LMC7111
www.ti.com
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
LMC7111 Tiny CMOS Operational Amplifier with Rail-to-Rail Input and Output
Check for Samples: LMC7111
FEATURES
DESCRIPTION
•
•
•
•
•
•
•
The LMC7111 is a micropower CMOS operational
amplifier available in the space saving SOT-23
package. This makes the LMC7111 ideal for space
and weight critical designs. The wide common-mode
input range makes it easy to design battery
monitoring circuits which sense signals above the V+
supply. The main benefits of the Tiny package are
most apparent in small portable electronic devices,
such as mobile phones, pagers, and portable
computers. The tiny amplifiers can be placed on a
board where they are needed, simplifying board
layout.
1
2
•
Tiny 5-Pin SOT-23 Package Saves Space
Very Wide Common Mode Input Range
Specified at 2.7V, 5V, and 10V
Typical Supply Current 25 μA at 5V
50 kHz Gain-Bandwidth at 5V
Similar to Popular LMC6462
Output to Within 20 mV of Supply Rail at 100k
Load
Good Capacitive Load Drive
APPLICATIONS
•
•
•
•
•
•
Mobile Communications
Portable Computing
Current Sensing for Battery Chargers
Voltage Reference Buffering
Sensor Interface
Stable Bias for GaAs RF Amps
Connection Diagram
Figure 1. 8-Pin PDIP
Top View
Figure 2. 5-Pin SOT-23
Top View
Figure 3. Actual Size
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated
LMC7111
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
ESD Tolerance
(3)
(1) (2)
SOT-23 Package
2000V
PDIP Package
1500V
Differential Input Voltage
±Supply Voltage
(V+) + 0.3V, (V−) − 0.3V
Voltage at Input/Output Pin
+
−
Supply Voltage (V − V )
11V
Current at Input Pin
Current at Output Pin
±5 mA
(4)
±30 mA
Current at Power Supply Pin
30 mA
Lead Temp. (Soldering, 10 sec.)
260°C
−65°C to +150°C
Storage Temperature Range
Junction Temperature
(1)
(5)
150°C
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
Human Body Model is 1.5 kΩ in series with 100 pF.
Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in
exceeding the maximum allowed junction temperature at 150°C.
The maximum power dissipation is a function of TJ(MAX), θJA and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJ(MAX) − TA)/θJA. All numbers apply for packages soldered directly into a PC board.
(2)
(3)
(4)
(5)
Operating Ratings
(1)
2.5V ≤ V+ ≤ 11V
Supply Voltage
−40°C ≤ TJ ≤ +85°C
Junction Temperature Range
LMC7111AI, LMC7111BI
Thermal Resistance (θJA)
8-Pin PDIP
115°C/W
5-Pin SOT-23
325°C/W
(1)
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not specified. For ensured specifications and the test
conditions, see the Electrical Characteristics.
2.7V DC Electrical Characteristics
Unless otherwise specified, all limits specified for TJ = 25°C, V+ = 2.7V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ. Boldface
limits apply at the temperature extremes.
Symbol
VOS
Parameter
Input Offset Voltage
Conditions
V+ = 2.7V
Typ
(1)
0.9
LMC7111AI
Limit (2)
LMC7111BI
Limit (2)
3
7
mV
5
9
max
TCVOS
Input Offset Voltage
Average Drift
IB
Input Bias Current
See
(3)
0.1
1
20
1
20
pA
max
IOS
Input Offset Current
See
(3)
0.01
0.5
10
0.5
10
pA
max
RIN
Input Resistance
+PSRR
Positive Power Supply
Rejection Ratio
2.7V ≤ V+ ≤5.0V,
V− = 0V, VO = 2.5V
60
55
50
55
50
dB
min
−PSRR
Negative Power Supply
Rejection Ratio
−2.7V ≤ V− ≤−5.0V,
V− = 0V, VO = 2.5V
60
55
50
55
50
dB
min
(1)
(2)
(3)
2
2.0
Units
μV/°C
Tera Ω
>10
Typical Values represent the most likely parametric norm.
All limits are specified by testing or statistical analysis.
Bias Current specified by design and processing.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
LMC7111
www.ti.com
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
2.7V DC Electrical Characteristics (continued)
Unless otherwise specified, all limits specified for TJ = 25°C, V+ = 2.7V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ. Boldface
limits apply at the temperature extremes.
