LM4040A25IDBZR

厂商：
BURR-BROWN(德州仪器)
封装：
SOT-23
描述：
电压基准 -40℃~+85℃@(Ta) 35uVrms SOT23-3

数据手册：

下载LM4040A25IDBZR.pdf

立即购买

数据手册
价格&库存

LM4040A25IDBZR 数据手册

LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE FEATURES 1 • • • • • • Fixed Output Voltages of 2.048 V, 2.5 V, 3 V, 4.096 V, 5 V, 8.192 V, and 10 V Tight Output Tolerances and Low Temperature Coefficient – Max 0.1%, 100 ppm/°C – A Grade – Max 0.2%, 100 ppm/°C – B Grade – Max 0.5%, 100 ppm/°C – C Grade – Max 1.0%, 150 ppm/°C – D Grade Low Output Noise…35 μVRMS Typ Wide Operating Current Range…45 μA Typ to 15 mA Stable With All Capacitive Loads; No Output Capacitor Required Available in Extended Temperature Range…–40°C to 125°C APPLICATIONS • • • • • • • • Data-Acquisition Systems Power Supplies and Power-Supply Monitors Instrumentation and Test Equipment Process Controls Precision Audio Automotive Electronics Energy Management Battery-Powered Equipment DBZ (SOT-23) PACKAGE (TOP VIEW) CATHODE 1 3* ANODE 2 * Pin 3 is attached to substrate and must be connected to ANODE or left open. DCK (SC-70) PACKAGE (TOP VIEW) ANODE NC CATHODE 1 5 NC 4 NC 2 3 NC – No internal connection LP (TO-92/TO-226) PACKAGE (TOP VIEW) ANODE CATHODE NC NC – No internal connection DESCRIPTION/ORDERING INFORMATION The LM4040 series of shunt voltage references are versatile, easy-to-use references that cater to a vast array of applications. The 2-pin fixed-output device requires no external capacitors for operation and is stable with all capacitive loads. Additionally, the reference offers low dynamic impedance, low noise, and low temperature coefficient to ensure a stable output voltage over a wide range of operating currents and temperatures. The LM4040 uses fuse and Zener-zap reverse breakdown voltage trim during wafer sort to offer four output voltage tolerances, ranging from 0.1% (max) for the A grade to 1% (max) for the D grade. Thus, a great deal of flexibility is offered to designers in choosing the best cost-to-performance ratio for their applications. Packaged in space-saving SC-70 and SOT-23-3 packages and requiring a minimum current of 45 μA (typ), the LM4040 also is ideal for portable applications. The LM4040xI is characterized for operation over an ambient temperature range of –40°C to 85°C. The LM4040xQ is characterized for operation over an ambient temperature range of –40°C to 125°C. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2005–2008, Texas Instruments Incorporated LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com ORDERING INFORMATION (1) TA DEVICE GRADE PACKAGE (2) VKA SC-70 (DCK) 2.048 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 2.5 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 3V SOT-23-3 (DBZ) TO-92/TO-226 (LP) –40°C to 85°C A grade: 0.1% initial accuracy and 100 ppm/°C temperature coefficient SC-70 (DCK) 4.096 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 5V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 8.192 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 10 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) (1) (2) (3) 2 ORDERABLE PART NUMBER Reel of 3000 LM4040A20IDCKR Reel of 3000 LM4040A20IDBZR Reel of 250 LM4040A20IDBZT Bulk of 1000 LM4040A20ILP Reel of 2000 LM4040A20ILPR Reel of 3000 LM4040A25IDCKR Reel of 3000 LM4040A25IDBZR Reel of 250 LM4040A25IDBZT Bulk of 1000 LM4040A25ILP Reel of 2000 LM4040A25ILPR Reel of 3000 LM4040A30IDCKR Reel of 3000 LM4040A30IDBZR Reel of 250 LM4040A30IDBZT Bulk of 1000 LM4040A30ILP Reel of 2000 LM4040A30ILPR Reel of 3000 LM4040A41IDCKR Reel of 3000 LM4040A41IDBZR Reel of 250 LM4040A41IDBZT Bulk of 1000 LM4040A41ILP Reel of 2000 LM4040A41ILPR Reel of 3000 LM4040A50IDCKR Reel of 3000 LM4040A50IDBZR Reel of 250 LM4040A50IDBZT Bulk of 1000 LM4040A50ILP Reel of 2000 LM4040A50ILPR Reel of 3000 LM4040A82IDCKR Reel of 3000 LM4040A82IDBZR Reel of 250 LM4040A82IDBZT Bulk of 1000 LM4040A82ILP Reel of 2000 LM4040A82ILPR Reel of 3000 LM4040A10IDCKR Reel of 3000 LM4040A10IDBZR Reel of 250 LM4040A10IDBZT Bulk of 1000 LM4040A10ILP Reel of 2000 LM4040A10ILPR TOP-SIDE MARKING (3) MS_ 4MC_ PREVIEW P2_ 4NG_ PREVIEW P9_ 4M6_ PREVIEW P4_ 4M2_ PREVIEW N5_ 4NA_ PREVIEW PD_ 4NL_ PREVIEW PH_ 4NQ_ PREVIEW For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. DBZ/DCK: The actual top-side marking has one additional character that designates the wafer fab/assembly site. Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 ORDERING INFORMATION (continued) TA DEVICE GRADE PACKAGE (2) VKA SC-70 (DCK) 2.048 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 2.5 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 3V SOT-23-3 (DBZ) TO-92/TO-226 (LP) –40°C to 85°C B grade: 0.2% initial accuracy and 100 ppm/°C temperature coefficient SC-70 (DCK) 4.096 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 5V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 8.192 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 10 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) Copyright © 2005–2008, Texas Instruments Incorporated ORDERABLE PART NUMBER Reel of 3000 LM4040B20IDCKR Reel of 3000 LM4040B20IDBZR Reel of 250 LM4040B20IDBZT Bulk of 1000 LM4040B20ILP Reel of 2000 LM4040B20ILPR Reel of 3000 LM4040B25IDCKR Reel of 3000 LM4040B25IDBZR Reel of 250 LM4040B25IDBZT Bulk of 1000 LM4040B25ILP Reel of 2000 LM4040B25ILPR Reel of 3000 LM4040B30IDCKR Reel of 3000 LM4040B30IDBZR Reel of 250 LM4040B30IDBZT Bulk of 1000 LM4040B30ILP Reel of 2000 LM4040B30ILPR Reel of 3000 LM4040B41IDCKR Reel of 3000 LM4040B41IDBZR Reel of 250 LM4040B41IDBZT Bulk of 1000 LM4040B41ILP Reel of 2000 LM4040B41ILPR Reel of 3000 LM4040B50IDCKR Reel of 3000 LM4040B50IDBZR Reel of 250 LM4040B50IDBZT Bulk of 1000 LM4040B50ILP Reel of 2000 LM4040B50ILPR Reel of 3000 LM4040B82IDCKR Reel of 3000 LM4040B82IDBZR Reel of 250 LM4040B82IDBZT Bulk of 1000 LM4040B82ILP Reel of 2000 LM4040B82ILPR Reel of 3000 LM4040B10IDCKR Reel of 3000 LM4040B10IDBZR Reel of 250 LM4040B10IDBZT Bulk of 1000 LM4040B10ILP Reel of 2000 LM4040B10ILPR TOP-SIDE MARKING (3) MT_ 4MD_ PREVIEW P3_ 4NH_ PREVIEW PA_ 4M7_ PREVIEW P5_ 4M3_ PREVIEW MX_ 4NB_ PREVIEW PE_ 4NM_ PREVIEW PJ_ 4NR_ PREVIEW Submit Documentation Feedback 3 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com ORDERING INFORMATION (continued) TA DEVICE GRADE PACKAGE (2) VKA SC-70 (DCK) 2.048 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 2.5 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 3V SOT-23-3 (DBZ) TO-92/TO-226 (LP) –40°C to 85°C C grade: 0.5% initial accuracy and 100 ppm/°C temperature coefficient SC-70 (DCK) 4.096 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 5V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 8.192 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 10 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) 4 Submit Documentation Feedback ORDERABLE PART NUMBER Reel of 3000 LM4040C20IDCKR Reel of 3000 LM4040C20IDBZR Reel of 250 LM4040C20IDBZT Bulk of 1000 LM4040C20ILP Reel of 2000 LM4040C20ILPR Reel of 3000 LM4040C25IDCKR Reel of 3000 LM4040C25IDBZR Reel of 250 LM4040C25IDBZT Bulk of 1000 LM4040C25ILP Reel of 2000 LM4040C25ILPR Reel of 3000 LM4040C30IDCKR Reel of 3000 LM4040C30IDBZR Reel of 250 LM4040C30IDBZT Bulk of 1000 LM4040C30ILP Reel of 2000 LM4040C30ILPR Reel of 3000 LM4040C41IDCKR Reel of 3000 LM4040C41IDBZR Reel of 250 LM4040C41IDBZT Bulk of 1000 LM4040C41ILP Reel of 2000 LM4040C41ILPR