LT1004CPWE4-2-5

LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 D Initial Accuracy D D D D − ±4 mV for LT1004-1.2 − ±20 mV for LT1004-2.5 Micropower Operation Operates up to 20 mA Very Low Reference Impedance Applications: − Portable Meter Reference − Portable Test Instruments − Battery-Operated Systems − Current-Loop Instrumentation D OR PW PACKAGE (TOP VIEW) NC NC NC ANODE 1 8 2 7 3 6 4 5 CATHODE NC CATHODE NC NC − No internal connection Terminals 6 and 8 are internally connected. LP PACKAGE (TOP VIEW) description/ordering information ANODE The LT1004 micropower voltage reference is a two-terminal band-gap reference diode designed to provide high accuracy and excellent temperature characteristics at very low operating currents. Optimizing the key parameters in the design, processing, and testing of the device results in specifications previously attainable only with selected units. CATHODE NC NC − No internal connection The LT1004 is a pin-for-pin replacement for the LM285 and LM385 series of references, with improved specifications. It is an excellent device for use in systems in which accuracy previously was attained at the expense of power consumption and trimming. The LT1004C is characterized for operation from 0°C to 70°C. The LT1004I is characterized for operation from −40°C to 85°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2008, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 description/ordering information (continued) ORDERING INFORMATION{ TA VZ TYP ORDERABLE PART NUMBER PACKAGE‡ SOIC (D) 12V 1.2 TSSOP (PW) 0°C to 70°C SOIC (D) 25V 2.5 TSSOP (PW) SOIC (D) 12V 1.2 TSSOP (PW) −40°C 40°C to 85°C SOIC (D) 25V 2.5 TSSOP (PW) Tube of 75 LT1004CD-1-2 Reel of 2500 LT1004CDR-1-2 Tube of 150 LT1004CPW-1-2 Reel of 2000 LT1004CPWR-1-2 Tube of 75 LT1004CD-2-5 Reel of 2500 LT1004CDR-2-5 Tube of 150 LT1004CPW-2-5 Reel of 2000 LT1004CPWR-2-5 Tube of 75 LT1004ID-1-2 Reel of 2500 LT1004IDR-1-2 Tube of 150 LT1004IPW-1-2 Reel of 2000 LT1004IPWR-1-2 Tube of 75 LT1004ID-2-5 Reel of 2500 LT1004IDR-2-5 Tube of 150 LT1004IPW-2-5 Reel of 2000 LT1004IPWR-2-5 † TOP-SIDE MARKING 4C 12 4C-12 4C 12 4C-12 4C 25 4C-25 4C 25 4C-25 4I 12 4I-12 4I 12 4I-12 4I 25 4I-25 4I 25 4I-25 For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at http://www.ti.com. ‡ Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging. symbol ANODE (A) 2 POST OFFICE BOX 655303 CATHODE (K) • DALLAS, TEXAS 75265 LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 schematic LT1004-1.2 CATHODE Q12 7.5 kΩ Q3 200 kΩ Q11 Q4 Q2 Q10 Q1 20 pF 20 pF 50 kΩ Q9 600 kΩ 300 kΩ 500 kΩ Q5 Q8 500 Ω Q6 Q13 Q7 60 kΩ ANODE LT1004-2.5 CATHODE Q12 7.5 kΩ 200 kΩ Q11 Q3 Q4 Q2 500 kΩ Q10 Q1 20 pF 20 pF 50 kΩ 600 kΩ Q9 300 kΩ 500 kΩ Q5 Q8 500 Ω Q6 Q7 Q13 500 kΩ 60 kΩ ANODE NOTE A: All component values shown are nominal. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Reverse current, IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA Forward current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA Package thermal impedance, θJA (see Notes 1 and 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . 149°C/W Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions TA LT1004C Operating free free-air air temperature LT1004I MIN MAX 0 70 −40 85 UNIT °C electrical characteristics at specified free-air temperature PARAMETER TEST CONDITIONS TA‡ 25°C VZ aV Reference voltage Z IZ = 100 µA Average temperature coefficient of reference voltage§ IZ = 10 µA Change in reference voltage with current IZ = IZ(min) to 1 mA Full range LT1004-1.2 MIN TYP MAX MIN TYP MAX 1.231 1.235 1.239 2.48 2.5 2.52 LT1004C 1.225 1.245 2.47 2.53 LT1004I 1.225 1.245 2.47 2.53 ‡ § 4 UNIT V 20 25°C IZ = 20 µA ppm/°C 20 25°C ∆VZ LT1004-2.5 IZ = 1 mA to 20 mA ∆VZ/∆t Long-term change in reference voltage IZ(min) Minimum reference current zz Reference impedance IZ = 100 µA A Vn Broadband noise voltage IZ = 100 µA, f = 10 Hz to 10 kHz IZ = 100 µA 1 1 Full range 1.5 1.5 25°C 10 10 Full range 20 20 25°C 20 Full range 8 10 12 20 0.2 0.6 0.2 0.6 25°C Full range 25°C 20 1.5 60 ppm/khr 1.5 120 mV µA Ω µV Full range is 0°C to 70°C for the LT1004C and −40°C to 85°C for the LT1004I. The average temperature coefficient of reference voltage is defined as the total change in reference voltage divided by the specified temperature range. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 TYPICAL CHARACTERISTICS Table of Graphs GRAPH TITLE FIGURE LT1004x-1.2 Reverse current vs Reverse voltage 1 Reference-voltage change vs Reverse current 2 Forward voltage vs Forward current 3 Reference voltage vs Free-air temperature 4 Reference impedance vs Reference current 5 Noise voltage vs Frequency 6 Filtered output noise voltage vs Cutoff frequency 7 LT1004x-2.5 Transient response 8 Reverse current vs Reverse voltage 9 Forward voltage vs Forward current 10 Reference voltage vs Free-air temperature 11 Reference impedance vs Reference current 12 Noise voltage vs Frequency 13 Filtered output noise voltage vs Cutoff frequency 14 Transient response 15 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 TYPICAL CHARACTERISTICS† LT1004x-1.2 LT1004x-1.2 REVERSE CURRENT vs REVERSE VOLTAGE REFERENCE-VOLTAGE CHANGE vs REVERSE CURRENT ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ 16 100 ∆V Z − Reference Voltage Change − mV I R − Reverse Current − µ A 10 1 0.2 0.4 0.6 0.8 1 1.2 12 8 4 0 −4 0.01 0.1 0 ÎÎÎÎÎÎ ÎÎÎÎÎÎ TA = −55°C to 125°C TA = −55°C to 125°C 1.4 0.1 10 100 IR − Reverse Current − mA VR − Reverse Voltage − V Figure 1 Figure 2 LT1004x-1.2 LT1004x-1.2 FORWARD VOLTAGE vs FORWARD CURRENT REFERENCE VOLTAGE vs FREE-AIR TEMPERATURE ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎ 1.245 1.2 IZ = 100 µA TA = 25°C V Z − Reference Voltage − V 1 V F − Forward Voltage − V 1 0.8 0.6 0.4 1.24 1.235 1.23 0.2 1.225 0 0.01 0.1 1 10 100 −55 −35 −15 Figure 3 6 25 45 65 85 105 125 TA − Free-Air Temperature − °C IF − Forward Current − mA † 5 Figure 4 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 TYPICAL CHARACTERISTICS† LT1004x-1.2 LT1004x-1.2 REFERENCE IMPEDANCE vs REFERENCE CURRENT NOISE VOLTAGE vs FREQUENCY ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ 100 700 600 Vn − Noise Voltage − nV/ Hz z z − Reference Impedance − Ω f = 25 Hz TA = −55°C to 125°C 10 1 ÎÎÎÎ ÎÎÎÎ IZ = 100 µA TA = 25°C 500 400 300 200 100 0.1 0.01 0.1 1 10 0 10 100 100 1k 10 k 100 k f − Frequency − Hz IZ − Reference Current − mA Figure 5 Figure 6 TL1004x-1.2 FILTERED OUTPUT NOISE VOLTAGE vs CUTOFF FREQUENCY 60 50 ÎÎÎÎÎ ÎÎÎÎÎ 40 IZ = 100 µA TA = 25°C ÎÎÎÎÎ ÎÎÎÎÎ 100 µA R C 30 20 10 0 0.1 2 RC Low Pass Input and Output Voltages − V Filtered Output Noise Voltage − µV 70 LT1004x-1.2 TRANSIENT RESPONSE Output 1 36 kΩ 0 ÎÎÎ 5 Input 0 1 10 VO VI 0.5 100 0 100 500 600 t − Time − µs Cutoff Frequency − kHz Figure 7 † ÎÎÎÎ 1.5 Figure 8 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 TYPICAL CHARACTERISTICS† 100 LT1004x-2.5 LT1004x-2.5 REVERSE CURRENT vs REVERSE VOLTAGE FORWARD VOLTAGE vs FORWARD CURRENT 1.2 ÎÎÎÎÎÎ 1 V F − Forward Voltage − V I R − Reverse Current − µ A ÎÎÎÎ ÎÎÎÎ TA = 25°C TA = −55°C to 125°C 10 1 0.8 0.6 0.4 0.2 0 0.1 0 0.5 1 1.5 2 2.5 0.1 0.01 3 VR − Reverse Voltage − V 1 10 IF − Forward Current − mA Figure 9 Figure 10 LT1004x-2.5 REFERENCE VOLTAGE vs FREE-AIR TEMPERATURE 2.52 ÎÎÎÎÎ ÎÎÎÎÎ IZ = 100 µA V Z − Reference Voltage − V 2.515 2.51 2.505 2.5 2.495 2.49 2.485 2.48 2.475 −55 −35 −15 5 25 45 65 85 105 125 TA − Free-Air Temperature − °C Figure 11 † 8 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 100 LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 TYPICAL CHARACTERISTICS† 1000 LT1004x-2.5 LT1004x-2.5 REFERENCE IMPEDANCE vs REFERENCE CURRENT NOISE VOLTAGE vs FREQUENCY ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ 1400 100 1200 Vn − Noise Voltage − nV/ Hz z z − Reference Impedance − Ω f = 25 Hz TA = −55°C to 125°C 10 1 ÎÎÎÎ ÎÎÎÎ IZ = 100 µA TA = 25°C 1000 800 600 400 200 0.1 0.01 0.1 1 10 0 10 100 100 1k 10 k 100 k f − Frequency − Hz IZ − Reference Current − mA Figure 12 Figure 13 TL1004x-2.5 FILTERED OUTPUT NOISE VOLTAGE vs CUTOFF FREQUENCY ÎÎÎÎ ÎÎÎÎ IZ = 100 µA TA = 25°C 100 4 ÎÎÎÎÎ ÎÎÎÎÎ Input and Output Voltages − V Filtered Output Noise Voltage −µV 120 LT1004x-2.5 TRANSIENT RESPONSE RC Low Pass 80 100 µA R 60 C 40 20 3 Output 2 24 kΩ VO VI 1 0 5 Input 0 0 0.1 1 10 100 0 Figure 14 † 100 500 t − Time − µs Cutoff Frequency − kHz Figure 15 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 APPLICATION INFORMATION 100 pF 24 V 24 V 600 µs RC + 22 kΩ Output LM301A 12 kΩ 21 V − 16.9 kΩ† LT1004-1.2 −5 V 0.05 µF 1.05 kΩ† 10 kΩ 2N3904 TTL Input 56 kΩ −5 V † 1% metal-film resistors Figure 16. VI(PP) Generator for EPROMs (No Trim Required) Network Detail YSI 44201 RT Network YSI 44201 15 V 6250 Ω Red 2.7 kΩ 5% 10 kΩ 0.1% LT1004-1.2 − 1/2 TLE2022 2765 Ω 0.1% 302 kΩ + 1/2 TLE2022 + − 10 kΩ 0.1% 168.3 Ω 0.1% 10 kΩ 0.1% Figure 17. 0°C-to-100°C Linear-Output Thermometer 10 Brown Green POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 0−10 V 0°C−100°C LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 APPLICATION INFORMATION VI = 6.5 V to 15 V V+ R LM334 V− 5.6 kΩ 3 7 8 + TLC271 2 6 VO = 5 V − 4 LT1004-1.2 3.01 MΩ 1% 150 pF 1 MΩ 1% Figure 18. Micropower 5-V Reference VI ≥ 5 V 9V 100 µA 22 Ω 510 kΩ Output + 1.235 V 50 µF LT1004-1.2 LT1004-1.2 Figure 19. Low-Noise Reference Figure 20. Micropower Reference From 9-V Battery † 100 kΩ R1 1684 Ω 3V Lithium 5 kΩ at 25°C‡ THERMOCOUPLE TYPE R1 + J K T S 232 kΩ 298 kΩ 301 kΩ 2.1 MΩ LT1004-1.2 187 Ω 1800 Ω + − − Quiescent current ≅ 15 µA Yellow Springs Inst. Co., Part #44007 NOTE A: This application compensates within ±1°C from 0°C to 60°C. † ‡ Figure 21. Micropower Cold-Junction Compensation for Thermocouples POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 11 LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 APPLICATION INFORMATION LT1084 VI ≥ 8 V IN 5V OUT 5V + ADJ 10 µF 50 kΩ 10 µF + 301 Ω 1% LT1004-2.5 2.5 V 100 Ω 1% LT1004-2.5 Figure 22. 