Symbol
VCM
CIN
Parameter
Conditions
Input Common-Mode
Voltage Range
V+ = 2.7V
For CMRR ≥ 50 dB
LMC7111AI
Limit (2)
LMC7111BI
Limit (2)
Units
−0.10
0.0
0.40
0.0
0.40
V
min
2.8
2.7
2.25
2.7
2.25
V
max
Typ
Common-Mode Input
Capacitance
VO
3
+
Output Swing
V = 2.7V
RL = 100 kΩ
Output Short Circuit Current
AVOL
IS
Voltage Gain
Supply Current
pF
2.69
2.68
2.4
2.68
2.4
V
min
0.01
0.02
0.08
0.02
0.08
V
max
2.65
2.6
2.4
2.6
2.4
V
min
0.03
0.1
0.3
0.1
0.3
V
max
Sourcing, VO = 0V
7
1
0.7
1
0.7
mA
min
Sinking, VO = 2.7V
7
1
0.7
1
0.7
mA
min
V+ = 2.7V
RL = 10 kΩ
ISC
(1)
Sourcing
400
V/mv
min
Sinking
150
V/mv
min
V+ = +2.7V,
VO = V+/2
20
45
60
50
65
μA
max
2.7V AC Electrical Characteristics
Unless otherwise specified, all limits specified for TJ = 25°C, V+ = 2.7V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ. Boldface
limits apply at the temperature extremes.
Symbol
Parameter
SR
Slew Rate
GBW
Gain-Bandwidth Product
(1)
(2)
(3)
Conditions
See
(3)
Typ
(1)
LMC7111AI
Limit (2)
LMC7111BI
Limit (2)
Units
0.015
V/μs
40
kHz
Typical Values represent the most likely parametric norm.
All limits are specified by testing or statistical analysis.
Connected as Voltage Follower with 1.0V step input. Number specified is the slower of the positive and negative slew rates. Input
referred, V+ = 2.7V and RL = 100 kΩ connected to 1.35V. Amp excited with 1 kHz to produce VO = 1 VPP.
3V DC Electrical Characteristics
Unless otherwise specified, all limits specified for TJ = 25°C, V+ = 3V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ. Boldface
limits apply at the temperature extremes.
Symbol
VCM
(1)
(2)
Parameter
Input Common-Mode
Voltage Range
Conditions
V+ = 3V
For CMRR ≥ 50 dB
LMC7111AI
Limit (2)
LMC7111BI
Limit (2)
Units
−0.25
0.0
0.0
V
min
3.2
3.0
2.8
3.0
2.8
V
max
Typ
(1)
Typical Values represent the most likely parametric norm.
All limits are specified by testing or statistical analysis.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
3
LMC7111
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
www.ti.com
3.3V DC Electrical Characteristics
Unless otherwise specified, all limits specified for TJ = 25°C, V+ = 3.3V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ. Boldface
limits apply at the temperature extremes.
Symbol
VCM
(1)
(2)
Parameter
Input Common-Mode
Voltage Range
Conditions
V+ = 3.3V
For CMRR ≥ 50 dB
Typ (1)
LMC7111AI
Limit (2)
LMC7111BI
Limit (2)
Units
−0.25
−0.1
0.00
−0.1
0.00
V
min
3.5
3.4
3.2
3.4
3.2
V
max
Typical Values represent the most likely parametric norm.
All limits are specified by testing or statistical analysis.
5V DC Electrical Characteristics
Unless otherwise specified, all limits specified for TJ = 25°C, V+ = 5V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ. Boldface
limits apply at the temperature extremes.
Symbol
Parameter
Conditions
V+ = 5V
VOS
Input Offset Voltage
TCVOS
Input Offset Voltage
Average Drift
IB
Input Bias Current
IOS
Input Offset Current
RIN
Input Resistance
CMRR
Common Mode
Rejection Ratio
0V ≤ VCM ≤ 5V
+PSRR
Positive Power Supply
Rejection Ratio
−PSRR
VCM
4
0.9
mV
max
2.0
See (3)
Units
μV/°C
pA
max
0.01
0.5
10
0.5
10
pA
max
85
70
60
dB
min
5V ≤ V+ ≤10V,
V− = 0V, VO = 2.5V
85
70
60
dB
min
Negative Power Supply
Rejection Ratio
−5V ≤ V− ≤−10V,
V− = 0V, VO = −2.5V
85
70
60
dB
min
Input Common-Mode
Voltage Range
V+ = 5V
For CMRR ≥ 50 dB
−0.3
−0.20
0.00
−0.20
0.00
V
min
5.25
5.20
5.00
5.20
5.00
V
max
Output Swing
(1)
(2)
(3)
LMC7111BI
Limit (2)
1
20
VO
IS
LMC7111AI
Limit (2)
1
20
Common-Mode Input
Capacitance
Output Short Circuit Current
AVOL
(1)
0.1
CIN
ISC
Typ
Voltage Gain
Supply Current
See
(3)
Tera Ω
>10
3
pF
V+ = 5V
RL = 100 kΩ
4.99
4.98
4.98
Vmin
0.01
0.02
0.02
Vmax
V+ = 5V
RL = 10 kΩ
4.98
4.9
4.9
Vmin
0.02
0.1
0.1
Vmin
Sourcing, VO = 0V
7
5
3.5
5
3.5
mA
min
Sinking, VO = 3V
7
5
3.5
5
3.5
mA
min
Sourcing
500
V/mv
min
Sinking
200
V/mv
min
V+ = +5V,
VO = V+/2
25
μA
max
Typical Values represent the most likely parametric norm.
