1
A bus error is pending.
This bit is cleared by writing a 1 to it.
July 25, 2011
383
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 21: DMA Channel Assignment (DMACHASGN), offset 0x500
Each bit of the DMACHASGN register represents the corresponding µDMA channel. Setting a bit
selects the secondary channel assignment as specified in Table 8-1 on page 337.
DMA Channel Assignment (DMACHASGN)
Base 0x400F.F000
Offset 0x500
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
15
14
13
12
11
10
9
8
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
23
22
21
20
19
18
17
16
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
7
6
5
4
3
2
1
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
CHASGN[n]
Type
Reset
CHASGN[n]
Type
Reset
Bit/Field
Name
Type
Reset
31:0
CHASGN[n]
R/W
-
R/W
-
Description
Channel [n] Assignment Select
Value Description
0
Use the primary channel assignment.
1
Use the secondary channel assignment.
384
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 22: DMA Channel Interrupt Status (DMACHIS), offset 0x504
Each bit of the DMACHIS register represents the corresponding µDMA channel. A bit is set when
that μDMA channel causes a completion interrupt. The bits are cleared by a writing a 1.
DMA Channel Interrupt Status (DMACHIS)
Base 0x400F.F000
Offset 0x504
Type R/W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
CHIS[n]
Type
Reset
CHIS[n]
Type
Reset
Bit/Field
Name
Type
31:0
CHIS[n]
R/W1C
Reset
Description
0x0000.0000 Channel [n] Interrupt Status
Value Description
1
The corresponding μDMA channel caused an interrupt.
0
The corresponding μDMA channel has not caused an interrupt.
This bit is cleared by writing a 1 to it.
July 25, 2011
385
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 23: DMA Peripheral Identification 0 (DMAPeriphID0), offset 0xFE0
The DMAPeriphIDn registers are hard-coded, and the fields within the registers determine the reset
values.
DMA Peripheral Identification 0 (DMAPeriphID0)
Base 0x400F.F000
Offset 0xFE0
Type RO, reset 0x0000.0030
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID0
RO
0x30
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
μDMA Peripheral ID Register [7:0]
Can be used by software to identify the presence of this peripheral.
386
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 24: DMA Peripheral Identification 1 (DMAPeriphID1), offset 0xFE4
The DMAPeriphIDn registers are hard-coded, and the fields within the registers determine the reset
values.
DMA Peripheral Identification 1 (DMAPeriphID1)
Base 0x400F.F000
Offset 0xFE4
Type RO, reset 0x0000.00B2
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
0
RO
1
RO
1
RO
0
RO
0
RO
1
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID1
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID1
RO
0xB2
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
μDMA Peripheral ID Register [15:8]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
387
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 25: DMA Peripheral Identification 2 (DMAPeriphID2), offset 0xFE8
The DMAPeriphIDn registers are hard-coded, and the fields within the registers determine the reset
values.
DMA Peripheral Identification 2 (DMAPeriphID2)
Base 0x400F.F000
Offset 0xFE8
Type RO, reset 0x0000.000B
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
0
RO
1
RO
1
reserved
Type
Reset
reserved
Type
Reset
PID2
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID2
RO
0x0B
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
μDMA Peripheral ID Register [23:16]
Can be used by software to identify the presence of this peripheral.
388
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 26: DMA Peripheral Identification 3 (DMAPeriphID3), offset 0xFEC
The DMAPeriphIDn registers are hard-coded and the fields within the registers determine the reset
values.
DMA Peripheral Identification 3 (DMAPeriphID3)
Base 0x400F.F000
Offset 0xFEC
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID3
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID3
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
μDMA Peripheral ID Register [31:24]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
389
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 27: DMA Peripheral Identification 4 (DMAPeriphID4), offset 0xFD0
The DMAPeriphIDn registers are hard-coded, and the fields within the registers determine the reset
values.
DMA Peripheral Identification 4 (DMAPeriphID4)
Base 0x400F.F000
Offset 0xFD0
Type RO, reset 0x0000.0004
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID4
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID4
RO
0x04
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
μDMA Peripheral ID Register
Can be used by software to identify the presence of this peripheral.
390
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 28: DMA PrimeCell Identification 0 (DMAPCellID0), offset 0xFF0
The DMAPCellIDn registers are hard-coded, and the fields within the registers determine the reset
values.
DMA PrimeCell Identification 0 (DMAPCellID0)
Base 0x400F.F000
Offset 0xFF0
Type RO, reset 0x0000.000D
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID0
RO
0x0D
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
μDMA PrimeCell ID Register [7:0]
Provides software a standard cross-peripheral identification system.
July 25, 2011
391
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 29: DMA PrimeCell Identification 1 (DMAPCellID1), offset 0xFF4
The DMAPCellIDn registers are hard-coded, and the fields within the registers determine the reset
values.
DMA PrimeCell Identification 1 (DMAPCellID1)
Base 0x400F.F000
Offset 0xFF4
Type RO, reset 0x0000.00F0
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
1
RO
1
RO
1
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
CID1
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID1
RO
0xF0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
μDMA PrimeCell ID Register [15:8]
Provides software a standard cross-peripheral identification system.
392
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 30: DMA PrimeCell Identification 2 (DMAPCellID2), offset 0xFF8
The DMAPCellIDn registers are hard-coded, and the fields within the registers determine the reset
values.
DMA PrimeCell Identification 2 (DMAPCellID2)
Base 0x400F.F000
Offset 0xFF8
Type RO, reset 0x0000.0005
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID2
RO
0
Bit/Field
Name
Type
Reset
Description
31:8
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7:0
CID2
RO
0x05
μDMA PrimeCell ID Register [23:16]
Provides software a standard cross-peripheral identification system.
July 25, 2011
393
Texas Instruments-Production Data
Micro Direct Memory Access (μDMA)
Register 31: DMA PrimeCell Identification 3 (DMAPCellID3), offset 0xFFC
The DMAPCellIDn registers are hard-coded, and the fields within the registers determine the reset
values.
DMA PrimeCell Identification 3 (DMAPCellID3)
Base 0x400F.F000
Offset 0xFFC
Type RO, reset 0x0000.00B1
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
0
RO
1
RO
1
RO
0
RO
0
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID3
RO
0
Bit/Field
Name
Type
Reset
Description
31:8
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7:0
CID3
RO
0xB1
μDMA PrimeCell ID Register [31:24]
Provides software a standard cross-peripheral identification system.
394
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
9
General-Purpose Input/Outputs (GPIOs)
The GPIO module is composed of eight physical GPIO blocks, each corresponding to an individual
GPIO port (Port A, Port B, Port C, Port D, Port E, Port F, Port G, Port H). The GPIO module supports
up to 60 programmable input/output pins, depending on the peripherals being used.
The GPIO module has the following features:
■ Up to 60 GPIOs, depending on configuration
■ Highly flexible pin muxing allows use as GPIO or one of several peripheral functions
■ 5-V-tolerant in input configuration
■ Fast toggle capable of a change every two clock cycles
■ Two means of port access: either Advanced High-Performance Bus (AHB) with better back-to-back
access performance, or the legacy Advanced Peripheral Bus (APB) for backwards-compatibility
with existing code
■ Programmable control for GPIO interrupts
– Interrupt generation masking
– Edge-triggered on rising, falling, or both
– Level-sensitive on High or Low values
■ Bit masking in both read and write operations through address lines
■ Can be used to initiate an ADC sample sequence
■ Pins configured as digital inputs are Schmitt-triggered
■ Programmable control for GPIO pad configuration
– Weak pull-up or pull-down resistors
– 2-mA, 4-mA, and 8-mA pad drive for digital communication; up to four pads can sink 18-mA
for high-current applications
– Slew rate control for the 8-mA drive
– Open drain enables
– Digital input enables
9.1
Signal Description
GPIO signals have alternate hardware functions. The following table lists the GPIO pins and their
analog and digital alternate functions. The AINx and VREFA analog signals are not 5-V tolerant and
go through an isolation circuit before reaching their circuitry. These signals are configured by clearing
the corresponding DEN bit in the GPIO Digital Enable (GPIODEN) register and setting the
corresponding AMSEL bit in the GPIO Analog Mode Select (GPIOAMSEL) register. All GPIO signals
are 5-V tolerant when configured as inputs except for PB0 and PB1, which are limited to 3.6 V. The
July 25, 2011
395
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
digital alternate hardware functions are enabled by setting the appropriate bit in the GPIO Alternate
Function Select (GPIOAFSEL) and GPIODEN registers and configuring the PMCx bit field in the
GPIO Port Control (GPIOPCTL) register to the numeric encoding shown in the table below. Note
that each pin must be programmed individually; no type of grouping is implied by the columns in
the table. Table entries that are shaded gray are the default values for the corresponding GPIO pin.
Important: All GPIO pins are configured as GPIOs and tri-stated by default (GPIOAFSEL=0,
GPIODEN=0, GPIOPDR=0, GPIOPUR=0, and GPIOPCTL=0, with the exception of the
pins shown in the table below. A Power-On-Reset (POR) or asserting RST puts the pins
back to their default state.
Table 9-1. GPIO Pins With Non-Zero Reset Values
GPIO Pins
Default State
PA[1:0]
UART0
GPIOAFSEL GPIODEN GPIOPDR GPIOPUR
0
1
0
GPIOPCTL
0
0x1
PA[5:2]
SSI0
0
1
0
0
0x1
PB[3:2]
I2C0
0
1
0
0
0x3
PC[3:0]
JTAG/SWD
1
1
0
1
0x1
Table 9-2. GPIO Pins and Alternate Functions (100LQFP)
a
Digital Function (GPIOPCTL PMCx Bit Field Encoding)
IO
Pin
Analog
Function
1
2
3
4
5
6
7
8
9
10
11
PA0
26
-
U0Rx
-
-
-
-
-
-
I2C1SCL
U1Rx
-
-
PA1
27
-
U0Tx
-
-
-
-
-
-
I2C1SDA
U1Tx
-
-
PA2
28
-
SSI0Clk
-
-
-
-
-
-
-
-
-
-
PA3
29
-
SSI0Fss
-
-
-
-
-
-
-
-
-
-
PA4
30
-
SSI0Rx
-
-
-
-
-
-
-
-
-
-
PA5
31
-
SSI0Tx
-
-
-
-
-
-
-
-
-
-
PA6
34
-
I2C1SCL
CCP1
-
-
-
-
-
-
-
-
-
PA7
35
-
I2C1SDA
CCP4
-
-
-
-
CCP3
-
-
-
-
PB0
66
-
CCP0
-
-
-
U1Rx
-
-
-
-
-
-
PB1
67
-
CCP2
-
-
CCP1
U1Tx
-
-
-
-
-
-
PB2
70
-
I2C0SCL
-
-
CCP3
CCP0
-
-
-
-
-
-
PB3
71
-
I2C0SDA
-
-
-
-
-
-
-
-
-
-
PB4
92
AIN10
-
-
-
U2Rx
-
-
U1Rx
-
-
-
-
PB5
91
AIN11
-
CCP5
CCP6
CCP0
-
CCP2
U1Tx
-
-
-
-
PB6
90
VREFA
CCP1
CCP7
-
-
-
CCP5
-
-
-
-
-
PB7
89
-
-
-
-
NMI
-
-
-
-
-
-
-
PC0
80
-
-
-
TCK
SWCLK
-
-
-
-
-
-
-
-
PC1
79
-
-
-
TMS
SWDIO
-
-
-
-
-
-
-
-
PC2
78
-
-
-
TDI
-
-
-
-
-
-
-
-
PC3
77
-
-
-
TDO
SWO
-
-
-
-
-
-
-
-
PC4
25
-
CCP5
-
-
-
CCP2
CCP4
-
-
CCP1
-
-
396
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 9-2. GPIO Pins and Alternate Functions (100LQFP) (continued)
a
Digital Function (GPIOPCTL PMCx Bit Field Encoding)
IO
Pin
Analog
Function
1
2
3
4
5
6
7
8
9
10
11
PC5
24
-
CCP1
-
-
-
CCP3
-
-
-
-
-
-
PC6
23
-
CCP3
-
-
-
U1Rx
CCP0
-
-
-
-
-
PC7
22
-
CCP4
-
-
CCP0
U1Tx
-
-
-
-
-
-
PD0
10
AIN15
-
-
-
U2Rx
U1Rx
CCP6
-
-
-
-
-
PD1
11
AIN14
-
-
-
U2Tx
U1Tx
CCP7
-
-
-
CCP2
-
PD2
12
AIN13
U1Rx
CCP6
-
CCP5
-
-
-
-
-
-
-
PD3
13
AIN12
U1Tx
CCP7
-
CCP0
-
-
-
-
-
-
-
PD4
95
AIN7
CCP0
CCP3
-
-
-
-
-
-
-
-
-
PD5
96
AIN6
CCP2
CCP4
-
-
-
-
-
-
U2Rx
-
-
PD6
99
AIN5
-
-
-
-
-
-
-
-
U2Tx
-
-
PD7
100
AIN4
-
-
CCP1
-
-
-
-
-
-
-
-
PE0
72
-
-
SSI1Clk
CCP3
-
-
-
-
-
-
-
-
PE1
73
-
-
SSI1Fss
-
CCP2
CCP6
-
-
-
-
-
-
PE2
74
AIN9
CCP4
SSI1Rx
-
-
CCP2
-
-
-
-
-
-
PE3
75
AIN8
CCP1
SSI1Tx
-
-
CCP7
-
-
-
-
-
-
PE4
6
AIN3
CCP3
-
-
-
U2Tx
CCP2
-
-
-
-
-
PE5
5
AIN2
CCP5
-
-
-
-
-
-
-
-
-
-
PE6
2
AIN1
-
-
-
-
-
-
-
-
-
-
-
PE7
1
AIN0
-
-
-
-
-
-
-
-
-
-
-
PF0
47
-
-
-
-
-
-
-
-
-
U1DSR
-
-
PF1
61
-
-
-
-
-
-
-
-
-
-
CCP3
-
PF2
60
-
-
-
-
-
-
-
-
-
SSI1Clk
-
-
PF3
59
-
-
-
-
-
-
-
-
-
SSI1Fss
-
-
PF4
58
-
CCP0
-
-
-
-
-
-
-
SSI1Rx
-
-
PF5
46
-
CCP2
-
-
-
-
-
-
-
SSI1Tx
-
-
PF6
43
-
CCP1
-
-
-
-
-
-
-
-
-
-
PF7
42
-
CCP4
-
-
-
-
-
-
-
-
-
-
PG0
19
-
U2Rx
-
I2C1SCL
-
-
-
-
-
-
-
-
PG1
18
-
U2Tx
-
I2C1SDA
-
-
-
-
-
-
-
-
PG2
17
-
-
-
-
-
-
-
-
-
-
-
-
PG3
16
-
-
-
-
-
-
-
-
-
-
-
-
PG4
41
-
CCP3
-
-
-
-
-
-
-
-
-
-
PG5
40
-
CCP5
-
-
-
-
-
-
-
-
-
-
PG6
37
-
-
-
-
-
-
-
-
-
-
-
-
PG7
36
-
-
-
-
-
-
-
-
CCP5
-
-
-
PH0
86
-
CCP6
-
-
-
-
-
-
-
-
-
-
PH1
85
-
CCP7
-
-
-
-
-
-
-
-
-
-
PH2
84
-
-
-
-
-
-
-
-
-
-
-
-
PH3
83
-
-
-
-
-
-
-
-
-
-
-
-
a. The digital signals that are shaded gray are the power-on default values for the corresponding GPIO pin.
July 25, 2011
397
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Table 9-3. GPIO Pins and Alternate Functions (108BGA)
a
Digital Function (GPIOPCTL PMCx Bit Field Encoding)
IO
Pin
Analog
Function
1
2
3
4
5
6
7
8
9
10
11
PA0
L3
-
U0Rx
-
-
-
-
-
-
I2C1SCL
U1Rx
-
-
PA1
M3
-
U0Tx
-
-
-
-
-
-
I2C1SDA
U1Tx
-
-
PA2
M4
-
SSI0Clk
-
-
-
-
-
-
-
-
-
-
PA3
L4
-
SSI0Fss
-
-
-
-
-
-
-
-
-
-
PA4
L5
-
SSI0Rx
-
-
-
-
-
-
-
-
-
-
PA5
M5
-
SSI0Tx
-
-
-
-
-
-
-
-
-
-
PA6
L6
-
I2C1SCL
CCP1
-
-
-
-
-
-
-
-
-
PA7
M6
-
I2C1SDA
CCP4
-
-
-
-
CCP3
-
-
-
-
PB0
E12
-
CCP0
-
-
-
U1Rx
-
-
-
-
-
-
PB1
D12
-
CCP2
-
-
CCP1
U1Tx
-
-
-
-
-
-
PB2
C11
-
I2C0SCL
-
-
CCP3
CCP0
-
-
-
-
-
-
PB3
C12
-
I2C0SDA
-
-
-
-
-
-
-
-
-
-
PB4
A6
AIN10
-
-
-
U2Rx
-
-
U1Rx
-
-
-
-
PB5
B7
AIN11
-
CCP5
CCP6
CCP0
-
CCP2
U1Tx
-
-
-
-
PB6
A7
VREFA
CCP1
CCP7
-
-
-
CCP5
-
-
-
-
-
PB7
A8
-
-
-
-
NMI
-
-
-
-
-
-
-
PC0
A9
-
-
-
TCK
SWCLK
-
-
-
-
-
-
-
-
PC1
B9
-
-
-
TMS
SWDIO
-
-
-
-
-
-
-
-
PC2
B8
-
-
-
TDI
-
-
-
-
-
-
-
-
PC3
A10
-
-
-
TDO
SWO
-
-
-
-
-
-
-
-
PC4
L1
-
CCP5
-
-
-
CCP2
CCP4
-
-
CCP1
-
-
PC5
M1
-
CCP1
-
-
-
CCP3
-
-
-
-
-
-
PC6
M2
-
CCP3
-
-
-
U1Rx
CCP0
-
-
-
-
-
PC7
L2
-
CCP4
-
-
CCP0
U1Tx
-
-
-
-
-
-
PD0
G1
AIN15
-
-
-
U2Rx
U1Rx
CCP6
-
-
-
-
-
PD1
G2
AIN14
-
-
-
U2Tx
U1Tx
CCP7
-
-
-
CCP2
-
PD2
H2
AIN13
U1Rx
CCP6
-
CCP5
-
-
-
-
-
-
-
PD3
H1
AIN12
U1Tx
CCP7
-
CCP0
-
-
-
-
-
-
-
PD4
A4
AIN7
CCP0
CCP3
-
-
-
-
-
-
-
-
-
PD5
B4
AIN6
CCP2
CCP4
-
-
-
-
-
-
U2Rx
-
-
PD6
A3
AIN5
-
-
-
-
-
-
-
-
U2Tx
-
-
PD7
A2
AIN4
-
-
CCP1
-
-
-
-
-
-
-
-
PE0
A11
-
-
SSI1Clk
CCP3
-
-
-
-
-
-
-
-
PE1
B12
-
-
SSI1Fss
-
CCP2
CCP6
-
-
-
-
-
-
PE2
B11
AIN9
CCP4
SSI1Rx
-
-
CCP2
-
-
-
-
-
-
PE3
A12
AIN8
CCP1
SSI1Tx
-
-
CCP7
-
-
-
-
-
-
PE4
B2
AIN3
CCP3
-
-
-
U2Tx
CCP2
-
-
-
-
-
PE5
B3
AIN2
CCP5
-
-
-
-
-
-
-
-
-
-
398
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 9-3. GPIO Pins and Alternate Functions (108BGA) (continued)
a
Digital Function (GPIOPCTL PMCx Bit Field Encoding)
IO
Pin
Analog
Function
1
2
3
4
5
6
7
8
9
10
11
PE6
A1
AIN1
-
-
-
-
-
-
-
-
-
-
-
PE7
B1
AIN0
-
-
-
-
-
-
-
-
-
-
-
PF0
M9
-
-
-
-
-
-
-
-
-
U1DSR
-
-
PF1
H12
-
-
-
-
-
-
-
-
-
-
CCP3
-
PF2
J11
-
-
-
-
-
-
-
-
-
SSI1Clk
-
-
PF3
J12
-
-
-
-
-
-
-
-
-
SSI1Fss
-
-
PF4
L9
-
CCP0
-
-
-
-
-
-
-
SSI1Rx
-
-
PF5
L8
-
CCP2
-
-
-
-
-
-
-
SSI1Tx
-
-
PF6
M8
-
CCP1
-
-
-
-
-
-
-
-
-
-
PF7
K4
-
CCP4
-
-
-
-
-
-
-
-
-
-
PG0
K1
-
U2Rx
-
I2C1SCL
-
-
-
-
-
-
-
-
PG1
K2
-
U2Tx
-
I2C1SDA
-
-
-
-
-
-
-
-
PG2
J1
-
-
-
-
-
-
-
-
-
-
-
-
PG3
J2
-
-
-
-
-
-
-
-
-
-
-
-
PG4
K3
-
CCP3
-
-
-
-
-
-
-
-
-
-
PG5
M7
-
CCP5
-
-
-
-
-
-
-
-
-
-
PG6
L7
-
-
-
-
-
-
-
-
-
-
-
-
PG7
C10
-
-
-
-
-
-
-
-
CCP5
-
-
-
PH0
C9
-
CCP6
-
-
-
-
-
-
-
-
-
-
PH1
C8
-
CCP7
-
-
-
-
-
-
-
-
-
-
PH2
D11
-
-
-
-
-
-
-
-
-
-
-
-
PH3
D10
-
-
-
-
-
-
-
-
-
-
-
-
a. The digital signals that are shaded gray are the power-on default values for the corresponding GPIO pin.
9.2
Functional Description
Each GPIO port is a separate hardware instantiation of the same physical block (see Figure
9-1 on page 400 and Figure 9-2 on page 401). The LM3S1G58 microcontroller contains eightports
and thus eight of these physical GPIO blocks. Note that not all pins may be implemented on every
block. Some GPIO pins can function as I/O signals for the on-chip peripheral modules. For information
on which GPIO pins are used for alternate hardware functions, refer to Table 17-5 on page 757.
July 25, 2011
399
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Figure 9-1. Digital I/O Pads
Commit
Control
GPIOLOCK
GPIOCR
Port
Control
GPIOPCTL
Mode
Control
GPIOAFSEL
Periph 1
DEMUX
Alternate Input
Alternate Output
Alternate Output Enable
MUX
Periph 0
Pad Input
Periph n
GPIO Output
GPIO Output Enable
Interrupt
Control
Pad
Control
GPIOIS
GPIOIBE
GPIOIEV
GPIOIM
GPIORIS
GPIOMIS
GPIOICR
GPIODR2R
GPIODR4R
GPIODR8R
GPIOSLR
GPIOPUR
GPIOPDR
GPIOODR
GPIODEN
MUX
GPIODATA
GPIODIR
Interrupt
MUX
GPIO Input
Data
Control
Pad Output
Digital
I/O
Pad
Package I/O Pin
Pad Output
Enable
Identification Registers
GPIOPeriphID0
GPIOPeriphID1
GPIOPeriphID2
GPIOPeriphID3
GPIOPeriphID4
GPIOPeriphID5
GPIOPeriphID6
GPIOPeriphID7
GPIOPCellID0
GPIOPCellID1
GPIOPCellID2
GPIOPCellID3
400
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 9-2. Analog/Digital I/O Pads
Commit
Control
GPIOLOCK
GPIOCR
Port
Control
GPIOPCTL
Mode
Control
GPIOAFSEL
Periph 1
DEMUX
Alternate Input
Alternate Output
Alternate Output Enable
MUX
Periph 0
Pad Input
Periph n
MUX
MUX
Data
Control
Pad Output
Pad Output Enable
Analog/Digital
I/O Pad
Package I/O Pin
GPIO Input
GPIO Output
GPIODATA
GPIODIR
Interrupt
GPIO Output Enable
Interrupt
Control
GPIOIS
GPIOIBE
GPIOIEV
GPIOIM
GPIORIS
GPIOMIS
GPIOICR
Pad
Control
GPIODR2R
GPIODR4R
GPIODR8R
GPIOSLR
GPIOPUR
GPIOPDR
GPIOODR
GPIODEN
GPIOAMSEL
Analog Circuitry
Identification Registers
GPIOPeriphID0
GPIOPeriphID1
GPIOPeriphID2
GPIOPeriphID3
9.2.1
GPIOPeriphID4
GPIOPeriphID5
GPIOPeriphID6
GPIOPeriphID7
GPIOPCellID0
GPIOPCellID1
GPIOPCellID2
GPIOPCellID3
ADC
(for GPIO pins that
connect to the ADC
input MUX)
Isolation
Circuit
Data Control
The data control registers allow software to configure the operational modes of the GPIOs. The data
direction register configures the GPIO as an input or an output while the data register either captures
incoming data or drives it out to the pads.
Caution – It is possible to create a software sequence that prevents the debugger from connecting to
the Stellaris® microcontroller. If the program code loaded into flash immediately changes the JTAG
pins to their GPIO functionality, the debugger may not have enough time to connect and halt the
controller before the JTAG pin functionality switches. As a result, the debugger may be locked out of
the part. This issue can be avoided with a software routine that restores JTAG functionality based on
an external or software trigger.
9.2.1.1
Data Direction Operation
The GPIO Direction (GPIODIR) register (see page 409) is used to configure each individual pin as
an input or output. When the data direction bit is cleared, the GPIO is configured as an input, and
the corresponding data register bit captures and stores the value on the GPIO port. When the data
direction bit is set, the GPIO is configured as an output, and the corresponding data register bit is
driven out on the GPIO port.
July 25, 2011
401
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
9.2.1.2
Data Register Operation
To aid in the efficiency of software, the GPIO ports allow for the modification of individual bits in the
GPIO Data (GPIODATA) register (see page 408) by using bits [9:2] of the address bus as a mask.
In this manner, software drivers can modify individual GPIO pins in a single instruction without
affecting the state of the other pins. This method is more efficient than the conventional method of
performing a read-modify-write operation to set or clear an individual GPIO pin. To implement this
feature, the GPIODATA register covers 256 locations in the memory map.
During a write, if the address bit associated with that data bit is set, the value of the GPIODATA
register is altered. If the address bit is cleared, the data bit is left unchanged.
For example, writing a value of 0xEB to the address GPIODATA + 0x098 has the results shown in
Figure 9-3, where u indicates that data is unchanged by the write.
Figure 9-3. GPIODATA Write Example
ADDR[9:2]
0x098
9
8
7
6
5
4
3
2
1
0
0
0
1
0
0
1
1
0
0
0
0xEB
1
1
1
0
1
0
1
1
GPIODATA
u
u
1
u
u
0
1
u
7
6
5
4
3
2
1
0
During a read, if the address bit associated with the data bit is set, the value is read. If the address
bit associated with the data bit is cleared, the data bit is read as a zero, regardless of its actual
value. For example, reading address GPIODATA + 0x0C4 yields as shown in Figure 9-4.
Figure 9-4. GPIODATA Read Example
9.2.2
ADDR[9:2]
0x0C4
9
8
7
6
5
4
3
2
1
0
0
0
1
1
0
0
0
1
0
0
GPIODATA
1
0
1
1
1
1
1
0
Returned Value
0
0
1
1
0
0
0
0
7
6
5
4
3
2
1
0
Interrupt Control
The interrupt capabilities of each GPIO port are controlled by a set of seven registers. These registers
are used to select the source of the interrupt, its polarity, and the edge properties. When one or
more GPIO inputs cause an interrupt, a single interrupt output is sent to the interrupt controller for
the entire GPIO port. For edge-triggered interrupts, software must clear the interrupt to enable any
further interrupts. For a level-sensitive interrupt, the external source must hold the level constant
for the interrupt to be recognized by the controller.
Three registers define the edge or sense that causes interrupts:
■ GPIO Interrupt Sense (GPIOIS) register (see page 410)
402
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ GPIO Interrupt Both Edges (GPIOIBE) register (see page 411)
■ GPIO Interrupt Event (GPIOIEV) register (see page 412)
Interrupts are enabled/disabled via the GPIO Interrupt Mask (GPIOIM) register (see page 413).
When an interrupt condition occurs, the state of the interrupt signal can be viewed in two locations:
the GPIO Raw Interrupt Status (GPIORIS) and GPIO Masked Interrupt Status (GPIOMIS) registers
(see page 414 and page 415). As the name implies, the GPIOMIS register only shows interrupt
conditions that are allowed to be passed to the interrupt controller. The GPIORIS register indicates
that a GPIO pin meets the conditions for an interrupt, but has not necessarily been sent to the
interrupt controller.
Interrupts are cleared by writing a 1 to the appropriate bit of the GPIO Interrupt Clear (GPIOICR)
register (see page 417).
When programming the interrupt control registers (GPIOIS, GPIOIBE, or GPIOIEV), the interrupts
should be masked (GPIOIM cleared). Writing any value to an interrupt control register can generate
a spurious interrupt if the corresponding bits are enabled.
9.2.2.1
ADC Trigger Source
In addition to providing GPIO functionality, PB4 can also be used as an external trigger for the ADC.
If PB4 is configured as a non-masked interrupt pin (the appropriate bit of GPIOIM is set), an interrupt
for Port B is generated, and an external trigger signal is sent to the ADC. If the ADC Event
Multiplexer Select (ADCEMUX) register is configured to use the external trigger, an ADC conversion
is initiated. See page 552.
If no other Port B pins are being used to generate interrupts, the Interrupt 0-31 Set Enable (EN0)
register can disable the Port B interrupts, and the ADC interrupt can be used to read back the
converted data. Otherwise, the Port B interrupt handler must ignore and clear interrupts on PB4 and
wait for the ADC interrupt, or the ADC interrupt must be disabled in the EN0 register and the Port
B interrupt handler must poll the ADC registers until the conversion is completed. See page 105 for
more information.
9.2.3
Mode Control
The GPIO pins can be controlled by either software or hardware. Software control is the default for
most signals and corresponds to the GPIO mode, where the GPIODATA register is used to read
or write the corresponding pins. When hardware control is enabled via the GPIO Alternate Function
Select (GPIOAFSEL) register (see page 418), the pin state is controlled by its alternate function
(that is, the peripheral).
Further pin muxing options are provided through the GPIO Port Control (GPIOPCTL) register which
selects one of several peripheral functions for each GPIO. For information on the configuration
options, refer to Table 17-5 on page 757.
Note:
9.2.4
If any pin is to be used as an ADC input, the appropriate bit in the GPIOAMSEL register
must be set to disable the analog isolation circuit.
Commit Control
The GPIO commit control registers provide a layer of protection against accidental programming of
critical hardware peripherals. Protection is provided for the NMI pin (PB7) and the four JTAG/SWD
pins (PC[3:0]). Writes to protected bits of the GPIO Alternate Function Select (GPIOAFSEL)
register (see page 418), GPIO Pull Up Select (GPIOPUR) register (see page 424), GPIO Pull-Down
Select (GPIOPDR) register (see page 426), and GPIO Digital Enable (GPIODEN) register (see
July 25, 2011
403
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
page 429) are not committed to storage unless the GPIO Lock (GPIOLOCK) register (see page 431)
has been unlocked and the appropriate bits of the GPIO Commit (GPIOCR) register (see page 432)
have been set.
9.2.5
Pad Control
The pad control registers allow software to configure the GPIO pads based on the application
requirements. The pad control registers include the GPIODR2R, GPIODR4R, GPIODR8R, GPIOODR,
GPIOPUR, GPIOPDR, GPIOSLR, and GPIODEN registers. These registers control drive strength,
open-drain configuration, pull-up and pull-down resistors, slew-rate control and digital input enable
for each GPIO.
For special high-current applications, the GPIO output buffers may be used with the following
restrictions. With the GPIO pins configured as 8-mA output drivers, a total of four GPIO outputs may
be used to sink current loads up to 18 mA each. At 18-mA sink current loading, the VOL value is
specified as 1.2 V. The high-current GPIO package pins must be selected such that there are only
a maximum of two per side of the physical package or BGA pin group with the total number of
high-current GPIO outputs not exceeding four for the entire package.
9.2.6
Identification
The identification registers configured at reset allow software to detect and identify the module as
a GPIO block. The identification registers include the GPIOPeriphID0-GPIOPeriphID7 registers as
well as the GPIOPCellID0-GPIOPCellID3 registers.
9.3
Initialization and Configuration
The GPIO modules may be accessed via two different memory apertures. The legacy aperture, the
Advanced Peripheral Bus (APB), is backwards-compatible with previous Stellaris parts. The other
aperture, the Advanced High-Performance Bus (AHB), offers the same register map but provides
better back-to-back access performance than the APB bus. These apertures are mutually exclusive.
The aperture enabled for a given GPIO port is controlled by the appropriate bit in the GPIOHBCTL
register (see page 203).
To use the pins in a particular GPIO port, the clock for the port must be enabled by setting the
appropriate GPIO Port bit field (GPIOn) in the RCGC2 register (see page 251).
When the internal POR signal is asserted and until otherwise configured, all GPIO pins are configured
to be undriven (tristate): GPIOAFSEL=0, GPIODEN=0, GPIOPDR=0, and GPIOPUR=0, except for
the pins shown in Table 9-1 on page 396. Table 9-4 on page 404 shows all possible configurations
of the GPIO pads and the control register settings required to achieve them. Table 9-5 on page 405
shows how a rising edge interrupt is configured for pin 2 of a GPIO port.
Table 9-4. GPIO Pad Configuration Examples
a
Configuration
Digital Input (GPIO)
GPIO Register Bit Value
AFSEL
0
DIR
ODR
0
0
DEN
1
PUR
?
PDR
?
DR2R
DR4R
DR8R
X
X
X
SLR
X
Digital Output (GPIO)
0
1
0
1
?
?
?
?
?
?
Open Drain Output
(GPIO)
0
1
1
1
X
X
?
?
?
?
Open Drain
Input/Output (I2C)
1
X
1
1
X
X
?
?
?
?
Digital Input (Timer
CCP)
1
X
0
1
?
?
X
X
X
X
404
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 9-4. GPIO Pad Configuration Examples (continued)
a
GPIO Register Bit Value
Configuration
DR2R
DR4R
DR8R
Digital Output (Timer
PWM)
AFSEL
1
DIR
X
ODR
0
DEN
1
PUR
?
PDR
?
?
?
?
SLR
?
Digital Input/Output
(SSI)
1
X
0
1
?
?
?
?
?
?
Digital Input/Output
(UART)
1
X
0
1
?
?
?
?
?
?
a. X=Ignored (don’t care bit)
?=Can be either 0 or 1, depending on the configuration
Table 9-5. GPIO Interrupt Configuration Example
Desired Interrupt
Event Trigger
Register
GPIOIS
0=edge
a
Pin 2 Bit Value
7
6
5
4
3
2
1
0
X
X
X
X
X
0
X
X
X
X
X
X
X
0
X
X
X
X
X
X
X
1
X
X
0
0
0
0
0
1
0
0
1=level
GPIOIBE
0=single edge
1=both edges
GPIOIEV
0=Low level, or falling
edge
1=High level, or rising
edge
GPIOIM
0=masked
1=not masked
a. X=Ignored (don’t care bit)
9.4
Register Map
Table 9-7 on page 406 lists the GPIO registers. Each GPIO port can be accessed through one of
two bus apertures. The legacy aperture, the Advanced Peripheral Bus (APB), is backwards-compatible
with previous Stellaris parts. The other aperture, the Advanced High-Performance Bus (AHB), offers
the same register map but provides better back-to-back access performance than the APB bus.
Important: The GPIO registers in this chapter are duplicated in each GPIO block; however,
depending on the block, all eight bits may not be connected to a GPIO pad. In those
cases, writing to unconnected bits has no effect, and reading unconnected bits returns
no meaningful data.
The offset listed is a hexadecimal increment to the register’s address, relative to that GPIO port’s
base address:
■
■
■
■
■
■
■
■
GPIO Port A (APB): 0x4000.4000
GPIO Port A (AHB): 0x4005.8000
GPIO Port B (APB): 0x4000.5000
GPIO Port B (AHB): 0x4005.9000
GPIO Port C (APB): 0x4000.6000
GPIO Port C (AHB): 0x4005.A000
GPIO Port D (APB): 0x4000.7000
GPIO Port D (AHB): 0x4005.B000
July 25, 2011
405
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
■
■
■
■
■
■
■
■
GPIO Port E (APB): 0x4002.4000
GPIO Port E (AHB): 0x4005.C000
GPIO Port F (APB): 0x4002.5000
GPIO Port F (AHB): 0x4005.D000
GPIO Port G (APB): 0x4002.6000
GPIO Port G (AHB): 0x4005.E000
GPIO Port H (APB): 0x4002.7000
GPIO Port H (AHB): 0x4005.F000
Note that each GPIO module clock must be enabled before the registers can be programmed (see
page 251). There must be a delay of 3 system clocks after the GPIO module clock is enabled before
any GPIO module registers are accessed.
Important: All GPIO pins are configured as GPIOs and tri-stated by default (GPIOAFSEL=0,
GPIODEN=0, GPIOPDR=0, GPIOPUR=0, and GPIOPCTL=0, with the exception of the
pins shown in the table below. A Power-On-Reset (POR) or asserting RST puts the pins
back to their default state.
Table 9-6. GPIO Pins With Non-Zero Reset Values
GPIO Pins
Default State
GPIOAFSEL GPIODEN GPIOPDR GPIOPUR
GPIOPCTL
PA[1:0]
UART0
0
1
0
0
0x1
PA[5:2]
SSI0
0
1
0
0
0x1
PB[3:2]
I2C0
0
1
0
0
0x3
PC[3:0]
JTAG/SWD
1
1
0
1
0x1
The default register type for the GPIOCR register is RO for all GPIO pins with the exception of the
NMI pin and the four JTAG/SWD pins (PB7 and PC[3:0]). These five pins are the only GPIOs that
are protected by the GPIOCR register. Because of this, the register type for GPIO Port B7 and GPIO
Port C[3:0] is R/W.
The default reset value for the GPIOCR register is 0x0000.00FF for all GPIO pins, with the exception
of the NMI pin and the four JTAG/SWD pins (PB7 and PC[3:0]). To ensure that the JTAG port is
not accidentally programmed as GPIO pins, the PC[3:0] pins default to non-committable. Similarly,
to ensure that the NMI pin is not accidentally programmed as a GPIO pin, the PB7 pin defaults to
non-committable. Because of this, the default reset value of GPIOCR for GPIO Port B is 0x0000.007F
while the default reset value of GPIOCR for Port C is 0x0000.00F0.
Table 9-7. GPIO Register Map
Description
See
page
Offset
Name
Type
Reset
0x000
GPIODATA
R/W
0x0000.0000
GPIO Data
408
0x400
GPIODIR
R/W
0x0000.0000
GPIO Direction
409
0x404
GPIOIS
R/W
0x0000.0000
GPIO Interrupt Sense
410
0x408
GPIOIBE
R/W
0x0000.0000
GPIO Interrupt Both Edges
411
0x40C
GPIOIEV
R/W
0x0000.0000
GPIO Interrupt Event
412
0x410
GPIOIM
R/W
0x0000.0000
GPIO Interrupt Mask
413
0x414
GPIORIS
RO
0x0000.0000
GPIO Raw Interrupt Status
414
406
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 9-7. GPIO Register Map (continued)
Offset
Name
0x418
Reset
GPIOMIS
RO
0x0000.0000
GPIO Masked Interrupt Status
415
0x41C
GPIOICR
W1C
0x0000.0000
GPIO Interrupt Clear
417
0x420
GPIOAFSEL
R/W
-
GPIO Alternate Function Select
418
0x500
GPIODR2R
R/W
0x0000.00FF
GPIO 2-mA Drive Select
420
0x504
GPIODR4R
R/W
0x0000.0000
GPIO 4-mA Drive Select
421
0x508
GPIODR8R
R/W
0x0000.0000
GPIO 8-mA Drive Select
422
0x50C
GPIOODR
R/W
0x0000.0000
GPIO Open Drain Select
423
0x510
GPIOPUR
R/W
-
GPIO Pull-Up Select
424
0x514
GPIOPDR
R/W
0x0000.0000
GPIO Pull-Down Select
426
0x518
GPIOSLR
R/W
0x0000.0000
GPIO Slew Rate Control Select
428
0x51C
GPIODEN
R/W
-
GPIO Digital Enable
429
0x520
GPIOLOCK
R/W
0x0000.0001
GPIO Lock
431
0x524
GPIOCR
-
-
GPIO Commit
432
0x528
GPIOAMSEL
R/W
0x0000.0000
GPIO Analog Mode Select
434
0x52C
GPIOPCTL
R/W
-
GPIO Port Control
435
0xFD0
GPIOPeriphID4
RO
0x0000.0000
GPIO Peripheral Identification 4
437
0xFD4
GPIOPeriphID5
RO
0x0000.0000
GPIO Peripheral Identification 5
438
0xFD8
GPIOPeriphID6
RO
0x0000.0000
GPIO Peripheral Identification 6
439
0xFDC
GPIOPeriphID7
RO
0x0000.0000
GPIO Peripheral Identification 7
440
0xFE0
GPIOPeriphID0
RO
0x0000.0061
GPIO Peripheral Identification 0
441
0xFE4
GPIOPeriphID1
RO
0x0000.0000
GPIO Peripheral Identification 1
442
0xFE8
GPIOPeriphID2
RO
0x0000.0018
GPIO Peripheral Identification 2
443
0xFEC
GPIOPeriphID3
RO
0x0000.0001
GPIO Peripheral Identification 3
444
0xFF0
GPIOPCellID0
RO
0x0000.000D
GPIO PrimeCell Identification 0
445
0xFF4
GPIOPCellID1
RO
0x0000.00F0
GPIO PrimeCell Identification 1
446
0xFF8
GPIOPCellID2
RO
0x0000.0005
GPIO PrimeCell Identification 2
447
0xFFC
GPIOPCellID3
RO
0x0000.00B1
GPIO PrimeCell Identification 3
448
9.5
Description
See
page
Type
Register Descriptions
The remainder of this section lists and describes the GPIO registers, in numerical order by address
offset.
July 25, 2011
407
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 1: GPIO Data (GPIODATA), offset 0x000
The GPIODATA register is the data register. In software control mode, values written in the
GPIODATA register are transferred onto the GPIO port pins if the respective pins have been
configured as outputs through the GPIO Direction (GPIODIR) register (see page 409).
In order to write to GPIODATA, the corresponding bits in the mask, resulting from the address bus
bits [9:2], must be set. Otherwise, the bit values remain unchanged by the write.
Similarly, the values read from this register are determined for each bit by the mask bit derived from
the address used to access the data register, bits [9:2]. Bits that are set in the address mask cause
the corresponding bits in GPIODATA to be read, and bits that are clear in the address mask cause
the corresponding bits in GPIODATA to be read as 0, regardless of their value.
A read from GPIODATA returns the last bit value written if the respective pins are configured as
outputs, or it returns the value on the corresponding input pin when these are configured as inputs.
All bits are cleared by a reset.
GPIO Data (GPIODATA)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x000
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
DATA
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
DATA
R/W
0x00
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Data
This register is virtually mapped to 256 locations in the address space.
To facilitate the reading and writing of data to these registers by
independent drivers, the data read from and written to the registers are
masked by the eight address lines [9:2]. Reads from this register return
its current state. Writes to this register only affect bits that are not masked
by ADDR[9:2] and are configured as outputs. See “Data Register
Operation” on page 402 for examples of reads and writes.
408
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 2: GPIO Direction (GPIODIR), offset 0x400
The GPIODIR register is the data direction register. Setting a bit in the GPIODIR register configures
the corresponding pin to be an output, while clearing a bit configures the corresponding pin to be
an input. All bits are cleared by a reset, meaning all GPIO pins are inputs by default.
GPIO Direction (GPIODIR)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x400
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
DIR
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
DIR
R/W
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Data Direction
Value Description
0
Corresponding pin is an input.
1
Corresponding pins is an output.
July 25, 2011
409
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 3: GPIO Interrupt Sense (GPIOIS), offset 0x404
The GPIOIS register is the interrupt sense register. Setting a bit in the GPIOIS register configures
the corresponding pin to detect levels, while clearing a bit configures the corresponding pin to detect
edges. All bits are cleared by a reset.
GPIO Interrupt Sense (GPIOIS)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x404
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
IS
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
IS
R/W
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Interrupt Sense
Value Description
0
The edge on the corresponding pin is detected (edge-sensitive).
1
The level on the corresponding pin is detected (level-sensitive).
410
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 4: GPIO Interrupt Both Edges (GPIOIBE), offset 0x408
The GPIOIBE register allows both edges to cause interrupts. When the corresponding bit in the
GPIO Interrupt Sense (GPIOIS) register (see page 410) is set to detect edges, setting a bit in the
GPIOIBE register configures the corresponding pin to detect both rising and falling edges, regardless
of the corresponding bit in the GPIO Interrupt Event (GPIOIEV) register (see page 412). Clearing
a bit configures the pin to be controlled by the GPIOIEV register. All bits are cleared by a reset.
GPIO Interrupt Both Edges (GPIOIBE)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x408
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
IBE
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
IBE
R/W
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Interrupt Both Edges
Value Description
0
Interrupt generation is controlled by the GPIO Interrupt Event
(GPIOIEV) register (see page 412).
1
Both edges on the corresponding pin trigger an interrupt.
July 25, 2011
411
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 5: GPIO Interrupt Event (GPIOIEV), offset 0x40C
The GPIOIEV register is the interrupt event register. Setting a bit in the GPIOIEV register configures
the corresponding pin to detect rising edges or high levels, depending on the corresponding bit
value in the GPIO Interrupt Sense (GPIOIS) register (see page 410). Clearing a bit configures the
pin to detect falling edges or low levels, depending on the corresponding bit value in the GPIOIS
register. All bits are cleared by a reset.
GPIO Interrupt Event (GPIOIEV)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x40C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
IEV
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
IEV
R/W
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Interrupt Event
Value Description
0
A falling edge or a Low level on the corresponding pin triggers
an interrupt.
1
A rising edge or a High level on the corresponding pin triggers
an interrupt.
412
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 6: GPIO Interrupt Mask (GPIOIM), offset 0x410
The GPIOIM register is the interrupt mask register. Setting a bit in the GPIOIM register allows
interrupts that are generated by the corresponding pin to be sent to the interrupt controller on the
combined interrupt signal. Clearing a bit prevents an interrupt on the corresponding pin from being
sent to the interrupt controller. All bits are cleared by a reset.
GPIO Interrupt Mask (GPIOIM)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x410
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
IME
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0
7:0
IME
R/W
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Interrupt Mask Enable
Value Description
0
The interrupt from the corresponding pin is masked.
1
The interrupt from the corresponding pin is sent to the interrupt
controller.
July 25, 2011
413
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 7: GPIO Raw Interrupt Status (GPIORIS), offset 0x414
The GPIORIS register is the raw interrupt status register. A bit in this register is set when an interrupt
condition occurs on the corresponding GPIO pin. If the corresponding bit in the GPIO Interrupt
Mask (GPIOIM) register (see page 413) is set, the interrupt is sent to the interrupt controller. Bits
read as zero indicate that corresponding input pins have not initiated an interrupt. A bit in this register
can be cleared by writing a 1 to the corresponding bit in the GPIO Interrupt Clear (GPIOICR)
register.
GPIO Raw Interrupt Status (GPIORIS)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x414
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RIS
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0
7:0
RIS
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Interrupt Raw Status
Value Description
1
An interrupt condition has occurred on the corresponding pin.
0
An interrupt condition has not occurred on the corresponding
pin.
A bit is cleared by writing a 1 to the corresponding bit in the GPIOICR
register.
414
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 8: GPIO Masked Interrupt Status (GPIOMIS), offset 0x418
The GPIOMIS register is the masked interrupt status register. If a bit is set in this register, the
corresponding interrupt has triggered an interrupt to the interrupt controller. If a bit is clear, either
no interrupt has been generated, or the interrupt is masked.
In addition to providing GPIO functionality, PB4 can also be used as an external trigger for the ADC.
If PB4 is configured as a non-masked interrupt pin (the appropriate bit of GPIOIM is set), an interrupt
for Port B is generated, and an external trigger signal is sent to the ADC. If the ADC Event
Multiplexer Select (ADCEMUX) register is configured to use the external trigger, an ADC conversion
is initiated. See page 552.
If no other Port B pins are being used to generate interrupts, the Interrupt 0-31 Set Enable (EN0)
register can disable the Port B interrupts, and the ADC interrupt can be used to read back the
converted data. Otherwise, the Port B interrupt handler must ignore and clear interrupts on PB4 and
wait for the ADC interrupt, or the ADC interrupt must be disabled in the EN0 register and the Port
B interrupt handler must poll the ADC registers until the conversion is completed. See page 105 for
more information.
GPIOMIS is the state of the interrupt after masking.
GPIO Masked Interrupt Status (GPIOMIS)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x418
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
MIS
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
415
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Bit/Field
Name
Type
Reset
Description
7:0
MIS
RO
0x00
GPIO Masked Interrupt Status
Value Description
1
An interrupt condition on the corresponding pin has triggered
an interrupt to the interrupt controller.
0
An interrupt condition on the corresponding pin is masked or
has not occurred.
A bit is cleared by writing a 1 to the corresponding bit in the GPIOICR
register.
416
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 9: GPIO Interrupt Clear (GPIOICR), offset 0x41C
The GPIOICR register is the interrupt clear register. Writing a 1 to a bit in this register clears the
corresponding interrupt bit in the GPIORIS and GPIOMIS registers. Writing a 0 has no effect.
GPIO Interrupt Clear (GPIOICR)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x41C
Type W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
W1C
0
W1C
0
W1C
0
W1C
0
W1C
0
W1C
0
W1C
0
W1C
0
reserved
Type
Reset
reserved
Type
Reset
IC
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0
7:0
IC
W1C
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Interrupt Clear
Value Description
1
The corresponding interrupt is cleared.
0
The corresponding interrupt is unaffected.
July 25, 2011
417
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 10: GPIO Alternate Function Select (GPIOAFSEL), offset 0x420
The GPIOAFSEL register is the mode control select register. If a bit is clear, the pin is used as a
GPIO and is controlled by the GPIO registers. Setting a bit in this register configures the
corresponding GPIO line to be controlled by an associated peripheral. Several possible peripheral
functions are multiplexed on each GPIO. The GPIO Port Control (GPIOPCTL) register is used to
select one of the possible functions. Table 17-5 on page 757 details which functions are muxed on
each GPIO pin. The reset value for this register is 0x0000.0000 for GPIO ports that are not listed
in the table below.
Important: All GPIO pins are configured as GPIOs and tri-stated by default (GPIOAFSEL=0,
GPIODEN=0, GPIOPDR=0, GPIOPUR=0, and GPIOPCTL=0, with the exception of the
pins shown in the table below. A Power-On-Reset (POR) or asserting RST puts the pins
back to their default state.
Table 9-8. GPIO Pins With Non-Zero Reset Values
GPIO Pins
Default State
PA[1:0]
UART0
GPIOAFSEL GPIODEN GPIOPDR GPIOPUR
0
1
0
0
GPIOPCTL
0x1
PA[5:2]
SSI0
0
1
0
0
0x1
PB[3:2]
I2C0
0
1
0
0
0x3
PC[3:0]
JTAG/SWD
1
1
0
1
0x1
Caution – It is possible to create a software sequence that prevents the debugger from connecting to
the Stellaris microcontroller. If the program code loaded into flash immediately changes the JTAG pins
to their GPIO functionality, the debugger may not have enough time to connect and halt the controller
before the JTAG pin functionality switches. As a result, the debugger may be locked out of the part.
This issue can be avoided with a software routine that restores JTAG functionality based on an external
or software trigger.
The GPIO commit control registers provide a layer of protection against accidental programming of
critical hardware peripherals. Protection is provided for the NMI pin (PB7) and the four JTAG/SWD
pins (PC[3:0]). Writes to protected bits of the GPIO Alternate Function Select (GPIOAFSEL)
register (see page 418), GPIO Pull Up Select (GPIOPUR) register (see page 424), GPIO Pull-Down
Select (GPIOPDR) register (see page 426), and GPIO Digital Enable (GPIODEN) register (see
page 429) are not committed to storage unless the GPIO Lock (GPIOLOCK) register (see page 431)
has been unlocked and the appropriate bits of the GPIO Commit (GPIOCR) register (see page 432)
have been set.
When using the I2C module, in addition to setting the GPIOAFSEL register bits for the I2C clock
and data pins, the data pins should be set to open drain using the GPIO Open Drain Select
(GPIOODR) register (see examples in “Initialization and Configuration” on page 404).
418
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
GPIO Alternate Function Select (GPIOAFSEL)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x420
Type R/W, reset 31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
reserved
Type
Reset
reserved
Type
Reset
AFSEL
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
AFSEL
R/W
-
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Alternate Function Select
Value Description
0
The associated pin functions as a GPIO and is controlled by
the GPIO registers.
1
The associated pin functions as a peripheral signal and is
controlled by the alternate hardware function.
The reset value for this register is 0x0000.0000 for GPIO ports
that are not listed in Table 9-1 on page 396.
July 25, 2011
419
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 11: GPIO 2-mA Drive Select (GPIODR2R), offset 0x500
The GPIODR2R register is the 2-mA drive control register. Each GPIO signal in the port can be
individually configured without affecting the other pads. When setting the DRV2 bit for a GPIO signal,
the corresponding DRV4 bit in the GPIODR4R register and DRV8 bit in the GPIODR8R register are
automatically cleared by hardware. By default, all GPIO pins have 2-mA drive.
GPIO 2-mA Drive Select (GPIODR2R)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x500
Type R/W, reset 0x0000.00FF
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
reserved
Type
Reset
reserved
Type
Reset
DRV2
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
DRV2
R/W
0xFF
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Output Pad 2-mA Drive Enable
Value Description
1
The corresponding GPIO pin has 2-mA drive.
0
The drive for the corresponding GPIO pin is controlled by the
GPIODR4R or GPIODR8R register.
Setting a bit in either the GPIODR4 register or the GPIODR8 register
clears the corresponding 2-mA enable bit. The change is effective on
the second clock cycle after the write if accessing GPIO via the APB
memory aperture. If using AHB access, the change is effective on the
next clock cycle.
420
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 12: GPIO 4-mA Drive Select (GPIODR4R), offset 0x504
The GPIODR4R register is the 4-mA drive control register. Each GPIO signal in the port can be
individually configured without affecting the other pads. When setting the DRV4 bit for a GPIO signal,
the corresponding DRV2 bit in the GPIODR2R register and DRV8 bit in the GPIODR8R register are
automatically cleared by hardware.
GPIO 4-mA Drive Select (GPIODR4R)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x504
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
DRV4
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
DRV4
R/W
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Output Pad 4-mA Drive Enable
Value Description
1
The corresponding GPIO pin has 4-mA drive.
0
The drive for the corresponding GPIO pin is controlled by the
GPIODR2R or GPIODR8R register.
Setting a bit in either the GPIODR2 register or the GPIODR8 register
clears the corresponding 4-mA enable bit. The change is effective on
the second clock cycle after the write if accessing GPIO via the APB
memory aperture. If using AHB access, the change is effective on the
next clock cycle.
July 25, 2011
421
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 13: GPIO 8-mA Drive Select (GPIODR8R), offset 0x508
The GPIODR8R register is the 8-mA drive control register. Each GPIO signal in the port can be
individually configured without affecting the other pads. When setting the DRV8 bit for a GPIO signal,
the corresponding DRV2 bit in the GPIODR2R register and DRV4 bit in the GPIODR4R register are
automatically cleared by hardware. The 8-mA setting is also used for high-current operation.
Note:
There is no configuration difference between 8-mA and high-current operation. The additional
current capacity results from a shift in the VOH/VOL levels. See “Recommended Operating
Conditions” on page 785 for further information.
GPIO 8-mA Drive Select (GPIODR8R)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x508
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
DRV8
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
DRV8
R/W
0x00
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Output Pad 8-mA Drive Enable
Value Description
1
The corresponding GPIO pin has 8-mA drive.
0
The drive for the corresponding GPIO pin is controlled by the
GPIODR2R or GPIODR4R register.
Setting a bit in either the GPIODR2 register or the GPIODR4 register
clears the corresponding 8-mA enable bit. The change is effective on
the second clock cycle after the write if accessing GPIO via the APB
memory aperture. If using AHB access, the change is effective on the
next clock cycle.
422
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 14: GPIO Open Drain Select (GPIOODR), offset 0x50C
The GPIOODR register is the open drain control register. Setting a bit in this register enables the
open-drain configuration of the corresponding GPIO pad. When open-drain mode is enabled, the
corresponding bit should also be set in the GPIO Digital Enable (GPIODEN) register (see page 429).
Corresponding bits in the drive strength and slew rate control registers (GPIODR2R, GPIODR4R,
GPIODR8R, and GPIOSLR) can be set to achieve the desired rise and fall times. The GPIO acts
as an input if the corresponding bit in the GPIODIR register is cleared. If open drain is selected while
the GPIO is configured as an input, the GPIO will remain an input and the open-drain selection has
no effect until the GPIO is changed to an output.
When using the I2C module, in addition to configuring the pin to open drain, the GPIO Alternate
Function Select (GPIOAFSEL) register bits for the I2C clock and data pins should be set (see
examples in “Initialization and Configuration” on page 404).
GPIO Open Drain Select (GPIOODR)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x50C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
ODE
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
ODE
R/W
0x00
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Output Pad Open Drain Enable
Value Description
1
The corresponding pin is configured as open drain.
0
The corresponding pin is not configured as open drain.
July 25, 2011
423
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 15: GPIO Pull-Up Select (GPIOPUR), offset 0x510
The GPIOPUR register is the pull-up control register. When a bit is set, a weak pull-up resistor on
the corresponding GPIO signal is enabled. Setting a bit in GPIOPUR automatically clears the
corresponding bit in the GPIO Pull-Down Select (GPIOPDR) register (see page 426). Write access
to this register is protected with the GPIOCR register. Bits in GPIOCR that are cleared prevent writes
to the equivalent bit in this register.
Important: All GPIO pins are configured as GPIOs and tri-stated by default (GPIOAFSEL=0,
GPIODEN=0, GPIOPDR=0, GPIOPUR=0, and GPIOPCTL=0, with the exception of the
pins shown in the table below. A Power-On-Reset (POR) or asserting RST puts the pins
back to their default state.
Table 9-9. GPIO Pins With Non-Zero Reset Values
Note:
GPIO Pins
Default State
PA[1:0]
UART0
GPIOAFSEL GPIODEN GPIOPDR GPIOPUR
0
1
0
GPIOPCTL
0
0x1
PA[5:2]
SSI0
0
1
0
0
0x1
PB[3:2]
I2C0
0
1
0
0
0x3
PC[3:0]
JTAG/SWD
1
1
0
1
0x1
The GPIO commit control registers provide a layer of protection against accidental
programming of critical hardware peripherals. Protection is provided for the NMI pin (PB7)
and the four JTAG/SWD pins (PC[3:0]). Writes to protected bits of the GPIO Alternate
Function Select (GPIOAFSEL) register (see page 418), GPIO Pull Up Select (GPIOPUR)
register (see page 424), GPIO Pull-Down Select (GPIOPDR) register (see page 426), and
GPIO Digital Enable (GPIODEN) register (see page 429) are not committed to storage
unless the GPIO Lock (GPIOLOCK) register (see page 431) has been unlocked and the
appropriate bits of the GPIO Commit (GPIOCR) register (see page 432) have been set.
GPIO Pull-Up Select (GPIOPUR)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x510
Type R/W, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
R/W
-
R/W
-
R/W
-
R/W
-
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
PUE
RO
0
RO
0
RO
0
R/W
-
R/W
-
R/W
-
424
R/W
-
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PUE
R/W
-
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Pad Weak Pull-Up Enable
Value Description
1
The corresponding pin has a weak pull-up resistor.
0
The corresponding pin is not affected.
Setting a bit in the GPIOPDR register clears the corresponding bit in
the GPIOPUR register. The change is effective on the second clock
cycle after the write if accessing GPIO via the APB memory aperture.
If using AHB access, the change is effective on the next clock cycle.
The reset value for this register is 0x0000.0000 for GPIO ports that are
not listed in Table 9-1 on page 396.
July 25, 2011
425
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 16: GPIO Pull-Down Select (GPIOPDR), offset 0x514
The GPIOPDR register is the pull-down control register. When a bit is set, a weak pull-down resistor
on the corresponding GPIO signal is enabled. Setting a bit in GPIOPDR automatically clears the
corresponding bit in the GPIO Pull-Up Select (GPIOPUR) register (see page 424).
Important: All GPIO pins are configured as GPIOs and tri-stated by default (GPIOAFSEL=0,
GPIODEN=0, GPIOPDR=0, GPIOPUR=0, and GPIOPCTL=0, with the exception of the
pins shown in the table below. A Power-On-Reset (POR) or asserting RST puts the pins
back to their default state.
Table 9-10. GPIO Pins With Non-Zero Reset Values
Note:
GPIO Pins
Default State
PA[1:0]
UART0
GPIOAFSEL GPIODEN GPIOPDR GPIOPUR
0
1
0
GPIOPCTL
0
0x1
PA[5:2]
SSI0
0
1
0
0
0x1
PB[3:2]
I2C0
0
1
0
0
0x3
PC[3:0]
JTAG/SWD
1
1
0
1
0x1
The GPIO commit control registers provide a layer of protection against accidental
programming of critical hardware peripherals. Protection is provided for the NMI pin (PB7)
and the four JTAG/SWD pins (PC[3:0]). Writes to protected bits of the GPIO Alternate
Function Select (GPIOAFSEL) register (see page 418), GPIO Pull Up Select (GPIOPUR)
register (see page 424), GPIO Pull-Down Select (GPIOPDR) register (see page 426), and
GPIO Digital Enable (GPIODEN) register (see page 429) are not committed to storage
unless the GPIO Lock (GPIOLOCK) register (see page 431) has been unlocked and the
appropriate bits of the GPIO Commit (GPIOCR) register (see page 432) have been set.
GPIO Pull-Down Select (GPIOPDR)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x514
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
PDE
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
426
R/W
0
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PDE
R/W
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Pad Weak Pull-Down Enable
Value Description
1
The corresponding pin has a weak pull-down resistor.
0
The corresponding pin is not affected.
Setting a bit in the GPIOPUR register clears the corresponding bit in
the GPIOPDR register. The change is effective on the second clock
cycle after the write if accessing GPIO via the APB memory aperture.
If using AHB access, the change is effective on the next clock cycle.
July 25, 2011
427
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 17: GPIO Slew Rate Control Select (GPIOSLR), offset 0x518
The GPIOSLR register is the slew rate control register. Slew rate control is only available when
using the 8-mA drive strength option via the GPIO 8-mA Drive Select (GPIODR8R) register (see
page 422).
GPIO Slew Rate Control Select (GPIOSLR)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x518
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
SRL
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
SRL
R/W
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Slew Rate Limit Enable (8-mA drive only)
Value Description
1
Slew rate control is enabled for the corresponding pin.
0
Slew rate control is disabled for the corresponding pin.
428
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 18: GPIO Digital Enable (GPIODEN), offset 0x51C
Note:
Pins configured as digital inputs are Schmitt-triggered.
The GPIODEN register is the digital enable register. By default, all GPIO signals except those listed
below are configured out of reset to be undriven (tristate). Their digital function is disabled; they do
not drive a logic value on the pin and they do not allow the pin voltage into the GPIO receiver. To
use the pin as a digital input or output (either GPIO or alternate function), the corresponding GPIODEN
bit must be set.
Important: All GPIO pins are configured as GPIOs and tri-stated by default (GPIOAFSEL=0,
GPIODEN=0, GPIOPDR=0, GPIOPUR=0, and GPIOPCTL=0, with the exception of the
pins shown in the table below. A Power-On-Reset (POR) or asserting RST puts the pins
back to their default state.
Table 9-11. GPIO Pins With Non-Zero Reset Values
Note:
GPIO Pins
Default State
GPIOAFSEL GPIODEN GPIOPDR GPIOPUR
GPIOPCTL
PA[1:0]
UART0
0
1
0
0
0x1
PA[5:2]
SSI0
0
1
0
0
0x1
PB[3:2]
I2C0
0
1
0
0
0x3
PC[3:0]
JTAG/SWD
1
1
0
1
0x1
The GPIO commit control registers provide a layer of protection against accidental
programming of critical hardware peripherals. Protection is provided for the NMI pin (PB7)
and the four JTAG/SWD pins (PC[3:0]). Writes to protected bits of the GPIO Alternate
Function Select (GPIOAFSEL) register (see page 418), GPIO Pull Up Select (GPIOPUR)
register (see page 424), GPIO Pull-Down Select (GPIOPDR) register (see page 426), and
GPIO Digital Enable (GPIODEN) register (see page 429) are not committed to storage
unless the GPIO Lock (GPIOLOCK) register (see page 431) has been unlocked and the
appropriate bits of the GPIO Commit (GPIOCR) register (see page 432) have been set.
July 25, 2011
429
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
GPIO Digital Enable (GPIODEN)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x51C
Type R/W, reset 31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
reserved
Type
Reset
reserved
Type
Reset
DEN
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
DEN
R/W
-
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Digital Enable
Value Description
0
The digital functions for the corresponding pin are disabled.
1
The digital functions for the corresponding pin are enabled.
The reset value for this register is 0x0000.0000 for GPIO ports
that are not listed in Table 9-1 on page 396.
430
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 19: GPIO Lock (GPIOLOCK), offset 0x520
The GPIOLOCK register enables write access to the GPIOCR register (see page 432). Writing
0x4C4F.434B to the GPIOLOCK register unlocks the GPIOCR register. Writing any other value to
the GPIOLOCK register re-enables the locked state. Reading the GPIOLOCK register returns the
lock status rather than the 32-bit value that was previously written. Therefore, when write accesses
are disabled, or locked, reading the GPIOLOCK register returns 0x0000.0001. When write accesses
are enabled, or unlocked, reading the GPIOLOCK register returns 0x0000.0000.
GPIO Lock (GPIOLOCK)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x520
Type R/W, reset 0x0000.0001
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
1
LOCK
Type
Reset
LOCK
Type
Reset
Bit/Field
Name
Type
31:0
LOCK
R/W
Reset
Description
0x0000.0001 GPIO Lock
A write of the value 0x4C4F.434B unlocks the GPIO Commit (GPIOCR)
register for write access.A write of any other value or a write to the
GPIOCR register reapplies the lock, preventing any register updates.
A read of this register returns the following values:
Value Description
0x1
The GPIOCR register is locked and may not be modified.
0x0
The GPIOCR register is unlocked and may be modified.
July 25, 2011
431
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 20: GPIO Commit (GPIOCR), offset 0x524
The GPIOCR register is the commit register. The value of the GPIOCR register determines which
bits of the GPIOAFSEL, GPIOPUR, GPIOPDR, and GPIODEN registers are committed when a
write to these registers is performed. If a bit in the GPIOCR register is cleared, the data being written
to the corresponding bit in the GPIOAFSEL, GPIOPUR, GPIOPDR, or GPIODEN registers cannot
be committed and retains its previous value. If a bit in the GPIOCR register is set, the data being
written to the corresponding bit of the GPIOAFSEL, GPIOPUR, GPIOPDR, or GPIODEN registers
is committed to the register and reflects the new value.
The contents of the GPIOCR register can only be modified if the status in the GPIOLOCK register
is unlocked. Writes to the GPIOCR register are ignored if the status in the GPIOLOCK register is
locked.
Important: This register is designed to prevent accidental programming of the registers that control
connectivity to the NMI and JTAG/SWD debug hardware. By initializing the bits of the
GPIOCR register to 0 for PB7 and PC[3:0], the NMI and JTAG/SWD debug port can
only be converted to GPIOs through a deliberate set of writes to the GPIOLOCK,
GPIOCR, and the corresponding registers.
Because this protection is currently only implemented on the NMI and JTAG/SWD pins
on PB7 and PC[3:0], all of the other bits in the GPIOCR registers cannot be written
with 0x0. These bits are hardwired to 0x1, ensuring that it is always possible to commit
new values to the GPIOAFSEL, GPIOPUR, GPIOPDR, or GPIODEN register bits of
these other pins.
GPIO Commit (GPIOCR)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x524
Type -, reset 31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
-
-
-
-
-
-
-
-
reserved
Type
Reset
reserved
Type
Reset
CR
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
432
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
7:0
CR
-
-
Description
GPIO Commit
Value Description
1
The corresponding GPIOAFSEL, GPIOPUR, GPIOPDR, or
GPIODEN bits can be written.
0
The corresponding GPIOAFSEL, GPIOPUR, GPIOPDR, or
GPIODEN bits cannot be written.
Note:
The default register type for the GPIOCR register is RO for
all GPIO pins with the exception of the NMI pin and the four
JTAG/SWD pins (PB7 and PC[3:0]). These five pins are the
only GPIOs that are protected by the GPIOCR register.
Because of this, the register type for GPIO Port B7 and GPIO
Port C[3:0] is R/W.
The default reset value for the GPIOCR register is
0x0000.00FF for all GPIO pins, with the exception of the NMI
pin and the four JTAG/SWD pins (PB7 and PC[3:0]). To
ensure that the JTAG port is not accidentally programmed as
GPIO pins, the PC[3:0] pins default to non-committable.
Similarly, to ensure that the NMI pin is not accidentally
programmed as a GPIO pin, the PB7 pin defaults to
non-committable. Because of this, the default reset value of
GPIOCR for GPIO Port B is 0x0000.007F while the default
reset value of GPIOCR for Port C is 0x0000.00F0.
July 25, 2011
433
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 21: GPIO Analog Mode Select (GPIOAMSEL), offset 0x528
Important: This register is only valid for ports D and E; the corresponding base addresses for the
remaining ports are not valid.
If any pin is to be used as an ADC input, the appropriate bit in GPIOAMSEL must be
set to disable the analog isolation circuit.
The GPIOAMSEL register controls isolation circuits to the analog side of a unified I/O pad. Because
the GPIOs may be driven by a 5-V source and affect analog operation, analog circuitry requires
isolation from the pins when they are not used in their analog function.
Each bit of this register controls the isolation circuitry for the corresponding GPIO signal. For
information on which GPIO pins can be used for ADC functions, refer to Table 17-5 on page 757.
GPIO Analog Mode Select (GPIOAMSEL)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x528
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
GPIOAMSEL
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
GPIOAMSEL
R/W
0x00
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Analog Mode Select
Value Description
1
The analog function of the pin is enabled, the isolation is
disabled, and the pin is capable of analog functions.
0
The analog function of the pin is disabled, the isolation is
enabled, and the pin is capable of digital functions as specified
by the other GPIO configuration registers.
Note:
This register and bits are only valid for GPIO signals that
share analog function through a unified I/O pad.
The reset state of this register is 0 for all signals.
434
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 22: GPIO Port Control (GPIOPCTL), offset 0x52C
The GPIOPCTL register is used in conjunction with the GPIOAFSEL register and selects the specific
peripheral signal for each GPIO pin when using the alternate function mode. Most bits in the
GPIOAFSEL register are cleared on reset, therefore most GPIO pins are configured as GPIOs by
default. When a bit is set in the GPIOAFSEL register, the corresponding GPIO signal is controlled
by an associated peripheral. The GPIOPCTL register selects one out of a set of peripheral functions
for each GPIO, providing additional flexibility in signal definition. For information on the defined
encodings for the bit fields in this register, refer to Table 17-5 on page 757. The reset value for this
register is 0x0000.0000 for GPIO ports that are not listed in the table below.
Important: All GPIO pins are configured as GPIOs and tri-stated by default (GPIOAFSEL=0,
GPIODEN=0, GPIOPDR=0, GPIOPUR=0, and GPIOPCTL=0, with the exception of the
pins shown in the table below. A Power-On-Reset (POR) or asserting RST puts the pins
back to their default state.
Table 9-12. GPIO Pins With Non-Zero Reset Values
GPIO Pins
Default State
PA[1:0]
UART0
GPIOAFSEL GPIODEN GPIOPDR GPIOPUR
0
1
0
GPIOPCTL
0
0x1
PA[5:2]
SSI0
0
1
0
0
0x1
PB[3:2]
I2C0
0
1
0
0
0x3
PC[3:0]
JTAG/SWD
1
1
0
1
0x1
GPIO Port Control (GPIOPCTL)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0x52C
Type R/W, reset 31
30
29
28
27
26
PMC7
Type
Reset
R/W
-
R/W
-
15
14
R/W
-
R/W
-
R/W
-
R/W
-
13
12
11
10
PMC3
Type
Reset
R/W
-
R/W
-
25
24
23
22
PMC6
R/W
-
R/W
-
R/W
-
R/W
-
9
8
7
6
PMC2
R/W
-
R/W
-
R/W
-
R/W
-
21
20
19
18
PMC5
R/W
-
R/W
-
R/W
-
R/W
-
5
4
3
2
PMC1
R/W
-
Bit/Field
Name
Type
Reset
31:28
PMC7
R/W
-
R/W
-
R/W
-
R/W
-
17
16
R/W
-
R/W
-
1
0
R/W
-
R/W
-
PMC4
PMC0
R/W
-
R/W
-
R/W
-
R/W
-
Description
Port Mux Control 7
This field controls the configuration for GPIO pin 7.
July 25, 2011
435
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Bit/Field
Name
Type
Reset
27:24
PMC6
R/W
-
Description
Port Mux Control 6
This field controls the configuration for GPIO pin 6.
23:20
PMC5
R/W
-
Port Mux Control 5
This field controls the configuration for GPIO pin 5.
19:16
PMC4
R/W
-
Port Mux Control 4
This field controls the configuration for GPIO pin 4.
15:12
PMC3
R/W
-
Port Mux Control 3
This field controls the configuration for GPIO pin 3.
11:8
PMC2
R/W
-
Port Mux Control 2
This field controls the configuration for GPIO pin 2.
7:4
PMC1
R/W
-
Port Mux Control 1
This field controls the configuration for GPIO pin 1.
3:0
PMC0
R/W
-
Port Mux Control 0
This field controls the configuration for GPIO pin 0.
436
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 23: GPIO Peripheral Identification 4 (GPIOPeriphID4), offset 0xFD0
The GPIOPeriphID4, GPIOPeriphID5, GPIOPeriphID6, and GPIOPeriphID7 registers can
conceptually be treated as one 32-bit register; each register contains eight bits of the 32-bit register,
used by software to identify the peripheral.
GPIO Peripheral Identification 4 (GPIOPeriphID4)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFD0
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID4
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID4
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Peripheral ID Register [7:0]
July 25, 2011
437
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 24: GPIO Peripheral Identification 5 (GPIOPeriphID5), offset 0xFD4
The GPIOPeriphID4, GPIOPeriphID5, GPIOPeriphID6, and GPIOPeriphID7 registers can
conceptually be treated as one 32-bit register; each register contains eight bits of the 32-bit register,
used by software to identify the peripheral.
GPIO Peripheral Identification 5 (GPIOPeriphID5)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFD4
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID5
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID5
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Peripheral ID Register [15:8]
438
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 25: GPIO Peripheral Identification 6 (GPIOPeriphID6), offset 0xFD8
The GPIOPeriphID4, GPIOPeriphID5, GPIOPeriphID6, and GPIOPeriphID7 registers can
conceptually be treated as one 32-bit register; each register contains eight bits of the 32-bit register,
used by software to identify the peripheral.
GPIO Peripheral Identification 6 (GPIOPeriphID6)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFD8
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID6
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID6
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Peripheral ID Register [23:16]
July 25, 2011
439
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 26: GPIO Peripheral Identification 7 (GPIOPeriphID7), offset 0xFDC
The GPIOPeriphID4, GPIOPeriphID5, GPIOPeriphID6, and GPIOPeriphID7 registers can
conceptually be treated as one 32-bit register; each register contains eight bits of the 32-bit register,
used by software to identify the peripheral.
GPIO Peripheral Identification 7 (GPIOPeriphID7)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFDC
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID7
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID7
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Peripheral ID Register [31:24]
440
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 27: GPIO Peripheral Identification 0 (GPIOPeriphID0), offset 0xFE0
The GPIOPeriphID0, GPIOPeriphID1, GPIOPeriphID2, and GPIOPeriphID3 registers can
conceptually be treated as one 32-bit register; each register contains eight bits of the 32-bit register,
used by software to identify the peripheral.
GPIO Peripheral Identification 0 (GPIOPeriphID0)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFE0
Type RO, reset 0x0000.0061
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
1
RO
1
RO
0
RO
0
RO
0
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
PID0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID0
RO
0x61
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Peripheral ID Register [7:0]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
441
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 28: GPIO Peripheral Identification 1 (GPIOPeriphID1), offset 0xFE4
The GPIOPeriphID0, GPIOPeriphID1, GPIOPeriphID2, and GPIOPeriphID3 registers can
conceptually be treated as one 32-bit register; each register contains eight bits of the 32-bit register,
used by software to identify the peripheral.
GPIO Peripheral Identification 1 (GPIOPeriphID1)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFE4
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID1
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID1
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Peripheral ID Register [15:8]
Can be used by software to identify the presence of this peripheral.
442
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 29: GPIO Peripheral Identification 2 (GPIOPeriphID2), offset 0xFE8
The GPIOPeriphID0, GPIOPeriphID1, GPIOPeriphID2, and GPIOPeriphID3 registers can
conceptually be treated as one 32-bit register; each register contains eight bits of the 32-bit register,
used by software to identify the peripheral.
GPIO Peripheral Identification 2 (GPIOPeriphID2)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFE8
Type RO, reset 0x0000.0018
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID2
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID2
RO
0x18
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Peripheral ID Register [23:16]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
443
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 30: GPIO Peripheral Identification 3 (GPIOPeriphID3), offset 0xFEC
The GPIOPeriphID0, GPIOPeriphID1, GPIOPeriphID2, and GPIOPeriphID3 registers can
conceptually be treated as one 32-bit register; each register contains eight bits of the 32-bit register,
used by software to identify the peripheral.
GPIO Peripheral Identification 3 (GPIOPeriphID3)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFEC
Type RO, reset 0x0000.0001
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
PID3
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID3
RO
0x01
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO Peripheral ID Register [31:24]
Can be used by software to identify the presence of this peripheral.
444
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 31: GPIO PrimeCell Identification 0 (GPIOPCellID0), offset 0xFF0
The GPIOPCellID0, GPIOPCellID1, GPIOPCellID2, and GPIOPCellID3 registers are four 8-bit wide
registers, that can conceptually be treated as one 32-bit register. The register is used as a standard
cross-peripheral identification system.
GPIO PrimeCell Identification 0 (GPIOPCellID0)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFF0
Type RO, reset 0x0000.000D
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID0
RO
0x0D
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO PrimeCell ID Register [7:0]
Provides software a standard cross-peripheral identification system.
July 25, 2011
445
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 32: GPIO PrimeCell Identification 1 (GPIOPCellID1), offset 0xFF4
The GPIOPCellID0, GPIOPCellID1, GPIOPCellID2, and GPIOPCellID3 registers are four 8-bit wide
registers, that can conceptually be treated as one 32-bit register. The register is used as a standard
cross-peripheral identification system.
GPIO PrimeCell Identification 1 (GPIOPCellID1)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFF4
Type RO, reset 0x0000.00F0
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
1
RO
1
RO
1
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
CID1
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID1
RO
0xF0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO PrimeCell ID Register [15:8]
Provides software a standard cross-peripheral identification system.