Reel of 3000 LM4040C50IDCKR Reel of 3000 LM4040C50IDBZR Reel of 250 LM4040C50IDBZT Bulk of 1000 LM4040C50ILP Reel of 2000 LM4040C50ILPR Reel of 3000 LM4040C82IDCKR Reel of 3000 LM4040C82IDBZR Reel of 250 LM4040C82IDBZT Bulk of 1000 LM4040C82ILP Reel of 2000 LM4040C82ILPR Reel of 3000 LM4040C10IDCKR Reel of 3000 LM4040C10IDBZR Reel of 250 LM4040C10IDBZT Bulk of 1000 LM4040C10ILP Reel of 2000 LM4040C10ILPR TOP-SIDE MARKING (3) MV_ 4MQ_ PREVIEW MU_ 4MU_ NFC25I PB_ 4M8_ PREVIEW P6_ 4M4_ PREVIEW MZ_ 4NC_ PREVIEW PF_ 4NN_ PREVIEW PK_ 4NS_ NFC10I Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 ORDERING INFORMATION (continued) TA DEVICE GRADE PACKAGE (2) VKA SC-70 (DCK) 2.048 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 2.5 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 3V SOT-23-3 (DBZ) TO-92/TO-226 (LP) –40°C to 85°C D grade: 1.0% initial accuracy and 150 ppm/°C temperature coefficient SC-70 (DCK) 4.096 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 5V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 8.192 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) SC-70 (DCK) 10 V SOT-23-3 (DBZ) TO-92/TO-226 (LP) Copyright © 2005–2008, Texas Instruments Incorporated ORDERABLE PART NUMBER Reel of 3000 LM4040D20IDCKR Reel of 3000 LM4040D20IDBZR Reel of 250 LM4040D20IDBZT Bulk of 1000 LM4040D20ILP Reel of 2000 LM4040D20ILPR Reel of 3000 LM4040D25IDCKR Reel of 3000 LM4040D25IDBZR Reel of 250 LM4040D25IDBZT Bulk of 1000 LM4040D25ILP Reel of 2000 LM4040D25ILPR Reel of 3000 LM4040D30IDCKR Reel of 3000 LM4040D30IDBZR Reel of 250 LM4040D30IDBZT Bulk of 1000 LM4040D30ILP Reel of 2000 LM4040D30ILPR Reel of 3000 LM4040D41IDCKR Reel of 3000 LM4040D41IDBZR Reel of 250 LM4040D41IDBZT Bulk of 1000 LM4040D41ILP Reel of 2000 LM4040D41ILPR Reel of 3000 LM4040D50IDCKR Reel of 3000 LM4040D50IDBZR Reel of 250 LM4040D50IDBZT Bulk of 1000 LM4040D50ILP Reel of 2000 LM4040D50ILPR Reel of 3000 LM4040D82IDCKR Reel of 3000 LM4040D82IDBZR Reel of 250 LM4040D82IDBZT Bulk of 1000 LM4040D82ILP Reel of 2000 LM4040D82ILPR Reel of 3000 LM4040D10IDCKR Reel of 3000 LM4040D10IDBZR Reel of 250 LM4040D10IDBZT Bulk of 1000 LM4040D10ILP Reel of 2000 LM4040D10ILPR TOP-SIDE MARKING (3) MW_ 4MV_ PREVIEW ME_ 4ME_ NFD25I PC_ 4M9_ PREVIEW P7_ 4M5_ PREVIEW M4_ 4ND_ PREVIEW PG_ 4NP_ PREVIEW PL_ 4NT_ NFD10I Submit Documentation Feedback 5 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com ORDERING INFORMATION (continued) TA DEVICE GRADE VKA PACKAGE (2) 2.048 V C grade: 0.5% initial accuracy and 100 ppm/°C temperature coefficient 2.5 V SOT-23-3 (DBZ) 3V 5V –40°C to 125°C 2.048 V D grade: 1.0% initial accuracy and 150 ppm/°C temperature coefficient 2.5 V SOT-23-3 (DBZ) 3V 5V 6 Submit Documentation Feedback ORDERABLE PART NUMBER Reel of 3000 LM4040C20QDBZR Reel of 250 LM4040C20QDBZT Reel of 3000 LM4040C25QDBZR Reel of 250 LM4040C25QDBZT Reel of 3000 LM4040C30QDBZR Reel of 250 LM4040C30QDBZT Reel of 3000 LM4040C50QDBZR Reel of 250 LM4040C50QDBZT Reel of 3000 LM4040D20QDBZR Reel of 250 LM4040D20QDBZT Reel of 3000 LM4040D25QDBZR Reel of 250 LM4040D25QDBZT Reel of 3000 LM4040D30QDBZR Reel of 250 LM4040D30QDBZT Reel of 3000 LM4040D50QDBZR Reel of 250 LM4040D50QDBZT TOP-SIDE MARKING (3) 4MW_ 4MA_ 4NJ_ 4NE_ 4MY_ 4MB_ 4NK_ 4NF_ Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 FUNCTIONAL BLOCK DIAGRAM CATHODE + _ ANODE Absolute Maximum Ratings (1) over free-air temperature range (unless otherwise noted) IZ Continuous cathode current θJA Package thermal impedance (2) (3) TJ Operating virtual junction temperature Tstg Storage temperature range (1) (2) (3) MIN MAX –10 25 DBZ package 206 DCK package 252 LP package 156 –65 UNIT mA °C/W 150 °C 150 °C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions IZ Cathode current TA Free-air temperature (1) MIN MAX (1) 15 LM4040xxxI –40 85 LM4040xxxQ –40 125 UNIT mA °C See parametric tables Copyright © 2005–2008, Texas Instruments Incorporated Submit Documentation Feedback 7 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com LM4040x20I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP LM4040B20I MAX IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA MIN 2.048 TYP MAX 2.048 25°C –2 2 –4.1 4.1 –15 15 –17 17 45 75 45 80 ±20 ±20 25°C ±15 ±15 Full range ±100 25°C ±15 25°C 0.3 Full range 25°C ±100 Full range mV μA ppm/°C ±15 0.8 0.3 1 2.5 75 80 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040A20I MIN 25°C 25°C IZ = 10 mA αVZ TA 6 0.8 1 2.5 8 6 mV 8 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 8 0.8 0.3 0.8 Ω 25°C 0.3 25°C 35 35 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 LM4040x20I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP LM4040D20I MAX IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA MIN 2.048 TYP MAX 2.048 25°C –10 10 –20 20 –23 23 –40 40 45 75 45 80 ±20 ±20 25°C ±15 ±15 Full range ±100 25°C ±15 25°C 0.3 ±150 mV μA ppm/°C ±15 0.8 Full range 25°C 75 80 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040C20I MIN 25°C 25°C IZ = 10 mA αVZ TA 0.3 1 2.5 6 Full range 1 1.2 2.5 8 8 mV 10 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 0.9 0.3 1.1 Ω 25°C 0.3 25°C 35 35 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Copyright © 2005–2008, Texas Instruments Incorporated Submit Documentation Feedback 9 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com LM4040x20Q Electrical Characteristics at extended temperature range, full-range TA = –40°C to 125°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA LM4040D20Q MAX MIN 2.048 TYP MAX 2.048 25°C –10 10 –20 20 –30 30 –50 50 45 75 45 80 ±20 ±20 25°C ±15 ±15 Full range ±100 25°C ±15 25°C 0.3 Full range 25°C ±150 Full range mV μA ppm/°C ±15 0.8 0.3 1 2.5 75 80 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040C20Q MIN 25°C 25°C IZ = 10 mA αVZ TA 6 1 1.2 2.5 8 8 mV 10 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 10 0.9 0.3 1.1 Ω 25°C 0.3 25°C 35 35 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 LM4040x25I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP LM4040B25I MAX IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA MIN 2.5 TYP MAX 2.5 25°C –2.5 2.5 –5 5 –19 19 –21 21 45 75 45 80 ±20 ±20 25°C ±15 ±15 Full range ±100 25°C ±15 25°C 0.3 ±100 mV μA ppm/°C ±15 0.8 Full range 25°C 75 80 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040A25I MIN 25°C 25°C IZ = 10 mA αVZ TA 0.3 1 2.5 6 Full range 0.8 1 2.5 8 6 mV 8 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 0.8 0.3 0.8 Ω 25°C 0.3 25°C 35 35 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Copyright © 2005–2008, Texas Instruments Incorporated Submit Documentation Feedback 11 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com LM4040x25I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP LM4040D25I MAX IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA MIN 2.5 TYP MAX 2.5 25°C –12 12 –25 25 –29 29 –49 49 45 75 45 80 ±20 ±20 25°C ±15 ±15 Full range ±100 25°C ±15 25°C 0.3 Full range 25°C ±150 Full range mV μA ppm/°C ±15 0.8 0.3 1 2.5 75 80 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040C25I MIN 25°C 25°C IZ = 10 mA αVZ TA 6 1 1.2 2.5 8 8 mV 10 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 12 0.9 0.3 1.1 Ω 25°C 0.3 25°C 35 35 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 LM4040x25Q Electrical Characteristics at extended temperature range, full-range TA = –40°C to 125°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA LM4040D25Q MAX MIN 2.5 TYP MAX 2.5 25°C –12 12 –25 25 –38 38 –63 63 45 75 45 80 ±20 ±20 25°C ±15 ±15 Full range ±100 25°C ±15 25°C 0.3 ±150 mV μA ppm/°C ±15 0.8 Full range 25°C 75 80 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040C25Q MIN 25°C 25°C IZ = 10 mA αVZ TA 0.3 1 2.5 6 Full range 1 1.2 2.5 8 8 mV 10 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 0.9 0.3 1.1 Ω 25°C 0.3 25°C 35 35 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Copyright © 2005–2008, Texas Instruments Incorporated Submit Documentation Feedback 13 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com LM4040x30I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP LM4040B30I MAX IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA MIN 3 TYP MAX 3 25°C –3 3 –6 6 –22 22 –26 26 47 77 47 82 ±20 ±20 25°C ±15 ±15 Full range ±100 25°C ±15 25°C 0.6 Full range 25°C ±100 Full range mV μA ppm/°C ±15 0.8 0.6 1.1 2.7 77 82 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040A30I MIN 25°C 25°C IZ = 10 mA αVZ TA 6 0.8 1.1 2.7 9 6 mV 9 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 14 0.9 0.4 0.9 Ω 25°C 0.4 25°C 35 35 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 LM4040x30I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP LM4040D30I MAX IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA MIN 3 TYP MAX 3 25°C –15 15 –30 30 –34 34 –59 59 45 77 45 82 ±20 ±20 25°C ±15 ±15 Full range ±100 25°C ±15 25°C 0.4 ±150 mV μA ppm/°C ±15 0.8 Full range 25°C 77 82 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040C30I MIN 25°C 25°C IZ = 10 mA αVZ TA 1.4 1.1 2.7 6 Full range 1 1.3 2.7 9 8 mV 11 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 0.9 0.4 1.2 Ω 25°C 0.4 25°C 35 35 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Copyright © 2005–2008, Texas Instruments Incorporated Submit Documentation Feedback 15 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com LM4040x30Q Electrical Characteristics at extended temperature range, full-range TA = –40°C to 125°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA LM4040D30Q MAX MIN 3 TYP MAX 3 25°C –15 15 –30 30 –45 45 –75 75 47 77 47 82 ±20 ±20 25°C ±15 ±15 Full range ±100 25°C ±15 25°C 0.4 Full range 25°C ±150 Full range mV μA ppm/°C ±15 0.8 0.4 1.1 2.7 77 82 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040C30Q MIN 25°C 25°C IZ = 10 mA αVZ TA 6 1.1 1.3 2.7 9 8 mV 11 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 16 0.9 0.4 1.2 Ω 25°C 0.4 25°C 35 35 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 LM4040x41I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP LM4040B41I MAX IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA MIN 4.096 TYP MAX 4.096 25°C –4.1 4.1 –8.2 8.2 –31 31 –35 35 50 83 50 88 ±30 ±30 25°C ±20 ±20 Full range ±100 25°C ±20 25°C 0.5 ±100 mV μA ppm/°C ±20 0.9 Full range 25°C 83 88 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040A41I MIN 25°C 25°C IZ = 10 mA αVZ TA 0.5 1.2 3 7 Full range 0.9 1.2 3 10 7 mV 10 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 1 0.5 1 Ω 25°C 0.5 25°C 80 80 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Copyright © 2005–2008, Texas Instruments Incorporated Submit Documentation Feedback 17 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com LM4040x41I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP LM4040D41I MAX IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA MIN 4.096 TYP MAX 4.096 25°C –20 20 –41 41 –47 47 –81 81 50 83 50 88 ±30 ±30 25°C ±20 ±20 Full range ±100 25°C ±20 25°C 0.5 Full range 25°C ±150 Full range mV μA ppm/°C ±20 0.9 0.5 1.2 3 83 88 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040C41I MIN 25°C 25°C IZ = 10 mA αVZ TA 7 1.2 1.5 3 10 9 mV 13 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 18 1 0.5 1.3 Ω 25°C 0.5 25°C 80 80 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 LM4040x50I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP LM4040B50I MAX IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA MIN 5 TYP MAX 5 25°C –5 5 –10 10 –38 38 –43 43 65 89 65 95 ±30 ±30 25°C ±20 ±20 Full range ±100 25°C ±20 25°C 0.5 ±100 mV μA ppm/°C ±20 1 Full range 25°C 89 95 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040A50I MIN 25°C 25°C IZ = 10 mA αVZ TA 0.5 1.4 3.5 8 Full range 1 1.4 3.5 12 8 mV 12 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 1.1 0.5 1.1 Ω 25°C 0.5 25°C 80 80 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Copyright © 2005–2008, Texas Instruments Incorporated Submit Documentation Feedback 19 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com LM4040x50I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP LM4040D50I MAX IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA MIN 5 TYP MAX 5 25°C –25 25 –50 50 –58 58 –99 99 65 89 65 95 ±30 ±30 25°C ±20 ±20 Full range ±100 25°C ±20 25°C 0.5 Full range 25°C ±150 Full range mV μA ppm/°C ±20 1 0.5 1.4 3.5 89 95 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040C50I MIN 25°C 25°C IZ = 10 mA αVZ TA 8 1.3 1.8 3.5 12 10 mV 15 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 20 1.1 0.5 1.5 Ω 25°C 0.5 25°C 80 80 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 LM4040x50Q Electrical Characteristics at extended temperature range, full-range TA = –40°C to 125°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 100 μA ΔVZ Reverse breakdown voltage tolerance IZ = 100 μA IZ,min Minimum cathode current IZ = 100 μA Reverse breakdown voltage change with cathode current change TYP IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA LM4040D50Q MAX MIN 5 TYP MAX 5 25°C –25 25 –50 50 –75 75 –125 125 65 89 65 95 ±30 ±30 25°C ±20 ±20 Full range ±100 25°C ±20 25°C 0.5 ±150 mV μA ppm/°C ±20 1 Full range 25°C 89 95 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040C50Q MIN 25°C 25°C IZ = 10 mA αVZ TA 0.5 1.4 3.5 8 Full range 1 1.8 3.5 12 8 mV 12 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 100 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 1.1 0.5 1.1 Ω 25°C 0.5 25°C 80 80 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Copyright © 2005–2008, Texas Instruments Incorporated Submit Documentation Feedback 21 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com LM4040x82I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 150 μA ΔVZ Reverse breakdown voltage tolerance IZ = 150 μA IZ,min Minimum cathode current IZ = 150 μA Reverse breakdown voltage change with cathode current change TYP IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA LM4040B82I MAX MIN 8.192 TYP MAX 8.192 25°C –8.2 8.2 –16 16 –61 61 –70 70 67 106 67 110 ±40 ±40 25°C ±20 ±20 Full range ±100 25°C ±20 25°C 0.6 Full range 25°C ±100 Full range mV μA ppm/°C ±20 1.3 0.6 2.5 7 106 110 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040A82I MIN 25°C 25°C IZ = 10 mA αVZ TA 10 1.6 2.5 7 18 10 mV 18 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 150 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 150 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 22 1.5 0.6 1.5 Ω 25°C 0.6 25°C 130 130 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 LM4040x82I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 150 μA ΔVZ Reverse breakdown voltage tolerance IZ = 150 μA IZ,min Minimum cathode current IZ = 150 μA Reverse breakdown voltage change with cathode current change TYP IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA LM4040D82I MAX MIN 8.192 TYP MAX 8.192 25°C –41 41 –82 