All limits are specified by testing or statistical analysis.
Bias Current specified by design and processing.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
LMC7111
www.ti.com
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
5V AC Electrical Characteristics
Unless otherwise specified, all limits specified for TJ = 25°C, V+ = 5V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ. Boldface
limits apply at the temperature extremes.
Symbol
Parameter
Typ
Positive Going Slew Rate (3)
SR
Slew Rate
GBW
Gain-Bandwidth Product
(1)
(2)
(3)
Conditions
(1)
0.027
LMC7111AI
Limit (2)
LMC7111BI
Limit (2)
Units
0.015
0.010
V/μs
50
kHz
Typical Values represent the most likely parametric norm.
All limits are specified by testing or statistical analysis.
Connected as Voltage Follower with 1.0V step input. Number specified is the slower of the positive slew rate. The negative slew rate is
faster. Input referred, V+ = 5V and RL = 100 kΩ connected to 1.5V. Amp excited with 1 kHz to produce VO = 1 VPP.
10V DC Electrical Characteristics
Unless otherwise specified, all limits specified for TJ = 25°C, V+ = 10V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ. Boldface
limits apply at the temperature extremes.
Symbol
Parameter
Conditions
V+ = 10V
Typ
(1)
LMC7111BI
Limit (2)
Units
3
5
7
9
mV
max
VOS
Input Offset Voltage
TCVOS
Input Offset Voltage
Average Drift
2.0
IB
Input Bias Current
0.1
1
20
1
20
pA
max
IOS
Input Offset Current
0.01
0.5
10
0.5
10
pA
max
RIN
Input Resistance
>10
Tera Ω
+PSRR
Positive Power Supply
Rejection Ratio
5V ≤ V+ ≤10V,
V− = 0V, VO = 2.5V
80
dB
min
−PSRR
Negative Power Supply
Rejection Ratio
−5V ≤ V− ≤−10V,
V− = 0V, VO = 2.5V
80
dB
min
VCM
Input Common-Mode
Voltage Range
V+ = 10V
For CMRR ≥ 50 dB
−0.2
−0.15
0.00
−0.15
0.00
V
min
10.2
10.15
10.00
10.15
10.00
V
max
CIN
Common-Mode Input
Capacitance
ISC
Output Short Circuit Current
AVOL
Voltage Gain
100 kΩ Load
0.9
LMC7111AI
Limit (2)
μV/°C
3
(3)
pF
Sourcing, VO = 0V
30
20
7
20
7
mA
min
Sinking, VO = 10V
30
20
7
20
7
mA
min
Sourcing
500
V/mv
min
Sinking
200
V/mv
min
IS
Supply Current
V+ = +10V,
VO = V+/2
25
50
65
60
75
VO
Output Swing
V+ = 10V
RL = 100 kΩ
9.99
9.98
9.98
Vmin
0.01
0.02
0.02
Vmax
V+ = 10V
RL = 10 kΩ
9.98
9.9
9.9
Vmin
0.02
0.1
0.1
Vmin
(1)
(2)
(3)
μA
max
Typical Values represent the most likely parametric norm.
All limits are specified by testing or statistical analysis.
Bias Current specified by design and processing.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
5
LMC7111
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
www.ti.com
10V AC Electrical Characteristics
Unless otherwise specified, all limits specified for TJ = 25°C, V+ = 10V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ. Boldface
limits apply at the temperature extremes.