446
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 33: GPIO PrimeCell Identification 2 (GPIOPCellID2), offset 0xFF8
The GPIOPCellID0, GPIOPCellID1, GPIOPCellID2, and GPIOPCellID3 registers are four 8-bit wide
registers, that can conceptually be treated as one 32-bit register. The register is used as a standard
cross-peripheral identification system.
GPIO PrimeCell Identification 2 (GPIOPCellID2)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFF8
Type RO, reset 0x0000.0005
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID2
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID2
RO
0x05
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO PrimeCell ID Register [23:16]
Provides software a standard cross-peripheral identification system.
July 25, 2011
447
Texas Instruments-Production Data
General-Purpose Input/Outputs (GPIOs)
Register 34: GPIO PrimeCell Identification 3 (GPIOPCellID3), offset 0xFFC
The GPIOPCellID0, GPIOPCellID1, GPIOPCellID2, and GPIOPCellID3 registers are four 8-bit wide
registers, that can conceptually be treated as one 32-bit register. The register is used as a standard
cross-peripheral identification system.
GPIO PrimeCell Identification 3 (GPIOPCellID3)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
Offset 0xFFC
Type RO, reset 0x0000.00B1
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
0
RO
1
RO
1
RO
0
RO
0
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID3
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID3
RO
0xB1
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPIO PrimeCell ID Register [31:24]
Provides software a standard cross-peripheral identification system.
448
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
10
General-Purpose Timers
Programmable timers can be used to count or time external events that drive the Timer input pins.
®
The Stellaris General-Purpose Timer Module (GPTM) contains four GPTM blocks. Each GPTM
block provides two 16-bit timers/counters (referred to as Timer A and Timer B) that can be configured
to operate independently as timers or event counters, or concatenated to operate as one 32-bit
timer or one 32-bit Real-Time Clock (RTC). Timers can also be used to trigger μDMA transfers.
In addition, timers can be used to trigger analog-to-digital conversions (ADC). The ADC trigger
signals from all of the general-purpose timers are ORed together before reaching the ADC module,
so only one timer should be used to trigger ADC events.
The GPT Module is one timing resource available on the Stellaris microcontrollers. Other timer
resources include the System Timer (SysTick) (see 90).
The General-Purpose Timer Module (GPTM) contains four GPTM blocks with the following functional
options:
■ Operating modes:
– 16- or 32-bit programmable one-shot timer
– 16- or 32-bit programmable periodic timer
– 16-bit general-purpose timer with an 8-bit prescaler
– 32-bit Real-Time Clock (RTC) when using an external 32.768-KHz clock as the input
– 16-bit input-edge count- or time-capture modes
– 16-bit PWM mode with software-programmable output inversion of the PWM signal
■ Count up or down
■ Daisy chaining of timer modules to allow a single timer to initiate multiple timing events
■ ADC event trigger
■ User-enabled stalling when the microcontroller asserts CPU Halt flag during debug (excluding
RTC mode)
■ Ability to determine the elapsed time between the assertion of the timer interrupt and entry into
the interrupt service routine.
■ Efficient transfers using Micro Direct Memory Access Controller (µDMA)
– Dedicated channel for each timer
– Burst request generated on timer interrupt
10.1
Block Diagram
In the block diagram, the specific Capture Compare PWM (CCP) pins available depend on the
Stellaris device. See Table 10-1 on page 450 for the available CCP pins and their timer assignments.
July 25, 2011
449
Texas Instruments-Production Data
General-Purpose Timers
Figure 10-1. GPTM Module Block Diagram
0x0000 (Down Counter Modes)
0xFFFF (Up Counter Modes)
Timer A
Free-Running
Value
Timer A Control
GPTMTAPMR
GPTMTAPR
TA Comparator
GPTMTAMATCHR
Clock / Edge
Detect
GPTMTAILR
Interrupt / Config
Timer A
Interrupt
GPTMTAMR
GPTMTAR En
GPTMCTL
GPTMTAV
GPTMIMR
Timer B
Interrupt
32 KHz or
Even CCP Pin
GPTMCFG
RTC Divider
GPTMRIS
GPTMTBV
GPTMMIS
GPTMICR
GPTMTBR En
Clock / Edge
Detect
Timer B Control
GPTMTBMR
GPTMTBILR
Timer B
Free-Running
Value
Odd CCP Pin
TB Comparator
GPTMTBMATCHR
GPTMTBPR
GPTMTBPMR
0x0000 (Down Counter Modes)
0xFFFF (Up Counter Modes)
System
Clock
Table 10-1. Available CCP Pins
Timer
Timer 0
Timer 1
10.2
16-Bit Up/Down Counter
Even CCP Pin
Odd CCP Pin
TimerA
CCP0
-
TimerB
-
CCP1
TimerA
CCP2
-
TimerB
-
CCP3
Timer 2
TimerA
CCP4
-
TimerB
-
CCP5
Timer 3
TimerA
CCP6
-
TimerB
-
CCP7
Signal Description
The following table lists the external signals of the GP Timer module and describes the function of
each. The GP Timer signals are alternate functions for some GPIO signals and default to be GPIO
signals at reset. The column in the table below titled "Pin Mux/Pin Assignment" lists the possible
GPIO pin placements for these GP Timer signals. The AFSEL bit in the GPIO Alternate Function
Select (GPIOAFSEL) register (page 418) should be set to choose the GP Timer function. The number
in parentheses is the encoding that must be programmed into the PMCn field in the GPIO Port
Control (GPIOPCTL) register (page 435) to assign the GP Timer signal to the specified GPIO port
pin. For more information on configuring GPIOs, see “General-Purpose Input/Outputs
(GPIOs)” on page 395.
450
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 10-2. Signals for General-Purpose Timers (100LQFP)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
CCP0
13
22
23
58
66
70
91
95
PD3 (4)
PC7 (4)
PC6 (6)
PF4 (1)
PB0 (1)
PB2 (5)
PB5 (4)
PD4 (1)
I/O
TTL
Capture/Compare/PWM 0.
CCP1
24
25
34
43
67
75
90
100
PC5 (1)
PC4 (9)
PA6 (2)
PF6 (1)
PB1 (4)
PE3 (1)
PB6 (1)
PD7 (3)
I/O
TTL
Capture/Compare/PWM 1.
CCP2
6
11
25
46
67
73
74
91
96
PE4 (6)
PD1 (10)
PC4 (5)
PF5 (1)
PB1 (1)
PE1 (4)
PE2 (5)
PB5 (6)
PD5 (1)
I/O
TTL
Capture/Compare/PWM 2.
CCP3
6
23
24
35
41
61
70
72
95
PE4 (1)
PC6 (1)
PC5 (5)
PA7 (7)
PG4 (1)
PF1 (10)
PB2 (4)
PE0 (3)
PD4 (2)
I/O
TTL
Capture/Compare/PWM 3.
CCP4
22
25
35
42
74
96
PC7 (1)
PC4 (6)
PA7 (2)
PF7 (1)
PE2 (1)
PD5 (2)
I/O
TTL
Capture/Compare/PWM 4.
CCP5
5
12
25
36
40
90
91
PE5 (1)
PD2 (4)
PC4 (1)
PG7 (8)
PG5 (1)
PB6 (6)
PB5 (2)
I/O
TTL
Capture/Compare/PWM 5.
CCP6
10
12
73
86
91
PD0 (6)
PD2 (2)
PE1 (5)
PH0 (1)
PB5 (3)
I/O
TTL
Capture/Compare/PWM 6.
July 25, 2011
451
Texas Instruments-Production Data
General-Purpose Timers
Table 10-2. Signals for General-Purpose Timers (100LQFP) (continued)
Pin Name
CCP7
Pin Number Pin Mux / Pin
Assignment
11
13
75
85
90
PD1 (6)
PD3 (2)
PE3 (5)
PH1 (1)
PB6 (2)
a
Pin Type
Buffer Type
I/O
TTL
Description
Capture/Compare/PWM 7.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 10-3. Signals for General-Purpose Timers (108BGA)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
CCP0
H1
L2
M2
L9
E12
C11
B7
A4
PD3 (4)
PC7 (4)
PC6 (6)
PF4 (1)
PB0 (1)
PB2 (5)
PB5 (4)
PD4 (1)
I/O
TTL
Capture/Compare/PWM 0.
CCP1
M1
L1
L6
M8
D12
A12
A7
A2
PC5 (1)
PC4 (9)
PA6 (2)
PF6 (1)
PB1 (4)
PE3 (1)
PB6 (1)
PD7 (3)
I/O
TTL
Capture/Compare/PWM 1.
CCP2
B2
G2
L1
L8
D12
B12
B11
B7
B4
PE4 (6)
PD1 (10)
PC4 (5)
PF5 (1)
PB1 (1)
PE1 (4)
PE2 (5)
PB5 (6)
PD5 (1)
I/O
TTL
Capture/Compare/PWM 2.
CCP3
B2
M2
M1
M6
K3
H12
C11
A11
A4
PE4 (1)
PC6 (1)
PC5 (5)
PA7 (7)
PG4 (1)
PF1 (10)
PB2 (4)
PE0 (3)
PD4 (2)
I/O
TTL
Capture/Compare/PWM 3.
CCP4
L2
L1
M6
K4
B11
B4
PC7 (1)
PC4 (6)
PA7 (2)
PF7 (1)
PE2 (1)
PD5 (2)
I/O
TTL
Capture/Compare/PWM 4.
452
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 10-3. Signals for General-Purpose Timers (108BGA) (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
CCP5
B3
H2
L1
C10
M7
A7
B7
PE5 (1)
PD2 (4)
PC4 (1)
PG7 (8)
PG5 (1)
PB6 (6)
PB5 (2)
I/O
TTL
Capture/Compare/PWM 5.
CCP6
G1
H2
B12
C9
B7
PD0 (6)
PD2 (2)
PE1 (5)
PH0 (1)
PB5 (3)
I/O
TTL
Capture/Compare/PWM 6.
CCP7
G2
H1
A12
C8
A7
PD1 (6)
PD3 (2)
PE3 (5)
PH1 (1)
PB6 (2)
I/O
TTL
Capture/Compare/PWM 7.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
10.3
Functional Description
The main components of each GPTM block are two free-running up/down counters (referred to as
Timer A and Timer B), two match registers, two prescaler match registers, two shadow registers,
and two load/initialization registers and their associated control functions. The exact functionality of
each GPTM is controlled by software and configured through the register interface. Timer A and
Timer B can be used individually, in which case they have a 16-bit counting range. In addition, Timer
A and Timer B can be concatenated to provide a 32-bit counting range. Note that the prescaler can
only be used when the timers are used individually.
The available modes for each GPTM block are shown in Table 10-4 on page 453. Note that when
counting down, the prescaler acts as a true prescaler and contains the least-significant bits of the
count. When counting up, the prescaler acts as a timer extension and holds the most-significant
bits of the count.
Table 10-4. General-Purpose Timer Capabilities
Mode
a
Timer Use
Count Direction
Counter Size
Prescaler Size
Individual
Up or Down
16-bit
8-bit
Concatenated
Up or Down
32-bit
-
Individual
Up or Down
16-bit
8-bit
Concatenated
Up or Down
32-bit
-
RTC
Concatenated
Up
32-bit
-
Edge Count
Individual
Down
16-bit
8-bit
Edge Time
Individual
Down
16-bit
-
PWM
Individual
Down
16-bit
-
One-shot
Periodic
a. The prescaler is only available when the timers are used individually
Software configures the GPTM using the GPTM Configuration (GPTMCFG) register (see page 465),
the GPTM Timer A Mode (GPTMTAMR) register (see page 466), and the GPTM Timer B Mode
(GPTMTBMR) register (see page 468). When in one of the concatentated modes, Timer A and Timer
July 25, 2011
453
Texas Instruments-Production Data
General-Purpose Timers
B can only operate in one mode. However, when configured in an individual mode, Timer A and
Timer B can be independently configured in any combination of the individual modes.
10.3.1
GPTM Reset Conditions
After reset has been applied to the GPTM module, the module is in an inactive state, and all control
registers are cleared and in their default states. Counters Timer A and Timer B are initialized to all
1s, along with their corresponding load registers: the GPTM Timer A Interval Load (GPTMTAILR)
register (see page 483) and the GPTM Timer B Interval Load (GPTMTBILR) register (see page 484)
and shadow registers: the GPTM Timer A Value (GPTMTAV) register (see page 493) and the GPTM
Timer B Value (GPTMTBV) register (see page 494). The prescale counters are initialized to 0x00:
the GPTM Timer A Prescale (GPTMTAPR) register (see page 487) and the GPTM Timer B Prescale
(GPTMTBPR) register (see page 488).
10.3.2
Timer Modes
This section describes the operation of the various timer modes. When using Timer A and Timer B
in concatenated mode, only the Timer A control and status bits must be used; there is no need to
use Timer B control and status bits. The GPTM is placed into individual mode by writing a value of
0x4 to the GPTM Configuration (GPTMCFG) register (see page 465). In the following sections, the
variable "n" is used in bit field and register names to imply either a Timer A function or a Timer B
function. The prescaler is only available in the 16-bit one-shot, periodic, and input edge count timer
mode. Note that when counting down, the prescaler acts as a true prescaler and contains the
least-significant bits of the count. When counting up, the prescaler acts as a timer extension and
holds the most-significant bits of the count. Throughout this section, the timeout event in down-count
mode is 0x0 and in up-count mode is the value in the GPTM Timer n Match (GPTMTnMATCH)
and the optional GPTM Timer n Prescale Match (GPTMTnPMR) registers.
10.3.2.1
One-Shot/Periodic Timer Mode
The selection of one-shot or periodic mode is determined by the value written to the TnMR field of
the GPTM Timer n Mode (GPTMTnMR) register (see page 466). The timer is configured to count
up or down using the TnCDIR bit in the GPTMTnMR register.
When software sets the TnEN bit in the GPTM Control (GPTMCTL) register (see page 470), the
timer begins counting up from 0x0 or down from its preloaded value. Alternatively, if the TnWOT bit
is set in the GPTMTnMR register, once the TnEN bit is set, the timer waits for a trigger to begin
counting (see the section called “Wait-for-Trigger Mode” on page 455).
When the timer is counting down and it reaches the timeout event (0x0), the timer reloads its start
value from the GPTMTnILR and the GPTMTnPR registers on the next cycle. When the timer is
counting up and it reaches the timeout event (the value in the GPTMTnILR and the GPTMTnPR
registers), the timer reloads with 0x0. If configured to be a one-shot timer, the timer stops counting
and clears the TnEN bit in the GPTMCTL register. If configured as a periodic timer, the timer starts
counting again on the next cycle. In periodic, snap-shot mode (TnSNAPS bit in the GPTMTnMR
register is set), the actual free-running value of the timer at the time-out event is loaded into the
GPTMTnR register. In this manner, software can determine the time elapsed from the interrupt
assertion to the ISR entry.
In addition to reloading the count value, the GPTM generates interrupts and triggers when it reaches
the time-out event. The GPTM sets the TnTORIS bit in the GPTM Raw Interrupt Status (GPTMRIS)
register (see page 475), and holds it until it is cleared by writing the GPTM Interrupt Clear (GPTMICR)
register (see page 481). If the timeout interrupt is enabled in the GPTM Interrupt Mask (GPTMIMR)
register (see page 473), the GPTM also sets the TnTOMIS bit in the GPTM Masked Interrupt Status
(GPTMMIS) register (see page 478). By setting the TnMIE bit in the GPTMTAMR register, an interrupt
454
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
can also be generated when the Timer value equals the value loaded into the GPTM Timer n Match
(GPTMTnMATCH) and GPTM Timer n Prescale Match (GPTMTnPMR) registers. This interrupt
has the same status, masking, and clearing functions as the timeout interrupt. The ADC trigger is
enabled by setting the TnOTE bit in GPTMCTL. The μDMA trigger is enabled by configuring and
enabling the appropriate μDMA channel. See “Channel Configuration” on page 339.
If software updates the GPTMTnILR register while the counter is counting down, the counter loads
the new value on the next clock cycle and continues counting down from the new value. If software
updates the GPTMTnILR register while the counter is counting up, the timeout event is changed
on the next cycle to the new value. If software updates the GPTM Timer n Value (GPTMTnV)
register while the counter is counting up or down, the counter loads the new value on the next clock
cycle and continues counting from the new value. If software updates the GPTMTnMATCHR register
while the counter is counting, the counter loads the new value on the next clock cycle and continues
counting from the new value.
If the TnSTALL bit in the GPTMCTL register is set, the timer freezes counting while the processor
is halted by the debugger. The timer resumes counting when the processor resumes execution.
The following table shows a variety of configurations for a 16-bit free-running timer while using the
prescaler. All values assume an 80-MHz clock with Tc=12.5 ns (clock period).
Table 10-5. 16-Bit Timer With Prescaler Configurations
a
Prescale
#Clock (Tc)
Max Time
Units
00000000
1
0.8192
ms
00000001
2
1.6384
ms
00000010
3
2.4576
ms
------------
--
--
--
11111101
254
208.0768
ms
11111110
255
208.896
ms
11111111
256
209.7152
ms
a. Tc is the clock period.
Wait-for-Trigger Mode
The Wait-for-Trigger mode allows daisy chaining of the timer modules such that once configured,
a single timer can initiate mulitple timing events using the Timer triggers. Wait-for-Trigger mode is
enabled by setting the TnWOT bit in the GPTMTnMR register. When the TnWOT bit is set, Timer N+1
does not begin counting until the timer in the previous position in the daisy chain (Timer N) reaches
its time-out event. The daisy chain is configured such that GPTM1 always follows GPTM0, GPTM2
follows GPTM1, and so on. If Timer A is in 32-bit mode (controlled by the GPTMCFG bit in the
GPTMCFG register), it triggers Timer A in the next module. If Timer A is in 16-bit mode, it triggers
Timer B in the same module, and Timer B triggers Timer A in the next module. Care must be taken
that the TAWOT bit is never set in GPTM0. Figure 10-2 on page 456 shows how the GPTMCFG bit
affects the daisy chain. This function is valid for both one-shot and periodic modes.
July 25, 2011
455
Texas Instruments-Production Data
General-Purpose Timers
Figure 10-2. Timer Daisy Chain
GP Timer N+1
1
0
GPTMCFG
Timer B ADC Trigger
Timer B
Timer A
Timer A ADC Trigger
GP Timer N
1
0
GPTMCFG
Timer B ADC Trigger
Timer B
Timer A
10.3.2.2
Timer A ADC Trigger
Real-Time Clock Timer Mode
In Real-Time Clock (RTC) mode, the concatenated versions of the Timer A and Timer B registers
are configured as an up-counter. When RTC mode is selected for the first time after reset, the
counter is loaded with a value of 0x1. All subsequent load values must be written to the GPTM
Timer A Interval Load (GPTMTAILR) register (see page 483).
The input clock on a CCP input is required to be 32.768 KHz in RTC mode. The clock signal is then
divided down to a 1-Hz rate and is passed along to the input of the counter.
When software writes the TAEN bit in the GPTMCTL register, the counter starts counting up from
its preloaded value of 0x1. When the current count value matches the preloaded value in the
GPTMTAMATCHR register, the GPTM asserts the RTCRIS bit in GPTMRIS and continues counting
until either a hardware reset, or it is disabled by software (clearing the TAEN bit). When the timer
value reaches the terminal count, the timer rolls over and continues counting up from 0x0. If the
RTC interrupt is enabled in GPTMIMR, the GPTM also sets the RTCMIS bit in GPTMMIS and
generates a controller interrupt. The status flags are cleared by writing the RTCCINT bit in GPTMICR.
In addition to generating interrupts, a μDMA trigger can be generated. The μDMA trigger is enabled
by configuring and enabling the appropriate μDMA channel. See “Channel Configuration” on page 339.
If the TASTALL and/or TBSTALL bits in the GPTMCTL register are set, the timer does not freeze if
the RTCEN bit is set in GPTMCTL.
10.3.2.3
Input Edge-Count Mode
Note:
For rising-edge detection, the input signal must be High for at least two system clock periods
following the rising edge. Similarly, for falling-edge detection, the input signal must be Low
for at least two system clock periods following the falling edge. Based on this criteria, the
maximum input frequency for edge detection is 1/4 of the system frequency.
In Edge-Count mode, the timer is configured as a 24-bit down-counter including the optional prescaler
with the upper count value stored in the GPTM Timer n Prescale (GPTMTnPR) register and the
lower bits in the GPTMTnR register. In this mode, the timer is capable of capturing three types of
events: rising edge, falling edge, or both. To place the timer in Edge-Count mode, the TnCMR bit of
the GPTMTnMR register must be cleared. The type of edge that the timer counts is determined by
the TnEVENT fields of the GPTMCTL register. During initialization, the GPTMTnMATCHR and
GPTMTnPMR registers are configured so that the difference between the value in the GPTMTnILR
and GPTMTnPR registers and the GPTMTnMATCHR and GPTMTnPMR registers equals the
number of edge events that must be counted.
456
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
When software writes the TnEN bit in the GPTM Control (GPTMCTL) register, the timer is enabled
for event capture. Each input event on the CCP pin decrements the counter by 1 until the event
count matches GPTMTnMATCHR and GPTMTnPMR. When the counts match, the GPTM asserts
the CnMRIS bit in the GPTMRIS register (and the CnMMIS bit, if the interrupt is not masked).
In addition to generating interrupts, an ADC and/or a μDMA trigger can be generated. The ADC
trigger is enabled by setting the TnOTE bit in GPTMCTL.The μDMA trigger is enabled by configuring
and enabling the appropriate μDMA channel. See “Channel Configuration” on page 339.
After the match value is reached, the counter is then reloaded using the value in GPTMTnILR and
GPTMTnPR registers, and stopped because the GPTM automatically clears the TnEN bit in the
GPTMCTL register. Once the event count has been reached, all further events are ignored until
TnEN is re-enabled by software.
Figure 10-3 on page 457 shows how Input Edge-Count mode works. In this case, the timer start
value is set to GPTMTnILR =0x000A and the match value is set to GPTMTnMATCHR =0x0006 so
that four edge events are counted. The counter is configured to detect both edges of the input signal.
Note that the last two edges are not counted because the timer automatically clears the TnEN bit
after the current count matches the value in the GPTMTnMATCHR register.
Figure 10-3. Input Edge-Count Mode Example
Timer stops,
flags
asserted
Count
Timer reload
on next cycle
Ignored
Ignored
0x000A
0x0009
0x0008
0x0007
0x0006
Input Signal
10.3.2.4
Input Edge-Time Mode
Note:
For rising-edge detection, the input signal must be High for at least two system clock periods
following the rising edge. Similarly, for falling edge detection, the input signal must be Low
for at least two system clock periods following the falling edge. Based on this criteria, the
maximum input frequency for edge detection is 1/4 of the system frequency.
The prescaler is not available in 16-Bit Input Edge-Time mode.
In Edge-Time mode, the timer is configured as a 16-bit down-counter. In this mode, the timer is
initialized to the value loaded in the GPTMTnILRregister. The timer is capable of capturing three
types of events: rising edge, falling edge, or both. The timer is placed into Edge-Time mode by
July 25, 2011
457
Texas Instruments-Production Data
General-Purpose Timers
setting the TnCMR bit in the GPTMTnMR register, and the type of event that the timer captures is
determined by the TnEVENT fields of the GPTMCTL register.
When software writes the TnEN bit in the GPTMCTL register, the timer is enabled for event capture.
When the selected input event is detected, the current timer counter value is captured in the
GPTMTnR register and is available to be read by the microcontroller. The GPTM then asserts the
CnERIS bit (and the CnEMIS bit, if the interrupt is not masked). The GPTMTnV contains the
free-running value of the timer and can be read to determine the time that elapsed between the
interrupt assertion and the entry into the ISR.
In addition to generating interrupts, an ADC and/or a μDMA trigger can be generated. The ADC
trigger is enabled by setting the TnOTE bit in GPTMCTL.The μDMA trigger is enabled by configuring
and enabling the appropriate μDMA channel. See “Channel Configuration” on page 339.
After an event has been captured, the timer does not stop counting. It continues to count until the
TnEN bit is cleared. When the timer reaches the timeout value, it is reloaded with the value from the
GPTMTnILR register.
Figure 10-4 on page 458 shows how input edge timing mode works. In the diagram, it is assumed
that the start value of the timer is the default value of 0xFFFF, and the timer is configured to capture
rising edge events.
Each time a rising edge event is detected, the current count value is loaded into the GPTMTnR
register, and is held there until another rising edge is detected (at which point the new count value
is loaded into the GPTMTnR register).
Figure 10-4. 16-Bit Input Edge-Time Mode Example
Count
0xFFFF
GPTMTnR=X
GPTMTnR=Y
GPTMTnR=Z
Z
X
Y
Time
Input Signal
10.3.2.5
PWM Mode
Note:
The prescaler is not available in 16-Bit PWM mode.
The GPTM supports a simple PWM generation mode. In PWM mode, the timer is configured as a
16-bit down-counter with a start value (and thus period) defined by the GPTMTnILR register. In this
mode, the PWM frequency and period are synchronous events and therefore guaranteed to be
glitch free. PWM mode is enabled with the GPTMTnMR register by setting the TnAMS bit to 0x1,
the TnCMR bit to 0x0, and the TnMR field to 0x1 or 0x2.
458
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
When software writes the TnEN bit in the GPTMCTL register, the counter begins counting down
until it reaches the 0x0 state. On the next counter cycle in periodic mode, the counter reloads its
start value from the GPTMTnILR register and continues counting until disabled by software clearing
the TnEN bit in the GPTMCTL register. No interrupts or status bits are asserted in PWM mode.
The output PWM signal asserts when the counter is at the value of the GPTMTnILR register (its
start state), and is deasserted when the counter value equals the value in the GPTMTnMATCHR
register. Software has the capability of inverting the output PWM signal by setting the TnPWML bit
in the GPTMCTL register.
Figure 10-5 on page 459 shows how to generate an output PWM with a 1-ms period and a 66% duty
cycle assuming a 50-MHz input clock and TnPWML =0 (duty cycle would be 33% for the TnPWML
=1 configuration). For this example, the start value is GPTMTnILR=0xC350 and the match value is
GPTMTnMATCHR=0x411A.
Figure 10-5. 16-Bit PWM Mode Example
Count
GPTMTnR=GPTMnMR
GPTMTnR=GPTMnMR
0xC350
0x411A
Time
TnEN set
TnPWML = 0
Output
Signal
TnPWML = 1
10.3.3
DMA Operation
The timers each have a dedicated μDMA channel and can provide a request signal to the μDMA
controller. The request is a burst type and occurs whenever a timer raw interrupt condition occurs.
The arbitration size of the μDMA transfer should be set to the amount of data that should be
transferred whenever a timer event occurs.
For example, to transfer 256 items, 8 items at a time every 10 ms, configure a timer to generate a
periodic timeout at 10 ms. Configure the μDMA transfer for a total of 256 items, with a burst size of
8 items. Each time the timer times out, the μDMA controller transfers 8 items, until all 256 items
have been transferred.
No other special steps are needed to enable Timers for μDMA operation. Refer to “Micro Direct
Memory Access (μDMA)” on page 335 for more details about programming the μDMA controller.
July 25, 2011
459
Texas Instruments-Production Data
General-Purpose Timers
10.3.4
Accessing Concatenated Register Values
The GPTM is placed into concatenated mode by writing a 0x0 or a 0x1 to the GPTMCFG bit field in
the GPTM Configuration (GPTMCFG) register. In both configurations, certain registers are
concatenated to form pseudo 32-bit registers. These registers include:
■ GPTM Timer A Interval Load (GPTMTAILR) register [15:0], see page 483
■ GPTM Timer B Interval Load (GPTMTBILR) register [15:0], see page 484
■ GPTM Timer A (GPTMTAR) register [15:0], see page 491
■ GPTM Timer B (GPTMTBR) register [15:0], see page 492
■ GPTM Timer A Value (GPTMTAV) register [15:0], see page 493
■ GPTM Timer B Value (GPTMTBV) register [15:0], see page 494
■ GPTM Timer A Match (GPTMTAMATCHR) register [15:0], see page 485
■ GPTM Timer B Match (GPTMTBMATCHR) register [15:0], see page 486
In the 32-bit modes, the GPTM translates a 32-bit write access to GPTMTAILR into a write access
to both GPTMTAILR and GPTMTBILR. The resulting word ordering for such a write operation is:
GPTMTBILR[15:0]:GPTMTAILR[15:0]
Likewise, a 32-bit read access to GPTMTAR returns the value:
GPTMTBR[15:0]:GPTMTAR[15:0]
A 32-bit read access to GPTMTAV returns the value:
GPTMTBV[15:0]:GPTMTAV[15:0]
10.4
Initialization and Configuration
To use a GPTM, the appropriate TIMERn bit must be set in the RCGC1 register (see page 243). If
using any CCP pins, the clock to the appropriate GPIO module must be enabled via the RCGC1
register (see page 243). To find out which GPIO port to enable, refer to Table 17-4 on page 753.
Configure the PMCn fields in the GPIOPCTL register to assign the CCP signals to the appropriate
pins (see page 435 and Table 17-5 on page 757).
This section shows module initialization and configuration examples for each of the supported timer
modes.
10.4.1
One-Shot/Periodic Timer Mode
The GPTM is configured for One-Shot and Periodic modes by the following sequence:
1. Ensure the timer is disabled (the TnEN bit in the GPTMCTL register is cleared) before making
any changes.
2. Write the GPTM Configuration Register (GPTMCFG) with a value of 0x0000.0000.
3. Configure the TnMR field in the GPTM Timer n Mode Register (GPTMTnMR):
460
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
a. Write a value of 0x1 for One-Shot mode.
b. Write a value of 0x2 for Periodic mode.
4. Optionally configure the TnSNAPS, TnWOT, TnMTE, and TnCDIR bits in the GPTMTnMR register
to select whether to capture the value of the free-running timer at time-out, use an external
trigger to start counting, configure an additional trigger or interrupt, and count up or down.
5. Load the start value into the GPTM Timer n Interval Load Register (GPTMTnILR).
6. If interrupts are required, set the appropriate bits in the GPTM Interrupt Mask Register
(GPTMIMR).
7. Set the TnEN bit in the GPTMCTL register to enable the timer and start counting.
8. Poll the GPTMRIS register or wait for the interrupt to be generated (if enabled). In both cases,
the status flags are cleared by writing a 1 to the appropriate bit of the GPTM Interrupt Clear
Register (GPTMICR).
If the TnMIE bit in the GPTMTnMR register is set, the RTCRIS bit in the GPTMRIS register is set,
and the timer continues counting. In One-Shot mode, the timer stops counting after the time-out
event. To re-enable the timer, repeat the sequence. A timer configured in Periodic mode reloads
the timer and continues counting after the time-out event.
10.4.2
Real-Time Clock (RTC) Mode
To use the RTC mode, the timer must have a 32.768-KHz input signal on an even CCP input. To
enable the RTC feature, follow these steps:
1. Ensure the timer is disabled (the TAEN bit is cleared) before making any changes.
2. Write the GPTM Configuration Register (GPTMCFG) with a value of 0x0000.0001.
3. Write the match value to the GPTM Timer n Match Register (GPTMTnMATCHR).
4. Set/clear the RTCEN bit in the GPTM Control Register (GPTMCTL) as needed.
5. If interrupts are required, set the RTCIM bit in the GPTM Interrupt Mask Register (GPTMIMR).
6. Set the TAEN bit in the GPTMCTL register to enable the timer and start counting.
When the timer count equals the value in the GPTMTnMATCHR register, the GPTM asserts the
RTCRIS bit in the GPTMRIS register and continues counting until Timer A is disabled or a hardware
reset. The interrupt is cleared by writing the RTCCINT bit in the GPTMICR register.
10.4.3
Input Edge-Count Mode
A timer is configured to Input Edge-Count mode by the following sequence:
1. Ensure the timer is disabled (the TnEN bit is cleared) before making any changes.
2. Write the GPTM Configuration (GPTMCFG) register with a value of 0x0000.0004.
3. In the GPTM Timer Mode (GPTMTnMR) register, write the TnCMR field to 0x0 and the TnMR
field to 0x3.
July 25, 2011
461
Texas Instruments-Production Data
General-Purpose Timers
4. Configure the type of event(s) that the timer captures by writing the TnEVENT field of the GPTM
Control (GPTMCTL) register.
5. If a prescaler is to be used, write the prescale value to the GPTM Timer n Prescale Register
(GPTMTnPR).
6. Load the timer start value into the GPTM Timer n Interval Load (GPTMTnILR) register.
7. Load the event count into the GPTM Timer n Match (GPTMTnMATCHR) register.
8. If interrupts are required, set the CnMIM bit in the GPTM Interrupt Mask (GPTMIMR) register.
9. Set the TnEN bit in the GPTMCTL register to enable the timer and begin waiting for edge events.
10. Poll the CnMRIS bit in the GPTMRIS register or wait for the interrupt to be generated (if enabled).
In both cases, the status flags are cleared by writing a 1 to the CnMCINT bit of the GPTM
Interrupt Clear (GPTMICR) register.
When counting down in Input Edge-Count Mode, the timer stops after the programmed number of
edge events has been detected. To re-enable the timer, ensure that the TnEN bit is cleared and
repeat step 4 on page 462 through step 9 on page 462.
10.4.4
Input Edge Timing Mode
A timer is configured to Input Edge Timing mode by the following sequence:
1. Ensure the timer is disabled (the TnEN bit is cleared) before making any changes.
2. Write the GPTM Configuration (GPTMCFG) register with a value of 0x0000.0004.
3. In the GPTM Timer Mode (GPTMTnMR) register, write the TnCMR field to 0x1 and the TnMR
field to 0x3.
4. Configure the type of event that the timer captures by writing the TnEVENT field of the GPTM
Control (GPTMCTL) register.
5. Load the timer start value into the GPTM Timer n Interval Load (GPTMTnILR) register.
6. If interrupts are required, set the CnEIM bit in the GPTM Interrupt Mask (GPTMIMR) register.
7. Set the TnEN bit in the GPTM Control (GPTMCTL) register to enable the timer and start counting.
8. Poll the CnERIS bit in the GPTMRIS register or wait for the interrupt to be generated (if enabled).
In both cases, the status flags are cleared by writing a 1 to the CnECINT bit of the GPTM
Interrupt Clear (GPTMICR) register. The time at which the event happened can be obtained
by reading the GPTM Timer n (GPTMTnR) register.
In Input Edge Timing mode, the timer continues running after an edge event has been detected,
but the timer interval can be changed at any time by writing the GPTMTnILR register. The change
takes effect at the next cycle after the write.
10.4.5
PWM Mode
A timer is configured to PWM mode using the following sequence:
1. Ensure the timer is disabled (the TnEN bit is cleared) before making any changes.
462
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
2. Write the GPTM Configuration (GPTMCFG) register with a value of 0x0000.0004.
3. In the GPTM Timer Mode (GPTMTnMR) register, set the TnAMS bit to 0x1, the TnCMR bit to
0x0, and the TnMR field to 0x2.
4. Configure the output state of the PWM signal (whether or not it is inverted) in the TnPWML field
of the GPTM Control (GPTMCTL) register.
5. Load the timer start value into the GPTM Timer n Interval Load (GPTMTnILR) register.
6. Load the GPTM Timer n Match (GPTMTnMATCHR) register with the match value.
7. Set the TnEN bit in the GPTM Control (GPTMCTL) register to enable the timer and begin
generation of the output PWM signal.
In PWM Timing mode, the timer continues running after the PWM signal has been generated. The
PWM period can be adjusted at any time by writing the GPTMTnILR register, and the change takes
effect at the next cycle after the write.
10.5
Register Map
Table 10-6 on page 463 lists the GPTM registers. The offset listed is a hexadecimal increment to the
register’s address, relative to that timer’s base address:
■
■
■
■
Timer 0: 0x4003.0000
Timer 1: 0x4003.1000
Timer 2: 0x4003.2000
Timer 3: 0x4003.3000
Note that the GP Timer module clock must be enabled before the registers can be programmed
(see page 243). There must be a delay of 3 system clocks after the Timer module clock is enabled
before any Timer module registers are accessed.
Table 10-6. Timers Register Map
Description
See
page
Offset
Name
Type
Reset
0x000
GPTMCFG
R/W
0x0000.0000
GPTM Configuration
465
0x004
GPTMTAMR
R/W
0x0000.0000
GPTM Timer A Mode
466
0x008
GPTMTBMR
R/W
0x0000.0000
GPTM Timer B Mode
468
0x00C
GPTMCTL
R/W
0x0000.0000
GPTM Control
470
0x018
GPTMIMR
R/W
0x0000.0000
GPTM Interrupt Mask
473
0x01C
GPTMRIS
RO
0x0000.0000
GPTM Raw Interrupt Status
475
0x020
GPTMMIS
RO
0x0000.0000
GPTM Masked Interrupt Status
478
0x024
GPTMICR
W1C
0x0000.0000
GPTM Interrupt Clear
481
0x028
GPTMTAILR
R/W
0xFFFF.FFFF
GPTM Timer A Interval Load
483
0x02C
GPTMTBILR
R/W
0x0000.FFFF
GPTM Timer B Interval Load
484
0x030
GPTMTAMATCHR
R/W
0xFFFF.FFFF
GPTM Timer A Match
485
July 25, 2011
463
Texas Instruments-Production Data
General-Purpose Timers
Table 10-6. Timers Register Map (continued)
Name
Type
Reset
0x034
GPTMTBMATCHR
R/W
0x0000.FFFF
GPTM Timer B Match
486
0x038
GPTMTAPR
R/W
0x0000.0000
GPTM Timer A Prescale
487
0x03C
GPTMTBPR
R/W
0x0000.0000
GPTM Timer B Prescale
488
0x040
GPTMTAPMR
R/W
0x0000.0000
GPTM TimerA Prescale Match
489
0x044
GPTMTBPMR
R/W
0x0000.0000
GPTM TimerB Prescale Match
490
0x048
GPTMTAR
RO
0xFFFF.FFFF
GPTM Timer A
491
0x04C
GPTMTBR
RO
0x0000.FFFF
GPTM Timer B
492
0x050
GPTMTAV
RW
0xFFFF.FFFF
GPTM Timer A Value
493
0x054
GPTMTBV
RW
0x0000.FFFF
GPTM Timer B Value
494
10.6
Description
See
page
Offset
Register Descriptions
The remainder of this section lists and describes the GPTM registers, in numerical order by address
offset.
464
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 1: GPTM Configuration (GPTMCFG), offset 0x000
This register configures the global operation of the GPTM module. The value written to this register
determines whether the GPTM is in 32- or 16-bit mode.
Important: Bits in this register should only be changed when the TAEN and TBEN bits in the
GPTMCTL register are cleared.
GPTM Configuration (GPTMCFG)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x000
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:3
reserved
RO
0x0000.000
2:0
GPTMCFG
R/W
0x0
GPTMCFG
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM Configuration
The GPTMCFG values are defined as follows:
Value
Description
0x0
32-bit timer configuration.
0x1
32-bit real-time clock (RTC) counter configuration.
0x2-0x3 Reserved
0x4
16-bit timer configuration.
The function is controlled by bits 1:0 of GPTMTAMR and
GPTMTBMR.
0x5-0x7 Reserved
July 25, 2011
465
Texas Instruments-Production Data
General-Purpose Timers
Register 2: GPTM Timer A Mode (GPTMTAMR), offset 0x004
This register configures the GPTM based on the configuration selected in the GPTMCFG register.
When in PWM mode, set the TAAMS bit, clear the TACMR bit, and configure the TAMR field to 0x1 or
0x2.
This register controls the modes for Timer A when it is used individually. When Timer A and Timer
B are concatenated, this register controls the modes for both Timer A and Timer B, and the contents
of GPTMTBMR are ignored.
Important: Bits in this register should only be changed when the TAEN bit in the GPTMCTL register
is cleared.
GPTM Timer A Mode (GPTMTAMR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x004
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
1
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
TASNAPS TAWOT
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7
TASNAPS
R/W
0
RO
0
R/W
0
R/W
0
5
4
3
2
TAMIE
TACDIR
TAAMS
TACMR
R/W
0
R/W
0
R/W
0
R/W
0
0
TAMR
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM Timer A Snap-Shot Mode
Value Description
6
TAWOT
R/W
0
0
Snap-shot mode is disabled.
1
If Timer A is configured in the periodic mode, the actual
free-running value of Timer A is loaded at the time-out event
into the GPTM Timer A (GPTMTAR) register.
GPTM Timer A Wait-on-Trigger
Value Description
0
Timer A begins counting as soon as it is enabled.
1
If Timer A is enabled (TAEN is set in the GPTMCTL register),
Timer A does not begin counting until it receives a trigger from
the timer in the previous position in the daisy chain, see Figure
10-2 on page 456. This function is valid for both one-shot and
periodic modes.
This bit must be clear for GP Timer Module 0, Timer A.
466
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
5
TAMIE
R/W
0
Description
GPTM Timer A Match Interrupt Enable
Value Description
4
TACDIR
R/W
0
0
The match interrupt is disabled.
1
An interrupt is generated when the match value in the
GPTMTAMATCHR register is reached in the one-shot and
periodic modes.
GPTM Timer A Count Direction
Value Description
0
The timer counts down.
1
When in one-shot or periodic mode, the timer counts up. When
counting up, the timer starts from a value of 0x0.
When in PWM or RTC mode, the status of this bit is ignored. PWM mode
always counts down and RTC mode always counts up.
3
TAAMS
R/W
0
GPTM Timer A Alternate Mode Select
The TAAMS values are defined as follows:
Value Description
0
Capture mode is enabled.
1
PWM mode is enabled.
Note:
2
TACMR
R/W
0
To enable PWM mode, you must also clear the TACMR
bit and configure the TAMR field to 0x1 or 0x2.
GPTM Timer A Capture Mode
The TACMR values are defined as follows:
Value Description
1:0
TAMR
R/W
0x0
0
Edge-Count mode
1
Edge-Time mode
GPTM Timer A Mode
The TAMR values are defined as follows:
Value Description
0x0
Reserved
0x1
One-Shot Timer mode
0x2
Periodic Timer mode
0x3
Capture mode
The Timer mode is based on the timer configuration defined by bits 2:0
in the GPTMCFG register.
July 25, 2011
467
Texas Instruments-Production Data
General-Purpose Timers
Register 3: GPTM Timer B Mode (GPTMTBMR), offset 0x008
This register configures the GPTM based on the configuration selected in the GPTMCFG register.
When in PWM mode, set the TBAMS bit, clear the TBCMR bit, and configure the TBMR field to 0x1 or
0x2.
This register controls the modes for Timer B when it is used individually. When Timer A and Timer
B are concatenated, this register is ignored and GPTMTBMR controls the modes for both Timer A
and Timer B.
Important: Bits in this register should only be changed when the TBEN bit in the GPTMCTL register
is cleared.
GPTM Timer B Mode (GPTMTBMR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x008
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
1
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
TBSNAPS TBWOT
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7
TBSNAPS
R/W
0
RO
0
R/W
0
R/W
0
5
4
3
2
TBMIE
TBCDIR
TBAMS
TBCMR
R/W
0
R/W
0
R/W
0
R/W
0
0
TBMR
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM Timer B Snap-Shot Mode
Value Description
6
TBWOT
R/W
0
0
Snap-shot mode is disabled.
1
If Timer B is configured in the periodic mode, the actual
free-running value of Timer B is loaded at the time-out event
into the GPTM Timer B (GPTMTBR) register.
GPTM Timer B Wait-on-Trigger
Value Description
0
Timer B begins counting as soon as it is enabled.
1
If Timer B is enabled (TBEN is set in the GPTMCTL register),
Timer B does not begin counting until it receives an it receives
a trigger from the timer in the previous position in the daisy
chain, see Figure 10-2 on page 456. This function is valid for
both one-shot and periodic modes.
468
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
5
TBMIE
R/W
0
Description
GPTM Timer B Match Interrupt Enable
Value Description
4
TBCDIR
R/W
0
0
The match interrupt is disabled.
1
An interrupt is generated when the match value in the
GPTMTBMATCHR register is reached in the one-shot and
periodic modes.
GPTM Timer B Count Direction
Value Description
0
The timer counts down.
1
When in one-shot or periodic mode, the timer counts up. When
counting up, the timer starts from a value of 0x0.
When in PWM or RTC mode, the status of this bit is ignored. PWM mode
always counts down and RTC mode always counts up.
3
TBAMS
R/W
0
GPTM Timer B Alternate Mode Select
The TBAMS values are defined as follows:
Value Description
0
Capture mode is enabled.
1
PWM mode is enabled.
Note:
2
TBCMR
R/W
0
To enable PWM mode, you must also clear the TBCMR
bit and configure the TBMR field to 0x1 or 0x2.
GPTM Timer B Capture Mode
The TBCMR values are defined as follows:
Value Description
1:0
TBMR
R/W
0x0
0
Edge-Count mode
1
Edge-Time mode
GPTM Timer B Mode
The TBMR values are defined as follows:
Value Description
0x0
Reserved
0x1
One-Shot Timer mode
0x2
Periodic Timer mode
0x3
Capture mode
The timer mode is based on the timer configuration defined by bits 2:0
in the GPTMCFG register.
July 25, 2011
469
Texas Instruments-Production Data
General-Purpose Timers
Register 4: GPTM Control (GPTMCTL), offset 0x00C
This register is used alongside the GPTMCFG and GMTMTnMR registers to fine-tune the timer
configuration, and to enable other features such as timer stall and the output trigger. The output
trigger can be used to initiate transfers on the ADC module.
Important: Bits in this register should only be changed when the TnEN bit for the respective timer
is cleared.
GPTM Control (GPTMCTL)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x00C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
reserved
TBPWML
TBOTE
reserved
RO
0
R/W
0
R/W
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
TBSTALL
TBEN
reserved
TAPWML
TAOTE
RTCEN
TASTALL
TAEN
R/W
0
R/W
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
Type
Reset
TBEVENT
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
31:15
reserved
RO
0x0000.0
14
TBPWML
R/W
0
TAEVENT
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM Timer B PWM Output Level
The TBPWML values are defined as follows:
Value Description
13
TBOTE
R/W
0
0
Output is unaffected.
1
Output is inverted.
GPTM Timer B Output Trigger Enable
The TBOTE values are defined as follows:
Value Description
0
The output Timer B ADC trigger is disabled.
1
The output Timer B ADC trigger is enabled.
In addition, the ADC must be enabled and the timer selected as a trigger
source with the EMn bit in the ADCEMUX register (see page 552).
12
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
470
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
11:10
TBEVENT
R/W
0x0
Description
GPTM Timer B Event Mode
The TBEVENT values are defined as follows:
Value Description
9
TBSTALL
R/W
0
0x0
Positive edge
0x1
Negative edge
0x2
Reserved
0x3
Both edges
GPTM Timer B Stall Enable
The TBSTALL values are defined as follows:
Value Description
0
Timer B continues counting while the processor is halted by the
debugger.
1
Timer B freezes counting while the processor is halted by the
debugger.
If the processor is executing normally, the TBSTALL bit is ignored.
8
TBEN
R/W
0
GPTM Timer B Enable
The TBEN values are defined as follows:
Value Description
0
Timer B is disabled.
1
Timer B is enabled and begins counting or the capture logic is
enabled based on the GPTMCFG register.
7
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
6
TAPWML
R/W
0
GPTM Timer A PWM Output Level
The TAPWML values are defined as follows:
Value Description
5
TAOTE
R/W
0
0
Output is unaffected.
1
Output is inverted.
GPTM Timer A Output Trigger Enable
The TAOTE values are defined as follows:
Value Description
0
The output Timer A ADC trigger is disabled.
1
The output Timer A ADC trigger is enabled.
In addition, the ADC must be enabled and the timer selected as a trigger
source with the EMn bit in the ADCEMUX register (see page 552).
July 25, 2011
471
Texas Instruments-Production Data
General-Purpose Timers
Bit/Field
Name
Type
Reset
4
RTCEN
R/W
0
Description
GPTM RTC Enable
The RTCEN values are defined as follows:
Value Description
3:2
TAEVENT
R/W
0x0
0
RTC counting is disabled.
1
RTC counting is enabled.
GPTM Timer A Event Mode
The TAEVENT values are defined as follows:
Value Description
1
TASTALL
R/W
0
0x0
Positive edge
0x1
Negative edge
0x2
Reserved
0x3
Both edges
GPTM Timer A Stall Enable
The TASTALL values are defined as follows:
Value Description
0
Timer A continues counting while the processor is halted by the
debugger.
1
Timer A freezes counting while the processor is halted by the
debugger.
If the processor is executing normally, the TASTALL bit is ignored.
0
TAEN
R/W
0
GPTM Timer A Enable
The TAEN values are defined as follows:
Value Description
0
Timer A is disabled.
1
Timer A is enabled and begins counting or the capture logic is
enabled based on the GPTMCFG register.
472
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 5: GPTM Interrupt Mask (GPTMIMR), offset 0x018
This register allows software to enable/disable GPTM controller-level interrupts. Setting a bit enables
the corresponding interrupt, while clearing a bit disables it.
GPTM Interrupt Mask (GPTMIMR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x018
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
6
5
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
15
14
13
12
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
11
10
9
8
TBMIM
CBEIM
CBMIM
TBTOIM
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
31:12
reserved
RO
0x0000.0
11
TBMIM
R/W
0
reserved
RO
0
RO
0
RO
0
4
3
2
1
0
TAMIM
RTCIM
CAEIM
CAMIM
TATOIM
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM Timer B Mode Match Interrupt Mask
The TBMIM values are defined as follows:
Value Description
10
CBEIM
R/W
0
0
Interrupt is disabled.
1
Interrupt is enabled.
GPTM Capture B Event Interrupt Mask
The CBEIM values are defined as follows:
Value Description
9
CBMIM
R/W
0
0
Interrupt is disabled.
1
Interrupt is enabled.
GPTM Capture B Match Interrupt Mask
The CBMIM values are defined as follows:
Value Description
0
Interrupt is disabled.
1
Interrupt is enabled.
July 25, 2011
473
Texas Instruments-Production Data
General-Purpose Timers
Bit/Field
Name
Type
Reset
8
TBTOIM
R/W
0
Description
GPTM Timer B Time-Out Interrupt Mask
The TBTOIM values are defined as follows:
Value Description
0
Interrupt is disabled.
1
Interrupt is enabled.
7:5
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
4
TAMIM
R/W
0
GPTM Timer A Mode Match Interrupt Mask
The TAMIM values are defined as follows:
Value Description
3
RTCIM
R/W
0
0
Interrupt is disabled.
1
Interrupt is enabled.
GPTM RTC Interrupt Mask
The RTCIM values are defined as follows:
Value Description
2
CAEIM
R/W
0
0
Interrupt is disabled.
1
Interrupt is enabled.
GPTM Capture A Event Interrupt Mask
The CAEIM values are defined as follows:
Value Description
1
CAMIM
R/W
0
0
Interrupt is disabled.
1
Interrupt is enabled.
GPTM Capture A Match Interrupt Mask
The CAMIM values are defined as follows:
Value Description
0
TATOIM
R/W
0
0
Interrupt is disabled.
1
Interrupt is enabled.
GPTM Timer A Time-Out Interrupt Mask
The TATOIM values are defined as follows:
Value Description
0
Interrupt is disabled.
1
Interrupt is enabled.
474
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 6: GPTM Raw Interrupt Status (GPTMRIS), offset 0x01C
This register shows the state of the GPTM's internal interrupt signal. These bits are set whether or
not the interrupt is masked in the GPTMIMR register. Each bit can be cleared by writing a 1 to its
corresponding bit in GPTMICR.
GPTM Raw Interrupt Status (GPTMRIS)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x01C
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
6
5
1
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
15
14
13
12
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
11
10
TBMRIS
CBERIS
RO
0
RO
0
RO
0
RO
0
RO
0
9
8
7
CBMRIS TBTORIS
RO
0
Bit/Field
Name
Type
Reset
31:12
reserved
RO
0x0000.0
11
TBMRIS
RO
0
RO
0
reserved
RO
0
RO
0
RO
0
4
3
2
TAMRIS
RTCRIS
CAERIS
RO
0
RO
0
RO
0
CAMRIS TATORIS
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM Timer B Mode Match Raw Interrupt
Value Description
1
The TBMIE bit is set in the GPTMTBMR register, and the match
value in the GPTMTBMATCHR register has been reached when
in the one-shot and periodic modes.
0
The match value has not been reached.
This bit is cleared by writing a 1 to the TBMCINT bit in the GPTMICR
register.
10
CBERIS
RO
0
GPTM Capture B Event Raw Interrupt
Value Description
1
The Capture B event has occurred.
0
The Capture B event has not occurred.
This bit is cleared by writing a 1 to the CBECINT bit in the GPTMICR
register.
9
CBMRIS
RO
0
GPTM Capture B Match Raw Interrupt
Value Description
1
The Capture B match has occurred.
0
The Capture B match has not occurred.
This bit is cleared by writing a 1 to the CBMCINT bit in the GPTMICR
register.
July 25, 2011
475
Texas Instruments-Production Data
General-Purpose Timers
Bit/Field
Name
Type
Reset
8
TBTORIS
RO
0
Description
GPTM Timer B Time-Out Raw Interrupt
Value Description
1
Timer B has timed out.
0
Timer B has not timed out.
This bit is cleared by writing a 1 to the TBTOCINT bit in the GPTMICR
register.
7:5
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
4
TAMRIS
RO
0
GPTM Timer A Mode Match Raw Interrupt
Value Description
1
The TAMIE bit is set in the GPTMTAMR register, and the match
value in the GPTMTAMATCHR register has been reached when
in the one-shot and periodic modes.
0
The match value has not been reached.
This bit is cleared by writing a 1 to the TAMCINT bit in the GPTMICR
register.
3
RTCRIS
RO
0
GPTM RTC Raw Interrupt
Value Description
1
The RTC event has occurred.
0
The RTC event has not occurred.
This bit is cleared by writing a 1 to the RTCCINT bit in the GPTMICR
register.
2
CAERIS
RO
0
GPTM Capture A Event Raw Interrupt
Value Description
1
The Capture A event has occurred.
0
The Capture A event has not occurred.
This bit is cleared by writing a 1 to the CAECINT bit in the GPTMICR
register.
1
CAMRIS
RO
0
GPTM Capture A Match Raw Interrupt
Value Description
1
The Capture A match has occurred.
0
The Capture A match has not occurred.
This bit is cleared by writing a 1 to the CAMCINT bit in the GPTMICR
register.
476
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
0
TATORIS
RO
0
Description
GPTM Timer A Time-Out Raw Interrupt
Value Description
1
Timer A has timed out.
0
Timer A has not timed out.
This bit is cleared by writing a 1 to the TATOCINT bit in the GPTMICR
register.
July 25, 2011
477
Texas Instruments-Production Data
General-Purpose Timers
Register 7: GPTM Masked Interrupt Status (GPTMMIS), offset 0x020
This register show the state of the GPTM's controller-level interrupt. If an interrupt is unmasked in
GPTMIMR, and there is an event that causes the interrupt to be asserted, the corresponding bit is
set in this register. All bits are cleared by writing a 1 to the corresponding bit in GPTMICR.
GPTM Masked Interrupt Status (GPTMMIS)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x020
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
6
5
2
1
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
15
14
13
12
reserved
Type
Reset
RO
0
RO
0
RO
0
11
TBMMIS
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
10
9
8
7
CBEMIS CBMMIS TBTOMIS
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:12
reserved
RO
0x0000.0
11
TBMMIS
RO
0
RO
0
reserved
RO
0
RO
0
RO
0
4
3
TAMMIS
RTCMIS
RO
0
RO
0
CAEMIS CAMMIS TATOMIS
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM Timer B Mode Match Masked Interrupt
Value Description
1
An unmasked Timer B Mode Match interrupt
has occurred.
0
A Timer B Mode Match interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the TBMCINT bit in the GPTMICR
register.
10
CBEMIS
RO
0
GPTM Capture B Event Masked Interrupt
Value Description
1
An unmasked Capture B event interrupt
has occurred.
0
A Capture B event interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the CBECINT bit in the GPTMICR
register.
478
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
9
CBMMIS
RO
0
Description
GPTM Capture B Match Masked Interrupt
Value Description
1
An unmasked Capture B Match interrupt
has occurred.
0
A Capture B Mode Match interrupt has not occurred or is
masked.
This bit is cleared by writing a 1 to the CBMCINT bit in the GPTMICR
register.
8
TBTOMIS
RO
0
GPTM Timer B Time-Out Masked Interrupt
Value Description
1
An unmasked Timer B Time-Out interrupt
has occurred.
0
A Timer B Time-Out interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the TBTOCINT bit in the GPTMICR
register.
7:5
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
4
TAMMIS
RO
0
GPTM Timer A Mode Match Masked Interrupt
Value Description
1
An unmasked Timer A Mode Match interrupt
has occurred.
0
A Timer A Mode Match interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the TAMCINT bit in the GPTMICR
register.
3
RTCMIS
RO
0
GPTM RTC Masked Interrupt
Value Description
1
An unmasked RTC event interrupt
has occurred.
0
An RTC event interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the RTCCINT bit in the GPTMICR
register.
2
CAEMIS
RO
0
GPTM Capture A Event Masked Interrupt
Value Description
1
An unmasked Capture A event interrupt
has occurred.
0
A Capture A event interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the CAECINT bit in the GPTMICR
register.
July 25, 2011
479
Texas Instruments-Production Data
General-Purpose Timers
Bit/Field
Name
Type
Reset
1
CAMMIS
RO
0
Description
GPTM Capture A Match Masked Interrupt
Value Description
1
An unmasked Capture A Match interrupt
has occurred.
0
A Capture A Mode Match interrupt has not occurred or is
masked.
This bit is cleared by writing a 1 to the CAMCINT bit in the GPTMICR
register.
0
TATOMIS
RO
0
GPTM Timer A Time-Out Masked Interrupt
Value Description
1
An unmasked Timer A Time-Out interrupt
has occurred.
0
A Timer A Time-Out interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the TATOCINT bit in the GPTMICR
register.
480
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 8: GPTM Interrupt Clear (GPTMICR), offset 0x024
This register is used to clear the status bits in the GPTMRIS and GPTMMIS registers. Writing a 1
to a bit clears the corresponding bit in the GPTMRIS and GPTMMIS registers.
GPTM Interrupt Clear (GPTMICR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x024
Type W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
6
5
4
3
2
1
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
15
14
13
12
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
11
10
9
8
7
TBMCINT CBECINT CBMCINT TBTOCINT
RO
0
RO
0
W1C
0
W1C
0
W1C
0
Bit/Field
Name
Type
Reset
31:12
reserved
RO
0x0000.0
11
TBMCINT
W1C
0
W1C
0
reserved
RO
0
RO
0
TAMCINT RTCCINT CAECINT CAMCINT TATOCINT
RO
0
W1C
0
W1C
0
W1C
0
W1C
0
W1C
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM Timer B Mode Match Interrupt Clear
Writing a 1 to this bit clears the TBMRIS bit in the GPTMRIS register
and the TBMMIS bit in the GPTMMIS register.
10
CBECINT
W1C
0
GPTM Capture B Event Interrupt Clear
Writing a 1 to this bit clears the CBERIS bit in the GPTMRIS register
and the CBEMIS bit in the GPTMMIS register.
9
CBMCINT
W1C
0
GPTM Capture B Match Interrupt Clear
Writing a 1 to this bit clears the CBMRIS bit in the GPTMRIS register
and the CBMMIS bit in the GPTMMIS register.
8
TBTOCINT
W1C
0
GPTM Timer B Time-Out Interrupt Clear
Writing a 1 to this bit clears the TBTORIS bit in the GPTMRIS register
and the TBTOMIS bit in the GPTMMIS register.
7:5
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
4
TAMCINT
W1C
0
GPTM Timer A Mode Match Interrupt Clear
Writing a 1 to this bit clears the TAMRIS bit in the GPTMRIS register
and the TAMMIS bit in the GPTMMIS register.
3
RTCCINT
W1C
0
GPTM RTC Interrupt Clear
Writing a 1 to this bit clears the RTCRIS bit in the GPTMRIS register
and the RTCMIS bit in the GPTMMIS register.
2
CAECINT
W1C
0
GPTM Capture A Event Interrupt Clear
Writing a 1 to this bit clears the CAERIS bit in the GPTMRIS register
and the CAEMIS bit in the GPTMMIS register.
July 25, 2011
481
Texas Instruments-Production Data
General-Purpose Timers
Bit/Field
Name
Type
Reset
1
CAMCINT
W1C
0
Description
GPTM Capture A Match Interrupt Clear
Writing a 1 to this bit clears the CAMRIS bit in the GPTMRIS register
and the CAMMIS bit in the GPTMMIS register.
0
TATOCINT
W1C
0
GPTM Timer A Time-Out Raw Interrupt
Writing a 1 to this bit clears the TATORIS bit in the GPTMRIS register
and the TATOMIS bit in the GPTMMIS register.
482
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 9: GPTM Timer A Interval Load (GPTMTAILR), offset 0x028
When the timer is counting down, this register is used to load the starting count value into the timer.
When the timer is counting up, this register sets the upper bound for the timeout event.
When a GPTM is configured to one of the 32-bit modes, GPTMTAILR appears as a 32-bit register
(the upper 16-bits correspond to the contents of the GPTM Timer B Interval Load (GPTMTBILR)
register). In a 16-bit mode, the upper 16 bits of this register read as 0s and have no effect on the
state of GPTMTBILR.
GPTM Timer A Interval Load (GPTMTAILR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x028
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
TAILR
Type
Reset
TAILR
Type
Reset
Bit/Field
Name
Type
31:0
TAILR
R/W
Reset
Description
0xFFFF.FFFF GPTM Timer A Interval Load Register
Writing this field loads the counter for Timer A. A read returns the current
value of GPTMTAILR.
July 25, 2011
483
Texas Instruments-Production Data
General-Purpose Timers
Register 10: GPTM Timer B Interval Load (GPTMTBILR), offset 0x02C
When the timer is counting down, this register is used to load the starting count value into the timer.
When the timer is counting up, this register sets the upper bound for the timeout event.
When a GPTM is configured to one of the 32-bit modes, the contents of bits 15:0 in this register are
loaded into the upper 16 bits of the GPTMTAILR register. Reads from this register return the current
value of Timer B and writes are ignored. In a 16-bit mode, bits 15:0 are used for the load value. Bits
31:16 are reserved in both cases.
GPTM Timer B Interval Load (GPTMTBILR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x02C
Type R/W, reset 0x0000.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
TBILR
Type
Reset
TBILR
Type
Reset
Bit/Field
Name
Type
31:0
TBILR
R/W
Reset
Description
0x0000.FFFF GPTM Timer B Interval Load Register
Writing this field loads the counter for Timer B. A read returns the current
value of GPTMTBILR.
When a GPTM is in 32-bit mode, writes are ignored, and reads return
the current value of GPTMTBILR.
484
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 11: GPTM Timer A Match (GPTMTAMATCHR), offset 0x030
This register is loaded with a match value. Interrupts can be generated when the timer value is equal
to the value in this register in one-shot or periodic mode.
In Edge-Count mode, this register along with GPTMTAILR, determines how many edge events are
counted. The total number of edge events counted is equal to the value in GPTMTAILR minus this
value.
In PWM mode, this value along with GPTMTAILR, determines the duty cycle of the output PWM
signal.
When a GPTM is configured to one of the 32-bit modes, GPTMTAMATCHR appears as a 32-bit
register (the upper 16-bits correspond to the contents of the GPTM Timer B Match
(GPTMTBMATCHR) register). In a 16-bit mode, the upper 16 bits of this register read as 0s and
have no effect on the state of GPTMTBMATCHR.
GPTM Timer A Match (GPTMTAMATCHR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x030
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
TAMR
Type
Reset
TAMR
Type
Reset
Bit/Field
Name
Type
31:0
TAMR
R/W
Reset
Description
0xFFFF.FFFF GPTM Timer A Match Register
This value is compared to the GPTMTAR register to determine match
events.
July 25, 2011
485
Texas Instruments-Production Data
General-Purpose Timers
Register 12: GPTM Timer B Match (GPTMTBMATCHR), offset 0x034
This register is loaded with a match value. Interrupts can be generated when the timer value is equal
to the value in this register in one-shot or periodic mode.
In Edge-Count mode, this register along with GPTMTBILR, determines how many edge events are
counted. The total number of edge events counted is equal to the value in GPTMTBILR minus this
value.
In PWM mode, this value along with GPTMTBILR, determines the duty cycle of the output PWM
signal.
When a GPTM is configured to one of the 32-bit modes, the contents of bits 15:0 in this register are
loaded into the upper 16 bits of the GPTMTAMATCHR register. Reads from this register return the
current match value of Timer B and writes are ignored. In a 16-bit mode, bits 15:0 are used for the
match value. Bits 31:16 are reserved in both cases.
GPTM Timer B Match (GPTMTBMATCHR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x034
Type R/W, reset 0x0000.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
TBMR
Type
Reset
TBMR
Type
Reset
Bit/Field
Name
Type
31:0
TBMR
R/W
Reset
Description
0x0000.FFFF GPTM Timer B Match Register
This value is compared to the GPTMTBR register to determine match
events.
486
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 13: GPTM Timer A Prescale (GPTMTAPR), offset 0x038
This register allows software to extend the range of the 16-bit timers in periodic and one-shot modes.
In Edge-Count mode, this register is the MSB of the 24-bit count value.
GPTM Timer A Prescale (GPTMTAPR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x038
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
TAPSR
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000
7:0
TAPSR
R/W
0x00
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM Timer A Prescale
The register loads this value on a write. A read returns the current value
of the register.
Refer to Table 10-5 on page 455 for more details and an example.
July 25, 2011
487
Texas Instruments-Production Data
General-Purpose Timers
Register 14: GPTM Timer B Prescale (GPTMTBPR), offset 0x03C
This register allows software to extend the range of the 16-bit timers in periodic and one-shot modes.
In Edge-Count mode, this register is the MSB of the 24-bit count value.
GPTM Timer B Prescale (GPTMTBPR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x03C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
TBPSR
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000
7:0
TBPSR
R/W
0x00
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM Timer B Prescale
The register loads this value on a write. A read returns the current value
of this register.
Refer to Table 10-5 on page 455 for more details and an example.
488
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 15: GPTM TimerA Prescale Match (GPTMTAPMR), offset 0x040
This register effectively extends the range of GPTMTAMATCHR to 24 bits when operating in 16-bit
one-shot or periodic mode.
GPTM TimerA Prescale Match (GPTMTAPMR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x040
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
TAPSMR
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000
7:0
TAPSMR
R/W
0x00
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM TimerA Prescale Match
This value is used alongside GPTMTAMATCHR to detect timer match
events while using a prescaler.
July 25, 2011
489
Texas Instruments-Production Data
General-Purpose Timers
Register 16: GPTM TimerB Prescale Match (GPTMTBPMR), offset 0x044
This register effectively extends the range of GPTMTBMATCHR to 24 bits when operating in 16-bit
one-shot or periodic mode.
GPTM TimerB Prescale Match (GPTMTBPMR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x044
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
TBPSMR
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000
7:0
TBPSMR
R/W
0x00
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
GPTM TimerB Prescale Match
This value is used alongside GPTMTBMATCHR to detect timer match
events while using a prescaler.
490
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 17: GPTM Timer A (GPTMTAR), offset 0x048
This register shows the current value of the Timer A counter in all cases except for Input Edge Count
and Time modes. In the Input Edge Count mode, this register contains the number of edges that
have occurred. In the Input Edge Time mode, this register contains the time at which the last edge
event took place. Also in Input Edge-Count mode, bits 23:16 contain the upper 8 bits of the count.
When a GPTM is configured to one of the 32-bit modes, GPTMTAR appears as a 32-bit register
(the upper 16-bits correspond to the contents of the GPTM Timer B (GPTMTBR) register). In
the16-bit Input Edge Count, Input Edge Time, and PWM modes, bits 15:0 contain the value of the
counter and bits 23:16 contain the value of the prescaler, which is the upper 8 bits of the count. Bits
31:24 always read as 0. To read the value of the prescaler in 16-bit One-Shot and Periodic modes,
read bits [23:16] in the GPTMTAV register.
GPTM Timer A (GPTMTAR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x048
Type RO, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
TAR
Type
Reset
TAR
Type
Reset
Bit/Field
Name
Type
31:0
TAR
RO
Reset
Description
0xFFFF.FFFF GPTM Timer A Register
A read returns the current value of the GPTM Timer A Count Register,
in all cases except for Input Edge Count and Time modes. In the Input
Edge Count mode, this register contains the number of edges that have
occurred. In the Input Edge Time mode, this register contains the time
at which the last edge event took place.
July 25, 2011
491
Texas Instruments-Production Data
General-Purpose Timers
Register 18: GPTM Timer B (GPTMTBR), offset 0x04C
This register shows the current value of the Timer B counter in all cases except for Input Edge Count
and Time modes. In the Input Edge Count mode, this register contains the number of edges that
have occurred. In the Input Edge Time mode, this register contains the time at which the last edge
event took place. Also in Input Edge-Count mode, bits 23:16 contain the upper 8 bits of the count.
When a GPTM is configured to one of the 32-bit modes, the contents of bits 15:0 in this register are
loaded into the upper 16 bits of the GPTMTAR register. Reads from this register return the current
value of Timer B. In a 16-bit mode, bits 15:0 contain the value of the counter and bits 23:16 contain
the value of the prescaler in Input Edge Count, Input Edge Time, and PWM modes, which is the
upper 8 bits of the count. Bits 31:24 are reserved in both cases.
GPTM Timer B (GPTMTBR)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x04C
Type RO, reset 0x0000.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
TBR
Type
Reset
TBR
Type
Reset
Bit/Field
Name
Type
31:0
TBR
RO
Reset
Description
0x0000.FFFF GPTM Timer B Register
A read returns the current value of the GPTM Timer B Count Register,
in all cases except for Input Edge Count and Time modes. In the Input
Edge Count mode, this register contains the number of edges that have
occurred. In the Input Edge Time mode, this register contains the time
at which the last edge event took place.
492
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 19: GPTM Timer A Value (GPTMTAV), offset 0x050
When read, this register shows the current, free-running value of Timer A in all modes. Software
can use this value to determine the time elapsed between an interrupt and the ISR entry. When
written, the value written into this register is loaded into the GPTMTAR register on the next clock
cycle. In Input Edge-Count mode, bits 23:16 contain the upper 8 bits of the count.
When a GPTM is configured to one of the 32-bit modes, GPTMTAV appears as a 32-bit register
(the upper 16-bits correspond to the contents of the GPTM Timer B Value (GPTMTBV) register).
In a 16-bit mode, bits 15:0 contain the value of the counter and bits 23:16 contain the current,
free-running value of the prescaler, which is the upper 8 bits of the count. Bits 31:24 always read
as 0.
Note:
The GPTMTAV register cannot be written in Edge-Count mode.
GPTM Timer A Value (GPTMTAV)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x050
Type RW, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
7
6
5
4
3
2
1
0
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
TAV
Type
Reset
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
15
14
13
12
11
10
9
8
TAV
Type
Reset
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
Bit/Field
Name
Type
31:0
TAV
RW
RW
1
Reset
RW
1
Description
0xFFFF.FFFF GPTM Timer A Value
A read returns the current, free-running value of Timer A in all modes.
When written, the value written into this register is loaded into the
GPTMTAR register on the next clock cycle.
July 25, 2011
493
Texas Instruments-Production Data
General-Purpose Timers
Register 20: GPTM Timer B Value (GPTMTBV), offset 0x054
When read, this register shows the current, free-running value of Timer B in all modes. Software
can use this value to determine the time elapsed between an interrupt and the ISR entry. When
written, the value written into this register is loaded into the GPTMTBR register on the next clock
cycle. In Input Edge-Count mode, bits 23:16 contain the upper 8 bits of the count.
When a GPTM is configured to one of the 32-bit modes, the contents of bits 15:0 in this register are
loaded into the upper 16 bits of the GPTMTAV register. Reads from this register return the current
free-running value of Timer B. In a 16-bit mode, bits 15:0 contain the current, free-running value of
the counter and bits 23:16 contain the current, free-running value of the prescaler, which is the
upper 8 bits of the count. Bits 31:24 are reserved in both cases.
GPTM Timer B Value (GPTMTBV)
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
Offset 0x054
Type RW, reset 0x0000.FFFF
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RW
0
RW
0
RW
0
RW
0
RW
0
RW
0
RW
0
RW
0
RW
0
RW
0
RW
0
RW
0
RW
0
RW
0
RW
0
RW
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
RW
1
TBV
Type
Reset
TBV
Type
Reset
Bit/Field
Name
Type
31:0
TBV
RW
Reset
Description
0x0000.FFFF GPTM Timer B Value
A read returns the current, free-running value of Timer A in all modes.
When written, the value written into this register is loaded into the
GPTMTAR register on the next clock cycle.
494
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
11
Watchdog Timers
A watchdog timer can generate an interrupt or a reset when a time-out value is reached. The
watchdog timer is used to regain control when a system has failed due to a software error or due
to the failure of an external device to respond in the expected way. The LM3S1G58 microcontroller
has two Watchdog Timer Modules, one module is clocked by the system clock (Watchdog Timer
0) and the other is clocked by the PIOSC (Watchdog Timer 1). The two modules are identical except
that WDT1 is in a different clock domain, and therefore requires synchronizers. As a result, WDT1
has a bit defined in the Watchdog Timer Control (WDTCTL) register to indicate when a write to a
WDT1 register is complete. Software can use this bit to ensure that the previous access has
completed before starting the next access.
®
The Stellaris LM3S1G58 controller has two Watchdog Timer modules with the following features:
■ 32-bit down counter with a programmable load register
■ Separate watchdog clock with an enable
■ Programmable interrupt generation logic with interrupt masking
■ Lock register protection from runaway software
■ Reset generation logic with an enable/disable
■ User-enabled stalling when the microcontroller asserts the CPU Halt flag during debug
The Watchdog Timer can be configured to generate an interrupt to the controller on its first time-out,
and to generate a reset signal on its second time-out. Once the Watchdog Timer has been configured,
the lock register can be written to prevent the timer configuration from being inadvertently altered.
July 25, 2011
495
Texas Instruments-Production Data
Watchdog Timers
11.1
Block Diagram
Figure 11-1. WDT Module Block Diagram
WDTLOAD
Control / Clock /
Interrupt
Generation
WDTCTL
WDTICR
Interrupt
WDTRIS
32-Bit Down
Counter
WDTMIS
0x0000.0000
WDTLOCK
System Clock/
PIOSC
WDTTEST
Comparator
WDTVALUE
Identification Registers
11.2
WDTPCellID0
WDTPeriphID0
WDTPeriphID4
WDTPCellID1
WDTPeriphID1
WDTPeriphID5
WDTPCellID2
WDTPeriphID2
WDTPeriphID6
WDTPCellID3
WDTPeriphID3
WDTPeriphID7
Functional Description
The Watchdog Timer module generates the first time-out signal when the 32-bit counter reaches
the zero state after being enabled; enabling the counter also enables the watchdog timer interrupt.
After the first time-out event, the 32-bit counter is re-loaded with the value of the Watchdog Timer
Load (WDTLOAD) register, and the timer resumes counting down from that value. Once the
Watchdog Timer has been configured, the Watchdog Timer Lock (WDTLOCK) register is written,
which prevents the timer configuration from being inadvertently altered by software.
If the timer counts down to its zero state again before the first time-out interrupt is cleared, and the
reset signal has been enabled by setting the RESEN bit in the WDTCTL register, the Watchdog timer
asserts its reset signal to the system. If the interrupt is cleared before the 32-bit counter reaches its
second time-out, the 32-bit counter is loaded with the value in the WDTLOAD register, and counting
resumes from that value.
If WDTLOAD is written with a new value while the Watchdog Timer counter is counting, then the
counter is loaded with the new value and continues counting.
496
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Writing to WDTLOAD does not clear an active interrupt. An interrupt must be specifically cleared
by writing to the Watchdog Interrupt Clear (WDTICR) register.
The Watchdog module interrupt and reset generation can be enabled or disabled as required. When
the interrupt is re-enabled, the 32-bit counter is preloaded with the load register value and not its
last state.
11.2.1
Register Access Timing
Because the Watchdog Timer 1 module has an independent clocking domain, its registers must be
written with a timing gap between accesses. Software must guarantee that this delay is inserted
between back-to-back writes to WDT1 registers or between a write followed by a read to the registers.
The timing for back-to-back reads from the WDT1 module has no restrictions. The WRC bit in the
Watchdog Control (WDTCTL) register for WDT1 indicates that the required timing gap has elapsed.
This bit is cleared on a write operation and set once the write completes, indicating to software that
another write or read may be started safely. Software should poll WDTCTL for WRC=1 prior to
accessing another register. Note that WDT0 does not have this restriction as it runs off the system
clock.
11.3
Initialization and Configuration
To use the WDT, its peripheral clock must be enabled by setting the WDT bit in the RCGC0 register,
see page 237.
The Watchdog Timer is configured using the following sequence:
1. Load the WDTLOAD register with the desired timer load value.
2. If WDT1, wait for the WRC bit in the WDTCTL register to be set.
3. If the Watchdog is configured to trigger system resets, set the RESEN bit in the WDTCTL register.
4. If WDT1, wait for the WRC bit in the WDTCTL register to be set.
5. Set the INTEN bit in the WDTCTL register to enable the Watchdog and lock the control register.
If software requires that all of the watchdog registers are locked, the Watchdog Timer module can
be fully locked by writing any value to the WDTLOCK register. To unlock the Watchdog Timer, write
a value of 0x1ACC.E551.
11.4
Register Map
Table 11-1 on page 498 lists the Watchdog registers. The offset listed is a hexadecimal increment
to the register’s address, relative to the Watchdog Timer base address:
■ WDT0: 0x4000.0000
■ WDT1: 0x4000.1000
Note that the Watchdog Timer module clock must be enabled before the registers can be programmed
(see page 237).
July 25, 2011
497
Texas Instruments-Production Data
Watchdog Timers
Table 11-1. Watchdog Timers Register Map
Name
Type
Reset
0x000
WDTLOAD
R/W
0xFFFF.FFFF
Watchdog Load
499
0x004
WDTVALUE
RO
0xFFFF.FFFF
Watchdog Value
500
0x008
WDTCTL
R/W
0x0000.0000
(WDT0)
0x8000.0000
(WDT1)
Watchdog Control
501
0x00C
WDTICR
WO
-
Watchdog Interrupt Clear
503
0x010
WDTRIS
RO
0x0000.0000
Watchdog Raw Interrupt Status
504
0x014
WDTMIS
RO
0x0000.0000
Watchdog Masked Interrupt Status
505
0x418
WDTTEST
R/W
0x0000.0000
Watchdog Test
506
0xC00
WDTLOCK
R/W
0x0000.0000
Watchdog Lock
507
0xFD0
WDTPeriphID4
RO
0x0000.0000
Watchdog Peripheral Identification 4
508
0xFD4
WDTPeriphID5
RO
0x0000.0000
Watchdog Peripheral Identification 5
509
0xFD8
WDTPeriphID6
RO
0x0000.0000
Watchdog Peripheral Identification 6
510
0xFDC
WDTPeriphID7
RO
0x0000.0000
Watchdog Peripheral Identification 7
511
0xFE0
WDTPeriphID0
RO
0x0000.0005
Watchdog Peripheral Identification 0
512
0xFE4
WDTPeriphID1
RO
0x0000.0018
Watchdog Peripheral Identification 1
513
0xFE8
WDTPeriphID2
RO
0x0000.0018
Watchdog Peripheral Identification 2
514
0xFEC
WDTPeriphID3
RO
0x0000.0001
Watchdog Peripheral Identification 3
515
0xFF0
WDTPCellID0
RO
0x0000.000D
Watchdog PrimeCell Identification 0
516
0xFF4
WDTPCellID1
RO
0x0000.00F0
Watchdog PrimeCell Identification 1
517
0xFF8
WDTPCellID2
RO
0x0000.0006
Watchdog PrimeCell Identification 2
518
0xFFC
WDTPCellID3
RO
0x0000.00B1
Watchdog PrimeCell Identification 3
519
11.5
Description
See
page
Offset
Register Descriptions
The remainder of this section lists and describes the WDT registers, in numerical order by address
offset.
498
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 1: Watchdog Load (WDTLOAD), offset 0x000
This register is the 32-bit interval value used by the 32-bit counter. When this register is written, the
value is immediately loaded and the counter restarts counting down from the new value. If the
WDTLOAD register is loaded with 0x0000.0000, an interrupt is immediately generated.
Watchdog Load (WDTLOAD)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0x000
Type R/W, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
15
14
13
12
11
10
9
8
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
23
22
21
20
19
18
17
16
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
7
6
5
4
3
2
1
0
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
R/W
1
WDTLOAD
Type
Reset
WDTLOAD
Type
Reset
Bit/Field
Name
Type
31:0
WDTLOAD
R/W
Reset
R/W
1
Description
0xFFFF.FFFF Watchdog Load Value
July 25, 2011
499
Texas Instruments-Production Data
Watchdog Timers
Register 2: Watchdog Value (WDTVALUE), offset 0x004
This register contains the current count value of the timer.
Watchdog Value (WDTVALUE)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0x004
Type RO, reset 0xFFFF.FFFF
31
30
29
28
27
26
25
24
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
15
14
13
12
11
10
9
8
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
23
22
21
20
19
18
17
16
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
7
6
5
4
3
2
1
0
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
RO
1
WDTVALUE
Type
Reset
WDTVALUE
Type
Reset
Bit/Field
Name
Type
31:0
WDTVALUE
RO
Reset
RO
1
Description
0xFFFF.FFFF Watchdog Value
Current value of the 32-bit down counter.
500
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 3: Watchdog Control (WDTCTL), offset 0x008
This register is the watchdog control register. The watchdog timer can be configured to generate a
reset signal (on second time-out) or an interrupt on time-out.
When the watchdog interrupt has been enabled by setting the INTEN bit, all subsequent writes to
the INTEN bit are ignored. The only mechanism that can re-enable writes to this bit is a hardware
reset.
Important: Because the Watchdog Timer 1 module has an independent clocking domain, its
registers must be written with a timing gap between accesses. Software must guarantee
that this delay is inserted between back-to-back writes to WDT1 registers or between
a write followed by a read to the registers. The timing for back-to-back reads from the
WDT1 module has no restrictions. The WRC bit in the Watchdog Control (WDTCTL)
register for WDT1 indicates that the required timing gap has elapsed. This bit is cleared
on a write operation and set once the write completes, indicating to software that another
write or read may be started safely. Software should poll WDTCTL for WRC=1 prior to
accessing another register. Note that WDT0 does not have this restriction as it runs off
the system clock and therefore does not have a WRC bit.
Watchdog Control (WDTCTL)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0x008
Type R/W, reset 0x0000.0000 (WDT0) and 0x8000.0000 (WDT1)
31
30
29
28
27
26
25
24
22
21
20
19
18
17
16
RO
1
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RESEN
INTEN
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
WRC
Type
Reset
23
reserved
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31
WRC
RO
1
Description
Write Complete
The WRC values are defined as follows:
Value Description
0
A write access to one of the WDT1 registers is in progress.
1
A write access is not in progress, and WDT1 registers can be
read or written.
Note:
30:2
reserved
RO
0x000.000
This bit is reserved for WDT0 and has a reset value of 0.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
501
Texas Instruments-Production Data
Watchdog Timers
Bit/Field
Name
Type
Reset
1
RESEN
R/W
0
Description
Watchdog Reset Enable
The RESEN values are defined as follows:
Value Description
0
INTEN
R/W
0
0
Disabled.
1
Enable the Watchdog module reset output.
Watchdog Interrupt Enable
The INTEN values are defined as follows:
Value Description
0
Interrupt event disabled (once this bit is set, it can only be
cleared by a hardware reset).
1
Interrupt event enabled. Once enabled, all writes are ignored.
502
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 4: Watchdog Interrupt Clear (WDTICR), offset 0x00C
This register is the interrupt clear register. A write of any value to this register clears the Watchdog
interrupt and reloads the 32-bit counter from the WDTLOAD register. Value for a read or reset is
indeterminate.
Watchdog Interrupt Clear (WDTICR)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0x00C
Type WO, reset 31
30
29
28
27
26
25
24
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
15
14
13
12
11
10
9
8
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
23
22
21
20
19
18
17
16
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
7
6
5
4
3
2
1
0
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WO
-
WDTINTCLR
Type
Reset
WDTINTCLR
Type
Reset
Bit/Field
Name
Type
Reset
31:0
WDTINTCLR
WO
-
WO
-
Description
Watchdog Interrupt Clear
July 25, 2011
503
Texas Instruments-Production Data
Watchdog Timers
Register 5: Watchdog Raw Interrupt Status (WDTRIS), offset 0x010
This register is the raw interrupt status register. Watchdog interrupt events can be monitored via
this register if the controller interrupt is masked.
Watchdog Raw Interrupt Status (WDTRIS)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0x010
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:1
reserved
RO
0x0000.000
0
WDTRIS
RO
0
RO
0
WDTRIS
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog Raw Interrupt Status
Value Description
1
A watchdog time-out event has occurred.
0
The watchdog has not timed out.
504
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 6: Watchdog Masked Interrupt Status (WDTMIS), offset 0x014
This register is the masked interrupt status register. The value of this register is the logical AND of
the raw interrupt bit and the Watchdog interrupt enable bit.
Watchdog Masked Interrupt Status (WDTMIS)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0x014
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:1
reserved
RO
0x0000.000
0
WDTMIS
RO
0
RO
0
WDTMIS
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog Masked Interrupt Status
Value Description
1
A watchdog time-out event has been signalled to the interrupt
controller.
0
The watchdog has not timed out or the watchdog timer interrupt
is masked.
July 25, 2011
505
Texas Instruments-Production Data
Watchdog Timers
Register 7: Watchdog Test (WDTTEST), offset 0x418
This register provides user-enabled stalling when the microcontroller asserts the CPU halt flag
during debug.
Watchdog Test (WDTTEST)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0x418
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
STALL
Bit/Field
Name
Type
Reset
31:9
reserved
RO
0x0000.00
8
STALL
R/W
0
R/W
0
reserved
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog Stall Enable
Value Description
7:0
reserved
RO
0x00
1
If the microcontroller is stopped with a debugger, the watchdog
timer stops counting. Once the microcontroller is restarted, the
watchdog timer resumes counting.
0
The watchdog timer continues counting if the microcontroller is
stopped with a debugger.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
506
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 8: Watchdog Lock (WDTLOCK), offset 0xC00
Writing 0x1ACC.E551 to the WDTLOCK register enables write access to all other registers. Writing
any other value to the WDTLOCK register re-enables the locked state for register writes to all the
other registers. Reading the WDTLOCK register returns the lock status rather than the 32-bit value
written. Therefore, when write accesses are disabled, reading the WDTLOCK register returns
0x0000.0001 (when locked; otherwise, the returned value is 0x0000.0000 (unlocked)).
Watchdog Lock (WDTLOCK)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xC00
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
23
22
21
20
19
18
17
16
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
WDTLOCK
Type
Reset
WDTLOCK
Type
Reset
Bit/Field
Name
Type
31:0
WDTLOCK
R/W
Reset
R/W
0
Description
0x0000.0000 Watchdog Lock
A write of the value 0x1ACC.E551 unlocks the watchdog registers for
write access. A write of any other value reapplies the lock, preventing
any register updates.
A read of this register returns the following values:
Value
Description
0x0000.0001 Locked
0x0000.0000 Unlocked
July 25, 2011
507
Texas Instruments-Production Data
Watchdog Timers
Register 9: Watchdog Peripheral Identification 4 (WDTPeriphID4), offset 0xFD0
The WDTPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog Peripheral Identification 4 (WDTPeriphID4)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFD0
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID4
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID4
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
WDT Peripheral ID Register [7:0]
508
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 10: Watchdog Peripheral Identification 5 (WDTPeriphID5), offset
0xFD4
The WDTPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog Peripheral Identification 5 (WDTPeriphID5)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFD4
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
PID5
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID5
RO
0x00
RO
0
RO
0
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
WDT Peripheral ID Register [15:8]
July 25, 2011
509
Texas Instruments-Production Data
Watchdog Timers
Register 11: Watchdog Peripheral Identification 6 (WDTPeriphID6), offset
0xFD8
The WDTPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog Peripheral Identification 6 (WDTPeriphID6)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFD8
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
PID6
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID6
RO
0x00
RO
0
RO
0
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
WDT Peripheral ID Register [23:16]
510
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 12: Watchdog Peripheral Identification 7 (WDTPeriphID7), offset
0xFDC
The WDTPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog Peripheral Identification 7 (WDTPeriphID7)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFDC
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
PID7
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID7
RO
0x00
RO
0
RO
0
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
WDT Peripheral ID Register [31:24]
July 25, 2011
511
Texas Instruments-Production Data
Watchdog Timers
Register 13: Watchdog Peripheral Identification 0 (WDTPeriphID0), offset
0xFE0
The WDTPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog Peripheral Identification 0 (WDTPeriphID0)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFE0
Type RO, reset 0x0000.0005
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
RO
0
RO
1
RO
0
RO
1
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
PID0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID0
RO
0x05
RO
0
RO
0
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog Peripheral ID Register [7:0]
512
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 14: Watchdog Peripheral Identification 1 (WDTPeriphID1), offset
0xFE4
The WDTPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog Peripheral Identification 1 (WDTPeriphID1)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFE4
Type RO, reset 0x0000.0018
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
RO
1
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
PID1
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID1
RO
0x18
RO
0
RO
0
RO
0
RO
0
RO
1
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog Peripheral ID Register [15:8]
July 25, 2011
513
Texas Instruments-Production Data
Watchdog Timers
Register 15: Watchdog Peripheral Identification 2 (WDTPeriphID2), offset
0xFE8
The WDTPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog Peripheral Identification 2 (WDTPeriphID2)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFE8
Type RO, reset 0x0000.0018
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
RO
1
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
PID2
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID2
RO
0x18
RO
0
RO
0
RO
0
RO
0
RO
1
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog Peripheral ID Register [23:16]
514
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 16: Watchdog Peripheral Identification 3 (WDTPeriphID3), offset
0xFEC
The WDTPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog Peripheral Identification 3 (WDTPeriphID3)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFEC
Type RO, reset 0x0000.0001
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
3
2
1
0
RO
0
RO
0
RO
0
RO
1
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
PID3
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID3
RO
0x01
RO
0
RO
0
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog Peripheral ID Register [31:24]
July 25, 2011
515
Texas Instruments-Production Data
Watchdog Timers
Register 17: Watchdog PrimeCell Identification 0 (WDTPCellID0), offset 0xFF0
The WDTPCellIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog PrimeCell Identification 0 (WDTPCellID0)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFF0
Type RO, reset 0x0000.000D
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID0
RO
0x0D
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog PrimeCell ID Register [7:0]
516
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 18: Watchdog PrimeCell Identification 1 (WDTPCellID1), offset 0xFF4
The WDTPCellIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog PrimeCell Identification 1 (WDTPCellID1)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFF4
Type RO, reset 0x0000.00F0
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
1
RO
1
RO
1
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
CID1
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID1
RO
0xF0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog PrimeCell ID Register [15:8]
July 25, 2011
517
Texas Instruments-Production Data
Watchdog Timers
Register 19: Watchdog PrimeCell Identification 2 (WDTPCellID2), offset 0xFF8
The WDTPCellIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog PrimeCell Identification 2 (WDTPCellID2)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFF8
Type RO, reset 0x0000.0006
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
0
reserved
Type
Reset
reserved
Type
Reset
CID2
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID2
RO
0x06
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog PrimeCell ID Register [23:16]
518
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 20: Watchdog PrimeCell Identification 3 (WDTPCellID3 ), offset 0xFFC
The WDTPCellIDn registers are hard-coded and the fields within the register determine the reset
value.
Watchdog PrimeCell Identification 3 (WDTPCellID3)
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
Offset 0xFFC
Type RO, reset 0x0000.00B1
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
0
RO
1
RO
1
RO
0
RO
0
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID3
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID3
RO
0xB1
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Watchdog PrimeCell ID Register [31:24]
July 25, 2011
519
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
12
Analog-to-Digital Converter (ADC)
An analog-to-digital converter (ADC) is a peripheral that converts a continuous analog voltage to a
discrete digital number. Two identical converter modules are included, which share 16 input channels.
®
The Stellaris ADC module features 12-bit conversion resolution and supports 16 input channels,
plus an internal temperature sensor. Each ADC module contains four programmable sequencers
allowing the sampling of multiple analog input sources without controller intervention. Each sample
sequencer provides flexible programming with fully configurable input source, trigger events, interrupt
generation, and sequencer priority. A digital comparator function is included which allows the
conversion value to be diverted to a digital comparator module. Each ADC module provides eight
digital comparators. Each digital comparator evaluates the ADC conversion value against its two
user-defined values to determine the operational range of the signal. The trigger source for ADC0
and ADC1 may be independent or the two ADC modules may operate from the same trigger source
and operate on the same or different inputs. A phase shifter can delay the start of sampling by a
specified phase angle. When using both ADC modules, it is possible to configure the converters to
start the conversions coincidentally or within a relative phase from each other, see “Sample Phase
Control” on page 525.
The Stellaris LM3S1G58 microcontroller provides two ADC modules with each having the following
features:
■ 16 shared analog input channels
■ 12-bit precision ADC with an accurate 10-bit data compatibility mode
■ Single-ended and differential-input configurations
■ On-chip internal temperature sensor
■ Maximum sample rate of one million samples/second
■ Optional phase shift in sample time programmable from 22.5º to 337.5º
■ Four programmable sample conversion sequencers from one to eight entries long, with
corresponding conversion result FIFOs
■ Flexible trigger control
– Controller (software)
– Timers
– GPIO
■ Hardware averaging of up to 64 samples
■ Digital comparison unit providing eight digital comparators
■ Converter uses an internal 3-V reference or an external reference
■ Power and ground for the analog circuitry is separate from the digital power and ground
■ Efficient transfers using Micro Direct Memory Access Controller (µDMA)
520
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
– Dedicated channel for each sample sequencer
– ADC module uses burst requests for DMA
12.1
Block Diagram
The Stellaris microcontroller contains two identical Analog-to-Digital Converter modules. These two
modules, ADC0 and ADC1, share the same 16 analog input channels. Each ADC module operates
independently and can therefore execute different sample sequences, sample any of the analog
input channels at any time, and generate different interrupts and triggers. Figure 12-1 on page 521
shows how the two modules are connected to analog inputs and the system bus.
Figure 12-1. Implementation of Two ADC Blocks
Input
Channels
ADC 0
Triggers
Interrupts/
Triggers
ADC 1
Interrupts/
Triggers
Figure 12-2 on page 521 provides details on the internal configuration of the ADC controls and data
registers.
Figure 12-2. ADC Module Block Diagram
Internal
Voltage Ref
Trigger Events
Comparator
GPIO (PB4)
Timer
PWM
Comparator
GPIO (PB4)
Timer
PWM
Comparator
GPIO (PB4)
Timer
PWM
Comparator
GPIO (PB4)
Timer
PWM
External
Voltage Ref
(VREFA)
SS3
Sample
Sequencer 0
Control/Status
ADCSSMUX0
ADCACTSS
ADCSSCTL0
ADCOSTAT
ADCSSFSTAT0
Analog Inputs
(AINx)
ADCUSTAT
SS2
ADCSSPRI
ADCCTL
Sample
Sequencer 1
ADCSPC
ADCSSMUX1
ADCSSCTL1
SS1
Hardware Averager
ADCSSFSTAT1
ADCSAC
Sample
Sequencer 2
SS0
ADCSSMUX2
ADCSSCTL2
ADCSSFSTAT2
ADCEMUX
ADCPSSI
SS0 Interrupt
SS1 Interrupt
SS2 Interrupt
SS3 Interrupt
Analog-to-Digital
Converter
Interrupt Control
Sample
Sequencer 3
ADCIM
ADCSSMUX3
ADCRIS
ADCSSCTL3
ADCISC
ADCSSFSTAT3
FIFO Block
Digital
Comparator
ADCSSOPn
ADCSSFIFO0
ADCSSDCn
ADCSSFIFO1
ADCDCCTLn
ADCSSFIFO2
ADCDCCMPn
ADCSSFIFO3
ADCDCRIC
ADCDCISC
DC Interrupts
PWM Trigger
July 25, 2011
521
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
12.2
Signal Description
The following table lists the external signals of the ADC module and describes the function of each.
The ADC signals are analog functions for some GPIO signals. The column in the table below titled
"Pin Mux/Pin Assignment" lists the GPIO pin placement for the ADC signals. The AINx and VREFA
analog signals are not 5-V tolerant and go through an isolation circuit before reaching their circuitry.
These signals are configured by clearing the corresponding DEN bit in the GPIO Digital Enable
(GPIODEN) register and setting the corresponding AMSEL bit in the GPIO Analog Mode Select
(GPIOAMSEL) register. For more information on configuring GPIOs, see “General-Purpose
Input/Outputs (GPIOs)” on page 395.
Table 12-1. Signals for ADC (100LQFP)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
AIN0
1
PE7
I
Analog
Analog-to-digital converter input 0.
AIN1
2
PE6
I
Analog
Analog-to-digital converter input 1.
AIN2
5
PE5
I
Analog
Analog-to-digital converter input 2.
AIN3
6
PE4
I
Analog
Analog-to-digital converter input 3.
AIN4
100
PD7
I
Analog
Analog-to-digital converter input 4.
AIN5
99
PD6
I
Analog
Analog-to-digital converter input 5.
AIN6
96
PD5
I
Analog
Analog-to-digital converter input 6.
AIN7
95
PD4
I
Analog
Analog-to-digital converter input 7.
AIN8
75
PE3
I
Analog
Analog-to-digital converter input 8.
AIN9
74
PE2
I
Analog
Analog-to-digital converter input 9.
AIN10
92
PB4
I
Analog
Analog-to-digital converter input 10.
AIN11
91
PB5
I
Analog
Analog-to-digital converter input 11.
AIN12
13
PD3
I
Analog
Analog-to-digital converter input 12.
AIN13
12
PD2
I
Analog
Analog-to-digital converter input 13.
AIN14
11
PD1
I
Analog
Analog-to-digital converter input 14.
AIN15
10
PD0
I
Analog
Analog-to-digital converter input 15.
VREFA
90
PB6
I
Analog
This input provides a reference voltage used to
specify the input voltage at which the ADC converts
to a maximum value. In other words, the voltage
that is applied to VREFA is the voltage with which
an AINn signal is converted to 4095. The VREFA
input is limited to the range specified in Table
19-22 on page 797.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 12-2. Signals for ADC (108BGA)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
AIN0
B1
PE7
I
Analog
Analog-to-digital converter input 0.
AIN1
A1
PE6
I
Analog
Analog-to-digital converter input 1.
AIN2
B3
PE5
I
Analog
Analog-to-digital converter input 2.
AIN3
B2
PE4
I
Analog
Analog-to-digital converter input 3.
AIN4
A2
PD7
I
Analog
Analog-to-digital converter input 4.
AIN5
A3
PD6
I
Analog
Analog-to-digital converter input 5.
522
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 12-2. Signals for ADC (108BGA) (continued)
Pin Name
AIN6
Pin Number Pin Mux / Pin
Assignment
B4
PD5
a
Pin Type
Buffer Type
I
Analog
Description
Analog-to-digital converter input 6.
AIN7
A4
PD4
I
Analog
Analog-to-digital converter input 7.
AIN8
A12
PE3
I
Analog
Analog-to-digital converter input 8.
AIN9
B11
PE2
I
Analog
Analog-to-digital converter input 9.
AIN10
A6
PB4
I
Analog
Analog-to-digital converter input 10.
AIN11
B7
PB5
I
Analog
Analog-to-digital converter input 11.
AIN12
H1
PD3
I
Analog
Analog-to-digital converter input 12.
AIN13
H2
PD2
I
Analog
Analog-to-digital converter input 13.
AIN14
G2
PD1
I
Analog
Analog-to-digital converter input 14.
AIN15
G1
PD0
I
Analog
Analog-to-digital converter input 15.
VREFA
A7
PB6
I
Analog
This input provides a reference voltage used to
specify the input voltage at which the ADC converts
to a maximum value. In other words, the voltage
that is applied to VREFA is the voltage with which
an AINn signal is converted to 4095. The VREFA
input is limited to the range specified in Table
19-22 on page 797.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
12.3
Functional Description
The Stellaris ADC collects sample data by using a programmable sequence-based approach instead
of the traditional single or double-sampling approaches found on many ADC modules. Each sample
sequence is a fully programmed series of consecutive (back-to-back) samples, allowing the ADC
to collect data from multiple input sources without having to be re-configured or serviced by the
processor. The programming of each sample in the sample sequence includes parameters such as
the input source and mode (differential versus single-ended input), interrupt generation on sample
completion, and the indicator for the last sample in the sequence. In addition, the μDMA can be
used to more efficiently move data from the sample sequencers without CPU intervention.
12.3.1
Sample Sequencers
The sampling control and data capture is handled by the sample sequencers. All of the sequencers
are identical in implementation except for the number of samples that can be captured and the depth
of the FIFO. Table 12-3 on page 523 shows the maximum number of samples that each sequencer
can capture and its corresponding FIFO depth. Each sample that is captured is stored in the FIFO.
In this implementation, each FIFO entry is a 32-bit word, with the lower 12 bits containing the
conversion result.
Table 12-3. Samples and FIFO Depth of Sequencers
Sequencer
Number of Samples
Depth of FIFO
SS3
1
1
SS2
4
4
SS1
4
4
SS0
8
8
July 25, 2011
523
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
For a given sample sequence, each sample is defined by bit fields in the ADC Sample Sequence
Input Multiplexer Select (ADCSSMUXn) and ADC Sample Sequence Control (ADCSSCTLn)
registers, where "n" corresponds to the sequence number. The ADCSSMUXn fields select the input
pin, while the ADCSSCTLn fields contain the sample control bits corresponding to parameters such
as temperature sensor selection, interrupt enable, end of sequence, and differential input mode.
Sample sequencers are enabled by setting the respective ASENn bit in the ADC Active Sample
Sequencer (ADCACTSS) register and should be configured before being enabled. Sampling is
then initiated by setting the SSn bit in the ADC Processor Sample Sequence Initiate (ADCPSSI)
register. In addition, sample sequences may be initiated on multiple ADC modules simultaneously
using the GSYNC and SYNCWAIT bits in the ADCPSSI register during the configuration of each ADC
module. For more information on using these bits, refer to page 561.
When configuring a sample sequence, multiple uses of the same input pin within the same sequence
are allowed. In the ADCSSCTLn register, the IEn bits can be set for any combination of samples,
allowing interrupts to be generated after every sample in the sequence if necessary. Also, the END
bit can be set at any point within a sample sequence. For example, if Sequencer 0 is used, the END
bit can be set in the nibble associated with the fifth sample, allowing Sequencer 0 to complete
execution of the sample sequence after the fifth sample.
After a sample sequence completes execution, the result data can be retrieved from the ADC
Sample Sequence Result FIFO (ADCSSFIFOn) registers. The FIFOs are simple circular buffers
that read a single address to "pop" result data. For software debug purposes, the positions of the
FIFO head and tail pointers are visible in the ADC Sample Sequence FIFO Status (ADCSSFSTATn)
registers along with FULL and EMPTY status flags. If a write is attempted when the FIFO is full, the
write does not occur and an overflow condition is indicated. Overflow and underflow conditions are
monitored using the ADCOSTAT and ADCUSTAT registers.
12.3.2
Module Control
Outside of the sample sequencers, the remainder of the control logic is responsible for tasks such
as:
■ Interrupt generation
■ DMA operation
■ Sequence prioritization
■ Trigger configuration
■ Comparator configuration
■ External voltage reference
■ Sample phase control
Most of the ADC control logic runs at the ADC clock rate of 14-18 MHz. The internal ADC divider
is configured for 16-MHz operation automatically by hardware when the system XTAL is selected.
12.3.2.1
Interrupts
The register configurations of the sample sequencers and digital comparators dictate which events
generate raw interrupts, but do not have control over whether the interrupt is actually sent to the
interrupt controller. The ADC module's interrupt signals are controlled by the state of the MASK bits
in the ADC Interrupt Mask (ADCIM) register. Interrupt status can be viewed at two locations: the
ADC Raw Interrupt Status (ADCRIS) register, which shows the raw status of the various interrupt
524
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
signals; and the ADC Interrupt Status and Clear (ADCISC) register, which shows active interrupts
that are enabled by the ADCIM register. Sequencer interrupts are cleared by writing a 1 to the
corresponding IN bit in ADCISC. Digital comparator interrupts are cleared by writing a 1 to the ADC
Digital Comparator Interrupt Status and Clear (ADCDCISC) register.
12.3.2.2
DMA Operation
DMA may be used to increase efficiency by allowing each sample sequencer to operate independently
and transfer data without processor intervention or reconfiguration. The ADC module provides a
request signal from each sample sequencer to the associated dedicated channel of the μDMA
controller. The ADC does not support single transfer requests. A burst transfer request is asserted
when the interrupt bit for the sample sequence is set (IE bit in the ADCSSCTLn register is set).
The arbitration size of the μDMA transfer must be a power of 2, and the associated IE bits in the
ADDSSCTLn register must be set. For example, if the μDMA channel of SS0 has an arbitration
size of four, the IE3 bit (4th sample) and the IE7 bit (8th sample) must be set. Thus the μDMA
request occurs every time 4 samples have been acquired. No other special steps are needed to
enable the ADC module for μDMA operation.
Refer to the “Micro Direct Memory Access (μDMA)” on page 335 for more details about programming
the μDMA controller.
12.3.2.3
Prioritization
When sampling events (triggers) happen concurrently, they are prioritized for processing by the
values in the ADC Sample Sequencer Priority (ADCSSPRI) register. Valid priority values are in
the range of 0-3, with 0 being the highest priority and 3 being the lowest. Multiple active sample
sequencer units with the same priority do not provide consistent results, so software must ensure
that all active sample sequencer units have a unique priority value.
12.3.2.4
Sampling Events
Sample triggering for each sample sequencer is defined in the ADC Event Multiplexer Select
(ADCEMUX) register. Trigger sources include processor (default), an external signal on GPIO PB4,
a GP Timer, and continuous sampling. The processor triggers sampling by setting the SSx bits in
the ADC Processor Sample Sequence Initiate (ADCPSSI) register.
Care must be taken when using the continuous sampling trigger. If a sequencer's priority is too high,
it is possible to starve other lower priority sequencers. Generally, a sample sequencer using
continuous sampling should be set to the lowest priority. Continuous sampling can be used with a
digital comparator to cause an interrupt when a particular voltage is seen on an input.
12.3.2.5
Sample Phase Control
The trigger source for ADC0 and ADC1 may be independent or the two ADC modules may operate
from the same trigger source and operate on the same or different inputs. If the converters are
running at the same sample rate, they may be configured to start the conversions coincidentally or
with one of 15 different discrete phases relative to each other. The sample time can be delayed
from the standard sampling time in 22.5° increments up to 337.5º using the ADC Sample Phase
Control (ADCSPC) register. Figure 12-3 on page 526 shows an example of various phase
relationships at a 1 Msps rate.
July 25, 2011
525
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Figure 12-3. ADC Sample Phases
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
ADC Sample Clock
PHASE 0x0 (0.0°)
PHASE 0x1 (22.5°)
.
.
.
.
.
.
.
.
.
.
.
.
PHASE 0xE (315.0°)
PHASE 0xF (337.5°)
This feature can be used to double the sampling rate of an input. Both ADC module 0 and ADC
module 1 can be programmed to sample the same input. ADC module 0 could sample at the standard
position (the PHASE field in the ADCSPC register is 0x0). ADC module 1 can be configured to sample
at 180 (PHASE = 0x8). The two modules can be be synchronized using the GSYNC and SYNCWAIT
bits in the ADC Processor Sample Sequence Initiate (ADCPSSI) register. Software could then
combine the results from the two modules to create a sample rate of two million samples/second
at 16 MHz as shown in Figure 12-4 on page 526.
Figure 12-4. Doubling the ADC Sample Rate
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
ADC Sample Clock
GSYNC
ADC 0 PHASE 0x0 (0.0°)
ADC 1 PHASE 0x8 (180.0°)
Using the ADCSPC register, ADC0 and ADC1 may provide a number of interesting applications:
■ Coincident sampling of different signals. The sample sequence steps run coincidently in both
converters.
– ADC Module 0, ADCSPC = 0x0, sampling AIN0
– ADC Module 1, ADCSPC = 0x0, sampling AIN1
■ Skewed sampling of the same signal. The sample sequence steps are 1/2 of an ADC clock (500
µs for a 1Ms/s ADC) out of phase with each other. This configuration doubles the conversion
bandwidth of a single input when software combines the results as shown in Figure
12-5 on page 527.
– ADC Module 0, ADCSPC = 0x0, sampling AIN0
– ADC Module 1, ADCSPC = 0x8, sampling AIN0
526
July 25, 2011
Texas Instruments-Production Data
18
®
Stellaris LM3S1G58 Microcontroller
Figure 12-5. Skewed Sampling
ADC0
ADC1
12.3.3
S1
S2
S1
S3
S2
S4
S3
S5
S4
S6
S5
S7
S6
S8
S7
S8
Hardware Sample Averaging Circuit
Higher precision results can be generated using the hardware averaging circuit, however, the
improved results are at the cost of throughput. Up to 64 samples can be accumulated and averaged
to form a single data entry in the sequencer FIFO. Throughput is decreased proportionally to the
number of samples in the averaging calculation. For example, if the averaging circuit is configured
to average 16 samples, the throughput is decreased by a factor of 16.
By default the averaging circuit is off, and all data from the converter passes through to the sequencer
FIFO. The averaging hardware is controlled by the ADC Sample Averaging Control (ADCSAC)
register (see page 563). A single averaging circuit has been implemented, thus all input channels
receive the same amount of averaging whether they are single-ended or differential.
Figure 12-6 on page 528 shows an example in which the ADCSAC register is set to 0x2 for 4x
hardware oversampling and the IE1 bit is set for the sample sequence, resulting in an interrupt
after the second averaged value is stored in the FIFO.
July 25, 2011
527
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Figure 12-6. Sample Averaging Example
A+B+C+D
4
A+B+C+D
4
INT
12.3.4
Analog-to-Digital Converter
The Analog-to-Digital Converter (ADC) module uses a Successive Approximation Register (SAR)
architecture to deliver a 12-bit, low-power, high-precision conversion value. The ADC defaults to a
10-bit conversion result, providing backwards compatibility with previous generations of Stellaris
microcontrollers. To enable 12-bit resolution, set the RES bit in the ADC Control (ADCCTL) register.
The successive-approximation algorithm uses a current mode D/A converter to achieve lower settling
time, resulting in higher conversion speeds for the A/D converter. In addition, built-in sample-and-hold
circuitry with offset-calibration circuitry improves conversion accuracy. The ADC must be run from
the PLL or a 14- to 18-MHz clock source.
The ADC operates from both the 3.3-V analog and 1.2-V digital power supplies. The ADC clock can
be configured to reduce power consumption when ADC conversions are not required (see “System
Control” on page 182). The analog inputs are connected to the ADC through custom pads and
specially balanced input paths to minimize the distortion on the inputs. Detailed information on the
ADC power supplies and analog inputs can be found in “Analog-to-Digital Converter
(ADC)” on page 796.
12.3.4.1
Internal Voltage Reference
The band-gap circuitry generates an internal 3.0 V reference that can be used by the ADC to produce
a conversion value from the selected analog input. The range of this conversion value is from 0x000
to 0xFFF in 12-bit mode, or 0x3FF in 10-bit mode. In single-ended-input mode, the 0x000 value
corresponds to an analog input voltage of 0.0 V; the 0xFFF in 12-bit mode, or 0x3FF in 10-bit mode
value corresponds to an analog input voltage of 3.0 V. This configuration results in a resolution of
approximately 0.7 mV in 12-bit mode and 2.9 mV per ADC code in 10-bit mode. While the analog
input pads can handle voltages beyond this range, the ADC conversions saturate in under-voltage
and over-voltage cases. Figure 12-7 on page 529 shows the ADC conversion function of the analog
inputs.
528
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 12-7. Internal Voltage Conversion Result
12-bit/
10-bit
0xFFF/
0x3FF
0xBFF/
0x2FF
0x7FF/
0x1FF
0x3FF/
0x0FF
0.00 V
0.75 V
1.50 V
2.25 V
3.00 V
VIN
- Input Saturation
12.3.4.2
External Voltage Reference
The ADC can use an external voltage reference to produce the conversion value from the selected
analog input by configuring the VREF field in the ADC Control (ADCCTL) register. The VREF field
specifies whether to use the internal, an external reference in the 3.0 V range, or an external reference
in the 1.0 V range. While the range of the conversion value remains the same (0x000 to 0xFFF or
0x3FF), the analog voltage associated with the 0xFFF or 0x3FF value corresponds to the value of
the voltage when using the 3.0-V setting and three times the voltage when using the 1.0-V setting,
resulting in a smaller voltage resolution per ADC code. Ground is always used as the reference
level for the minimum conversion value. Analog input voltages above the external voltage reference
saturate to 0xFFF or 0x3FF while those below 0.0 V continue to saturate at 0x000. The VREFA
specification defines the useful range for the external voltage reference, see Table 19-22 on page 797.
Care must be taken to supply a reference voltage of acceptable quality.
Figure 12-8 on page 530 shows the ADC conversion function of the analog inputs when using anthe
3.0-V setting on the external voltage reference. Figure 12-9 on page 530 shows the ADC conversion
function when using the 1.0-V setting on the external voltage reference.
The external voltage reference can be more accurate than the internal reference by using a
high-precision source or trimming the source.
July 25, 2011
529
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Figure 12-8. External Voltage Conversion Result with 3.0-V Setting
12-bit/
10-bit
0xFFF/
0x3FF
0xBFF/
0x2FF
0x7FF/
0x1FF
0x3FF/
0x0FF
0.00 V
½ VREFA
VREFA
VDD
VIN
- Input Saturation
Figure 12-9. External Voltage Conversion Result with 1.0-V Setting
12-bit/
10-bit
0xFFF/
0x3FF
0xBFF/
0x2FF
0x7FF/
0x1FF
0x3FF/
0x0FF
0.00 V
1.5*VREFA
3*VREFA
VDD
VIN
- Input Saturation
530
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
12.3.5
Differential Sampling
In addition to traditional single-ended sampling, the ADC module supports differential sampling of
two analog input channels. To enable differential sampling, software must set the Dn bit in the
ADCSSCTL0n register in a step's configuration nibble.
When a sequence step is configured for differential sampling, the input pair to sample must be
configured in the ADCSSMUXn register. Differential pair 0 samples analog inputs 0 and 1; differential
pair 1 samples analog inputs 2 and 3; and so on (see Table 12-4 on page 531). The ADC does not
support other differential pairings such as analog input 0 with analog input 3.
Table 12-4. Differential Sampling Pairs
Differential Pair
Analog Inputs
0
0 and 1
1
2 and 3
2
4 and 5
3
6 and 7
4
8 and 9
5
10 and 11
6
12 and 13
7
14 and 15
The voltage sampled in differential mode is the difference between the odd and even channels:
∆V (differential voltage) = VIN_EVEN (even channel) – VIN_ODD (odd channel), therefore:
■ If ∆V = 0, then the conversion result = 0x1FF for 10-bit and 0x7FF for 12-bit
■ If ∆V > 0, then the conversion result > 0x1FF (range is 0x1FF–0x3FF) for 10-bit and > 0x7FF
(range is 0x7FF - 0xFFF) for 12-bit
■ If ∆V < 0, then the conversion result < 0x1FF (range is 0–0x1FF) for 10-bit and < 0x7FF (range
is 0 - 0x7FF) for 12-bit
The differential pairs assign polarities to the analog inputs: the even-numbered input is always
positive, and the odd-numbered input is always negative. In order for a valid conversion result to
appear, the negative input must be in the range of ± 1.5 V of the positive input. If an analog input
is greater than 3 V or less than 0 V (the valid range for analog inputs), the input voltage is clipped,
meaning it appears as either 3 V or 0 V , respectively, to the ADC.
Figure 12-10 on page 532 shows an example of the negative input centered at 1.5 V. In this
configuration, the differential range spans from -1.5 V to 1.5 V. Figure 12-11 on page 532 shows an
example where the negative input is centered at 0.75 V, meaning inputs on the positive input saturate
past a differential voltage of -0.75 V because the input voltage is less than 0 V. Figure
12-12 on page 533 shows an example of the negative input centered at 2.25 V, where inputs on the
positive channel saturate past a differential voltage of 0.75 V since the input voltage would be greater
than 3 V.
July 25, 2011
531
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Figure 12-10. Differential Sampling Range, VIN_ODD = 1.5 V
12-bit
10-bit
0xFFF
0x3FF
0x7FF
0x1FF
0
-1.5
1.5
0
3.0 VIN_EVEN
1.5 DV
VIN_ODD = 1.5 V
- Input Saturation
Figure 12-11. Differential Sampling Range, VIN_ODD = 0.75 V
-1.5 V
0V
-0.75 V
12-bit
10-bit
0xFFF
0x3FF
0x7FF
0x1FF
0x3FF
0x0FF
+0.75 V
+2.25 V
+1.5 V
VIN_EVEN
DV
- Input Saturation
532
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 12-12. Differential Sampling Range, VIN_ODD = 2.25 V
0.75 V
-1.5 V
12-bit
10-bit
0xFFF
0x3FF
0xBFF
0x2FF
0x7FF
0x1FF
2.25 V
3.0 V
0.75 V
1.5 V
VIN_EVEN
DV
- Input Saturation
12.3.6
Internal Temperature Sensor
The temperature sensor serves two primary purposes: 1) to notify the system that internal temperature
is too high or low for reliable operation and 2) to provide temperature measurements for calibration
of the Hibernate module RTC trim value.
The temperature sensor does not have a separate enable, because it also contains the bandgap
reference and must always be enabled. The reference is supplied to other analog modules; not just
the ADC. In addition, the temperature sensor has a second power-down input in the 3.3 V domain
which provides control by the Hibernation module.
The internal temperature sensor provides an analog temperature reading as well as a reference
voltage. This reference voltage, SENSO, is given by the following equation:
SENSO = 2.7 - ((T + 55) / 75)
This relation is shown in Figure 12-13 on page 534.
July 25, 2011
533
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Figure 12-13. Internal Temperature Sensor Characteristic
Sensor = 2.7 V – (T+55)
75
Sensor
2.7 V
1.633 V
0.3 V
-55° C
25° C
125° C Temp
The temperature sensor reading can be sampled in a sample sequence by setting the TSn bit in
the ADCSSCTLn register. The temperature reading from the temperature sensor can also be given
as a function of the ADC value. The following formula calculates temperature (in ℃) based on the
ADC reading:
Temperature = 147.5 - ((225 × ADC) / 4095)
12.3.7
Digital Comparator Unit
An ADC is commonly used to sample an external signal and to monitor its value to ensure that it
remains in a given range. To automate this monitoring procedure and reduce the amount of processor
overhead that is required, each module provides eight digital comparators. Conversions from the
ADC that are sent to the digital comparators are compared against the user programmable limits
in the ADC Digital Comparator Range (ADCDCCMPn) registers. If the observed signal moves
out of the acceptable range, a processor interrupt can be generated. The digital comparators four
operational modes (Once, Always, Hysteresis Once, Hysteresis Always) can be applied to three
separate regions (low band, mid band, high band) as defined by the user.
12.3.7.1
Output Functions
ADC conversions can either be stored in the ADC Sample Sequence FIFOs or compared using the
digital comparator resources as defined by the SnDCOP bits in the ADC Sample Sequence n
Operation (ADCSSOPn) register. These selected ADC conversions are used by their respective
digital comparator to monitor the external signal. Each comparator has two possible output functions:
processor interrupts and triggers.
534
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Each function has its own state machine to track the monitored signal. Even though the interrupt
and trigger functions can be enabled individually or both at the same time, the same conversion
data is used by each function to determine if the right conditions have been met to assert the
associated output.
Interrupts
The digital comparator interrupt function is enabled by setting the CIE bit in the ADC Digital
Comparator Control (ADCDCCTLn) register. This bit enables the interrupt function state machine
to start monitoring the incoming ADC conversions. When the appropriate set of conditions is met,
and the DCONSSx bit is set in the ADCIM register, an interrupt is sent to the interrupt controller.
12.3.7.2
Operational Modes
Four operational modes are provided to support a broad range of applications and multiple possible
signaling requirements: Always, Once, Hysteresis Always, and Hysteresis Once. The operational
mode is selected using the CIM field in the ADCDCCTLn register.
Always Mode
In the Always operational mode, the associated interrupt or trigger is asserted whenever the ADC
conversion value meets its comparison criteria. The result is a string of assertions on the interrupt
or trigger while the conversions are within the appropriate range.
Once Mode
In the Once operational mode, the associated interrupt or trigger is asserted whenever the ADC
conversion value meets its comparison criteria, and the previous ADC conversion value did not.
The result is a single assertion of the interrupt or trigger when the conversions are within the
appropriate range.
Hysteresis-Always Mode
The Hysteresis-Always operational mode can only be used in conjunction with the low-band or
high-band regions because the mid-band region must be crossed and the opposite region entered
to clear the hysteresis condition. In the Hysteresis-Always mode, the associated interrupt or trigger
is asserted in the following cases: 1) the ADC conversion value meets its comparison criteria or 2)
a previous ADC conversion value has met the comparison criteria, and the hysteresis condition has
not been cleared by entering the opposite region. The result is a string of assertions on the interrupt
or trigger that continue until the opposite region is entered.
Hysteresis-Once Mode
The Hysteresis-Once operational mode can only be used in conjunction with the low-band or
high-band regions because the mid-band region must be crossed and the opposite region entered
to clear the hysteresis condition. In the Hysteresis-Once mode, the associated interrupt or trigger
is asserted only when the ADC conversion value meets its comparison criteria, the hysteresis
condition is clear, and the previous ADC conversion did not meet the comparison criteria. The result
is a single assertion on the interrupt or trigger.
12.3.7.3
Function Ranges
The two comparison values, COMP0 and COMP1, in the ADC Digital Comparator Range
(ADCDCCMPn) register effectively break the conversion area into three distinct regions. These
regions are referred to as the low-band (less than or equal to COMP0), mid-band (greater than COMP0
but less than or equal to COMP1), and high-band (greater than COMP1) regions. COMP0 and COMP1
may be programmed to the same value, effectively creating two regions, but COMP1 must always
July 25, 2011
535
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
be greater than or equal to the value of COMP0. A COMP1 value that is less than COMP0 generates
unpredictable results.
Low-Band Operation
To operate in the low-band region, either the CIC field field in the ADCDCCTLn register must be
programmed to 0x0. This setting causes interrupts or triggers to be generated in the low-band region
as defined by the programmed operational mode. An example of the state of the interrupt/trigger
signal in the low-band region for each of the operational modes is shown in Figure 12-14 on page 536.
Note that a "0" in a column following the operational mode name (Always, Once, Hysteresis Always,
and Hysteresis Once) indicates that the interrupt or trigger signal is de-asserted and a "1" indicates
that the signal is asserted.
Figure 12-14. Low-Band Operation (CIC=0x0)
COMP1
COMP0
Always –
0
0
0
0
1
1
1
0
0
1
1
0
0
0
0
1
Once –
0
0
0
0
1
0
0
0
0
1
0
0
0
0
0
1
Hysteresis Always –
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
1
Hysteresis Once –
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
1
Mid-Band Operation
To operate in the mid-band region, either the CIC field field in the ADCDCCTLn register must be
programmed to 0x1. This setting causes interrupts or triggers to be generated in the mid-band region
according the operation mode. Only the Always and Once operational modes are available in the
mid-band region. An example of the state of the interrupt/trigger signal in the mid-band region for
each of the allowed operational modes is shown in Figure 12-15 on page 537. Note that a "0" in a
column following the operational mode name (Always or Once) indicates that the interrupt or trigger
signal is de-asserted and a "1" indicates that the signal is asserted.
536
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 12-15. Mid-Band Operation (CIC=0x1)
COMP1
COMP0
Always –
0
0
1
1
0
0
0
1
1
1
0
0
1
1
0
0
Once –
0
0
1
0
0
0
0
1
0
0
0
0
1
0
0
0
Hysteresis Always –
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Hysteresis Once –
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
High-Band Operation
To operate in the high-band region, either the CIC field field in the ADCDCCTLn register must be
programmed to 0x3. This setting causes interrupts or triggers to be generated in the high-band
region according the operation mode. An example of the state of the interrupt/trigger signal in the
high-band region for each of the allowed operational modes is shown in Figure 12-16 on page 538.
Note that a "0" in a column following the operational mode name (Always, Once, Hysteresis Always,
and Hysteresis Once) indicates that the interrupt or trigger signal is de-asserted and a "1" indicates
that the signal is asserted.
July 25, 2011
537
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Figure 12-16. High-Band Operation (CIC=0x3)
COMP1
COMP0
12.4
Always –
0
0
0
0
1
1
1
0
0
1
1
0
0
0
1
1
Once –
0
0
0
0
1
0
0
0
0
1
0
0
0
0
1
0
Hysteresis Always –
0
0
0
0
1
1
1
1
1
1
1
1
0
0
1
1
Hysteresis Once –
0
0
0
0
1
0
0
0
0
0
0
0
0
0
1
0
Initialization and Configuration
In order for the ADC module to be used, the PLL must be enabled and programmed to a supported
crystal frequency in the RCC register (see page 198). Using unsupported frequencies can cause
faulty operation in the ADC module.
12.4.1
Module Initialization
Initialization of the ADC module is a simple process with very few steps: enabling the clock to the
ADC, disabling the analog isolation circuit associated with all inputs that are to be used, and
reconfiguring the sample sequencer priorities (if needed).
The initialization sequence for the ADC is as follows:
1. Enable the ADC clock by using the RCGC0 register (see page 237).
2. Enable the clock to the appropriate GPIO modules via the RCGC2 register (see page 251). To
find out which GPIO ports to enable, refer to “Signal Description” on page 522.
3. Set the GPIO AFSEL bits for the ADC input pins (see page 418). To determine which GPIOs to
configure, see Table 17-4 on page 753.
4. Configure the AINx and VREFA signals to be analog inputs by clearing the corresponding DEN
bit in the GPIO Digital Enable (GPIODEN) register (see page 429).
5. Disable the analog isolation circuit for all ADC input pins that are to be used by writing a 1 to
the appropriate bits of the GPIOAMSEL register (see page 434) in the associated GPIO block.
538
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
6. If required by the application, reconfigure the sample sequencer priorities in the ADCSSPRI
register. The default configuration has Sample Sequencer 0 with the highest priority and Sample
Sequencer 3 as the lowest priority.
12.4.2
Sample Sequencer Configuration
Configuration of the sample sequencers is slightly more complex than the module initialization
because each sample sequencer is completely programmable.
The configuration for each sample sequencer should be as follows:
1. Ensure that the sample sequencer is disabled by clearing the corresponding ASENn bit in the
ADCACTSS register. Programming of the sample sequencers is allowed without having them
enabled. Disabling the sequencer during programming prevents erroneous execution if a trigger
event were to occur during the configuration process.
2. Configure the trigger event for the sample sequencer in the ADCEMUX register.
3. For each sample in the sample sequence, configure the corresponding input source in the
ADCSSMUXn register.
4. For each sample in the sample sequence, configure the sample control bits in the corresponding
nibble in the ADCSSCTLn register. When programming the last nibble, ensure that the END bit
is set. Failure to set the END bit causes unpredictable behavior.
5. If interrupts are to be used, set the corresponding MASK bit in the ADCIM register.
6. Enable the sample sequencer logic by setting the corresponding ASENn bit in the ADCACTSS
register.
12.5
Register Map
Table 12-5 on page 539 lists the ADC registers. The offset listed is a hexadecimal increment to the
register’s address, relative to that ADC module's base address of:
■ ADC0: 0x4003.8000
■ ADC1: 0x4003.9000
Note that the ADC module clock must be enabled before the registers can be programmed (see
page 237). There must be a delay of 3 system clocks after the ADC module clock is enabled before
any ADC module registers are accessed.
Table 12-5. ADC Register Map
Description
See
page
Offset
Name
Type
Reset
0x000
ADCACTSS
R/W
0x0000.0000
ADC Active Sample Sequencer
542
0x004
ADCRIS
RO
0x0000.0000
ADC Raw Interrupt Status
543
0x008
ADCIM
R/W
0x0000.0000
ADC Interrupt Mask
545
0x00C
ADCISC
R/W1C
0x0000.0000
ADC Interrupt Status and Clear
547
0x010
ADCOSTAT
R/W1C
0x0000.0000
ADC Overflow Status
550
0x014
ADCEMUX
R/W
0x0000.0000
ADC Event Multiplexer Select
552
July 25, 2011
539
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Table 12-5. ADC Register Map (continued)
Offset
Name
0x018
See
page
Type
Reset
Description
ADCUSTAT
R/W1C
0x0000.0000
ADC Underflow Status
556
0x020
ADCSSPRI
R/W
0x0000.3210
ADC Sample Sequencer Priority
557
0x024
ADCSPC
R/W
0x0000.0000
ADC Sample Phase Control
559
0x028
ADCPSSI
R/W
-
ADC Processor Sample Sequence Initiate
561
0x030
ADCSAC
R/W
0x0000.0000
ADC Sample Averaging Control
563
0x034
ADCDCISC
R/W1C
0x0000.0000
ADC Digital Comparator Interrupt Status and Clear
564
0x038
ADCCTL
R/W
0x0000.0000
ADC Control
566
0x040
ADCSSMUX0
R/W
0x0000.0000
ADC Sample Sequence Input Multiplexer Select 0
567
0x044
ADCSSCTL0
R/W
0x0000.0000
ADC Sample Sequence Control 0
569
0x048
ADCSSFIFO0
RO
-
ADC Sample Sequence Result FIFO 0
572
0x04C
ADCSSFSTAT0
RO
0x0000.0100
ADC Sample Sequence FIFO 0 Status
573
0x050
ADCSSOP0
R/W
0x0000.0000
ADC Sample Sequence 0 Operation
575
0x054
ADCSSDC0
R/W
0x0000.0000
ADC Sample Sequence 0 Digital Comparator Select
577
0x060
ADCSSMUX1
R/W
0x0000.0000
ADC Sample Sequence Input Multiplexer Select 1
579
0x064
ADCSSCTL1
R/W
0x0000.0000
ADC Sample Sequence Control 1
580
0x068
ADCSSFIFO1
RO
-
ADC Sample Sequence Result FIFO 1
572
0x06C
ADCSSFSTAT1
RO
0x0000.0100
ADC Sample Sequence FIFO 1 Status
573
0x070
ADCSSOP1
R/W
0x0000.0000
ADC Sample Sequence 1 Operation
582
0x074
ADCSSDC1
R/W
0x0000.0000
ADC Sample Sequence 1 Digital Comparator Select
583
0x080
ADCSSMUX2
R/W
0x0000.0000
ADC Sample Sequence Input Multiplexer Select 2
579
0x084
ADCSSCTL2
R/W
0x0000.0000
ADC Sample Sequence Control 2
580
0x088
ADCSSFIFO2
RO
-
ADC Sample Sequence Result FIFO 2
572
0x08C
ADCSSFSTAT2
RO
0x0000.0100
ADC Sample Sequence FIFO 2 Status
573
0x090
ADCSSOP2
R/W
0x0000.0000
ADC Sample Sequence 2 Operation
582
0x094
ADCSSDC2
R/W
0x0000.0000
ADC Sample Sequence 2 Digital Comparator Select
583
0x0A0
ADCSSMUX3
R/W
0x0000.0000
ADC Sample Sequence Input Multiplexer Select 3
585
0x0A4
ADCSSCTL3
R/W
0x0000.0002
ADC Sample Sequence Control 3
586
0x0A8
ADCSSFIFO3
RO
-
ADC Sample Sequence Result FIFO 3
572
0x0AC
ADCSSFSTAT3
RO
0x0000.0100
ADC Sample Sequence FIFO 3 Status
573
0x0B0
ADCSSOP3
R/W
0x0000.0000
ADC Sample Sequence 3 Operation
587
0x0B4
ADCSSDC3
R/W
0x0000.0000
ADC Sample Sequence 3 Digital Comparator Select
588
0xD00
ADCDCRIC
R/W
0x0000.0000
ADC Digital Comparator Reset Initial Conditions
589
540
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 12-5. ADC Register Map (continued)
Name
Type
Reset
0xE00
ADCDCCTL0
R/W
0x0000.0000
ADC Digital Comparator Control 0
594
0xE04
ADCDCCTL1
R/W
0x0000.0000
ADC Digital Comparator Control 1
594
0xE08
ADCDCCTL2
R/W
0x0000.0000
ADC Digital Comparator Control 2
594
0xE0C
ADCDCCTL3
R/W
0x0000.0000
ADC Digital Comparator Control 3
594
0xE10
ADCDCCTL4
R/W
0x0000.0000
ADC Digital Comparator Control 4
594
0xE14
ADCDCCTL5
R/W
0x0000.0000
ADC Digital Comparator Control 5
594
0xE18
ADCDCCTL6
R/W
0x0000.0000
ADC Digital Comparator Control 6
594
0xE1C
ADCDCCTL7
R/W
0x0000.0000
ADC Digital Comparator Control 7
594
0xE40
ADCDCCMP0
R/W
0x0000.0000
ADC Digital Comparator Range 0
596
0xE44
ADCDCCMP1
R/W
0x0000.0000
ADC Digital Comparator Range 1
596
0xE48
ADCDCCMP2
R/W
0x0000.0000
ADC Digital Comparator Range 2
596
0xE4C
ADCDCCMP3
R/W
0x0000.0000
ADC Digital Comparator Range 3
596
0xE50
ADCDCCMP4
R/W
0x0000.0000
ADC Digital Comparator Range 4
596
0xE54
ADCDCCMP5
R/W
0x0000.0000
ADC Digital Comparator Range 5
596
0xE58
ADCDCCMP6
R/W
0x0000.0000
ADC Digital Comparator Range 6
596
0xE5C
ADCDCCMP7
R/W
0x0000.0000
ADC Digital Comparator Range 7
596
12.6
Description
See
page
Offset
Register Descriptions
The remainder of this section lists and describes the ADC registers, in numerical order by address
offset.
July 25, 2011
541
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 1: ADC Active Sample Sequencer (ADCACTSS), offset 0x000
This register controls the activation of the sample sequencers. Each sample sequencer can be
enabled or disabled independently.
ADC Active Sample Sequencer (ADCACTSS)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x000
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
ASEN3
ASEN2
ASEN1
ASEN0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
3
ASEN3
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
ADC SS3 Enable
Value Description
2
ASEN2
R/W
0
1
Sample Sequencer 3 is enabled.
0
Sample Sequencer 3 is disabled.
ADC SS2 Enable
Value Description
1
ASEN1
R/W
0
1
Sample Sequencer 2 is enabled.
0
Sample Sequencer 2 is disabled.
ADC SS1 Enable
Value Description
0
ASEN0
R/W
0
1
Sample Sequencer 1 is enabled.
0
Sample Sequencer 1 is disabled.
ADC SS0 Enable
Value Description
1
Sample Sequencer 0 is enabled.
0
Sample Sequencer 0 is disabled.
542
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 2: ADC Raw Interrupt Status (ADCRIS), offset 0x004
This register shows the status of the raw interrupt signal of each sample sequencer. These bits may
be polled by software to look for interrupt conditions without sending the interrupts to the interrupt
controller.
ADC Raw Interrupt Status (ADCRIS)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x004
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
24
23
22
21
20
19
18
17
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
9
8
7
6
5
4
3
2
1
0
INR3
INR2
INR1
INR0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
INRDC
reserved
Type
Reset
16
Bit/Field
Name
Type
Reset
Description
31:17
reserved
RO
0x000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
16
INRDC
RO
0
Digital Comparator Raw Interrupt Status
Value Description
1
At least one bit in the ADCDCISC register is set, meaning that
a digital comparator interrupt has occurred.
0
All bits in the ADCDCISC register are clear.
15:4
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
3
INR3
RO
0
SS3 Raw Interrupt Status
Value Description
1
A sample has completed conversion and the respective
ADCSSCTL3 IEn bit is set, enabling a raw interrupt.
0
An interrupt has not occurred.
This bit is cleared by writing a 1 to the IN3 bit in the ADCISC register.
2
INR2
RO
0
SS2 Raw Interrupt Status
Value Description
1
A sample has completed conversion and the respective
ADCSSCTL2 IEn bit is set, enabling a raw interrupt.
0
An interrupt has not occurred.
This bit is cleared by writing a 1 to the IN2 bit in the ADCISC register.
July 25, 2011
543
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
1
INR1
RO
0
Description
SS1 Raw Interrupt Status
Value Description
1
A sample has completed conversion and the respective
ADCSSCTL1 IEn bit is set, enabling a raw interrupt.
0
An interrupt has not occurred.
This bit is cleared by writing a 1 to the IN1 bit in the ADCISC register.
0
INR0
RO
0
SS0 Raw Interrupt Status
Value Description
1
A sample has completed conversion and the respective
ADCSSCTL0 IEn bit is set, enabling a raw interrupt.
0
An interrupt has not occurred.
This bit is cleared by writing a 1 to the IN0 bit in the ADCISC register.
544
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 3: ADC Interrupt Mask (ADCIM), offset 0x008
This register controls whether the sample sequencer and digital comparator raw interrupt signals
are sent to the interrupt controller. Each raw interrupt signal can be masked independently. Only a
single DCONSSn bit should be set at any given time. Setting more than one of these bits results in
the INRDC bit from the ADCRIS register being masked, and no interrupt is generated on any of the
sample sequencer interrupt lines.
ADC Interrupt Mask (ADCIM)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x008
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
25
24
23
22
21
20
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
9
8
7
6
5
4
3
2
1
0
MASK3
MASK2
MASK1
MASK0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
18
17
16
DCONSS3 DCONSS2 DCONSS1 DCONSS0
reserved
Type
Reset
19
Bit/Field
Name
Type
Reset
Description
31:20
reserved
RO
0x000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
19
DCONSS3
R/W
0
Digital Comparator Interrupt on SS3
Value Description
18
DCONSS2
R/W
0
1
The raw interrupt signal from the digital comparators (INRDC
bit in the ADCRIS register) is sent to the interrupt controller on
the SS3 interrupt line.
0
The status of the digital comparators does not affect the SS3
interrupt status.
Digital Comparator Interrupt on SS2
Value Description
17
DCONSS1
R/W
0
1
The raw interrupt signal from the digital comparators (INRDC
bit in the ADCRIS register) is sent to the interrupt controller on
the SS2 interrupt line.
0
The status of the digital comparators does not affect the SS2
interrupt status.
Digital Comparator Interrupt on SS1
Value Description
1
The raw interrupt signal from the digital comparators (INRDC
bit in the ADCRIS register) is sent to the interrupt controller on
the SS1 interrupt line.
0
The status of the digital comparators does not affect the SS1
interrupt status.
July 25, 2011
545
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
16
DCONSS0
R/W
0
Description
Digital Comparator Interrupt on SS0
Value Description
1
The raw interrupt signal from the digital comparators (INRDC
bit in the ADCRIS register) is sent to the interrupt controller on
the SS0 interrupt line.
0
The status of the digital comparators does not affect the SS0
interrupt status.
15:4
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
3
MASK3
R/W
0
SS3 Interrupt Mask
Value Description
2
MASK2
R/W
0
1
The raw interrupt signal from Sample Sequencer 3 (ADCRIS
register INR3 bit) is sent to the interrupt controller.
0
The status of Sample Sequencer 3 does not affect the SS3
interrupt status.
SS2 Interrupt Mask
Value Description
1
MASK1
R/W
0
1
The raw interrupt signal from Sample Sequencer 2 (ADCRIS
register INR2 bit) is sent to the interrupt controller.
0
The status of Sample Sequencer 2 does not affect the SS2
interrupt status.
SS1 Interrupt Mask
Value Description
0
MASK0
R/W
0
1
The raw interrupt signal from Sample Sequencer 1 (ADCRIS
register INR1 bit) is sent to the interrupt controller.
0
The status of Sample Sequencer 1 does not affect the SS1
interrupt status.
SS0 Interrupt Mask
Value Description
1
The raw interrupt signal from Sample Sequencer 0 (ADCRIS
register INR0 bit) is sent to the interrupt controller.
0
The status of Sample Sequencer 0 does not affect the SS0
interrupt status.
546
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 4: ADC Interrupt Status and Clear (ADCISC), offset 0x00C
This register provides the mechanism for clearing sample sequencer interrupt conditions and shows
the status of interrupts generated by the sample sequencers and the digital comparators which have
been sent to the interrupt controller. When read, each bit field is the logical AND of the respective
INR and MASK bits. Sample sequencer interrupts are cleared by writing a 1 to the corresponding
bit position. Digital comparator interrupts are cleared by writing a 1 to the appropriate bits in the
ADCDCISC register. If software is polling the ADCRIS instead of generating interrupts, the sample
sequence INRn bits are still cleared via the ADCISC register, even if the INn bit is not set.
ADC Interrupt Status and Clear (ADCISC)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x00C
Type R/W1C, reset 0x0000.0000
31
30
29
28
27
26
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
25
24
23
22
21
20
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
9
8
7
6
5
4
3
2
1
0
IN3
IN2
IN1
IN0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
reserved
Type
Reset
18
17
16
DCINSS3 DCINSS2 DCINSS1 DCINSS0
reserved
Type
Reset
19
Bit/Field
Name
Type
Reset
Description
31:20
reserved
RO
0x000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
19
DCINSS3
RO
0
Digital Comparator Interrupt Status on SS3
Value Description
1
Both the INRDC bit in the ADCRIS register and the DCONSS3
bit in the ADCIM register are set, providing a level-based
interrupt to the interrupt controller.
0
No interrupt has occurred or the interrupt is masked.
This bit is cleared by writing a 1 to it. Clearing this bit also clears the
INRDC bit in the ADCRIS register.
18
DCINSS2
RO
0
Digital Comparator Interrupt Status on SS2
Value Description
1
Both the INRDC bit in the ADCRIS register and the DCONSS2
bit in the ADCIM register are set, providing a level-based
interrupt to the interrupt controller.
0
No interrupt has occurred or the interrupt is masked.
This bit is cleared by writing a 1 to it. Clearing this bit also clears the
INRDC bit in the ADCRIS register.
July 25, 2011
547
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
17
DCINSS1
RO
0
Description
Digital Comparator Interrupt Status on SS1
Value Description
1
Both the INRDC bit in the ADCRIS register and the DCONSS1
bit in the ADCIM register are set, providing a level-based
interrupt to the interrupt controller.
0
No interrupt has occurred or the interrupt is masked.
This bit is cleared by writing a 1 to it. Clearing this bit also clears the
INRDC bit in the ADCRIS register.
16
DCINSS0
RO
0
Digital Comparator Interrupt Status on SS0
Value Description
1
Both the INRDC bit in the ADCRIS register and the DCONSS0
bit in the ADCIM register are set, providing a level-based
interrupt to the interrupt controller.
0
No interrupt has occurred or the interrupt is masked.
This bit is cleared by writing a 1 to it. Clearing this bit also clears the
INRDC bit in the ADCRIS register.
15:4
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
3
IN3
R/W1C
0
SS3 Interrupt Status and Clear
Value Description
1
Both the INR3 bit in the ADCRIS register and the MASK3 bit in
the ADCIM register are set, providing a level-based interrupt to
the interrupt controller.
0
No interrupt has occurred or the interrupt is masked.
This bit is cleared by writing a 1. Clearing this bit also clears the INR3
bit in the ADCRIS register.
2
IN2
R/W1C
0
SS2 Interrupt Status and Clear
Value Description
1
Both the INR2 bit in the ADCRIS register and the MASK2 bit in
the ADCIM register are set, providing a level-based interrupt to
the interrupt controller.
0
No interrupt has occurred or the interrupt is masked.
This bit is cleared by writing a 1. Clearing this bit also clears the INR2
bit in the ADCRIS register.
548
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
1
IN1
R/W1C
0
Description
SS1 Interrupt Status and Clear
Value Description
1
Both the INR1 bit in the ADCRIS register and the MASK1 bit in
the ADCIM register are set, providing a level-based interrupt to
the interrupt controller.
0
No interrupt has occurred or the interrupt is masked.
This bit is cleared by writing a 1. Clearing this bit also clears the INR1
bit in the ADCRIS register.
0
IN0
R/W1C
0
SS0 Interrupt Status and Clear
Value Description
1
Both the INR0 bit in the ADCRIS register and the MASK0 bit in
the ADCIM register are set, providing a level-based interrupt to
the interrupt controller.
0
No interrupt has occurred or the interrupt is masked.
This bit is cleared by writing a 1. Clearing this bit also clears the INR0
bit in the ADCRIS register.
July 25, 2011
549
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 5: ADC Overflow Status (ADCOSTAT), offset 0x010
This register indicates overflow conditions in the sample sequencer FIFOs. Once the overflow
condition has been handled by software, the condition can be cleared by writing a 1 to the
corresponding bit position.
ADC Overflow Status (ADCOSTAT)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x010
Type R/W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
OV3
OV2
OV1
OV0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
3
OV3
R/W1C
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SS3 FIFO Overflow
Value Description
1
The FIFO for Sample Sequencer 3 has hit an overflow condition,
meaning that the FIFO is full and a write was requested. When
an overflow is detected, the most recent write is dropped.
0
The FIFO has not overflowed.
This bit is cleared by writing a 1.
2
OV2
R/W1C
0
SS2 FIFO Overflow
Value Description
1
The FIFO for Sample Sequencer 2 has hit an overflow condition,
meaning that the FIFO is full and a write was requested. When
an overflow is detected, the most recent write is dropped.
0
The FIFO has not overflowed.
This bit is cleared by writing a 1.
1
OV1
R/W1C
0
SS1 FIFO Overflow
Value Description
1
The FIFO for Sample Sequencer 1 has hit an overflow condition,
meaning that the FIFO is full and a write was requested. When
an overflow is detected, the most recent write is dropped.
0
The FIFO has not overflowed.
This bit is cleared by writing a 1.
550
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
0
OV0
R/W1C
0
Description
SS0 FIFO Overflow
Value Description
1
The FIFO for Sample Sequencer 0 has hit an overflow condition,
meaning that the FIFO is full and a write was requested. When
an overflow is detected, the most recent write is dropped.
0
The FIFO has not overflowed.
This bit is cleared by writing a 1.
July 25, 2011
551
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 6: ADC Event Multiplexer Select (ADCEMUX), offset 0x014
The ADCEMUX selects the event (trigger) that initiates sampling for each sample sequencer. Each
sample sequencer can be configured with a unique trigger source.
ADC Event Multiplexer Select (ADCEMUX)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x014
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
EM3
Type
Reset
EM2
EM1
Bit/Field
Name
Type
Reset
31:16
reserved
RO
0x0000
15:12
EM3
R/W
0x0
EM0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SS3 Trigger Select
This field selects the trigger source for Sample Sequencer 3.
The valid configurations for this field are:
Value
Event
0x0
Processor (default)
The trigger is initiated by setting the SSn bit in the ADCPSSI
register.
0x1
reserved
0x2
reserved
0x3
reserved
0x4
External (GPIO PB4)
This trigger is connected to the GPIO interrupt for PB4 (see
“ADC Trigger Source” on page 403).
Note:
0x5
PB4 can be used to trigger the ADC. However, the
PB4/AIN10 pin cannot be used as both a GPIO
and an analog input.
Timer
In addition, the trigger must be enabled with the TnOTE bit
in the GPTMCTL register (page 470).
0x6
reserved
0x7
reserved
0x8
reserved
0x9
reserved
0xA-0xE reserved
0xF
Always (continuously sample)
552
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
11:8
EM2
R/W
0x0
Description
SS2 Trigger Select
This field selects the trigger source for Sample Sequencer 2.
The valid configurations for this field are:
Value
Event
0x0
Processor (default)
The trigger is initiated by setting the SSn bit in the ADCPSSI
register.
0x1
reserved
0x2
reserved
0x3
reserved
0x4
External (GPIO PB4)
This trigger is connected to the GPIO interrupt for PB4 (see
“ADC Trigger Source” on page 403).
Note:
0x5
PB4 can be used to trigger the ADC. However, the
PB4/AIN10 pin cannot be used as both a GPIO
and an analog input.
Timer
In addition, the trigger must be enabled with the TnOTE bit
in the GPTMCTL register (page 470).
0x6
reserved
0x7
reserved
0x8
reserved
0x9
reserved
0xA-0xE reserved
0xF
Always (continuously sample)
July 25, 2011
553
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
7:4
EM1
R/W
0x0
Description
SS1 Trigger Select
This field selects the trigger source for Sample Sequencer 1.
The valid configurations for this field are:
Value
Event
0x0
Processor (default)
The trigger is initiated by setting the SSn bit in the ADCPSSI
register.
0x1
reserved
0x2
reserved
0x3
reserved
0x4
External (GPIO PB4)
This trigger is connected to the GPIO interrupt for PB4 (see
“ADC Trigger Source” on page 403).
Note:
0x5
PB4 can be used to trigger the ADC. However, the
PB4/AIN10 pin cannot be used as both a GPIO
and an analog input.
Timer
In addition, the trigger must be enabled with the TnOTE bit
in the GPTMCTL register (page 470).
0x6
reserved
0x7
reserved
0x8
reserved
0x9
reserved
0xA-0xE reserved
0xF
Always (continuously sample)
554
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
3:0
EM0
R/W
0x0
Description
SS0 Trigger Select
This field selects the trigger source for Sample Sequencer 0
The valid configurations for this field are:
Value
Event
0x0
Processor (default)
The trigger is initiated by setting the SSn bit in the ADCPSSI
register.
0x1
reserved
0x2
reserved
0x3
reserved
0x4
External (GPIO PB4)
This trigger is connected to the GPIO interrupt for PB4 (see
“ADC Trigger Source” on page 403).
Note:
0x5
PB4 can be used to trigger the ADC. However, the
PB4/AIN10 pin cannot be used as both a GPIO
and an analog input.
Timer
In addition, the trigger must be enabled with the TnOTE bit
in the GPTMCTL register (page 470).
0x6
reserved
0x7
reserved
0x8
reserved
0x9
reserved
0xA-0xE reserved
0xF
Always (continuously sample)
July 25, 2011
555
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 7: ADC Underflow Status (ADCUSTAT), offset 0x018
This register indicates underflow conditions in the sample sequencer FIFOs. The corresponding
underflow condition is cleared by writing a 1 to the relevant bit position.
ADC Underflow Status (ADCUSTAT)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x018
Type R/W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
UV3
UV2
UV1
UV0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
3
UV3
R/W1C
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SS3 FIFO Underflow
The valid configurations for this field are shown below. This bit is cleared
by writing a 1.
Value Description
2
UV2
R/W1C
0
1
The FIFO for the Sample Sequencer has hit an underflow
condition, meaning that the FIFO is empty and a read was
requested. The problematic read does not move the FIFO
pointers, and 0s are returned.
0
The FIFO has not underflowed.
SS2 FIFO Underflow
The valid configurations are the same as those for the UV3 field. This
bit is cleared by writing a 1.
1
UV1
R/W1C
0
SS1 FIFO Underflow
The valid configurations are the same as those for the UV3 field. This
bit is cleared by writing a 1.
0
UV0
R/W1C
0
SS0 FIFO Underflow
The valid configurations are the same as those for the UV3 field. This
bit is cleared by writing a 1.
556
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 8: ADC Sample Sequencer Priority (ADCSSPRI), offset 0x020
This register sets the priority for each of the sample sequencers. Out of reset, Sequencer 0 has the
highest priority, and Sequencer 3 has the lowest priority. When reconfiguring sequence priorities,
each sequence must have a unique priority for the ADC to operate properly.
ADC Sample Sequencer Priority (ADCSSPRI)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x020
Type R/W, reset 0x0000.3210
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
R/W
1
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
R/W
0
RO
0
RO
0
R/W
0
R/W
1
RO
0
RO
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
RO
0
SS3
R/W
1
reserved
RO
0
SS2
R/W
1
Bit/Field
Name
Type
Reset
31:14
reserved
RO
0x0000.0
13:12
SS3
R/W
0x3
reserved
SS1
reserved
SS0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SS3 Priority
This field contains a binary-encoded value that specifies the priority
encoding of Sample Sequencer 3. A priority encoding of 0x0 is highest
and 0x3 is lowest. The priorities assigned to the sequencers must be
uniquely mapped. The ADC may not operate properly if two or more
fields are equal.
11:10
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
9:8
SS2
R/W
0x2
SS2 Priority
This field contains a binary-encoded value that specifies the priority
encoding of Sample Sequencer 2. A priority encoding of 0x0 is highest
and 0x3 is lowest. The priorities assigned to the sequencers must be
uniquely mapped. The ADC may not operate properly if two or more
fields are equal.
7:6
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
5:4
SS1
R/W
0x1
SS1 Priority
This field contains a binary-encoded value that specifies the priority
encoding of Sample Sequencer 1. A priority encoding of 0x0 is highest
and 0x3 is lowest. The priorities assigned to the sequencers must be
uniquely mapped. The ADC may not operate properly if two or more
fields are equal.
3:2
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
557
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
Description
1:0
SS0
R/W
0x0
SS0 Priority
This field contains a binary-encoded value that specifies the priority
encoding of Sample Sequencer 0. A priority encoding of 0x0 is highest
and 0x3 is lowest. The priorities assigned to the sequencers must be
uniquely mapped. The ADC may not operate properly if two or more
fields are equal.
558
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 9: ADC Sample Phase Control (ADCSPC), offset 0x024
This register allows the ADC module to sample at one of 16 different discrete phases from 0.0°
through 337.5°. For example, the sample rate could be effectively doubled by sampling a signal
using one ADC module configured with the standard sample time and the second ADC module
configured with a 180.0° phase lag.
Note:
Care should be taken when the PHASE field is non-zero, as the resulting delay in sampling
the AINx input may result in undesirable system consequences. The time from ADC trigger
to sample is increased and could make the response time longer than anticipated. The
added latency could have ramifications in the system design. Designers should carefully
consider the impact of this delay.
ADC Sample Phase Control (ADCSPC)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x024
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
1
0
R/W
0
R/W
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
PHASE
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
559
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
3:0
PHASE
R/W
0x0
Description
Phase Difference
This field selects the sample phase difference from the standard sample
time.
Value Description
0x0
ADC sample lags by 0.0°
0x1
ADC sample lags by 22.5°
0x2
ADC sample lags by 45.0°
0x3
ADC sample lags by 67.5°
0x4
ADC sample lags by 90.0°
0x5
ADC sample lags by 112.5°
0x6
ADC sample lags by 135.0°
0x7
ADC sample lags by 157.5°
0x8
ADC sample lags by 180.0°
0x9
ADC sample lags by 202.5°
0xA
ADC sample lags by 225.0°
0xB
ADC sample lags by 247.5°
0xC
ADC sample lags by 270.0°
0xD
ADC sample lags by 292.5°
0xE
ADC sample lags by 315.0°
0xF
ADC sample lags by 337.5°
560
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 10: ADC Processor Sample Sequence Initiate (ADCPSSI), offset 0x028
This register provides a mechanism for application software to initiate sampling in the sample
sequencers. Sample sequences can be initiated individually or in any combination. When multiple
sequences are triggered simultaneously, the priority encodings in ADCSSPRI dictate execution
order.
This register also provides a means to configure and then initiate concurrent sampling on all ADC
modules. To do this, the first ADC module should be configured. The ADCPSSI register for that
module should then be written. The appropriate SS bits should be set along with the SYNCWAIT bit.
Additional ADC modules should then be configured following the same procedure. Once the final
ADC module is configured, its ADCPSSI register should be written with the appropriate SS bits set
along with the GSYNC bit. All of the ADC modules then begin concurrent sampling according to their
configuration.
ADC Processor Sample Sequence Initiate (ADCPSSI)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x028
Type R/W, reset 31
30
GSYNC
Type
Reset
29
28
reserved
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
reserved
SYNCWAIT
R/W
0
RO
0
RO
0
RO
0
R/W
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31
GSYNC
R/W
0
RO
0
RO
0
RO
0
RO
0
RO
0
3
2
1
0
SS3
SS2
SS1
SS0
WO
-
WO
-
WO
-
WO
-
Description
Global Synchronize
Value Description
30:28
reserved
RO
0x0
27
SYNCWAIT
R/W
0
1
This bit initiates sampling in multiple ADC modules at the same
time. Any ADC module that has been initialized by setting an
SSn bit and the SYNCWAIT bit starts sampling once this bit is
written.
0
This bit is cleared once sampling has been initiated.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Synchronize Wait
Value Description
26:4
reserved
RO
0x0000.0
1
This bit allows the sample sequences to be initiated, but delays
sampling until the GSYNC bit is set.
0
Sampling begins when a sample sequence has been initiated.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
561
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
Description
3
SS3
WO
-
SS3 Initiate
Value Description
1
Begin sampling on Sample Sequencer 3, if the sequencer is
enabled in the ADCACTSS register.
0
No effect.
Only a write by software is valid; a read of this register returns no
meaningful data.
2
SS2
WO
-
SS2 Initiate
Value Description
1
Begin sampling on Sample Sequencer 2, if the sequencer is
enabled in the ADCACTSS register.
0
No effect.
Only a write by software is valid; a read of this register returns no
meaningful data.
1
SS1
WO
-
SS1 Initiate
Value Description
1
Begin sampling on Sample Sequencer 1, if the sequencer is
enabled in the ADCACTSS register.
0
No effect.
Only a write by software is valid; a read of this register returns no
meaningful data.
0
SS0
WO
-
SS0 Initiate
Value Description
1
Begin sampling on Sample Sequencer 0, if the sequencer is
enabled in the ADCACTSS register.
0
No effect.
Only a write by software is valid; a read of this register returns no
meaningful data.
562
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 11: ADC Sample Averaging Control (ADCSAC), offset 0x030
This register controls the amount of hardware averaging applied to conversion results. The final
conversion result stored in the FIFO is averaged from 2 AVG consecutive ADC samples at the specified
ADC speed. If AVG is 0, the sample is passed directly through without any averaging. If AVG=6,
then 64 consecutive ADC samples are averaged to generate one result in the sequencer FIFO. An
AVG=7 provides unpredictable results.
ADC Sample Averaging Control (ADCSAC)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x030
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:3
reserved
RO
0x0000.000
2:0
AVG
R/W
0x0
AVG
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Hardware Averaging Control
Specifies the amount of hardware averaging that will be applied to ADC
samples. The AVG field can be any value between 0 and 6. Entering a
value of 7 creates unpredictable results.
