LMH0046MHX

LMH0046 www.ti.com SNLS222F – APRIL 2006 – REVISED APRIL 2013 LMH0046 HD/SD SDI Reclocker With Dual Differential Outputs Check for Samples: LMH0046 FEATURES DESCRIPTION • The LMH0046 HD/SD SDI Reclocker retimes serial digital video data conforming to the SMPTE 292M and SMPTE 259M (A & C) standards. The LMH0046 operates at serial data rates of 143 Mbps, 270 Mbps, 1.483 Gbps and 1.485 Gbps. The LMH0046 supports DVB-ASI operation at 270 Mbps. 1 2 • • • • • • • • • • • • • • • • Supports SMPTE 292M and SMPTE 259M (A & C) Serial Digital Video Standards Supports 143 Mbps, 270 Mbps, 1.483 Gbps, and 1.485 Gbps Serial Data Rate Operation Supports DVB-ASI at 270 Mbps Single 3.3V Supply Operation 330 mW Typical Power Consumption Two Differential, Reclocked Outputs Choice of Second Reclocked Output or LowJitter, Differential, Data-Rate Clock Output Single 27 MHz External Crystal or Reference Clock Input Manual Rate Select Input SD/HD Operating Rate Indicator Output Lock Detect Indicator Output Output Mute Function for Data and Clock Auto/Manual Reclocker Bypass Differential LVPECL Compatible Serial Data Inputs and Outputs LVCMOS Control Inputs and Indicator Outputs 20-Pin HTSSOP Package Industrial Temperature Range: -40°C to +85°C The LMH0046 automatically detects the incoming data rate and adjusts itself to retime the incoming data to suppress accumulated jitter. The LMH0046 recovers the serial data-rate clock and optionally provides it as an output. The LMH0046 has two differential serial data outputs; the second output may be selected as a low-jitter, data-rate clock output. Controls and indicators are: serial clock or second serial data output select, manual rate select input, SD/HD rate indicator output, lock detect output, auto/manual data bypass and output mute. The serial data inputs, outputs, and serial data-rate clock outputs are differential LVPECL compatible. The CML serial data and serial data-rate clock outputs are suitable for driving 100Ω differentially terminated networks. The control logic inputs and outputs are LVCMOS compatible. The LMH0046 is powered from a single 3.3V supply. Power dissipation is typically 330 mW. The device is housed in a 20-pin HTSSOP package. APPLICATIONS • SDTV/HDTV Serial Digital Video Interfaces For: – Digital Video Routers and Switchers – Digital Video Processing and Editing Equipment – DVB-ASI Equipment – Video Standards and Format Converters 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2006–2013, Texas Instruments Incorporated LMH0046 SNLS222F – APRIL 2006 – REVISED APRIL 2013 www.ti.com Typical Application CABLE EQUALIZER LMH0034 HD/SD RECLOCKER LMH0046 SERIAL DATA CABLE EQUALIZER LMH0034 HD/SD SERIALIZER LMH0030 HD/SD CROSSPOINT SWITCH CLC018 8x8 SD SERIALIZER CLC021A HD/SD RECLOCKER LMH0046 HD/SD RECLOCKER LMH0046 HD/SD RECLOCKER LMH0046 HD/SD DESERIALIZER LMH0031 CABLE DRIVER LMH0302 CABLE DRIVER LMH0302 PARALLEL DATA SERIAL DATA CABLE DRIVER LMH0302 PARALLEL DATA Figure 1. 1.485 Gbps Signal Before Reclocking (0.75 UI Jitter) 2 Figure 2. 1.485 Gbps Signal After Reclocking (0.05 UI Jitter) Submit Documentation Feedback Copyright © 2006–2013, Texas Instruments Incorporated Product Folder Links: LMH0046 LMH0046 www.ti.com SNLS222F – APRIL 2006 – REVISED APRIL 2013 Block Diagram SCO_EN BYPASS/ AUTO BYPASS RATE0 SD/ HD CONTROL LOGIC LOCK DETECT RATE1 VCCO BYPASS 50 50 XTAL IN/EXT CLK XTAL OUT LOOP FILTER 1 SCO/SDO2 VCO / PLL SCO/SDO2 LOOP FILTER 2 VCCO O/P MUTE 50 50 SDO SDI SDI RETIMER / FIFO SDO Connection Diagram 1 2 3 4 5 6 7 8 9 10 20 SCO_EN 19 SD/ HD 18 V RATE0 CCO 17 SDO RATE1 16 SDO SDI LMH0046 VCCO 15 SDI 14 VCC SCO/SDO2 13 SCO/SDO2 BP/ AUTO-BP 12 OP MUTE LOCK DET 11 XTAL IN/EXT CLK XTAL OUT LF1 LF2 The exposed die attach pad is the negative electrical terminal for this device. It must be connected to the negative power supply voltage. Figure 3. 