Symbol
Parameter
Conditions
(3)
LMC7111AI
Limit (2)
LMC7111BI
Limit (2)
Units
SR
Slew Rate
0.03
V/μs
GBW
Gain-Bandwidth Product
50
kHz
φm
Phase Margin
50
deg
Gm
Gain Margin
15
dB
(1)
(2)
(3)
6
See
Typ (1)
Input-Referred
Voltage Noise
f = 1 kHz
VCM = 1V
110
Input-Referred
Current Noise
f = 1 kHz
0.03
nV/ √Hz
pA/√Hz
Typical Values represent the most likely parametric norm.
All limits are specified by testing or statistical analysis.
Connected as Voltage Follower with 1.0V step input. Number specified is the slower of the positive and negative slew rates. Input
referred, V+ = 10V and RL = 100 kΩ connected to 5V. Amp excited with 1 kHz to produce VO = 2 VPP.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
LMC7111
www.ti.com
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
Typical Performance Characteristics
TA = 25°C unless specified, Single Supply
Supply Current
vs.
Supply Voltage
Voltage Noise
vs.
Frequency
Figure 4.
Figure 5.
2.7V Performance
Offset Voltage
vs.
Common Mode Voltage @ 2.7V
Sinking Output
vs.
Output Voltage
Figure 6.
Figure 7.
Sourcing Output
vs.
Output Voltage
Gain and Phase
vs.
Capacitive Load @ 2.7V
Figure 8.
Figure 9.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
7
LMC7111
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
www.ti.com
2.7V Performance (continued)
Gain and Phase
vs.
Capacitive Load @ 2.7V
Gain and Phase
vs.
Capacitive Load @ 2.7V
Figure 10.
Figure 11.
3V Performance
8
Voltage Noise
vs.
Common Mode Voltage @ 3V
Output Voltage
vs.
Input Voltage @ 3V
Figure 12.
Figure 13.
Offset Voltage
vs.
Common Mode Voltage @ 3V
Sourcing Output
vs.
Output Voltage
Figure 14.
Figure 15.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
LMC7111
www.ti.com
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
3V Performance (continued)
Sinking Output
vs.
Output Voltage
Gain and Phase
vs.
Capacitive Load @ 3V
Figure 16.
Figure 17.
Gain and Phase
vs.
Capacitive Load @ 3V
Gain and Phase
vs.
Capacitive Load @ 3V
Figure 18.
Figure 19.
5V Performance
Voltage Noise
vs.
Common Mode Voltage @ 5V
Output Voltage
vs.
Input Voltage @ 5V
Figure 20.
Figure 21.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
9
LMC7111
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
www.ti.com
5V Performance (continued)
10
Offset Voltage
vs.
Common Mode Voltage @ 5V
Sourcing Output
vs.
Output Voltage
Figure 22.
Figure 23.
Sinking Output
vs.
Output Voltage
Gain and Phase
vs.
Capacitive Load @ 5V
Figure 24.
Figure 25.
Gain and Phase
vs.
Capacitive Load @ 5V
Gain and Phase
vs.
Capacitive Load @ 5V
Figure 26.
Figure 27.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
LMC7111
www.ti.com
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
5V Performance (continued)
Non-Inverting
Small Signal Pulse Response
at 5V
Non-Inverting
Small Signal Pulse Response
at 5V
Figure 28.
Figure 29.
Non-Inverting
Small Signal Pulse Response
at 5V
Non-Inverting
Large Signal Pulse Response
at 5V
Figure 30.
Figure 31.
Non-Inverting
Large Signal Pulse Response
at 5V
Non-Inverting
Large Signal Pulse Response
at 5V
Figure 32.
Figure 33.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
11
LMC7111
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
www.ti.com
5V Performance (continued)
12
Inverting
Small Signal Pulse Response
at 5V
Inverting
Small Signal Pulse Response
at 5V
Figure 34.
Figure 35.
Inverting
Small Signal Pulse Response
at 5V
Inverting
Large Signal Pulse Response
at 5V
Figure 36.
Figure 37.
Inverting
Large Signal Pulse Response
at 5V
Inverting
Large Signal Pulse Response
at 5V
Figure 38.
Figure 39.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
LMC7111
www.ti.com
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
10V Performance
Voltage Noise
vs.
Common Mode Voltage @ 10V
Output Voltage
vs.
Input Voltage @ 10V
Figure 40.
Figure 41.
Offset Voltage
vs.
Common Mode Voltage @ 10V
Sourcing Output
vs.
Output Voltage
Figure 42.
Figure 43.
Sinking Output
vs.
Output Voltage
Gain and Phase
vs.
Capacitive Load @ 10V
Figure 44.
Figure 45.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
13
LMC7111
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
www.ti.com
10V Performance (continued)
14
Gain and Phase
vs.
Capacitive Load @ 10V
Gain and Phase
vs.
Capacitive Load @ 10V
Figure 46.
Figure 47.
Non-Inverting
Small Signal Pulse Response
at 10V
Non-Inverting
Large Signal Pulse Response
at 10V
Figure 48.
Figure 49.
Inverting
Small Signal Pulse Response
at 10V
Inverting
Large Signal Pulse Response
at 10V
Figure 50.
Figure 51.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
LMC7111
www.ti.com
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
APPLICATION INFORMATION
BENEFITS OF THE LMC7111 TINY AMP
Size
The small footprint of the SOT-23 packaged Tiny amp, (0.120 x 0.118 inches, 3.05 x 3.00 mm) saves space on
printed circuit boards, and enable the design of smaller electronic products. Because they are easier to carry,
many customers prefer smaller and lighter products.
Height
The height (0.056 inches, 1.43 mm) of the Tiny amp makes it possible to use it in PCMCIA type III cards.
Signal Integrity
Signals can pick up noise between the signal source and the amplifier. By using a physically smaller amplifier
package, the Tiny amp can be placed closer to the signal source, reducing noise pickup and increasing signal
integrity. The Tiny amp can also be placed next to the signal destination, such as a buffer for the reference of an
analog to digital converter.
Simplified Board Layout
The Tiny amp can simplify board layout in several ways. First, by placing an amp where amps are needed,
instead of routing signals to a dual or quad device, long pc traces may be avoided.
By using multiple Tiny amps instead of duals or quads, complex signal routing and possibly crosstalk can be
reduced.
DIPs available for prototyping
LMC7111 amplifiers packaged in conventional 8-pin dip packages can be used for prototyping and evaluation
without the need to use surface mounting in early project stages.
Low Supply Current
The typical 25 μA supply current of the LMC7111 extends battery life in portable applications, and may allow the
reduction of the size of batteries in some applications.
Wide Voltage Range
The LMC7111 is characterized at 2.7V, 3V, 3.3V, 5V and 10V. Performance data is provided at these popular
voltages. This wide voltage range makes the LMC7111 a good choice for devices where the voltage may vary
over the life of the batteries.
INPUT COMMON MODE VOLTAGE RANGE
The LMC7111 does not exhibit phase inversion when an input voltage exceeds the negative supply voltage.
The absolute maximum input voltage is 300 mV beyond either rail at room temperature. Voltages greatly
exceeding this maximum rating can cause excessive current to flow in or out of the input pins, adversely affecting
reliability.
Applications that exceed this rating must externally limit the maximum input current to ±5 mA with an input
resistor as shown in Figure 52.
Figure 52. RI Input Current Protection for
Voltages Exceeding the Supply Voltage
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
15
LMC7111
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
www.ti.com
CAPACITIVE LOAD TOLERANCE
The LMC7111 can typically directly drive a 300 pF load with VS = 10V at unity gain without oscillating. The unity
gain follower is the most sensitive configuration. Direct capacitive loading reduces the phase margin of op-amps.
The combination of the op-amp's output impedance and the capacitive load induces phase lag. This results in
either an underdamped pulse response or oscillation.
Capacitive load compensation can be accomplished using resistive isolation as shown in Figure 53. This simple
technique is useful for isolating the capacitive input of multiplexers and A/D converters.
Figure 53. Resistive Isolation
of a 330 pF Capacitive Load
COMPENSATING FOR INPUT CAPACITANCE WHEN USING LARGE VALUE FEEDBACK
RESISTORS
When using very large value feedback resistors, (usually > 500 kΩ) the large feed back resistance can react with
the input capacitance due to transducers, photodiodes, and circuit board parasitics to reduce phase margins.
The effect of input capacitance can be compensated for by adding a feedback capacitor. The feedback capacitor
(as in Figure 54), Cf is first estimated by:
(1)
or
R1 CIN ≤ R2 Cf
(2)
which typically provides significant overcompensation.
Printed circuit board stray capacitance may be larger or smaller than that of a breadboard, so the actual optimum
value for CF may be different. The values of CF should be checked on the actual circuit. (Refer to the LMC660
quad CMOS amplifier data sheet for a more detailed discussion.)