Value Description
0x0
No hardware oversampling
0x1
2x hardware oversampling
0x2
4x hardware oversampling
0x3
8x hardware oversampling
0x4
16x hardware oversampling
0x5
32x hardware oversampling
0x6
64x hardware oversampling
0x7
reserved
July 25, 2011
563
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 12: ADC Digital Comparator Interrupt Status and Clear (ADCDCISC),
offset 0x034
This register provides status and acknowledgement of digital comparator interrupts. One bit is
provided for each comparator.
ADC Digital Comparator Interrupt Status and Clear (ADCDCISC)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x034
Type R/W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7
DCINT7
R/W1C
0
RO
0
RO
0
7
6
5
4
3
2
1
0
DCINT7
DCINT6
DCINT5
DCINT4
DCINT3
DCINT2
DCINT1
DCINT0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
R/W1C
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Digital Comparator 7 Interrupt Status and Clear
Value Description
1
Digital Comparator 7 has generated an interrupt.
0
No interrupt.
This bit is cleared by writing a 1.
6
DCINT6
R/W1C
0
Digital Comparator 6 Interrupt Status and Clear
Value Description
1
Digital Comparator 6 has generated an interrupt.
0
No interrupt.
This bit is cleared by writing a 1.
5
DCINT5
R/W1C
0
Digital Comparator 5 Interrupt Status and Clear
Value Description
1
Digital Comparator 5 has generated an interrupt.
0
No interrupt.
This bit is cleared by writing a 1.
564
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
4
DCINT4
R/W1C
0
Description
Digital Comparator 4 Interrupt Status and Clear
Value Description
1
Digital Comparator 4 has generated an interrupt.
0
No interrupt.
This bit is cleared by writing a 1.
3
DCINT3
R/W1C
0
Digital Comparator 3 Interrupt Status and Clear
Value Description
1
Digital Comparator 3 has generated an interrupt.
0
No interrupt.
This bit is cleared by writing a 1.
2
DCINT2
R/W1C
0
Digital Comparator 2 Interrupt Status and Clear
Value Description
1
Digital Comparator 2 has generated an interrupt.
0
No interrupt.
This bit is cleared by writing a 1.
1
DCINT1
R/W1C
0
Digital Comparator 1 Interrupt Status and Clear
Value Description
1
Digital Comparator 1 has generated an interrupt.
0
No interrupt.
This bit is cleared by writing a 1.
0
DCINT0
R/W1C
0
Digital Comparator 0 Interrupt Status and Clear
Value Description
1
Digital Comparator 0 has generated an interrupt.
0
No interrupt.
This bit is cleared by writing a 1.
July 25, 2011
565
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 13: ADC Control (ADCCTL), offset 0x038
This register configures various ADC module attributes, including the ADC resolution and the voltage
reference. The resolution of the ADC defaults to 10-bit for backwards compatibility with other members
of the Stellaris family, but can be configured to 12-bit resolution. The voltage reference for the
conversion can be the internal 3.0-V reference, an external voltage reference in the range of 2.4 V
to 3.06 V, or an external voltage reference in the range of 0.8 V to 1.02 V.
ADC Control (ADCCTL)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x038
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
RES
Bit/Field
Name
Type
Reset
31:5
reserved
RO
0x0000.000
4
RES
R/W
0
R/W
0
reserved
RO
0
VREF
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample Resolution
Value Description
1
The ADC returns 12-bit data to the FIFOs.
0
The ADC returns 10-bit data to the FIFOs.
3:2
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
1:0
VREF
R/W
0x0
Voltage Reference Select
Value Description
0x0
Internal Reference
The internal reference as the voltage reference. The conversion
range is from 0 V to 3.0 V.
0x1
3.0 V External Reference
A 3.0 V external VREFA input is the voltage reference. The ADC
conversion range is 0.0 V to the voltage of the VREFA input.
0x2
Reserved
0x3
1.0 V External Reference
A 1.0 V external VREFA input is the voltage reference. The ADC
conversion range is 0.0 V to three times the voltage of the
VREFA input.
566
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 14: ADC Sample Sequence Input Multiplexer Select 0 (ADCSSMUX0),
offset 0x040
This register defines the analog input configuration for each sample in a sequence executed with
Sample Sequencer 0. This register is 32 bits wide and contains information for eight possible
samples.
ADC Sample Sequence Input Multiplexer Select 0 (ADCSSMUX0)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x040
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
MUX7
Type
Reset
R/W
0
R/W
0
15
14
R/W
0
R/W
0
R/W
0
R/W
0
13
12
11
10
MUX3
Type
Reset
R/W
0
R/W
0
25
24
23
22
MUX6
R/W
0
R/W
0
R/W
0
R/W
0
9
8
7
6
MUX2
R/W
0
R/W
0
R/W
0
R/W
0
21
20
19
18
MUX5
R/W
0
R/W
0
R/W
0
R/W
0
5
4
3
2
MUX1
R/W
0
Bit/Field
Name
Type
Reset
31:28
MUX7
R/W
0x0
R/W
0
R/W
0
R/W
0
17
16
R/W
0
R/W
0
1
0
R/W
0
R/W
0
MUX4
MUX0
R/W
0
R/W
0
R/W
0
R/W
0
Description
8th Sample Input Select
The MUX7 field is used during the eighth sample of a sequence executed
with the sample sequencer. It specifies which of the analog inputs is
sampled for the analog-to-digital conversion. The value set here indicates
the corresponding pin, for example, a value of 0x1 indicates the input
is AIN1.
27:24
MUX6
R/W
0x0
7th Sample Input Select
The MUX6 field is used during the seventh sample of a sequence
executed with the sample sequencer. It specifies which of the analog
inputs is sampled for the analog-to-digital conversion.
23:20
MUX5
R/W
0x0
6th Sample Input Select
The MUX5 field is used during the sixth sample of a sequence executed
with the sample sequencer. It specifies which of the analog inputs is
sampled for the analog-to-digital conversion.
19:16
MUX4
R/W
0x0
5th Sample Input Select
The MUX4 field is used during the fifth sample of a sequence executed
with the sample sequencer. It specifies which of the analog inputs is
sampled for the analog-to-digital conversion.
15:12
MUX3
R/W
0x0
4th Sample Input Select
The MUX3 field is used during the fourth sample of a sequence executed
with the sample sequencer. It specifies which of the analog inputs is
sampled for the analog-to-digital conversion.
11:8
MUX2
R/W
0x0
3rd Sample Input Select
The MUX2 field is used during the third sample of a sequence executed
with the sample sequencer. It specifies which of the analog inputs is
sampled for the analog-to-digital conversion.
July 25, 2011
567
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
7:4
MUX1
R/W
0x0
Description
2nd Sample Input Select
The MUX1 field is used during the second sample of a sequence
executed with the sample sequencer. It specifies which of the analog
inputs is sampled for the analog-to-digital conversion.
3:0
MUX0
R/W
0x0
1st Sample Input Select
The MUX0 field is used during the first sample of a sequence executed
with the sample sequencer. It specifies which of the analog inputs is
sampled for the analog-to-digital conversion.
568
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 15: ADC Sample Sequence Control 0 (ADCSSCTL0), offset 0x044
This register contains the configuration information for each sample for a sequence executed with
a sample sequencer. When configuring a sample sequence, the END bit must be set for the final
sample, whether it be after the first sample, eighth sample, or any sample in between. This register
is 32 bits wide and contains information for eight possible samples.
ADC Sample Sequence Control 0 (ADCSSCTL0)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x044
Type R/W, reset 0x0000.0000
31
Type
Reset
Type
Reset
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
TS7
IE7
END7
D7
TS6
IE6
END6
D6
TS5
IE5
END5
D5
TS4
IE4
END4
D4
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
TS3
IE3
END3
D3
TS2
IE2
END2
D2
TS1
IE1
END1
D1
TS0
IE0
END0
D0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
31
TS7
R/W
0
Description
8th Sample Temp Sensor Select
Value Description
30
IE7
R/W
0
1
The temperature sensor is read during the eighth sample of the
sample sequence.
0
The input pin specified by the ADCSSMUXn register is read
during the eighth sample of the sample sequence.
8th Sample Interrupt Enable
Value Description
1
The raw interrupt signal (INR0 bit) is asserted at the end of the
eighth sample's conversion. If the MASK0 bit in the ADCIM
register is set, the interrupt is promoted to the interrupt controller.
0
The raw interrupt is not asserted to the interrupt controller.
It is legal to have multiple samples within a sequence generate interrupts.
29
END7
R/W
0
8th Sample is End of Sequence
Value Description
1
The eighth sample is the last sample of the sequence.
0
Another sample in the sequence is the final sample.
It is possible to end the sequence on any sample position. Software
must set an ENDn bit somewhere within the sequence. Samples defined
after the sample containing a set ENDn bit are not requested for
conversion even though the fields may be non-zero.
July 25, 2011
569
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
28
D7
R/W
0
Description
8th Sample Diff Input Select
Value Description
1
The analog input is differentially sampled. The corresponding
ADCSSMUXn nibble must be set to the pair number "i", where
the paired inputs are "2i and 2i+1".
0
The analog inputs are not differentially sampled.
Because the temperature sensor does not have a differential option,
this bit must not be set when the TS7 bit is set.
27
TS6
R/W
0
7th Sample Temp Sensor Select
Same definition as TS7 but used during the seventh sample.
26
IE6
R/W
0
7th Sample Interrupt Enable
Same definition as IE7 but used during the seventh sample.
25
END6
R/W
0
7th Sample is End of Sequence
Same definition as END7 but used during the seventh sample.
24
D6
R/W
0
7th Sample Diff Input Select
Same definition as D7 but used during the seventh sample.
23
TS5
R/W
0
6th Sample Temp Sensor Select
Same definition as TS7 but used during the sixth sample.
22
IE5
R/W
0
6th Sample Interrupt Enable
Same definition as IE7 but used during the sixth sample.
21
END5
R/W
0
6th Sample is End of Sequence
Same definition as END7 but used during the sixth sample.
20
D5
R/W
0
6th Sample Diff Input Select
Same definition as D7 but used during the sixth sample.
19
TS4
R/W
0
5th Sample Temp Sensor Select
Same definition as TS7 but used during the fifth sample.
18
IE4
R/W
0
5th Sample Interrupt Enable
Same definition as IE7 but used during the fifth sample.
17
END4
R/W
0
5th Sample is End of Sequence
Same definition as END7 but used during the fifth sample.
16
D4
R/W
0
5th Sample Diff Input Select
Same definition as D7 but used during the fifth sample.
15
TS3
R/W
0
4th Sample Temp Sensor Select
Same definition as TS7 but used during the fourth sample.
14
IE3
R/W
0
4th Sample Interrupt Enable
Same definition as IE7 but used during the fourth sample.
570
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
13
END3
R/W
0
Description
4th Sample is End of Sequence
Same definition as END7 but used during the fourth sample.
12
D3
R/W
0
4th Sample Diff Input Select
Same definition as D7 but used during the fourth sample.
11
TS2
R/W
0
3rd Sample Temp Sensor Select
Same definition as TS7 but used during the third sample.
10
IE2
R/W
0
3rd Sample Interrupt Enable
Same definition as IE7 but used during the third sample.
9
END2
R/W
0
3rd Sample is End of Sequence
Same definition as END7 but used during the third sample.
8
D2
R/W
0
3rd Sample Diff Input Select
Same definition as D7 but used during the third sample.
7
TS1
R/W
0
2nd Sample Temp Sensor Select
Same definition as TS7 but used during the second sample.
6
IE1
R/W
0
2nd Sample Interrupt Enable
Same definition as IE7 but used during the second sample.
5
END1
R/W
0
2nd Sample is End of Sequence
Same definition as END7 but used during the second sample.
4
D1
R/W
0
2nd Sample Diff Input Select
Same definition as D7 but used during the second sample.
3
TS0
R/W
0
1st Sample Temp Sensor Select
Same definition as TS7 but used during the first sample.
2
IE0
R/W
0
1st Sample Interrupt Enable
Same definition as IE7 but used during the first sample.
1
END0
R/W
0
1st Sample is End of Sequence
Same definition as END7 but used during the first sample.
0
D0
R/W
0
1st Sample Diff Input Select
Same definition as D7 but used during the first sample.
July 25, 2011
571
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 16: ADC Sample Sequence Result FIFO 0 (ADCSSFIFO0), offset 0x048
Register 17: ADC Sample Sequence Result FIFO 1 (ADCSSFIFO1), offset 0x068
Register 18: ADC Sample Sequence Result FIFO 2 (ADCSSFIFO2), offset 0x088
Register 19: ADC Sample Sequence Result FIFO 3 (ADCSSFIFO3), offset
0x0A8
Important: This register is read-sensitive. See the register description for details.
This register contains the conversion results for samples collected with the sample sequencer (the
ADCSSFIFO0 register is used for Sample Sequencer 0, ADCSSFIFO1 for Sequencer 1,
ADCSSFIFO2 for Sequencer 2, and ADCSSFIFO3 for Sequencer 3). Reads of this register return
conversion result data in the order sample 0, sample 1, and so on, until the FIFO is empty. If the
FIFO is not properly handled by software, overflow and underflow conditions are registered in the
ADCOSTAT and ADCUSTAT registers.
ADC Sample Sequence Result FIFO n (ADCSSFIFOn)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x048
Type RO, reset 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
5
4
3
2
1
0
RO
-
RO
-
RO
-
RO
-
RO
-
RO
-
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
reserved
Type
Reset
RO
0
RO
0
DATA
RO
0
RO
0
RO
-
RO
-
RO
-
Bit/Field
Name
Type
Reset
31:12
reserved
RO
0x0000.0
11:0
DATA
RO
-
RO
-
RO
-
RO
-
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Conversion Result Data
572
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 20: ADC Sample Sequence FIFO 0 Status (ADCSSFSTAT0), offset
0x04C
Register 21: ADC Sample Sequence FIFO 1 Status (ADCSSFSTAT1), offset
0x06C
Register 22: ADC Sample Sequence FIFO 2 Status (ADCSSFSTAT2), offset
0x08C
Register 23: ADC Sample Sequence FIFO 3 Status (ADCSSFSTAT3), offset
0x0AC
This register provides a window into the sample sequencer, providing full/empty status information
as well as the positions of the head and tail pointers. The reset value of 0x100 indicates an empty
FIFO with the head and tail pointers both pointing to index 0. The ADCSSFSTAT0 register provides
status on FIFO0, which has 8 entries; ADCSSFSTAT1 on FIFO1, which has 4 entries;
ADCSSFSTAT2 on FIFO2, which has 4 entries; and ADCSSFSTAT3 on FIFO3 which has a single
entry.
ADC Sample Sequence FIFO 0 Status (ADCSSFSTAT0)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x04C
Type RO, reset 0x0000.0100
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
RO
0
FULL
RO
0
RO
0
reserved
RO
0
RO
0
EMPTY
RO
0
Bit/Field
Name
Type
Reset
31:13
reserved
RO
0x0000.0
12
FULL
RO
0
RO
1
HPTR
TPTR
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
FIFO Full
Value Description
11:9
reserved
RO
0x0
8
EMPTY
RO
1
1
The FIFO is currently full.
0
The FIFO is not currently full.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
FIFO Empty
Value Description
1
The FIFO is currently empty.
0
The FIFO is not currently empty.
July 25, 2011
573
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
7:4
HPTR
RO
0x0
Description
FIFO Head Pointer
This field contains the current "head" pointer index for the FIFO, that is,
the next entry to be written.
Valid values are 0x0-0x7 for FIFO0; 0x0-0x3 for FIFO1 and FIFO2; and
0x0 for FIFO3.
3:0
TPTR
RO
0x0
FIFO Tail Pointer
This field contains the current "tail" pointer index for the FIFO, that is,
the next entry to be read.
Valid values are 0x0-0x7 for FIFO0; 0x0-0x3 for FIFO1 and FIFO2; and
0x0 for FIFO3.
574
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 24: ADC Sample Sequence 0 Operation (ADCSSOP0), offset 0x050
This register determines whether the sample from the given conversion on Sample Sequence 0 is
saved in the Sample Sequence FIFO0 or sent to the digital comparator unit.
ADC Sample Sequence 0 Operation (ADCSSOP0)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x050
Type R/W, reset 0x0000.0000
31
30
29
reserved
Type
Reset
27
S7DCOP
26
25
reserved
24
23
S6DCOP
22
21
reserved
20
19
S5DCOP
18
17
reserved
16
S4DCOP
RO
0
RO
0
RO
0
R/W
0
RO
0
RO
0
RO
0
R/W
0
RO
0
RO
0
RO
0
R/W
0
RO
0
RO
0
RO
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
reserved
Type
Reset
28
RO
0
RO
0
S3DCOP
RO
0
R/W
0
reserved
RO
0
RO
0
S2DCOP
RO
0
Bit/Field
Name
Type
Reset
31:29
reserved
RO
0x0
28
S7DCOP
R/W
0
R/W
0
reserved
RO
0
RO
0
S1DCOP
RO
0
R/W
0
reserved
RO
0
RO
0
S0DCOP
RO
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 7 Digital Comparator Operation
Value Description
27:25
reserved
RO
0x0
24
S6DCOP
R/W
0
1
The eighth sample is sent to the digital comparator unit specified
by the S7DCSEL bit in the ADCSSDC0 register, and the value
is not written to the FIFO.
0
The eighth sample is saved in Sample Sequence FIFO0.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 6 Digital Comparator Operation
Same definition as S7DCOP but used during the seventh sample.
23:21
reserved
RO
0x0
20
S5DCOP
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 5 Digital Comparator Operation
Same definition as S7DCOP but used during the sixth sample.
19:17
reserved
RO
0x0
16
S4DCOP
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 4 Digital Comparator Operation
Same definition as S7DCOP but used during the fifth sample.
15:13
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
575
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
12
S3DCOP
R/W
0
Description
Sample 3 Digital Comparator Operation
Same definition as S7DCOP but used during the fourth sample.
11:9
reserved
RO
0x0
8
S2DCOP
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 2 Digital Comparator Operation
Same definition as S7DCOP but used during the third sample.
7:5
reserved
RO
0x0
4
S1DCOP
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 1 Digital Comparator Operation
Same definition as S7DCOP but used during the second sample.
3:1
reserved
RO
0x0
0
S0DCOP
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 0 Digital Comparator Operation
Same definition as S7DCOP but used during the first sample.
576
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 25: ADC Sample Sequence 0 Digital Comparator Select (ADCSSDC0),
offset 0x054
This register determines which digital comparator receives the sample from the given conversion
on Sample Sequence 0, if the corresponding SnDCOP bit in the ADCSSOP0 register is set.
ADC Sample Sequence 0 Digital Comparator Select (ADCSSDC0)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x054
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
S7DCSEL
Type
Reset
24
23
22
21
20
19
S5DCSEL
18
17
16
S4DCSEL
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
S3DCSEL
Type
Reset
25
S6DCSEL
R/W
0
R/W
0
S2DCSEL
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
31:28
S7DCSEL
R/W
0x0
S1DCSEL
R/W
0
R/W
0
R/W
0
R/W
0
S0DCSEL
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Sample 7 Digital Comparator Select
When the S7DCOP bit in the ADCSSOP0 register is set, this field
indicates which digital comparator unit (and its associated set of control
registers) receives the eighth sample from Sample Sequencer 0.
Note:
Values not listed are reserved.
Value Description
27:24
S6DCSEL
R/W
0x0
0x0
Digital Comparator Unit 0 (ADCDCCMP0 and ADCDCCTL0)
0x1
Digital Comparator Unit 1 (ADCDCCMP1 and ADCDCCTL1)
0x2
Digital Comparator Unit 2 (ADCDCCMP2 and ADCDCCTL2)
0x3
Digital Comparator Unit 3 (ADCDCCMP3 and ADCDCCTL3)
0x4
Digital Comparator Unit 4 (ADCDCCMP4 and ADCDCCTL4)
0x5
Digital Comparator Unit 5 (ADCDCCMP5 and ADCDCCTL5)
0x6
Digital Comparator Unit 6 (ADCDCCMP6 and ADCDCCTL6)
0x7
Digital Comparator Unit 7 (ADCDCCMP7 and ADCDCCTL7)
Sample 6 Digital Comparator Select
This field has the same encodings as S7DCSEL but is used during the
seventh sample.
23:20
S5DCSEL
R/W
0x0
Sample 5 Digital Comparator Select
This field has the same encodings as S7DCSEL but is used during the
sixth sample.
19:16
S4DCSEL
R/W
0x0
Sample 4 Digital Comparator Select
This field has the same encodings as S7DCSEL but is used during the
fifth sample.
15:12
S3DCSEL
R/W
0x0
Sample 3 Digital Comparator Select
This field has the same encodings as S7DCSEL but is used during the
fourth sample.
July 25, 2011
577
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
11:8
S2DCSEL
R/W
0x0
Description
Sample 2 Digital Comparator Select
This field has the same encodings as S7DCSEL but is used during the
third sample.
7:4
S1DCSEL
R/W
0x0
Sample 1 Digital Comparator Select
This field has the same encodings as S7DCSEL but is used during the
second sample.
3:0
S0DCSEL
R/W
0x0
Sample 0 Digital Comparator Select
This field has the same encodings as S7DCSEL but is used during the
first sample.
578
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 26: ADC Sample Sequence Input Multiplexer Select 1 (ADCSSMUX1),
offset 0x060
Register 27: ADC Sample Sequence Input Multiplexer Select 2 (ADCSSMUX2),
offset 0x080
This register defines the analog input configuration for each sample in a sequence executed with
Sample Sequencer 1 or 2. These registers are 16 bits wide and contain information for four possible
samples. See the ADCSSMUX0 register on page 567 for detailed bit descriptions. The ADCSSMUX1
register affects Sample Sequencer 1 and the ADCSSMUX2 register affects Sample Sequencer 2.
ADC Sample Sequence Input Multiplexer Select 1 (ADCSSMUX1)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x060
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
MUX3
Type
Reset
MUX2
MUX1
MUX0
Bit/Field
Name
Type
Reset
Description
31:16
reserved
RO
0x0000
15:12
MUX3
R/W
0x0
4th Sample Input Select
11:8
MUX2
R/W
0x0
3rd Sample Input Select
7:4
MUX1
R/W
0x0
2nd Sample Input Select
3:0
MUX0
R/W
0x0
1st Sample Input Select
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
579
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 28: ADC Sample Sequence Control 1 (ADCSSCTL1), offset 0x064
Register 29: ADC Sample Sequence Control 2 (ADCSSCTL2), offset 0x084
These registers contain the configuration information for each sample for a sequence executed with
Sample Sequencer 1 or 2. When configuring a sample sequence, the END bit must be set for the
final sample, whether it be after the first sample, fourth sample, or any sample in between. These
registers are 16-bits wide and contain information for four possible samples. See the ADCSSCTL0
register on page 569 for detailed bit descriptions. The ADCSSCTL1 register configures Sample
Sequencer 1 and the ADCSSCTL2 register configures Sample Sequencer 2.
ADC Sample Sequence Control 1 (ADCSSCTL1)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x064
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
TS3
IE3
END3
D3
TS2
IE2
END2
D2
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
TS1
IE1
END1
D1
TS0
IE0
END0
D0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
Type
Reset
Bit/Field
Name
Type
Reset
31:16
reserved
RO
0x0000
15
TS3
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
4th Sample Temp Sensor Select
Same definition as TS7 but used during the fourth sample.
14
IE3
R/W
0
4th Sample Interrupt Enable
Same definition as IE7 but used during the fourth sample.
13
END3
R/W
0
4th Sample is End of Sequence
Same definition as END7 but used during the fourth sample.
12
D3
R/W
0
4th Sample Diff Input Select
Same definition as D7 but used during the fourth sample.
11
TS2
R/W
0
3rd Sample Temp Sensor Select
Same definition as TS7 but used during the third sample.
10
IE2
R/W
0
3rd Sample Interrupt Enable
Same definition as IE7 but used during the third sample.
9
END2
R/W
0
3rd Sample is End of Sequence
Same definition as END7 but used during the third sample.
8
D2
R/W
0
3rd Sample Diff Input Select
Same definition as D7 but used during the third sample.
580
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
7
TS1
R/W
0
Description
2nd Sample Temp Sensor Select
Same definition as TS7 but used during the second sample.
6
IE1
R/W
0
2nd Sample Interrupt Enable
Same definition as IE7 but used during the second sample.
5
END1
R/W
0
2nd Sample is End of Sequence
Same definition as END7 but used during the second sample.
4
D1
R/W
0
2nd Sample Diff Input Select
Same definition as D7 but used during the second sample.
3
TS0
R/W
0
1st Sample Temp Sensor Select
Same definition as TS7 but used during the first sample.
2
IE0
R/W
0
1st Sample Interrupt Enable
Same definition as IE7 but used during the first sample.
1
END0
R/W
0
1st Sample is End of Sequence
Same definition as END7 but used during the first sample.
0
D0
R/W
0
1st Sample Diff Input Select
Same definition as D7 but used during the first sample.
July 25, 2011
581
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 30: ADC Sample Sequence 1 Operation (ADCSSOP1), offset 0x070
Register 31: ADC Sample Sequence 2 Operation (ADCSSOP2), offset 0x090
This register determines whether the sample from the given conversion on Sample Sequence n is
saved in the Sample Sequence n FIFO or sent to the digital comparator unit. The ADCSSOP1
register controls Sample Sequencer 1 and the ADCSSOP2 register controls Sample Sequencer 2.
ADC Sample Sequence 1 Operation (ADCSSOP1)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x070
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
RO
0
S3DCOP
RO
0
R/W
0
reserved
RO
0
RO
0
S2DCOP
RO
0
Bit/Field
Name
Type
Reset
31:13
reserved
RO
0x0000.0
12
S3DCOP
R/W
0
R/W
0
reserved
RO
0
RO
0
S1DCOP
RO
0
R/W
0
reserved
RO
0
RO
0
S0DCOP
RO
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 3 Digital Comparator Operation
Value Description
11:9
reserved
RO
0x0
8
S2DCOP
R/W
0
1
The fourth sample is sent to the digital comparator unit specified
by the S3DCSEL bit in the ADCSSDC0n register, and the value
is not written to the FIFO.
0
The fourth sample is saved in Sample Sequence FIFOn.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 2 Digital Comparator Operation
Same definition as S3DCOP but used during the third sample.
7:5
reserved
RO
0x0
4
S1DCOP
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 1 Digital Comparator Operation
Same definition as S3DCOP but used during the second sample.
3:1
reserved
RO
0x0
0
S0DCOP
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 0 Digital Comparator Operation
Same definition as S3DCOP but used during the first sample.
582
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 32: ADC Sample Sequence 1 Digital Comparator Select (ADCSSDC1),
offset 0x074
Register 33: ADC Sample Sequence 2 Digital Comparator Select (ADCSSDC2),
offset 0x094
These registers determine which digital comparator receives the sample from the given conversion
on Sample Sequence n if the corresponding SnDCOP bit in the ADCSSOPn register is set. The
ADCSSDC1 register controls the selection for Sample Sequencer 1 and the ADCSSDC2 register
controls the selection for Sample Sequencer 2.
ADC Sample Sequence 1 Digital Comparator Select (ADCSSDC1)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x074
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
S3DCSEL
Type
Reset
S2DCSEL
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
31:16
reserved
RO
0x0000
15:12
S3DCSEL
R/W
0x0
S1DCSEL
R/W
0
S0DCSEL
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 3 Digital Comparator Select
When the S3DCOP bit in the ADCSSOPn register is set, this field
indicates which digital comparator unit (and its associated set of control
registers) receives the eighth sample from Sample Sequencer n.
Note:
Values not listed are reserved.
Value Description
11:8
S2DCSEL
R/W
0x0
0x0
Digital Comparator Unit 0 (ADCDCCMP0 and ADCCCTL0)
0x1
Digital Comparator Unit 1 (ADCDCCMP1 and ADCCCTL1)
0x2
Digital Comparator Unit 2 (ADCDCCMP2 and ADCCCTL2)
0x3
Digital Comparator Unit 3 (ADCDCCMP3 and ADCCCTL3)
0x4
Digital Comparator Unit 4 (ADCDCCMP4 and ADCCCTL4)
0x5
Digital Comparator Unit 5 (ADCDCCMP5 and ADCCCTL5)
0x6
Digital Comparator Unit 6 (ADCDCCMP6 and ADCCCTL6)
0x7
Digital Comparator Unit 7 (ADCDCCMP7 and ADCCCTL7)
Sample 2 Digital Comparator Select
This field has the same encodings as S3DCSEL but is used during the
third sample.
July 25, 2011
583
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
7:4
S1DCSEL
R/W
0x0
Description
Sample 1 Digital Comparator Select
This field has the same encodings as S3DCSEL but is used during the
second sample.
3:0
S0DCSEL
R/W
0x0
Sample 0 Digital Comparator Select
This field has the same encodings as S3DCSEL but is used during the
first sample.
584
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 34: ADC Sample Sequence Input Multiplexer Select 3 (ADCSSMUX3),
offset 0x0A0
This register defines the analog input configuration for the sample executed with Sample Sequencer
3. This register is 4 bits wide and contains information for one possible sample. See the ADCSSMUX0
register on page 567 for detailed bit descriptions.
ADC Sample Sequence Input Multiplexer Select 3 (ADCSSMUX3)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x0A0
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
1
0
R/W
0
R/W
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
MUX0
RO
0
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
3:0
MUX0
R/W
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
1st Sample Input Select
July 25, 2011
585
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 35: ADC Sample Sequence Control 3 (ADCSSCTL3), offset 0x0A4
This register contains the configuration information for a sample executed with Sample Sequencer
3. The END0 bit is always set as this sequencer can execute only one sample. This register is 4 bits
wide and contains information for one possible sample. See the ADCSSCTL0 register on page 569
for detailed bit descriptions.
ADC Sample Sequence Control 3 (ADCSSCTL3)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x0A4
Type R/W, reset 0x0000.0002
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
TS0
IE0
END0
D0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
1
R/W
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
3
TS0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
1st Sample Temp Sensor Select
Same definition as TS7 but used during the first sample.
2
IE0
R/W
0
1st Sample Interrupt Enable
Same definition as IE7 but used during the first sample.
1
END0
R/W
1
1st Sample is End of Sequence
Same definition as END7 but used during the first sample.
Because this sequencer has only one entry, this bit must be set.
0
D0
R/W
0
1st Sample Diff Input Select
Same definition as D7 but used during the first sample.
586
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 36: ADC Sample Sequence 3 Operation (ADCSSOP3), offset 0x0B0
This register determines whether the sample from the given conversion on Sample Sequence 3 is
saved in the Sample Sequence 3 FIFO or sent to the digital comparator unit.
ADC Sample Sequence 3 Operation (ADCSSOP3)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x0B0
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:1
reserved
RO
0x0000.000
0
S0DCOP
R/W
0
RO
0
S0DCOP
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 0 Digital Comparator Operation
Value Description
1
The sample is sent to the digital comparator unit specified by
the S0DCSEL bit in the ADCSSDC03 register, and the value is
not written to the FIFO.
0
The sample is saved in Sample Sequence FIFO3.
July 25, 2011
587
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 37: ADC Sample Sequence 3 Digital Comparator Select (ADCSSDC3),
offset 0x0B4
This register determines which digital comparator receives the sample from the given conversion
on Sample Sequence 3 if the corresponding SnDCOP bit in the ADCSSOP3 register is set.
ADC Sample Sequence 3 Digital Comparator Select (ADCSSDC3)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x0B4
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
3:0
S0DCSEL
R/W
0x0
S0DCSEL
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sample 0 Digital Comparator Select
When the S0DCOP bit in the ADCSSOP3 register is set, this field
indicates which digital comparator unit (and its associated set of control
registers) receives the sample from Sample Sequencer 3.
Note:
Values not listed are reserved.
Value Description
0x0
Digital Comparator Unit 0 (ADCDCCMP0 and ADCCCTL0)
0x1
Digital Comparator Unit 1 (ADCDCCMP1 and ADCCCTL1)
0x2
Digital Comparator Unit 2 (ADCDCCMP2 and ADCCCTL2)
0x3
Digital Comparator Unit 3 (ADCDCCMP3 and ADCCCTL3)
0x4
Digital Comparator Unit 4 (ADCDCCMP4 and ADCCCTL4)
0x5
Digital Comparator Unit 5 (ADCDCCMP5 and ADCCCTL5)
0x6
Digital Comparator Unit 6 (ADCDCCMP6 and ADCCCTL6)
0x7
Digital Comparator Unit 7 (ADCDCCMP7 and ADCCCTL7)
588
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 38: ADC Digital Comparator Reset Initial Conditions (ADCDCRIC),
offset 0xD00
This register provides the ability to reset any of the digital comparator interrupt or trigger functions
back to their initial conditions. Resetting these functions ensures that the data that is being used by
the interrupt and trigger functions in the digital comparator unit is not stale.
ADC Digital Comparator Reset Initial Conditions (ADCDCRIC)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0xD00
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
DCTRIG7 DCTRIG6 DCTRIG5 DCTRIG4 DCTRIG3 DCTRIG2 DCTRIG1 DCTRIG0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
7
6
5
4
3
2
1
0
DCINT7
DCINT6
DCINT5
DCINT4
DCINT3
DCINT2
DCINT1
DCINT0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:24
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
23
DCTRIG7
R/W
0
Digital Comparator Trigger 7
Value Description
1
Resets the Digital Comparator 7 trigger unit to its initial
conditions.
0
No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used. After setting this bit, software
should wait until the bit clears before continuing.
22
DCTRIG6
R/W
0
Digital Comparator Trigger 6
Value Description
1
Resets the Digital Comparator 6 trigger unit to its initial
conditions.
0
No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used.
July 25, 2011
589
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
21
DCTRIG5
R/W
0
Description
Digital Comparator Trigger 5
Value Description
1
Resets the Digital Comparator 5 trigger unit to its initial
conditions.
0
No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used.
20
DCTRIG4
R/W
0
Digital Comparator Trigger 4
Value Description
1
Resets the Digital Comparator 4 trigger unit to its initial
conditions.
0
No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used.
19
DCTRIG3
R/W
0
Digital Comparator Trigger 3
Value Description
1
Resets the Digital Comparator 3 trigger unit to its initial
conditions.
0
No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used.
18
DCTRIG2
R/W
0
Digital Comparator Trigger 2
Value Description
1
Resets the Digital Comparator 2 trigger unit to its initial
conditions.
0
No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used.
590
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
17
DCTRIG1
R/W
0
Description
Digital Comparator Trigger 1
Value Description
1
Resets the Digital Comparator 1 trigger unit to its initial
conditions.
0
No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used.
16
DCTRIG0
R/W
0
Digital Comparator Trigger 0
Value Description
1
Resets the Digital Comparator 0 trigger unit to its initial
conditions.
0
No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used.
15:8
reserved
RO
0x00
7
DCINT7
R/W
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Digital Comparator Interrupt 7
Value Description
1
Resets the Digital Comparator 7 interrupt unit to its initial
conditions.
0
No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
6
DCINT6
R/W
0
Digital Comparator Interrupt 6
Value Description
1
Resets the Digital Comparator 6 interrupt unit to its initial
conditions.
0
No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
July 25, 2011
591
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Bit/Field
Name
Type
Reset
5
DCINT5
R/W
0
Description
Digital Comparator Interrupt 5
Value Description
1
Resets the Digital Comparator 5 interrupt unit to its initial
conditions.
0
No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
4
DCINT4
R/W
0
Digital Comparator Interrupt 4
Value Description
1
Resets the Digital Comparator 4 interrupt unit to its initial
conditions.
0
No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
3
DCINT3
R/W
0
Digital Comparator Interrupt 3
Value Description
1
Resets the Digital Comparator 3 interrupt unit to its initial
conditions.
0
No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
2
DCINT2
R/W
0
Digital Comparator Interrupt 2
Value Description
1
Resets the Digital Comparator 2 interrupt unit to its initial
conditions.
0
No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
592
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
1
DCINT1
R/W
0
Description
Digital Comparator Interrupt 1
Value Description
1
Resets the Digital Comparator 1 interrupt unit to its initial
conditions.
0
No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
0
DCINT0
R/W
0
Digital Comparator Interrupt 0
Value Description
1
Resets the Digital Comparator 0 interrupt unit to its initial
conditions.
0
No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
July 25, 2011
593
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 39: ADC Digital Comparator Control 0 (ADCDCCTL0), offset 0xE00
Register 40: ADC Digital Comparator Control 1 (ADCDCCTL1), offset 0xE04
Register 41: ADC Digital Comparator Control 2 (ADCDCCTL2), offset 0xE08
Register 42: ADC Digital Comparator Control 3 (ADCDCCTL3), offset 0xE0C
Register 43: ADC Digital Comparator Control 4 (ADCDCCTL4), offset 0xE10
Register 44: ADC Digital Comparator Control 5 (ADCDCCTL5), offset 0xE14
Register 45: ADC Digital Comparator Control 6 (ADCDCCTL6), offset 0xE18
Register 46: ADC Digital Comparator Control 7 (ADCDCCTL7), offset 0xE1C
This register provides the comparison encodings that generate an interrupt.
ADC Digital Comparator Control 0 (ADCDCCTL0)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0xE00
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
CIE
Bit/Field
Name
Type
Reset
31:5
reserved
RO
0x0000.0
4
CIE
R/W
0
CIC
R/W
0
CIM
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Comparison Interrupt Enable
Value Description
1
Enables the comparison interrupt. The ADC conversion data is
used to determine if an interrupt should be generated according
to the programming of the CIC and CIM fields.
0
Disables the comparison interrupt. ADC conversion data has
no effect on interrupt generation.
594
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
3:2
CIC
R/W
0x0
Description
Comparison Interrupt Condition
This field specifies the operational region in which an interrupt is
generated when the ADC conversion data is compared against the
values of COMP0 and COMP1. The COMP0 and COMP1 fields are defined
in the ADCDCCMPx registers.
Value Description
0x0
Low Band
ADC Data < COMP0 ≤ COMP1
0x1
Mid Band
COMP0 ≤ ADC Data < COMP1
0x2
reserved
0x3
High Band
COMP0 < COMP1 ≤ ADC Data
1:0
CIM
R/W
0x0
Comparison Interrupt Mode
This field specifies the mode by which the interrupt comparison is made.
Value Description
0x0
Always
This mode generates an interrupt every time the ADC conversion
data falls within the selected operational region.
0x1
Once
This mode generates an interrupt the first time that the ADC
conversion data enters the selected operational region.
0x2
Hysteresis Always
This mode generates an interrupt when the ADC conversion
data falls within the selected operational region and continues
to generate the interrupt until the hysteresis condition is cleared
by entering the opposite operational region.
0x3
Hysteresis Once
This mode generates an interrupt the first time that the ADC
conversion data falls within the selected operational region. No
additional interrupts are generated until the hysteresis condition
is cleared by entering the opposite operational region.
July 25, 2011
595
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
Register 47: ADC Digital Comparator Range 0 (ADCDCCMP0), offset 0xE40
Register 48: ADC Digital Comparator Range 1 (ADCDCCMP1), offset 0xE44
Register 49: ADC Digital Comparator Range 2 (ADCDCCMP2), offset 0xE48
Register 50: ADC Digital Comparator Range 3 (ADCDCCMP3), offset 0xE4C
Register 51: ADC Digital Comparator Range 4 (ADCDCCMP4), offset 0xE50
Register 52: ADC Digital Comparator Range 5 (ADCDCCMP5), offset 0xE54
Register 53: ADC Digital Comparator Range 6 (ADCDCCMP6), offset 0xE58
Register 54: ADC Digital Comparator Range 7 (ADCDCCMP7), offset 0xE5C
This register defines the comparison values that are used to determine if the ADC conversion data
falls in the appropriate operating region.
Note:
The value in the COMP1 field must be greater than or equal to the value in the COMP0 field
or unexpected results can occur.
If the RES bit in the ADCCTL register is clear, selecting 10-bit resolution, use only bits [25:16]
in the COMP1 field and bits [9:0] in the COMP0 field; otherwise unexpected results can occur.
ADC Digital Comparator Range 0 (ADCDCCMP0)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0xE40
Type R/W, reset 0x0000.0000
31
30
RO
0
RO
0
15
14
RO
0
RO
0
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
COMP1
reserved
Type
Reset
COMP0
RO
0
Bit/Field
Name
Type
Reset
31:28
reserved
RO
0x0
27:16
COMP1
R/W
0x000
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Compare 1
The value in this field is compared against the ADC conversion data.
The result of the comparison is used to determine if the data lies within
the high-band region.
Note that the value of COMP1 must be greater than or equal to the value
of COMP0.
15:12
reserved
RO
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
596
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
Description
11:0
COMP0
R/W
0x000
Compare 0
The value in this field is compared against the ADC conversion data.
The result of the comparison is used to determine if the data lies within
the low-band region.
July 25, 2011
597
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
13
Universal Asynchronous Receivers/Transmitters
(UARTs)
®
The Stellaris LM3S1G58 controller includes three Universal Asynchronous Receiver/Transmitter
(UART) with the following features:
■ Programmable baud-rate generator allowing speeds up to 5 Mbps for regular speed (divide by
16) and 10 Mbps for high speed (divide by 8)
■ Separate 16x8 transmit (TX) and receive (RX) FIFOs to reduce CPU interrupt service loading
■ Programmable FIFO length, including 1-byte deep operation providing conventional
double-buffered interface
■ FIFO trigger levels of 1/8, 1/4, 1/2, 3/4, and 7/8
■ Standard asynchronous communication bits for start, stop, and parity
■ Line-break generation and detection
■ Fully programmable serial interface characteristics
– 5, 6, 7, or 8 data bits
– Even, odd, stick, or no-parity bit generation/detection
– 1 or 2 stop bit generation
■ IrDA serial-IR (SIR) encoder/decoder providing
– Programmable use of IrDA Serial Infrared (SIR) or UART input/output
– Support of IrDA SIR encoder/decoder functions for data rates up to 115.2 Kbps half-duplex
– Support of normal 3/16 and low-power (1.41-2.23 μs) bit durations
– Programmable internal clock generator enabling division of reference clock by 1 to 256 for
low-power mode bit duration
■ Support for communication with ISO 7816 smart cards
■ Full modem handshake support (on UART1)
■ LIN protocol support
■ Standard FIFO-level and End-of-Transmission interrupts
■ Efficient transfers using Micro Direct Memory Access Controller (µDMA)
– Separate channels for transmit and receive
– Receive single request asserted when data is in the FIFO; burst request asserted at
programmed FIFO level
598
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
– Transmit single request asserted when there is space in the FIFO; burst request asserted at
programmed FIFO level
13.1
Block Diagram
Figure 13-1. UART Module Block Diagram
System Clock
DMA Request
DMA Control
UARTDMACTL
Interrupt
Interrupt Control
Identification
Registers
UARTPCellID0
UARTPCellID1
UARTPCellID2
UARTPCellID3
UARTPeriphID0
UARTPeriphID1
UARTPeriphID2
UARTPeriphID3
UARTPeriphID4
UARTPeriphID5
UARTPeriphID6
UARTPeriphID7
13.2
UARTIFLS
UARTIM
UARTMIS
UARTRIS
UARTICR
TxFIFO
16 x 8
.
.
.
Baud Rate
Generator
UARTDR
UARTRSR/ECR
UARTFR
UARTLCRH
UARTCTL
UARTILPR
UARTLCTL
UARTLSS
UARTLTIM
UnTx
UARTIBRD
UARTFBRD
Control/Status
Transmitter
(with SIR
Transmit
Encoder)
RxFIFO
16 x 8
Receiver
(with SIR
Receive
Decoder)
UnRx
.
.
.
Signal Description
The following table lists the external signals of the UART module and describes the function of each.
The UART signals are alternate functions for some GPIO signals and default to be GPIO signals at
reset, with the exception of the U0Rx and U0Tx pins which default to the UART function. The column
in the table below titled "Pin Mux/Pin Assignment" lists the possible GPIO pin placements for these
UART signals. The AFSEL bit in the GPIO Alternate Function Select (GPIOAFSEL) register
(page 418) should be set to choose the UART function. The number in parentheses is the encoding
that must be programmed into the PMCn field in the GPIO Port Control (GPIOPCTL) register
(page 435) to assign the UART signal to the specified GPIO port pin. For more information on
configuring GPIOs, see “General-Purpose Input/Outputs (GPIOs)” on page 395.
July 25, 2011
599
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Table 13-1. Signals for UART (100LQFP)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
U0Rx
26
PA0 (1)
I
TTL
UART module 0 receive. When in IrDA mode, this
signal has IrDA modulation.
U0Tx
27
PA1 (1)
O
TTL
UART module 0 transmit. When in IrDA mode, this
signal has IrDA modulation.
U1DSR
47
PF0 (9)
I
TTL
UART module 1 Data Set Ready modem output
control line.
U1Rx
10
12
23
26
66
92
PD0 (5)
PD2 (1)
PC6 (5)
PA0 (9)
PB0 (5)
PB4 (7)
I
TTL
UART module 1 receive. When in IrDA mode, this
signal has IrDA modulation.
U1Tx
11
13
22
27
67
91
PD1 (5)
PD3 (1)
PC7 (5)
PA1 (9)
PB1 (5)
PB5 (7)
O
TTL
UART module 1 transmit. When in IrDA mode, this
signal has IrDA modulation.
U2Rx
10
19
92
96
PD0 (4)
PG0 (1)
PB4 (4)
PD5 (9)
I
TTL
UART module 2 receive. When in IrDA mode, this
signal has IrDA modulation.
U2Tx
6
11
18
99
PE4 (5)
PD1 (4)
PG1 (1)
PD6 (9)
O
TTL
UART module 2 transmit. When in IrDA mode, this
signal has IrDA modulation.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 13-2. Signals for UART (108BGA)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
U0Rx
L3
PA0 (1)
I
TTL
UART module 0 receive. When in IrDA mode, this
signal has IrDA modulation.
U0Tx
M3
PA1 (1)
O
TTL
UART module 0 transmit. When in IrDA mode, this
signal has IrDA modulation.
U1DSR
M9
PF0 (9)
I
TTL
UART module 1 Data Set Ready modem output
control line.
U1Rx
G1
H2
M2
L3
E12
A6
PD0 (5)
PD2 (1)
PC6 (5)
PA0 (9)
PB0 (5)
PB4 (7)
I
TTL
UART module 1 receive. When in IrDA mode, this
signal has IrDA modulation.
U1Tx
G2
H1
L2
M3
D12
B7
PD1 (5)
PD3 (1)
PC7 (5)
PA1 (9)
PB1 (5)
PB5 (7)
O
TTL
UART module 1 transmit. When in IrDA mode, this
signal has IrDA modulation.
600
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 13-2. Signals for UART (108BGA) (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
U2Rx
G1
K1
A6
B4
PD0 (4)
PG0 (1)
PB4 (4)
PD5 (9)
I
TTL
UART module 2 receive. When in IrDA mode, this
signal has IrDA modulation.
U2Tx
B2
G2
K2
A3
PE4 (5)
PD1 (4)
PG1 (1)
PD6 (9)
O
TTL
UART module 2 transmit. When in IrDA mode, this
signal has IrDA modulation.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
13.3
Functional Description
Each Stellaris UART performs the functions of parallel-to-serial and serial-to-parallel conversions.
It is similar in functionality to a 16C550 UART, but is not register compatible.
The UART is configured for transmit and/or receive via the TXE and RXE bits of the UART Control
(UARTCTL) register (see page 625). Transmit and receive are both enabled out of reset. Before any
control registers are programmed, the UART must be disabled by clearing the UARTEN bit in
UARTCTL. If the UART is disabled during a TX or RX operation, the current transaction is completed
prior to the UART stopping.
The UART module also includes a serial IR (SIR) encoder/decoder block that can be connected to
an infrared transceiver to implement an IrDA SIR physical layer. The SIR function is programmed
using the UARTCTL register.
13.3.1
Transmit/Receive Logic
The transmit logic performs parallel-to-serial conversion on the data read from the transmit FIFO.
The control logic outputs the serial bit stream beginning with a start bit and followed by the data bits
(LSB first), parity bit, and the stop bits according to the programmed configuration in the control
registers. See Figure 13-2 on page 601 for details.
The receive logic performs serial-to-parallel conversion on the received bit stream after a valid start
pulse has been detected. Overrun, parity, frame error checking, and line-break detection are also
performed, and their status accompanies the data that is written to the receive FIFO.
Figure 13-2. UART Character Frame
UnTX
LSB
1
5-8 data bits
0
n
Parity bit
if enabled
Start
13.3.2
1-2
stop bits
MSB
Baud-Rate Generation
The baud-rate divisor is a 22-bit number consisting of a 16-bit integer and a 6-bit fractional part.
The number formed by these two values is used by the baud-rate generator to determine the bit
period. Having a fractional baud-rate divider allows the UART to generate all the standard baud
rates.
The 16-bit integer is loaded through the UART Integer Baud-Rate Divisor (UARTIBRD) register
(see page 621) and the 6-bit fractional part is loaded with the UART Fractional Baud-Rate Divisor
July 25, 2011
601
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
(UARTFBRD) register (see page 622). The baud-rate divisor (BRD) has the following relationship
to the system clock (where BRDI is the integer part of the BRD and BRDF is the fractional part,
separated by a decimal place.)
BRD = BRDI + BRDF = UARTSysClk / (ClkDiv * Baud Rate)
where UARTSysClk is the system clock connected to the UART, and ClkDiv is either 16 (if HSE
in UARTCTL is clear) or 8 (if HSE is set).
The 6-bit fractional number (that is to be loaded into the DIVFRAC bit field in the UARTFBRD register)
can be calculated by taking the fractional part of the baud-rate divisor, multiplying it by 64, and
adding 0.5 to account for rounding errors:
UARTFBRD[DIVFRAC] = integer(BRDF * 64 + 0.5)
The UART generates an internal baud-rate reference clock at 8x or 16x the baud-rate (referred to
as Baud8 and Baud16, depending on the setting of the HSE bit (bit 5) in UARTCTL). This reference
clock is divided by 8 or 16 to generate the transmit clock, and is used for error detection during
receive operations. Note that the state of the HSE bit has no effect on clock generation in ISO 7816
smart card mode (when the SMART bit in the UARTCTL register is set).
Along with the UART Line Control, High Byte (UARTLCRH) register (see page 623), the UARTIBRD
and UARTFBRD registers form an internal 30-bit register. This internal register is only updated
when a write operation to UARTLCRH is performed, so any changes to the baud-rate divisor must
be followed by a write to the UARTLCRH register for the changes to take effect.
To update the baud-rate registers, there are four possible sequences:
■ UARTIBRD write, UARTFBRD write, and UARTLCRH write
■ UARTFBRD write, UARTIBRD write, and UARTLCRH write
■ UARTIBRD write and UARTLCRH write
■ UARTFBRD write and UARTLCRH write
13.3.3
Data Transmission
Data received or transmitted is stored in two 16-byte FIFOs, though the receive FIFO has an extra
four bits per character for status information. For transmission, data is written into the transmit FIFO.
If the UART is enabled, it causes a data frame to start transmitting with the parameters indicated
in the UARTLCRH register. Data continues to be transmitted until there is no data left in the transmit
FIFO. The BUSY bit in the UART Flag (UARTFR) register (see page 617) is asserted as soon as
data is written to the transmit FIFO (that is, if the FIFO is non-empty) and remains asserted while
data is being transmitted. The BUSY bit is negated only when the transmit FIFO is empty, and the
last character has been transmitted from the shift register, including the stop bits. The UART can
indicate that it is busy even though the UART may no longer be enabled.
When the receiver is idle (the UnRx signal is continuously 1), and the data input goes Low (a start
bit has been received), the receive counter begins running and data is sampled on the eighth cycle
of Baud16 or fourth cycle of Baud8 depending on the setting of the HSE bit (bit 5) in UARTCTL
(described in “Transmit/Receive Logic” on page 601).
The start bit is valid and recognized if the UnRx signal is still low on the eighth cycle of Baud16 (HSE
clear) or the fourth cycle of Baud 8 (HSE set), otherwise it is ignored. After a valid start bit is detected,
successive data bits are sampled on every 16th cycle of Baud16 or 8th cycle of Baud8 (that is, one
bit period later) according to the programmed length of the data characters and value of the HSE
602
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
bit in UARTCTL. The parity bit is then checked if parity mode is enabled. Data length and parity are
defined in the UARTLCRH register.
Lastly, a valid stop bit is confirmed if the UnRx signal is High, otherwise a framing error has occurred.
When a full word is received, the data is stored in the receive FIFO along with any error bits
associated with that word.
13.3.4
Serial IR (SIR)
The UART peripheral includes an IrDA serial-IR (SIR) encoder/decoder block. The IrDA SIR block
provides functionality that converts between an asynchronous UART data stream and a half-duplex
serial SIR interface. No analog processing is performed on-chip. The role of the SIR block is to
provide a digital encoded output and decoded input to the UART. When enabled, the SIR block
uses the UnTx and UnRx pins for the SIR protocol. These signals should be connected to an infrared
transceiver to implement an IrDA SIR physical layer link. The SIR block can receive and transmit,
but it is only half-duplex so it cannot do both at the same time. Transmission must be stopped before
data can be received. The IrDA SIR physical layer specifies a minimum 10-ms delay between
transmission and reception.The SIR block has two modes of operation:
■ In normal IrDA mode, a zero logic level is transmitted as a high pulse of 3/16th duration of the
selected baud rate bit period on the output pin, while logic one levels are transmitted as a static
LOW signal. These levels control the driver of an infrared transmitter, sending a pulse of light
for each zero. On the reception side, the incoming light pulses energize the photo transistor base
of the receiver, pulling its output LOW and driving the UART input pin LOW.
■ In low-power IrDA mode, the width of the transmitted infrared pulse is set to three times the
period of the internally generated IrLPBaud16 signal (1.63 µs, assuming a nominal 1.8432 MHz
frequency) by changing the appropriate bit in the UARTCR register. See page 620 for more
information on IrDA low-power pulse-duration configuration.
Figure 13-3 on page 603 shows the UART transmit and receive signals, with and without IrDA
modulation.
Figure 13-3. IrDA Data Modulation
Data bits
Start
bit
UnTx
1
0
0
0
1
Stop
bit
0
0
1
1
1
UnTx with IrDA
3
16 Bit period
Bit period
UnRx with IrDA
UnRx
0
1
0
Start
1
0
0
1
1
Data bits
0
1
Stop
In both normal and low-power IrDA modes:
■ During transmission, the UART data bit is used as the base for encoding
■ During reception, the decoded bits are transferred to the UART receive logic
July 25, 2011
603
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
The IrDA SIR physical layer specifies a half-duplex communication link, with a minimum 10-ms
delay between transmission and reception. This delay must be generated by software because it
is not automatically supported by the UART. The delay is required because the infrared receiver
electronics might become biased or even saturated from the optical power coupled from the adjacent
transmitter LED. This delay is known as latency or receiver setup time.
13.3.5
ISO 7816 Support
The UART offers basic support to allow communication with an ISO 7816 smartcard. When bit 3
(SMART) of the UARTCTL register is set, the UnTx signal is used as a bit clock, and the UnRx signal
is used as the half-duplex communication line connected to the smartcard. A GPIO signal can be
used to generate the reset signal to the smartcard. The remaining smartcard signals should be
provided by the system design. The maximum clock rate in this mode is system clock / 16.
When using ISO 7816 mode, the UARTLCRH register must be set to transmit 8-bit words (WLEN
bits 6:5 configured to 0x3) with EVEN parity (PEN set and EPS set). In this mode, the UART
automatically uses 2 stop bits, and the STP2 bit of the UARTLCRH register is ignored.
If a parity error is detected during transmission, UnRx is pulled Low during the second stop bit. In
this case, the UART aborts the transmission, flushes the transmit FIFO and discards any data it
contains, and raises a parity error interrupt, allowing software to detect the problem and initiate
retransmission of the affected data. Note that the UART does not support automatic retransmission
in this case.
13.3.6
Modem Handshake Support
This section describes how to configure and use the modem flow control and status signals for
UART1 when connected as a DTE (data terminal equipment) or as a DCE (data communications
equipment). In general, a modem is a DCE and a computing device that connects to a modem is
the DTE.
13.3.6.1
Signaling
The status signals provided by UART1 differ based on whether the UART is used as a DTE or DCE.
When used as a DTE, the modem flow control and status signals are defined as:
■ U1CTS is Clear To Send
■ U1DSR is Data Set Ready
■ U1DCD is Data Carrier Detect
■ U1RI is Ring Indicator
■ U1RTS is Request To Send
■ U1DTR is Data Terminal Ready
When used as a DCE, the the modem flow control and status signals are defined as:
■ U1CTS is Request To Send
■ U1DSR is Data Terminal Ready
■ U1RTS is Clear To Send
604
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ U1DTR is Data Set Ready
Note that the support for DCE functions Data Carrier Detect and Ring Indicator are not provided. If
these signals are required, their function can be emulated by using a general-purpose I/O signal
and providing software support.
13.3.6.2
Flow Control
Flow control can be accomplished by either hardware or software. The following sections describe
the different methods.
Hardware Flow Control (RTS/CTS)
Hardware flow control between two devices is accomplished by connecting the U1RTS output to the
Clear-To-Send input on the receiving device, and connecting the Request-To-Send output on the
receiving device to the U1CTS input.
The U1CTS input controls the transmitter. The transmitter may only transmit data when the U1CTS
input is asserted. The U1RTS output signal indicates the state of the receive FIFO. U1CTS remains
asserted until the preprogrammed watermark level is reached, indicating that the Receive FIFO has
no space to store additional characters.
The UARTCTL register bits 15 (CTSEN) and 14 (RTSEN) specify the flow control mode as shown in
Table 13-3 on page 605.
Table 13-3. Flow Control Mode
Description
CTSEN
RTSEN
1
1
RTS and CTS flow control enabled
1
0
Only CTS flow control enabled
0
1
Only RTS flow control enabled
0
0
Both RTS and CTS flow control disabled
Note that when RTSEN is 1, software cannot modify the U1RTS output value through the UARTCTL
register Request to Send (RTS) bit, and the status of the RTS bit should be ignored.
Software Flow Control (Modem Status Interrupts)
Software flow control between two devices is accomplished by using interrupts to indicate the status
of the UART. Interrupts may be generated for the U1DSR, U1DCD, U1CTS, and U1RI signals using
bits 3:0 of the UARTIM register, respectively. The raw and masked interrupt status may be checked
using the UARTRIS and UARTMIS register. These interrupts may be cleared using the UARTICR
register.
13.3.7
LIN Support
The UART module offers hardware support for the LIN protocol as either a master or a slave. The
LIN mode is enabled by setting the LIN bit in the UARTCTL register. A LIN message is identified
by the use of a Sync Break at the beginning of the message. The Sync Break is a transmission of
a series of 0s. The Sync Break is followed by the Sync data field (0x55). Figure 13-4 on page 606
illustrates the structure of a LIN message.
July 25, 2011
605
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Figure 13-4. LIN Message
Message Frame
Header
Synch
Break
Synch Field
Response
Ident Field
Data
Field(s)
In-Frame
Response
Data Field
Checksum
Field
Interbyte
Space
The UART should be configured as followed to operate in LIN mode:
1. Configure the UART for 1 start bit, 8 data bits, no parity, and 1 stop bit. Enable the Transmit
FIFO.
2. Set the LIN bit in the UARTCTL register.
When preparing to send a LIN message, the TXFIFO should contain the Sync data (0x55) at FIFO
location 0 and the Identifier data at location 1, followed by the data to be transmitted, and with the
checksum in the final FIFO entry.
13.3.7.1
LIN Master
The UART is enabled to be the LIN master by setting the MASTER bit in the UARTLCTL register.
The length of the Sync Break is programmable using the BLEN field in the UARTLCTL register and
can be 13-16 bits (baud clock cycles).
13.3.7.2
LIN Slave
The LIN UART slave is required to adjust its baud rate to that of the LIN master. In slave mode, the
LIN UART recognizes the Sync Break, which must be at least 13 bits in duration. A timer is provided
to capture timing data on the 1st and 5th falling edges of the Sync field so that the baud rate can
be adjusted to match the master.
After detecting a Sync Break, the UART waits for the synchronization field. The first falling edge
generates an interrupt using the LME1RIS bit in the UARTRIS register, and the timer value is
captured and stored in the UARTLSS register (T1). On the fifth falling edge, a second interrupt is
generated using the LME5RIS bit in the UARTRIS register, and the timer value is captured again
(T2). The actual baud rate can be calculated using (T2-T1)/8, and the local baud rate should be
adjusted as needed. Figure 13-5 on page 607 illustrates the synchronization field.
606
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 13-5. LIN Synchronization Field
Sync Break
0
1
2
3
4
5
6
7
8
Synch Field
9
10
11
12
13
0
1
2
Edge 1
3
4
5
6
Edge 5
7
8
8 Tbit
Sync Break Detect
13.3.8
FIFO Operation
The UART has two 16-entry FIFOs; one for transmit and one for receive. Both FIFOs are accessed
via the UART Data (UARTDR) register (see page 612). Read operations of the UARTDR register
return a 12-bit value consisting of 8 data bits and 4 error flags while write operations place 8-bit data
in the transmit FIFO.
Out of reset, both FIFOs are disabled and act as 1-byte-deep holding registers. The FIFOs are
enabled by setting the FEN bit in UARTLCRH (page 623).
FIFO status can be monitored via the UART Flag (UARTFR) register (see page 617) and the UART
Receive Status (UARTRSR) register. Hardware monitors empty, full and overrun conditions. The
UARTFR register contains empty and full flags (TXFE, TXFF, RXFE, and RXFF bits), and the
UARTRSR register shows overrun status via the OE bit.
The trigger points at which the FIFOs generate interrupts is controlled via the UART Interrupt FIFO
Level Select (UARTIFLS) register (see page 629). Both FIFOs can be individually configured to
trigger interrupts at different levels. Available configurations include ⅛, ¼, ½, ¾, and ⅞. For example,
if the ¼ option is selected for the receive FIFO, the UART generates a receive interrupt after 4 data
bytes are received. Out of reset, both FIFOs are configured to trigger an interrupt at the ½ mark.
13.3.9
Interrupts
The UART can generate interrupts when the following conditions are observed:
■ Overrun Error
■ Break Error
■ Parity Error
■ Framing Error
■ Receive Timeout
■ Transmit (when condition defined in the TXIFLSEL bit in the UARTIFLS register is met, or if the
EOT bit in UARTCTL is set, when the last bit of all transmitted data leaves the serializer)
■ Receive (when condition defined in the RXIFLSEL bit in the UARTIFLS register is met)
All of the interrupt events are ORed together before being sent to the interrupt controller, so the
UART can only generate a single interrupt request to the controller at any given time. Software can
service multiple interrupt events in a single interrupt service routine by reading the UART Masked
Interrupt Status (UARTMIS) register (see page 638).
July 25, 2011
607
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
The interrupt events that can trigger a controller-level interrupt are defined in the UART Interrupt
Mask (UARTIM) register (see page 631) by setting the corresponding IM bits. If interrupts are not
used, the raw interrupt status is always visible via the UART Raw Interrupt Status (UARTRIS)
register (see page 635).
Interrupts are always cleared (for both the UARTMIS and UARTRIS registers) by writing a 1 to the
corresponding bit in the UART Interrupt Clear (UARTICR) register (see page 641).
The receive timeout interrupt is asserted when the receive FIFO is not empty, and no further data
is received over a 32-bit period. The receive timeout interrupt is cleared either when the FIFO
becomes empty through reading all the data (or by reading the holding register), or when a 1 is
written to the corresponding bit in the UARTICR register.
13.3.10
Loopback Operation
The UART can be placed into an internal loopback mode for diagnostic or debug work by setting
the LBE bit in the UARTCTL register (see page 625). In loopback mode, data transmitted on the
UnTx output is received on the UnRx input. Note that the LBE bit should be set before the UART is
enabled.
13.3.11
DMA Operation
The UART provides an interface to the μDMA controller with separate channels for transmit and
receive. The DMA operation of the UART is enabled through the UART DMA Control
(UARTDMACTL) register. When DMA operation is enabled, the UART asserts a DMA request on
the receive or transmit channel when the associated FIFO can transfer data. For the receive channel,
a single transfer request is asserted whenever any data is in the receive FIFO. A burst transfer
request is asserted whenever the amount of data in the receive FIFO is at or above the FIFO trigger
level configured in the UARTIFLS register. For the transmit channel, a single transfer request is
asserted whenever there is at least one empty location in the transmit FIFO. The burst request is
asserted whenever the transmit FIFO contains fewer characters than the FIFO trigger level. The
single and burst DMA transfer requests are handled automatically by the μDMA controller depending
on how the DMA channel is configured.
To enable DMA operation for the receive channel, set the RXDMAE bit of the DMA Control
(UARTDMACTL) register. To enable DMA operation for the transmit channel, set the TXDMAE bit
of the UARTDMACTL register. The UART can also be configured to stop using DMA for the receive
channel if a receive error occurs. If the DMAERR bit of the UARTDMACR register is set and a receive
error occurs, the DMA receive requests are automatically disabled. This error condition can be
cleared by clearing the appropriate UART error interrupt.
If DMA is enabled, then the μDMA controller triggers an interrupt when a transfer is complete. The
interrupt occurs on the UART interrupt vector. Therefore, if interrupts are used for UART operation
and DMA is enabled, the UART interrupt handler must be designed to handle the μDMA completion
interrupt.
See “Micro Direct Memory Access (μDMA)” on page 335 for more details about programming the
μDMA controller.
13.4
Initialization and Configuration
To enable and initialize the UART, the following steps are necessary:
1. The peripheral clock must be enabled by setting the UART0, UART1, or UART2 bits in the RCGC1
register (see page 243).
608
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
2. The clock to the appropriate GPIO module must be enabled via the RCGC2 register in the
System Control module (see page 251).
3. Set the GPIO AFSEL bits for the appropriate pins (see page 418). To determine which GPIOs to
configure, see Table 17-4 on page 753.
4. Configure the GPIO current level and/or slew rate as specified for the mode selected (see
page 420 and page 428).
5. Configure the PMCn fields in the GPIOPCTL register to assign the UART signals to the appropriate
pins (see page 435 and Table 17-5 on page 757).
To use the UART, the peripheral clock must be enabled by setting the appropriate bit in the RCGC1
register (page 243). In addition, the clock to the appropriate GPIO module must be enabled via the
RCGC2 register (page 251) in the System Control module. To find out which GPIO port to enable,
refer to Table 17-5 on page 757.
This section discusses the steps that are required to use a UART module. For this example, the
UART clock is assumed to be 20 MHz, and the desired UART configuration is:
■ 115200 baud rate
■ Data length of 8 bits
■ One stop bit
■ No parity
■ FIFOs disabled
■ No interrupts
The first thing to consider when programming the UART is the baud-rate divisor (BRD), because
the UARTIBRD and UARTFBRD registers must be written before the UARTLCRH register. Using
the equation described in “Baud-Rate Generation” on page 601, the BRD can be calculated:
BRD = 20,000,000 / (16 * 115,200) = 10.8507
which means that the DIVINT field of the UARTIBRD register (see page 621) should be set to 10
decimal or 0xA. The value to be loaded into the UARTFBRD register (see page 622) is calculated
by the equation:
UARTFBRD[DIVFRAC] = integer(0.8507 * 64 + 0.5) = 54
With the BRD values in hand, the UART configuration is written to the module in the following order:
1. Disable the UART by clearing the UARTEN bit in the UARTCTL register.
2. Write the integer portion of the BRD to the UARTIBRD register.
3. Write the fractional portion of the BRD to the UARTFBRD register.
4. Write the desired serial parameters to the UARTLCRH register (in this case, a value of
0x0000.0060).
5. Optionally, configure the µDMA channel (see “Micro Direct Memory Access (μDMA)” on page 335)
and enable the DMA option(s) in the UARTDMACTL register.
July 25, 2011
609
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
6. Enable the UART by setting the UARTEN bit in the UARTCTL register.
13.5
Register Map
Table 13-4 on page 610 lists the UART registers. The offset listed is a hexadecimal increment to the
register’s address, relative to that UART’s base address:
■ UART0: 0x4000.C000
■ UART1: 0x4000.D000
■ UART2: 0x4000.E000
Note that the UART module clock must be enabled before the registers can be programmed (see
page 243). There must be a delay of 3 system clocks after the UART module clock is enabled before
any UART module registers are accessed.
Note:
The UART must be disabled (see the UARTEN bit in the UARTCTL register on page 625)
before any of the control registers are reprogrammed. When the UART is disabled during
a TX or RX operation, the current transaction is completed prior to the UART stopping.
Table 13-4. UART Register Map
Offset
Name
Type
Reset
Description
See
page
0x000
UARTDR
R/W
0x0000.0000
UART Data
612
0x004
UARTRSR/UARTECR
R/W
0x0000.0000
UART Receive Status/Error Clear
614
0x018
UARTFR
RO
0x0000.0090
UART Flag
617
0x020
UARTILPR
R/W
0x0000.0000
UART IrDA Low-Power Register
620
0x024
UARTIBRD
R/W
0x0000.0000
UART Integer Baud-Rate Divisor
621
0x028
UARTFBRD
R/W
0x0000.0000
UART Fractional Baud-Rate Divisor
622
0x02C
UARTLCRH
R/W
0x0000.0000
UART Line Control
623
0x030
UARTCTL
R/W
0x0000.0300
UART Control
625
0x034
UARTIFLS
R/W
0x0000.0012
UART Interrupt FIFO Level Select
629
0x038
UARTIM
R/W
0x0000.0000
UART Interrupt Mask
631
0x03C
UARTRIS
RO
0x0000.000F
UART Raw Interrupt Status
635
0x040
UARTMIS
RO
0x0000.0000
UART Masked Interrupt Status
638
0x044
UARTICR
W1C
0x0000.0000
UART Interrupt Clear
641
0x048
UARTDMACTL
R/W
0x0000.0000
UART DMA Control
643
0x090
UARTLCTL
R/W
0x0000.0000
UART LIN Control
644
0x094
UARTLSS
RO
0x0000.0000
UART LIN Snap Shot
645
0x098
UARTLTIM
RO
0x0000.0000
UART LIN Timer
646
0xFD0
UARTPeriphID4
RO
0x0000.0000
UART Peripheral Identification 4
647
0xFD4
UARTPeriphID5
RO
0x0000.0000
UART Peripheral Identification 5
648
0xFD8
UARTPeriphID6
RO
0x0000.0000
UART Peripheral Identification 6
649
610
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 13-4. UART Register Map (continued)
Offset
Name
0xFDC
Reset
UARTPeriphID7
RO
0x0000.0000
UART Peripheral Identification 7
650
0xFE0
UARTPeriphID0
RO
0x0000.0060
UART Peripheral Identification 0
651
0xFE4
UARTPeriphID1
RO
0x0000.0000
UART Peripheral Identification 1
652
0xFE8
UARTPeriphID2
RO
0x0000.0018
UART Peripheral Identification 2
653
0xFEC
UARTPeriphID3
RO
0x0000.0001
UART Peripheral Identification 3
654
0xFF0
UARTPCellID0
RO
0x0000.000D
UART PrimeCell Identification 0
655
0xFF4
UARTPCellID1
RO
0x0000.00F0
UART PrimeCell Identification 1
656
0xFF8
UARTPCellID2
RO
0x0000.0005
UART PrimeCell Identification 2
657
0xFFC
UARTPCellID3
RO
0x0000.00B1
UART PrimeCell Identification 3
658
13.6
Description
See
page
Type
Register Descriptions
The remainder of this section lists and describes the UART registers, in numerical order by address
offset.
July 25, 2011
611
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 1: UART Data (UARTDR), offset 0x000
Important: This register is read-sensitive. See the register description for details.
This register is the data register (the interface to the FIFOs).
For transmitted data, if the FIFO is enabled, data written to this location is pushed onto the transmit
FIFO. If the FIFO is disabled, data is stored in the transmitter holding register (the bottom word of
the transmit FIFO). A write to this register initiates a transmission from the UART.
For received data, if the FIFO is enabled, the data byte and the 4-bit status (break, frame, parity,
and overrun) is pushed onto the 12-bit wide receive FIFO. If the FIFO is disabled, the data byte and
status are stored in the receiving holding register (the bottom word of the receive FIFO). The received
data can be retrieved by reading this register.
UART Data (UARTDR)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x000
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
OE
BE
PE
FE
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:12
reserved
RO
0x0000.0
11
OE
RO
0
DATA
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Overrun Error
Value Description
10
BE
RO
0
1
New data was received when the FIFO was full, resulting in
data loss.
0
No data has been lost due to a FIFO overrun.
UART Break Error
Value Description
1
A break condition has been detected, indicating that the receive
data input was held Low for longer than a full-word transmission
time (defined as start, data, parity, and stop bits).
0
No break condition has occurred
In FIFO mode, this error is associated with the character at the top of
the FIFO. When a break occurs, only one 0 character is loaded into the
FIFO. The next character is only enabled after the received data input
goes to a 1 (marking state), and the next valid start bit is received.
612
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
9
PE
RO
0
Description
UART Parity Error
Value Description
1
The parity of the received data character does not match the
parity defined by bits 2 and 7 of the UARTLCRH register.
0
No parity error has occurred
In FIFO mode, this error is associated with the character at the top of
the FIFO.
8
FE
RO
0
UART Framing Error
Value Description
7:0
DATA
R/W
0x00
1
The received character does not have a valid stop bit (a valid
stop bit is 1).
0
No framing error has occurred
Data Transmitted or Received
Data that is to be transmitted via the UART is written to this field.
When read, this field contains the data that was received by the UART.
July 25, 2011
613
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 2: UART Receive Status/Error Clear (UARTRSR/UARTECR), offset
0x004
The UARTRSR/UARTECR register is the receive status register/error clear register.
In addition to the UARTDR register, receive status can also be read from the UARTRSR register.
If the status is read from this register, then the status information corresponds to the entry read from
UARTDR prior to reading UARTRSR. The status information for overrun is set immediately when
an overrun condition occurs.
The UARTRSR register cannot be written.
A write of any value to the UARTECR register clears the framing, parity, break, and overrun errors.
All the bits are cleared on reset.
Read-Only Status Register
UART Receive Status/Error Clear (UARTRSR/UARTECR)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x004
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:4
reserved
RO
0x0000.000
3
OE
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
3
2
1
0
OE
BE
PE
FE
RO
0
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Overrun Error
Value Description
1
New data was received when the FIFO was full, resulting in
data loss.
0
No data has been lost due to a FIFO overrun.
This bit is cleared by a write to UARTECR.
The FIFO contents remain valid because no further data is written when
the FIFO is full, only the contents of the shift register are overwritten.
The CPU must read the data in order to empty the FIFO.
614
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
2
BE
RO
0
Description
UART Break Error
Value Description
1
A break condition has been detected, indicating that the receive
data input was held Low for longer than a full-word transmission
time (defined as start, data, parity, and stop bits).
0
No break condition has occurred
This bit is cleared to 0 by a write to UARTECR.
In FIFO mode, this error is associated with the character at the top of
the FIFO. When a break occurs, only one 0 character is loaded into the
FIFO. The next character is only enabled after the receive data input
goes to a 1 (marking state) and the next valid start bit is received.
1
PE
RO
0
UART Parity Error
Value Description
1
The parity of the received data character does not match the
parity defined by bits 2 and 7 of the UARTLCRH register.
0
No parity error has occurred
This bit is cleared to 0 by a write to UARTECR.
0
FE
RO
0
UART Framing Error
Value Description
1
The received character does not have a valid stop bit (a valid
stop bit is 1).
0
No framing error has occurred
This bit is cleared to 0 by a write to UARTECR.
In FIFO mode, this error is associated with the character at the top of
the FIFO.
Write-Only Error Clear Register
UART Receive Status/Error Clear (UARTRSR/UARTECR)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x004
Type WO, reset 0x0000.0000
31
30
29
28
27
26
25
24
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
15
14
13
12
11
10
9
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
23
22
21
20
19
18
17
16
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
8
7
6
5
4
3
2
1
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
WO
0
reserved
Type
Reset
reserved
Type
Reset
WO
0
DATA
July 25, 2011
615
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Bit/Field
Name
Type
Reset
31:8
reserved
WO
0x0000.00
7:0
DATA
WO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Error Clear
A write to this register of any data clears the framing, parity, break, and
overrun flags.
616
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 3: UART Flag (UARTFR), offset 0x018
The UARTFR register is the flag register. After reset, the TXFF, RXFF, and BUSY bits are 0, and
TXFE and RXFE bits are 1. The RI, DCD, DSR and CTS bits indicate the modem flow control and
status. Note that the modem bits are only implemented on UART1 and are reserved on UART0 and
UART2.
UART Flag (UARTFR)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x018
Type RO, reset 0x0000.0090
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RI
TXFE
RXFF
TXFF
RXFE
BUSY
DCD
DSR
CTS
RO
0
RO
1
RO
0
RO
0
RO
1
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:9
reserved
RO
0x0000.00
8
RI
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Ring Indicator
Value Description
1
The U1RI signal is asserted.
0
The U1RI signal is not asserted.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
7
TXFE
RO
1
UART Transmit FIFO Empty
The meaning of this bit depends on the state of the FEN bit in the
UARTLCRH register.
Value Description
1
If the FIFO is disabled (FEN is 0), the transmit holding register
is empty.
If the FIFO is enabled (FEN is 1), the transmit FIFO is empty.
0
The transmitter has data to transmit.
July 25, 2011
617
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Bit/Field
Name
Type
Reset
6
RXFF
RO
0
Description
UART Receive FIFO Full
The meaning of this bit depends on the state of the FEN bit in the
UARTLCRH register.
Value Description
1
If the FIFO is disabled (FEN is 0), the receive holding register
is full.
If the FIFO is enabled (FEN is 1), the receive FIFO is full.
0
5
TXFF
RO
0
The receiver can receive data.
UART Transmit FIFO Full
The meaning of this bit depends on the state of the FEN bit in the
UARTLCRH register.
Value Description
1
If the FIFO is disabled (FEN is 0), the transmit holding register
is full.
If the FIFO is enabled (FEN is 1), the transmit FIFO is full.
0
4
RXFE
RO
1
The transmitter is not full.
UART Receive FIFO Empty
The meaning of this bit depends on the state of the FEN bit in the
UARTLCRH register.
Value Description
1
If the FIFO is disabled (FEN is 0), the receive holding register
is empty.
If the FIFO is enabled (FEN is 1), the receive FIFO is empty.
0
3
BUSY
RO
0
The receiver is not empty.
UART Busy
Value Description
1
The UART is busy transmitting data. This bit remains set until
the complete byte, including all stop bits, has been sent from
the shift register.
0
The UART is not busy.
This bit is set as soon as the transmit FIFO becomes non-empty
(regardless of whether UART is enabled).
2
DCD
RO
0
Data Carrier Detect
Value Description
1
The U1DCD signal is asserted.
0
The U1DCD signal is not asserted.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
618
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
1
DSR
RO
0
Description
Data Set Ready
Value Description
1
The U1DSR signal is asserted.
0
The U1DSR signal is not asserted.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
0
CTS
RO
0
Clear To Send
Value Description
1
The U1CTS signal is asserted.
0
The U1CTS signal is not asserted.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
July 25, 2011
619
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 4: UART IrDA Low-Power Register (UARTILPR), offset 0x020
The UARTILPR register stores the 8-bit low-power counter divisor value used to derive the low-power
SIR pulse width clock by dividing down the system clock (SysClk). All the bits are cleared when
reset.