2.5-V Reference Figure 23. High-Stability 5-V Regulator VCC+ ≥ 5 V 250 kΩ 15 V 250 kΩ 2 kΩ† Output LT1004-1.2 Input R1 (see Note A) − TLE2027 2N3904 + IO (see Note A) 200 kΩ −5 V LT1004-1.2 60 kΩ † VCC− ≤ −5 V May be increased for small output currents 2V 1.235 V NOTE A: R1 ≈ ,I = IO + 10 µA O R1 Figure 24. Ground-Referenced Current Source Figure 25. Amplifier With Constant Gain Over Temperature V+ LM334 1.5 V (see Note A) R 6.8 kΩ 3 kΩ R ≤ 5 kΩ 1.235 V LT1004-1.2 LT1004-1.2 IO ≈ NOTE A: Output regulates down to 1.285 V for IO = 0. Figure 26. 1.2-V Reference From 1.5-V Battery 12 POST OFFICE BOX 655303 1.3 V R Figure 27. Terminal Current Source With Low Temperature Coefficient • DALLAS, TEXAS 75265 LT1004-1.2, LT1004-2.5 MICROPOWER INTEGRATED VOLTAGE REFERENCES SLVS022M − JANUARY 1989 − REVISED MAY 2008 APPLICATION INFORMATION Battery Output R1† 1% 1 MΩ 12 V + TLC271 − LO = Battery Low 133 kΩ 1% LT1004-1.2 † R1 sets trip point, 60.4 kΩ per cell for 1.8 V per cell. Figure 28. Lead-Acid Low-Battery-Voltage Detector LT1084 VI VO VI 10 µF + ADJ VO 120 Ω + 10 µF LT1004-1.2 R1 ≤ VCC − 1 V 0.015 R1 2 kΩ VCC− Figure 29. Variable-Voltage Supply POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 13 PACKAGE OPTION ADDENDUM www.ti.com 13-Aug-2021 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) (1) LT1004CD-1-2 ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 4C-12 LT1004CD-2-5 ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 4C-25 LT1004CDR-1-2 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 4C-12 LT1004CDR-2-5 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 4C-25 LT1004CDRG4-2-5 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 4C-25 LT1004CPW-1-2 ACTIVE TSSOP PW 8 150 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 4C-12 LT1004CPWR-1-2 ACTIVE TSSOP PW 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 4C-12 LT1004CPWR-2-5 ACTIVE TSSOP PW 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 4C-25 LT1004ID-1-2 ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 4I-12 LT1004ID-2-5 ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 4I-25 LT1004IDG4-2-5 ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 4I-25 LT1004IDR-1-2 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 4I-12 LT1004IDR-2-5 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM LT1004IDRE4-2-5 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 4I-25 LT1004IDRG4-1-2 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 4I-12 LT1004IPW-1-2 ACTIVE TSSOP PW 8 150 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 4I-12 LT1004IPW-2-5 ACTIVE TSSOP PW 8 150 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 4I-25 LT1004IPWR-1-2 ACTIVE TSSOP PW 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 4I-12 LT1004IPWR-2-5 ACTIVE TSSOP PW 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 4I-25 The marketing status values are defined as follows: Addendum-Page 1 4I-25 Samples PACKAGE OPTION ADDENDUM www.ti.com 13-Aug-2021 ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of