82 –94 94 –162 162 67 106 67 110 ±40 ±40 25°C ±20 ±20 Full range ±100 25°C ±20 25°C 0.6 ±150 mV μA ppm/°C ±20 1.3 Full range 25°C 111 115 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040C82I MIN 25°C 25°C IZ = 10 mA αVZ TA 0.6 2.5 7 10 Full range 1.7 3 7 18 15 mV 24 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 150 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 150 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 1.5 0.6 1.9 Ω 25°C 0.6 25°C 130 130 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Copyright © 2005–2008, Texas Instruments Incorporated Submit Documentation Feedback 23 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com LM4040x10I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 150 μA ΔVZ Reverse breakdown voltage tolerance IZ = 150 μA IZ,min Minimum cathode current IZ = 150 μA Reverse breakdown voltage change with cathode current change TYP IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA LM4040B10I MAX MIN 10 TYP MAX 10 25°C –10 10 –20 20 –75 75 –85 85 75 120 75 125 ±40 ±40 25°C ±20 ±20 Full range ±100 25°C ±20 25°C 0.8 Full range 25°C ±100 Full range mV μA ppm/°C ±20 1.5 0.8 3.5 8 120 125 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040A10I MIN 25°C 25°C IZ = 10 mA αVZ TA 14 1.5 3.5 8 24 14 mV 24 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 150 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 150 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 24 1.7 0.7 1.7 Ω 25°C 0.7 25°C 180 180 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 LM4040x10I Electrical Characteristics at industrial temperature range, full-range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS VZ Reverse breakdown voltage IZ = 150 μA ΔVZ Reverse breakdown voltage tolerance IZ = 150 μA IZ,min Minimum cathode current IZ = 150 μA Reverse breakdown voltage change with cathode current change TYP IZ,min < IZ < 1 mA 1 mA < IZ < 15 mA LM4040D10I MAX MIN 10 TYP MAX 10 25°C –50 50 –100 100 –115 115 –198 198 75 120 75 125 ±40 ±40 25°C ±20 ±20 Full range ±100 25°C ±20 25°C 0.8 ±150 mV μA ppm/°C ±20 1.5 Full range 25°C 130 135 25°C UNIT V Full range Full range Average temperature coefficient IZ = 1 mA of reverse breakdown voltage DVZ DI Z LM4040C10I MIN 25°C 25°C IZ = 10 mA αVZ TA 0.8 3.5 8 14 Full range 2 4 8 24 18 mV 29 ZZ Reverse dynamic impedance IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ eN Wideband noise IZ = 150 μA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 150 μA 120 120 ppm Thermal hysteresis (1) ΔTA = –40°C to 125°C 0.08 0.08 % VHYST (1) 1.7 0.7 2.3 Ω 25°C 0.7 25°C 180 180 μVRMS Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Copyright © 2005–2008, Texas Instruments Incorporated Submit Documentation Feedback 25 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com TYPICAL CHARACTERISTICS VZ = 2.5 V IZ = 150 µA 50 ppm/°C 20 ppm/°C 7 ppm/°C 0.4 0.3 0.2 0.1 0 −0.1 −0.2 −0.3 −0.4 −20 0 20 40 60 80 Temperature (_C) 100 120 Figure 1. Temperature Drift for Different Average Temperature Coefficients 1000 No Capacitor 100 VZ = 2.5 V IZ = 1 mA TJ = 25°C IZ,AC = 0.1 IZ 10 100 1-µF Tantanlum Capacitor 1 VZ = 2.5 V IZ = 150 µA TJ = 25°C IZ,AC = 0.1 IZ 1 0.1 100 XC 1k 10k 100k 1M Frequency (Hz) Figure 2. Output Impedance vs Frequency VZ = 2.5 V TJ = 25°C 100 80 60 40 20 1k 10k Frequency (Hz) 100k 0 0.0 0 1M 0.5 1.0 1 1.5 1.5 2.0 2 2.5 3.0 3 VZ, Reverse Voltage (V) Figure 3. Output Impedance vs Frequency 6 VZ = 2.5 V IZ = 200 µA TJ = 25°C Figure 4. Temperature Drift for Different Average Temperature Coefficient 6 4 5 VZ = 2.5 V TJ = 25°C RS = 30 kΩ 4 VZ (V) Noise (µVP/Hz) 1 µF Tantanlum Capacitor 10 XC 0.1 100 10 No Capacitor 120 IZ, Cathode Current (µA) ZZ, Dynamic Output Impedance (Ω) −40 1000 1 2 VIN 0 3 −2 −4 2 VZ VIN (V) 0.5 VZ, Change (%) ZZ, Dynamic Output Impedance (Ω) 0.6 −6 1 −8 0 0.1 1 10 100 1k Frequency (Hz) 10k Figure 5. Noise Voltage vs Frequency 26 Submit Documentation Feedback 100k −1 −10 −10 −12 0 10 20 30 40 50 60 70 80 90 Response Time (µs) Figure 6. Start-Up Characteristics Copyright © 2005–2008, Texas Instruments Incorporated LM4040 www.ti.com .................................................................................................................................................. SLOS456K – JANUARY 2005 – REVISED MARCH 2008 APPLICATION INFORMATION Start-Up Characteristics RS VIN 1-Hz Rate LM4040 VZ Figure 7. Test Circuit Output Capacitor The LM4040 does not require an output capacitor across cathode and anode for stability. However, if an output bypass capacitor is desired, the LM4040 is designed to be stable with all capacitive loads. SOT-23 Connections There is a parasitic Schottky diode connected between pins 2 and 3 of the SOT-23 packaged device. Thus, pin 3 of the SOT-23 package must be left floating or connected to pin 2. Use With ADCs or DACs The LM4040x-41 is designed to be a cost-effective voltage reference as required in 12-bit data-acquisition systems. For 12-bit systems operating from 5-V supplies such as the ADS7842 (see Figure 8), the LM4040x-41 (4.096 V) permits operation with an LSB of 1 mV. ADS7842 0 V to VREF 1 AIN0 5V 2 AIN1 909 + 2.2 µF LM4040A-41 VANA VDIG 28 27 3 AIN2 A1 26 4 AIN3 A0 25 5 VREF CLK 24 + 0.1 µF + 5-V Analog Supply 10 µF 3.2-MHz Clock BUSY 23 BUSY Output 7 DB11 WR 22 Write Input 8 DB10 CS 21 9 DB9 RD 20 6 AGND 10 DB8 DB0 19 11 DB7 DB1 18 12 DB6 DB2 17 13 DB5 DB3 16 14 DGND DB4 15 Read Input Figure 8. Data-Acquisition Circuit With LM4040x-41 Copyright © 2005–2008, Texas Instruments Incorporated Submit Documentation Feedback 27 LM4040 SLOS456K – JANUARY 2005 – REVISED MARCH 2008 .................................................................................................................................................. www.ti.com Cathode and Load Currents In a typical shunt-regulator configuration (see Figure 9), an external resistor, RS, is connected between the supply and the cathode of the LM4040. RS must be set properly, as it sets the total current available to supply the load (IL) and bias the LM4040 (IZ). In all cases, IZ must stay within a specified range for proper operation of the reference. Taking into consideration one extreme in the variation of the load and supply voltage (maximum IL and minimum VS), RS must be small enough to supply the minimum IZ required for operation of the regulator, as given by data-sheet parameters. At the other extreme, maximum VS and minimum IL, RS must be large enough to limit IZ to less than its maximum-rated value of 15 mA. RS is calculated according to Equation 1: ǒVS * VZǓ RS + (I L ) I Z) (1) VS RS IZ + IL IL VZ IZ LM4040 Figure 9. Shunt Regulator 28 Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2014 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040A10IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NQU LM4040A10IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NQU LM4040A10IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NQU LM4040A10IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 PHU LM4040A10ILP PREVIEW TO-92 LP 3 1000 TBD Call TI Call TI -40 to 85 LM4040A10ILPR PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040A20IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MCU LM4040A20IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MCU LM4040A20IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MCU LM4040A20IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MCU LM4040A20IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MSU LM4040A20IDCKRE4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MSU LM4040A25IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NG3 ~ 4NGU) LM4040A25IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NG3 ~ 4NGU) LM4040A25IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NG3 ~ 4NGU) LM4040A25IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 P2U LM4040A25ILP PREVIEW TO-92 LP 3 1000 TBD Call TI Call TI -40 to 85 LM4040A25ILPR PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040A30IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 Addendum-Page 1 4M6U Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040A30IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M6U LM4040A30IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M6U LM4040A30IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M6U LM4040A30IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 P9U LM4040A30IDCKRE4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 P9U LM4040A30IDCKT PREVIEW SC70 DCK 5 250 TBD Call TI Call TI -40 to 85 LM4040A30ILP PREVIEW TO-92 LP 3 1000 TBD Call TI Call TI -40 to 85 LM4040A30ILPM PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040A30ILPR PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040A41IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M2U LM4040A41IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M2U LM4040A41IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M2U LM4040A41IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M2U LM4040A41IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 P4U LM4040A41ILP PREVIEW TO-92 LP 3 1000 TBD Call TI Call TI -40 to 85 LM4040A41ILPR PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040A50IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NA3 ~ 4NAU) LM4040A50IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NA3 ~ 4NAU) LM4040A50IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NA3 ~ 4NAU) LM4040A50IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 N5U Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) LM4040A50IDCKRG4 ACTIVE Package Type Package Pins Package Drawing Qty SC70 DCK 5 3000 Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 Device Marking (4/5) N5U LM4040A50ILP PREVIEW TO-92 LP 3 1000 TBD Call TI Call TI -40 to 85 LM4040A82IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NLU LM4040A82IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NLU LM4040A82IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NLU LM4040A82IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 PDU LM4040B10IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NRU LM4040B10IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NRU LM4040B10IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NRU LM4040B10IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 PJU LM4040B10ILP PREVIEW TO-92 LP 3 1000 TBD Call TI Call TI -40 to 85 LM4040B10ILPR PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040B20IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MDU LM4040B20IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MDU LM4040B20IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MDU LM4040B20IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MDU LM4040B20IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MTU LM4040B25IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NH3 ~ 4NHU) LM4040B25IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NH3 ~ 4NHU) Addendum-Page 3 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040B25IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NH3 ~ 4NHU) LM4040B25IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NH3 ~ 4NHU) LM4040B25IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 P3U LM4040B25IDCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 P3U LM4040B25ILP PREVIEW TO-92 LP 3 1000 TBD Call TI Call TI -40 to 85 LM4040B25ILPR PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040B30IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M7U LM4040B30IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M7U LM4040B30IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M7U LM4040B30IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 PAU LM4040B30IDCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 PAU LM4040B30IDCKT PREVIEW SC70 DCK 5 250 TBD Call TI Call TI -40 to 85 LM4040B30ILP PREVIEW TO-92 LP 3 1000 TBD Call TI Call TI -40 to 85 LM4040B30ILPM PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040B30ILPR PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040B41IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M3U LM4040B41IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M3U LM4040B41IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M3U LM4040B41IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 P5U LM4040B41ILP PREVIEW TO-92 LP 3 1000 TBD Call TI Call TI -40 to 85 LM4040B41ILPR PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 Addendum-Page 4 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040B50IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NB3 ~ 4NBU) LM4040B50IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NB3 ~ 4NBU) LM4040B50IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NB3 ~ 4NBU) LM4040B50IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MXU LM4040B50ILP PREVIEW TO-92 LP 3 1000 TBD Call TI Call TI -40 to 85 LM4040B50ILPR PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040B82IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NMU LM4040B82IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 PEU LM4040C10IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NSU LM4040C10IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NSU LM4040C10IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NSU LM4040C10IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 PKU LM4040C10ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC10I LM4040C10ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC10I LM4040C10ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC10I LM4040C10ILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC10I LM4040C20IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MQU LM4040C20IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MQU LM4040C20IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MQU Addendum-Page 5 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040C20IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MVU LM4040C20ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC20I LM4040C20ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC20I LM4040C20ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC20I LM4040C20QDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 4MWU LM4040C20QDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 4MWU LM4040C20QDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 4MWU LM4040C20QDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 4MWU LM4040C25IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4MU3 ~ 4MUU) LM4040C25IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4MU3 ~ 4MUU) LM4040C25IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4MU3 ~ 4MUU) LM4040C25IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4MU3 ~ 4MUU) LM4040C25IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MUU LM4040C25IDCKT ACTIVE SC70 DCK 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MUU LM4040C25IDCKTE4 ACTIVE SC70 DCK 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MUU LM4040C25IDCKTG4 ACTIVE SC70 DCK 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MUU LM4040C25ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC25I LM4040C25ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC25I Addendum-Page 6 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040C25ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC25I LM4040C25ILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC25I LM4040C25QDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4MA3 ~ 4MAU) LM4040C25QDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4MA3 ~ 4MAU) LM4040C25QDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4MA3 ~ 4MAU) LM4040C25QDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4MA3 ~ 4MAU) LM4040C30IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M8U LM4040C30IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M8U LM4040C30IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M8U LM4040C30IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M8U LM4040C30IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 PBU LM4040C30IDCKT PREVIEW SC70 DCK 5 250 TBD Call TI Call TI -40 to 85 LM4040C30ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC30I LM4040C30ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC30I LM4040C30ILPM PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040C30ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC30I LM4040C30QDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 4NJU LM4040C30QDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 4NJU LM4040C41IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M4U Addendum-Page 7 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040C41IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M4U LM4040C41IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M4U LM4040C41IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M4U LM4040C41IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 P6U LM4040C41IDCKRE4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 P6U LM4040C41IDCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 P6U LM4040C41ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC41I LM4040C41ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC41I LM4040C41ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC41I LM4040C50IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NC3 ~ 4NCU) LM4040C50IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NC3 ~ 4NCU) LM4040C50IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NC3 ~ 4NCU) LM4040C50IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4NC3 ~ 4NCU) LM4040C50IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MZU LM4040C50ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC50I LM4040C50ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC50I LM4040C50ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC50I LM4040C50QDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4NE3 ~ 4NEU) Addendum-Page 8 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040C50QDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4NE3 ~ 4NEU) LM4040C50QDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4NE3 ~ 4NEU) LM4040C82IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NNU LM4040C82IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 PFU LM4040C82ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC82I LM4040C82ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFC82I LM4040D20IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MVU LM4040D20IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MVU LM4040D20IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MVU LM4040D20IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4MVU LM4040D20IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MWU LM4040D20IDCKRE4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MWU LM4040D20IDCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MWU LM4040D20ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD20I LM4040D20ILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD20I LM4040D20QDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 4MYU LM4040D20QDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 4MYU LM4040D20QDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 4MYU Addendum-Page 9 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040D25IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4ME3 ~ 4MEU) LM4040D25IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4ME3 ~ 4MEU) LM4040D25IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4ME3 ~ 4MEU) LM4040D25IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4ME3 ~ 4MEU) LM4040D25IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MEU LM4040D25IDCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MEU LM4040D25IDCKT ACTIVE SC70 DCK 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MEU LM4040D25IDCKTG4 ACTIVE SC70 DCK 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MEU LM4040D25ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD25I LM4040D25ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD25I LM4040D25ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD25I LM4040D25QDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4MB3 ~ 4MBU) LM4040D25QDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4MB3 ~ 4MBU) LM4040D25QDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4MB3 ~ 4MBU) LM4040D25QDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4MB3 ~ 4MBU) LM4040D30IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M9U LM4040D30IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M9U LM4040D30IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M9U Addendum-Page 10 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040D30IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M9U LM4040D30IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 PCU LM4040D30IDCKT PREVIEW SC70 DCK 5 250 TBD Call TI Call TI -40 to 85 LM4040D30ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD30I LM4040D30ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD30I LM4040D30ILPM PREVIEW TO-92 LP 3 2000 TBD Call TI Call TI -40 to 85 LM4040D30ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD30I LM4040D30ILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD30I LM4040D30QDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 4NKU LM4040D30QDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 4NKU LM4040D41IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M5U LM4040D41IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M5U LM4040D41IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M5U LM4040D41IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4M5U LM4040D41IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 P7U LM4040D41ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD41I LM4040D41ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD41I LM4040D41ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD41I LM4040D41ILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD41I Addendum-Page 11 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM4040D50IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4ND3 ~ 4NDU) LM4040D50IDBZRG4 ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4ND3 ~ 4NDU) LM4040D50IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4ND3 ~ 4NDU) LM4040D50IDBZTG4 ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 (4ND3 ~ 4NDU) LM4040D50IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 M4U LM4040D50IDCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 M4U LM4040D50ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD50I LM4040D50ILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD50I LM4040D50ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD50I LM4040D50ILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD50I LM4040D50QDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4NF3 ~ 4NFU) LM4040D50QDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 (4NF3 ~ 4NFU) LM4040D82IDBZR ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NPU LM4040D82IDBZT ACTIVE SOT-23 DBZ 3 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 4NPU LM4040D82IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 PGU LM4040D82ILP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD82I LM4040D82ILPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type -40 to 85 NFD82I The marketing status values are defined as follows: Addendum-Page 12 Samples PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2014 ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF LM4040C25 : • Enhanced Product: LM4040C25-EP NOTE: Qualified Version Definitions: Addendum-Page 13 PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2014 • Enhanced Product - Supports Defense, Aerospace and Medical Applications Addendum-Page 14 PACKAGE MATERIALS INFORMATION www.ti.com 12-Aug-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ LM4040A10IDBZR SOT-23 3000 179.0 8.4 DBZ 3 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.15 2.95 1.22 4.0 8.0 Q3 LM4040A10IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040A10IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040A20IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040A20IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040A20IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040A25IDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040A25IDBZT SOT-23 DBZ 3 250 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040A25IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040A30IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040A30IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040A30IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040A41IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040A41IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040A41IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040A50IDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040A50IDBZT SOT-23 DBZ 3 250 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040A50IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 12-Aug-2013 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) LM4040A82IDBZR SOT-23 DBZ 3 3000 179.0 8.4 LM4040A82IDBZT SOT-23 DBZ 3 250 179.0 8.4 LM4040A82IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 LM4040B10IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 LM4040B10IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 LM4040B10IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 LM4040B20IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 LM4040B20IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 LM4040B20IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 LM4040B25IDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 LM4040B25IDBZT SOT-23 DBZ 3 250 178.0 9.2 3.08 LM4040B25IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 LM4040B30IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 LM4040B30IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 LM4040B30IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 LM4040B41IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 LM4040B41IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 LM4040B41IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 LM4040B50IDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 LM4040B50IDBZT SOT-23 DBZ 3 250 178.0 9.2 LM4040B50IDCKR SC70 DCK 5 3000 179.0 W Pin1 (mm) Quadrant 3.15 2.95 1.22 4.0 8.0 Q3 3.15 2.95 1.22 4.0 8.0 Q3 2.5 1.2 4.0 8.0 Q3 2.95 1.22 4.0 8.0 Q3 1.22 4.0 8.0 Q3 2.5 1.2 4.0 8.0 Q3 2.95 1.22 4.0 8.0 Q3 1.22 4.0 8.0 Q3 2.5 1.2 4.0 8.0 Q3 2.8 1.27 4.0 8.0 Q3 2.8 1.27 4.0 8.0 Q3 2.5 1.2 4.0 8.0 Q3 2.95 1.22 4.0 8.0 Q3 1.22 4.0 8.0 Q3 2.5 1.2 4.0 8.0 Q3 2.95 1.22 4.0 8.0 Q3 1.22 4.0 8.0 Q3 2.5 1.2 4.0 8.0 Q3 2.8 1.27 4.0 8.0 Q3 3.08 2.8 1.27 4.0 8.0 Q3 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040B82IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040B82IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040C10IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C10IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C10IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040C20IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C20IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C20IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040C20QDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C20QDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C25IDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040C25IDBZT SOT-23 DBZ 3 250 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040C25IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040C25IDCKT SC70 DCK 5 250 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040C25QDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040C25QDBZT SOT-23 DBZ 3 250 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040C30IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C30IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C30IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040C30QDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C30QDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C41IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 12-Aug-2013 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LM4040C41IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C41IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040C50IDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040C50IDBZT SOT-23 DBZ 3 250 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040C50IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040C50QDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040C50QDBZT SOT-23 DBZ 3 250 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040C82IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040C82IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040D20IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040D20IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040D20IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040D20QDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040D20QDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040D25IDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040D25IDBZT SOT-23 DBZ 3 250 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040D25IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040D25IDCKT SC70 DCK 5 250 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040D25QDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040D25QDBZT SOT-23 DBZ 3 250 