The internal IrLPBaud16 clock is generated by dividing down SysClk according to the low-power
divisor value written to UARTILPR. The duration of SIR pulses generated when low-power mode
is enabled is three times the period of the IrLPBaud16 clock. The low-power divisor value is
calculated as follows:
ILPDVSR = SysClk / FIrLPBaud16
where FIrLPBaud16 is nominally 1.8432 MHz.
The divisor must be programmed such that 1.42 MHz < FIrLPBaud16 < 2.12 MHz, resulting in a
low-power pulse duration of 1.41–2.11 μs (three times the period of IrLPBaud16). The minimum
frequency of IrLPBaud16 ensures that pulses less than one period of IrLPBaud16 are rejected,
but pulses greater than 1.4 μs are accepted as valid pulses.
Note:
Zero is an illegal value. Programming a zero value results in no IrLPBaud16 pulses being
generated.
UART IrDA Low-Power Register (UARTILPR)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x020
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
ILPDVSR
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
ILPDVSR
R/W
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
IrDA Low-Power Divisor
This field contains the 8-bit low-power divisor value.
620
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 5: UART Integer Baud-Rate Divisor (UARTIBRD), offset 0x024
The UARTIBRD register is the integer part of the baud-rate divisor value. All the bits are cleared
on reset. The minimum possible divide ratio is 1 (when UARTIBRD=0), in which case the UARTFBRD
register is ignored. When changing the UARTIBRD register, the new value does not take effect until
transmission/reception of the current character is complete. Any changes to the baud-rate divisor
must be followed by a write to the UARTLCRH register. See “Baud-Rate Generation” on page 601
for configuration details.
UART Integer Baud-Rate Divisor (UARTIBRD)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x024
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
DIVINT
Type
Reset
Bit/Field
Name
Type
Reset
Description
31:16
reserved
RO
0x0000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15:0
DIVINT
R/W
0x0000
Integer Baud-Rate Divisor
July 25, 2011
621
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 6: UART Fractional Baud-Rate Divisor (UARTFBRD), offset 0x028
The UARTFBRD register is the fractional part of the baud-rate divisor value. All the bits are cleared
on reset. When changing the UARTFBRD register, the new value does not take effect until
transmission/reception of the current character is complete. Any changes to the baud-rate divisor
must be followed by a write to the UARTLCRH register. See “Baud-Rate Generation” on page 601
for configuration details.
UART Fractional Baud-Rate Divisor (UARTFBRD)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x028
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
DIVFRAC
Bit/Field
Name
Type
Reset
31:6
reserved
RO
0x0000.000
5:0
DIVFRAC
R/W
0x0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Fractional Baud-Rate Divisor
622
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 7: UART Line Control (UARTLCRH), offset 0x02C
The UARTLCRH register is the line control register. Serial parameters such as data length, parity,
and stop bit selection are implemented in this register.
When updating the baud-rate divisor (UARTIBRD and/or UARTIFRD), the UARTLCRH register
must also be written. The write strobe for the baud-rate divisor registers is tied to the UARTLCRH
register.
UART Line Control (UARTLCRH)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x02C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
SPS
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7
SPS
R/W
0
RO
0
R/W
0
5
WLEN
R/W
0
R/W
0
4
3
2
1
0
FEN
STP2
EPS
PEN
BRK
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Stick Parity Select
When bits 1, 2, and 7 of UARTLCRH are set, the parity bit is transmitted
and checked as a 0. When bits 1 and 7 are set and 2 is cleared, the
parity bit is transmitted and checked as a 1.
When this bit is cleared, stick parity is disabled.
6:5
WLEN
R/W
0x0
UART Word Length
The bits indicate the number of data bits transmitted or received in a
frame as follows:
Value Description
4
FEN
R/W
0
0x0
5 bits (default)
0x1
6 bits
0x2
7 bits
0x3
8 bits
UART Enable FIFOs
Value Description
1
The transmit and receive FIFO buffers are enabled (FIFO mode).
0
The FIFOs are disabled (Character mode). The FIFOs become
1-byte-deep holding registers.
July 25, 2011
623
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Bit/Field
Name
Type
Reset
3
STP2
R/W
0
Description
UART Two Stop Bits Select
Value Description
1
Two stop bits are transmitted at the end of a frame. The receive
logic does not check for two stop bits being received.
When in 7816 smartcard mode (the SMART bit is set in the
UARTCTL register), the number of stop bits is forced to 2.
0
2
EPS
R/W
0
One stop bit is transmitted at the end of a frame.
UART Even Parity Select
Value Description
1
Even parity generation and checking is performed during
transmission and reception, which checks for an even number
of 1s in data and parity bits.
0
Odd parity is performed, which checks for an odd number of 1s.
This bit has no effect when parity is disabled by the PEN bit.
1
PEN
R/W
0
UART Parity Enable
Value Description
0
BRK
R/W
0
1
Parity checking and generation is enabled.
0
Parity is disabled and no parity bit is added to the data frame.
UART Send Break
Value Description
1
A Low level is continually output on the UnTx signal, after
completing transmission of the current character. For the proper
execution of the break command, software must set this bit for
at least two frames (character periods).
0
Normal use.
624
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 8: UART Control (UARTCTL), offset 0x030
The UARTCTL register is the control register. All the bits are cleared on reset except for the Transmit
Enable (TXE) and Receive Enable (RXE) bits, which are set.
To enable the UART module, the UARTEN bit must be set. If software requires a configuration change
in the module, the UARTEN bit must be cleared before the configuration changes are written. If the
UART is disabled during a transmit or receive operation, the current transaction is completed prior
to the UART stopping.
Note that bits [15:14,11:10] are only implemented on UART1. These bits are reserved on UART0
and UART2.
Note:
The UARTCTL register should not be changed while the UART is enabled or else the results
are unpredictable. The following sequence is recommended for making changes to the
UARTCTL register.
1. Disable the UART.
2. Wait for the end of transmission or reception of the current character.
3. Flush the transmit FIFO by clearing bit 4 (FEN) in the line control register (UARTLCRH).
4. Reprogram the control register.
5. Enable the UART.
UART Control (UARTCTL)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x030
Type R/W, reset 0x0000.0300
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
Type
Reset
RO
0
RO
0
RO
0
RO
0
13
12
15
14
CTSEN
RTSEN
R/W
0
R/W
0
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
11
10
9
8
7
6
5
4
3
2
1
0
RTS
DTR
RXE
TXE
LBE
LIN
HSE
EOT
SMART
SIRLP
SIREN
UARTEN
R/W
0
R/W
0
R/W
1
R/W
1
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
31:16
reserved
RO
0x0000
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 25, 2011
625
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Bit/Field
Name
Type
Reset
15
CTSEN
R/W
0
Description
Enable Clear To Send
Value Description
1
CTS hardware flow control is enabled. Data is only transmitted
when the U1CTS signal is asserted.
0
CTS hardware flow control is disabled.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
14
RTSEN
R/W
0
Enable Request to Send
Value Description
1
RTS hardware flow control is enabled. Data is only requested
(by asserting U1RTS) when the receive FIFO has available
entries.
0
RTS hardware flow control is disabled.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
13:12
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
11
RTS
R/W
0
Request to Send
When RTSEN is clear, the status of this bit is reflected on the U1RTS
signal. If RTSEN is set, this bit is ignored on a write and should be ignored
on read.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
10
DTR
R/W
0
Data Terminal Ready
This bit sets the state of the U1DTR output.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
9
RXE
R/W
1
UART Receive Enable
Value Description
1
The receive section of the UART is enabled.
0
The receive section of the UART is disabled.
If the UART is disabled in the middle of a receive, it completes the current
character before stopping.
Note:
To enable reception, the UARTEN bit must also be set.
626
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
8
TXE
R/W
1
Description
UART Transmit Enable
Value Description
1
The transmit section of the UART is enabled.
0
The transmit section of the UART is disabled.
If the UART is disabled in the middle of a transmission, it completes the
current character before stopping.
Note:
7
LBE
R/W
0
To enable transmission, the UARTEN bit must also be set.
UART Loop Back Enable
Value Description
6
LIN
R/W
0
1
The UnTx path is fed through the UnRx path.
0
Normal operation.
LIN Mode Enable
Value Description
5
HSE
R/W
0
1
The UART operates in LIN mode.
0
Normal operation.
High-Speed Enable
Value Description
0
The UART is clocked using the system clock divided by 16.
1
The UART is clocked using the system clock divided by 8.
Note:
System clock used is also dependent on the baud-rate divisor
configuration (see page 621) and page 622).
The state of this bit has no effect on clock generation in ISO
7816 smart card mode (the SMART bit is set).
4
EOT
R/W
0
End of Transmission
This bit determines the behavior of the TXRIS bit in the UARTRIS
register.
Value Description
1
The TXRIS bit is set only after all transmitted data, including
stop bits, have cleared the serializer.
0
The TXRIS bit is set when the transmit FIFO condition specified
in UARTIFLS is met.
July 25, 2011
627
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Bit/Field
Name
Type
Reset
3
SMART
R/W
0
Description
ISO 7816 Smart Card Support
Value Description
1
The UART operates in Smart Card mode.
0
Normal operation.
The application must ensure that it sets 8-bit word length (WLEN set to
0x3) and even parity (PEN set to 1, EPS set to 1, SPS set to 0) in
UARTLCRH when using ISO 7816 mode.
In this mode, the value of the STP2 bit in UARTLCRH is ignored and
the number of stop bits is forced to 2. Note that the UART does not
support automatic retransmission on parity errors. If a parity error is
detected on transmission, all further transmit operations are aborted
and software must handle retransmission of the affected byte or
message.
2
SIRLP
R/W
0
UART SIR Low-Power Mode
This bit selects the IrDA encoding mode.
Value Description
1
The UART operates in SIR Low-Power mode. Low-level bits
are transmitted with a pulse width which is 3 times the period
of the IrLPBaud16 input signal, regardless of the selected bit
rate.
0
Low-level bits are transmitted as an active High pulse with a
width of 3/16th of the bit period.
Setting this bit uses less power, but might reduce transmission distances.
See page 620 for more information.
1
SIREN
R/W
0
UART SIR Enable
Value Description
0
UARTEN
R/W
0
1
The IrDA SIR block is enabled, and the UART will transmit and
receive data using SIR protocol.
0
Normal operation.
UART Enable
Value Description
1
The UART is enabled.
0
The UART is disabled.
If the UART is disabled in the middle of transmission or reception, it
completes the current character before stopping.
628
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 9: UART Interrupt FIFO Level Select (UARTIFLS), offset 0x034
The UARTIFLS register is the interrupt FIFO level select register. You can use this register to define
the FIFO level at which the TXRIS and RXRIS bits in the UARTRIS register are triggered.
The interrupts are generated based on a transition through a level rather than being based on the
level. That is, the interrupts are generated when the fill level progresses through the trigger level.
For example, if the receive trigger level is set to the half-way mark, the interrupt is triggered as the
module is receiving the 9th character.
Out of reset, the TXIFLSEL and RXIFLSEL bits are configured so that the FIFOs trigger an interrupt
at the half-way mark.
UART Interrupt FIFO Level Select (UARTIFLS)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x034
Type R/W, reset 0x0000.0012
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
RXIFLSEL
Bit/Field
Name
Type
Reset
31:6
reserved
RO
0x0000.00
5:3
RXIFLSEL
R/W
0x2
R/W
1
TXIFLSEL
R/W
1
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Receive Interrupt FIFO Level Select
The trigger points for the receive interrupt are as follows:
Value
Description
0x0
RX FIFO ≥ ⅛ full
0x1
RX FIFO ≥ ¼ full
0x2
RX FIFO ≥ ½ full (default)
0x3
RX FIFO ≥ ¾ full
0x4
RX FIFO ≥ ⅞ full
0x5-0x7 Reserved
July 25, 2011
629
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Bit/Field
Name
Type
Reset
2:0
TXIFLSEL
R/W
0x2
Description
UART Transmit Interrupt FIFO Level Select
The trigger points for the transmit interrupt are as follows:
Value
Description
0x0
TX FIFO ≤ ⅞ empty
0x1
TX FIFO ≤ ¾ empty
0x2
TX FIFO ≤ ½ empty (default)
0x3
TX FIFO ≤ ¼ empty
0x4
TX FIFO ≤ ⅛ empty
0x5-0x7 Reserved
Note:
If the EOT bit in UARTCTL is set (see page 625), the transmit
interrupt is generated once the FIFO is completely empty and
all data including stop bits have left the transmit serializer. In
this case, the setting of TXIFLSEL is ignored.
630
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 10: UART Interrupt Mask (UARTIM), offset 0x038
The UARTIM register is the interrupt mask set/clear register.
On a read, this register gives the current value of the mask on the relevant interrupt. Setting a bit
allows the corresponding raw interrupt signal to be routed to the interrupt controller. Clearing a bit
prevents the raw interrupt signal from being sent to the interrupt controller.
Note that bits [3:0] are only implemented on UART1. These bits are reserved on UART0 and UART2.
UART Interrupt Mask (UARTIM)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x038
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
LME5IM
LME1IM
LMSBIM
OEIM
R/W
0
R/W
0
R/W
0
R/W
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
BEIM
PEIM
FEIM
RTIM
TXIM
RXIM
DSRIM
DCDIM
CTSIM
RIIM
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
Type
Reset
reserved
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:16
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15
LME5IM
R/W
0
LIN Mode Edge 5 Interrupt Mask
Value Description
14
LME1IM
R/W
0
1
An interrupt is sent to the interrupt controller when the LME5RIS
bit in the UARTRIS register is set.
0
The LME5RIS interrupt is suppressed and not sent to the
interrupt controller.
LIN Mode Edge 1 Interrupt Mask
Value Description
13
LMSBIM
R/W
0
1
An interrupt is sent to the interrupt controller when the LME1RIS
bit in the UARTRIS register is set.
0
The LME1RIS interrupt is suppressed and not sent to the
interrupt controller.
LIN Mode Sync Break Interrupt Mask
Value Description
1
An interrupt is sent to the interrupt controller when the LMSBRIS
bit in the UARTRIS register is set.
0
The LMSBRIS interrupt is suppressed and not sent to the
interrupt controller.
July 25, 2011
631
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Bit/Field
Name
Type
Reset
Description
12:11
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
10
OEIM
R/W
0
UART Overrun Error Interrupt Mask
Value Description
9
BEIM
R/W
0
1
An interrupt is sent to the interrupt controller when the OERIS
bit in the UARTRIS register is set.
0
The OERIS interrupt is suppressed and not sent to the interrupt
controller.
UART Break Error Interrupt Mask
Value Description
8
PEIM
R/W
0
1
An interrupt is sent to the interrupt controller when the BERIS
bit in the UARTRIS register is set.
0
The BERIS interrupt is suppressed and not sent to the interrupt
controller.
UART Parity Error Interrupt Mask
Value Description
7
FEIM
R/W
0
1
An interrupt is sent to the interrupt controller when the PERIS
bit in the UARTRIS register is set.
0
The PERIS interrupt is suppressed and not sent to the interrupt
controller.
UART Framing Error Interrupt Mask
Value Description
6
RTIM
R/W
0
1
An interrupt is sent to the interrupt controller when the FERIS
bit in the UARTRIS register is set.
0
The FERIS interrupt is suppressed and not sent to the interrupt
controller.
UART Receive Time-Out Interrupt Mask
Value Description
1
An interrupt is sent to the interrupt controller when the RTRIS
bit in the UARTRIS register is set.
0
The RTRIS interrupt is suppressed and not sent to the interrupt
controller.
632
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
5
TXIM
R/W
0
Description
UART Transmit Interrupt Mask
Value Description
4
RXIM
R/W
0
1
An interrupt is sent to the interrupt controller when the TXRIS
bit in the UARTRIS register is set.
0
The TXRIS interrupt is suppressed and not sent to the interrupt
controller.
UART Receive Interrupt Mask
Value Description
3
DSRIM
R/W
0
1
An interrupt is sent to the interrupt controller when the RXRIS
bit in the UARTRIS register is set.
0
The RXRIS interrupt is suppressed and not sent to the interrupt
controller.
UART Data Set Ready Modem Interrupt Mask
Value Description
1
An interrupt is sent to the interrupt controller when the DSRRIS
bit in the UARTRIS register is set.
0
The DSRRIS interrupt is suppressed and not sent to the interrupt
controller.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
2
DCDIM
R/W
0
UART Data Carrier Detect Modem Interrupt Mask
Value Description
1
An interrupt is sent to the interrupt controller when the DCDRIS
bit in the UARTRIS register is set.
0
The DCDRIS interrupt is suppressed and not sent to the interrupt
controller.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
1
CTSIM
R/W
0
UART Clear to Send Modem Interrupt Mask
Value Description
1
An interrupt is sent to the interrupt controller when the CTSRIS
bit in the UARTRIS register is set.
0
The CTSRIS interrupt is suppressed and not sent to the interrupt
controller.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
July 25, 2011
633
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Bit/Field
Name
Type
Reset
0
RIIM
R/W
0
Description
UART Ring Indicator Modem Interrupt Mask
Value Description
1
An interrupt is sent to the interrupt controller when the RIRIS
bit in the UARTRIS register is set.
0
The RIRIS interrupt is suppressed and not sent to the interrupt
controller.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
634
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 11: UART Raw Interrupt Status (UARTRIS), offset 0x03C
The UARTRIS register is the raw interrupt status register. On a read, this register gives the current
raw status value of the corresponding interrupt. A write has no effect.
Note that bits [3:0] are only implemented on UART1. These bits are reserved on UART0 and UART2.
UART Raw Interrupt Status (UARTRIS)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x03C
Type RO, reset 0x0000.000F
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
LME5RIS LME1RIS LMSBRIS
Type
Reset
RO
0
RO
0
RO
0
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
10
9
8
7
6
5
4
3
2
1
0
OERIS
BERIS
PERIS
FERIS
RTRIS
TXRIS
RXRIS
DSRRIS
DCDRIS
CTSRIS
RIRIS
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:16
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15
LME5RIS
RO
0
LIN Mode Edge 5 Raw Interrupt Status
Value Description
1
The timer value at the 5th falling edge of the LIN Sync Field has
been captured.
0
No interrupt
This bit is cleared by writing a 1 to the LME5IC bit in the UARTICR
register.
14
LME1RIS
RO
0
LIN Mode Edge 1 Raw Interrupt Status
Value Description
1
The timer value at the 1st falling edge of the LIN Sync Field has
been captured.
0
No interrupt
This bit is cleared by writing a 1 to the LME1IC bit in the UARTICR
register.
13
LMSBRIS
RO
0
LIN Mode Sync Break Raw Interrupt Status
Value Description
1
A LIN Sync Break has been detected.
0
No interrupt
This bit is cleared by writing a 1 to the LMSBIC bit in the UARTICR
register.
July 25, 2011
635
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Bit/Field
Name
Type
Reset
Description
12:11
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
10
OERIS
RO
0
UART Overrun Error Raw Interrupt Status
Value Description
1
An overrun error has occurred.
0
No interrupt
This bit is cleared by writing a 1 to the OEIC bit in the UARTICR register.
9
BERIS
RO
0
UART Break Error Raw Interrupt Status
Value Description
1
A break error has occurred.
0
No interrupt
This bit is cleared by writing a 1 to the BEIC bit in the UARTICR register.
8
PERIS
RO
0
UART Parity Error Raw Interrupt Status
Value Description
1
A parity error has occurred.
0
No interrupt
This bit is cleared by writing a 1 to the PEIC bit in the UARTICR register.
7
FERIS
RO
0
UART Framing Error Raw Interrupt Status
Value Description
1
A framing error has occurred.
0
No interrupt
This bit is cleared by writing a 1 to the FEIC bit in the UARTICR register.
6
RTRIS
RO
0
UART Receive Time-Out Raw Interrupt Status
Value Description
1
A receive time out has occurred.
0
No interrupt
This bit is cleared by writing a 1 to the RTIC bit in the UARTICR register.
5
TXRIS
RO
0
UART Transmit Raw Interrupt Status
Value Description
1
If the EOT bit in the UARTCTL register is clear, the transmit
FIFO level has passed through the condition defined in the
UARTIFLS register.
If the EOT bit is set, the last bit of all transmitted data and flags
has left the serializer.
0
No interrupt
This bit is cleared by writing a 1 to the TXIC bit in the UARTICR register.
636
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
4
RXRIS
RO
0
Description
UART Receive Raw Interrupt Status
Value Description
1
The receive FIFO level has passed through the condition defined
in the UARTIFLS register.
0
No interrupt
This bit is cleared by writing a 1 to the RXIC bit in the UARTICR register.
3
DSRRIS
RO
0
UART Data Set Ready Modem Raw Interrupt Status
Value Description
1
Data Set Ready used for software flow control.
0
No interrupt
This bit is cleared by writing a 1 to the DSRIC bit in the UARTICR
register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
2
DCDRIS
RO
0
UART Data Carrier Detect Modem Raw Interrupt Status
Value Description
1
Data Carrier Detect used for software flow control.
0
No interrupt
This bit is cleared by writing a 1 to the DCDIC bit in the UARTICR
register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
1
CTSRIS
RO
0
UART Clear to Send Modem Raw Interrupt Status
Value Description
1
Clear to Send used for software flow control.
0
No interrupt
This bit is cleared by writing a 1 to the CTSIC bit in the UARTICR
register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
0
RIRIS
RO
0
UART Ring Indicator Modem Raw Interrupt Status
Value Description
1
Ring Indicator used for software flow control.
0
No interrupt
This bit is cleared by writing a 1 to the RIIC bit in the UARTICR register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
July 25, 2011
637
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 12: UART Masked Interrupt Status (UARTMIS), offset 0x040
The UARTMIS register is the masked interrupt status register. On a read, this register gives the
current masked status value of the corresponding interrupt. A write has no effect.
Note that bits [3:0] are only implemented on UART1. These bits are reserved on UART0 and UART2.
UART Masked Interrupt Status (UARTMIS)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x040
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
3
2
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
LME5MIS LME1MIS LMSBMIS
Type
Reset
RO
0
RO
0
RO
0
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
10
9
8
7
6
5
4
OEMIS
BEMIS
PEMIS
FEMIS
RTMIS
TXMIS
RXMIS
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
DSRMIS DCDMIS
RO
0
RO
0
1
0
CTSMIS
RIMIS
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:16
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15
LME5MIS
RO
0
LIN Mode Edge 5 Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to the 5th falling edge
of the LIN Sync Field.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the LME5IC bit in the UARTICR
register.
14
LME1MIS
RO
0
LIN Mode Edge 1 Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to the 1st falling edge
of the LIN Sync Field.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the LME1IC bit in the UARTICR
register.
13
LMSBMIS
RO
0
LIN Mode Sync Break Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to the receipt of a LIN
Sync Break.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the LMSBIC bit in the UARTICR
register.
638
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
Description
12:11
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
10
OEMIS
RO
0
UART Overrun Error Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to an overrun error.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the OEIC bit in the UARTICR register.
9
BEMIS
RO
0
UART Break Error Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to a break error.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the BEIC bit in the UARTICR register.
8
PEMIS
RO
0
UART Parity Error Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to a parity error.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the PEIC bit in the UARTICR register.
7
FEMIS
RO
0
UART Framing Error Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to a framing error.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the FEIC bit in the UARTICR register.
6
RTMIS
RO
0
UART Receive Time-Out Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to a receive time out.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the RTIC bit in the UARTICR register.
5
TXMIS
RO
0
UART Transmit Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to passing through
the specified transmit FIFO level (if the EOT bit is clear) or due
to the transmission of the last data bit (if the EOT bit is set).
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the TXIC bit in the UARTICR register.
July 25, 2011
639
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Bit/Field
Name
Type
Reset
4
RXMIS
RO
0
Description
UART Receive Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to passing through
the specified receive FIFO level.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the RXIC bit in the UARTICR register.
3
DSRMIS
RO
0
UART Data Set Ready Modem Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to Data Set Ready.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the DSRIC bit in the UARTICR
register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
2
DCDMIS
RO
0
UART Data Carrier Detect Modem Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to Data Carrier Detect.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the DCDIC bit in the UARTICR
register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
1
CTSMIS
RO
0
UART Clear to Send Modem Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to Clear to Send.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the CTSIC bit in the UARTICR
register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
0
RIMIS
RO
0
UART Ring Indicator Modem Masked Interrupt Status
Value Description
1
An unmasked interrupt was signaled due to Ring Indicator.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the RIIC bit in the UARTICR register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
640
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 13: UART Interrupt Clear (UARTICR), offset 0x044
The UARTICR register is the interrupt clear register. On a write of 1, the corresponding interrupt
(both raw interrupt and masked interrupt, if enabled) is cleared. A write of 0 has no effect.
Note that bits [3:0] are only implemented on UART1. These bits are reserved on UART0 and UART2.
UART Interrupt Clear (UARTICR)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x044
Type W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
3
2
1
reserved
Type
Reset
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
12
11
15
14
13
LME5IC
LME1IC
LMSBIC
W1C
0
W1C
0
W1C
0
RO
0
reserved
RO
0
RO
0
RO
0
RO
0
RO
0
10
9
8
7
6
5
4
OEIC
BEIC
PEIC
FEIC
RTIC
TXIC
RXIC
W1C
0
W1C
0
W1C
0
W1C
0
W1C
0
W1C
0
W1C
0
DSRMIC DCDMIC CTSMIC
W1C
0
W1C
0
W1C
0
0
RIMIC
W1C
0
Bit/Field
Name
Type
Reset
Description
31:16
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15
LME5IC
W1C
0
LIN Mode Edge 5 Interrupt Clear
Writing a 1 to this bit clears the LME5RIS bit in the UARTRIS register
and the LME5MIS bit in the UARTMIS register.
14
LME1IC
W1C
0
LIN Mode Edge 1 Interrupt Clear
Writing a 1 to this bit clears the LME1RIS bit in the UARTRIS register
and the LME1MIS bit in the UARTMIS register.
13
LMSBIC
W1C
0
LIN Mode Sync Break Interrupt Clear
Writing a 1 to this bit clears the LMSBRIS bit in the UARTRIS register
and the LMSBMIS bit in the UARTMIS register.
12:11
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
10
OEIC
W1C
0
Overrun Error Interrupt Clear
Writing a 1 to this bit clears the OERIS bit in the UARTRIS register and
the OEMIS bit in the UARTMIS register.
9
BEIC
W1C
0
Break Error Interrupt Clear
Writing a 1 to this bit clears the BERIS bit in the UARTRIS register and
the BEMIS bit in the UARTMIS register.
8
PEIC
W1C
0
Parity Error Interrupt Clear
Writing a 1 to this bit clears the PERIS bit in the UARTRIS register and
the PEMIS bit in the UARTMIS register.
July 25, 2011
641
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Bit/Field
Name
Type
Reset
7
FEIC
W1C
0
Description
Framing Error Interrupt Clear
Writing a 1 to this bit clears the FERIS bit in the UARTRIS register and
the FEMIS bit in the UARTMIS register.
6
RTIC
W1C
0
Receive Time-Out Interrupt Clear
Writing a 1 to this bit clears the RTRIS bit in the UARTRIS register and
the RTMIS bit in the UARTMIS register.
5
TXIC
W1C
0
Transmit Interrupt Clear
Writing a 1 to this bit clears the TXRIS bit in the UARTRIS register and
the TXMIS bit in the UARTMIS register.
4
RXIC
W1C
0
Receive Interrupt Clear
Writing a 1 to this bit clears the RXRIS bit in the UARTRIS register and
the RXMIS bit in the UARTMIS register.
3
DSRMIC
W1C
0
UART Data Set Ready Modem Interrupt Clear
Writing a 1 to this bit clears the DSRRIS bit in the UARTRIS register
and the DSRMIS bit in the UARTMIS register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
2
DCDMIC
W1C
0
UART Data Carrier Detect Modem Interrupt Clear
Writing a 1 to this bit clears the DCDRIS bit in the UARTRIS register
and the DCDMIS bit in the UARTMIS register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
1
CTSMIC
W1C
0
UART Clear to Send Modem Interrupt Clear
Writing a 1 to this bit clears the CTSRIS bit in the UARTRIS register
and the CTSMIS bit in the UARTMIS register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
0
RIMIC
W1C
0
UART Ring Indicator Modem Interrupt Clear
Writing a 1 to this bit clears the RIRIS bit in the UARTRIS register and
the RIMIS bit in the UARTMIS register.
This bit is implemented only on UART1 and is reserved for UART0 and
UART2.
642
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 14: UART DMA Control (UARTDMACTL), offset 0x048
The UARTDMACTL register is the DMA control register.
UART DMA Control (UARTDMACTL)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x048
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
31:3
reserved
RO
2
DMAERR
R/W
RO
0
Reset
DMAERR TXDMAE RXDMAE
R/W
0
R/W
0
R/W
0
Description
0x00000.000 Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
DMA on Error
Value Description
1
TXDMAE
R/W
0
1
µDMA receive requests are automatically disabled when a
receive error occurs.
0
µDMA receive requests are unaffected when a receive error
occurs.
Transmit DMA Enable
Value Description
0
RXDMAE
R/W
0
1
µDMA for the transmit FIFO is enabled.
0
µDMA for the transmit FIFO is disabled.
Receive DMA Enable
Value Description
1
µDMA for the receive FIFO is enabled.
0
µDMA for the receive FIFO is disabled.
July 25, 2011
643
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 15: UART LIN Control (UARTLCTL), offset 0x090
The UARTLCTL register is the configures the operation of the UART when in LIN mode.
UART LIN Control (UARTLCTL)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x090
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
BLEN
Bit/Field
Name
Type
Reset
31:6
reserved
RO
0x0000.00
5:4
BLEN
R/W
0x0
reserved
RO
0
MASTER
RO
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Sync Break Length
Value Description
3:1
reserved
RO
0x0
0
MASTER
R/W
0
0x3
Sync break length is 16T bits
0x2
Sync break length is 15T bits
0x1
Sync break length is 14T bits
0x0
Sync break length is 13T bits (default)
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
LIN Master Enable
Value Description
1
The UART operates as a LIN master.
0
The UART operates as a LIN slave.
644
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 16: UART LIN Snap Shot (UARTLSS), offset 0x094
The UARTLSS register captures the free-running timer value when either the Sync Edge 1 or the
Sync Edge 5 is detected in LIN mode.
UART LIN Snap Shot (UARTLSS)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x094
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
TSS
Type
Reset
Bit/Field
Name
Type
Reset
Description
31:16
reserved
RO
0x0000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15:0
TSS
RO
0x0000
Timer Snap Shot
This field contains the value of the free-running timer when either the
Sync Edge 5 or the Sync Edge 1 was detected.
July 25, 2011
645
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 17: UART LIN Timer (UARTLTIM), offset 0x098
The UARTLTIM register contains the current timer value for the free-running timer that is used to
calculate the baud rate when in LIN slave mode. The value in this register is used along with the
value in the UART LIN Snap Shot (UARTLSS) register to adjust the baud rate to match that of the
master.
UART LIN Timer (UARTLTIM)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0x098
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
TIMER
Type
Reset
Bit/Field
Name
Type
Reset
Description
31:16
reserved
RO
0x0000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15:0
TIMER
RO
0x0000
Timer Value
This field contains the value of the free-running timer.
646
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 18: UART Peripheral Identification 4 (UARTPeriphID4), offset 0xFD0
The UARTPeriphIDn registers are hard-coded and the fields within the registers determine the
reset values.
UART Peripheral Identification 4 (UARTPeriphID4)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFD0
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID4
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID4
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Peripheral ID Register [7:0]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
647
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 19: UART Peripheral Identification 5 (UARTPeriphID5), offset 0xFD4
The UARTPeriphIDn registers are hard-coded and the fields within the registers determine the
reset values.
UART Peripheral Identification 5 (UARTPeriphID5)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFD4
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID5
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID5
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Peripheral ID Register [15:8]
Can be used by software to identify the presence of this peripheral.
648
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 20: UART Peripheral Identification 6 (UARTPeriphID6), offset 0xFD8
The UARTPeriphIDn registers are hard-coded and the fields within the registers determine the
reset values.
UART Peripheral Identification 6 (UARTPeriphID6)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFD8
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID6
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID6
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Peripheral ID Register [23:16]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
649
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 21: UART Peripheral Identification 7 (UARTPeriphID7), offset 0xFDC
The UARTPeriphIDn registers are hard-coded and the fields within the registers determine the
reset values.
UART Peripheral Identification 7 (UARTPeriphID7)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFDC
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID7
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID7
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Peripheral ID Register [31:24]
Can be used by software to identify the presence of this peripheral.
650
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 22: UART Peripheral Identification 0 (UARTPeriphID0), offset 0xFE0
The UARTPeriphIDn registers are hard-coded and the fields within the registers determine the
reset values.
UART Peripheral Identification 0 (UARTPeriphID0)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFE0
Type RO, reset 0x0000.0060
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
1
RO
1
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID0
RO
0x60
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Peripheral ID Register [7:0]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
651
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 23: UART Peripheral Identification 1 (UARTPeriphID1), offset 0xFE4
The UARTPeriphIDn registers are hard-coded and the fields within the registers determine the
reset values.
UART Peripheral Identification 1 (UARTPeriphID1)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFE4
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID1
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID1
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Peripheral ID Register [15:8]
Can be used by software to identify the presence of this peripheral.
652
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 24: UART Peripheral Identification 2 (UARTPeriphID2), offset 0xFE8
The UARTPeriphIDn registers are hard-coded and the fields within the registers determine the
reset values.
UART Peripheral Identification 2 (UARTPeriphID2)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFE8
Type RO, reset 0x0000.0018
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID2
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID2
RO
0x18
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Peripheral ID Register [23:16]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
653
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 25: UART Peripheral Identification 3 (UARTPeriphID3), offset 0xFEC
The UARTPeriphIDn registers are hard-coded and the fields within the registers determine the
reset values.
UART Peripheral Identification 3 (UARTPeriphID3)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFEC
Type RO, reset 0x0000.0001
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
PID3
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID3
RO
0x01
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART Peripheral ID Register [31:24]
Can be used by software to identify the presence of this peripheral.
654
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 26: UART PrimeCell Identification 0 (UARTPCellID0), offset 0xFF0
The UARTPCellIDn registers are hard-coded and the fields within the registers determine the reset
values.
UART PrimeCell Identification 0 (UARTPCellID0)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFF0
Type RO, reset 0x0000.000D
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID0
RO
0x0D
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART PrimeCell ID Register [7:0]
Provides software a standard cross-peripheral identification system.
July 25, 2011
655
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 27: UART PrimeCell Identification 1 (UARTPCellID1), offset 0xFF4
The UARTPCellIDn registers are hard-coded and the fields within the registers determine the reset
values.
UART PrimeCell Identification 1 (UARTPCellID1)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFF4
Type RO, reset 0x0000.00F0
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
1
RO
1
RO
1
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
CID1
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID1
RO
0xF0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART PrimeCell ID Register [15:8]
Provides software a standard cross-peripheral identification system.
656
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 28: UART PrimeCell Identification 2 (UARTPCellID2), offset 0xFF8
The UARTPCellIDn registers are hard-coded and the fields within the registers determine the reset
values.
UART PrimeCell Identification 2 (UARTPCellID2)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFF8
Type RO, reset 0x0000.0005
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID2
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID2
RO
0x05
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART PrimeCell ID Register [23:16]
Provides software a standard cross-peripheral identification system.
July 25, 2011
657
Texas Instruments-Production Data
Universal Asynchronous Receivers/Transmitters (UARTs)
Register 29: UART PrimeCell Identification 3 (UARTPCellID3), offset 0xFFC
The UARTPCellIDn registers are hard-coded and the fields within the registers determine the reset
values.
UART PrimeCell Identification 3 (UARTPCellID3)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
Offset 0xFFC
Type RO, reset 0x0000.00B1
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
0
RO
1
RO
1
RO
0
RO
0
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID3
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID3
RO
0xB1
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
UART PrimeCell ID Register [31:24]
Provides software a standard cross-peripheral identification system.
658
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
14
Synchronous Serial Interface (SSI)
®
The Stellaris microcontroller includes two Synchronous Serial Interface (SSI) modules. Each SSI
is a master or slave interface for synchronous serial communication with peripheral devices that
have either Freescale SPI, MICROWIRE, or Texas Instruments synchronous serial interfaces.
The Stellaris LM3S1G58 controller includes two SSI modules with the following features:
■ Programmable interface operation for Freescale SPI, MICROWIRE, or Texas Instruments
synchronous serial interfaces
■ Master or slave operation
■ Programmable clock bit rate and prescaler
■ Separate transmit and receive FIFOs, each 16 bits wide and 8 locations deep
■ Programmable data frame size from 4 to 16 bits
■ Internal loopback test mode for diagnostic/debug testing
■ Standard FIFO-based interrupts and End-of-Transmission interrupt
■ Efficient transfers using Micro Direct Memory Access Controller (µDMA)
– Separate channels for transmit and receive
– Receive single request asserted when data is in the FIFO; burst request asserted when FIFO
contains 4 entries
– Transmit single request asserted when there is space in the FIFO; burst request asserted
when FIFO contains 4 entries
July 25, 2011
659
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
14.1
Block Diagram
Figure 14-1. SSI Module Block Diagram
DMA Request
DMA Control
SSIDMACTL
Interrupt
Interrupt Control
TxFIFO
8 x 16
SSIIM
SSIMIS
SSIRIS
SSIICR
.
.
.
Control/Status
SSITx
SSICR0
SSICR1
SSISR
SSIRx
Transmit/
Receive
Logic
SSIDR
RxFIFO
8 x 16
Clock Prescaler
System Clock
SSIClk
SSIFss
.
.
.
SSICPSR
Identification Registers
SSIPCellID0
SSIPCellID1
SSIPCellID2
SSIPCellID3
14.2
SSIPeriphID0
SSIPeriphID1
SSIPeriphID2
SSIPeriphID3
SSIPeriphID4
SSIPeriphID5
SSIPeriphID6
SSIPeriphID7
Signal Description
The following table lists the external signals of the SSI module and describes the function of each.
The SSI signals are alternate functions for some GPIO signals and default to be GPIO signals at
reset., with the exception of the SSI0Clk, SSI0Fss, SSI0Rx, and SSI0Tx pins which default to
the SSI function. The column in the table below titled "Pin Mux/Pin Assignment" lists the possible
GPIO pin placements for the SSI signals. The AFSEL bit in the GPIO Alternate Function Select
(GPIOAFSEL) register (page 418) should be set to choose the SSI function. The number in
660
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
parentheses is the encoding that must be programmed into the PMCn field in the GPIO Port Control
(GPIOPCTL) register (page 435) to assign the SSI signal to the specified GPIO port pin. For more
information on configuring GPIOs, see “General-Purpose Input/Outputs (GPIOs)” on page 395.
Table 14-1. Signals for SSI (100LQFP)
Pin Name
SSI0Clk
Pin Number Pin Mux / Pin
Assignment
28
a
Pin Type
Buffer Type
PA2 (1)
I/O
TTL
Description
SSI module 0 clock.
SSI0Fss
29
PA3 (1)
I/O
TTL
SSI module 0 frame.
SSI0Rx
30
PA4 (1)
I
TTL
SSI module 0 receive.
SSI0Tx
31
PA5 (1)
O
TTL
SSI module 0 transmit.
SSI1Clk
60
72
PF2 (9)
PE0 (2)
I/O
TTL
SSI module 1 clock.
SSI1Fss
59
73
PF3 (9)
PE1 (2)
I/O
TTL
SSI module 1 frame.
SSI1Rx
58
74
PF4 (9)
PE2 (2)
I
TTL
SSI module 1 receive.
SSI1Tx
46
75
PF5 (9)
PE3 (2)
O
TTL
SSI module 1 transmit.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 14-2. Signals for SSI (108BGA)
Pin Name
SSI0Clk
Pin Number Pin Mux / Pin
Assignment
M4
a
Pin Type
Buffer Type
PA2 (1)
I/O
TTL
Description
SSI module 0 clock.
SSI0Fss
L4
PA3 (1)
I/O
TTL
SSI module 0 frame.
SSI0Rx
L5
PA4 (1)
I
TTL
SSI module 0 receive.
SSI0Tx
M5
PA5 (1)
O
TTL
SSI module 0 transmit.
SSI1Clk
J11
A11
PF2 (9)
PE0 (2)
I/O
TTL
SSI module 1 clock.
SSI1Fss
J12
B12
PF3 (9)
PE1 (2)
I/O
TTL
SSI module 1 frame.
SSI1Rx
L9
B11
PF4 (9)
PE2 (2)
I
TTL
SSI module 1 receive.
SSI1Tx
L8
A12
PF5 (9)
PE3 (2)
O
TTL
SSI module 1 transmit.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
14.3
Functional Description
The SSI performs serial-to-parallel conversion on data received from a peripheral device. The CPU
accesses data, control, and status information. The transmit and receive paths are buffered with
internal FIFO memories allowing up to eight 16-bit values to be stored independently in both transmit
and receive modes. The SSI also supports the µDMA interface. The transmit and receive FIFOs
can be programmed as destination/source addresses in the µDMA module. µDMA operation is
enabled by setting the appropriate bit(s) in the SSIDMACTL register (see page 688).
July 25, 2011
661
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
14.3.1
Bit Rate Generation
The SSI includes a programmable bit rate clock divider and prescaler to generate the serial output
clock. Bit rates are supported to 2 MHz and higher, although maximum bit rate is determined by
peripheral devices.
The serial bit rate is derived by dividing down the input clock (SysClk). The clock is first divided by
an even prescale value CPSDVSR from 2 to 254, which is programmed in the SSI Clock Prescale
(SSICPSR) register (see page 681). The clock is further divided by a value from 1 to 256, which is
1 + SCR, where SCR is the value programmed in the SSI Control 0 (SSICR0) register (see page 674).
The frequency of the output clock SSIClk is defined by:
SSIClk = SysClk / (CPSDVSR * (1 + SCR))
Note:
For master mode, the system clock must be at least two times faster than the SSIClk, with
the restriction that SSIClk cannot be faster than 25 MHz. For slave mode, the system clock
must be at least 12 times faster than the SSIClk.
See “Synchronous Serial Interface (SSI)” on page 797 to view SSI timing parameters.
14.3.2
FIFO Operation
14.3.2.1
Transmit FIFO
The common transmit FIFO is a 16-bit wide, 8-locations deep, first-in, first-out memory buffer. The
CPU writes data to the FIFO by writing the SSI Data (SSIDR) register (see page 678), and data is
stored in the FIFO until it is read out by the transmission logic.
When configured as a master or a slave, parallel data is written into the transmit FIFO prior to serial
conversion and transmission to the attached slave or master, respectively, through the SSITx pin.
In slave mode, the SSI transmits data each time the master initiates a transaction. If the transmit
FIFO is empty and the master initiates, the slave transmits the 8th most recent value in the transmit
FIFO. If less than 8 values have been written to the transmit FIFO since the SSI module clock was
enabled using the SSI bit in the RGCG1 register, then 0 is transmitted. Care should be taken to
ensure that valid data is in the FIFO as needed. The SSI can be configured to generate an interrupt
or a µDMA request when the FIFO is empty.
14.3.2.2
Receive FIFO
The common receive FIFO is a 16-bit wide, 8-locations deep, first-in, first-out memory buffer.
Received data from the serial interface is stored in the buffer until read out by the CPU, which
accesses the read FIFO by reading the SSIDR register.
When configured as a master or slave, serial data received through the SSIRx pin is registered
prior to parallel loading into the attached slave or master receive FIFO, respectively.
14.3.3
Interrupts
The SSI can generate interrupts when the following conditions are observed:
■ Transmit FIFO service (when the transmit FIFO is half full or less)
■ Receive FIFO service (when the receive FIFO is half full or more)
■ Receive FIFO time-out
■ Receive FIFO overrun
662
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ End of transmission
All of the interrupt events are ORed together before being sent to the interrupt controller, so the SSI
generates a single interrupt request to the controller regardless of the number of active interrupts.
Each of the four individual maskable interrupts can be masked by clearing the appropriate bit in the
SSI Interrupt Mask (SSIIM) register (see page 682). Setting the appropriate mask bit enables the
interrupt.
The individual outputs, along with a combined interrupt output, allow use of either a global interrupt
service routine or modular device drivers to handle interrupts. The transmit and receive dynamic
dataflow interrupts have been separated from the status interrupts so that data can be read or written
in response to the FIFO trigger levels. The status of the individual interrupt sources can be read
from the SSI Raw Interrupt Status (SSIRIS) and SSI Masked Interrupt Status (SSIMIS) registers
(see page 683 and page 685, respectively).
The receive FIFO has a time-out period that is 32 periods at the rate of SSIClk (whether or not
SSIClk is currently active) and is started when the RX FIFO goes from EMPTY to not-EMPTY. If
the RX FIFO is emptied before 32 clocks have passed, the time-out period is reset. As a result, the
ISR should clear the Receive FIFO Time-out Interrupt just after reading out the RX FIFO by writing
a 1 to the RTIC bit in the SSI Interrupt Clear (SSIICR) register. The interrupt should not be cleared
so late that the ISR returns before the interrupt is actually cleared, or the ISR may be re-activated
unnecessarily.
The End-of-Transmission (EOT) interrupt indicates that the data has been transmitted completely.
This interrupt can be used to indicate when it is safe to turn off the SSI module clock or enter sleep
mode. In addition, because transmitted data and received data complete at exactly the same time,
the interrupt can also indicate that read data is ready immediately, without waiting for the receive
FIFO time-out period to complete.
14.3.4
Frame Formats
Each data frame is between 4 and 16 bits long, depending on the size of data programmed, and is
transmitted starting with the MSB. There are three basic frame types that can be selected:
■ Texas Instruments synchronous serial
■ Freescale SPI
■ MICROWIRE
For all three formats, the serial clock (SSIClk) is held inactive while the SSI is idle, and SSIClk
transitions at the programmed frequency only during active transmission or reception of data. The
idle state of SSIClk is utilized to provide a receive timeout indication that occurs when the receive
FIFO still contains data after a timeout period.
For Freescale SPI and MICROWIRE frame formats, the serial frame (SSIFss) pin is active Low,
and is asserted (pulled down) during the entire transmission of the frame.
For Texas Instruments synchronous serial frame format, the SSIFss pin is pulsed for one serial
clock period starting at its rising edge, prior to the transmission of each frame. For this frame format,
both the SSI and the off-chip slave device drive their output data on the rising edge of SSIClk and
latch data from the other device on the falling edge.
Unlike the full-duplex transmission of the other two frame formats, the MICROWIRE format uses a
special master-slave messaging technique which operates at half-duplex. In this mode, when a
frame begins, an 8-bit control message is transmitted to the off-chip slave. During this transmit, no
July 25, 2011
663
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
incoming data is received by the SSI. After the message has been sent, the off-chip slave decodes
it and, after waiting one serial clock after the last bit of the 8-bit control message has been sent,
responds with the requested data. The returned data can be 4 to 16 bits in length, making the total
frame length anywhere from 13 to 25 bits.
14.3.4.1
Texas Instruments Synchronous Serial Frame Format
Figure 14-2 on page 664 shows the Texas Instruments synchronous serial frame format for a single
transmitted frame.
Figure 14-2. TI Synchronous Serial Frame Format (Single Transfer)
SSIClk
SSIFss
SSITx/SSIRx
MSB
LSB
4 to 16 bits
In this mode, SSIClk and SSIFss are forced Low, and the transmit data line SSITx is tristated
whenever the SSI is idle. Once the bottom entry of the transmit FIFO contains data, SSIFss is
pulsed High for one SSIClk period. The value to be transmitted is also transferred from the transmit
FIFO to the serial shift register of the transmit logic. On the next rising edge of SSIClk, the MSB
of the 4 to 16-bit data frame is shifted out on the SSITx pin. Likewise, the MSB of the received data
is shifted onto the SSIRx pin by the off-chip serial slave device.
Both the SSI and the off-chip serial slave device then clock each data bit into their serial shifter on
each falling edge of SSIClk. The received data is transferred from the serial shifter to the receive
FIFO on the first rising edge of SSIClk after the LSB has been latched.
Figure 14-3 on page 664 shows the Texas Instruments synchronous serial frame format when
back-to-back frames are transmitted.
Figure 14-3. TI Synchronous Serial Frame Format (Continuous Transfer)
SSIClk
SSIFss
SSITx/SSIRx
MSB
LSB
4 to 16 bits
664
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
14.3.4.2
Freescale SPI Frame Format
The Freescale SPI interface is a four-wire interface where the SSIFss signal behaves as a slave
select. The main feature of the Freescale SPI format is that the inactive state and phase of the
SSIClk signal are programmable through the SPO and SPH bits in the SSISCR0 control register.
SPO Clock Polarity Bit
When the SPO clock polarity control bit is clear, it produces a steady state Low value on the SSIClk
pin. If the SPO bit is set, a steady state High value is placed on the SSIClk pin when data is not
being transferred.
SPH Phase Control Bit
The SPH phase control bit selects the clock edge that captures data and allows it to change state.
The state of this bit has the most impact on the first bit transmitted by either allowing or not allowing
a clock transition before the first data capture edge. When the SPH phase control bit is clear, data
is captured on the first clock edge transition. If the SPH bit is set, data is captured on the second
clock edge transition.
14.3.4.3
Freescale SPI Frame Format with SPO=0 and SPH=0
Single and continuous transmission signal sequences for Freescale SPI format with SPO=0 and
SPH=0 are shown in Figure 14-4 on page 665 and Figure 14-5 on page 665.
Figure 14-4. Freescale SPI Format (Single Transfer) with SPO=0 and SPH=0
SSIClk
SSIFss
SSIRx
LSB
MSB
Q
4 to 16 bits
SSITx
MSB
Note:
LSB
Q is undefined.
Figure 14-5. Freescale SPI Format (Continuous Transfer) with SPO=0 and SPH=0
SSIClk
SSIFss
SSIRx LSB
LSB
MSB
MSB
4 to16 bits
SSITx LSB
MSB
LSB
MSB
In this configuration, during idle periods:
■ SSIClk is forced Low
July 25, 2011
665
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
■ SSIFss is forced High
■ The transmit data line SSITx is arbitrarily forced Low
■ When the SSI is configured as a master, it enables the SSIClk pad
■ When the SSI is configured as a slave, it disables the SSIClk pad
If the SSI is enabled and valid data is in the transmit FIFO, the start of transmission is signified by
the SSIFss master signal being driven Low, causing slave data to be enabled onto the SSIRx input
line of the master. The master SSITx output pad is enabled.
One half SSIClk period later, valid master data is transferred to the SSITx pin. Once both the
master and slave data have been set, the SSIClk master clock pin goes High after one additional
half SSIClk period.
The data is now captured on the rising and propagated on the falling edges of the SSIClk signal.
In the case of a single word transmission, after all bits of the data word have been transferred, the
SSIFss line is returned to its idle High state one SSIClk period after the last bit has been captured.
However, in the case of continuous back-to-back transmissions, the SSIFss signal must be pulsed
High between each data word transfer because the slave select pin freezes the data in its serial
peripheral register and does not allow it to be altered if the SPH bit is clear. Therefore, the master
device must raise the SSIFss pin of the slave device between each data transfer to enable the
serial peripheral data write. On completion of the continuous transfer, the SSIFss pin is returned
to its idle state one SSIClk period after the last bit has been captured.
14.3.4.4
Freescale SPI Frame Format with SPO=0 and SPH=1
The transfer signal sequence for Freescale SPI format with SPO=0 and SPH=1 is shown in Figure
14-6 on page 666, which covers both single and continuous transfers.
Figure 14-6. Freescale SPI Frame Format with SPO=0 and SPH=1
SSIClk
SSIFss
SSIRx
Q
Q
MSB
LSB
Q
4 to 16 bits
SSITx
LSB
MSB
Note:
Q is undefined.
In this configuration, during idle periods:
■ SSIClk is forced Low
■ SSIFss is forced High
■ The transmit data line SSITx is arbitrarily forced Low
■ When the SSI is configured as a master, it enables the SSIClk pad
666
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ When the SSI is configured as a slave, it disables the SSIClk pad
If the SSI is enabled and valid data is in the transmit FIFO, the start of transmission is signified by
the SSIFss master signal being driven Low. The master SSITx output is enabled. After an additional
one-half SSIClk period, both master and slave valid data are enabled onto their respective
transmission lines. At the same time, the SSIClk is enabled with a rising edge transition.
Data is then captured on the falling edges and propagated on the rising edges of the SSIClk signal.
In the case of a single word transfer, after all bits have been transferred, the SSIFss line is returned
to its idle High state one SSIClk period after the last bit has been captured.
For continuous back-to-back transfers, the SSIFss pin is held Low between successive data words,
and termination is the same as that of the single word transfer.
14.3.4.5
Freescale SPI Frame Format with SPO=1 and SPH=0
Single and continuous transmission signal sequences for Freescale SPI format with SPO=1 and
SPH=0 are shown in Figure 14-7 on page 667 and Figure 14-8 on page 667.
Figure 14-7. Freescale SPI Frame Format (Single Transfer) with SPO=1 and SPH=0
SSIClk
SSIFss
SSIRx
MSB
LSB
Q
4 to 16 bits
SSITx
LSB
MSB
Note:
Q is undefined.
Figure 14-8. Freescale SPI Frame Format (Continuous Transfer) with SPO=1 and SPH=0
SSIClk
SSIFss
SSITx/SSIRx
MSB
LSB
LSB
MSB
4 to 16 bits
In this configuration, during idle periods:
■ SSIClk is forced High
■ SSIFss is forced High
■ The transmit data line SSITx is arbitrarily forced Low
■ When the SSI is configured as a master, it enables the SSIClk pad
■ When the SSI is configured as a slave, it disables the SSIClk pad
July 25, 2011
667
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
If the SSI is enabled and valid data is in the transmit FIFO, the start of transmission is signified by
the SSIFss master signal being driven Low, causing slave data to be immediately transferred onto
the SSIRx line of the master. The master SSITx output pad is enabled.
One-half period later, valid master data is transferred to the SSITx line. Once both the master and
slave data have been set, the SSIClk master clock pin becomes Low after one additional half
SSIClk period, meaning that data is captured on the falling edges and propagated on the rising
edges of the SSIClk signal.
In the case of a single word transmission, after all bits of the data word are transferred, the SSIFss
line is returned to its idle High state one SSIClk period after the last bit has been captured.
However, in the case of continuous back-to-back transmissions, the SSIFss signal must be pulsed
High between each data word transfer because the slave select pin freezes the data in its serial
peripheral register and does not allow it to be altered if the SPH bit is clear. Therefore, the master
device must raise the SSIFss pin of the slave device between each data transfer to enable the
serial peripheral data write. On completion of the continuous transfer, the SSIFss pin is returned
to its idle state one SSIClk period after the last bit has been captured.
14.3.4.6
Freescale SPI Frame Format with SPO=1 and SPH=1
The transfer signal sequence for Freescale SPI format with SPO=1 and SPH=1 is shown in Figure
14-9 on page 668, which covers both single and continuous transfers.
Figure 14-9. Freescale SPI Frame Format with SPO=1 and SPH=1
SSIClk
SSIFss
SSIRx
Q
MSB
LSB
Q
4 to 16 bits
MSB
SSITx
Note:
LSB
Q is undefined.
In this configuration, during idle periods:
■ SSIClk is forced High
■ SSIFss is forced High
■ The transmit data line SSITx is arbitrarily forced Low
■ When the SSI is configured as a master, it enables the SSIClk pad
■ When the SSI is configured as a slave, it disables the SSIClk pad
If the SSI is enabled and valid data is in the transmit FIFO, the start of transmission is signified by
the SSIFss master signal being driven Low. The master SSITx output pad is enabled. After an
additional one-half SSIClk period, both master and slave data are enabled onto their respective
transmission lines. At the same time, SSIClk is enabled with a falling edge transition. Data is then
captured on the rising edges and propagated on the falling edges of the SSIClk signal.
668
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
After all bits have been transferred, in the case of a single word transmission, the SSIFss line is
returned to its idle high state one SSIClk period after the last bit has been captured.
For continuous back-to-back transmissions, the SSIFss pin remains in its active Low state until the
final bit of the last word has been captured and then returns to its idle state as described above.
For continuous back-to-back transfers, the SSIFss pin is held Low between successive data words
and termination is the same as that of the single word transfer.
14.3.4.7
MICROWIRE Frame Format
Figure 14-10 on page 669 shows the MICROWIRE frame format for a single frame. Figure
14-11 on page 670 shows the same format when back-to-back frames are transmitted.
Figure 14-10. MICROWIRE Frame Format (Single Frame)
SSIClk
SSIFss
SSITx
LSB
MSB
8-bit control
0
SSIRx
MSB
LSB
4 to 16 bits
output data
MICROWIRE format is very similar to SPI format, except that transmission is half-duplex instead of
full-duplex and uses a master-slave message passing technique. Each serial transmission begins
with an 8-bit control word that is transmitted from the SSI to the off-chip slave device. During this
transmission, no incoming data is received by the SSI. After the message has been sent, the off-chip
slave decodes it and, after waiting one serial clock after the last bit of the 8-bit control message has
been sent, responds with the required data. The returned data is 4 to 16 bits in length, making the
total frame length anywhere from 13 to 25 bits.
In this configuration, during idle periods:
■ SSIClk is forced Low
■ SSIFss is forced High
■ The transmit data line SSITx is arbitrarily forced Low
A transmission is triggered by writing a control byte to the transmit FIFO. The falling edge of SSIFss
causes the value contained in the bottom entry of the transmit FIFO to be transferred to the serial
shift register of the transmit logic and the MSB of the 8-bit control frame to be shifted out onto the
SSITx pin. SSIFss remains Low for the duration of the frame transmission. The SSIRx pin remains
tristated during this transmission.
The off-chip serial slave device latches each control bit into its serial shifter on each rising edge of
SSIClk. After the last bit is latched by the slave device, the control byte is decoded during a one
clock wait-state, and the slave responds by transmitting data back to the SSI. Each bit is driven onto
the SSIRx line on the falling edge of SSIClk. The SSI in turn latches each bit on the rising edge
of SSIClk. At the end of the frame, for single transfers, the SSIFss signal is pulled High one clock
period after the last bit has been latched in the receive serial shifter, causing the data to be transferred
to the receive FIFO.
July 25, 2011
669
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Note:
The off-chip slave device can tristate the receive line either on the falling edge of SSIClk
after the LSB has been latched by the receive shifter or when the SSIFss pin goes High.
For continuous transfers, data transmission begins and ends in the same manner as a single transfer.
However, the SSIFss line is continuously asserted (held Low) and transmission of data occurs
back-to-back. The control byte of the next frame follows directly after the LSB of the received data
from the current frame. Each of the received values is transferred from the receive shifter on the
falling edge of SSIClk, after the LSB of the frame has been latched into the SSI.
Figure 14-11. MICROWIRE Frame Format (Continuous Transfer)
SSIClk
SSIFss
SSITx
LSB
MSB
LSB
8-bit control
SSIRx
0
MSB
MSB
LSB
4 to 16 bits
output data
In the MICROWIRE mode, the SSI slave samples the first bit of receive data on the rising edge of
SSIClk after SSIFss has gone Low. Masters that drive a free-running SSIClk must ensure that
the SSIFss signal has sufficient setup and hold margins with respect to the rising edge of SSIClk.
Figure 14-12 on page 670 illustrates these setup and hold time requirements. With respect to the
SSIClk rising edge on which the first bit of receive data is to be sampled by the SSI slave, SSIFss
must have a setup of at least two times the period of SSIClk on which the SSI operates. With
respect to the SSIClk rising edge previous to this edge, SSIFss must have a hold of at least one
SSIClk period.
Figure 14-12. MICROWIRE Frame Format, SSIFss Input Setup and Hold Requirements
tSetup=(2*tSSIClk)
tHold=tSSIClk
SSIClk
SSIFss
SSIRx
First RX data to be
sampled by SSI slave
14.3.5
DMA Operation
The SSI peripheral provides an interface to the μDMA controller with separate channels for transmit
and receive. The µDMA operation of the SSI is enabled through the SSI DMA Control (SSIDMACTL)
register. When µDMA operation is enabled, the SSI asserts a µDMA request on the receive or
transmit channel when the associated FIFO can transfer data. For the receive channel, a single
transfer request is asserted whenever any data is in the receive FIFO. A burst transfer request is
asserted whenever the amount of data in the receive FIFO is 4 or more items. For the transmit
channel, a single transfer request is asserted whenever at least one empty location is in the transmit
FIFO. The burst request is asserted whenever the transmit FIFO has 4 or more empty slots. The
670
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
single and burst µDMA transfer requests are handled automatically by the μDMA controller depending
how the µDMA channel is configured. To enable µDMA operation for the receive channel, the
RXDMAE bit of the DMA Control (SSIDMACTL) register should be set. To enable µDMA operation
for the transmit channel, the TXDMAE bit of SSIDMACTL should be set. If µDMA is enabled, then
the μDMA controller triggers an interrupt when a transfer is complete. The interrupt occurs on the
SSI interrupt vector. Therefore, if interrupts are used for SSI operation and µDMA is enabled, the
SSI interrupt handler must be designed to handle the μDMA completion interrupt.
See “Micro Direct Memory Access (μDMA)” on page 335 for more details about programming the
μDMA controller.
14.4
Initialization and Configuration
To enable and initialize the SSI, the following steps are necessary:
1. Enable the SSI module by setting the SSI bit in the RCGC1 register (see page 243).
2. Enable the clock to the appropriate GPIO module via the RCGC2 register (see page 251). To
find out which GPIO port to enable, refer to Table 17-5 on page 757.
3. Set the GPIO AFSEL bits for the appropriate pins (see page 418). To determine which GPIOs to
configure, see Table 17-4 on page 753.
4. Configure the PMCn fields in the GPIOPCTL register to assign the SSI signals to the appropriate
pins. See page 435 and Table 17-5 on page 757.
For each of the frame formats, the SSI is configured using the following steps:
1. Ensure that the SSE bit in the SSICR1 register is clear before making any configuration changes.
2. Select whether the SSI is a master or slave:
a. For master operations, set the SSICR1 register to 0x0000.0000.
b. For slave mode (output enabled), set the SSICR1 register to 0x0000.0004.
c. For slave mode (output disabled), set the SSICR1 register to 0x0000.000C.
3. Configure the clock prescale divisor by writing the SSICPSR register.
4. Write the SSICR0 register with the following configuration:
■ Serial clock rate (SCR)
■ Desired clock phase/polarity, if using Freescale SPI mode (SPH and SPO)
■ The protocol mode: Freescale SPI, TI SSF, MICROWIRE (FRF)
■ The data size (DSS)
5. Optionally, configure the μDMA channel (see “Micro Direct Memory Access (μDMA)” on page 335)
and enable the DMA option(s) in the SSIDMACTL register.
6. Enable the SSI by setting the SSE bit in the SSICR1 register.
As an example, assume the SSI must be configured to operate with the following parameters:
July 25, 2011
671
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
■ Master operation
■ Freescale SPI mode (SPO=1, SPH=1)
■ 1 Mbps bit rate
■ 8 data bits
Assuming the system clock is 20 MHz, the bit rate calculation would be:
SSIClk = SysClk / (CPSDVSR * (1 + SCR))
1x106 = 20x106 / (CPSDVSR * (1 + SCR))
In this case, if CPSDVSR=0x2, SCR must be 0x9.
The configuration sequence would be as follows:
1. Ensure that the SSE bit in the SSICR1 register is clear.
2. Write the SSICR1 register with a value of 0x0000.0000.
3. Write the SSICPSR register with a value of 0x0000.0002.
4. Write the SSICR0 register with a value of 0x0000.09C7.
5. The SSI is then enabled by setting the SSE bit in the SSICR1 register.
14.5
Register Map
Table 14-3 on page 672 lists the SSI registers. The offset listed is a hexadecimal increment to the
register’s address, relative to that SSI module’s base address:
■ SSI0: 0x4000.8000
■ SSI1: 0x4000.9000
Note that the SSI module clock must be enabled before the registers can be programmed (see
page 243). There must be a delay of 3 system clocks after the SSI module clock is enabled before
any SSI module registers are accessed.
Note:
The SSI must be disabled (see the SSE bit in the SSICR1 register) before any of the control
registers are reprogrammed.
Table 14-3. SSI Register Map
Offset
Name
Type
Reset
Description
See
page
0x000
SSICR0
R/W
0x0000.0000
SSI Control 0
674
0x004
SSICR1
R/W
0x0000.0000
SSI Control 1
676
0x008
SSIDR
R/W
0x0000.0000
SSI Data
678
0x00C
SSISR
RO
0x0000.0003
SSI Status
679
0x010
SSICPSR
R/W
0x0000.0000
SSI Clock Prescale
681
0x014
SSIIM
R/W
0x0000.0000
SSI Interrupt Mask
682
672
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 14-3. SSI Register Map (continued)
Name
Type
Reset
0x018
SSIRIS
RO
0x0000.0008
SSI Raw Interrupt Status
683
0x01C
SSIMIS
RO
0x0000.0000
SSI Masked Interrupt Status
685
0x020
SSIICR
W1C
0x0000.0000
SSI Interrupt Clear
687
0x024
SSIDMACTL
R/W
0x0000.0000
SSI DMA Control
688
0xFD0
SSIPeriphID4
RO
0x0000.0000
SSI Peripheral Identification 4
689
0xFD4
SSIPeriphID5
RO
0x0000.0000
SSI Peripheral Identification 5
690
0xFD8
SSIPeriphID6
RO
0x0000.0000
SSI Peripheral Identification 6
691
0xFDC
SSIPeriphID7
RO
0x0000.0000
SSI Peripheral Identification 7
692
0xFE0
SSIPeriphID0
RO
0x0000.0022
SSI Peripheral Identification 0
693
0xFE4
SSIPeriphID1
RO
0x0000.0000
SSI Peripheral Identification 1
694
0xFE8
SSIPeriphID2
RO
0x0000.0018
SSI Peripheral Identification 2
695
0xFEC
SSIPeriphID3
RO
0x0000.0001
SSI Peripheral Identification 3
696
0xFF0
SSIPCellID0
RO
0x0000.000D
SSI PrimeCell Identification 0
697
0xFF4
SSIPCellID1
RO
0x0000.00F0
SSI PrimeCell Identification 1
698
0xFF8
SSIPCellID2
RO
0x0000.0005
SSI PrimeCell Identification 2
699
0xFFC
SSIPCellID3
RO
0x0000.00B1
SSI PrimeCell Identification 3
700
14.6
Description
See
page
Offset
Register Descriptions
The remainder of this section lists and describes the SSI registers, in numerical order by address
offset.
July 25, 2011
673
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Register 1: SSI Control 0 (SSICR0), offset 0x000
The SSICR0 register contains bit fields that control various functions within the SSI module.
Functionality such as protocol mode, clock rate, and data size are configured in this register.
SSI Control 0 (SSICR0)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0x000
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
SPH
SPO
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
SCR
Type
Reset
Bit/Field
Name
Type
Reset
31:16
reserved
RO
0x0000
15:8
SCR
R/W
0x00
FRF
R/W
0
DSS
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI Serial Clock Rate
This bit field is used to generate the transmit and receive bit rate of the
SSI. The bit rate is:
BR=SysClk/(CPSDVSR * (1 + SCR))
where CPSDVSR is an even value from 2-254 programmed in the
SSICPSR register, and SCR is a value from 0-255.
7
SPH
R/W
0
SSI Serial Clock Phase
This bit is only applicable to the Freescale SPI Format.
The SPH control bit selects the clock edge that captures data and allows
it to change state. This bit has the most impact on the first bit transmitted
by either allowing or not allowing a clock transition before the first data
capture edge.
Value Description
6
SPO
R/W
0
0
Data is captured on the first clock edge transition.
1
Data is captured on the second clock edge transition.
SSI Serial Clock Polarity
Value Description
0
A steady state Low value is placed on the SSIClk pin.
1
A steady state High value is placed on the SSIClk pin when
data is not being transferred.
674
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
5:4
FRF
R/W
0x0
Description
SSI Frame Format Select
Value Frame Format
3:0
DSS
R/W
0x0
0x0
Freescale SPI Frame Format
0x1
Texas Instruments Synchronous Serial Frame Format
0x2
MICROWIRE Frame Format
0x3
Reserved
SSI Data Size Select
Value
Data Size
0x0-0x2 Reserved
0x3
4-bit data
0x4
5-bit data
0x5
6-bit data
0x6
7-bit data
0x7
8-bit data
0x8
9-bit data
0x9
10-bit data
0xA
11-bit data
0xB
12-bit data
0xC
13-bit data
0xD
14-bit data
0xE
15-bit data
0xF
16-bit data
July 25, 2011
675
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Register 2: SSI Control 1 (SSICR1), offset 0x004
The SSICR1 register contains bit fields that control various functions within the SSI module. Master
and slave mode functionality is controlled by this register.
SSI Control 1 (SSICR1)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0x004
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
EOT
SOD
MS
SSE
LBM
RO
0
RO
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:5
reserved
RO
0x0000.0
4
EOT
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
End of Transmission
Value Description
3
SOD
R/W
0
0
The TXRIS interrupt indicates that the transmit FIFO is half full
or less.
1
The End of Transmit interrupt mode for the TXRIS interrupt is
enabled.
SSI Slave Mode Output Disable
This bit is relevant only in the Slave mode (MS=1). In multiple-slave
systems, it is possible for the SSI master to broadcast a message to all
slaves in the system while ensuring that only one slave drives data onto
the serial output line. In such systems, the TXD lines from multiple slaves
could be tied together. To operate in such a system, the SOD bit can be
configured so that the SSI slave does not drive the SSITx pin.
Value Description
2
MS
R/W
0
0
SSI can drive the SSITx output in Slave mode.
1
SSI must not drive the SSITx output in Slave mode.
SSI Master/Slave Select
This bit selects Master or Slave mode and can be modified only when
the SSI is disabled (SSE=0).
Value Description
0
The SSI is configured as a master.
1
The SSI is configured as a slave.
676
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
1
SSE
R/W
0
Description
SSI Synchronous Serial Port Enable
Value Description
0
SSI operation is disabled.
1
SSI operation is enabled.
Note:
0
LBM
R/W
0
This bit must be cleared before any control registers
are reprogrammed.
SSI Loopback Mode
Value Description
0
Normal serial port operation enabled.
1
Output of the transmit serial shift register is connected internally
to the input of the receive serial shift register.
July 25, 2011
677
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Register 3: SSI Data (SSIDR), offset 0x008
Important: This register is read-sensitive. See the register description for details.
The SSIDR register is 16-bits wide. When the SSIDR register is read, the entry in the receive FIFO
that is pointed to by the current FIFO read pointer is accessed. When a data value is removed by
the SSI receive logic from the incoming data frame, it is placed into the entry in the receive FIFO
pointed to by the current FIFO write pointer.
When the SSIDR register is written to, the entry in the transmit FIFO that is pointed to by the write
pointer is written to. Data values are removed from the transmit FIFO one value at a time by the
transmit logic. Each data value is loaded into the transmit serial shifter, then serially shifted out onto
the SSITx pin at the programmed bit rate.
When a data size of less than 16 bits is selected, the user must right-justify data written to the
transmit FIFO. The transmit logic ignores the unused bits. Received data less than 16 bits is
automatically right-justified in the receive buffer.
When the SSI is programmed for MICROWIRE frame format, the default size for transmit data is
eight bits (the most significant byte is ignored). The receive data size is controlled by the programmer.
The transmit FIFO and the receive FIFO are not cleared even when the SSE bit in the SSICR1
register is cleared, allowing the software to fill the transmit FIFO before enabling the SSI.
SSI Data (SSIDR)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0x008
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
DATA
Type
Reset
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:16
reserved
RO
0x0000
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
15:0
DATA
R/W
0x0000
SSI Receive/Transmit Data
A read operation reads the receive FIFO. A write operation writes the
transmit FIFO.
Software must right-justify data when the SSI is programmed for a data
size that is less than 16 bits. Unused bits at the top are ignored by the
transmit logic. The receive logic automatically right-justifies the data.
678
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 4: SSI Status (SSISR), offset 0x00C
The SSISR register contains bits that indicate the FIFO fill status and the SSI busy status.
SSI Status (SSISR)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0x00C
Type RO, reset 0x0000.0003
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
BSY
RFF
RNE
TNF
TFE
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:5
reserved
RO
0x0000.00
4
BSY
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI Busy Bit
Value Description
3
RFF
RO
0
0
The SSI is idle.
1
The SSI is currently transmitting and/or receiving a frame, or
the transmit FIFO is not empty.
SSI Receive FIFO Full
Value Description
2
RNE
RO
0
0
The receive FIFO is not full.
1
The receive FIFO is full.
SSI Receive FIFO Not Empty
Value Description
1
TNF
RO
1
0
The receive FIFO is empty.
1
The receive FIFO is not empty.
SSI Transmit FIFO Not Full
Value Description
0
The transmit FIFO is full.
1
The transmit FIFO is not full.
July 25, 2011
679
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Bit/Field
Name
Type
Reset
0
TFE
RO
1
Description
SSI Transmit FIFO Empty
Value Description
0
The transmit FIFO is not empty.
1
The transmit FIFO is empty.
680
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 5: SSI Clock Prescale (SSICPSR), offset 0x010
The SSICPSR register specifies the division factor which is used to derive the SSIClk from the
system clock. The clock is further divided by a value from 1 to 256, which is 1 + SCR. SCR is
programmed in the SSICR0 register. The frequency of the SSIClk is defined by:
SSIClk = SysClk / (CPSDVSR * (1 + SCR))
The value programmed into this register must be an even number between 2 and 254. The
least-significant bit of the programmed number is hard-coded to zero. If an odd number is written
to this register, data read back from this register has the least-significant bit as zero.
SSI Clock Prescale (SSICPSR)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0x010
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
CPSDVSR
RO
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:8
reserved
RO
0x00
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7:0
CPSDVSR
R/W
0x00
SSI Clock Prescale Divisor
This value must be an even number from 2 to 254, depending on the
frequency of SSIClk. The LSB always returns 0 on reads.
July 25, 2011
681
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Register 6: SSI Interrupt Mask (SSIIM), offset 0x014
The SSIIM register is the interrupt mask set or clear register. It is a read/write register and all bits
are cleared on reset.
On a read, this register gives the current value of the mask on the corresponding interrupt. Setting
a bit sets the mask, preventing the interrupt from being signaled to the interrupt controller. Clearing
a bit clears the corresponding mask, enabling the interrupt to be sent to the interrupt controller.
SSI Interrupt Mask (SSIIM)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0x014
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
7
6
5
4
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
3
2
1
0
TXIM
RXIM
RTIM
RORIM
R/W
0
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:4
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
3
TXIM
R/W
0
SSI Transmit FIFO Interrupt Mask
Value Description
2
RXIM
R/W
0
0
The transmit FIFO interrupt is masked.
1
The transmit FIFO interrupt is not masked.
SSI Receive FIFO Interrupt Mask
Value Description
1
RTIM
R/W
0
0
The receive FIFO interrupt is masked.
1
The receive FIFO interrupt is not masked.
SSI Receive Time-Out Interrupt Mask
Value Description
0
RORIM
R/W
0
0
The receive FIFO time-out interrupt is masked.
1
The receive FIFO time-out interrupt is not masked.
SSI Receive Overrun Interrupt Mask
Value Description
0
The receive FIFO overrun interrupt is masked.
1
The receive FIFO overrun interrupt is not masked.
682
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 7: SSI Raw Interrupt Status (SSIRIS), offset 0x018
The SSIRIS register is the raw interrupt status register. On a read, this register gives the current
raw status value of the corresponding interrupt prior to masking. A write has no effect.
SSI Raw Interrupt Status (SSIRIS)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0x018
Type RO, reset 0x0000.0008
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
TXRIS
RXRIS
RTRIS
RORRIS
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
Description
31:4
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
3
TXRIS
RO
1
SSI Transmit FIFO Raw Interrupt Status
Value Description
0
No interrupt.
1
If the EOT bit in the SSICR1 register is clear, the transmit FIFO
is half full or less.
If the EOT bit is set, the transmit FIFO is empty, and the last bit
has been transmitted out of the serializer.
This bit is cleared when the transmit FIFO is more than half full (if the
EOT bit is clear) or when it has any data in it (if the EOT bit is set).
2
RXRIS
RO
0
SSI Receive FIFO Raw Interrupt Status
Value Description
0
No interrupt.
1
The receive FIFO is half full or more.
This bit is cleared when the receive FIFO is less than half full.
1
RTRIS
RO
0
SSI Receive Time-Out Raw Interrupt Status
Value Description
0
No interrupt.
1
The receive time-out has occurred.
This bit is cleared when a 1 is written to the RTIC bit in the SSI Interrupt
Clear (SSIICR) register.
July 25, 2011
683
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Bit/Field
Name
Type
Reset
0
RORRIS
RO
0
Description
SSI Receive Overrun Raw Interrupt Status
Value Description
0
No interrupt.
1
The receive FIFO has overflowed
This bit is cleared when a 1 is written to the RORIC bit in the SSI
Interrupt Clear (SSIICR) register.
684
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 8: SSI Masked Interrupt Status (SSIMIS), offset 0x01C
The SSIMIS register is the masked interrupt status register. On a read, this register gives the current
masked status value of the corresponding interrupt. A write has no effect.
SSI Masked Interrupt Status (SSIMIS)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0x01C
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
TXMIS
RXMIS
RTMIS
RORMIS
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
Description
31:4
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
3
TXMIS
RO
0
SSI Transmit FIFO Masked Interrupt Status
Value Description
0
An interrupt has not occurred or is masked.
1
An unmasked interrupt was signaled due to the transmit FIFO
being half full or less (if the EOT bit is clear) or due to the
transmission of the last data bit (if the EOT bit is set).
This bit is cleared when the transmit FIFO is more than half full (if the
EOT bit is clear) or when it has any data in it (if the EOT bit is set).
2
RXMIS
RO
0
SSI Receive FIFO Masked Interrupt Status
Value Description
0
An interrupt has not occurred or is masked.
1
An unmasked interrupt was signaled due to the receive FIFO
being half full or less.
This bit is cleared when the receive FIFO is less than half full.
1
RTMIS
RO
0
SSI Receive Time-Out Masked Interrupt Status
Value Description
0
An interrupt has not occurred or is masked.
1
An unmasked interrupt was signaled due to the receive time
out.
This bit is cleared when a 1 is written to the RTIC bit in the SSI Interrupt
Clear (SSIICR) register.
July 25, 2011
685
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Bit/Field
Name
Type
Reset
0
RORMIS
RO
0
Description
SSI Receive Overrun Masked Interrupt Status
Value Description
0
An interrupt has not occurred or is masked.
1
An unmasked interrupt was signaled due to the receive FIFO
overflowing.
This bit is cleared when a 1 is written to the RORIC bit in the SSI
Interrupt Clear (SSIICR) register.
686
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 9: SSI Interrupt Clear (SSIICR), offset 0x020
The SSIICR register is the interrupt clear register. On a write of 1, the corresponding interrupt is
cleared. A write of 0 has no effect.
SSI Interrupt Clear (SSIICR)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0x020
Type W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RTIC
RORIC
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
W1C
0
W1C
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
Description
31:2
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
1
RTIC
W1C
0
SSI Receive Time-Out Interrupt Clear
Writing a 1 to this bit clears the RTRIS bit in the SSIRIS register and
the RTMIS bit in the SSIMIS register.
