MC1558TDC1

MC1558-DIE www.ti.com SLOS847 – APRIL 2013 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIER Check for Samples: MC1558-DIE FEATURES 1 • • Short-Circuit Protection Wide Common-Mode and Differential Voltage Ranges • • • No Frequency Compensation Required Low Power Consumption No Latch-Up DESCRIPTION The MC1558-DIE is a dual general-purpose operational amplifier, with each half electrically similar to the μA741, except that offset null capability is not provided. The high-common-mode input voltage range and the absence of latch-up make this amplifier ideal for voltagefollower applications. The MC1558-DIE is short-circuit protected and the internal frequency compensation ensures stability without external components. ORDERING INFORMATION (1) (1) (2) PRODUCT PACKAGE DESIGNATOR PACKAGE MC1558 TD Bare die in waffle pack (2) ORDERABLE PART NUMBER PACKAGE QUANTITY MC1558TDC1 400 MC1558TDC2 10 For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Processing is per the Texas Instruments commercial production baseline and is in compliance with the Texas Instruments Quality Control System in effect at the time of manufacture. Electrical screening consists of DC parametric and functional testing at room temperature only. Unless otherwise specified by Texas Instruments AC performance and performance over temperature is not warranted. Visual Inspection is performed in accordance with MIL-STD-883 Test Method 2010 Condition B at 75X minimum. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2013, Texas Instruments Incorporated MC1558-DIE SLOS847 – APRIL 2013 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. BARE DIE INFORMATION DIE THICKNESS BACKSIDE FINISH BACKSIDE POTENTIAL BOND PAD METALLIZATION COMPOSITION BOND PAD THICKNESS 10.5 mils. Silicon with backgrind Floating AlCuTiW 1627 nm Table 1. Bond Pad Coordinates in Microns 2 DESCRIPTION PAD NUMBER X MIN Y MIN X MAX Y MAX 1OUT 1 215.9 810.26 304.8 906.78 1IN- 2 121.92 271.78 218.44 365.76 1IN+ 3 121.92 120.65 218.44 217.17 VCC- 4 683.26 124.46 779.78 220.98 2IN+ 5 1244.6 120.65 1341.12 217.17 2IN- 6 1244.6 271.78 1341.12 365.76 2OUT 7 1158.24 810.26 1247.14 906.78 VCC+ 8 683.26 792.48 779.78 894.08 Submit Documentation Feedback Copyright © 2013, Texas Instruments Incorporated Product Folder Links: MC1558-DIE PACKAGE OPTION ADDENDUM www.ti.com 4-Feb-2021 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) (3) Device Marking (4/5) (6) MC1558TDC1 ACTIVE 0 374 RoHS & Green Call TI N / A for Pkg Type 0 to 0 MC1558TDC2 ACTIVE 0 10 RoHS & Green Call TI N / A for Pkg Type 0 to 0 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of