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040D30IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040D30IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040D30IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040D30QDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040D41IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040D41IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040D41IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040D50IDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040D50IDBZT SOT-23 DBZ 3 250 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040D50IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 LM4040D50QDBZR SOT-23 DBZ 3 3000 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040D50QDBZT SOT-23 DBZ 3 250 178.0 9.2 3.08 2.8 1.27 4.0 8.0 Q3 LM4040D82IDBZR SOT-23 DBZ 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040D82IDBZT SOT-23 DBZ 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 Q3 LM4040D82IDCKR SC70 DCK 5 3000 179.0 8.4 2.2 2.5 1.2 4.0 8.0 Q3 Pack Materials-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 12-Aug-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4040A10IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040A10IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040A10IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040A20IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040A20IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040A20IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040A25IDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 LM4040A25IDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040A25IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040A30IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040A30IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040A30IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040A41IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040A41IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040A41IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040A50IDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 LM4040A50IDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040A50IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040A82IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040A82IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 Pack Materials-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 12-Aug-2013 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4040A82IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040B10IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040B10IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040B10IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040B20IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040B20IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040B20IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040B25IDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 LM4040B25IDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040B25IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040B30IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040B30IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040B30IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040B41IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040B41IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040B41IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040B50IDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 LM4040B50IDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040B50IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040B82IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040B82IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040C10IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040C10IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040C10IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040C20IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040C20IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040C20IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040C20QDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040C20QDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040C25IDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 LM4040C25IDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040C25IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040C25IDCKT SC70 DCK 5 250 203.0 203.0 35.0 LM4040C25QDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 LM4040C25QDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040C30IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040C30IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040C30IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040C30QDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040C30QDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040C41IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040C41IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040C41IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040C50IDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 Pack Materials-Page 5 PACKAGE MATERIALS INFORMATION www.ti.com 12-Aug-2013 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4040C50IDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040C50IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040C50QDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 LM4040C50QDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040C82IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040C82IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040D20IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040D20IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040D20IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040D20QDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040D20QDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040D25IDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 LM4040D25IDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040D25IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040D25IDCKT SC70 DCK 5 250 203.0 203.0 35.0 LM4040D25QDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 LM4040D25QDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040D30IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040D30IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040D30IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040D30QDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040D41IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040D41IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040D41IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040D50IDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 LM4040D50IDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040D50IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 LM4040D50QDBZR SOT-23 DBZ 3 3000 180.0 180.0 18.0 LM4040D50QDBZT SOT-23 DBZ 3 250 180.0 180.0 18.0 LM4040D82IDBZR SOT-23 DBZ 3 3000 203.0 203.0 35.0 LM4040D82IDBZT SOT-23 DBZ 3 250 203.0 203.0 35.0 LM4040D82IDCKR SC70 DCK 5 3000 203.0 203.0 35.0 Pack Materials-Page 6 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2014, Texas Instruments Incorporated

下载 PDF

LM4040A25IDBZR 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“LM4040A25IDBZR”相匹配的价格&库存，您可以联系我们找货

免费人工找货

国内价格
1+14.72900
10+13.59600
30+13.36940

库存：0

去购买

搜索历史

LM4040A25IDBZR

推荐型号

相关技术文章