0
RORIC
W1C
0
SSI Receive Overrun Interrupt Clear
Writing a 1 to this bit clears the RORRIS bit in the SSIRIS register and
the RORMIS bit in the SSIMIS register.
July 25, 2011
687
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Register 10: SSI DMA Control (SSIDMACTL), offset 0x024
The SSIDMACTL register is the µDMA control register.
SSI DMA Control (SSIDMACTL)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0x024
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:2
reserved
RO
0x0000.000
1
TXDMAE
R/W
0
TXDMAE RXDMAE
R/W
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Transmit DMA Enable
Value Description
0
RXDMAE
R/W
0
0
µDMA for the transmit FIFO is disabled.
1
µDMA for the transmit FIFO is enabled.
Receive DMA Enable
Value Description
0
µDMA for the receive FIFO is disabled.
1
µDMA for the receive FIFO is enabled.
688
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 11: SSI Peripheral Identification 4 (SSIPeriphID4), offset 0xFD0
The SSIPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
SSI Peripheral Identification 4 (SSIPeriphID4)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFD0
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID4
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID4
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI Peripheral ID Register [7:0]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
689
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Register 12: SSI Peripheral Identification 5 (SSIPeriphID5), offset 0xFD4
The SSIPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
SSI Peripheral Identification 5 (SSIPeriphID5)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFD4
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID5
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID5
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI Peripheral ID Register [15:8]
Can be used by software to identify the presence of this peripheral.
690
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 13: SSI Peripheral Identification 6 (SSIPeriphID6), offset 0xFD8
The SSIPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
SSI Peripheral Identification 6 (SSIPeriphID6)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFD8
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID6
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID6
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI Peripheral ID Register [23:16]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
691
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Register 14: SSI Peripheral Identification 7 (SSIPeriphID7), offset 0xFDC
The SSIPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
SSI Peripheral Identification 7 (SSIPeriphID7)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFDC
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID7
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID7
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI Peripheral ID Register [31:24]
Can be used by software to identify the presence of this peripheral.
692
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 15: SSI Peripheral Identification 0 (SSIPeriphID0), offset 0xFE0
The SSIPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
SSI Peripheral Identification 0 (SSIPeriphID0)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFE0
Type RO, reset 0x0000.0022
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
1
RO
0
RO
0
RO
0
RO
1
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID0
RO
0x22
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI Peripheral ID Register [7:0]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
693
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Register 16: SSI Peripheral Identification 1 (SSIPeriphID1), offset 0xFE4
The SSIPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
SSI Peripheral Identification 1 (SSIPeriphID1)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFE4
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID1
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID1
RO
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI Peripheral ID Register [15:8]
Can be used by software to identify the presence of this peripheral.
694
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 17: SSI Peripheral Identification 2 (SSIPeriphID2), offset 0xFE8
The SSIPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
SSI Peripheral Identification 2 (SSIPeriphID2)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFE8
Type RO, reset 0x0000.0018
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
PID2
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID2
RO
0x18
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI Peripheral ID Register [23:16]
Can be used by software to identify the presence of this peripheral.
July 25, 2011
695
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Register 18: SSI Peripheral Identification 3 (SSIPeriphID3), offset 0xFEC
The SSIPeriphIDn registers are hard-coded and the fields within the register determine the reset
value.
SSI Peripheral Identification 3 (SSIPeriphID3)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFEC
Type RO, reset 0x0000.0001
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
PID3
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
PID3
RO
0x01
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI Peripheral ID Register [31:24]
Can be used by software to identify the presence of this peripheral.
696
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 19: SSI PrimeCell Identification 0 (SSIPCellID0), offset 0xFF0
The SSIPCellIDn registers are hard-coded, and the fields within the register determine the reset
value.
SSI PrimeCell Identification 0 (SSIPCellID0)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFF0
Type RO, reset 0x0000.000D
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
1
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID0
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID0
RO
0x0D
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI PrimeCell ID Register [7:0]
Provides software a standard cross-peripheral identification system.
July 25, 2011
697
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Register 20: SSI PrimeCell Identification 1 (SSIPCellID1), offset 0xFF4
The SSIPCellIDn registers are hard-coded, and the fields within the register determine the reset
value.
SSI PrimeCell Identification 1 (SSIPCellID1)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFF4
Type RO, reset 0x0000.00F0
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
1
RO
1
RO
1
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
CID1
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID1
RO
0xF0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI PrimeCell ID Register [15:8]
Provides software a standard cross-peripheral identification system.
698
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 21: SSI PrimeCell Identification 2 (SSIPCellID2), offset 0xFF8
The SSIPCellIDn registers are hard-coded, and the fields within the register determine the reset
value.
SSI PrimeCell Identification 2 (SSIPCellID2)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFF8
Type RO, reset 0x0000.0005
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
1
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID2
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID2
RO
0x05
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI PrimeCell ID Register [23:16]
Provides software a standard cross-peripheral identification system.
July 25, 2011
699
Texas Instruments-Production Data
Synchronous Serial Interface (SSI)
Register 22: SSI PrimeCell Identification 3 (SSIPCellID3), offset 0xFFC
The SSIPCellIDn registers are hard-coded, and the fields within the register determine the reset
value.
SSI PrimeCell Identification 3 (SSIPCellID3)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
Offset 0xFFC
Type RO, reset 0x0000.00B1
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
1
RO
0
RO
1
RO
1
RO
0
RO
0
RO
0
RO
1
reserved
Type
Reset
reserved
Type
Reset
CID3
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
CID3
RO
0xB1
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SSI PrimeCell ID Register [31:24]
Provides software a standard cross-peripheral identification system.
700
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
15
Inter-Integrated Circuit (I2C) Interface
The Inter-Integrated Circuit (I2C) bus provides bi-directional data transfer through a two-wire design
(a serial data line SDA and a serial clock line SCL), and interfaces to external I2C devices such as
serial memory (RAMs and ROMs), networking devices, LCDs, tone generators, and so on. The I2C
bus may also be used for system testing and diagnostic purposes in product development and
manufacture. The LM3S1G58 microcontroller includes two I2C modules, providing the ability to
interact (both transmit and receive) with other I2C devices on the bus.
®
The Stellaris LM3S1G58 controller includes two I2C modules with the following features:
■ Devices on the I2C bus can be designated as either a master or a slave
– Supports both transmitting and receiving data as either a master or a slave
– Supports simultaneous master and slave operation
■ Four I2C modes
– Master transmit
– Master receive
– Slave transmit
– Slave receive
■ Two transmission speeds: Standard (100 Kbps) and Fast (400 Kbps)
■ Master and slave interrupt generation
– Master generates interrupts when a transmit or receive operation completes (or aborts due
to an error)
– Slave generates interrupts when data has been transferred or requested by a master or when
a START or STOP condition is detected
■ Master with arbitration and clock synchronization, multimaster support, and 7-bit addressing
mode
July 25, 2011
701
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
15.1
Block Diagram
Figure 15-1. I2C Block Diagram
I2CSCL
I2C Control
Interrupt
I2CMSA
I2CSOAR
I2CMCS
I2CSCSR
I2CMDR
I2CSDR
I2CMTPR
I2CSIMR
I2CMIMR
I2CSRIS
I2CMRIS
I2CSMIS
I2CMMIS
I2CSICR
I2C Master Core
I2CSDA
I2CSCL
2
I C I/O Select
I2CSDA
I2CSCL
I2C Slave Core
I2CMICR
I2CSDA
I2CMCR
15.2
Signal Description
The following table lists the external signals of the I2C interface and describes the function of each.
The I2C interface signals are alternate functions for some GPIO signals and default to be GPIO
signals at reset., with the exception of the I2C0SCL and I2CSDA pins which default to the I2C
function. The column in the table below titled "Pin Mux/Pin Assignment" lists the possible GPIO pin
placements for the I2C signals. The AFSEL bit in the GPIO Alternate Function Select (GPIOAFSEL)
register (page 418) should be set to choose the I2C function. The number in parentheses is the
encoding that must be programmed into the PMCn field in the GPIO Port Control (GPIOPCTL)
register (page 435) to assign the I2C signal to the specified GPIO port pin. Note that the I2C pins
should be set to open drain using the GPIO Open Drain Select (GPIOODR) register. For more
information on configuring GPIOs, see “General-Purpose Input/Outputs (GPIOs)” on page 395.
Table 15-1. Signals for I2C (100LQFP)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
I2C0SCL
70
PB2 (1)
I/O
OD
I2C module 0 clock.
I2C0SDA
71
PB3 (1)
I/O
OD
I2C module 0 data.
I2C1SCL
19
26
34
PG0 (3)
PA0 (8)
PA6 (1)
I/O
OD
I2C module 1 clock.
I2C1SDA
18
27
35
PG1 (3)
PA1 (8)
PA7 (1)
I/O
OD
I2C module 1 data.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 15-2. Signals for I2C (108BGA)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
I2C0SCL
C11
PB2 (1)
I/O
OD
I2C module 0 clock.
I2C0SDA
C12
PB3 (1)
I/O
OD
I2C module 0 data.
702
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 15-2. Signals for I2C (108BGA) (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
I2C1SCL
K1
L3
L6
PG0 (3)
PA0 (8)
PA6 (1)
I/O
OD
I2C module 1 clock.
I2C1SDA
K2
M3
M6
PG1 (3)
PA1 (8)
PA7 (1)
I/O
OD
I2C module 1 data.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
15.3
Functional Description
Each I2C module is comprised of both master and slave functions. For proper operation, the SDA
and SCL pins must be configured as open-drain signals. A typical I2C bus configuration is shown
in Figure 15-2.
See “Inter-Integrated Circuit (I2C) Interface” on page 799 for I2C timing diagrams.
Figure 15-2. I2C Bus Configuration
RPUP
SCL
SDA
I2C Bus
I2CSCL
I2CSDA
Stellaris®
15.3.1
RPUP
SCL
SDA
3rd Party Device
with I2C Interface
SCL
SDA
3rd Party Device
with I2C Interface
I2C Bus Functional Overview
The I2C bus uses only two signals: SDA and SCL, named I2CSDA and I2CSCL on Stellaris
microcontrollers. SDA is the bi-directional serial data line and SCL is the bi-directional serial clock
line. The bus is considered idle when both lines are High.
Every transaction on the I2C bus is nine bits long, consisting of eight data bits and a single
acknowledge bit. The number of bytes per transfer (defined as the time between a valid START
and STOP condition, described in “START and STOP Conditions” on page 703) is unrestricted, but
each byte has to be followed by an acknowledge bit, and data must be transferred MSB first. When
a receiver cannot receive another complete byte, it can hold the clock line SCL Low and force the
transmitter into a wait state. The data transfer continues when the receiver releases the clock SCL.
15.3.1.1
START and STOP Conditions
The protocol of the I2C bus defines two states to begin and end a transaction: START and STOP.
A High-to-Low transition on the SDA line while the SCL is High is defined as a START condition,
and a Low-to-High transition on the SDA line while SCL is High is defined as a STOP condition.
The bus is considered busy after a START condition and free after a STOP condition. See Figure
15-3.
July 25, 2011
703
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Figure 15-3. START and STOP Conditions
SDA
SDA
SCL
SCL
START
condition
STOP
condition
The STOP bit determines if the cycle stops at the end of the data cycle or continues on to a repeated
START condition. To generate a single transmit cycle, the I2C Master Slave Address (I2CMSA)
register is written with the desired address, the R/S bit is cleared, and the Control register is written
with ACK=X (0 or 1), STOP=1, START=1, and RUN=1 to perform the operation and stop. When the
operation is completed (or aborted due an error), the interrupt pin becomes active and the data may
be read from the I2C Master Data (I2CMDR) register. When the I2C module operates in Master
receiver mode, the ACK bit is normally set causing the I2C bus controller to transmit an acknowledge
automatically after each byte. This bit must be cleared when the I2C bus controller requires no further
data to be transmitted from the slave transmitter.
When operating in slave mode, two bits in the I2C Slave Raw Interrupt Status (I2CSRIS) register
indicate detection of start and stop conditions on the bus; while two bits in the I2C Slave Masked
Interrupt Status (I2CSMIS) register allow start and stop conditions to be promoted to controller
interrupts (when interrupts are enabled).
15.3.1.2
Data Format with 7-Bit Address
Data transfers follow the format shown in Figure 15-4. After the START condition, a slave address
is transmitted. This address is 7-bits long followed by an eighth bit, which is a data direction bit (R/S
bit in the I2CMSA register). If the R/S bit is clear, it indicates a transmit operation (send), and if it
is set, it indicates a request for data (receive). A data transfer is always terminated by a STOP
condition generated by the master, however, a master can initiate communications with another
device on the bus by generating a repeated START condition and addressing another slave without
first generating a STOP condition. Various combinations of receive/transmit formats are then possible
within a single transfer.
Figure 15-4. Complete Data Transfer with a 7-Bit Address
SDA
MSB
SCL
1
Start
2
LSB
R/S
ACK
7
8
9
MSB
1
2
Slave address
7
Data
LSB
ACK
8
9
Stop
The first seven bits of the first byte make up the slave address (see Figure 15-5). The eighth bit
determines the direction of the message. A zero in the R/S position of the first byte means that the
master transmits (sends) data to the selected slave, and a one in this position means that the master
receives data from the slave.
704
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 15-5. R/S Bit in First Byte
MSB
LSB
R/S
Slave address
15.3.1.3
Data Validity
The data on the SDA line must be stable during the high period of the clock, and the data line can
only change when SCL is Low (see Figure 15-6).
Figure 15-6. Data Validity During Bit Transfer on the I2C Bus
SDA
SCL
Data line Change
stable
of data
allowed
15.3.1.4
Acknowledge
All bus transactions have a required acknowledge clock cycle that is generated by the master. During
the acknowledge cycle, the transmitter (which can be the master or slave) releases the SDA line.
To acknowledge the transaction, the receiver must pull down SDA during the acknowledge clock
cycle. The data transmitted out by the receiver during the acknowledge cycle must comply with the
data validity requirements described in “Data Validity” on page 705.
When a slave receiver does not acknowledge the slave address, SDA must be left High by the slave
so that the master can generate a STOP condition and abort the current transfer. If the master
device is acting as a receiver during a transfer, it is responsible for acknowledging each transfer
made by the slave. Because the master controls the number of bytes in the transfer, it signals the
end of data to the slave transmitter by not generating an acknowledge on the last data byte. The
slave transmitter must then release SDA to allow the master to generate the STOP or a repeated
START condition.
15.3.1.5
Arbitration
A master may start a transfer only if the bus is idle. It's possible for two or more masters to generate
a START condition within minimum hold time of the START condition. In these situations, an
arbitration scheme takes place on the SDA line, while SCL is High. During arbitration, the first of
the competing master devices to place a '1' (High) on SDA while another master transmits a '0'
(Low) switches off its data output stage and retires until the bus is idle again.
Arbitration can take place over several bits. Its first stage is a comparison of address bits, and if
both masters are trying to address the same device, arbitration continues on to the comparison of
data bits.
15.3.2
Available Speed Modes
The I2C bus can run in either Standard mode (100 kbps) or Fast mode (400 kbps). The selected
mode should match the speed of the other I2C devices on the bus.
July 25, 2011
705
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
15.3.2.1
Standard and Fast Modes
Standard and Fast modes are selected using a value in the I2C Master Timer Period (I2CMTPR)
register that results in an SCL frequency of 100 kbps for Standard mode or 400 kbps for Fast mode.
The I2C clock rate is determined by the parameters CLK_PRD, TIMER_PRD, SCL_LP, and SCL_HP
where:
CLK_PRD is the system clock period
SCL_LP is the low phase of SCL (fixed at 6)
SCL_HP is the high phase of SCL (fixed at 4)
TIMER_PRD is the programmed value in the I2CMTPR register (see page 724).
The I2C clock period is calculated as follows:
SCL_PERIOD = 2 × (1 + TIMER_PRD) × (SCL_LP + SCL_HP) × CLK_PRD
For example:
CLK_PRD = 50 ns
TIMER_PRD = 2
SCL_LP=6
SCL_HP=4
yields a SCL frequency of:
1/SCL_PERIOD = 333 Khz
Table 15-3 gives examples of the timer periods that should be used to generate both Standard and
Fast mode SCL frequencies based on various system clock frequencies.
Table 15-3. Examples of I2C Master Timer Period versus Speed Mode
15.3.3
System Clock
Timer Period
Standard Mode
Timer Period
Fast Mode
4 MHz
0x01
100 Kbps
-
-
6 MHz
0x02
100 Kbps
-
-
12.5 MHz
0x06
89 Kbps
0x01
312 Kbps
16.7 MHz
0x08
93 Kbps
0x02
278 Kbps
20 MHz
0x09
100 Kbps
0x02
333 Kbps
25 MHz
0x0C
96.2 Kbps
0x03
312 Kbps
33 MHz
0x10
97.1 Kbps
0x04
330 Kbps
40 MHz
0x13
100 Kbps
0x04
400 Kbps
50 MHz
0x18
100 Kbps
0x06
357 Kbps
80 MHz
0x27
100 Kbps
0x09
400 Kbps
Interrupts
The I2C can generate interrupts when the following conditions are observed:
■ Master transaction completed
■ Master arbitration lost
706
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
■ Master transaction error
■ Slave transaction received
■ Slave transaction requested
■ Stop condition on bus detected
■ Start condition on bus detected
The I2C master and I2C slave modules have separate interrupt signals. While both modules can
generate interrupts for multiple conditions, only a single interrupt signal is sent to the interrupt
controller.
15.3.3.1
I2C Master Interrupts
The I2C master module generates an interrupt when a transaction completes (either transmit or
receive), when arbitration is lost, or when an error occurs during a transaction. To enable the I2C
master interrupt, software must set the IM bit in the I2C Master Interrupt Mask (I2CMIMR) register.
When an interrupt condition is met, software must check the ERROR and ARBLST bits in the I2C
Master Control/Status (I2CMCS) register to verify that an error didn't occur during the last transaction
and to ensure that arbitration has not been lost. An error condition is asserted if the last transaction
wasn't acknowledged by the slave. If an error is not detected and the master has not lost arbitration,
the application can proceed with the transfer. The interrupt is cleared by writing a 1 to the IC bit in
the I2C Master Interrupt Clear (I2CMICR) register.
If the application doesn't require the use of interrupts, the raw interrupt status is always visible via
the I2C Master Raw Interrupt Status (I2CMRIS) register.
15.3.3.2
I2C Slave Interrupts
The slave module can generate an interrupt when data has been received or requested. This interrupt
is enabled by setting the DATAIM bit in the I2C Slave Interrupt Mask (I2CSIMR) register. Software
determines whether the module should write (transmit) or read (receive) data from the I2C Slave
Data (I2CSDR) register, by checking the RREQ and TREQ bits of the I2C Slave Control/Status
(I2CSCSR) register. If the slave module is in receive mode and the first byte of a transfer is received,
the FBR bit is set along with the RREQ bit. The interrupt is cleared by setting the DATAIC bit in the
I2C Slave Interrupt Clear (I2CSICR) register.
In addition, the slave module can generate an interrupt when a start and stop condition is detected.
These interrupts are enabled by setting the STARTIM and STOPIM bits of the I2C Slave Interrupt
Mask (I2CSIMR) register and cleared by writing a 1 to the STOPIC and STARTIC bits of the I2C
Slave Interrupt Clear (I2CSICR) register.
If the application doesn't require the use of interrupts, the raw interrupt status is always visible via
the I2C Slave Raw Interrupt Status (I2CSRIS) register.
15.3.4
Loopback Operation
The I2C modules can be placed into an internal loopback mode for diagnostic or debug work by
setting the LPBK bit in the I2C Master Configuration (I2CMCR) register. In loopback mode, the
SDA and SCL signals from the master and slave modules are tied together.
July 25, 2011
707
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
15.3.5
Command Sequence Flow Charts
This section details the steps required to perform the various I2C transfer types in both master and
slave mode.
15.3.5.1
I2C Master Command Sequences
The figures that follow show the command sequences available for the I2C master.
708
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 15-7. Master Single TRANSMIT
Idle
Write Slave
Address to
I2CMSA
Sequence
may be
omitted in a
Single Master
system
Write data to
I2CMDR
Read I2CMCS
NO
BUSBSY bit=0?
YES
Write ---0-111
to I2CMCS
Read I2CMCS
NO
BUSY bit=0?
YES
Error Service
NO
ERROR bit=0?
YES
Idle
July 25, 2011
709
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Figure 15-8. Master Single RECEIVE
Idle
Write Slave
Address to
I2CMSA
Sequence may be
omitted in a Single
Master system
Read I2CMCS
NO
BUSBSY bit=0?
YES
Write ---00111
to I2CMCS
Read I2CMCS
NO
BUSY bit=0?
YES
Error Service
NO
ERROR bit=0?
YES
Read data from
I2CMDR
Idle
710
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 15-9. Master TRANSMIT with Repeated START
Idle
Write Slave
Address to
I2CMSA
Sequence
may be
omitted in a
Single Master
system
Read I2CMCS
Write data to
I2CMDR
BUSY bit=0?
YES
Read I2CMCS
ERROR bit=0?
NO
NO
NO
BUSBSY bit=0?
YES
Write data to
I2CMDR
YES
Write ---0-011
to I2CMCS
NO
ARBLST bit=1?
YES
Write ---0-001
to I2CMCS
NO
Index=n?
YES
Write ---0-101
to I2CMCS
Write ---0-100
to I2CMCS
Error Service
Idle
Read I2CMCS
NO
BUSY bit=0?
YES
Error Service
NO
ERROR bit=0?
YES
Idle
July 25, 2011
711
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Figure 15-10. Master RECEIVE with Repeated START
Idle
Write Slave
Address to
I2CMSA
Sequence
may be
omitted in a
Single Master
system
Read I2CMCS
BUSY bit=0?
Read I2CMCS
NO
YES
NO
BUSBSY bit=0?
ERROR bit=0?
NO
YES
Write ---01011
to I2CMCS
NO
Read data from
I2CMDR
ARBLST bit=1?
YES
Write ---01001
to I2CMCS
NO
Write ---0-100
to I2CMCS
Index=m-1?
Error Service
YES
Write ---00101
to I2CMCS
Idle
Read I2CMCS
BUSY bit=0?
NO
YES
NO
ERROR bit=0?
YES
Error Service
Read data from
I2CMDR
Idle
712
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 15-11. Master RECEIVE with Repeated START after TRANSMIT with Repeated START
Idle
Master operates in
Master Transmit mode
STOP condition is not
generated
Write Slave
Address to
I2CMSA
Write ---01011
to I2CMCS
Master operates in
Master Receive mode
Repeated START
condition is generated
with changing data
direction
Idle
July 25, 2011
713
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Figure 15-12. Master TRANSMIT with Repeated START after RECEIVE with Repeated START
Idle
Master operates in
Master Receive mode
STOP condition is not
generated
Write Slave
Address to
I2CMSA
Write ---0-011
to I2CMCS
Master operates in
Master Transmit mode
Repeated START
condition is generated
with changing data
direction
Idle
15.3.5.2
I2C Slave Command Sequences
Figure 15-13 on page 715 presents the command sequence available for the I2C slave.
714
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 15-13. Slave Command Sequence
Idle
Write OWN Slave
Address to
I2CSOAR
Write -------1
to I2CSCSR
Read I2CSCSR
NO
TREQ bit=1?
YES
Write data to
I2CSDR
15.4
NO
RREQ bit=1?
FBR is
also valid
YES
Read data from
I2CSDR
Initialization and Configuration
The following example shows how to configure the I2C module to transmit a single byte as a master.
This assumes the system clock is 20 MHz.
1. Enable the I2C clock by writing a value of 0x0000.1000 to the RCGC1 register in the System
Control module (see page 243).
2. Enable the clock to the appropriate GPIO module via the RCGC2 register in the System Control
module (see page 251). To find out which GPIO port to enable, refer to Table 17-5 on page 757.
3. In the GPIO module, enable the appropriate pins for their alternate function using the
GPIOAFSEL register (see page 418). To determine which GPIOs to configure, see Table
17-4 on page 753.
4. Enable the I2C pins for Open Drain operation. See page 423.
5. Configure the PMCn fields in the GPIOPCTL register to assign the I2C signals to the appropriate
pins. See page 435 and Table 17-5 on page 757.
6. Initialize the I2C Master by writing the I2CMCR register with a value of 0x0000.0010.
July 25, 2011
715
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
7. Set the desired SCL clock speed of 100 Kbps by writing the I2CMTPR register with the correct
value. The value written to the I2CMTPR register represents the number of system clock periods
in one SCL clock period. The TPR value is determined by the following equation:
TPR = (System Clock/(2*(SCL_LP + SCL_HP)*SCL_CLK))-1;
TPR = (20MHz/(2*(6+4)*100000))-1;
TPR = 9
Write the I2CMTPR register with the value of 0x0000.0009.
8. Specify the slave address of the master and that the next operation is a Transmit by writing the
I2CMSA register with a value of 0x0000.0076. This sets the slave address to 0x3B.
9. Place data (byte) to be transmitted in the data register by writing the I2CMDR register with the
desired data.
10. Initiate a single byte transmit of the data from Master to Slave by writing the I2CMCS register
with a value of 0x0000.0007 (STOP, START, RUN).
11. Wait until the transmission completes by polling the I2CMCS register’s BUSBSY bit until it has
been cleared.
12. Check the ERROR bit in the I2CMCS register to confirm the transmit was acknowledged.
15.5
Register Map
Table 15-4 on page 716 lists the I2C registers. All addresses given are relative to the I2C base address:
■ I2C 0: 0x4002.0000
■ I2C 1: 0x4002.1000
Note that the I2C module clock must be enabled before the registers can be programmed (see
page 243). There must be a delay of 3 system clocks after the I2C module clock is enabled before
any I2C module registers are accessed.
®
The hw_i2c.h file in the StellarisWare Driver Library uses a base address of 0x800 for the I2C slave
registers. Be aware when using registers with offsets between 0x800 and 0x818 that StellarisWare
uses an offset between 0x000 and 0x018 with the slave base address.
Table 15-4. Inter-Integrated Circuit (I2C) Interface Register Map
Offset
Description
See
page
Name
Type
Reset
0x000
I2CMSA
R/W
0x0000.0000
I2C Master Slave Address
718
0x004
I2CMCS
R/W
0x0000.0000
I2C Master Control/Status
719
0x008
I2CMDR
R/W
0x0000.0000
I2C Master Data
723
0x00C
I2CMTPR
R/W
0x0000.0001
I2C Master Timer Period
724
0x010
I2CMIMR
R/W
0x0000.0000
I2C Master Interrupt Mask
725
0x014
I2CMRIS
RO
0x0000.0000
I2C Master Raw Interrupt Status
726
I2C Master
716
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 15-4. Inter-Integrated Circuit (I2C) Interface Register Map (continued)
Offset
Name
0x018
Description
See
page
Type
Reset
I2CMMIS
RO
0x0000.0000
I2C Master Masked Interrupt Status
727
0x01C
I2CMICR
WO
0x0000.0000
I2C Master Interrupt Clear
728
0x020
I2CMCR
R/W
0x0000.0000
I2C Master Configuration
729
0x800
I2CSOAR
R/W
0x0000.0000
I2C Slave Own Address
730
0x804
I2CSCSR
RO
0x0000.0000
I2C Slave Control/Status
731
0x808
I2CSDR
R/W
0x0000.0000
I2C Slave Data
733
0x80C
I2CSIMR
R/W
0x0000.0000
I2C Slave Interrupt Mask
734
0x810
I2CSRIS
RO
0x0000.0000
I2C Slave Raw Interrupt Status
735
0x814
I2CSMIS
RO
0x0000.0000
I2C Slave Masked Interrupt Status
736
0x818
I2CSICR
WO
0x0000.0000
I2C Slave Interrupt Clear
737
I2C Slave
15.6
Register Descriptions (I2C Master)
The remainder of this section lists and describes the I2C master registers, in numerical order by
address offset.
July 25, 2011
717
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Register 1: I2C Master Slave Address (I2CMSA), offset 0x000
This register consists of eight bits: seven address bits (A6-A0), and a Receive/Send bit, which
determines if the next operation is a Receive (High), or Transmit (Low).
I2C Master Slave Address (I2CMSA)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x000
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
SA
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:1
SA
R/W
0x00
R/S
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
I2C Slave Address
This field specifies bits A6 through A0 of the slave address.
0
R/S
R/W
0
Receive/Send
The R/S bit specifies if the next operation is a Receive (High) or Transmit
(Low).
Value Description
0
Transmit
1
Receive
718
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 2: I2C Master Control/Status (I2CMCS), offset 0x004
This register accesses status bits when read and control bits when written. When read, the status
register indicates the state of the I2C bus controller. When written, the control register configures
the I2C controller operation.
The START bit generates the START or REPEATED START condition. The STOP bit determines if
the cycle stops at the end of the data cycle or continues on to a repeated START condition. To
generate a single transmit cycle, the I2C Master Slave Address (I2CMSA) register is written with
the desired address, the R/S bit is cleared, and this register is written with ACK=X (0 or 1), STOP=1,
START=1, and RUN=1 to perform the operation and stop. When the operation is completed (or
aborted due an error), an interrupt becomes active and the data may be read from the I2CMDR
register. When the I2C module operates in Master receiver mode, the ACK bit is normally set, causing
the I2C bus controller to transmit an acknowledge automatically after each byte. This bit must be
cleared when the I2C bus controller requires no further data to be transmitted from the slave
transmitter.
Read-Only Status Register
I2C Master Control/Status (I2CMCS)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x004
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
BUSBSY
IDLE
ARBLST
ERROR
BUSY
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:7
reserved
RO
0x0000.00
6
BUSBSY
RO
0
DATACK ADRACK
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Bus Busy
Value Description
0
The I2C bus is idle.
1
The I2C bus is busy.
The bit changes based on the START and STOP conditions.
5
IDLE
RO
0
I2C Idle
Value Description
0
The I2C controller is not idle.
1
The I2C controller is idle.
July 25, 2011
719
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Bit/Field
Name
Type
Reset
4
ARBLST
RO
0
Description
Arbitration Lost
Value Description
3
DATACK
RO
0
0
The I2C controller won arbitration.
1
The I2C controller lost arbitration.
Acknowledge Data
Value Description
2
ADRACK
RO
0
0
The transmitted data was acknowledged
1
The transmitted data was not acknowledged.
Acknowledge Address
Value Description
1
ERROR
RO
0
0
The transmitted address was acknowledged
1
The transmitted address was not acknowledged.
Error
Value Description
0
No error was detected on the last operation.
1
An error occurred on the last operation.
The error can be from the slave address not being acknowledged or the
transmit data not being acknowledged.
0
BUSY
RO
0
I2C Busy
Value Description
0
The controller is idle.
1
The controller is busy.
When the BUSY bit is set, the other status bits are not valid.
Write-Only Control Register
I2C Master Control/Status (I2CMCS)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x004
Type WO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
ACK
STOP
START
RUN
RO
0
RO
0
RO
0
RO
0
RO
0
WO
0
WO
0
WO
0
WO
0
reserved
Type
Reset
reserved
Type
Reset
720
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Bit/Field
Name
Type
Reset
Description
31:4
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
3
ACK
WO
0
Data Acknowledge Enable
Value Description
2
STOP
WO
0
0
The received data byte is not acknowledged automatically by
the master.
1
The received data byte is acknowledged automatically by the
master. See field decoding in Table 15-5 on page 721.
Generate STOP
Value Description
1
START
WO
0
0
The controller does not generate the STOP condition.
1
The controller generates the STOP condition. See field decoding
in Table 15-5 on page 721.
Generate START
Value Description
0
RUN
WO
0
The controller does not generate the START condition.
1
The controller generates the START or repeated START
condition. See field decoding in Table 15-5 on page 721.
I2C Master Enable
0
Value Description
0
The master is disabled.
1
The master is enabled to transmit or receive data. See field
decoding in Table 15-5 on page 721.
Table 15-5. Write Field Decoding for I2CMCS[3:0] Field
Current I2CMSA[0]
State
R/S
Idle
I2CMCS[3:0]
ACK
STOP
START
RUN
Description
0
X
a
0
1
1
START condition followed by TRANSMIT (master goes
to the Master Transmit state).
0
X
1
1
1
START condition followed by a TRANSMIT and STOP
condition (master remains in Idle state).
1
0
0
1
1
START condition followed by RECEIVE operation with
negative ACK (master goes to the Master Receive state).
1
0
1
1
1
START condition followed by RECEIVE and STOP
condition (master remains in Idle state).
1
1
0
1
1
START condition followed by RECEIVE (master goes to
the Master Receive state).
1
1
1
1
1
Illegal
All other combinations not listed are non-operations.
NOP
July 25, 2011
721
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Table 15-5. Write Field Decoding for I2CMCS[3:0] Field (continued)
Current I2CMSA[0]
State
R/S
Master
Transmit
I2CMCS[3:0]
Description
ACK
STOP
START
RUN
X
X
0
0
1
TRANSMIT operation (master remains in Master
Transmit state).
X
X
1
0
0
STOP condition (master goes to Idle state).
X
X
1
0
1
TRANSMIT followed by STOP condition (master goes
to Idle state).
0
X
0
1
1
Repeated START condition followed by a TRANSMIT
(master remains in Master Transmit state).
0
X
1
1
1
Repeated START condition followed by TRANSMIT and
STOP condition (master goes to Idle state).
1
0
0
1
1
Repeated START condition followed by a RECEIVE
operation with a negative ACK (master goes to Master
Receive state).
1
0
1
1
1
Repeated START condition followed by a TRANSMIT
and STOP condition (master goes to Idle state).
1
1
0
1
1
Repeated START condition followed by RECEIVE
(master goes to Master Receive state).
1
1
1
1
1
Illegal.
All other combinations not listed are non-operations.
NOP.
X
0
0
0
1
RECEIVE operation with negative ACK (master remains
in Master Receive state).
X
X
1
0
0
STOP condition (master goes to Idle state).
X
0
1
0
1
RECEIVE followed by STOP condition (master goes to
Idle state).
X
1
0
0
1
RECEIVE operation (master remains in Master Receive
state).
X
1
1
0
1
Illegal.
1
0
0
1
1
Repeated START condition followed by RECEIVE
operation with a negative ACK (master remains in Master
Receive state).
1
0
1
1
1
Repeated START condition followed by RECEIVE and
STOP condition (master goes to Idle state).
1
1
0
1
1
Repeated START condition followed by RECEIVE
(master remains in Master Receive state).
0
X
0
1
1
Repeated START condition followed by TRANSMIT
(master goes to Master Transmit state).
0
X
1
1
1
Repeated START condition followed by TRANSMIT and
STOP condition (master goes to Idle state).
Master
Receive
All other combinations not listed are non-operations.
b
NOP.
a. An X in a table cell indicates the bit can be 0 or 1.
b. In Master Receive mode, a STOP condition should be generated only after a Data Negative Acknowledge executed by
the master or an Address Negative Acknowledge executed by the slave.
722
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 3: I2C Master Data (I2CMDR), offset 0x008
Important: This register is read-sensitive. See the register description for details.
This register contains the data to be transmitted when in the Master Transmit state and the data
received when in the Master Receive state.
I2C Master Data (I2CMDR)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x008
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
DATA
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
DATA
R/W
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Data Transferred
Data transferred during transaction.
July 25, 2011
723
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Register 4: I2C Master Timer Period (I2CMTPR), offset 0x00C
This register specifies the period of the SCL clock.
Caution – Take care not to set bit 7 when accessing this register as unpredictable behavior can occur.
I2C Master Timer Period (I2CMTPR)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x00C
Type R/W, reset 0x0000.0001
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
1
reserved
Type
Reset
reserved
Type
Reset
TPR
RO
0
Bit/Field
Name
Type
Reset
31:7
reserved
RO
0x0000.00
6:0
TPR
R/W
0x1
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
SCL Clock Period
This field specifies the period of the SCL clock.
SCL_PRD = 2×(1 + TPR)×(SCL_LP + SCL_HP)×CLK_PRD
where:
SCL_PRD is the SCL line period (I2C clock).
TPR is the Timer Period register value (range of 1 to 127).
SCL_LP is the SCL Low period (fixed at 6).
SCL_HP is the SCL High period (fixed at 4).
CLK_PRD is the system clock period in ns.
724
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 5: I2C Master Interrupt Mask (I2CMIMR), offset 0x010
This register controls whether a raw interrupt is promoted to a controller interrupt.
I2C Master Interrupt Mask (I2CMIMR)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x010
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
IM
Bit/Field
Name
Type
Reset
Description
31:1
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
IM
R/W
0
Interrupt Mask
Value Description
1
The master interrupt is sent to the interrupt controller when the
RIS bit in the I2CMRIS register is set.
0
The RIS interrupt is suppressed and not sent to the interrupt
controller.
July 25, 2011
725
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Register 6: I2C Master Raw Interrupt Status (I2CMRIS), offset 0x014
This register specifies whether an interrupt is pending.
I2C Master Raw Interrupt Status (I2CMRIS)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x014
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
RIS
RO
0
Bit/Field
Name
Type
Reset
Description
31:1
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
RIS
RO
0
Raw Interrupt Status
Value Description
1
A master interrupt is pending.
0
No interrupt.
This bit is cleared by writing a 1 to the IC bit in the I2CMICR register.
726
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 7: I2C Master Masked Interrupt Status (I2CMMIS), offset 0x018
This register specifies whether an interrupt was signaled.
I2C Master Masked Interrupt Status (I2CMMIS)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x018
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
MIS
RO
0
Bit/Field
Name
Type
Reset
Description
31:1
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
MIS
RO
0
Masked Interrupt Status
Value Description
1
An unmasked master interrupt was signaled and is pending.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the IC bit in the I2CMICR register.
July 25, 2011
727
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Register 8: I2C Master Interrupt Clear (I2CMICR), offset 0x01C
This register clears the raw and masked interrupts.
I2C Master Interrupt Clear (I2CMICR)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x01C
Type WO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
WO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
IC
Bit/Field
Name
Type
Reset
Description
31:1
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
IC
WO
0
Interrupt Clear
Writing a 1 to this bit clears the RIS bit in the I2CMRIS register and the
MIS bit in the I2CMMIS register.
A read of this register returns no meaningful data.
728
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 9: I2C Master Configuration (I2CMCR), offset 0x020
This register configures the mode (Master or Slave) and sets the interface for test mode loopback.
I2C Master Configuration (I2CMCR)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x020
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
SFE
MFE
RO
0
RO
0
RO
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
Bit/Field
Name
Type
Reset
31:6
reserved
RO
0x0000.00
5
SFE
R/W
0
reserved
RO
0
RO
0
LPBK
RO
0
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
I2C Slave Function Enable
Value Description
4
MFE
R/W
0
1
Slave mode is enabled.
0
Slave mode is disabled.
I2C Master Function Enable
Value Description
3:1
reserved
RO
0x0
0
LPBK
R/W
0
1
Master mode is enabled.
0
Master mode is disabled.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
I2C Loopback
Value Description
15.7
1
The controller in a test mode loopback configuration.
0
Normal operation.
Register Descriptions (I2C Slave)
The remainder of this section lists and describes the I2C slave registers, in numerical order by
address offset.
July 25, 2011
729
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Register 10: I2C Slave Own Address (I2CSOAR), offset 0x800
This register consists of seven address bits that identify the Stellaris I2C device on the I2C bus.
I2C Slave Own Address (I2CSOAR)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x800
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
OAR
RO
0
Bit/Field
Name
Type
Reset
31:7
reserved
RO
0x0000.00
6:0
OAR
R/W
0x00
R/W
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
I2C Slave Own Address
This field specifies bits A6 through A0 of the slave address.
730
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 11: I2C Slave Control/Status (I2CSCSR), offset 0x804
This register functions as a control register when written, and a status register when read.
Read-Only Status Register
I2C Slave Control/Status (I2CSCSR)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x804
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
9
8
7
6
5
4
3
reserved
Type
Reset
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
31:3
reserved
RO
0x0000.000
2
FBR
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
2
1
0
FBR
TREQ
RREQ
RO
0
RO
0
RO
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
First Byte Received
Value Description
1
The first byte following the slave’s own address has been
received.
0
The first byte has not been received.
This bit is only valid when the RREQ bit is set and is automatically cleared
when data has been read from the I2CSDR register.
Note:
1
TREQ
RO
0
This bit is not used for slave transmit operations.
Transmit Request
Value Description
0
RREQ
RO
0
1
The I2C controller has been addressed as a slave transmitter
and is using clock stretching to delay the master until data has
been written to the I2CSDR register.
0
No outstanding transmit request.
Receive Request
Value Description
1
The I2C controller has outstanding receive data from the I2C
master and is using clock stretching to delay the master until
the data has been read from the I2CSDR register.
0
No outstanding receive data.
July 25, 2011
731
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Write-Only Control Register
I2C Slave Control/Status (I2CSCSR)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x804
Type WO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
8
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
WO
0
reserved
Type
Reset
reserved
Type
Reset
Bit/Field
Name
Type
Reset
31:1
reserved
RO
0x0000.000
0
DA
WO
0
RO
0
DA
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Device Active
Value Description
0
Disables the I2C slave operation.
1
Enables the I2C slave operation.
732
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 12: I2C Slave Data (I2CSDR), offset 0x808
Important: This register is read-sensitive. See the register description for details.
This register contains the data to be transmitted when in the Slave Transmit state, and the data
received when in the Slave Receive state.
I2C Slave Data (I2CSDR)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x808
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
R/W
0
reserved
Type
Reset
reserved
Type
Reset
DATA
RO
0
Bit/Field
Name
Type
Reset
31:8
reserved
RO
0x0000.00
7:0
DATA
R/W
0x00
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Data for Transfer
This field contains the data for transfer during a slave receive or transmit
operation.
July 25, 2011
733
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Register 13: I2C Slave Interrupt Mask (I2CSIMR), offset 0x80C
This register controls whether a raw interrupt is promoted to a controller interrupt.
I2C Slave Interrupt Mask (I2CSIMR)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x80C
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
STOPIM STARTIM DATAIM
R/W
0
R/W
0
R/W
0
Bit/Field
Name
Type
Reset
Description
31:3
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
2
STOPIM
R/W
0
Stop Condition Interrupt Mask
Value Description
1
STARTIM
R/W
0
1
The STOP condition interrupt is sent to the interrupt controller
when the STOPRIS bit in the I2CSRIS register is set.
0
The STOPRIS interrupt is suppressed and not sent to the
interrupt controller.
Start Condition Interrupt Mask
Value Description
0
DATAIM
R/W
0
1
The START condition interrupt is sent to the interrupt controller
when the STARTRIS bit in the I2CSRIS register is set.
0
The STARTRIS interrupt is suppressed and not sent to the
interrupt controller.
Data Interrupt Mask
Value Description
1
The data received or data requested interrupt is sent to the
interrupt controller when the DATARIS bit in the I2CSRIS register
is set.
0
The DATARIS interrupt is suppressed and not sent to the
interrupt controller.
734
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 14: I2C Slave Raw Interrupt Status (I2CSRIS), offset 0x810
This register specifies whether an interrupt is pending.
I2C Slave Raw Interrupt Status (I2CSRIS)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x810
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
STOPRIS STARTRIS DATARIS
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:3
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
2
STOPRIS
RO
0
Stop Condition Raw Interrupt Status
Value Description
1
A STOP condition interrupt is pending.
0
No interrupt.
This bit is cleared by writing a 1 to the STOPIC bit in the I2CSICR
register.
1
STARTRIS
RO
0
Start Condition Raw Interrupt Status
Value Description
1
A START condition interrupt is pending.
0
No interrupt.
This bit is cleared by writing a 1 to the STARTIC bit in the I2CSICR
register.
0
DATARIS
RO
0
Data Raw Interrupt Status
Value Description
1
A data received or data requested interrupt is pending.
0
No interrupt.
This bit is cleared by writing a 1 to the DATAIC bit in the I2CSICR
register.
July 25, 2011
735
Texas Instruments-Production Data
Inter-Integrated Circuit (I2C) Interface
Register 15: I2C Slave Masked Interrupt Status (I2CSMIS), offset 0x814
This register specifies whether an interrupt was signaled.
I2C Slave Masked Interrupt Status (I2CSMIS)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x814
Type RO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
STOPMIS STARTMIS DATAMIS
RO
0
RO
0
RO
0
Bit/Field
Name
Type
Reset
Description
31:3
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
2
STOPMIS
RO
0
Stop Condition Masked Interrupt Status
Value Description
1
An unmasked STOP condition interrupt was signaled is pending.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the STOPIC bit in the I2CSICR
register.
1
STARTMIS
RO
0
Start Condition Masked Interrupt Status
Value Description
1
An unmasked START condition interrupt was signaled is
pending.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the STARTIC bit in the I2CSICR
register.
0
DATAMIS
RO
0
Data Masked Interrupt Status
Value Description
1
An unmasked data received or data requested interrupt was
signaled is pending.
0
An interrupt has not occurred or is masked.
This bit is cleared by writing a 1 to the DATAIC bit in the I2CSICR
register.
736
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Register 16: I2C Slave Interrupt Clear (I2CSICR), offset 0x818
This register clears the raw interrupt. A read of this register returns no meaningful data.
I2C Slave Interrupt Clear (I2CSICR)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
Offset 0x818
Type WO, reset 0x0000.0000
31
30
29
28
27
26
25
24
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
15
14
13
12
11
10
9
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
23
22
21
20
19
18
17
16
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
8
7
6
5
4
3
2
1
0
RO
0
RO
0
RO
0
RO
0
RO
0
RO
0
reserved
Type
Reset
reserved
Type
Reset
RO
0
STOPIC STARTIC
WO
0
WO
0
DATAIC
WO
0
Bit/Field
Name
Type
Reset
Description
31:3
reserved
RO
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
2
STOPIC
WO
0
Stop Condition Interrupt Clear
Writing a 1 to this bit clears the STOPRIS bit in the I2CSRIS register
and the STOPMIS bit in the I2CSMIS register.
A read of this register returns no meaningful data.
1
STARTIC
WO
0
Start Condition Interrupt Clear
Writing a 1 to this bit clears the STOPRIS bit in the I2CSRIS register
and the STOPMIS bit in the I2CSMIS register.
A read of this register returns no meaningful data.
0
DATAIC
WO
0
Data Interrupt Clear
Writing a 1 to this bit clears the STOPRIS bit in the I2CSRIS register
and the STOPMIS bit in the I2CSMIS register.
A read of this register returns no meaningful data.
July 25, 2011
737
Texas Instruments-Production Data
Pin Diagram
16
Pin Diagram
The LM3S1G58 microcontroller pin diagram is shown below.
Each GPIO signal is identified by its GPIO port unless it defaults to an alternate function on reset.
In this case, the GPIO port name is followed by the default alternate function. To see a complete
list of possible functions for each pin, see Table 17-5 on page 757.
Figure 16-1. 100-Pin LQFP Package Pin Diagram
738
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 16-2. 108-Ball BGA Package Pin Diagram (Top View)
July 25, 2011
739
Texas Instruments-Production Data
Signal Tables
17
Signal Tables
The following tables list the signals available for each pin. Signals are configured as GPIOs on reset,
except for those noted below. Use the GPIOAMSEL register (see page 434) to select analog mode.
For a GPIO pin to be used for an alternate digital function, the corresponding bit in the GPIOAFSEL
register (see page 418) must be set. Further pin muxing options are provided through the PMCx bit
field in the GPIOPCTL register (see page 435), which selects one of several available peripheral
functions for that GPIO.
Important: All GPIO pins are configured as GPIOs by default with the exception of the pins shown
in the table below. A Power-On-Reset (POR) or asserting RST puts the pins back to their
default state.
Table 17-1. GPIO Pins With Default Alternate Functions
GPIO Pin
Default State
GPIOAFSEL Bit
GPIOPCTL PMCx Bit Field
PA[1:0]
UART0
0
0x1
PA[5:2]
SSI0
0
0x1
PB[3:2]
I2C0
0
0x1
PC[3:0]
JTAG/SWD
1
0x3
Table 17-2 on page 741 shows the pin-to-signal-name mapping, including functional characteristics
of the signals. Each possible alternate analog and digital function is listed for each pin.
Table 17-3 on page 747 lists the signals in alphabetical order by signal name. If it is possible for a
signal to be on multiple pins, each possible pin assignment is listed. The "Pin Mux" column indicates
the GPIO and the encoding needed in the PMCx bit field in the GPIOPCTL register.
Table 17-4 on page 753 groups the signals by functionality, except for GPIOs. If it is possible for a
signal to be on multiple pins, each possible pin assignment is listed.
Table 17-5 on page 757 lists the GPIO pins and their analog and digital alternate functions. The AINx
and VREFA analog signals are not 5-V tolerant and go through an isolation circuit before reaching
their circuitry. These signals are configured by clearing the corresponding DEN bit in the GPIO Digital
Enable (GPIODEN) register and setting the corresponding AMSEL bit in the GPIO Analog Mode
Select (GPIOAMSEL) register. The digital signals are enabled by setting the appropriate bit in the
GPIO Alternate Function Select (GPIOAFSEL) and GPIODEN registers and configuring the PMCx
bit field in the GPIO Port Control (GPIOPCTL) register to the numeric enoding shown in the table
below. Table entries that are shaded gray are the default values for the corresponding GPIO pin.
Table 17-6 on page 760 lists the signals based on number of possible pin assignments. This table
can be used to plan how to configure the pins for a particular functionality. Application Note AN01274
®
Configuring Stellaris Microcontrollers with Pin Multiplexing provides an overview of the pin muxing
implementation, an explanation of how a system designer defines a pin configuration, and examples
of the pin configuration process.
Note:
All digital inputs are Schmitt triggered.
740
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
17.1
100-Pin LQFP Package Pin Tables
Table 17-2. Signals by Pin Number
Pin Number
a
Pin Name
Pin Type
Buffer Type
PE7
I/O
TTL
AIN0
I
Analog
PE6
I/O
TTL
1
2
Description
GPIO port E bit 7.
Analog-to-digital converter input 0.
GPIO port E bit 6.
AIN1
I
Analog
Analog-to-digital converter input 1.
VDDA
-
Power
The positive supply (3.3 V) for the analog circuits (ADC, Analog
Comparators, etc.). These are separated from VDD to minimize
the electrical noise contained on VDD from affecting the analog
functions. VDDA pins must be connected to 3.3 V, regardless of
system implementation.
GNDA
-
Power
The ground reference for the analog circuits (ADC, etc.). These
are separated from GND to minimize the electrical noise contained
on VDD from affecting the analog functions.
3
4
PE5
I/O
TTL
AIN2
I
Analog
CCP5
I/O
TTL
Capture/Compare/PWM 5.
PE4
I/O
TTL
GPIO port E bit 4.
AIN3
I
Analog
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
U2Tx
O
TTL
UART module 2 transmit. When in IrDA mode, this signal has IrDA
modulation.
LDO
-
Power
Low drop-out regulator output voltage. This pin requires an external
capacitor between the pin and GND of 1 µF or greater. When the
on-chip LDO is used to provide power to the logic, the LDO pin
must also be connected to the VDDC pins at the board level in
addition to the decoupling capacitor(s).
8
VDD
-
Power
Positive supply for I/O and some logic.
9
GND
-
Power
Ground reference for logic and I/O pins.
5
6
7
10
11
GPIO port E bit 5.
Analog-to-digital converter input 2.
Analog-to-digital converter input 3.
PD0
I/O
TTL
AIN15
I
Analog
GPIO port D bit 0.
CCP6
I/O
TTL
Capture/Compare/PWM 6.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
GPIO port D bit 1.
Analog-to-digital converter input 15.
PD1
I/O
TTL
AIN14
I
Analog
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP7
I/O
TTL
Capture/Compare/PWM 7.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
U2Tx
O
TTL
UART module 2 transmit. When in IrDA mode, this signal has IrDA
modulation.
Analog-to-digital converter input 14.
July 25, 2011
741
Texas Instruments-Production Data
Signal Tables
Table 17-2. Signals by Pin Number (continued)
Pin Number
12
13
14
Pin Name
Pin Type
a
Buffer Type
Description
PD2
I/O
TTL
AIN13
I
Analog
GPIO port D bit 2.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
CCP6
I/O
TTL
Capture/Compare/PWM 6.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
PD3
I/O
TTL
GPIO port D bit 3.
AIN12
I
Analog
CCP0
I/O
TTL
Capture/Compare/PWM 0.
CCP7
I/O
TTL
Capture/Compare/PWM 7.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
VDDC
-
Power
Positive supply for most of the logic function, including the
processor core and most peripherals.
Ground reference for logic and I/O pins.
Analog-to-digital converter input 13.
Analog-to-digital converter input 12.
15
GND
-
Power
16
PG3
I/O
TTL
GPIO port G bit 3.
17
PG2
I/O
TTL
GPIO port G bit 2.
PG1
I/O
TTL
GPIO port G bit 1.
I2C1SDA
I/O
OD
I2C module 1 data.
U2Tx
O
TTL
UART module 2 transmit. When in IrDA mode, this signal has IrDA
modulation.
PG0
I/O
TTL
GPIO port G bit 0.
I2C1SCL
I/O
OD
I2C module 1 clock.
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
20
VDD
-
Power
Positive supply for I/O and some logic.
21
GND
-
Power
Ground reference for logic and I/O pins.
18
19
22
23
24
PC7
I/O
TTL
GPIO port C bit 7.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
CCP4
I/O
TTL
Capture/Compare/PWM 4.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
PC6
I/O
TTL
GPIO port C bit 6.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
PC5
I/O
TTL
GPIO port C bit 5.
CCP1
I/O
TTL
Capture/Compare/PWM 1.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
742
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-2. Signals by Pin Number (continued)
Pin Number
25
26
27
a
Pin Name
Pin Type
Buffer Type
Description
PC4
I/O
TTL
GPIO port C bit 4.
CCP1
I/O
TTL
Capture/Compare/PWM 1.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP4
I/O
TTL
Capture/Compare/PWM 4.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
PA0
I/O
TTL
GPIO port A bit 0.
I2C1SCL
I/O
OD
I2C module 1 clock.
U0Rx
I
TTL
UART module 0 receive. When in IrDA mode, this signal has IrDA
modulation.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
PA1
I/O
TTL
GPIO port A bit 1.
I2C1SDA
I/O
OD
I2C module 1 data.
U0Tx
O
TTL
UART module 0 transmit. When in IrDA mode, this signal has IrDA
modulation.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
PA2
I/O
TTL
GPIO port A bit 2.
SSI0Clk
I/O
TTL
SSI module 0 clock.
28
PA3
I/O
TTL
GPIO port A bit 3.
SSI0Fss
I/O
TTL
SSI module 0 frame.
PA4
I/O
TTL
GPIO port A bit 4.
SSI0Rx
I
TTL
SSI module 0 receive.
PA5
I/O
TTL
GPIO port A bit 5.
SSI0Tx
O
TTL
SSI module 0 transmit.
32
VDD
-
Power
Positive supply for I/O and some logic.
33
GND
-
Power
Ground reference for logic and I/O pins.
PA6
I/O
TTL
GPIO port A bit 6.
34
CCP1
I/O
TTL
Capture/Compare/PWM 1.
I2C1SCL
I/O
OD
I2C module 1 clock.
29
30
31
PA7
I/O
TTL
GPIO port A bit 7.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
35
CCP4
I/O
TTL
Capture/Compare/PWM 4.
I2C1SDA
I/O
OD
I2C module 1 data.
PG7
I/O
TTL
GPIO port G bit 7.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
PG6
I/O
TTL
GPIO port G bit 6.
VDDC
-
Power
Positive supply for most of the logic function, including the
processor core and most peripherals.
GND
-
Power
Ground reference for logic and I/O pins.
PG5
I/O
TTL
GPIO port G bit 5.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
36
37
38
39
40
July 25, 2011
743
Texas Instruments-Production Data
Signal Tables
Table 17-2. Signals by Pin Number (continued)
Pin Number
a
Pin Name
Pin Type
Buffer Type
Description
PG4
I/O
TTL
GPIO port G bit 4.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
PF7
I/O
TTL
GPIO port F bit 7.
CCP4
I/O
TTL
Capture/Compare/PWM 4.
PF6
I/O
TTL
GPIO port F bit 6.
Capture/Compare/PWM 1.
41
42
43
CCP1
I/O
TTL
44
VDD
-
Power
Positive supply for I/O and some logic.
45
GND
-
Power
Ground reference for logic and I/O pins.
PF5
I/O
TTL
GPIO port F bit 5.
46
CCP2
I/O
TTL
Capture/Compare/PWM 2.
SSI1Tx
O
TTL
SSI module 1 transmit.
PF0
I/O
TTL
GPIO port F bit 0.
U1DSR
I
TTL
UART module 1 Data Set Ready modem output control line.
OSC0
I
Analog
Main oscillator crystal input or an external clock reference input.
OSC1
O
Analog
Main oscillator crystal output. Leave unconnected when using a
single-ended clock source.
WAKE
I
TTL
An external input that brings the processor out of Hibernate mode
when asserted.
HIB
O
OD
An output that indicates the processor is in Hibernate mode.
XOSC0
I
Analog
Hibernation module oscillator crystal input or an external clock
reference input. Note that this is either a 4.194304-MHz crystal or
a 32.768-kHz oscillator for the Hibernation module RTC. See the
CLKSEL bit in the HIBCTL register.
XOSC1
O
Analog
Hibernation module oscillator crystal output. Leave unconnected
when using a single-ended clock source.
GND
-
Power
Ground reference for logic and I/O pins.
VBAT
-
Power
Power source for the Hibernation module. It is normally connected
to the positive terminal of a battery and serves as the battery
backup/Hibernation module power-source supply.
56
VDD
-
Power
Positive supply for I/O and some logic.
57
GND
-
Power
Ground reference for logic and I/O pins.
PF4
I/O
TTL
GPIO port F bit 4.
58
CCP0
I/O
TTL
Capture/Compare/PWM 0.
SSI1Rx
I
TTL
SSI module 1 receive.
PF3
I/O
TTL
GPIO port F bit 3.
SSI1Fss
I/O
TTL
SSI module 1 frame.
47
48
49
50
51
52
53
54
55
59
PF2
I/O
TTL
GPIO port F bit 2.
SSI1Clk
I/O
TTL
SSI module 1 clock.
60
PF1
I/O
TTL
GPIO port F bit 1.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
VDDC
-
Power
Positive supply for most of the logic function, including the
processor core and most peripherals.
63
GND
-
Power
Ground reference for logic and I/O pins.
64
RST
I
TTL
61
62
System reset input.
744
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-2. Signals by Pin Number (continued)
Pin Number
65
a
Pin Name
Pin Type
Buffer Type
Description
CMOD0
I
TTL
CPU Mode bit 0. Input must be set to logic 0 (grounded); other
encodings reserved.
PB0
I/O
TTL
GPIO port B bit 0. This pin is not 5-V tolerant.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
PB1
I/O
TTL
GPIO port B bit 1. This pin is not 5-V tolerant.
CCP1
I/O
TTL
Capture/Compare/PWM 1.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
68
VDD
-
Power
Positive supply for I/O and some logic.
69
GND
-
Power
Ground reference for logic and I/O pins.
PB2
I/O
TTL
GPIO port B bit 2.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
I2C0SCL
I/O
OD
I2C module 0 clock.
66
67
70
PB3
I/O
TTL
GPIO port B bit 3.
I2C0SDA
I/O
OD
I2C module 0 data.
PE0
I/O
TTL
GPIO port E bit 0.
71
72
CCP3
I/O
TTL
Capture/Compare/PWM 3.
SSI1Clk
I/O
TTL
SSI module 1 clock.
PE1
I/O
TTL
GPIO port E bit 1.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP6
I/O
TTL
Capture/Compare/PWM 6.
SSI1Fss
I/O
TTL
SSI module 1 frame.
PE2
I/O
TTL
GPIO port E bit 2.
AIN9
I
Analog
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP4
I/O
TTL
Capture/Compare/PWM 4.
SSI1Rx
I
TTL
SSI module 1 receive.
PE3
I/O
TTL
GPIO port E bit 3.
AIN8
I
Analog
CCP1
I/O
TTL
Capture/Compare/PWM 1.
CCP7
I/O
TTL
Capture/Compare/PWM 7.
SSI1Tx
O
TTL
SSI module 1 transmit.
CMOD1
I
TTL
CPU Mode bit 1. Input must be set to logic 0 (grounded); other
encodings reserved.
PC3
I/O
TTL
GPIO port C bit 3.
SWO
O
TTL
JTAG TDO and SWO.
TDO
O
TTL
JTAG TDO and SWO.
73
74
75
76
77
Analog-to-digital converter input 9.
Analog-to-digital converter input 8.
July 25, 2011
745
Texas Instruments-Production Data
Signal Tables
Table 17-2. Signals by Pin Number (continued)
Pin Number
Pin Type
Buffer Type
PC2
I/O
TTL
GPIO port C bit 2.
TDI
I
TTL
JTAG TDI.
PC1
I/O
TTL
GPIO port C bit 1.
SWDIO
I/O
TTL
JTAG TMS and SWDIO.
TMS
I
TTL
JTAG TMS and SWDIO.
78
79
a
Pin Name
Description
PC0
I/O
TTL
GPIO port C bit 0.
SWCLK
I
TTL
JTAG/SWD CLK.
TCK
I
TTL
JTAG/SWD CLK.
81
VDD
-
Power
Positive supply for I/O and some logic.
82
GND
-
Power
Ground reference for logic and I/O pins.
83
PH3
I/O
TTL
GPIO port H bit 3.
84
PH2
I/O
TTL
GPIO port H bit 2.
PH1
I/O
TTL
GPIO port H bit 1.
CCP7
I/O
TTL
Capture/Compare/PWM 7.
PH0
I/O
TTL
GPIO port H bit 0.
CCP6
I/O
TTL
Capture/Compare/PWM 6.
GND
-
Power
Ground reference for logic and I/O pins.
VDDC
-
Power
Positive supply for most of the logic function, including the
processor core and most peripherals.
PB7
I/O
TTL
GPIO port B bit 7.
NMI
I
TTL
Non-maskable interrupt.
PB6
I/O
TTL
GPIO port B bit 6.
CCP1
I/O
TTL
Capture/Compare/PWM 1.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
CCP7
I/O
TTL
Capture/Compare/PWM 7.
VREFA
I
Analog
PB5
I/O
TTL
AIN11
I
Analog
CCP0
I/O
TTL
Capture/Compare/PWM 0.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
CCP6
I/O
TTL
Capture/Compare/PWM 6.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
PB4
I/O
TTL
GPIO port B bit 4.
AIN10
I
Analog
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
80
85
86
87
88
89
90
91
92
This input provides a reference voltage used to specify the input
voltage at which the ADC converts to a maximum value. In other
words, the voltage that is applied to VREFA is the voltage with which
an AINn signal is converted to 4095. The VREFA input is limited
to the range specified in Table 19-22 on page 797.
GPIO port B bit 5.
Analog-to-digital converter input 11.
Analog-to-digital converter input 10.
746
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-2. Signals by Pin Number (continued)
a
Pin Number
Pin Name
Pin Type
Buffer Type
93
VDD
-
Power
Positive supply for I/O and some logic.
94
GND
-
Power
Ground reference for logic and I/O pins.
PD4
I/O
TTL
AIN7
I
Analog
CCP0
I/O
TTL
Capture/Compare/PWM 0.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
PD5
I/O
TTL
GPIO port D bit 5.
AIN6
I
Analog
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP4
I/O
TTL
Capture/Compare/PWM 4.
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
GNDA
-
Power
The ground reference for the analog circuits (ADC, etc.). These
are separated from GND to minimize the electrical noise contained
on VDD from affecting the analog functions.
VDDA
-
Power
The positive supply (3.3 V) for the analog circuits (ADC, Analog
Comparators, etc.). These are separated from VDD to minimize
the electrical noise contained on VDD from affecting the analog
functions. VDDA pins must be connected to 3.3 V, regardless of
system implementation.
PD6
I/O
TTL
AIN5
I
Analog
U2Tx
O
TTL
UART module 2 transmit. When in IrDA mode, this signal has IrDA
modulation.
PD7
I/O
TTL
GPIO port D bit 7.
AIN4
I
Analog
CCP1
I/O
TTL
95
96
97
98
99
100
Description
GPIO port D bit 4.
Analog-to-digital converter input 7.
Analog-to-digital converter input 6.
GPIO port D bit 6.
Analog-to-digital converter input 5.
Analog-to-digital converter input 4.
Capture/Compare/PWM 1.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 17-3. Signals by Signal Name
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
AIN0
1
PE7
I
Analog
Analog-to-digital converter input 0.
AIN1
2
PE6
I
Analog
Analog-to-digital converter input 1.
AIN2
5
PE5
I
Analog
Analog-to-digital converter input 2.
AIN3
6
PE4
I
Analog
Analog-to-digital converter input 3.
AIN4
100
PD7
I
Analog
Analog-to-digital converter input 4.
AIN5
99
PD6
I
Analog
Analog-to-digital converter input 5.
AIN6
96
PD5
I
Analog
Analog-to-digital converter input 6.
AIN7
95
PD4
I
Analog
Analog-to-digital converter input 7.
AIN8
75
PE3
I
Analog
Analog-to-digital converter input 8.
AIN9
74
PE2
I
Analog
Analog-to-digital converter input 9.
AIN10
92
PB4
I
Analog
Analog-to-digital converter input 10.
AIN11
91
PB5
I
Analog
Analog-to-digital converter input 11.
July 25, 2011
747
Texas Instruments-Production Data
Signal Tables
Table 17-3. Signals by Signal Name (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
AIN12
13
PD3
I
Analog
Analog-to-digital converter input 12.
AIN13
12
PD2
I
Analog
Analog-to-digital converter input 13.
AIN14
11
PD1
I
Analog
Analog-to-digital converter input 14.
AIN15
10
PD0
I
Analog
Analog-to-digital converter input 15.
CCP0
13
22
23
58
66
70
91
95
PD3 (4)
PC7 (4)
PC6 (6)
PF4 (1)
PB0 (1)
PB2 (5)
PB5 (4)
PD4 (1)
I/O
TTL
Capture/Compare/PWM 0.
CCP1
24
25
34
43
67
75
90
100
PC5 (1)
PC4 (9)
PA6 (2)
PF6 (1)
PB1 (4)
PE3 (1)
PB6 (1)
PD7 (3)
I/O
TTL
Capture/Compare/PWM 1.
CCP2
6
11
25
46
67
73
74
91
96
PE4 (6)
PD1 (10)
PC4 (5)
PF5 (1)
PB1 (1)
PE1 (4)
PE2 (5)
PB5 (6)
PD5 (1)
I/O
TTL
Capture/Compare/PWM 2.
CCP3
6
23
24
35
41
61
70
72
95
PE4 (1)
PC6 (1)
PC5 (5)
PA7 (7)
PG4 (1)
PF1 (10)
PB2 (4)
PE0 (3)
PD4 (2)
I/O
TTL
Capture/Compare/PWM 3.
CCP4
22
25
35
42
74
96
PC7 (1)
PC4 (6)
PA7 (2)
PF7 (1)
PE2 (1)
PD5 (2)
I/O
TTL
Capture/Compare/PWM 4.
CCP5
5
12
25
36
40
90
91
PE5 (1)
PD2 (4)
PC4 (1)
PG7 (8)
PG5 (1)
PB6 (6)
PB5 (2)
I/O
TTL
Capture/Compare/PWM 5.
748
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-3. Signals by Signal Name (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
CCP6
10
12
73
86
91
PD0 (6)
PD2 (2)
PE1 (5)
PH0 (1)
PB5 (3)
I/O
TTL
Capture/Compare/PWM 6.
CCP7
11
13
75
85
90
PD1 (6)
PD3 (2)
PE3 (5)
PH1 (1)
PB6 (2)
I/O
TTL
Capture/Compare/PWM 7.
CMOD0
65
fixed
I
TTL
CPU Mode bit 0. Input must be set to logic 0
(grounded); other encodings reserved.
CMOD1
76
fixed
I
TTL
CPU Mode bit 1. Input must be set to logic 0
(grounded); other encodings reserved.
GND
9
15
21
33
39
45
54
57
63
69
82
87
94
fixed
-
Power
Ground reference for logic and I/O pins.
GNDA
4
97
fixed
-
Power
The ground reference for the analog circuits (ADC,
etc.). These are separated from GND to minimize
the electrical noise contained on VDD from affecting
the analog functions.
HIB
51
fixed
O
OD
An output that indicates the processor is in
Hibernate mode.
I2C0SCL
70
PB2 (1)
I/O
OD
I2C module 0 clock.
I2C0SDA
71
PB3 (1)
I/O
OD
I2C module 0 data.
I2C1SCL
19
26
34
PG0 (3)
PA0 (8)
PA6 (1)
I/O
OD
I2C module 1 clock.
I2C1SDA
18
27
35
PG1 (3)
PA1 (8)
PA7 (1)
I/O
OD
I2C module 1 data.
LDO
7
fixed
-
Power
Low drop-out regulator output voltage. This pin
requires an external capacitor between the pin and
GND of 1 µF or greater. When the on-chip LDO is
used to provide power to the logic, the LDO pin must
also be connected to the VDDC pins at the board
level in addition to the decoupling capacitor(s).
NMI
89
PB7 (4)
I
TTL
OSC0
48
fixed
I
Analog
Non-maskable interrupt.
Main oscillator crystal input or an external clock
reference input.
OSC1
49
fixed
O
Analog
Main oscillator crystal output. Leave unconnected
when using a single-ended clock source.
July 25, 2011
749
Texas Instruments-Production Data
Signal Tables
Table 17-3. Signals by Signal Name (continued)
Pin Name
PA0
Pin Number Pin Mux / Pin
Assignment
26
-
a
Pin Type
Buffer Type
I/O
TTL
Description
GPIO port A bit 0.
PA1
27
-
I/O
TTL
GPIO port A bit 1.
PA2
28
-
I/O
TTL
GPIO port A bit 2.
PA3
29
-
I/O
TTL
GPIO port A bit 3.
PA4
30
-
I/O
TTL
GPIO port A bit 4.
PA5
31
-
I/O
TTL
GPIO port A bit 5.
PA6
34
-
I/O
TTL
GPIO port A bit 6.
PA7
35
-
I/O
TTL
GPIO port A bit 7.
PB0
66
-
I/O
TTL
GPIO port B bit 0. This pin is not 5-V tolerant.
PB1
67
-
I/O
TTL
GPIO port B bit 1. This pin is not 5-V tolerant.
PB2
70
-
I/O
TTL
GPIO port B bit 2.
PB3
71
-
I/O
TTL
GPIO port B bit 3.
PB4
92
-
I/O
TTL
GPIO port B bit 4.
PB5
91
-
I/O
TTL
GPIO port B bit 5.
PB6
90
-
I/O
TTL
GPIO port B bit 6.
PB7
89
-
I/O
TTL
GPIO port B bit 7.
PC0
80
-
I/O
TTL
GPIO port C bit 0.
PC1
79
-
I/O
TTL
GPIO port C bit 1.
PC2
78
-
I/O
TTL
GPIO port C bit 2.
PC3
77
-
I/O
TTL
GPIO port C bit 3.
PC4
25
-
I/O
TTL
GPIO port C bit 4.
PC5
24
-
I/O
TTL
GPIO port C bit 5.
PC6
23
-
I/O
TTL
GPIO port C bit 6.
PC7
22
-
I/O
TTL
GPIO port C bit 7.
PD0
10
-
I/O
TTL
GPIO port D bit 0.
PD1
11
-
I/O
TTL
GPIO port D bit 1.
PD2
12
-
I/O
TTL
GPIO port D bit 2.
PD3
13
-
I/O
TTL
GPIO port D bit 3.
PD4
95
-
I/O
TTL
GPIO port D bit 4.
PD5
96
-
I/O
TTL
GPIO port D bit 5.
PD6
99
-
I/O
TTL
GPIO port D bit 6.
PD7
100
-
I/O
TTL
GPIO port D bit 7.
PE0
72
-
I/O
TTL
GPIO port E bit 0.
PE1
73
-
I/O
TTL
GPIO port E bit 1.
PE2
74
-
I/O
TTL
GPIO port E bit 2.
PE3
75
-
I/O
TTL
GPIO port E bit 3.
PE4
6
-
I/O
TTL
GPIO port E bit 4.
PE5
5
-
I/O
TTL
GPIO port E bit 5.
PE6
2
-
I/O
TTL
GPIO port E bit 6.
PE7
1
-
I/O
TTL
GPIO port E bit 7.
PF0
47
-
I/O
TTL
GPIO port F bit 0.
750
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-3. Signals by Signal Name (continued)
Pin Name
PF1
Pin Number Pin Mux / Pin
Assignment
61
-
a
Pin Type
Buffer Type
I/O
TTL
Description
GPIO port F bit 1.
PF2
60
-
I/O
TTL
GPIO port F bit 2.
PF3
59
-
I/O
TTL
GPIO port F bit 3.
PF4
58
-
I/O
TTL
GPIO port F bit 4.
PF5
46
-
I/O
TTL
GPIO port F bit 5.
PF6
43
-
I/O
TTL
GPIO port F bit 6.
PF7
42
-
I/O
TTL
GPIO port F bit 7.
PG0
19
-
I/O
TTL
GPIO port G bit 0.
PG1
18
-
I/O
TTL
GPIO port G bit 1.
PG2
17
-
I/O
TTL
GPIO port G bit 2.
PG3
16
-
I/O
TTL
GPIO port G bit 3.
PG4
41
-
I/O
TTL
GPIO port G bit 4.
PG5
40
-
I/O
TTL
GPIO port G bit 5.
PG6
37
-
I/O
TTL
GPIO port G bit 6.
PG7
36
-
I/O
TTL
GPIO port G bit 7.
PH0
86
-
I/O
TTL
GPIO port H bit 0.
PH1
85
-
I/O
TTL
GPIO port H bit 1.
PH2
84
-
I/O
TTL
GPIO port H bit 2.
PH3
83
-
I/O
TTL
GPIO port H bit 3.
RST
64
fixed
I
TTL
System reset input.
SSI0Clk
28
PA2 (1)
I/O
TTL
SSI module 0 clock.
SSI0Fss
29
PA3 (1)
I/O
TTL
SSI module 0 frame.
SSI0Rx
30
PA4 (1)
I
TTL
SSI module 0 receive.
SSI0Tx
31
PA5 (1)
O
TTL
SSI module 0 transmit.
SSI1Clk
60
72
PF2 (9)
PE0 (2)
I/O
TTL
SSI module 1 clock.
SSI1Fss
59
73
PF3 (9)
PE1 (2)
I/O
TTL
SSI module 1 frame.
SSI1Rx
58
74
PF4 (9)
PE2 (2)
I
TTL
SSI module 1 receive.
SSI1Tx
46
75
PF5 (9)
PE3 (2)
O
TTL
SSI module 1 transmit.
SWCLK
80
PC0 (3)
I
TTL
JTAG/SWD CLK.
SWDIO
79
PC1 (3)
I/O
TTL
JTAG TMS and SWDIO.
SWO
77
PC3 (3)
O
TTL
JTAG TDO and SWO.
TCK
80
PC0 (3)
I
TTL
JTAG/SWD CLK.
TDI
78
PC2 (3)
I
TTL
JTAG TDI.
TDO
77
PC3 (3)
O
TTL
JTAG TDO and SWO.
TMS
79
PC1 (3)
I
TTL
JTAG TMS and SWDIO.
U0Rx
26
PA0 (1)
I
TTL
UART module 0 receive. When in IrDA mode, this
signal has IrDA modulation.
July 25, 2011
751
Texas Instruments-Production Data
Signal Tables
Table 17-3. Signals by Signal Name (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
U0Tx
27
PA1 (1)
O
TTL
UART module 0 transmit. When in IrDA mode, this
signal has IrDA modulation.
U1DSR
47
PF0 (9)
I
TTL
UART module 1 Data Set Ready modem output
control line.
U1Rx
10
12
23
26
66
92
PD0 (5)
PD2 (1)
PC6 (5)
PA0 (9)
PB0 (5)
PB4 (7)
I
TTL
UART module 1 receive. When in IrDA mode, this
signal has IrDA modulation.
U1Tx
11
13
22
27
67
91
PD1 (5)
PD3 (1)
PC7 (5)
PA1 (9)
PB1 (5)
PB5 (7)
O
TTL
UART module 1 transmit. When in IrDA mode, this
signal has IrDA modulation.
U2Rx
10
19
92
96
PD0 (4)
PG0 (1)
PB4 (4)
PD5 (9)
I
TTL
UART module 2 receive. When in IrDA mode, this
signal has IrDA modulation.
U2Tx
6
11
18
99
PE4 (5)
PD1 (4)
PG1 (1)
PD6 (9)
O
TTL
UART module 2 transmit. When in IrDA mode, this
signal has IrDA modulation.
VBAT
55
fixed
-
Power
Power source for the Hibernation module. It is
normally connected to the positive terminal of a
battery and serves as the battery
backup/Hibernation module power-source supply.
VDD
8
20
32
44
56
68
81
93
fixed
-
Power
Positive supply for I/O and some logic.
VDDA
3
98
fixed
-
Power
The positive supply (3.3 V) for the analog circuits
(ADC, Analog Comparators, etc.). These are
separated from VDD to minimize the electrical noise
contained on VDD from affecting the analog
functions. VDDA pins must be connected to 3.3 V,
regardless of system implementation.
VDDC
14
38
62
88
fixed
-
Power
Positive supply for most of the logic function,
including the processor core and most peripherals.
VREFA
90
PB6
I
Analog
This input provides a reference voltage used to
specify the input voltage at which the ADC converts
to a maximum value. In other words, the voltage
that is applied to VREFA is the voltage with which
an AINn signal is converted to 4095. The VREFA
input is limited to the range specified in Table
19-22 on page 797.
752
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-3. Signals by Signal Name (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
WAKE
50
fixed
I
TTL
An external input that brings the processor out of
Hibernate mode when asserted.
XOSC0
52
fixed
I
Analog
Hibernation module oscillator crystal input or an
external clock reference input. Note that this is
either a 4.194304-MHz crystal or a 32.768-kHz
oscillator for the Hibernation module RTC. See the
CLKSEL bit in the HIBCTL register.
XOSC1
53
fixed
O
Analog
Hibernation module oscillator crystal output. Leave
unconnected when using a single-ended clock
source.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 17-4. Signals by Function, Except for GPIO
Function
ADC
Pin Name
a
Pin Number
Pin Type
Buffer Type
AIN0
1
I
Analog
Analog-to-digital converter input 0.
Description
AIN1
2
I
Analog
Analog-to-digital converter input 1.
AIN2
5
I
Analog
Analog-to-digital converter input 2.
AIN3
6
I
Analog
Analog-to-digital converter input 3.
AIN4
100
I
Analog
Analog-to-digital converter input 4.
AIN5
99
I
Analog
Analog-to-digital converter input 5.
AIN6
96
I
Analog
Analog-to-digital converter input 6.
AIN7
95
I
Analog
Analog-to-digital converter input 7.
AIN8
75
I
Analog
Analog-to-digital converter input 8.
AIN9
74
I
Analog
Analog-to-digital converter input 9.
AIN10
92
I
Analog
Analog-to-digital converter input 10.
AIN11
91
I
Analog
Analog-to-digital converter input 11.
AIN12
13
I
Analog
Analog-to-digital converter input 12.
AIN13
12
I
Analog
Analog-to-digital converter input 13.
AIN14
11
I
Analog
Analog-to-digital converter input 14.