Figure 54. Cancelling the Effect of Input Capacitance
OUTPUT SWING
The output of the LMC7111 will go to within 100 mV of either power supply rail for a 10 kΩ load and to 20 mV of
the rail for a 100 kΩ load. This makes the LMC7111 useful for driving transistors which are connected to the
same power supply. By going very close to the supply, the LMC7111 can turn the transistors all the way on or all
the way off.
16
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
LMC7111
www.ti.com
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
BIASING GaAs RF AMPLIFIERS
The capacitive load capability, low current draw, and small size of the SOT-23 LMC7111 make it a good choice
for providing a stable negative bias to other integrated circuits.
The very small size of the LMC7111 and the LM4040 reference take up very little board space.
CF and Risolation prevent oscillations when driving capacitive loads.
Figure 55. Stable Negative Bias
REFERENCE BUFFER FOR A-TO-D CONVERTERS
The LMC7111 can be used as a voltage reference buffer for analog-to-digital converters. This works best for Ato-D converters whose reference input is a static load, such as dual slope integrating A-to-Ds. Converters whose
reference input is a dynamic load (the reference current changes with time) may need a faster device, such as
the LMC7101 or the LMC7131.
The small size of the LMC7111 allows it to be placed close to the reference input. The low supply current (25 μA
typical) saves power.
For A-to-D reference inputs which require higher accuracy and lower offset voltage, please see the LMC6462
datasheet. The LMC6462 has performance similar to the LMC7111. The LMC6462 is available in two grades with
reduced input voltage offset.
DUAL AND QUAD DEVICES WITH SIMILAR PERFORMANCE
The LMC6462 and LMC6464 are dual and quad devices with performance similar to the LMC7111. They are
available in both conventional through-hole and surface mount packaging. Please see the LMC6462/4 datasheet
for details.
SPICE MACROMODEL
A SPICE macromodel is available for the LMC7111. This model includes simulation of:
• Input common-mode voltage range
• Frequency and transient response
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
17
LMC7111
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
•
•
www.ti.com
Quiescent and dynamic supply current
Output swing dependence on loading conditions and many more characteristics as listed on the macro model
disk. Visit the LMC7111 product page on http://www.ti.com for the spice model.
ADDITIONAL SOT-23 TINY DEVICES
Additional parts are available in the space saving SOT-23 Tiny package, including amplifiers, voltage references,
and voltage regulators. These devices include—
LMC7101 1 MHz gain-bandwidth rail-to-rail input and output amplifier—high input impedance and high gain, 700
μA typical current 2.7V, 3V, 5V and 15V specifications.
LM7131 Tiny Video amp with 70 MHz gain bandwidth. Specified at 3V, 5V and ± 5V supplies.
LMC7211 Comparator in a tiny package with rail-to-rail input and push-pull output. Typical supply current of 7
μA. Typical propagation delay of 7 μs. Specified at 2.7V, 5V and 15V supplies.
LMC7221 Comparator with an open drain output for use in mixed voltage systems. Similar to the LMC7211,
except the output can be used with a pull-up resistor to a voltage different than the supply voltage.
LP2980 Micropower SOT 50 mA Ultra Low-Dropout Regulator.
LM4040 Precision micropower shunt voltage reference. Fixed voltages of 2.5000V, 4.096V, 5.000V, 8.192V and
10.000V.
LM4041 Precision micropower shunt voltage reference 1.225V and adjustable.
Visit http://www.ti.com for more information.
18
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
LMC7111
www.ti.com
SNOS753E – AUGUST 1999 – REVISED MARCH 2013
REVISION HISTORY
Changes from Revision D (March 2013) to Revision E
•
Page
Changed layout of National Data Sheet to TI format .......................................................................................................... 18
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LMC7111
19
PACKAGE OPTION ADDENDUM
www.ti.com
18-Nov-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
LMC7111BIM5
NRND
SOT-23
DBV
5
1000
Non-RoHS &
Non-Green
Call TI
Call TI
-40 to 85
A01B
LMC7111BIM5/NOPB
ACTIVE
SOT-23
DBV
5
1000
RoHS & Green
SN
Level-1-260C-UNLIM
-40 to 85
A01B
LMC7111BIM5X
NRND
SOT-23
DBV
5
3000
Non-RoHS
& Green
Call TI
Level-1-260C-UNLIM
-40 to 85
A01B
LMC7111BIM5X/NOPB
ACTIVE
SOT-23
DBV
5
3000
RoHS & Green
SN
Level-1-260C-UNLIM
-40 to 85
A01B
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
工商网监
湘ICP备2023018690号
