MC3403NSR

MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 D D D D D D D MC3303 . . . D, N, OR PW PACKAGE MC3403 . . . D, DB, N, NS, OR PW PACKAGE (TOP VIEW) Wide Range of Supply Voltages, Single Supply . . . 3 V to 36 V or Dual Supplies Class AB Output Stage True Differential Input Stage Low Input Bias Current Internal Frequency Compensation Short-Circuit Protection Designed to Be Interchangeable With Motorola MC3303, MC3403 1OUT 1IN– 1IN+ VCC+ 2IN+ 2IN– 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN– 4IN+ VCC– 3IN+ 3IN– 3OUT description The MC3303 and the MC3403 are quadruple operational amplifiers similar in performance to the µA741, but with several distinct advantages. They are designed to operate from a single supply over a range of voltages from 3 V to 36 V. Operation from split supplies also is possible, provided the difference between the two supplies is 3 V to 36 V. The common-mode input range includes the negative supply. Output range is from the negative supply to VCC – 1.5 V. Quiescent supply currents are less than one-half those of the µA741. The MC3303 is characterized for operation from –40°C to 85°C, and the MC3403 is characterized for operation from 0°C to 70°C. AVAILABLE OPTIONS PACKAGE TA VIOMAX AT 25°C PLASTIC SMALL OUTLINE (D, NS) 0°C to 70°C 10 mV MC3403D MC3403NS –40°C to 85°C 8 mV MC3303D PLASTIC SHRINK SMALL OUTLINE (DB) PLASTIC DIP (N) PLASTIC THIN SHRINK SMALL OUTLINE (PW) MC3403DB MC3403N MC3403PW — MC3303N MC3303PW The D package is available taped and reeled. Add R suffix to the device type (e.g., MC3403DR). The DB, NS, and PW packages are only available taped and reeled. logic diagram (each amplifier) IN+ + IN– – OUT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 schematic (each amplifier) Common Bias Circuitry VCC+ 5 pF IN+ To Three Other Amplifiers Output IN– 2.4 kΩ VCC– Component values shown are nominal. absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V VCC– . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –18 V Supply voltage, VCC+ with respect to VCC– . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Differential input voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±36 V Input voltage (see Notes 1 and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V Package thermal impedance, θJA (see Note 4): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. These voltage values are with respect to the midpoint between VCC+ and VCC–. 2. Differential voltages are at IN+ with respect to IN–. 3. Neither input must ever be more positive than VCC+ or more negative than VCC–. 4. The package thermal impedance is calculated in accordance with JESD 51-7. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 recommended operating conditions VCC Supply voltage Dual supply voltage Dual-supply TA Operating free-air free air temperature MIN MAX 5 30 UNIT V VCC+ VCC– 2.5 15 V –2.5 –15 V MC3303 –40 85 MC3403 0 70 °C electrical characteristics at specified free-air temperature, VCC+ = 14 V, VCC– = 0 V for MC3303, VCC± = ±15 V for MC3403 (unless otherwise noted) PARAMETER VIO Input offset voltage See Note 5 aV Temperature coefficient of input offset voltage See Note 5 IIO Input offset current See Note 5 aI Temperature coefficient of input offset current See Note 5 IIB Input bias current See Note 5 VICR Common-mode input voltage range‡ VOM Peak P k output t t voltage swing IO IO MC3303 TEST CONDITIONS† MIN MC3403 TYP MAX 2 8 25°C Full range MIN TYP MAX 2 10 10 Full range 10 25°C 30 Full range 12 75 30 Full range 25°C –0.2 Full range 50 –0.5 –0.2 –1 VCC– to 12 VCC– to 12.5 VCC– to 13 VCC– to 13.5 25°C 12 12.5 ±12 ±13.5 RL = 2 kΩ 25°C 10 12 ±10 ±13 RL = 2 kΩ Full range 10 25°C 20 Full range 15 AVD Large-signal differential g g voltage amplification V RL = 2 kΩ VO = ±10 V, BOM Maximum-output-swing bandwidth VOPP = 20 V, AVD = 1, THD ≤ 5%, RL = 2 kΩ B1 φm Unity-gain bandwidth ri nA pA/C –0.5 –0.8 25°C RL = 10 kΩ 50 200 50 mV µV/°C 10 250 UNIT µA V V ±10 200 20 200 V/mV 15 25°C 9 9 kHz 25°C 1 1 MHz Phase margin VO = 50 mV, RL = 10 kΩ CL = 200 pF, RL = 2 kΩ Input resistance f = 20 Hz 25°C ro Output resistance f = 20 Hz 25°C CMRR Common-mode rejection ratio VIC = VICRmin 25°C kSVS Supply voltage sensitivity (∆VIO/∆VCC) VCC± = ±2.5 to ±15 V 25°C IOS Short-circuit output current§ 25°C 25°C 60° 0.3 60° 1 0.3 75 70 ±10 90 70 30 150 ±30 ±45 ±10 1 MΩ 75 Ω 90 dB 30 150 µV/V ±30 ±45 mA ICC Total supply current No load, See Note 5 25°C 2.8 7 2.8 7 mA † All characteristics are measured under open-loop conditions with zero common-mode voltage unless otherwise specified. Full range for TA is –40°C to 85°C for MC3303, and 0°C to 70°C for MC3403. ‡ The VICR limits are linked directly, volt-for-volt, to supply voltage; the positive limit is 2 V less than VCC+. § Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. NOTE 5: VIO, IIO, IIB, and ICC are defined at VO = 0 for MC3403 and VO = 7 V for MC3303. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 electrical characteristics, VCC+ = 5 V, VCC– = 0 V, TA = 25°C (unless otherwise noted) TEST CONDITIONS† PARAMETER VIO IIO Input offset voltage IIB MC3303 MIN TYP MC3403 MAX MIN TYP MAX UNIT VO = 2.5 V VO = 2.5 V 10 2 10 75 30 50 nA Input bias current VO = 2.5 V RL = 10 kΩ –0.5 –0.2 –0.5 µA VOM Peak output voltage swing‡ RL = 10 kΩ, VCC+ = 5 V to 30 V AVD Large-signal g g differential voltage amplification VO = 1 1.7 7 V to 3 3.3 3V V, RL = 2 kΩ kSVS Supply-voltage y g sensitivity y (∆VIO/∆VCC±) 5 V to ±15 V VCC± = ±2 ±2.5 Supply current VO = 2.5 V, No load f = 1 kHZ to 20 kHZ Input offset current ICC VO1/VO2 Crosstalk attenuation 3.3 3.5 3.3 VCC+ – 1.7 3.5 V VCC+ – 1.7 20 200 20 200 150 2.5 7 120 mV V/mV 150 2.5 7 120 µV/V mA dB † All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. ‡ Output will swing essentially to ground. operating characteristics, VCC+ = 14 V, VCC– = 0 V for MC3303, VCC± = ±15 V for MC3403, TA = 25°C, AVD = 1 (unless otherwise noted) PARAMETER TYP UNIT VI = ±10 V, ∆VO = 50 mV, CL = 100 pF, RL = 2 kΩ, See Figure 1 0.6 V/µs CL = 100 pF, RL = 10 kΩ, See Figure 1 0.35 µs CL = 100 pF, RL = 10 kΩ, See Figure 1 0.35 µs Overshoot factor ∆VO = 50 mV, ∆VO = 50 mV, CL = 100 pF, RL = 10 kΩ, See Figure 1 20 % Crossover distortion VI(PP) = 30 mV, VOPP = 2 V, f = 10 kHZ 1 % SR Slew rate at unity gain tr tf Rise time Fall time TEST CONDITIONS PARAMETER MEASUREMENT INFORMATION – OUT + VI CL = 100 pF RL Figure 1. Unity-Gain Amplifier 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 TYPICAL CHARACTERISTICS† 30 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ RL = 10 kΩ TA = 25°C 25 20 15 10 5 0 0 2 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VOPP – Maximum Peak-to-Peak Output Voltage – V VOPP – Maximum Peak-to-Peak Output Voltage – V MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs SUPPLY VOLTAGE 4 6 8 10 12 14 16 30 25 20 15 ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ 10 5 VCC± = ±15 V CL = 0 RL = 10 kΩ TA = 25°C See Figure 1 0 1k 10 k 100 k f – Frequency – Hz |VCC±| – Supply Voltage – V Figure 3 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ VCC± = ±15 V RL = 2 kΩ TA = 25°C See Figure 1 10 105 Output Input Output Voltages – V A VD – Large-Signal Differential Voltage Amplification – dB Figure 2 106 104 103 102 ÎÎÎÎÎ ÎÎÎÎÎ VCC± = ±15 V RL = 2 kΩ TA = 25°C 10 1 1 10 100 1M 5 0 –5 Input –10 1k 10 k 100 k 1M 0 f – Frequency – Hz 10 20 30 40 50 60 70 80 90 t – Time –µs Figure 4 Figure 5 † Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 TYPICAL CHARACTERISTICS† INPUT BIAS CURRENT vs SUPPLY VOLTAGE INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE ÎÎÎÎÎ ÎÎÎÎÎ 250 VCC± = ±15 V 200 150 100 200 150 100 50 50 0 –75 ÎÎÎÎ ÎÎÎÎ TA = 25°C I IB – Input Bias Current – mA I IB – Input Bias Current – mA 250 0 –50 –25 0 25 50 75 100 125 0 2 TA – Free-Air Temperature – °C 4 6 8 10 12 14 16 |VCC±| – Supply Voltage – V Figure 6 Figure 7 † Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) MC3303D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 MC3303 Samples MC3303DG4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 MC3303 Samples MC3303DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 MC3303 Samples MC3303N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type -40 to 85 MC3303N Samples MC3303PW ACTIVE TSSOP PW 14 90 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 M3303 Samples MC3303PWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 M3303 Samples MC3403D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 MC3403 Samples MC3403DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 MC3403 Samples MC3403N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 MC3403N Samples MC3403NE4 ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 MC3403N Samples MC3403NSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 MC3403 Samples MC3403PWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 M3403 Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of