AIN15
10
I
Analog
Analog-to-digital converter input 15.
VREFA
90
I
Analog
This input provides a reference voltage used to
specify the input voltage at which the ADC converts
to a maximum value. In other words, the voltage
that is applied to VREFA is the voltage with which
an AINn signal is converted to 4095. The VREFA
input is limited to the range specified in Table
19-22 on page 797.
July 25, 2011
753
Texas Instruments-Production Data
Signal Tables
Table 17-4. Signals by Function, Except for GPIO (continued)
Function
Pin Name
a
Pin Number
Pin Type
Buffer Type
CCP0
13
22
23
58
66
70
91
95
I/O
TTL
Capture/Compare/PWM 0.
CCP1
24
25
34
43
67
75
90
100
I/O
TTL
Capture/Compare/PWM 1.
CCP2
6
11
25
46
67
73
74
91
96
I/O
TTL
Capture/Compare/PWM 2.
CCP3
6
23
24
35
41
61
70
72
95
I/O
TTL
Capture/Compare/PWM 3.
CCP4
22
25
35
42
74
96
I/O
TTL
Capture/Compare/PWM 4.
CCP5
5
12
25
36
40
90
91
I/O
TTL
Capture/Compare/PWM 5.
CCP6
10
12
73
86
91
I/O
TTL
Capture/Compare/PWM 6.
I/O
TTL
Capture/Compare/PWM 7.
General-Purpose
Timers
CCP7
Description
754
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-4. Signals by Function, Except for GPIO (continued)
Function
Pin Name
Pin Number
a
Pin Type
Buffer Type
Description
11
13
75
85
90
HIB
51
O
OD
VBAT
55
-
Power
Power source for the Hibernation module. It is
normally connected to the positive terminal of a
battery and serves as the battery
backup/Hibernation module power-source supply.
WAKE
50
I
TTL
An external input that brings the processor out of
Hibernate mode when asserted.
XOSC0
52
I
Analog
Hibernation module oscillator crystal input or an
external clock reference input. Note that this is
either a 4.194304-MHz crystal or a 32.768-kHz
oscillator for the Hibernation module RTC. See the
CLKSEL bit in the HIBCTL register.
XOSC1
53
O
Analog
Hibernation module oscillator crystal output. Leave
unconnected when using a single-ended clock
source.
I2C0SCL
70
I/O
OD
I2C module 0 clock.
I2C0SDA
71
I/O
OD
I2C module 0 data.
I2C1SCL
19
26
34
I/O
OD
I2C module 1 clock.
I2C1SDA
18
27
35
I/O
OD
I2C module 1 data.
SWCLK
80
I
TTL
JTAG/SWD CLK.
SWDIO
79
I/O
TTL
JTAG TMS and SWDIO.
SWO
77
O
TTL
JTAG TDO and SWO.
TCK
80
I
TTL
JTAG/SWD CLK.
TDI
78
I
TTL
JTAG TDI.
TDO
77
O
TTL
JTAG TDO and SWO.
TMS
79
I
TTL
JTAG TMS and SWDIO.
Hibernate
I2C
JTAG/SWD/SWO
An output that indicates the processor is in
Hibernate mode.
July 25, 2011
755
Texas Instruments-Production Data
Signal Tables
Table 17-4. Signals by Function, Except for GPIO (continued)
Function
Pin Name
a
Pin Number
Pin Type
Buffer Type
GND
9
15
21
33
39
45
54
57
63
69
82
87
94
-
Power
Ground reference for logic and I/O pins.
GNDA
4
97
-
Power
The ground reference for the analog circuits (ADC,
etc.). These are separated from GND to minimize
the electrical noise contained on VDD from affecting
the analog functions.
LDO
7
-
Power
Low drop-out regulator output voltage. This pin
requires an external capacitor between the pin and
GND of 1 µF or greater. When the on-chip LDO is
used to provide power to the logic, the LDO pin must
also be connected to the VDDC pins at the board
level in addition to the decoupling capacitor(s).
VDD
8
20
32
44
56
68
81
93
-
Power
Positive supply for I/O and some logic.
VDDA
3
98
-
Power
The positive supply (3.3 V) for the analog circuits
(ADC, Analog Comparators, etc.). These are
separated from VDD to minimize the electrical noise
contained on VDD from affecting the analog
functions. VDDA pins must be connected to 3.3 V,
regardless of system implementation.
VDDC
14
38
62
88
-
Power
Positive supply for most of the logic function,
including the processor core and most peripherals.
SSI0Clk
28
I/O
TTL
SSI module 0 clock.
SSI0Fss
29
I/O
TTL
SSI module 0 frame.
SSI0Rx
30
I
TTL
SSI module 0 receive.
SSI0Tx
31
O
TTL
SSI module 0 transmit.
SSI1Clk
60
72
I/O
TTL
SSI module 1 clock.
SSI1Fss
59
73
I/O
TTL
SSI module 1 frame.
SSI1Rx
58
74
I
TTL
SSI module 1 receive.
SSI1Tx
46
75
O
TTL
SSI module 1 transmit.
Power
SSI
Description
756
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-4. Signals by Function, Except for GPIO (continued)
Function
Pin Name
System Control &
Clocks
UART
a
Pin Number
Pin Type
Buffer Type
Description
CMOD0
65
I
TTL
CPU Mode bit 0. Input must be set to logic 0
(grounded); other encodings reserved.
CMOD1
76
I
TTL
CPU Mode bit 1. Input must be set to logic 0
(grounded); other encodings reserved.
NMI
89
I
TTL
Non-maskable interrupt.
OSC0
48
I
Analog
Main oscillator crystal input or an external clock
reference input.
OSC1
49
O
Analog
Main oscillator crystal output. Leave unconnected
when using a single-ended clock source.
RST
64
I
TTL
System reset input.
U0Rx
26
I
TTL
UART module 0 receive. When in IrDA mode, this
signal has IrDA modulation.
U0Tx
27
O
TTL
UART module 0 transmit. When in IrDA mode, this
signal has IrDA modulation.
U1DSR
47
I
TTL
UART module 1 Data Set Ready modem output
control line.
U1Rx
10
12
23
26
66
92
I
TTL
UART module 1 receive. When in IrDA mode, this
signal has IrDA modulation.
U1Tx
11
13
22
27
67
91
O
TTL
UART module 1 transmit. When in IrDA mode, this
signal has IrDA modulation.
U2Rx
10
19
92
96
I
TTL
UART module 2 receive. When in IrDA mode, this
signal has IrDA modulation.
U2Tx
6
11
18
99
O
TTL
UART module 2 transmit. When in IrDA mode, this
signal has IrDA modulation.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 17-5. GPIO Pins and Alternate Functions
a
Digital Function (GPIOPCTL PMCx Bit Field Encoding)
IO
Pin
Analog
Function
1
2
3
4
5
6
7
8
9
10
11
PA0
26
-
U0Rx
-
-
-
-
-
-
I2C1SCL
U1Rx
-
-
PA1
27
-
U0Tx
-
-
-
-
-
-
I2C1SDA
U1Tx
-
-
PA2
28
-
SSI0Clk
-
-
-
-
-
-
-
-
-
-
PA3
29
-
SSI0Fss
-
-
-
-
-
-
-
-
-
-
PA4
30
-
SSI0Rx
-
-
-
-
-
-
-
-
-
-
PA5
31
-
SSI0Tx
-
-
-
-
-
-
-
-
-
-
PA6
34
-
I2C1SCL
CCP1
-
-
-
-
-
-
-
-
-
PA7
35
-
I2C1SDA
CCP4
-
-
-
-
CCP3
-
-
-
-
July 25, 2011
757
Texas Instruments-Production Data
Signal Tables
Table 17-5. GPIO Pins and Alternate Functions (continued)
a
Digital Function (GPIOPCTL PMCx Bit Field Encoding)
IO
Pin
Analog
Function
1
2
3
4
5
6
7
8
9
10
11
PB0
66
-
CCP0
-
-
-
U1Rx
-
-
-
-
-
-
PB1
67
-
CCP2
-
-
CCP1
U1Tx
-
-
-
-
-
-
PB2
70
-
I2C0SCL
-
-
CCP3
CCP0
-
-
-
-
-
-
PB3
71
-
I2C0SDA
-
-
-
-
-
-
-
-
-
-
PB4
92
AIN10
-
-
-
U2Rx
-
-
U1Rx
-
-
-
-
PB5
91
AIN11
-
CCP5
CCP6
CCP0
-
CCP2
U1Tx
-
-
-
-
PB6
90
VREFA
CCP1
CCP7
-
-
-
CCP5
-
-
-
-
-
PB7
89
-
-
-
-
NMI
-
-
-
-
-
-
-
PC0
80
-
-
-
TCK
SWCLK
-
-
-
-
-
-
-
-
PC1
79
-
-
-
TMS
SWDIO
-
-
-
-
-
-
-
-
PC2
78
-
-
-
TDI
-
-
-
-
-
-
-
-
PC3
77
-
-
-
TDO
SWO
-
-
-
-
-
-
-
-
PC4
25
-
CCP5
-
-
-
CCP2
CCP4
-
-
CCP1
-
-
PC5
24
-
CCP1
-
-
-
CCP3
-
-
-
-
-
-
PC6
23
-
CCP3
-
-
-
U1Rx
CCP0
-
-
-
-
-
PC7
22
-
CCP4
-
-
CCP0
U1Tx
-
-
-
-
-
-
PD0
10
AIN15
-
-
-
U2Rx
U1Rx
CCP6
-
-
-
-
-
PD1
11
AIN14
-
-
-
U2Tx
U1Tx
CCP7
-
-
-
CCP2
-
PD2
12
AIN13
U1Rx
CCP6
-
CCP5
-
-
-
-
-
-
-
PD3
13
AIN12
U1Tx
CCP7
-
CCP0
-
-
-
-
-
-
-
PD4
95
AIN7
CCP0
CCP3
-
-
-
-
-
-
-
-
-
PD5
96
AIN6
CCP2
CCP4
-
-
-
-
-
-
U2Rx
-
-
PD6
99
AIN5
-
-
-
-
-
-
-
-
U2Tx
-
-
PD7
100
AIN4
-
-
CCP1
-
-
-
-
-
-
-
-
PE0
72
-
-
SSI1Clk
CCP3
-
-
-
-
-
-
-
-
PE1
73
-
-
SSI1Fss
-
CCP2
CCP6
-
-
-
-
-
-
PE2
74
AIN9
CCP4
SSI1Rx
-
-
CCP2
-
-
-
-
-
-
PE3
75
AIN8
CCP1
SSI1Tx
-
-
CCP7
-
-
-
-
-
-
PE4
6
AIN3
CCP3
-
-
-
U2Tx
CCP2
-
-
-
-
-
PE5
5
AIN2
CCP5
-
-
-
-
-
-
-
-
-
-
PE6
2
AIN1
-
-
-
-
-
-
-
-
-
-
-
PE7
1
AIN0
-
-
-
-
-
-
-
-
-
-
-
PF0
47
-
-
-
-
-
-
-
-
-
U1DSR
-
-
PF1
61
-
-
-
-
-
-
-
-
-
-
CCP3
-
PF2
60
-
-
-
-
-
-
-
-
-
SSI1Clk
-
-
PF3
59
-
-
-
-
-
-
-
-
-
SSI1Fss
-
-
PF4
58
-
CCP0
-
-
-
-
-
-
-
SSI1Rx
-
-
PF5
46
-
CCP2
-
-
-
-
-
-
-
SSI1Tx
-
-
758
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-5. GPIO Pins and Alternate Functions (continued)
a
Digital Function (GPIOPCTL PMCx Bit Field Encoding)
IO
Pin
Analog
Function
1
2
3
4
5
6
7
8
9
10
11
PF6
43
-
CCP1
-
-
-
-
-
-
-
-
-
-
PF7
42
-
CCP4
-
-
-
-
-
-
-
-
-
-
PG0
19
-
U2Rx
-
I2C1SCL
-
-
-
-
-
-
-
-
PG1
18
-
U2Tx
-
I2C1SDA
-
-
-
-
-
-
-
-
PG2
17
-
-
-
-
-
-
-
-
-
-
-
-
PG3
16
-
-
-
-
-
-
-
-
-
-
-
-
PG4
41
-
CCP3
-
-
-
-
-
-
-
-
-
-
PG5
40
-
CCP5
-
-
-
-
-
-
-
-
-
-
PG6
37
-
-
-
-
-
-
-
-
-
-
-
-
PG7
36
-
-
-
-
-
-
-
-
CCP5
-
-
-
PH0
86
-
CCP6
-
-
-
-
-
-
-
-
-
-
PH1
85
-
CCP7
-
-
-
-
-
-
-
-
-
-
PH2
84
-
-
-
-
-
-
-
-
-
-
-
-
PH3
83
-
-
-
-
-
-
-
-
-
-
-
-
a. The digital signals that are shaded gray are the power-on default values for the corresponding GPIO pin.
July 25, 2011
759
Texas Instruments-Production Data
Signal Tables
Table 17-6. Possible Pin Assignments for Alternate Functions
# of Possible Assignments
Alternate Function
GPIO Function
AIN0
PE7
AIN1
PE6
AIN10
PB4
AIN11
PB5
AIN12
PD3
AIN13
PD2
AIN14
PD1
AIN15
PD0
AIN2
PE5
AIN3
PE4
AIN4
PD7
AIN5
PD6
AIN6
PD5
AIN7
PD4
AIN8
PE3
AIN9
PE2
I2C0SCL
PB2
I2C0SDA
PB3
one
NMI
PB7
SSI0Clk
PA2
SSI0Fss
PA3
SSI0Rx
PA4
SSI0Tx
PA5
SWCLK
PC0
SWDIO
PC1
SWO
PC3
TCK
PC0
TDI
PC2
TDO
PC3
TMS
PC1
U0Rx
PA0
U0Tx
PA1
U1DSR
PF0
VREFA
PB6
SSI1Clk
PE0 PF2
SSI1Fss
PE1 PF3
SSI1Rx
PE2 PF4
SSI1Tx
PE3 PF5
I2C1SCL
PA0 PA6 PG0
I2C1SDA
PA1 PA7 PG1
two
three
760
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-6. Possible Pin Assignments for Alternate Functions (continued)
# of Possible Assignments
Alternate Function
GPIO Function
U2Rx
PB4 PD0 PD5 PG0
U2Tx
PD1 PD6 PE4 PG1
four
CCP6
PB5 PD0 PD2 PE1 PH0
CCP7
PB6 PD1 PD3 PE3 PH1
CCP4
PA7 PC4 PC7 PD5 PE2 PF7
U1Rx
PA0 PB0 PB4 PC6 PD0 PD2
U1Tx
PA1 PB1 PB5 PC7 PD1 PD3
CCP5
PB5 PB6 PC4 PD2 PE5 PG5 PG7
CCP0
PB0 PB2 PB5 PC6 PC7 PD3 PD4 PF4
CCP1
PA6 PB1 PB6 PC4 PC5 PD7 PE3 PF6
five
six
seven
eight
CCP2
PB1 PB5 PC4 PD1 PD5 PE1 PE2 PE4 PF5
CCP3
PA7 PB2 PC5 PC6 PD4 PE0 PE4 PF1 PG4
nine
17.2
108-Ball BGA Package Pin Tables
Table 17-7. Signals by Pin Number
Pin Number
Pin Name
Pin Type
A3
PE6
I/O
TTL
I
Analog
PD7
I/O
TTL
AIN4
I
Analog
CCP1
I/O
TTL
Capture/Compare/PWM 1.
GPIO port E bit 6.
GPIO port D bit 6.
Analog-to-digital converter input 1.
GPIO port D bit 7.
Analog-to-digital converter input 4.
PD6
I/O
TTL
AIN5
I
Analog
U2Tx
O
TTL
UART module 2 transmit. When in IrDA mode, this signal has IrDA
modulation.
PD4
I/O
TTL
GPIO port D bit 4.
AIN7
I
Analog
CCP0
I/O
TTL
Capture/Compare/PWM 0.
Capture/Compare/PWM 3.
A4
Analog-to-digital converter input 5.
Analog-to-digital converter input 7.
CCP3
I/O
TTL
GNDA
-
Power
PB4
I/O
TTL
AIN10
I
Analog
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
A5
A6
Description
AIN1
A1
A2
a
Buffer Type
The ground reference for the analog circuits (ADC, etc.). These
are separated from GND to minimize the electrical noise contained
on VDD from affecting the analog functions.
GPIO port B bit 4.
Analog-to-digital converter input 10.
July 25, 2011
761
Texas Instruments-Production Data
Signal Tables
Table 17-7. Signals by Pin Number (continued)
Pin Number
A7
Pin Type
Buffer Type
A10
A11
A12
PB6
I/O
TTL
GPIO port B bit 6.
I/O
TTL
Capture/Compare/PWM 1.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
Capture/Compare/PWM 7.
CCP7
I/O
TTL
VREFA
I
Analog
PB7
I/O
TTL
GPIO port B bit 7.
NMI
I
TTL
Non-maskable interrupt.
PC0
I/O
TTL
GPIO port C bit 0.
SWCLK
I
TTL
JTAG/SWD CLK.
TCK
I
TTL
JTAG/SWD CLK.
PC3
I/O
TTL
GPIO port C bit 3.
SWO
O
TTL
JTAG TDO and SWO.
TDO
O
TTL
JTAG TDO and SWO.
B3
B4
This input provides a reference voltage used to specify the input
voltage at which the ADC converts to a maximum value. In other
words, the voltage that is applied to VREFA is the voltage with which
an AINn signal is converted to 4095. The VREFA input is limited
to the range specified in Table 19-22 on page 797.
PE0
I/O
TTL
GPIO port E bit 0.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
SSI1Clk
I/O
TTL
SSI module 1 clock.
GPIO port E bit 3.
PE3
I/O
TTL
AIN8
I
Analog
CCP1
I/O
TTL
Capture/Compare/PWM 1.
CCP7
I/O
TTL
Capture/Compare/PWM 7.
SSI1Tx
O
TTL
SSI module 1 transmit.
GPIO port E bit 7.
PE7
I/O
TTL
AIN0
I
Analog
B1
B2
Description
CCP1
A8
A9
a
Pin Name
Analog-to-digital converter input 8.
Analog-to-digital converter input 0.
PE4
I/O
TTL
AIN3
I
Analog
GPIO port E bit 4.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
U2Tx
O
TTL
UART module 2 transmit. When in IrDA mode, this signal has IrDA
modulation.
PE5
I/O
TTL
GPIO port E bit 5.
AIN2
I
Analog
CCP5
I/O
TTL
Capture/Compare/PWM 5.
PD5
I/O
TTL
GPIO port D bit 5.
AIN6
I
Analog
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP4
I/O
TTL
Capture/Compare/PWM 4.
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
Analog-to-digital converter input 3.
Analog-to-digital converter input 2.
Analog-to-digital converter input 6.
762
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-7. Signals by Pin Number (continued)
Pin Number
a
Pin Name
Pin Type
Buffer Type
GNDA
-
Power
The ground reference for the analog circuits (ADC, etc.). These
are separated from GND to minimize the electrical noise contained
on VDD from affecting the analog functions.
GND
-
Power
Ground reference for logic and I/O pins.
PB5
I/O
TTL
AIN11
I
Analog
CCP0
I/O
TTL
Capture/Compare/PWM 0.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
CCP6
I/O
TTL
Capture/Compare/PWM 6.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
PC2
I/O
TTL
GPIO port C bit 2.
TDI
I
TTL
JTAG TDI.
PC1
I/O
TTL
GPIO port C bit 1.
SWDIO
I/O
TTL
JTAG TMS and SWDIO.
TMS
I
TTL
JTAG TMS and SWDIO.
CMOD1
I
TTL
CPU Mode bit 1. Input must be set to logic 0 (grounded); other
encodings reserved.
GPIO port E bit 2.
B5
B6
B7
B8
B9
B10
B11
C2
GPIO port B bit 5.
Analog-to-digital converter input 11.
PE2
I/O
TTL
AIN9
I
Analog
CCP2
I/O
TTL
Capture/Compare/PWM 2.
Analog-to-digital converter input 9.
CCP4
I/O
TTL
Capture/Compare/PWM 4.
SSI1Rx
I
TTL
SSI module 1 receive.
PE1
I/O
TTL
GPIO port E bit 1.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP6
I/O
TTL
Capture/Compare/PWM 6.
SSI1Fss
I/O
TTL
SSI module 1 frame.
NC
-
-
No connect. Leave the pin electrically unconnected/isolated.
No connect. Leave the pin electrically unconnected/isolated.
B12
C1
Description
NC
-
-
VDDC
-
Power
Positive supply for most of the logic function, including the
processor core and most peripherals.
C4
GND
-
Power
Ground reference for logic and I/O pins.
C5
GND
-
Power
Ground reference for logic and I/O pins.
VDDA
-
Power
The positive supply (3.3 V) for the analog circuits (ADC, Analog
Comparators, etc.). These are separated from VDD to minimize
the electrical noise contained on VDD from affecting the analog
functions. VDDA pins must be connected to 3.3 V, regardless of
system implementation.
VDDA
-
Power
The positive supply (3.3 V) for the analog circuits (ADC, Analog
Comparators, etc.). These are separated from VDD to minimize
the electrical noise contained on VDD from affecting the analog
functions. VDDA pins must be connected to 3.3 V, regardless of
system implementation.
C3
C6
C7
July 25, 2011
763
Texas Instruments-Production Data
Signal Tables
Table 17-7. Signals by Pin Number (continued)
Pin Number
Pin Type
Buffer Type
PH1
I/O
TTL
GPIO port H bit 1.
I/O
TTL
Capture/Compare/PWM 7.
PH0
I/O
TTL
GPIO port H bit 0.
CCP6
I/O
TTL
Capture/Compare/PWM 6.
PG7
I/O
TTL
GPIO port G bit 7.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
PB2
I/O
TTL
GPIO port B bit 2.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
C9
C10
C11
CCP3
I/O
TTL
Capture/Compare/PWM 3.
I2C0SCL
I/O
OD
I2C module 0 clock.
PB3
I/O
TTL
GPIO port B bit 3.
I2C0SDA
I/O
OD
I2C module 0 data.
NC
-
-
No connect. Leave the pin electrically unconnected/isolated.
No connect. Leave the pin electrically unconnected/isolated.
C12
D2
Description
CCP7
C8
D1
a
Pin Name
NC
-
-
VDDC
-
Power
D10
PH3
I/O
TTL
GPIO port H bit 3.
D11
PH2
I/O
TTL
GPIO port H bit 2.
D3
Positive supply for most of the logic function, including the
processor core and most peripherals.
PB1
I/O
TTL
GPIO port B bit 1. This pin is not 5-V tolerant.
CCP1
I/O
TTL
Capture/Compare/PWM 1.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
E1
NC
-
-
No connect. Leave the pin electrically unconnected/isolated.
E2
NC
-
-
No connect. Leave the pin electrically unconnected/isolated.
LDO
-
Power
Low drop-out regulator output voltage. This pin requires an external
capacitor between the pin and GND of 1 µF or greater. When the
on-chip LDO is used to provide power to the logic, the LDO pin
must also be connected to the VDDC pins at the board level in
addition to the decoupling capacitor(s).
VDD
-
Power
Positive supply for I/O and some logic.
CMOD0
I
TTL
CPU Mode bit 0. Input must be set to logic 0 (grounded); other
encodings reserved.
PB0
I/O
TTL
GPIO port B bit 0. This pin is not 5-V tolerant.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
NC
-
-
No connect. Leave the pin electrically unconnected/isolated.
No connect. Leave the pin electrically unconnected/isolated.
D12
E3
E10
E11
E12
F1
F2
NC
-
-
VDDC
-
Power
Positive supply for most of the logic function, including the
processor core and most peripherals.
F10
GND
-
Power
Ground reference for logic and I/O pins.
F11
GND
-
Power
Ground reference for logic and I/O pins.
F12
GND
-
Power
Ground reference for logic and I/O pins.
F3
764
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-7. Signals by Pin Number (continued)
Pin Number
G1
Pin Name
Pin Type
a
Buffer Type
Description
PD0
I/O
TTL
AIN15
I
Analog
GPIO port D bit 0.
CCP6
I/O
TTL
Capture/Compare/PWM 6.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
GPIO port D bit 1.
Analog-to-digital converter input 15.
PD1
I/O
TTL
AIN14
I
Analog
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP7
I/O
TTL
Capture/Compare/PWM 7.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
U2Tx
O
TTL
UART module 2 transmit. When in IrDA mode, this signal has IrDA
modulation.
VDDC
-
Power
Positive supply for most of the logic function, including the
processor core and most peripherals.
G10
VDD
-
Power
Positive supply for I/O and some logic.
G11
VDD
-
Power
Positive supply for I/O and some logic.
G12
VDD
-
Power
Positive supply for I/O and some logic.
PD3
I/O
TTL
AIN12
I
Analog
CCP0
I/O
TTL
Capture/Compare/PWM 0.
CCP7
I/O
TTL
Capture/Compare/PWM 7.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
GPIO port D bit 2.
G2
G3
H1
Analog-to-digital converter input 14.
GPIO port D bit 3.
Analog-to-digital converter input 12.
PD2
I/O
TTL
AIN13
I
Analog
CCP5
I/O
TTL
Capture/Compare/PWM 5.
CCP6
I/O
TTL
Capture/Compare/PWM 6.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
H3
GND
-
Power
Ground reference for logic and I/O pins.
H10
VDD
-
Power
Positive supply for I/O and some logic.
H11
RST
I
TTL
System reset input.
PF1
I/O
TTL
GPIO port F bit 1.
H2
H12
Analog-to-digital converter input 13.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
J1
PG2
I/O
TTL
GPIO port G bit 2.
J2
PG3
I/O
TTL
GPIO port G bit 3.
J3
GND
-
Power
Ground reference for logic and I/O pins.
J10
GND
-
Power
Ground reference for logic and I/O pins.
PF2
I/O
TTL
GPIO port F bit 2.
SSI1Clk
I/O
TTL
SSI module 1 clock.
J11
July 25, 2011
765
Texas Instruments-Production Data
Signal Tables
Table 17-7. Signals by Pin Number (continued)
Pin Number
Pin Type
Buffer Type
K2
Description
PF3
I/O
TTL
GPIO port F bit 3.
SSI1Fss
I/O
TTL
SSI module 1 frame.
PG0
I/O
TTL
GPIO port G bit 0.
I2C1SCL
I/O
OD
I2C module 1 clock.
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
PG1
I/O
TTL
GPIO port G bit 1.
I2C1SDA
I/O
OD
I2C module 1 data.
U2Tx
O
TTL
UART module 2 transmit. When in IrDA mode, this signal has IrDA
modulation.
J12
K1
a
Pin Name
PG4
I/O
TTL
GPIO port G bit 4.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
PF7
I/O
TTL
GPIO port F bit 7.
Capture/Compare/PWM 4.
K3
K4
CCP4
I/O
TTL
K5
GND
-
Power
Ground reference for logic and I/O pins.
K6
GND
-
Power
Ground reference for logic and I/O pins.
K7
VDD
-
Power
Positive supply for I/O and some logic.
K8
VDD
-
Power
Positive supply for I/O and some logic.
K9
VDD
-
Power
Positive supply for I/O and some logic.
K10
GND
-
Power
Ground reference for logic and I/O pins.
XOSC0
I
Analog
Hibernation module oscillator crystal input or an external clock
reference input. Note that this is either a 4.194304-MHz crystal or
a 32.768-kHz oscillator for the Hibernation module RTC. See the
CLKSEL bit in the HIBCTL register.
XOSC1
O
Analog
Hibernation module oscillator crystal output. Leave unconnected
when using a single-ended clock source.
PC4
I/O
TTL
GPIO port C bit 4.
CCP1
I/O
TTL
Capture/Compare/PWM 1.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP4
I/O
TTL
Capture/Compare/PWM 4.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
PC7
I/O
TTL
GPIO port C bit 7.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
CCP4
I/O
TTL
Capture/Compare/PWM 4.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
K11
K12
L1
L2
L3
PA0
I/O
TTL
GPIO port A bit 0.
I2C1SCL
I/O
OD
I2C module 1 clock.
U0Rx
I
TTL
UART module 0 receive. When in IrDA mode, this signal has IrDA
modulation.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
PA3
I/O
TTL
GPIO port A bit 3.
SSI0Fss
I/O
TTL
SSI module 0 frame.
L4
766
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-7. Signals by Pin Number (continued)
Pin Number
a
Pin Name
Pin Type
Buffer Type
Description
PA4
I/O
TTL
GPIO port A bit 4.
SSI0Rx
I
TTL
SSI module 0 receive.
PA6
I/O
TTL
GPIO port A bit 6.
L5
CCP1
I/O
TTL
Capture/Compare/PWM 1.
I2C1SCL
I/O
OD
I2C module 1 clock.
L7
PG6
I/O
TTL
GPIO port G bit 6.
PF5
I/O
TTL
GPIO port F bit 5.
L8
CCP2
I/O
TTL
Capture/Compare/PWM 2.
SSI1Tx
O
TTL
SSI module 1 transmit.
PF4
I/O
TTL
GPIO port F bit 4.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
SSI module 1 receive.
L6
L9
SSI1Rx
I
TTL
L10
GND
-
Power
Ground reference for logic and I/O pins.
L11
OSC0
I
Analog
Main oscillator crystal input or an external clock reference input.
VBAT
-
Power
Power source for the Hibernation module. It is normally connected
to the positive terminal of a battery and serves as the battery
backup/Hibernation module power-source supply.
PC5
I/O
TTL
GPIO port C bit 5.
CCP1
I/O
TTL
Capture/Compare/PWM 1.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
L12
M1
M2
M3
PC6
I/O
TTL
GPIO port C bit 6.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
PA1
I/O
TTL
GPIO port A bit 1.
I2C1SDA
I/O
OD
I2C module 1 data.
U0Tx
O
TTL
UART module 0 transmit. When in IrDA mode, this signal has IrDA
modulation.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
PA2
I/O
TTL
GPIO port A bit 2.
SSI0Clk
I/O
TTL
SSI module 0 clock.
PA5
I/O
TTL
GPIO port A bit 5.
SSI0Tx
O
TTL
SSI module 0 transmit.
PA7
I/O
TTL
GPIO port A bit 7.
CCP3
I/O
TTL
Capture/Compare/PWM 3.
M4
M5
M6
CCP4
I/O
TTL
Capture/Compare/PWM 4.
I2C1SDA
I/O
OD
I2C module 1 data.
PG5
I/O
TTL
GPIO port G bit 5.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
PF6
I/O
TTL
GPIO port F bit 6.
CCP1
I/O
TTL
Capture/Compare/PWM 1.
M7
M8
July 25, 2011
767
Texas Instruments-Production Data
Signal Tables
Table 17-7. Signals by Pin Number (continued)
Pin Number
Pin Type
Buffer Type
M11
M12
Description
PF0
I/O
TTL
GPIO port F bit 0.
U1DSR
I
TTL
UART module 1 Data Set Ready modem output control line.
WAKE
I
TTL
An external input that brings the processor out of Hibernate mode
when asserted.
OSC1
O
Analog
HIB
O
OD
M9
M10
a
Pin Name
Main oscillator crystal output. Leave unconnected when using a
single-ended clock source.
An output that indicates the processor is in Hibernate mode.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 17-8. Signals by Signal Name
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
AIN0
B1
PE7
I
Analog
Analog-to-digital converter input 0.
AIN1
A1
PE6
I
Analog
Analog-to-digital converter input 1.
AIN2
B3
PE5
I
Analog
Analog-to-digital converter input 2.
AIN3
B2
PE4
I
Analog
Analog-to-digital converter input 3.
AIN4
A2
PD7
I
Analog
Analog-to-digital converter input 4.
AIN5
A3
PD6
I
Analog
Analog-to-digital converter input 5.
AIN6
B4
PD5
I
Analog
Analog-to-digital converter input 6.
AIN7
A4
PD4
I
Analog
Analog-to-digital converter input 7.
AIN8
A12
PE3
I
Analog
Analog-to-digital converter input 8.
AIN9
B11
PE2
I
Analog
Analog-to-digital converter input 9.
AIN10
A6
PB4
I
Analog
Analog-to-digital converter input 10.
AIN11
B7
PB5
I
Analog
Analog-to-digital converter input 11.
AIN12
H1
PD3
I
Analog
Analog-to-digital converter input 12.
AIN13
H2
PD2
I
Analog
Analog-to-digital converter input 13.
AIN14
G2
PD1
I
Analog
Analog-to-digital converter input 14.
AIN15
G1
PD0
I
Analog
Analog-to-digital converter input 15.
CCP0
H1
L2
M2
L9
E12
C11
B7
A4
PD3 (4)
PC7 (4)
PC6 (6)
PF4 (1)
PB0 (1)
PB2 (5)
PB5 (4)
PD4 (1)
I/O
TTL
Capture/Compare/PWM 0.
CCP1
M1
L1
L6
M8
D12
A12
A7
A2
PC5 (1)
PC4 (9)
PA6 (2)
PF6 (1)
PB1 (4)
PE3 (1)
PB6 (1)
PD7 (3)
I/O
TTL
Capture/Compare/PWM 1.
768
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-8. Signals by Signal Name (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
CCP2
B2
G2
L1
L8
D12
B12
B11
B7
B4
PE4 (6)
PD1 (10)
PC4 (5)
PF5 (1)
PB1 (1)
PE1 (4)
PE2 (5)
PB5 (6)
PD5 (1)
I/O
TTL
Capture/Compare/PWM 2.
CCP3
B2
M2
M1
M6
K3
H12
C11
A11
A4
PE4 (1)
PC6 (1)
PC5 (5)
PA7 (7)
PG4 (1)
PF1 (10)
PB2 (4)
PE0 (3)
PD4 (2)
I/O
TTL
Capture/Compare/PWM 3.
CCP4
L2
L1
M6
K4
B11
B4
PC7 (1)
PC4 (6)
PA7 (2)
PF7 (1)
PE2 (1)
PD5 (2)
I/O
TTL
Capture/Compare/PWM 4.
CCP5
B3
H2
L1
C10
M7
A7
B7
PE5 (1)
PD2 (4)
PC4 (1)
PG7 (8)
PG5 (1)
PB6 (6)
PB5 (2)
I/O
TTL
Capture/Compare/PWM 5.
CCP6
G1
H2
B12
C9
B7
PD0 (6)
PD2 (2)
PE1 (5)
PH0 (1)
PB5 (3)
I/O
TTL
Capture/Compare/PWM 6.
CCP7
G2
H1
A12
C8
A7
PD1 (6)
PD3 (2)
PE3 (5)
PH1 (1)
PB6 (2)
I/O
TTL
Capture/Compare/PWM 7.
CMOD0
E11
fixed
I
TTL
CPU Mode bit 0. Input must be set to logic 0
(grounded); other encodings reserved.
CMOD1
B10
fixed
I
TTL
CPU Mode bit 1. Input must be set to logic 0
(grounded); other encodings reserved.
July 25, 2011
769
Texas Instruments-Production Data
Signal Tables
Table 17-8. Signals by Signal Name (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
GND
C4
H3
C5
J3
K6
K5
L10
K10
F10
J10
F11
B6
F12
fixed
-
Power
Ground reference for logic and I/O pins.
GNDA
A5
B5
fixed
-
Power
The ground reference for the analog circuits (ADC,
etc.). These are separated from GND to minimize
the electrical noise contained on VDD from affecting
the analog functions.
HIB
M12
fixed
O
OD
An output that indicates the processor is in
Hibernate mode.
I2C0SCL
C11
PB2 (1)
I/O
OD
I2C module 0 clock.
I2C0SDA
C12
PB3 (1)
I/O
OD
I2C module 0 data.
I2C1SCL
K1
L3
L6
PG0 (3)
PA0 (8)
PA6 (1)
I/O
OD
I2C module 1 clock.
I2C1SDA
K2
M3
M6
PG1 (3)
PA1 (8)
PA7 (1)
I/O
OD
I2C module 1 data.
LDO
E3
fixed
-
Power
NC
C1
C2
D2
D1
E1
E2
F1
F2
fixed
-
-
Low drop-out regulator output voltage. This pin
requires an external capacitor between the pin and
GND of 1 µF or greater. When the on-chip LDO is
used to provide power to the logic, the LDO pin must
also be connected to the VDDC pins at the board
level in addition to the decoupling capacitor(s).
No connect. Leave the pin electrically
unconnected/isolated.
NMI
A8
PB7 (4)
I
TTL
OSC0
L11
fixed
I
Analog
Non-maskable interrupt.
Main oscillator crystal input or an external clock
reference input.
OSC1
M11
fixed
O
Analog
Main oscillator crystal output. Leave unconnected
when using a single-ended clock source.
PA0
L3
-
I/O
TTL
GPIO port A bit 0.
PA1
M3
-
I/O
TTL
GPIO port A bit 1.
PA2
M4
-
I/O
TTL
GPIO port A bit 2.
PA3
L4
-
I/O
TTL
GPIO port A bit 3.
PA4
L5
-
I/O
TTL
GPIO port A bit 4.
770
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-8. Signals by Signal Name (continued)
Pin Name
PA5
Pin Number Pin Mux / Pin
Assignment
M5
-
a
Pin Type
Buffer Type
I/O
TTL
Description
GPIO port A bit 5.
PA6
L6
-
I/O
TTL
GPIO port A bit 6.
PA7
M6
-
I/O
TTL
GPIO port A bit 7.
PB0
E12
-
I/O
TTL
GPIO port B bit 0. This pin is not 5-V tolerant.
PB1
D12
-
I/O
TTL
GPIO port B bit 1. This pin is not 5-V tolerant.
PB2
C11
-
I/O
TTL
GPIO port B bit 2.
PB3
C12
-
I/O
TTL
GPIO port B bit 3.
PB4
A6
-
I/O
TTL
GPIO port B bit 4.
PB5
B7
-
I/O
TTL
GPIO port B bit 5.
PB6
A7
-
I/O
TTL
GPIO port B bit 6.
PB7
A8
-
I/O
TTL
GPIO port B bit 7.
PC0
A9
-
I/O
TTL
GPIO port C bit 0.
PC1
B9
-
I/O
TTL
GPIO port C bit 1.
PC2
B8
-
I/O
TTL
GPIO port C bit 2.
PC3
A10
-
I/O
TTL
GPIO port C bit 3.
PC4
L1
-
I/O
TTL
GPIO port C bit 4.
PC5
M1
-
I/O
TTL
GPIO port C bit 5.
PC6
M2
-
I/O
TTL
GPIO port C bit 6.
PC7
L2
-
I/O
TTL
GPIO port C bit 7.
PD0
G1
-
I/O
TTL
GPIO port D bit 0.
PD1
G2
-
I/O
TTL
GPIO port D bit 1.
PD2
H2
-
I/O
TTL
GPIO port D bit 2.
PD3
H1
-
I/O
TTL
GPIO port D bit 3.
PD4
A4
-
I/O
TTL
GPIO port D bit 4.
PD5
B4
-
I/O
TTL
GPIO port D bit 5.
PD6
A3
-
I/O
TTL
GPIO port D bit 6.
PD7
A2
-
I/O
TTL
GPIO port D bit 7.
PE0
A11
-
I/O
TTL
GPIO port E bit 0.
PE1
B12
-
I/O
TTL
GPIO port E bit 1.
PE2
B11
-
I/O
TTL
GPIO port E bit 2.
PE3
A12
-
I/O
TTL
GPIO port E bit 3.
PE4
B2
-
I/O
TTL
GPIO port E bit 4.
PE5
B3
-
I/O
TTL
GPIO port E bit 5.
PE6
A1
-
I/O
TTL
GPIO port E bit 6.
PE7
B1
-
I/O
TTL
GPIO port E bit 7.
PF0
M9
-
I/O
TTL
GPIO port F bit 0.
PF1
H12
-
I/O
TTL
GPIO port F bit 1.
PF2
J11
-
I/O
TTL
GPIO port F bit 2.
PF3
J12
-
I/O
TTL
GPIO port F bit 3.
PF4
L9
-
I/O
TTL
GPIO port F bit 4.
PF5
L8
-
I/O
TTL
GPIO port F bit 5.
July 25, 2011
771
Texas Instruments-Production Data
Signal Tables
Table 17-8. Signals by Signal Name (continued)
Pin Name
PF6
Pin Number Pin Mux / Pin
Assignment
M8
-
a
Pin Type
Buffer Type
I/O
TTL
Description
GPIO port F bit 6.
PF7
K4
-
I/O
TTL
GPIO port F bit 7.
PG0
K1
-
I/O
TTL
GPIO port G bit 0.
PG1
K2
-
I/O
TTL
GPIO port G bit 1.
PG2
J1
-
I/O
TTL
GPIO port G bit 2.
PG3
J2
-
I/O
TTL
GPIO port G bit 3.
PG4
K3
-
I/O
TTL
GPIO port G bit 4.
PG5
M7
-
I/O
TTL
GPIO port G bit 5.
PG6
L7
-
I/O
TTL
GPIO port G bit 6.
PG7
C10
-
I/O
TTL
GPIO port G bit 7.
PH0
C9
-
I/O
TTL
GPIO port H bit 0.
PH1
C8
-
I/O
TTL
GPIO port H bit 1.
PH2
D11
-
I/O
TTL
GPIO port H bit 2.
PH3
D10
-
I/O
TTL
GPIO port H bit 3.
RST
H11
fixed
I
TTL
System reset input.
SSI0Clk
M4
PA2 (1)
I/O
TTL
SSI module 0 clock.
SSI0Fss
L4
PA3 (1)
I/O
TTL
SSI module 0 frame.
SSI0Rx
L5
PA4 (1)
I
TTL
SSI module 0 receive.
SSI0Tx
M5
PA5 (1)
O
TTL
SSI module 0 transmit.
SSI1Clk
J11
A11
PF2 (9)
PE0 (2)
I/O
TTL
SSI module 1 clock.
SSI1Fss
J12
B12
PF3 (9)
PE1 (2)
I/O
TTL
SSI module 1 frame.
SSI1Rx
L9
B11
PF4 (9)
PE2 (2)
I
TTL
SSI module 1 receive.
SSI1Tx
L8
A12
PF5 (9)
PE3 (2)
O
TTL
SSI module 1 transmit.
SWCLK
A9
PC0 (3)
I
TTL
JTAG/SWD CLK.
SWDIO
B9
PC1 (3)
I/O
TTL
JTAG TMS and SWDIO.
SWO
A10
PC3 (3)
O
TTL
JTAG TDO and SWO.
TCK
A9
PC0 (3)
I
TTL
JTAG/SWD CLK.
TDI
B8
PC2 (3)
I
TTL
JTAG TDI.
TDO
A10
PC3 (3)
O
TTL
JTAG TDO and SWO.
TMS
B9
PC1 (3)
I
TTL
JTAG TMS and SWDIO.
U0Rx
L3
PA0 (1)
I
TTL
UART module 0 receive. When in IrDA mode, this
signal has IrDA modulation.
U0Tx
M3
PA1 (1)
O
TTL
UART module 0 transmit. When in IrDA mode, this
signal has IrDA modulation.
U1DSR
M9
PF0 (9)
I
TTL
UART module 1 Data Set Ready modem output
control line.
772
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-8. Signals by Signal Name (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
U1Rx
G1
H2
M2
L3
E12
A6
PD0 (5)
PD2 (1)
PC6 (5)
PA0 (9)
PB0 (5)
PB4 (7)
I
TTL
UART module 1 receive. When in IrDA mode, this
signal has IrDA modulation.
U1Tx
G2
H1
L2
M3
D12
B7
PD1 (5)
PD3 (1)
PC7 (5)
PA1 (9)
PB1 (5)
PB5 (7)
O
TTL
UART module 1 transmit. When in IrDA mode, this
signal has IrDA modulation.
U2Rx
G1
K1
A6
B4
PD0 (4)
PG0 (1)
PB4 (4)
PD5 (9)
I
TTL
UART module 2 receive. When in IrDA mode, this
signal has IrDA modulation.
U2Tx
B2
G2
K2
A3
PE4 (5)
PD1 (4)
PG1 (1)
PD6 (9)
O
TTL
UART module 2 transmit. When in IrDA mode, this
signal has IrDA modulation.
VBAT
L12
fixed
-
Power
Power source for the Hibernation module. It is
normally connected to the positive terminal of a
battery and serves as the battery
backup/Hibernation module power-source supply.
VDD
K7
G12
K8
K9
H10
G10
E10
G11
fixed
-
Power
Positive supply for I/O and some logic.
VDDA
C7
C6
fixed
-
Power
The positive supply (3.3 V) for the analog circuits
(ADC, Analog Comparators, etc.). These are
separated from VDD to minimize the electrical noise
contained on VDD from affecting the analog
functions. VDDA pins must be connected to 3.3 V,
regardless of system implementation.
VDDC
F3
D3
G3
C3
fixed
-
Power
Positive supply for most of the logic function,
including the processor core and most peripherals.
VREFA
A7
PB6
I
Analog
This input provides a reference voltage used to
specify the input voltage at which the ADC converts
to a maximum value. In other words, the voltage
that is applied to VREFA is the voltage with which
an AINn signal is converted to 4095. The VREFA
input is limited to the range specified in Table
19-22 on page 797.
WAKE
M10
fixed
I
TTL
An external input that brings the processor out of
Hibernate mode when asserted.
July 25, 2011
773
Texas Instruments-Production Data
Signal Tables
Table 17-8. Signals by Signal Name (continued)
Pin Name
Pin Number Pin Mux / Pin
Assignment
a
Pin Type
Buffer Type
Description
XOSC0
K11
fixed
I
Analog
Hibernation module oscillator crystal input or an
external clock reference input. Note that this is
either a 4.194304-MHz crystal or a 32.768-kHz
oscillator for the Hibernation module RTC. See the
CLKSEL bit in the HIBCTL register.
XOSC1
K12
fixed
O
Analog
Hibernation module oscillator crystal output. Leave
unconnected when using a single-ended clock
source.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 17-9. Signals by Function, Except for GPIO
Function
ADC
Pin Name
a
Pin Number
Pin Type
Buffer Type
AIN0
B1
I
Analog
Analog-to-digital converter input 0.
Description
AIN1
A1
I
Analog
Analog-to-digital converter input 1.
AIN2
B3
I
Analog
Analog-to-digital converter input 2.
AIN3
B2
I
Analog
Analog-to-digital converter input 3.
AIN4
A2
I
Analog
Analog-to-digital converter input 4.
AIN5
A3
I
Analog
Analog-to-digital converter input 5.
AIN6
B4
I
Analog
Analog-to-digital converter input 6.
AIN7
A4
I
Analog
Analog-to-digital converter input 7.
AIN8
A12
I
Analog
Analog-to-digital converter input 8.
AIN9
B11
I
Analog
Analog-to-digital converter input 9.
AIN10
A6
I
Analog
Analog-to-digital converter input 10.
AIN11
B7
I
Analog
Analog-to-digital converter input 11.
AIN12
H1
I
Analog
Analog-to-digital converter input 12.
AIN13
H2
I
Analog
Analog-to-digital converter input 13.
AIN14
G2
I
Analog
Analog-to-digital converter input 14.
AIN15
G1
I
Analog
Analog-to-digital converter input 15.
VREFA
A7
I
Analog
This input provides a reference voltage used to
specify the input voltage at which the ADC converts
to a maximum value. In other words, the voltage
that is applied to VREFA is the voltage with which
an AINn signal is converted to 4095. The VREFA
input is limited to the range specified in Table
19-22 on page 797.
774
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-9. Signals by Function, Except for GPIO (continued)
Function
Pin Name
a
Pin Number
Pin Type
Buffer Type
CCP0
H1
L2
M2
L9
E12
C11
B7
A4
I/O
TTL
Capture/Compare/PWM 0.
CCP1
M1
L1
L6
M8
D12
A12
A7
A2
I/O
TTL
Capture/Compare/PWM 1.
CCP2
B2
G2
L1
L8
D12
B12
B11
B7
B4
I/O
TTL
Capture/Compare/PWM 2.
CCP3
B2
M2
M1
M6
K3
H12
C11
A11
A4
I/O
TTL
Capture/Compare/PWM 3.
CCP4
L2
L1
M6
K4
B11
B4
I/O
TTL
Capture/Compare/PWM 4.
CCP5
B3
H2
L1
C10
M7
A7
B7
I/O
TTL
Capture/Compare/PWM 5.
CCP6
G1
H2
B12
C9
B7
I/O
TTL
Capture/Compare/PWM 6.
I/O
TTL
Capture/Compare/PWM 7.
General-Purpose
Timers
CCP7
Description
July 25, 2011
775
Texas Instruments-Production Data
Signal Tables
Table 17-9. Signals by Function, Except for GPIO (continued)
Function
Pin Name
Pin Number
a
Pin Type
Buffer Type
Description
G2
H1
A12
C8
A7
HIB
M12
O
OD
VBAT
L12
-
Power
Power source for the Hibernation module. It is
normally connected to the positive terminal of a
battery and serves as the battery
backup/Hibernation module power-source supply.
WAKE
M10
I
TTL
An external input that brings the processor out of
Hibernate mode when asserted.
XOSC0
K11
I
Analog
Hibernation module oscillator crystal input or an
external clock reference input. Note that this is
either a 4.194304-MHz crystal or a 32.768-kHz
oscillator for the Hibernation module RTC. See the
CLKSEL bit in the HIBCTL register.
XOSC1
K12
O
Analog
Hibernation module oscillator crystal output. Leave
unconnected when using a single-ended clock
source.
I2C0SCL
C11
I/O
OD
I2C module 0 clock.
I2C0SDA
C12
I/O
OD
I2C module 0 data.
I2C1SCL
K1
L3
L6
I/O
OD
I2C module 1 clock.
I2C1SDA
K2
M3
M6
I/O
OD
I2C module 1 data.
SWCLK
A9
I
TTL
JTAG/SWD CLK.
SWDIO
B9
I/O
TTL
JTAG TMS and SWDIO.
SWO
A10
O
TTL
JTAG TDO and SWO.
TCK
A9
I
TTL
JTAG/SWD CLK.
Hibernate
I2C
JTAG/SWD/SWO
An output that indicates the processor is in
Hibernate mode.
TDI
B8
I
TTL
JTAG TDI.
TDO
A10
O
TTL
JTAG TDO and SWO.
TMS
B9
I
TTL
JTAG TMS and SWDIO.
776
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-9. Signals by Function, Except for GPIO (continued)
Function
Pin Name
a
Pin Number
Pin Type
Buffer Type
GND
C4
H3
C5
J3
K6
K5
L10
K10
F10
J10
F11
B6
F12
-
Power
Ground reference for logic and I/O pins.
GNDA
A5
B5
-
Power
The ground reference for the analog circuits (ADC,
etc.). These are separated from GND to minimize
the electrical noise contained on VDD from affecting
the analog functions.
LDO
E3
-
Power
Low drop-out regulator output voltage. This pin
requires an external capacitor between the pin and
GND of 1 µF or greater. When the on-chip LDO is
used to provide power to the logic, the LDO pin must
also be connected to the VDDC pins at the board
level in addition to the decoupling capacitor(s).
VDD
K7
G12
K8
K9
H10
G10
E10
G11
-
Power
Positive supply for I/O and some logic.
VDDA
C7
C6
-
Power
The positive supply (3.3 V) for the analog circuits
(ADC, Analog Comparators, etc.). These are
separated from VDD to minimize the electrical noise
contained on VDD from affecting the analog
functions. VDDA pins must be connected to 3.3 V,
regardless of system implementation.
VDDC
F3
D3
G3
C3
-
Power
Positive supply for most of the logic function,
including the processor core and most peripherals.
SSI0Clk
M4
I/O
TTL
SSI module 0 clock.
SSI0Fss
L4
I/O
TTL
SSI module 0 frame.
SSI0Rx
L5
I
TTL
SSI module 0 receive.
Power
Description
SSI0Tx
M5
O
TTL
SSI module 0 transmit.
SSI1Clk
J11
A11
I/O
TTL
SSI module 1 clock.
SSI1Fss
J12
B12
I/O
TTL
SSI module 1 frame.
SSI1Rx
L9
B11
I
TTL
SSI module 1 receive.
SSI1Tx
L8
A12
O
TTL
SSI module 1 transmit.
SSI
July 25, 2011
777
Texas Instruments-Production Data
Signal Tables
Table 17-9. Signals by Function, Except for GPIO (continued)
Function
Pin Name
System Control &
Clocks
UART
a
Pin Number
Pin Type
Buffer Type
Description
CMOD0
E11
I
TTL
CPU Mode bit 0. Input must be set to logic 0
(grounded); other encodings reserved.
CMOD1
B10
I
TTL
CPU Mode bit 1. Input must be set to logic 0
(grounded); other encodings reserved.
NMI
A8
I
TTL
Non-maskable interrupt.
OSC0
L11
I
Analog
Main oscillator crystal input or an external clock
reference input.
OSC1
M11
O
Analog
Main oscillator crystal output. Leave unconnected
when using a single-ended clock source.
RST
H11
I
TTL
System reset input.
U0Rx
L3
I
TTL
UART module 0 receive. When in IrDA mode, this
signal has IrDA modulation.
U0Tx
M3
O
TTL
UART module 0 transmit. When in IrDA mode, this
signal has IrDA modulation.
U1DSR
M9
I
TTL
UART module 1 Data Set Ready modem output
control line.
U1Rx
G1
H2
M2
L3
E12
A6
I
TTL
UART module 1 receive. When in IrDA mode, this
signal has IrDA modulation.
U1Tx
G2
H1
L2
M3
D12
B7
O
TTL
UART module 1 transmit. When in IrDA mode, this
signal has IrDA modulation.
U2Rx
G1
K1
A6
B4
I
TTL
UART module 2 receive. When in IrDA mode, this
signal has IrDA modulation.
U2Tx
B2
G2
K2
A3
O
TTL
UART module 2 transmit. When in IrDA mode, this
signal has IrDA modulation.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 17-10. GPIO Pins and Alternate Functions
a
Digital Function (GPIOPCTL PMCx Bit Field Encoding)
IO
Pin
Analog
Function
1
2
3
4
5
6
7
8
9
10
11
PA0
L3
-
U0Rx
-
-
-
-
-
-
I2C1SCL
U1Rx
-
-
PA1
M3
-
U0Tx
-
-
-
-
-
-
I2C1SDA
U1Tx
-
-
PA2
M4
-
SSI0Clk
-
-
-
-
-
-
-
-
-
-
PA3
L4
-
SSI0Fss
-
-
-
-
-
-
-
-
-
-
PA4
L5
-
SSI0Rx
-
-
-
-
-
-
-
-
-
-
PA5
M5
-
SSI0Tx
-
-
-
-
-
-
-
-
-
-
PA6
L6
-
I2C1SCL
CCP1
-
-
-
-
-
-
-
-
-
PA7
M6
-
I2C1SDA
CCP4
-
-
-
-
CCP3
-
-
-
-
778
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-10. GPIO Pins and Alternate Functions (continued)
a
Digital Function (GPIOPCTL PMCx Bit Field Encoding)
IO
Pin
Analog
Function
1
2
3
4
5
6
7
8
9
10
11
PB0
E12
-
CCP0
-
-
-
U1Rx
-
-
-
-
-
-
PB1
D12
-
CCP2
-
-
CCP1
U1Tx
-
-
-
-
-
-
PB2
C11
-
I2C0SCL
-
-
CCP3
CCP0
-
-
-
-
-
-
PB3
C12
-
I2C0SDA
-
-
-
-
-
-
-
-
-
-
PB4
A6
AIN10
-
-
-
U2Rx
-
-
U1Rx
-
-
-
-
PB5
B7
AIN11
-
CCP5
CCP6
CCP0
-
CCP2
U1Tx
-
-
-
-
PB6
A7
VREFA
CCP1
CCP7
-
-
-
CCP5
-
-
-
-
-
PB7
A8
-
-
-
-
NMI
-
-
-
-
-
-
-
PC0
A9
-
-
-
TCK
SWCLK
-
-
-
-
-
-
-
-
PC1
B9
-
-
-
TMS
SWDIO
-
-
-
-
-
-
-
-
PC2
B8
-
-
-
TDI
-
-
-
-
-
-
-
-
PC3
A10
-
-
-
TDO
SWO
-
-
-
-
-
-
-
-
PC4
L1
-
CCP5
-
-
-
CCP2
CCP4
-
-
CCP1
-
-
PC5
M1
-
CCP1
-
-
-
CCP3
-
-
-
-
-
-
PC6
M2
-
CCP3
-
-
-
U1Rx
CCP0
-
-
-
-
-
PC7
L2
-
CCP4
-
-
CCP0
U1Tx
-
-
-
-
-
-
PD0
G1
AIN15
-
-
-
U2Rx
U1Rx
CCP6
-
-
-
-
-
PD1
G2
AIN14
-
-
-
U2Tx
U1Tx
CCP7
-
-
-
CCP2
-
PD2
H2
AIN13
U1Rx
CCP6
-
CCP5
-
-
-
-
-
-
-
PD3
H1
AIN12
U1Tx
CCP7
-
CCP0
-
-
-
-
-
-
-
PD4
A4
AIN7
CCP0
CCP3
-
-
-
-
-
-
-
-
-
PD5
B4
AIN6
CCP2
CCP4
-
-
-
-
-
-
U2Rx
-
-
PD6
A3
AIN5
-
-
-
-
-
-
-
-
U2Tx
-
-
PD7
A2
AIN4
-
-
CCP1
-
-
-
-
-
-
-
-
PE0
A11
-
-
SSI1Clk
CCP3
-
-
-
-
-
-
-
-
PE1
B12
-
-
SSI1Fss
-
CCP2
CCP6
-
-
-
-
-
-
PE2
B11
AIN9
CCP4
SSI1Rx
-
-
CCP2
-
-
-
-
-
-
PE3
A12
AIN8
CCP1
SSI1Tx
-
-
CCP7
-
-
-
-
-
-
PE4
B2
AIN3
CCP3
-
-
-
U2Tx
CCP2
-
-
-
-
-
PE5
B3
AIN2
CCP5
-
-
-
-
-
-
-
-
-
-
PE6
A1
AIN1
-
-
-
-
-
-
-
-
-
-
-
PE7
B1
AIN0
-
-
-
-
-
-
-
-
-
-
-
PF0
M9
-
-
-
-
-
-
-
-
-
U1DSR
-
-
PF1
H12
-
-
-
-
-
-
-
-
-
-
CCP3
-
PF2
J11
-
-
-
-
-
-
-
-
-
SSI1Clk
-
-
PF3
J12
-
-
-
-
-
-
-
-
-
SSI1Fss
-
-
PF4
L9
-
CCP0
-
-
-
-
-
-
-
SSI1Rx
-
-
PF5
L8
-
CCP2
-
-
-
-
-
-
-
SSI1Tx
-
-
July 25, 2011
779
Texas Instruments-Production Data
Signal Tables
Table 17-10. GPIO Pins and Alternate Functions (continued)
a
Digital Function (GPIOPCTL PMCx Bit Field Encoding)
IO
Pin
Analog
Function
1
2
3
4
5
6
7
8
9
10
11
PF6
M8
-
CCP1
-
-
-
-
-
-
-
-
-
-
PF7
K4
-
CCP4
-
-
-
-
-
-
-
-
-
-
PG0
K1
-
U2Rx
-
I2C1SCL
-
-
-
-
-
-
-
-
PG1
K2
-
U2Tx
-
I2C1SDA
-
-
-
-
-
-
-
-
PG2
J1
-
-
-
-
-
-
-
-
-
-
-
-
PG3
J2
-
-
-
-
-
-
-
-
-
-
-
-
PG4
K3
-
CCP3
-
-
-
-
-
-
-
-
-
-
PG5
M7
-
CCP5
-
-
-
-
-
-
-
-
-
-
PG6
L7
-
-
-
-
-
-
-
-
-
-
-
-
PG7
C10
-
-
-
-
-
-
-
-
CCP5
-
-
-
PH0
C9
-
CCP6
-
-
-
-
-
-
-
-
-
-
PH1
C8
-
CCP7
-
-
-
-
-
-
-
-
-
-
PH2
D11
-
-
-
-
-
-
-
-
-
-
-
-
PH3
D10
-
-
-
-
-
-
-
-
-
-
-
-
a. The digital signals that are shaded gray are the power-on default values for the corresponding GPIO pin.
780
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-11. Possible Pin Assignments for Alternate Functions
# of Possible Assignments
Alternate Function
GPIO Function
AIN0
PE7
AIN1
PE6
AIN10
PB4
AIN11
PB5
AIN12
PD3
AIN13
PD2
AIN14
PD1
AIN15
PD0
AIN2
PE5
AIN3
PE4
AIN4
PD7
AIN5
PD6
AIN6
PD5
AIN7
PD4
AIN8
PE3
AIN9
PE2
I2C0SCL
PB2
I2C0SDA
PB3
one
NMI
PB7
SSI0Clk
PA2
SSI0Fss
PA3
SSI0Rx
PA4
SSI0Tx
PA5
SWCLK
PC0
SWDIO
PC1
SWO
PC3
TCK
PC0
TDI
PC2
TDO
PC3
TMS
PC1
U0Rx
PA0
U0Tx
PA1
U1DSR
PF0
VREFA
PB6
SSI1Clk
PF2 PE0
SSI1Fss
PF3 PE1
SSI1Rx
PF4 PE2
SSI1Tx
PF5 PE3
I2C1SCL
PG0 PA0 PA6
I2C1SDA
PG1 PA1 PA7
two
three
July 25, 2011
781
Texas Instruments-Production Data
Signal Tables
Table 17-11. Possible Pin Assignments for Alternate Functions (continued)
# of Possible Assignments
Alternate Function
GPIO Function
U2Rx
PD0 PG0 PB4 PD5
U2Tx
PE4 PD1 PG1 PD6
four
CCP6
PD0 PD2 PE1 PH0 PB5
CCP7
PD1 PD3 PE3 PH1 PB6
CCP4
PC7 PC4 PA7 PF7 PE2 PD5
U1Rx
PD0 PD2 PC6 PA0 PB0 PB4
U1Tx
PD1 PD3 PC7 PA1 PB1 PB5
CCP5
PE5 PD2 PC4 PG7 PG5 PB6 PB5
CCP0
PD3 PC7 PC6 PF4 PB0 PB2 PB5 PD4
CCP1
PC5 PC4 PA6 PF6 PB1 PE3 PB6 PD7
five
six
seven
eight
CCP2
PE4 PD1 PC4 PF5 PB1 PE1 PE2 PB5 PD5
CCP3
PE4 PC6 PC5 PA7 PG4 PF1 PB2 PE0 PD4
nine
17.3
Connections for Unused Signals
Table 17-12 on page 782 show how to handle signals for functions that are not used in a particular
system implementation for devices that are in a 100-pin LQFP package. Two options are shown in
the table: an acceptable practice and a preferred practice for reduced power consumption and
improved EMC characteristics. If a module is not used in a system, and its inputs are grounded, it
is important that the clock to the module is never enabled by setting the corresponding bit in the
RCGCx register.
Table 17-12. Connections for Unused Signals (100-Pin LQFP)
Function
GPIO
Hibernate
No Connects
System Control
USB0RBIAS
Signal Name
Pin Number
Acceptable Practice
Preferred Practice
All unused GPIOs
-
NC
GND
HIB
51
NC
NC
VBAT
55
NC
GND
WAKE
50
NC
GND
XOSC0
52
NC
GND
XOSC1
53
NC
NC
NC
-
NC
NC
OSC0
48
NC
GND
OSC1
49
NC
NC
RST
64
Pull up as shown in Figure
5-1 on page 171
Connect through a capacitor
to GND as close to pin as
possible
73
Connect to GND
through 10-kΩ
resistor.
Connect to GND through
10-kΩ resistor.
Table 17-13 on page 783 show how to handle signals for functions that are not used in a particular
system implementation for devices that are in a 108-ball BGA package. Two options are shown in
the table: an acceptable practice and a preferred practice for reduced power consumption and
improved EMC characteristics. If a module is not used in a system, and its inputs are grounded, it
is important that the clock to the module is never enabled by setting the corresponding bit in the
RCGCx register.
782
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 17-13. Connections for Unused Signals (108-Ball BGA)
Function
GPIO
Hibernate
No Connects
System Control
Signal Name
Pin Number
Acceptable Practice
Preferred Practice
All unused GPIOs
-
NC
GND
HIB
M12
NC
NC
VBAT
L12
NC
GND
WAKE
M10
NC
GND
XOSC0
K11
NC
GND
XOSC1
K12
NC
NC
NC
-
NC
NC
OSC0
L11
NC
GND
OSC1
M11
NC
NC
RST
H11
Pull up as shown in Figure Connect through a capacitor to
5-1 on page 171
GND as close to pin as possible
July 25, 2011
783
Texas Instruments-Production Data
Operating Characteristics
18
Operating Characteristics
Table 18-1. Temperature Characteristics
Characteristic
Symbol Value
Unit
Industrial operating temperature range TA
-40 to +85
°C
Unpowered storage temperature range TS
-65 to +150
°C
Table 18-2. Thermal Characteristics
Characteristic
Symbol Value
a
Thermal resistance (junction to ambient) ΘJA
Unit
33 (100LQFP)
°C/W
31 (108BGA)
b
Junction temperature, -40 to +125
TJ
TA + (P • ΘJA)
°C
a. Junction to ambient thermal resistance θJA numbers are determined by a package simulator.
b. Power dissipation is a function of temperature.
a
Table 18-3. ESD Absolute Maximum Ratings
Parameter Name
VESDHBM
VESDCDM
Min
Nom
Max
Unit
-
-
2.0
kV
-
-
500
V
®
a. All Stellaris parts are ESD tested following the JEDEC standard.
784
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
19
Electrical Characteristics
19.1
Maximum Ratings
The maximum ratings are the limits to which the device can be subjected without permanently
damaging the device.
Note:
The device is not guaranteed to operate properly at the maximum ratings.
Table 19-1. Maximum Ratings
Value
a
Parameter
Parameter Name
VDD
Unit
Min
Max
VDD supply voltage
0
4
V
VDDA
VDDA supply voltage
0
4
V
VBAT
VBAT battery supply voltage
0
4
V
-0.3
5.5
V
Input voltage
VIN
I
VNON
Input voltage for a GPIO configured as an analog input
-0.3
VDD + 0.3
V
Input voltage for PB0 and PB1 when configured as GPIO
-0.3
VDD + 0.3
V
Maximum current per output pin
-
25
mA
Maximum input voltage on a non-power pin when the
microcontroller is unpowered
-
300
mV
a. Voltages are measured with respect to GND.
Important: This device contains circuitry to protect the inputs against damage due to high-static
voltages or electric fields; however, it is advised that normal precautions be taken to
avoid application of any voltage higher than maximum-rated voltages to this
high-impedance circuit. Reliability of operation is enhanced if unused inputs are
connected to an appropriate logic voltage level (see “Connections for Unused
Signals” on page 782).
19.2
Recommended Operating Conditions
For special high-current applications, the GPIO output buffers may be used with the following
restrictions. With the GPIO pins configured as 8-mA output drivers, a total of four GPIO outputs may
be used to sink current loads up to 18 mA each. At 18-mA sink current loading, the VOL value is
specified as 1.2 V. The high-current GPIO package pins must be selected such that there are only
a maximum of two per side of the physical package or BGA pin group with the total number of
high-current GPIO outputs not exceeding four for the entire package.
Table 19-2. Recommended DC Operating Conditions
Parameter
Parameter Name
Min
Nom
Max
Unit
VDD
VDD supply voltage
3.0
3.3
3.6
V
VDDA
VDDA supply voltage
3.0
3.3
3.6
V
VDDC
VDDC supply voltage
1.235
1.3
1.365
V
-
5.0
V
VIH
High-level input voltage
2.1
VIL
Low-level input voltage
-0.3
-
1.2
V
High-level output voltage
2.4
-
-
V
a
VOH
July 25, 2011
785
Texas Instruments-Production Data
Electrical Characteristics
Table 19-2. Recommended DC Operating Conditions (continued)
Parameter
VOLa
Parameter Name
Min
Nom
Max
Unit
-
-
0.4
V
2-mA Drive
2.0
-
-
mA
4-mA Drive
4.0
-
-
mA
8-mA Drive
8.0
-
-
mA
2-mA Drive
2.0
-
-
mA
4-mA Drive
4.0
-
-
mA
8-mA Drive
8.0
-
-
mA
18
-
-
mA
Low-level output voltage
High-level source current, VOH=2.4 V
IOH
Low-level sink current, VOL=0.4 V
IOL
IOHC
High-current sink, VOL=1.2 V
a. VOL and VOH shift to 1.2 V when using high-current GPIOs.
19.3
Load Conditions
Unless otherwise specified, the following conditions are true for all timing measurements.
Figure 19-1. Load Conditions
CL = 16 pF for EPI0S[31:0] signals
50 pF for other digital I/O signals
pin
GND
19.4
JTAG and Boundary Scan
Table 19-3. JTAG Characteristics
Parameter
No.
Parameter
Parameter Name
Min
Nom
Max
Unit
J1
FTCK
TCK operational clock frequency
0
-
10
MHz
J2
TTCK
TCK operational clock period
J3
TTCK_LOW
TCK clock Low time
100
-
-
ns
-
tTCK
-
ns
J4
TTCK_HIGH
TCK clock High time
-
tTCK
-
ns
J5
J6
TTCK_R
TCK rise time
0
-
10
ns
TTCK_F
TCK fall time
0
-
10
ns
J7
TTMS_SU
TMS setup time to TCK rise
20
-
-
ns
J8
TTMS_HLD
TMS hold time from TCK rise
20
-
-
ns
J9
TTDI_SU
TDI setup time to TCK rise
25
-
-
ns
J10
TTDI_HLD
TDI hold time from TCK rise
25
-
-
ns
a
786
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 19-3. JTAG Characteristics (continued)
Parameter
No.
Parameter
Parameter Name
Min
Nom
Max
Unit
23
35
ns
15
26
ns
14
25
ns
TCK fall to Data Valid from High-Z, 8-mA drive with
slew rate control
18
29
ns
TCK fall to Data Valid from Data Valid, 2-mA drive
21
35
ns
14
25
ns
13
24
ns
TCK fall to Data Valid from Data Valid, 8-mA drive
with slew rate control
18
28
ns
TCK fall to High-Z from Data Valid, 2-mA drive
9
11
ns
7
9
ns
6
8
ns
7
9
ns
TCK fall to Data Valid from High-Z, 2-mA drive
TCK fall to Data Valid from High-Z, 4-mA drive
J11
TTDO_ZDV
TCK fall to Data Valid from High-Z, 8-mA drive
-
TCK fall to Data Valid from Data Valid, 4-mA drive
J12
TTDO_DV
TCK fall to Data Valid from Data Valid, 8-mA drive
-
TCK fall to High-Z from Data Valid, 4-mA drive
J13
TTDO_DVZ
TCK fall to High-Z from Data Valid, 8-mA drive
-
TCK fall to High-Z from Data Valid, 8-mA drive with
slew rate control
a. A ratio of at least 8:1 must be kept between the system clock and TCK.
Figure 19-2. JTAG Test Clock Input Timing
J2
J3
J4
TCK
J6
J5
Figure 19-3. JTAG Test Access Port (TAP) Timing
TCK
J7
TMS
TDI
J8
J8
TMS Input Valid
TMS Input Valid
J9
J9
J10
TDI Input Valid
J11
TDO
J7
J10
TDI Input Valid
J12
TDO Output Valid
July 25, 2011
J13
TDO Output Valid
787
Texas Instruments-Production Data
Electrical Characteristics
19.5
Power and Brown-out
Table 19-4. Power Characteristics
Parameter No.
Parameter
P1
VTH
Parameter Name
Min
Nom
Max
Unit
Power-On Reset threshold
-
2
-
V
P2
VBTH
Brown-Out Reset threshold
2.85
2.9
2.95
V
P3
TPOR
Power-On Reset timeout
6
-
18
ms
P4
TBOR
Brown-Out timeout
-
500
-
µs
P5
TIRPOR
Internal reset timeout after POR
-
-
2
ms
P6
TIRBOR
Internal reset timeout after BOR
-
-
2
ms
P7
TVDDRISE
Supply voltage (VDD) rise time (0V-3.0V)
-
-
10
ms
P8
TVDD2_3
Supply voltage (VDD) rise time (2.0V-3.0V)
-
-
6
ms
Figure 19-4. Power-On Reset Timing
P1
VDD
P3
/POR
(Internal)
P5
/Reset
(Internal)
Figure 19-5. Brown-Out Reset Timing
P2
VDD
P4
/BOR
(Internal)
P6
/Reset
(Internal)
788
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 19-6. Power-On Reset and Voltage Parameters
VDD
3.0
P8
2.0
P7
19.6
Reset
Table 19-5. Reset Characteristics
Parameter No.
Parameter
Min
Nom
Max
Unit
R1
TIRHWR
Internal reset timeout after hardware reset (RST
pin)
-
-
2
ms
R2
TIRSWR
Internal reset timeout after software-initiated
system reset
-
-
2
ms
R3
TIRWDR
Internal reset timeout after watchdog reset
-
-
2
ms
R4
TIRMFR
Internal reset timeout after MOSC failure reset
-
-
2
ms
2
-
-
µs
R5
Parameter Name
a
Minimum RST pulse width
TMIN
a. This specification must be met in order to guarantee proper reset operation.
Figure 19-7. External Reset Timing (RST)
RST
R1
R13
R5
/Reset
(Internal)
Figure 19-8. Software Reset Timing
SW Reset
R2
/Reset
(Internal)
July 25, 2011
789
Texas Instruments-Production Data
Electrical Characteristics
Figure 19-9. Watchdog Reset Timing
WDOG
Reset
(Internal)
R3
/Reset
(Internal)
Figure 19-10. MOSC Failure Reset Timing
MOSC
Fail Reset
(Internal)
R4
/Reset
(Internal)
19.7
On-Chip Low Drop-Out (LDO) Regulator
Table 19-6. LDO Regulator Characteristics
Parameter
19.8
Parameter Name
Min
Nom
Max
Unit
CLDO
External filter capacitor size for internal
power supply
1.0
-
3.0
µF
VLDO
LDO output voltage
1.235
1.3
1.365
V
Clocks
The following sections provide specifications on the various clock sources and mode.
19.8.1
PLL Specifications
The following tables provide specifications for using the PLL.
Table 19-7. Phase Locked Loop (PLL) Characteristics
Parameter
Parameter Name
Min
Nom
Max
Unit
FREF_XTAL
Crystal reference
3.579545
-
16.384
MHz
FREF_EXT
External clock referencea
3.579545
-
16.384
MHz
400
-
MHz
-
1.38
a
b
FPLL
PLL frequency
-
TREADY
PLL lock time
0.562
c
d
ms
a. The exact value is determined by the crystal value programmed into the XTAL field of the Run-Mode Clock Configuration
(RCC) register.
b. PLL frequency is automatically calculated by the hardware based on the XTAL field of the RCC register.
c. Using a 16.384-MHz crystal
d. Using 3.5795-MHz crystal
Table 19-8 on page 791 shows the actual frequency of the PLL based on the crystal frequency used
(defined by the XTAL field in the RCC register).
790
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 19-8. Actual PLL Frequency
19.8.2
XTAL
Crystal Frequency (MHz)
PLL Frequency (MHz)
Error
0x04
0x05
3.5795
400.904
0.0023%
3.6864
398.1312
0.0047%
0x06
4.0
400
-
0x07
4.096
401.408
0.0035%
0x08
4.9152
398.1312
0.0047%
0x09
5.0
400
-
0x0A
5.12
399.36
0.0016%
0x0B
6.0
400
-
0x0C
6.144
399.36
0.0016%
0x0D
7.3728
398.1312
0.0047%
0x0E
8.0
400
-
0x0F
8.192
398.6773333
0.0033%
0x10
10.0
400
-
0x11
12.0
400
-
0x12
12.288
401.408
0.0035%
0x13
13.56
397.76
0.0056%
0x14
14.318
400.90904
0.0023%
0x15
16.0
400
-
0x16
16.384
404.1386667
0.010%
PIOSC Specifications
Table 19-9. PIOSC Clock Characteristics
Parameter
19.8.3
Min
Nom
Max
Unit
FPIOSC25
Parameter Name
Internal 16-MHz precision oscillator frequency variance,
factory calibrated at 25 °C
-
±0.25%
±1%
-
FPIOSCT
Internal 16-MHz precision oscillator frequency variance,
factory calibrated at 25 °C, across specified temperature
range
-
-
±3%
-
FPIOSCUCAL
Internal 16-MHz precision oscillator frequency variance,
user calibrated at a chosen temperature
-
±0.25%
±1%
-
Internal 30-kHz Oscillator Specifications
Table 19-10. 30-kHz Clock Characteristics
19.8.4
Parameter
Parameter Name
FIOSC30KHZ
Internal 30-KHz oscillator frequency
Min
Nom
Max
Unit
15
30
45
KHz
Hibernation Clock Source Specifications
Table 19-11. Hibernation Clock Characteristics
Parameter
FHIBOSC
FHIBOSC_XTAL
Parameter Name
Min
Nom
Max
Unit
Hibernation module oscillator frequency
-
4.194304
-
MHz
Crystal reference for hibernation oscillator
-
4.194304
-
MHz
July 25, 2011
791
Texas Instruments-Production Data
Electrical Characteristics
Table 19-11. Hibernation Clock Characteristics (continued)
Parameter
Parameter Name
Min
a
THIBOSC_START
FHIBOSC_EXT
DCHIBOSC_EXT
Nom
Max
Unit
Hibernation oscillator startup time
-
-
10
ms
External clock reference for hibernation
module
-
32.768
-
KHz
45
-
55
%
External clock reference duty cycle
a. This parameter is highly sensitive to PCB layout and trace lengths, which may make this parameter time longer. Care
must be taken in PCB design to minimize trace lengths and RLC (resistance, inductance, capacitance).
Table 19-12. HIB Oscillator Input Characteristics
Parameter
FHIBOSC
TOLHIBOSC
19.8.5
Parameter Name
Min
Nom
Max
Unit
Hibernation module oscillator
frequency
-
4.194304
-
MHz
Hibernation oscillator frequency
tolerance
-
Defined by customer
application requirements
-
PPM
Main Oscillator Specifications
Table 19-13. Main Oscillator Clock Characteristics
Parameter
FMOSC
TMOSC_PER
TMOSC_SETTLE
Parameter Name
Min
Nom
Max
Unit
1
-
16.384
MHz
61
-
1000
ns
17.5
-
20
ms
Main oscillator frequency
Main oscillator period
a
Main oscillator settling time
TREF_XTAL_BYPASS
Crystal reference using the main oscillator
b
(PLL in BYPASS mode)
1
-
16.384
MHz
FREF_EXT_BYPASS
External clock reference (PLL in BYPASS
b
mode)
0
-
50
MHz
External clock reference duty cycle
45
-
55
%
DCMOSC_EXT
a. This parameter is highly sensitive to PCB layout and trace lengths, which may make this parameter time longer. Care
must be taken in PCB design to minimize trace lengths and RLC (resistance, inductance, capacitance).
b. If the ADC is used, the crystal reference must be 16 MHz ± .03% when the PLL is bypassed.