20-Pin HTSSOP See PWP0020A Package Submit Documentation Feedback Copyright © 2006–2013, Texas Instruments Incorporated Product Folder Links: LMH0046 3 LMH0046 SNLS222F – APRIL 2006 – REVISED APRIL 2013 www.ti.com Table 1. PIN DESCRIPTIONS Pin Description LF1 Loop Filter 2 LF2 Loop Filter 3 RATE 0 Data Rate Select Input 4 RATE 1 Data Rate Select Input 5 SDI Data Input True 6 SDI Data Input Complement 7 VCC Positive power supply input 8 BYPASS/AUTO BYPASS Bypass/Auto Bypass mode select 9 OUTPUT MUTE Data and Clock Output Mute Input (active low) 10 XTAL IN/EXT CLK Crystal or External Oscillator Input 11 XTAL OUT Crystal Oscillator Output 12 LOCK DETECT PLL Lock Detect Output (active high) 13 SCO/SDO2 Serial Clock or Serial Data Output 2 Complement 14 SCO/SDO2 Serial Clock or Serial Data Output 2 True 15 VCCO Positive power supply input (Output Driver) 16 SDO Data Output Complement 17 SDO Data Output True 18 VCCO Positive power supply input (Output Driver) 19 SD/HD Data Rate Range Output 20 SCO_EN Serial Clock or Serial Data 2 Output select (active high enables serial clock output) VEE Connect exposed DAP to negative power supply (ground) DAP 4 Name 1 Submit Documentation Feedback Copyright © 2006–2013, Texas Instruments Incorporated Product Folder Links: LMH0046 LMH0046 www.ti.com SNLS222F – APRIL 2006 – REVISED APRIL 2013 These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings (1) (2) Supply Voltage (VCC–VEE) 4.0V VEE−0.15V to VCC+0.15V Logic Supply Voltage (Vi) Logic Input Current (single input): Vi = VEE−0.15V −5 mA Vi = VCC+0.15V +5 mA VEE−0.15V to VCC+0.15V Logic Output Voltage (Vo) Logic Output Source/Sink Current ±8 mA VCC to VCC−2.0V Serial Data Input Voltage (VSDI) Serial Data Output Sink Current (ISDO) Package Thermal Resistance, HTSSOP 24 mA θJA θJC 26.6°C/W 2.4°C/W −65°C to +150°C Storage Temp. Range Junction Temperature +150°C Lead Temperature (Soldering 4 Sec) +260°C (Pb-free) ESD Rating (HBM) 7 kV ESD Rating (MM) 350V ESD Rating (CDM) (1) (2) 1250V “Absolute Maximum Ratings” are those parameter values beyond which the life and operation of the device cannot be ensured. The stating herein of these maximums shall not be construed to imply that the device can or should be operated at or beyond these values. The table of “Electrical Characteristics” specifies acceptable device operating conditions. It is anticipated that this device will not be offered in a military qualified version. If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and specifications. Recommended Operating Conditions Supply Voltage (VCC–VEE) 3.3V ±5% Logic Input Voltage VEE to VCC Differential Serial Input Voltage 800 mV ±10% Serial Data or Clock Output Sink Current (ISO) 16 mA max. −40°C to +85°C Operating Free Air Temperature (TA) Submit Documentation Feedback Copyright © 2006–2013, Texas Instruments Incorporated Product Folder Links: LMH0046 5 LMH0046 SNLS222F – APRIL 2006 – REVISED APRIL 2013 www.ti.com DC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified. (1) (2) Symbol (1) (2) Parameter Conditions Reference Logic inputs Min Typ Max Units 2 VCC V VEE 0.8 V VIH Input Voltage High Level VIL Input Voltage Low Level IIH Input Current High Level VIH = VCC 1 65 µA IIL Input Current Low Level VIL = VEE −1 −25 µA VOH Output Voltage High Level IOH = −2 mA VOL Output Voltage Low Level Logic outputs 2 V IOL = +2 mA VSDID Serial Input Voltage, Differential SDI VCMI Input Common Mode Voltage VSDOD Serial Output Voltage, Differential 100Ω differential load VCMO Output Common Mode Voltage 100Ω differential load ICC Power Supply Current, 3.3V supply, Total 1485 Mbps, NTSC color bar pattern SDO, SCO VEE + 0.6 V 200 1600 mVP-P VCC−1.6 VCC−0.2 V 880 mVP-P 720 800 VCC − VSDOD V 100 mA Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are referenced to VEE (equal to zero volts). Typical values are stated for: VCC = +3.3V, TA = +25°C. AC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified. (1) Symbol SMPTE 259M, A BRSD Serial Data Rate SMPTE 259M, C BRSD Serial Data Rate SMPTE 292M TOLJIT Serial Input Jitter Tolerance 143 or 270 Mbps (2) (3) (4) TOLJIT Serial Input Jitter Tolerance 143 or 270 Mbps (2) (5) (6) TOLJIT Serial Input Jitter Tolerance 1483 or 1485 Mbps (2) (5) Reference Min SDI, SDO SDI Typ Max Units 143 Mbps 270 Mbps 1483, 1485 Mbps >6 UIP-P >0.6 UIP-P >6 UIP-P >0.6 UIP-P (3) (2) (5) (6) Serial Input Jitter Tolerance 1483 or 1485 Mbps tJIT Serial Data Output Jitter 143 Mbps (5) (7) 0.02 0.08 UIP-P tJIT Serial Data Output Jitter 270 Mbps (5) (7) 0.02 0.08 UIP-P tJIT Serial Data Output Jitter 1483 or 1485 Mbps (5) (7) 0.05 0.1 UIP-P Loop Bandwidth 270 Mbps,