Table 19-14. Supported MOSC Crystal Frequencies
Crystal Frequency (MHz) Not Using the PLL
Crystal Frequency (MHz) Using the PLL
1.000 MHz
reserved
1.8432 MHz
reserved
2.000 MHz
reserved
2.4576 MHz
reserved
3.579545 MHz
3.6864 MHz
4 MHz
4.096 MHz
4.9152 MHz
5 MHz
5.12 MHz
6 MHz (reset value)
792
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 19-14. Supported MOSC Crystal Frequencies (continued)
Crystal Frequency (MHz) Not Using the PLL
Crystal Frequency (MHz) Using the PLL
6.144 MHz
7.3728 MHz
8 MHz
8.192 MHz
10.0 MHz
12.0 MHz
12.288 MHz
13.56 MHz
14.31818 MHz
16.0 MHz
16.384 MHz
19.8.6
System Clock Specification with ADC Operation
Table 19-15. System Clock Characteristics with ADC Operation
Parameter
Fsysadc
19.9
Parameter Name
System clock frequency when the ADC
module is operating (when PLL is bypassed)
Min
Nom
Max
Unit
15.9952
16
16.0048
MHz
Sleep Modes
a
Table 19-16. Sleep Modes AC Characteristics
Parameter
No
Parameter
D1
TWAKE_S
D2
TWAKE_PLL_S
D3
TENTER_DS
Parameter Name
Min
Nom
Max
Unit
Time to wake from interrupt in sleep or
deep-sleep mode, not using the PLL
-
-
7
system clocks
Time to wake from interrupt in sleep or
deep-sleep mode when using the PLL
-
-
TREADY
ms
Time to enter deep-sleep mode from sleep
request
-
0
35
b
ms
a. Values in this table assume the IOSC is the clock source during sleep or deep-sleep mode.
b. Nominal specification occurs 99.9995% of the time.
19.10
Hibernation Module
The Hibernation module requires special system implementation considerations because it is intended
to power down all other sections of its host device, refer to “Hibernation Module” on page 263.
Table 19-17. Hibernation Module Battery Characteristics
Parameter
VBAT
VLOWBAT
Parameter Name
Min
Nominal
Max
Unit
Battery supply voltage
2.4
3.0
3.6
V
Low battery detect voltage
1.8
-
2.2
V
July 25, 2011
793
Texas Instruments-Production Data
Electrical Characteristics
Table 19-18. Hibernation Module AC Characteristics
Parameter
No
Parameter
Parameter Name
Min
Nom
Max
Unit
H1
THIB_LOW
Internal 32.768 KHz clock reference rising edge to
HIB asserted
20
-
-
μs
H2
THIB_HIGH
Internal 32.768 KHz clock reference rising edge to
HIB deasserted
-
30
-
μs
H3
TWAKE_TO_HIB
WAKE assert to HIB desassert (wake up time),
internal Hibernation oscillator running during
a
hibernation
62
-
124
μs
H4
TWAKE_TO_HIB
WAKE assert to HIB desassert (wake up time),
internal Hibernation oscillator stopped during
a
hibernation
-
-
10
ms
H5
TWAKE_CLOCK
WAKE assertion time, internal Hibernation oscillator
running during hibernation
62
-
-
μs
H6
TWAKE_NOCLOCK
WAKE assertion time, internal Hibernation oscillator
b
stopped during hibernation
10
-
-
ms
H7
THIB_REG_ACCESS
Time required for a write to a non-volatile register in
the HIB module to complete
92
-
-
μs
H8
THIB_TO_HIB
HIB high time between assertions
100
-
-
H9
TENTER_HIB
Time to enter hibernation mode from hibernation
request
-
0
ms
c
35
ms
a. Code begins executing after the time period specified by TIRPOR following the deassertion of HIB.
b. This mode is used when the PINWEN bit is set and the RTCEN bit is clear in the HIBCTL register.
c. Nominal specification occurs 99.998% of the time.
Figure 19-11. Hibernation Module Timing with Internal Oscillator Running in Hibernation
32.768 KHz
(internal)
H1
H2
H8
HIB
H3
WAKE
H5
Figure 19-12. Hibernation Module Timing with Internal Oscillator Stopped in Hibernation
32.768 KHz
(internal)
H1
H2
H8
HIB
H4
WAKE
H6
794
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
19.11
Flash Memory
Table 19-19. Flash Memory Characteristics
Parameter
PECYC
TRET
Parameter Name
Number of guaranteed program/erase cycles
a
before failure
Min
Nom
Max
Unit
15,000
-
-
cycles
10
-
-
years
Data retention, -40˚C to +85˚C
TPROG
Word program time
-
-
1
ms
TBPROG
Buffer program time
-
-
1
ms
TERASE
Page erase time
-
-
12
ms
TME
Mass erase time
-
-
16
ms
a. A program/erase cycle is defined as switching the bits from 1-> 0 -> 1.
19.12
GPIO Module
Note:
All GPIOs are 5-V tolerant, except PB0 and PB1. See “Signal Description” on page 395 for
more information on GPIO configuration.
Table 19-20. GPIO Module Characteristics
Parameter
Parameter Name
Min
Nom
Max
Unit
RGPIOPU
GPIO internal pull-up resistor
100
-
300
kΩ
RGPIOPD
GPIO internal pull-down resistor
200
-
500
kΩ
-
ILKG
a
GPIO input leakage current
-
2
µA
b
14
20
ns
b
7
10
ns
4
5
ns
GPIO Rise Time, 2-mA drive
TGPIOR
GPIO Rise Time, 4-mA drive
-
b
GPIO Rise Time, 8-mA drive
b
GPIO Rise Time, 8-mA drive with slew rate control
6
8
ns
c
14
21
ns
c
7
11
ns
4
6
ns
6
8
ns
GPIO Fall Time, 2-mA drive
TGPIOF
GPIO Fall Time, 4-mA drive
-
c
GPIO Fall Time, 8-mA drive
c
GPIO Fall Time, 8-mA drive with slew rate control
a. The leakage current is measured with GND or VDD applied to the corresponding pin(s). The leakage of digital port pins
is measured individually. The port pin is configured as an input and the pullup/pulldown resistor is disabled.
b. Time measured from 20% to 80% of VDD.
c. Time measured from 80% to 20% of VDD.
July 25, 2011
795
Texas Instruments-Production Data
Electrical Characteristics
19.13
Analog-to-Digital Converter (ADC)
a
Table 19-21. ADC Characteristics
Parameter Parameter Name
VADCIN
N
FADC
Min
Nom
Max
Unit
Maximum single-ended, full-scale analog input voltage,
using internal reference
-
-
3.0
V
Maximum single-ended, full-scale analog input voltage,
using external reference
-
-
VREFA
V
Minimum single-ended, full-scale analog input voltage
0.0
-
-
V
Maximum differential, full-scale analog input voltage,
using internal reference
-
-
1.5
V
Maximum differential, full-scale analog input voltage,
using external reference
-
-
VREFA/2
V
Minimum differential, full-scale analog input voltage
0.0
-
Resolution
b
ADC internal clock frequency
15.9952
16
1
µs
k samples/s
TADCSAMP
Sample time
125
-
Latency from trigger to start of conversion
-
ADC input leakage
-
RADC
ADC equivalent resistance
CADC
ADC equivalent capacitance
ED
EO
EG
ETS
MHz
1000
Conversion rate
EL
16.0048
c
Conversion time
FADCCONV
IL
V
bits
c
TADCCONV
TLT
12
-
ns
2
-
system clocks
-
2.0
µA
-
-
10
kΩ
0.9
1.0
1.1
pF
Integral nonlinearity (INL) error, 12-bit mode
-
-
±8
LSB
Integral nonlinearity (INL) error, 10-bit mode
-
-
±2
LSB
Differential nonlinearity (DNL) error, 12-bit mode
-
-
±4
LSB
Differential nonlinearity (DNL) error, 10-bit mode
-
-
±2
LSB
Offset error, 12-bit mode
-
-
±40
LSB
Offset error, 10-bit mode
-
-
±10
LSB
Full-scale gain error, 12-bit mode
-
-
±100
LSB
Full-scale gain error, 10-bit mode
-
-
±25
LSB
-
-
±5
°C
d
Temperature sensor accuracy
a. The ADC reference voltage is 3.0 V. This reference voltage is internally generated from the 3.3 VDDA supply by a band
gap circuit.
b. The ADC must be clocked from the PLL or directly from an external clock source to operate properly.
c. The conversion time and rate scale from the specified number if the ADC internal clock frequency is any value other than
16 MHz.
d. Note that this parameter does not include ADC error.
796
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 19-13. ADC Input Equivalency Diagram
Stellaris® Microcontroller
VDD
ESD
Clamp
RADC
ESD
Clamp
VIN
12-bit
converter
IL
CADC
Sample and hold
ADC converter
a
Table 19-22. ADC Module External Reference Characteristics
Parameter Parameter Name
VREFA
IL
Min
Nom
Max
Unit
External voltage reference for ADC, when the VREF field
b
in the ADCCTL register is 0x1
2.97
-
3.03
V
External voltage reference for ADC, when the VREF field
c
in the ADCCTL register is 0x3
0.99
-
1.01
V
-
-
2.0
µA
External voltage reference leakage current
a. Care must be taken to supply a reference voltage of acceptable quality.
b. Ground is always used as the reference level for the minimum conversion value.
c. Ground is always used as the reference level for the minimum conversion value.
Table 19-23. ADC Module Internal Reference Characteristics
Parameter
VREFI
19.14
Parameter Name
Internal voltage reference for ADC
Min
Nom
Max
Unit
-
3.0
-
V
Synchronous Serial Interface (SSI)
Table 19-24. SSI Characteristics
Parameter
No.
Parameter
Parameter Name
Min
S1
TCLK_PER
SSIClk cycle time
S2
TCLK_HIGH
SSIClk high time
S3
TCLK_LOW
SSIClk low time
a
Nom
Max
100
-
-
ns
-
0.5
-
t clk_per
-
0.5
-
t clk_per
b
Unit
S4
TCLKRF
SSIClk rise/fall time
-
4
6
ns
S5
TDMD
Data from master valid delay time
0
-
1
system clocks
S6
TDMS
Data from master setup time
1
-
-
system clocks
S7
TDMH
Data from master hold time
2
-
-
system clocks
S8
TDSS
Data from slave setup time
1
-
-
system clocks
July 25, 2011
797
Texas Instruments-Production Data
Electrical Characteristics
Table 19-24. SSI Characteristics (continued)
Parameter
No.
Parameter
S9
TDSH
Parameter Name
Data from slave hold time
Min
Nom
Max
Unit
2
-
-
system clocks
a. In master mode, the system clock must be at least twice as fast as the SSIClk; in slave mode, the system clock must be
at least 12 times faster than the SSIClk.
b. Note that the delays shown are using 8-mA drive strength.
Figure 19-14. SSI Timing for TI Frame Format (FRF=01), Single Transfer Timing Measurement
S1
S4
S2
SSIClk
S3
SSIFss
SSITx
SSIRx
MSB
LSB
4 to 16 bits
Figure 19-15. SSI Timing for MICROWIRE Frame Format (FRF=10), Single Transfer
S2
S1
SSIClk
S3
SSIFss
SSITx
MSB
LSB
8-bit control
SSIRx
0
MSB
LSB
4 to 16 bits output data
798
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Figure 19-16. SSI Timing for SPI Frame Format (FRF=00), with SPH=1
S1
S4
S2
SSIClk
(SPO=1)
S3
SSIClk
(SPO=0)
S6
SSITx
(master)
S7
MSB
S5
SSIRx
(slave)
S8
LSB
S9
MSB
LSB
SSIFss
19.15
Inter-Integrated Circuit (I2C) Interface
Table 19-25. I2C Characteristics
Parameter
No.
Parameter
Parameter Name
Min
Nom
Max
Unit
a
TSCH
Start condition hold time
36
-
-
system clocks
a
TLP
Clock Low period
36
-
-
system clocks
b
TSRT
I2CSCL/I2CSDA rise time (VIL =0.5 V
to V IH =2.4 V)
-
-
(see note
b)
ns
a
TDH
Data hold time
2
-
-
system clocks
c
TSFT
I2CSCL/I2CSDA fall time (VIH =2.4 V
to V IL =0.5 V)
-
9
10
ns
a
THT
Clock High time
24
-
-
system clocks
a
TDS
Data setup time
18
-
-
system clocks
a
TSCSR
Start condition setup time (for
repeated start condition only)
36
-
-
system clocks
a
TSCS
Stop condition setup time
24
-
-
system clocks
I1
I2
I3
I4
I5
I6
I7
I8
I9
a. Values depend on the value programmed into the TPR bit in the I2C Master Timer Period (I2CMTPR) register; a TPR
programmed for the maximum I2CSCL frequency (TPR=0x2) results in a minimum output timing as shown in the table
above. The I 2C interface is designed to scale the actual data transition time to move it to the middle of the I2CSCL Low
period. The actual position is affected by the value programmed into the TPR; however, the numbers given in the above
values are minimum values.
b. Because I2CSCL and I2CSDA are open-drain-type outputs, which the controller can only actively drive Low, the time
I2CSCL or I2CSDA takes to reach a high level depends on external signal capacitance and pull-up resistor values.
c. Specified at a nominal 50 pF load.
July 25, 2011
799
Texas Instruments-Production Data
Electrical Characteristics
Figure 19-17. I2C Timing
I2
I6
I5
I2CSCL
I1
I4
I7
I8
I3
I9
I2CSDA
19.16
Ethernet Controller
a
Table 19-26. 100BASE-TX Transmitter Characteristics
Parameter Name
Min
Nom
Max
Unit
Peak output amplitude
950
-
1050
mVpk
Output amplitude symmetry
98
-
102
%
Output overshoot
-
-
5
%
Rise/Fall time
3
-
5
ns
Rise/Fall time imbalance
-
-
500
ps
Duty cycle distortion
-
-
±250
ps
Jitter
-
-
1.4
ns
a. Measured at the line side of the transformer.
a
Table 19-27. 100BASE-TX Transmitter Characteristics (informative)
Parameter Name
Min
Nom
Max
Unit
Return loss
16
-
-
dB
Open-circuit inductance
350
-
-
µH
a. The specifications in this table are included for information only. They are mainly a function of the external transformer
and termination resistors used for measurements.
Table 19-28. 100BASE-TX Receiver Characteristics
Parameter Name
Min
Nom
Max
Unit
Signal detect assertion threshold
600
700
-
mVppd
Signal detect de-assertion threshold
350
425
-
mVppd
Differential input resistance
-
3.6
-
kΩ
Jitter tolerance (pk-pk)
4
-
-
ns
-80
-
+80
%
Signal detect assertion time
Baseline wander tracking
-
-
1000
µs
Signal detect de-assertion time
-
-
4
µs
a
Table 19-29. 10BASE-T Transmitter Characteristics
Parameter Name
Min
Nom
Max
Peak differential output signal
Harmonic content
2.2
-
2.7
V
27
-
-
dB
Link pulse width
-
100
-
ns
Start-of-idle pulse width, Last bit 0
-
300
-
ns
800
Unit
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 19-29. 10BASE-T Transmitter Characteristics (continued)
Parameter Name
Min
Nom
Max
Unit
-
350
-
ns
Start-of-idle pulse width, Last bit 1
a. The Manchester-encoded data pulses, the link pulse and the start-of-idle pulse are tested against the templates and using
the procedures found in Clause 14 of IEEE 802.3.
a
Table 19-30. 10BASE-T Transmitter Characteristics (informative)
Parameter Name
Output return loss
Min
Nom
Max
Unit
15
-
-
dB
29-17log(f/10)
-
-
dB
Peak common-mode output voltage
-
-
50
mV
Common-mode rejection
-
-
100
mV
Common-mode rejection jitter
-
-
1
ns
Output impedance balance
a. The specifications in this table are included for information only. They are mainly a function of the external transformer
and termination resistors used for measurements.
Table 19-31. 10BASE-T Receiver Characteristics
Parameter Name
Min
Nom
Max
Unit
Jitter tolerance (pk-pk)
30
26
-
ns
Input squelched threshold
340
440
540
mVppd
Differential input resistance
-
3.6
-
kΩ
25
-
-
V
Common-mode rejection
a
Table 19-32. Isolation Transformers
Name
Value
Condition
1 CT : 1 CT
+/- 5%
Open-circuit inductance
350 uH (min)
@ 10 mV, 10 kHz
Leakage inductance
0.40 uH (max)
@ 1 MHz (min)
Turns ratio
Inter-winding capacitance
25 pF (max)
DC resistance
0.9 Ohm (max)
Insertion loss
0.4 dB (typ)
0-65 MHz
1500
Vrms
HIPOT
a. Two simple 1:1 isolation transformers are required at the line interface. Transformers with integrated common-mode
chokes are recommended for exceeding FCC requirements. This table gives the recommended line transformer
characteristics.
Note:
19.17
The 100Base-TX amplitude specifications assume a transformer loss of 0.4 dB.
Current Consumption
This section provides information on typical and maximum power consumption under various
conditions. Unless otherwise indicated, current consumption numbers include use of the on-chip
LDO regulator and therefore include IDDC.
19.17.1
Nominal Power Consumption
The following table provides nominal figures for current consumption.
July 25, 2011
801
Texas Instruments-Production Data
Electrical Characteristics
Table 19-33. Nominal Power Consumption
Parameter
IDD_RUN
Parameter Name
Conditions
Nom
Unit
Run mode 1 (Flash loop)
VDD = 3.3 V
90
mA
550
µA
30
µA
44
µA
Code= while(1){} executed out of Flash
Peripherals = All ON
System Clock = 80 MHz (with PLL)
Temp = 25°C
IDD_DEEPSLEEP Deep-sleep mode
Peripherals = All OFF
System Clock = IOSC30KHZ/64
Temp = 25°C
IHIB_NORTC
Hibernate mode (external wake, VBAT = 3.0 V
a
RTC disabled, I/O not powered ) V = 0 V
DD
VDDA = 0 V
Peripherals = All OFF
System Clock = OFF
Hibernate Module = 0 kHz
IHIB_RTC
Hibernate mode (RTC enabled,
a
I/O not powered )
VBAT = 3.0 V
VDD = 0 V
VDDA = 0 V
Peripherals = All OFF
System Clock = OFF
Hibernate Module = 32 kHz
a. The VDD3ON mode must be disabled for the I/O ring to be unpowered.
19.17.2
Maximum Current Consumption
The current measurements specified in the table that follows are maximum values under the following
conditions:
■ VDD = 3.6 V
■ VDDC = 1.3 V
■ VBAT = 3.25 V
■ VDDA = 3.6 V
■ Temperature = 25°C
■ Clock source (MOSC) =3.579545-MHz crystal oscillator
Table 19-34. Detailed Current Specifications
Parameter
IDD_RUN
Parameter Name
Conditions
Max
Unit
Run mode 1 (Flash loop) VDD = 3.6 V
135
mA
Code= while(1){} executed out of Flash
Peripherals = All ON
System Clock = 80 MHz (with PLL)
Temperature = 25°C
802
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
Table 19-34. Detailed Current Specifications (continued)
Parameter
IDD_SLEEP
Parameter Name
Conditions
Max
Unit
Sleep mode
VDD = 3.6 V
46
mA
1.6
mA
Peripherals = All Clock Gated
System Clock = 80 MHz (with PLL)
Temperature = 25°C
IDD_DEEPSLEEP
Deep-Sleep mode
VDD = 3.6 V
Peripherals = All Clock Gated
System Clock = IOSC30/64
Temperature = 25°C
Table 19-35. Hibernation Detailed Current Specifications
Parameter
Parameter Name
Conditions
Max
Unit
IHIB_NORTC
Hibernate mode (external wake,
a
RTC disabled, I/O not powered )
VBAT = 3.25 V
118
µA
141
µA
VDD = 0 V
VDDA = 0 V
Peripherals = All OFF
System Clock = OFF
Hibernate Module = 0 kHz
Temperature = 25°C
IHIB_RTC
Hibernate mode (RTC enabled, I/O VBAT = 3.25 V
a
not powered )
VDD = 0 V
VDDA = 0 V
Peripherals = All OFF
System Clock = OFF
Hibernate Module = 32.768 kHz
Temperature = 25°C
a. The VDD3ON mode must be disabled for the I/O ring to be unpowered.
Table 19-36. External VDDC Source Current Specifications
Parameter
IDDC_RUN
Parameter Name
Conditions
Run mode 1 (Flash loop), VDDC VDD = 3.6 V
current
VDDC = 1.3 V
Max
Unit
98
mA
Code= while(1){} executed out of Flash
Peripherals = All ON
System Clock = 80 MHz (with PLL)
Temperature = 25°C
July 25, 2011
803
Texas Instruments-Production Data
Register Quick Reference
A
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
The Cortex-M3 Processor
R0, type R/W, , reset - (see page 55)
DATA
DATA
R1, type R/W, , reset - (see page 55)
DATA
DATA
R2, type R/W, , reset - (see page 55)
DATA
DATA
R3, type R/W, , reset - (see page 55)
DATA
DATA
R4, type R/W, , reset - (see page 55)
DATA
DATA
R5, type R/W, , reset - (see page 55)
DATA
DATA
R6, type R/W, , reset - (see page 55)
DATA
DATA
R7, type R/W, , reset - (see page 55)
DATA
DATA
R8, type R/W, , reset - (see page 55)
DATA
DATA
R9, type R/W, , reset - (see page 55)
DATA
DATA
R10, type R/W, , reset - (see page 55)
DATA
DATA
R11, type R/W, , reset - (see page 55)
DATA
DATA
R12, type R/W, , reset - (see page 55)
DATA
DATA
SP, type R/W, , reset - (see page 56)
SP
SP
LR, type R/W, , reset 0xFFFF.FFFF (see page 57)
LINK
LINK
PC, type R/W, , reset - (see page 58)
PC
PC
804
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
PSR, type R/W, , reset 0x0100.0000 (see page 59)
N
Z
C
V
Q
ICI / IT
THUMB
ICI / IT
ISRNUM
PRIMASK, type R/W, , reset 0x0000.0000 (see page 63)
PRIMASK
FAULTMASK, type R/W, , reset 0x0000.0000 (see page 64)
FAULTMASK
BASEPRI, type R/W, , reset 0x0000.0000 (see page 65)
BASEPRI
CONTROL, type R/W, , reset 0x0000.0000 (see page 66)
ASP
TMPL
INTEN
ENABLE
Cortex-M3 Peripherals
System Timer (SysTick) Registers
Base 0xE000.E000
STCTRL, type R/W, offset 0x010, reset 0x0000.0004
COUNT
CLK_SRC
STRELOAD, type R/W, offset 0x014, reset 0x0000.0000
RELOAD
RELOAD
STCURRENT, type R/WC, offset 0x018, reset 0x0000.0000
CURRENT
CURRENT
Cortex-M3 Peripherals
Nested Vectored Interrupt Controller (NVIC) Registers
Base 0xE000.E000
EN0, type R/W, offset 0x100, reset 0x0000.0000
INT
INT
EN1, type R/W, offset 0x104, reset 0x0000.0000
INT
INT
DIS0, type R/W, offset 0x180, reset 0x0000.0000
INT
INT
DIS1, type R/W, offset 0x184, reset 0x0000.0000
INT
INT
PEND0, type R/W, offset 0x200, reset 0x0000.0000
INT
INT
PEND1, type R/W, offset 0x204, reset 0x0000.0000
INT
INT
UNPEND0, type R/W, offset 0x280, reset 0x0000.0000
INT
INT
July 25, 2011
805
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
UNPEND1, type R/W, offset 0x284, reset 0x0000.0000
INT
INT
ACTIVE0, type RO, offset 0x300, reset 0x0000.0000
INT
INT
ACTIVE1, type RO, offset 0x304, reset 0x0000.0000
INT
INT
PRI0, type R/W, offset 0x400, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI1, type R/W, offset 0x404, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI2, type R/W, offset 0x408, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI3, type R/W, offset 0x40C, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI4, type R/W, offset 0x410, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI5, type R/W, offset 0x414, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI6, type R/W, offset 0x418, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI7, type R/W, offset 0x41C, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI8, type R/W, offset 0x420, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI9, type R/W, offset 0x424, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI10, type R/W, offset 0x428, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI11, type R/W, offset 0x42C, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI12, type R/W, offset 0x430, reset 0x0000.0000
INTD
INTC
INTB
INTA
PRI13, type R/W, offset 0x434, reset 0x0000.0000
INTD
INTC
INTB
INTA
806
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
SWTRIG, type WO, offset 0xF00, reset 0x0000.0000
INTID
Cortex-M3 Peripherals
System Control Block (SCB) Registers
Base 0xE000.E000
ACTLR, type R/W, offset 0x008, reset 0x0000.0000
DISFOLD DISWBUF DISMCYC
CPUID, type RO, offset 0xD00, reset 0x412F.C230
IMP
VAR
CON
PARTNO
REV
INTCTRL, type R/W, offset 0xD04, reset 0x0000.0000
NMISET
PENDSV UNPENDSV PENDSTSET PENDSTCLR
VECPEND
ISRPRE
ISRPEND
VECPEND
RETBASE
VECACT
VTABLE, type R/W, offset 0xD08, reset 0x0000.0000
BASE
OFFSET
OFFSET
APINT, type R/W, offset 0xD0C, reset 0xFA05.0000
VECTKEY
PRIGROUP
ENDIANESS
SYSRESREQ VECTCLRACT VECTRESET
SYSCTRL, type R/W, offset 0xD10, reset 0x0000.0000
SEVONPEND
SLEEPDEEP SLEEPEXIT
CFGCTRL, type R/W, offset 0xD14, reset 0x0000.0200
DIV0
STKALIGN BFHFNMIGN
UNALIGNED
MAINPEND
BASETHR
SYSPRI1, type R/W, offset 0xD18, reset 0x0000.0000
USAGE
BUS
MEM
SYSPRI2, type R/W, offset 0xD1C, reset 0x0000.0000
SVC
SYSPRI3, type R/W, offset 0xD20, reset 0x0000.0000
TICK
PENDSV
DEBUG
SYSHNDCTRL, type R/W, offset 0xD24, reset 0x0000.0000
USAGE
SVC
BUSP
MEMP
USAGEP
TICK
PNDSV
MON
SVCA
USGA
BUS
MEM
BUSA
MEMA
INVSTAT
UNDEF
DERR
IERR
FAULTSTAT, type R/W1C, offset 0xD28, reset 0x0000.0000
BFARV
BSTKE
BUSTKE
IMPRE
DIV0
UNALIGN
PRECISE
IBUS
NOCP
MMARV
MSTKE
MUSTKE
INVPC
HFAULTSTAT, type R/W1C, offset 0xD2C, reset 0x0000.0000
DBG
FORCED
VECT
MMADDR, type R/W, offset 0xD34, reset ADDR
ADDR
FAULTADDR, type R/W, offset 0xD38, reset ADDR
ADDR
July 25, 2011
807
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Cortex-M3 Peripherals
Memory Protection Unit (MPU) Registers
Base 0xE000.E000
MPUTYPE, type RO, offset 0xD90, reset 0x0000.0800
IREGION
DREGION
SEPARATE
MPUCTRL, type R/W, offset 0xD94, reset 0x0000.0000
PRIVDEFEN HFNMIENA
ENABLE
MPUNUMBER, type R/W, offset 0xD98, reset 0x0000.0000
NUMBER
MPUBASE, type R/W, offset 0xD9C, reset 0x0000.0000
ADDR
ADDR
VALID
REGION
VALID
REGION
VALID
REGION
VALID
REGION
MPUBASE1, type R/W, offset 0xDA4, reset 0x0000.0000
ADDR
ADDR
MPUBASE2, type R/W, offset 0xDAC, reset 0x0000.0000
ADDR
ADDR
MPUBASE3, type R/W, offset 0xDB4, reset 0x0000.0000
ADDR
ADDR
MPUATTR, type R/W, offset 0xDA0, reset 0x0000.0000
XN
AP
TEX
SRD
S
C
SIZE
B
ENABLE
MPUATTR1, type R/W, offset 0xDA8, reset 0x0000.0000
XN
AP
TEX
SRD
S
C
SIZE
B
ENABLE
MPUATTR2, type R/W, offset 0xDB0, reset 0x0000.0000
XN
AP
TEX
SRD
S
C
SIZE
B
ENABLE
MPUATTR3, type R/W, offset 0xDB8, reset 0x0000.0000
XN
AP
TEX
SRD
S
C
SIZE
B
ENABLE
System Control
Base 0x400F.E000
DID0, type RO, offset 0x000, reset - (see page 187)
VER
CLASS
MAJOR
MINOR
PBORCTL, type R/W, offset 0x030, reset 0x0000.0002 (see page 189)
BORIOR
RIS, type RO, offset 0x050, reset 0x0000.0000 (see page 190)
MOSCPUPRIS
PLLLRIS
BORRIS
MOSCPUPIM
PLLLIM
BORIM
IMC, type R/W, offset 0x054, reset 0x0000.0000 (see page 192)
808
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
MISC, type R/W1C, offset 0x058, reset 0x0000.0000 (see page 194)
PLLLMIS
MOSCPUPMIS
BORMIS
RESC, type R/W, offset 0x05C, reset - (see page 196)
MOSCFAIL
WDT1
SW
WDT0
BOR
POR
EXT
RCC, type R/W, offset 0x060, reset 0x0780.3AD1 (see page 198)
ACG
PWRDN
SYSDIV
BYPASS
USESYSDIV
XTAL
OSCSRC
IOSCDIS MOSCDIS
PLLCFG, type RO, offset 0x064, reset - (see page 202)
F
R
GPIOHBCTL, type R/W, offset 0x06C, reset 0x0000.0000 (see page 203)
PORTH
PORTG
PORTF
PORTE
PORTD
PORTC
PORTB
PORTA
RCC2, type R/W, offset 0x070, reset 0x07C0.6810 (see page 205)
USERCC2
DIV400
SYSDIV2
PWRDN2
SYSDIV2LSB
BYPASS2
OSCSRC2
MOSCCTL, type R/W, offset 0x07C, reset 0x0000.0000 (see page 208)
CVAL
DSLPCLKCFG, type R/W, offset 0x144, reset 0x0780.0000 (see page 209)
DSDIVORIDE
DSOSCSRC
PIOSCCAL, type R/W, offset 0x150, reset 0x0000.0000 (see page 211)
UTEN
CAL
UPDATE
UT
PIOSCSTAT, type RO, offset 0x154, reset 0x0000.0040 (see page 213)
DT
RESULT
CT
DID1, type RO, offset 0x004, reset - (see page 214)
VER
FAM
PARTNO
PINCOUNT
TEMP
PKG
ROHS
QUAL
DC0, type RO, offset 0x008, reset 0x00FF.00BF (see page 216)
SRAMSZ
FLASHSZ
DC1, type RO, offset 0x010, reset - (see page 217)
WDT1
MINSYSDIV
MAXADC1SPD
MAXADC0SPD
MPU
HIB
TEMPSNS
PLL
SSI1
SSI0
ADC1
ADC0
WDT0
SWO
SWD
JTAG
TIMER3
TIMER2
TIMER1
TIMER0
UART2
UART1
UART0
ADC0AIN1
ADC0AIN0
GPIOB
GPIOA
DC2, type RO, offset 0x014, reset 0x000F.5037 (see page 219)
I2C1
I2C0
DC3, type RO, offset 0x018, reset 0xBFFF.0000 (see page 221)
32KHZ
CCP5
CCP4
CCP3
CCP2
CCP1
CCP0
ADC0AIN7
ADC0AIN6
ADC0AIN5
ADC0AIN4
ADC0AIN3
ADC0AIN2
GPIOH
GPIOG
GPIOF
GPIOE
GPIOD
GPIOC
DC4, type RO, offset 0x01C, reset 0x0004.F0FF (see page 223)
PICAL
CCP7
CCP6
UDMA
ROM
DC5, type RO, offset 0x020, reset 0x0000.0000 (see page 225)
July 25, 2011
809
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
DC6, type RO, offset 0x024, reset 0x0000.0000 (see page 226)
DC7, type RO, offset 0x028, reset 0xFFFF.FFFF (see page 227)
DMACH30 DMACH29 DMACH28 DMACH27 DMACH26 DMACH25 DMACH24 DMACH23 DMACH22 DMACH21 DMACH20 DMACH19 DMACH18 DMACH17 DMACH16
DMACH15 DMACH14 DMACH13 DMACH12 DMACH11 DMACH10 DMACH9 DMACH8 DMACH7 DMACH6 DMACH5 DMACH4 DMACH3 DMACH2 DMACH1 DMACH0
DC8, type RO, offset 0x02C, reset 0xFFFF.FFFF (see page 231)
ADC1AIN15 ADC1AIN14 ADC1AIN13 ADC1AIN12 ADC1AIN11 ADC1AIN10 ADC1AIN9
ADC1AIN8
ADC1AIN7
ADC1AIN6
ADC1AIN5
ADC1AIN4
ADC1AIN3
ADC1AIN2
ADC1AIN1
ADC1AIN0
ADC0AIN15 ADC0AIN14 ADC0AIN13 ADC0AIN12 ADC0AIN11 ADC0AIN10 ADC0AIN9
ADC0AIN8
ADC0AIN7
ADC0AIN6
ADC0AIN5
ADC0AIN4
ADC0AIN3
ADC0AIN2
ADC0AIN1
ADC0AIN0
DC9, type RO, offset 0x190, reset 0x00FF.00FF (see page 234)
ADC1DC7 ADC1DC6 ADC1DC5 ADC1DC4 ADC1DC3 ADC1DC2 ADC1DC1 ADC1DC0
ADC0DC7 ADC0DC6 ADC0DC5 ADC0DC4 ADC0DC3 ADC0DC2 ADC0DC1 ADC0DC0
NVMSTAT, type RO, offset 0x1A0, reset 0x0000.0001 (see page 236)
FWB
RCGC0, type R/W, offset 0x100, reset 0x00000040 (see page 237)
WDT1
MAXADC1SPD
MAXADC0SPD
HIB
WDT0
MAXADC0SPD
HIB
WDT0
HIB
WDT0
ADC1
ADC0
ADC1
ADC0
ADC1
ADC0
TIMER2
TIMER1
TIMER0
UART2
UART1
UART0
TIMER2
TIMER1
TIMER0
UART2
UART1
UART0
TIMER2
TIMER1
TIMER0
UART2
UART1
UART0
SCGC0, type R/W, offset 0x110, reset 0x00000040 (see page 239)
WDT1
MAXADC1SPD
DCGC0, type R/W, offset 0x120, reset 0x00000040 (see page 241)
WDT1
RCGC1, type R/W, offset 0x104, reset 0x00000000 (see page 243)
TIMER3
I2C1
I2C0
SSI1
SSI0
SSI1
SSI0
SSI1
SSI0
SCGC1, type R/W, offset 0x114, reset 0x00000000 (see page 245)
TIMER3
I2C1
I2C0
DCGC1, type R/W, offset 0x124, reset 0x00000000 (see page 248)
TIMER3
I2C1
I2C0
RCGC2, type R/W, offset 0x108, reset 0x00000000 (see page 251)
UDMA
GPIOH
GPIOG
GPIOF
GPIOE
GPIOD
GPIOC
GPIOB
GPIOA
GPIOH
GPIOG
GPIOF
GPIOE
GPIOD
GPIOC
GPIOB
GPIOA
GPIOH
GPIOG
GPIOF
GPIOE
GPIOD
GPIOC
GPIOB
GPIOA
ADC1
ADC0
TIMER2
TIMER1
TIMER0
UART2
UART1
UART0
GPIOC
GPIOB
GPIOA
SCGC2, type R/W, offset 0x118, reset 0x00000000 (see page 253)
UDMA
DCGC2, type R/W, offset 0x128, reset 0x00000000 (see page 255)
UDMA
SRCR0, type R/W, offset 0x040, reset 0x00000000 (see page 257)
WDT1
HIB
WDT0
SRCR1, type R/W, offset 0x044, reset 0x00000000 (see page 259)
TIMER3
I2C1
I2C0
SSI1
SSI0
GPIOF
GPIOE
SRCR2, type R/W, offset 0x048, reset 0x00000000 (see page 261)
UDMA
GPIOH
GPIOG
810
GPIOD
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
HIBREQ
RTCEN
Hibernation Module
Base 0x400F.C000
HIBRTCC, type RO, offset 0x000, reset 0x0000.0000 (see page 274)
RTCC
RTCC
HIBRTCM0, type R/W, offset 0x004, reset 0xFFFF.FFFF (see page 275)
RTCM0
RTCM0
HIBRTCM1, type R/W, offset 0x008, reset 0xFFFF.FFFF (see page 276)
RTCM1
RTCM1
HIBRTCLD, type R/W, offset 0x00C, reset 0xFFFF.FFFF (see page 277)
RTCLD
RTCLD
HIBCTL, type R/W, offset 0x010, reset 0x8000.0000 (see page 278)
WRC
VDD3ON VABORT CLK32EN LOWBATEN PINWEN RTCWEN CLKSEL
HIBIM, type R/W, offset 0x014, reset 0x0000.0000 (see page 281)
EXTW
LOWBAT RTCALT1 RTCALT0
EXTW
LOWBAT RTCALT1 RTCALT0
EXTW
LOWBAT RTCALT1 RTCALT0
EXTW
LOWBAT RTCALT1 RTCALT0
HIBRIS, type RO, offset 0x018, reset 0x0000.0000 (see page 283)
HIBMIS, type RO, offset 0x01C, reset 0x0000.0000 (see page 285)
HIBIC, type R/W1C, offset 0x020, reset 0x0000.0000 (see page 287)
HIBRTCT, type R/W, offset 0x024, reset 0x0000.7FFF (see page 288)
TRIM
HIBDATA, type R/W, offset 0x030-0x12C, reset - (see page 289)
RTD
RTD
Internal Memory
Flash Memory Registers (Flash Control Offset)
Base 0x400F.D000
FMA, type R/W, offset 0x000, reset 0x0000.0000
OFFSET
OFFSET
FMD, type R/W, offset 0x004, reset 0x0000.0000
DATA
DATA
FMC, type R/W, offset 0x008, reset 0x0000.0000
WRKEY
COMT
MERASE
ERASE
WRITE
PRIS
ARIS
FCRIS, type RO, offset 0x00C, reset 0x0000.0000
July 25, 2011
811
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
PMASK
AMASK
PMISC
AMISC
FCIM, type R/W, offset 0x010, reset 0x0000.0000
FCMISC, type R/W1C, offset 0x014, reset 0x0000.0000
FMC2, type R/W, offset 0x020, reset 0x0000.0000
WRKEY
WRBUF
FWBVAL, type R/W, offset 0x030, reset 0x0000.0000
FWB[n]
FWB[n]
FCTL, type R/W, offset 0x0F8, reset 0x0000.0000
USDACK USDREQ
FWBn, type R/W, offset 0x100 - 0x17C, reset 0x0000.0000
DATA
DATA
Internal Memory
Memory Registers (System Control Offset)
Base 0x400F.E000
RMCTL, type R/W1C, offset 0x0F0, reset -
BA
FMPRE0, type R/W, offset 0x130 and 0x200, reset 0xFFFF.FFFF
READ_ENABLE
READ_ENABLE
FMPPE0, type R/W, offset 0x134 and 0x400, reset 0xFFFF.FFFF
PROG_ENABLE
PROG_ENABLE
BOOTCFG, type R/W, offset 0x1D0, reset 0xFFFF.FFFE
NW
PORT
PIN
POL
EN
DBG1
DBG0
USER_REG0, type R/W, offset 0x1E0, reset 0xFFFF.FFFF
NW
DATA
DATA
USER_REG1, type R/W, offset 0x1E4, reset 0xFFFF.FFFF
NW
DATA
DATA
USER_REG2, type R/W, offset 0x1E8, reset 0xFFFF.FFFF
NW
DATA
DATA
USER_REG3, type R/W, offset 0x1EC, reset 0xFFFF.FFFF
NW
DATA
DATA
FMPRE1, type R/W, offset 0x204, reset 0xFFFF.FFFF
READ_ENABLE
READ_ENABLE
FMPRE2, type R/W, offset 0x208, reset 0xFFFF.FFFF
READ_ENABLE
READ_ENABLE
812
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
FMPRE3, type R/W, offset 0x20C, reset 0xFFFF.FFFF
READ_ENABLE
READ_ENABLE
FMPRE4, type R/W, offset 0x210, reset 0xFFFF.FFFF
READ_ENABLE
READ_ENABLE
FMPRE5, type R/W, offset 0x214, reset 0xFFFF.FFFF
READ_ENABLE
READ_ENABLE
FMPRE6, type R/W, offset 0x218, reset 0x0000.0000
READ_ENABLE
READ_ENABLE
FMPRE7, type R/W, offset 0x21C, reset 0x0000.0000
READ_ENABLE
READ_ENABLE
FMPPE1, type R/W, offset 0x404, reset 0xFFFF.FFFF
PROG_ENABLE
PROG_ENABLE
FMPPE2, type R/W, offset 0x408, reset 0xFFFF.FFFF
PROG_ENABLE
PROG_ENABLE
FMPPE3, type R/W, offset 0x40C, reset 0xFFFF.FFFF
PROG_ENABLE
PROG_ENABLE
FMPPE4, type R/W, offset 0x410, reset 0xFFFF.FFFF
PROG_ENABLE
PROG_ENABLE
FMPPE5, type R/W, offset 0x414, reset 0xFFFF.FFFF
PROG_ENABLE
PROG_ENABLE
FMPPE6, type R/W, offset 0x418, reset 0x0000.0000
PROG_ENABLE
PROG_ENABLE
FMPPE7, type R/W, offset 0x41C, reset 0x0000.0000
PROG_ENABLE
PROG_ENABLE
Micro Direct Memory Access (μDMA)
μDMA Channel Control Structure (Offset from Channel Control Table Base)
Base n/a
DMASRCENDP, type R/W, offset 0x000, reset ADDR
ADDR
DMADSTENDP, type R/W, offset 0x004, reset ADDR
ADDR
DMACHCTL, type R/W, offset 0x008, reset DSTINC
ARBSIZE
DSTSIZE
SRCINC
SRCSIZE
XFERSIZE
July 25, 2011
ARBSIZE
NXTUSEBURST
XFERMODE
813
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Micro Direct Memory Access (μDMA)
μDMA Registers (Offset from μDMA Base Address)
Base 0x400F.F000
DMASTAT, type RO, offset 0x000, reset 0x001F.0000
DMACHANS
STATE
MASTEN
DMACFG, type WO, offset 0x004, reset -
MASTEN
DMACTLBASE, type R/W, offset 0x008, reset 0x0000.0000
ADDR
ADDR
DMAALTBASE, type RO, offset 0x00C, reset 0x0000.0200
ADDR
ADDR
DMAWAITSTAT, type RO, offset 0x010, reset 0xFFFF.FFC0
WAITREQ[n]
WAITREQ[n]
DMASWREQ, type WO, offset 0x014, reset SWREQ[n]
SWREQ[n]
DMAUSEBURSTSET, type R/W, offset 0x018, reset 0x0000.0000
SET[n]
SET[n]
DMAUSEBURSTCLR, type WO, offset 0x01C, reset CLR[n]
CLR[n]
DMAREQMASKSET, type R/W, offset 0x020, reset 0x0000.0000
SET[n]
SET[n]
DMAREQMASKCLR, type WO, offset 0x024, reset CLR[n]
CLR[n]
DMAENASET, type R/W, offset 0x028, reset 0x0000.0000
SET[n]
SET[n]
DMAENACLR, type WO, offset 0x02C, reset CLR[n]
CLR[n]
DMAALTSET, type R/W, offset 0x030, reset 0x0000.0000
SET[n]
SET[n]
DMAALTCLR, type WO, offset 0x034, reset CLR[n]
CLR[n]
DMAPRIOSET, type R/W, offset 0x038, reset 0x0000.0000
SET[n]
SET[n]
DMAPRIOCLR, type WO, offset 0x03C, reset CLR[n]
CLR[n]
814
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
DMAERRCLR, type R/W, offset 0x04C, reset 0x0000.0000
ERRCLR
DMACHASGN, type R/W, offset 0x500, reset 0x0000.0000
CHASGN[n]
CHASGN[n]
DMACHIS, type R/W1C, offset 0x504, reset 0x0000.0000
CHIS[n]
CHIS[n]
DMAPeriphID0, type RO, offset 0xFE0, reset 0x0000.0030
PID0
DMAPeriphID1, type RO, offset 0xFE4, reset 0x0000.00B2
PID1
DMAPeriphID2, type RO, offset 0xFE8, reset 0x0000.000B
PID2
DMAPeriphID3, type RO, offset 0xFEC, reset 0x0000.0000
PID3
DMAPeriphID4, type RO, offset 0xFD0, reset 0x0000.0004
PID4
DMAPCellID0, type RO, offset 0xFF0, reset 0x0000.000D
CID0
DMAPCellID1, type RO, offset 0xFF4, reset 0x0000.00F0
CID1
DMAPCellID2, type RO, offset 0xFF8, reset 0x0000.0005
CID2
DMAPCellID3, type RO, offset 0xFFC, reset 0x0000.00B1
CID3
General-Purpose Input/Outputs (GPIOs)
GPIO Port A (APB) base: 0x4000.4000
GPIO Port A (AHB) base: 0x4005.8000
GPIO Port B (APB) base: 0x4000.5000
GPIO Port B (AHB) base: 0x4005.9000
GPIO Port C (APB) base: 0x4000.6000
GPIO Port C (AHB) base: 0x4005.A000
GPIO Port D (APB) base: 0x4000.7000
GPIO Port D (AHB) base: 0x4005.B000
GPIO Port E (APB) base: 0x4002.4000
GPIO Port E (AHB) base: 0x4005.C000
GPIO Port F (APB) base: 0x4002.5000
GPIO Port F (AHB) base: 0x4005.D000
GPIO Port G (APB) base: 0x4002.6000
GPIO Port G (AHB) base: 0x4005.E000
GPIO Port H (APB) base: 0x4002.7000
GPIO Port H (AHB) base: 0x4005.F000
GPIODATA, type R/W, offset 0x000, reset 0x0000.0000 (see page 408)
DATA
July 25, 2011
815
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
GPIODIR, type R/W, offset 0x400, reset 0x0000.0000 (see page 409)
DIR
GPIOIS, type R/W, offset 0x404, reset 0x0000.0000 (see page 410)
IS
GPIOIBE, type R/W, offset 0x408, reset 0x0000.0000 (see page 411)
IBE
GPIOIEV, type R/W, offset 0x40C, reset 0x0000.0000 (see page 412)
IEV
GPIOIM, type R/W, offset 0x410, reset 0x0000.0000 (see page 413)
IME
GPIORIS, type RO, offset 0x414, reset 0x0000.0000 (see page 414)
RIS
GPIOMIS, type RO, offset 0x418, reset 0x0000.0000 (see page 415)
MIS
GPIOICR, type W1C, offset 0x41C, reset 0x0000.0000 (see page 417)
IC
GPIOAFSEL, type R/W, offset 0x420, reset - (see page 418)
AFSEL
GPIODR2R, type R/W, offset 0x500, reset 0x0000.00FF (see page 420)
DRV2
GPIODR4R, type R/W, offset 0x504, reset 0x0000.0000 (see page 421)
DRV4
GPIODR8R, type R/W, offset 0x508, reset 0x0000.0000 (see page 422)
DRV8
GPIOODR, type R/W, offset 0x50C, reset 0x0000.0000 (see page 423)
ODE
GPIOPUR, type R/W, offset 0x510, reset - (see page 424)
PUE
GPIOPDR, type R/W, offset 0x514, reset 0x0000.0000 (see page 426)
PDE
GPIOSLR, type R/W, offset 0x518, reset 0x0000.0000 (see page 428)
SRL
GPIODEN, type R/W, offset 0x51C, reset - (see page 429)
DEN
816
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
GPIOLOCK, type R/W, offset 0x520, reset 0x0000.0001 (see page 431)
LOCK
LOCK
GPIOCR, type -, offset 0x524, reset - (see page 432)
CR
GPIOAMSEL, type R/W, offset 0x528, reset 0x0000.0000 (see page 434)
GPIOAMSEL
GPIOPCTL, type R/W, offset 0x52C, reset - (see page 435)
PMC7
PMC6
PMC5
PMC4
PMC3
PMC2
PMC1
PMC0
GPIOPeriphID4, type RO, offset 0xFD0, reset 0x0000.0000 (see page 437)
PID4
GPIOPeriphID5, type RO, offset 0xFD4, reset 0x0000.0000 (see page 438)
PID5
GPIOPeriphID6, type RO, offset 0xFD8, reset 0x0000.0000 (see page 439)
PID6
GPIOPeriphID7, type RO, offset 0xFDC, reset 0x0000.0000 (see page 440)
PID7
GPIOPeriphID0, type RO, offset 0xFE0, reset 0x0000.0061 (see page 441)
PID0
GPIOPeriphID1, type RO, offset 0xFE4, reset 0x0000.0000 (see page 442)
PID1
GPIOPeriphID2, type RO, offset 0xFE8, reset 0x0000.0018 (see page 443)
PID2
GPIOPeriphID3, type RO, offset 0xFEC, reset 0x0000.0001 (see page 444)
PID3
GPIOPCellID0, type RO, offset 0xFF0, reset 0x0000.000D (see page 445)
CID0
GPIOPCellID1, type RO, offset 0xFF4, reset 0x0000.00F0 (see page 446)
CID1
GPIOPCellID2, type RO, offset 0xFF8, reset 0x0000.0005 (see page 447)
CID2
GPIOPCellID3, type RO, offset 0xFFC, reset 0x0000.00B1 (see page 448)
CID3
July 25, 2011
817
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
General-Purpose Timers
Timer 0 base: 0x4003.0000
Timer 1 base: 0x4003.1000
Timer 2 base: 0x4003.2000
Timer 3 base: 0x4003.3000
GPTMCFG, type R/W, offset 0x000, reset 0x0000.0000 (see page 465)
GPTMCFG
GPTMTAMR, type R/W, offset 0x004, reset 0x0000.0000 (see page 466)
TASNAPS
TAWOT
TAMIE
TACDIR
TAAMS
TACMR
TAMR
TBSNAPS
TBWOT
TBMIE
TBCDIR
TBAMS
TBCMR
TBMR
TAPWML
TAOTE
RTCEN
GPTMTBMR, type R/W, offset 0x008, reset 0x0000.0000 (see page 468)
GPTMCTL, type R/W, offset 0x00C, reset 0x0000.0000 (see page 470)
TBPWML
TBOTE
TBEVENT
TBSTALL
TBEN
TAEVENT
TASTALL
TAEN
GPTMIMR, type R/W, offset 0x018, reset 0x0000.0000 (see page 473)
TBMIM
CBEIM
CBMIM
TBTOIM
TAMIM
RTCIM
CAEIM
CAMIM
TATOIM
CBMRIS TBTORIS
TAMRIS
RTCRIS
CAERIS
CAMRIS
TATORIS
TAMMIS
RTCMIS
CAEMIS
CAMMIS TATOMIS
GPTMRIS, type RO, offset 0x01C, reset 0x0000.0000 (see page 475)
TBMRIS
CBERIS
GPTMMIS, type RO, offset 0x020, reset 0x0000.0000 (see page 478)
TBMMIS
CBEMIS
CBMMIS TBTOMIS
GPTMICR, type W1C, offset 0x024, reset 0x0000.0000 (see page 481)
TBMCINT CBECINT CBMCINT TBTOCINT
TAMCINT RTCCINT CAECINT CAMCINT TATOCINT
GPTMTAILR, type R/W, offset 0x028, reset 0xFFFF.FFFF (see page 483)
TAILR
TAILR
GPTMTBILR, type R/W, offset 0x02C, reset 0x0000.FFFF (see page 484)
TBILR
TBILR
GPTMTAMATCHR, type R/W, offset 0x030, reset 0xFFFF.FFFF (see page 485)
TAMR
TAMR
GPTMTBMATCHR, type R/W, offset 0x034, reset 0x0000.FFFF (see page 486)
TBMR
TBMR
GPTMTAPR, type R/W, offset 0x038, reset 0x0000.0000 (see page 487)
TAPSR
GPTMTBPR, type R/W, offset 0x03C, reset 0x0000.0000 (see page 488)
TBPSR
GPTMTAPMR, type R/W, offset 0x040, reset 0x0000.0000 (see page 489)
TAPSMR
GPTMTBPMR, type R/W, offset 0x044, reset 0x0000.0000 (see page 490)
TBPSMR
818
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RESEN
INTEN
GPTMTAR, type RO, offset 0x048, reset 0xFFFF.FFFF (see page 491)
TAR
TAR
GPTMTBR, type RO, offset 0x04C, reset 0x0000.FFFF (see page 492)
TBR
TBR
GPTMTAV, type RW, offset 0x050, reset 0xFFFF.FFFF (see page 493)
TAV
TAV
GPTMTBV, type RW, offset 0x054, reset 0x0000.FFFF (see page 494)
TBV
TBV
Watchdog Timers
WDT0 base: 0x4000.0000
WDT1 base: 0x4000.1000
WDTLOAD, type R/W, offset 0x000, reset 0xFFFF.FFFF (see page 499)
WDTLOAD
WDTLOAD
WDTVALUE, type RO, offset 0x004, reset 0xFFFF.FFFF (see page 500)
WDTVALUE
WDTVALUE
WDTCTL, type R/W, offset 0x008, reset 0x0000.0000 (WDT0) and 0x8000.0000 (WDT1) (see page 501)
WRC
WDTICR, type WO, offset 0x00C, reset - (see page 503)
WDTINTCLR
WDTINTCLR
WDTRIS, type RO, offset 0x010, reset 0x0000.0000 (see page 504)
WDTRIS
WDTMIS, type RO, offset 0x014, reset 0x0000.0000 (see page 505)
WDTMIS
WDTTEST, type R/W, offset 0x418, reset 0x0000.0000 (see page 506)
STALL
WDTLOCK, type R/W, offset 0xC00, reset 0x0000.0000 (see page 507)
WDTLOCK
WDTLOCK
WDTPeriphID4, type RO, offset 0xFD0, reset 0x0000.0000 (see page 508)
PID4
WDTPeriphID5, type RO, offset 0xFD4, reset 0x0000.0000 (see page 509)
PID5
WDTPeriphID6, type RO, offset 0xFD8, reset 0x0000.0000 (see page 510)
PID6
WDTPeriphID7, type RO, offset 0xFDC, reset 0x0000.0000 (see page 511)
PID7
July 25, 2011
819
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
ASEN3
ASEN2
ASEN1
ASEN0
INR3
INR2
INR1
WDTPeriphID0, type RO, offset 0xFE0, reset 0x0000.0005 (see page 512)
PID0
WDTPeriphID1, type RO, offset 0xFE4, reset 0x0000.0018 (see page 513)
PID1
WDTPeriphID2, type RO, offset 0xFE8, reset 0x0000.0018 (see page 514)
PID2
WDTPeriphID3, type RO, offset 0xFEC, reset 0x0000.0001 (see page 515)
PID3
WDTPCellID0, type RO, offset 0xFF0, reset 0x0000.000D (see page 516)
CID0
WDTPCellID1, type RO, offset 0xFF4, reset 0x0000.00F0 (see page 517)
CID1
WDTPCellID2, type RO, offset 0xFF8, reset 0x0000.0006 (see page 518)
CID2
WDTPCellID3, type RO, offset 0xFFC, reset 0x0000.00B1 (see page 519)
CID3
Analog-to-Digital Converter (ADC)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
ADCACTSS, type R/W, offset 0x000, reset 0x0000.0000 (see page 542)
ADCRIS, type RO, offset 0x004, reset 0x0000.0000 (see page 543)
INRDC
INR0
ADCIM, type R/W, offset 0x008, reset 0x0000.0000 (see page 545)
DCONSS3 DCONSS2 DCONSS1 DCONSS0
MASK3
MASK2
MASK1
MASK0
ADCISC, type R/W1C, offset 0x00C, reset 0x0000.0000 (see page 547)
DCINSS3 DCINSS2 DCINSS1 DCINSS0
IN3
IN2
IN1
IN0
OV3
OV2
OV1
OV0
UV1
UV0
ADCOSTAT, type R/W1C, offset 0x010, reset 0x0000.0000 (see page 550)
ADCEMUX, type R/W, offset 0x014, reset 0x0000.0000 (see page 552)
EM3
EM2
EM1
EM0
ADCUSTAT, type R/W1C, offset 0x018, reset 0x0000.0000 (see page 556)
UV3
UV2
ADCSSPRI, type R/W, offset 0x020, reset 0x0000.3210 (see page 557)
SS3
SS2
820
SS1
SS0
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
SS1
SS0
ADCSPC, type R/W, offset 0x024, reset 0x0000.0000 (see page 559)
PHASE
ADCPSSI, type R/W, offset 0x028, reset - (see page 561)
GSYNC
SYNCWAIT
SS3
SS2
ADCSAC, type R/W, offset 0x030, reset 0x0000.0000 (see page 563)
AVG
ADCDCISC, type R/W1C, offset 0x034, reset 0x0000.0000 (see page 564)
DCINT7
DCINT6
DCINT5
DCINT4
DCINT3
DCINT2
DCINT1
DCINT0
ADCCTL, type R/W, offset 0x038, reset 0x0000.0000 (see page 566)
RES
VREF
ADCSSMUX0, type R/W, offset 0x040, reset 0x0000.0000 (see page 567)
MUX7
MUX6
MUX5
MUX4
MUX3
MUX2
MUX1
MUX0
ADCSSCTL0, type R/W, offset 0x044, reset 0x0000.0000 (see page 569)
TS7
IE7
END7
D7
TS6
IE6
END6
D6
TS5
IE5
END5
D5
TS4
IE4
END4
D4
TS3
IE3
END3
D3
TS2
IE2
END2
D2
TS1
IE1
END1
D1
TS0
IE0
END0
D0
ADCSSFIFO0, type RO, offset 0x048, reset - (see page 572)
DATA
ADCSSFIFO1, type RO, offset 0x068, reset - (see page 572)
DATA
ADCSSFIFO2, type RO, offset 0x088, reset - (see page 572)
DATA
ADCSSFIFO3, type RO, offset 0x0A8, reset - (see page 572)
DATA
ADCSSFSTAT0, type RO, offset 0x04C, reset 0x0000.0100 (see page 573)
FULL
EMPTY
HPTR
TPTR
EMPTY
HPTR
TPTR
EMPTY
HPTR
TPTR
EMPTY
HPTR
TPTR
ADCSSFSTAT1, type RO, offset 0x06C, reset 0x0000.0100 (see page 573)
FULL
ADCSSFSTAT2, type RO, offset 0x08C, reset 0x0000.0100 (see page 573)
FULL
ADCSSFSTAT3, type RO, offset 0x0AC, reset 0x0000.0100 (see page 573)
FULL
ADCSSOP0, type R/W, offset 0x050, reset 0x0000.0000 (see page 575)
S7DCOP
S6DCOP
S5DCOP
S4DCOP
S3DCOP
S2DCOP
S1DCOP
S0DCOP
ADCSSDC0, type R/W, offset 0x054, reset 0x0000.0000 (see page 577)
S7DCSEL
S6DCSEL
S5DCSEL
S4DCSEL
S3DCSEL
S2DCSEL
S1DCSEL
S0DCSEL
July 25, 2011
821
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
ADCSSMUX1, type R/W, offset 0x060, reset 0x0000.0000 (see page 579)
MUX3
MUX2
MUX1
MUX0
MUX1
MUX0
ADCSSMUX2, type R/W, offset 0x080, reset 0x0000.0000 (see page 579)
MUX3
MUX2
ADCSSCTL1, type R/W, offset 0x064, reset 0x0000.0000 (see page 580)
TS3
IE3
END3
D3
TS2
IE2
END2
D2
TS1
IE1
END1
D1
TS0
IE0
END0
D0
D2
TS1
IE1
END1
D1
TS0
IE0
END0
D0
ADCSSCTL2, type R/W, offset 0x084, reset 0x0000.0000 (see page 580)
TS3
IE3
END3
D3
TS2
IE2
END2
ADCSSOP1, type R/W, offset 0x070, reset 0x0000.0000 (see page 582)
S3DCOP
S2DCOP
S1DCOP
S0DCOP
S2DCOP
S1DCOP
S0DCOP
ADCSSOP2, type R/W, offset 0x090, reset 0x0000.0000 (see page 582)
S3DCOP
ADCSSDC1, type R/W, offset 0x074, reset 0x0000.0000 (see page 583)
S3DCSEL
S2DCSEL
S1DCSEL
S0DCSEL
S1DCSEL
S0DCSEL
ADCSSDC2, type R/W, offset 0x094, reset 0x0000.0000 (see page 583)
S3DCSEL
S2DCSEL
ADCSSMUX3, type R/W, offset 0x0A0, reset 0x0000.0000 (see page 585)
MUX0
ADCSSCTL3, type R/W, offset 0x0A4, reset 0x0000.0002 (see page 586)
TS0
IE0
END0
D0
ADCSSOP3, type R/W, offset 0x0B0, reset 0x0000.0000 (see page 587)
S0DCOP
ADCSSDC3, type R/W, offset 0x0B4, reset 0x0000.0000 (see page 588)
S0DCSEL
ADCDCRIC, type R/W, offset 0xD00, reset 0x0000.0000 (see page 589)
DCTRIG7 DCTRIG6 DCTRIG5 DCTRIG4 DCTRIG3 DCTRIG2 DCTRIG1 DCTRIG0
DCINT7
DCINT6
DCINT5
DCINT4
DCINT3
DCINT2
DCINT1
DCINT0
ADCDCCTL0, type R/W, offset 0xE00, reset 0x0000.0000 (see page 594)
CIE
CIC
CIM
CIE
CIC
CIM
CIE
CIC
CIM
CIE
CIC
CIM
ADCDCCTL1, type R/W, offset 0xE04, reset 0x0000.0000 (see page 594)
ADCDCCTL2, type R/W, offset 0xE08, reset 0x0000.0000 (see page 594)
ADCDCCTL3, type R/W, offset 0xE0C, reset 0x0000.0000 (see page 594)
822
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
ADCDCCTL4, type R/W, offset 0xE10, reset 0x0000.0000 (see page 594)
CIE
CIC
CIM
CIE
CIC
CIM
CIE
CIC
CIM
CIE
CIC
CIM
ADCDCCTL5, type R/W, offset 0xE14, reset 0x0000.0000 (see page 594)
ADCDCCTL6, type R/W, offset 0xE18, reset 0x0000.0000 (see page 594)
ADCDCCTL7, type R/W, offset 0xE1C, reset 0x0000.0000 (see page 594)
ADCDCCMP0, type R/W, offset 0xE40, reset 0x0000.0000 (see page 596)
COMP1
COMP0
ADCDCCMP1, type R/W, offset 0xE44, reset 0x0000.0000 (see page 596)
COMP1
COMP0
ADCDCCMP2, type R/W, offset 0xE48, reset 0x0000.0000 (see page 596)
COMP1
COMP0
ADCDCCMP3, type R/W, offset 0xE4C, reset 0x0000.0000 (see page 596)
COMP1
COMP0
ADCDCCMP4, type R/W, offset 0xE50, reset 0x0000.0000 (see page 596)
COMP1
COMP0
ADCDCCMP5, type R/W, offset 0xE54, reset 0x0000.0000 (see page 596)
COMP1
COMP0
ADCDCCMP6, type R/W, offset 0xE58, reset 0x0000.0000 (see page 596)
COMP1
COMP0
ADCDCCMP7, type R/W, offset 0xE5C, reset 0x0000.0000 (see page 596)
COMP1
COMP0
Universal Asynchronous Receivers/Transmitters (UARTs)
UART0 base: 0x4000.C000
UART1 base: 0x4000.D000
UART2 base: 0x4000.E000
UARTDR, type R/W, offset 0x000, reset 0x0000.0000 (see page 612)
OE
BE
PE
FE
DATA
UARTRSR/UARTECR, type RO, offset 0x004, reset 0x0000.0000 (Read-Only Status Register) (see page 614)
OE
BE
PE
FE
BUSY
DCD
DSR
CTS
UARTRSR/UARTECR, type WO, offset 0x004, reset 0x0000.0000 (Write-Only Error Clear Register) (see page 614)
DATA
UARTFR, type RO, offset 0x018, reset 0x0000.0090 (see page 617)
RI
TXFE
RXFF
TXFF
July 25, 2011
RXFE
823
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
UARTILPR, type R/W, offset 0x020, reset 0x0000.0000 (see page 620)
ILPDVSR
UARTIBRD, type R/W, offset 0x024, reset 0x0000.0000 (see page 621)
DIVINT
UARTFBRD, type R/W, offset 0x028, reset 0x0000.0000 (see page 622)
DIVFRAC
UARTLCRH, type R/W, offset 0x02C, reset 0x0000.0000 (see page 623)
SPS
WLEN
FEN
STP2
EPS
PEN
BRK
EOT
SMART
SIRLP
SIREN
UARTEN
UARTCTL, type R/W, offset 0x030, reset 0x0000.0300 (see page 625)
CTSEN
RTSEN
RTS
DTR
RXE
TXE
LBE
LIN
HSE
UARTIFLS, type R/W, offset 0x034, reset 0x0000.0012 (see page 629)
RXIFLSEL
TXIFLSEL
UARTIM, type R/W, offset 0x038, reset 0x0000.0000 (see page 631)
LME5IM
LME1IM
LMSBIM
OEIM
BEIM
PEIM
FEIM
RTIM
TXIM
RXIM
DSRIM
DCDIM
CTSIM
RIIM
PERIS
FERIS
RTRIS
TXRIS
RXRIS
DSRRIS
DCDRIS
CTSRIS
RIRIS
PEMIS
FEMIS
RTMIS
TXMIS
RXMIS
DSRMIS
DCDMIS
CTSMIS
RIMIS
PEIC
FEIC
RTIC
TXIC
RXIC
DSRMIC
DCDMIC
CTSMIC
RIMIC
UARTRIS, type RO, offset 0x03C, reset 0x0000.000F (see page 635)
LME5RIS LME1RIS LMSBRIS
OERIS
BERIS
UARTMIS, type RO, offset 0x040, reset 0x0000.0000 (see page 638)
LME5MIS LME1MIS LMSBMIS
OEMIS
BEMIS
UARTICR, type W1C, offset 0x044, reset 0x0000.0000 (see page 641)
LME5IC
LME1IC
LMSBIC
OEIC
BEIC
UARTDMACTL, type R/W, offset 0x048, reset 0x0000.0000 (see page 643)
DMAERR TXDMAE RXDMAE
UARTLCTL, type R/W, offset 0x090, reset 0x0000.0000 (see page 644)
BLEN
MASTER
UARTLSS, type RO, offset 0x094, reset 0x0000.0000 (see page 645)
TSS
UARTLTIM, type RO, offset 0x098, reset 0x0000.0000 (see page 646)
TIMER
UARTPeriphID4, type RO, offset 0xFD0, reset 0x0000.0000 (see page 647)
PID4
UARTPeriphID5, type RO, offset 0xFD4, reset 0x0000.0000 (see page 648)
PID5
UARTPeriphID6, type RO, offset 0xFD8, reset 0x0000.0000 (see page 649)
PID6
824
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
UARTPeriphID7, type RO, offset 0xFDC, reset 0x0000.0000 (see page 650)
PID7
UARTPeriphID0, type RO, offset 0xFE0, reset 0x0000.0060 (see page 651)
PID0
UARTPeriphID1, type RO, offset 0xFE4, reset 0x0000.0000 (see page 652)
PID1
UARTPeriphID2, type RO, offset 0xFE8, reset 0x0000.0018 (see page 653)
PID2
UARTPeriphID3, type RO, offset 0xFEC, reset 0x0000.0001 (see page 654)
PID3
UARTPCellID0, type RO, offset 0xFF0, reset 0x0000.000D (see page 655)
CID0
UARTPCellID1, type RO, offset 0xFF4, reset 0x0000.00F0 (see page 656)
CID1
UARTPCellID2, type RO, offset 0xFF8, reset 0x0000.0005 (see page 657)
CID2
UARTPCellID3, type RO, offset 0xFFC, reset 0x0000.00B1 (see page 658)
CID3
Synchronous Serial Interface (SSI)
SSI0 base: 0x4000.8000
SSI1 base: 0x4000.9000
SSICR0, type R/W, offset 0x000, reset 0x0000.0000 (see page 674)
SCR
SPH
SPO
FRF
DSS
SSICR1, type R/W, offset 0x004, reset 0x0000.0000 (see page 676)
EOT
SOD
MS
SSE
LBM
BSY
RFF
RNE
TNF
TFE
TXIM
RXIM
RTIM
RORIM
TXRIS
RXRIS
RTRIS
RORRIS
SSIDR, type R/W, offset 0x008, reset 0x0000.0000 (see page 678)
DATA
SSISR, type RO, offset 0x00C, reset 0x0000.0003 (see page 679)
SSICPSR, type R/W, offset 0x010, reset 0x0000.0000 (see page 681)
CPSDVSR
SSIIM, type R/W, offset 0x014, reset 0x0000.0000 (see page 682)
SSIRIS, type RO, offset 0x018, reset 0x0000.0008 (see page 683)
July 25, 2011
825
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
TXMIS
RXMIS
RTMIS
RORMIS
RTIC
RORIC
SSIMIS, type RO, offset 0x01C, reset 0x0000.0000 (see page 685)
SSIICR, type W1C, offset 0x020, reset 0x0000.0000 (see page 687)
SSIDMACTL, type R/W, offset 0x024, reset 0x0000.0000 (see page 688)
TXDMAE RXDMAE
SSIPeriphID4, type RO, offset 0xFD0, reset 0x0000.0000 (see page 689)
PID4
SSIPeriphID5, type RO, offset 0xFD4, reset 0x0000.0000 (see page 690)
PID5
SSIPeriphID6, type RO, offset 0xFD8, reset 0x0000.0000 (see page 691)
PID6
SSIPeriphID7, type RO, offset 0xFDC, reset 0x0000.0000 (see page 692)
PID7
SSIPeriphID0, type RO, offset 0xFE0, reset 0x0000.0022 (see page 693)
PID0
SSIPeriphID1, type RO, offset 0xFE4, reset 0x0000.0000 (see page 694)
PID1
SSIPeriphID2, type RO, offset 0xFE8, reset 0x0000.0018 (see page 695)
PID2
SSIPeriphID3, type RO, offset 0xFEC, reset 0x0000.0001 (see page 696)
PID3
SSIPCellID0, type RO, offset 0xFF0, reset 0x0000.000D (see page 697)
CID0
SSIPCellID1, type RO, offset 0xFF4, reset 0x0000.00F0 (see page 698)
CID1
SSIPCellID2, type RO, offset 0xFF8, reset 0x0000.0005 (see page 699)
CID2
SSIPCellID3, type RO, offset 0xFFC, reset 0x0000.00B1 (see page 700)
CID3
Inter-Integrated Circuit
(I2C)
Interface
I2C Master
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
I2CMSA, type R/W, offset 0x000, reset 0x0000.0000
SA
826
R/S
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
BUSBSY
IDLE
ARBLST
DATACK
ADRACK
ERROR
BUSY
ACK
STOP
START
RUN
I2CMCS, type RO, offset 0x004, reset 0x0000.0000 (Read-Only Status Register)
I2CMCS, type WO, offset 0x004, reset 0x0000.0000 (Write-Only Control Register)
I2CMDR, type R/W, offset 0x008, reset 0x0000.0000
DATA
I2CMTPR, type R/W, offset 0x00C, reset 0x0000.0001
TPR
I2CMIMR, type R/W, offset 0x010, reset 0x0000.0000
IM
I2CMRIS, type RO, offset 0x014, reset 0x0000.0000
RIS
I2CMMIS, type RO, offset 0x018, reset 0x0000.0000
MIS
I2CMICR, type WO, offset 0x01C, reset 0x0000.0000
IC
I2CMCR, type R/W, offset 0x020, reset 0x0000.0000
SFE
MFE
LPBK
Inter-Integrated Circuit (I2C) Interface
I2C Slave
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
I2CSOAR, type R/W, offset 0x800, reset 0x0000.0000
OAR
I2CSCSR, type RO, offset 0x804, reset 0x0000.0000 (Read-Only Status Register)
FBR
TREQ
RREQ
I2CSCSR, type WO, offset 0x804, reset 0x0000.0000 (Write-Only Control Register)
DA
I2CSDR, type R/W, offset 0x808, reset 0x0000.0000
DATA
I2CSIMR, type R/W, offset 0x80C, reset 0x0000.0000
STOPIM
STARTIM
DATAIM
I2CSRIS, type RO, offset 0x810, reset 0x0000.0000
STOPRIS STARTRIS DATARIS
I2CSMIS, type RO, offset 0x814, reset 0x0000.0000
STOPMIS STARTMIS DATAMIS
July 25, 2011
827
Texas Instruments-Production Data
Register Quick Reference
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
STOPIC
STARTIC
DATAIC
I2CSICR, type WO, offset 0x818, reset 0x0000.0000
828
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
B
Ordering and Contact Information
B.1
Ordering Information
LM3Snnnn–gppss–rrm
Part Number
nnn = Sandstorm-class parts
nnnn = All other Stellaris® parts
Shipping Medium
T = Tape-and-reel
Omitted = Default shipping (tray or tube)
Temperature
E = –40°C to +105°C
I = –40°C to +85°C
Revision
Speed
20 = 20 MHz
25 = 25 MHz
50 = 50 MHz
80 = 80 MHz
Package
BZ = 108-ball BGA
QC = 100-pin LQFP
QN = 48-pin LQFP
QR = 64-pin LQFP
GZ = 48-pin QFN
Table B-1. Part Ordering Information
B.2
Orderable Part Number
Description
LM3S1G58-IQC80-A2
Stellaris LM3S1G58 Microcontroller Industrial Temperature 100-pin LQFP
LM3S1G58-IBZ80-A2
Stellaris LM3S1G58 Microcontroller Industrial Temperature 108-ball BGA
LM3S1G58-IQC80-A2T
Stellaris LM3S1G58 Microcontroller Industrial Temperature 100-pin LQFP
Tape-and-reel
LM3S1G58-IBZ80-A2T
Stellaris LM3S1G58 Microcontroller Industrial Temperature 108-ball BGA
Tape-and-reel
®
Part Markings
The Stellaris microcontrollers are marked with an identifying number. This code contains the following
information:
■ The first line indicates the part number. In the example figure below, this is the LM3S9B90.
■ In the second line, the first seven characters indicate the temperature, package, speed, and
revision. In the example below, this is an Industrial temperature (I), 100-pin LQFP package (QC),
80-MHz (80), revision C0 (C0) device.
■ The remaining characters contain internal tracking numbers.
July 25, 2011
829
Texas Instruments-Production Data
Ordering and Contact Information
B.3
Kits
The Stellaris Family provides the hardware and software tools that engineers need to begin
development quickly.
■ Reference Design Kits accelerate product development by providing ready-to-run hardware and
comprehensive documentation including hardware design files
■ Evaluation Kits provide a low-cost and effective means of evaluating Stellaris microcontrollers
before purchase
■ Development Kits provide you with all the tools you need to develop and prototype embedded
applications right out of the box
See the website at www.ti.com/stellaris for the latest tools available, or ask your distributor.
B.4
Support Information
For support on Stellaris products, contact the TI Worldwide Product Information Center nearest you:
http://www-k.ext.ti.com/sc/technical-support/product-information-centers.htm.
830
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
C
Package Information
C.1
100-Pin LQFP Package
C.1.1
Package Dimensions
Figure C-1. 100-Pin LQFP Package Dimensions
Note:
The following notes apply to the package drawing.
1. All dimensions shown in mm.
2. Dimensions shown are nominal with tolerances indicated.
3. Foot length 'L' is measured at gage plane 0.25 mm above seating plane.
July 25, 2011
831
Texas Instruments-Production Data
Package Information
Body +2.00 mm Footprint, 1.4 mm package thickness
Symbols
Leads
100L
A
Max.
1.60
A1
-
0.05 Min./0.15 Max.
A2
±0.05
1.40
D
±0.20
16.00
D1
±0.05
14.00
E
±0.20
16.00
E1
±0.05
14.00
L
+0.15/-0.10
0.60
e
Basic
0.50
b
+0.05
0.22
θ
-
0˚-7˚
ddd
Max.
0.08
ccc
Max.
0.08
JEDEC Reference Drawing
MS-026
Variation Designator
BED
832
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
C.1.2
Tray Dimensions
Figure C-2. 100-Pin LQFP Tray Dimensions
C.1.3
Tape and Reel Dimensions
Note:
In the figure that follows, pin 1 is located in the top right corner of the device.
July 25, 2011
833
Texas Instruments-Production Data
Package Information
Figure C-3. 100-Pin LQFP Tape and Reel Dimensions
THIS IS A COMPUTER GENERATED
UNCONTROLLED DOCUMENT
PRINTED ON
06.01.2003
06.01.2003
06.01.2003
MUST NOT BE REPRODUCED WITHOUT WRITTEN
PERMISSION FROM SUMICARRIER (S) PTE LTD
06.01.2003
06.01.2003
834
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
C.2
108-Ball BGA Package
C.2.1
Package Dimensions
Figure C-4. 108-Ball BGA Package Dimensions
July 25, 2011
835
Texas Instruments-Production Data
Package Information
Note:
The following notes apply to the package drawing.
Symbols
MIN
NOM
MAX
A
1.22
1.36
1.50
A1
0.29
0.34
0.39
A3
0.65
0.70
0.75
c
0.28
0.32
0.36
D
9.85
10.00
10.15
D1
E
8.80 BSC
9.85
E1
b
10.00
8.80 BSC
0.43
0.48
bbb
0.53
.20
ddd
.12
e
0.80 BSC
f
10.15
-
0.60
M
12
n
108
-
REF: JEDEC MO-219F
836
July 25, 2011
Texas Instruments-Production Data
®
Stellaris LM3S1G58 Microcontroller
C.2.2
Tray Dimensions
Figure C-5. 108-Ball BGA Tray Dimensions
July 25, 2011
837
Texas Instruments-Production Data
Package Information
C.2.3
Tape and Reel Dimensions
Figure C-6. 108-Ball BGA Tape and Reel Dimensions
C-PAK PTE LTD
838
July 25, 2011
Texas Instruments-Production Data
PACKAGE OPTION ADDENDUM
www.ti.com
10-Sep-2011
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package
Drawing
Pins
Package Qty
Eco Plan
(2)
Lead/
Ball Finish
MSL Peak Temp
(3)
Samples
(Requires Login)
LM3S1G58-IBZ80-A1
ACTIVE
NFBGA
ZCR
108
184
TBD
Call TI
Call TI
LM3S1G58-IBZ80-A1T
ACTIVE
NFBGA
ZCR
108
1500
TBD
Call TI
Call TI
LM3S1G58-IQC80-A1
ACTIVE
LQFP
PZ
100
90
TBD
Call TI
Call TI
LM3S1G58-IQC80-A1T
ACTIVE
LQFP
PZ
100
1000
TBD
Call TI
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
Communications and Telecom www.ti.com/communications
Amplifiers
amplifier.ti.com
Computers and Peripherals
www.ti.com/computers
Data Converters
dataconverter.ti.com
Consumer Electronics
www.ti.com/consumer-apps
DLP® Products
www.dlp.com
Energy and Lighting
www.ti.com/energy
DSP
dsp.ti.com
Industrial
www.ti.com/industrial
Clocks and Timers
www.ti.com/clocks
Medical
www.ti.com/medical
Interface
interface.ti.com
Security
www.ti.com/security
Logic
logic.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Transportation and Automotive www.ti.com/automotive
Microcontrollers
microcontroller.ti.com
Video and Imaging
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
Wireless Connctivity
www.ti.com/wirelessconnectivity
TI E2E Community Home Page
www.ti.com/video
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated