OPA
2130
OPA
130
OPA
130
OPA
OPA
OPA130
OPA2130
OPA4130
4130
2130
OPA
4130
SBOS053A – MAY 1998 – REVISED MARCH 2006
Low Power, Precision
FET-INPUT OPERATIONAL AMPLIFIERS
FEATURES
OPA130
● LOW QUIESCENT CURRENT: 530µA/amp
● LOW OFFSET VOLTAGE: 1mV max
● HIGH OPEN-LOOP GAIN: 120dB min
● HIGH CMRR: 90dB min
Offset Trim
1
8
NC
–In
2
7
V+
+In
3
6
Output
V–
4
5
Offset Trim
8
V+
7
Out B
6
–In B
5
+In B
● FET INPUT: IB = 20pA max
● EXCELLENT BANDWIDTH: 1MHz
DIP-8, SO-8
● WIDE SUPPLY RANGE: ±2.25 to ±18V
● SINGLE, DUAL, AND QUAD VERSIONS
OPA2130
DESCRIPTION
Out A
1
–In A
2
+In A
3
V–
4
The OPA130 series of FET-input op amps combine precision
dc performance with low quiescent current. Single, dual, and
quad versions have identical specifications for maximum
design flexibility. They are ideal for general-purpose, portable, and battery operated applications, especially with high
source impedance.
OPA130 op amps are easy to use and free from phase
inversion and overload problems often found in
common FET-input op amps. Input cascode circuitry provides excellent common-mode rejection and maintains low
input bias current over its wide input voltage range. OPA130
series op amps are stable in unity gain and provide excellent
dynamic behavior over a wide range of load conditions,
including high load capacitance. Dual and quad designs
feature completely independent circuitry for lowest crosstalk
and freedom from interaction, even when overdriven or
overloaded.
Single and dual versions are available in DIP-8 and SO-8
surface-mount packages. Quad is available in DIP-14 and
SO-14 surface-mount packages. All are specified for
–40°C to +85°C operation.
A
B
DIP-8, SO-8
OPA4130
Out A
1
–In A
2
A
14
Out D
13
–In D
D
+In A
3
12
+In D
V+
4
11
V–
+In B
5
10
+In C
B
C
–In B
6
9
–In C
Out B
7
8
Out C
DIP-14, SO-14
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
Copyright © 1998-2006, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
ELECTROSTATIC
DISCHARGE SENSITIVITY
ABSOLUTE MAXIMUM RATINGS(1)
Supply Voltage, V+ to V– .................................................................... 36V
Input Voltage ..................................................... (V–) –0.7V to (V+) +0.7V
Output Short-Circuit(2) .............................................................. Continuous
Operating Temperature .................................................. –40°C to +125°C
Storage Temperature ..................................................... –40°C to +125°C
Junction Temperature ...................................................................... 150°C
NOTE: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade
device reliability. (2) Short-circuit to ground, one amplifier per package.
PACKAGE/ORDERING INFORMATION
For the most current package and ordering information, see
the Package Option Addendum at the end of this document,
or see the TI web site at www.ti.com.
2
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
OPA130, OPA2130, OPA4130
www.ti.com
SBOS053A
ELECTRICAL CHARACTERISTICS
At TA = +25°C, VS = ±15V, and RL = 10kΩ, unless otherwise noted.
OPA130PA, UA
OPA2130PA, UA
OPA4130PA, UA
PARAMETER
OFFSET VOLTAGE
Input Offset Voltage
vs Temperature(1)
vs Power Supply
Channel Separation (dual and quad)
CONDITION
MIN
Operating Temperature Range
VS = ±2.25V to ±18V
INPUT BIAS CURRENT(2)
Input Bias Current
vs Temperature
Input Offset Current
VCM = 0V
VCM = 0V
VCM = –13V to +13V
INPUT IMPEDANCE
Differential
Common-Mode
VCM = –13V to +13V
OPEN-LOOP GAIN
Open-loop Voltage Gain
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time: 0.1%
0.01%
Overload Recovery Time
Total Harmonic Distortion + Noise
VO = –13.8V to +13V
RL = 2kΩ, VO = –13V to +12V
(V+)–2
(V–)+2
90
120
120
G = 1, 10V Step, CL = 100pF
G = 1, 10V Step, CL = 100pF
G = 1, VIN = ±15V
1kHz, G = 1, VO = 3.5Vrms
OUTPUT
Voltage Output, Positive
Negative
Positive
Negative
Short-Circuit Current
Capacitive Load Drive (Stable Operation)
POWER SUPPLY
Specified Operating Voltage
Operating Voltage Range
Quiescent Current (per amplifier)
RL = 2kΩ
RL = 2kΩ
(V+)–2
(V–)+1.2
(V+)–3
(V–)+2
±2.25
IO = 0
TEMPERATURE RANGE
Operating Range
Storage
Thermal Resistance, θJA
DIP-8
SO-8 Surface-Mount
DIP-14
SO-14 Surface-Mount
MAX
UNITS
±0.2
±2
2
0.3
±1
±10
20
mV
µV/°C
µV/V
µV/V
+5
±20
See Typical Characteristics
±2
±20
NOISE
Input Voltage Noise
Noise Density, f = 10Hz
f = 100Hz
f = 1kHz
f = 10kHz
Current Noise Density, f = 1kHz
INPUT VOLTAGE RANGE
Common-Mode Voltage Range, Positive
Negative
Common-Mode Rejection
TYP
pA
pA
30
18
16
16
4
nV/√Hz
nV/√Hz
nV/√Hz
nV/√Hz
fA/√Hz
(V+)–1.5
(V–)+1.2
105
V
V
dB
1013 || 1
1013 || 3
Ω || pF
Ω || pF
135
135
dB
dB
1
2
5.5
7
2
0.0003
MHz
V/µs
µs
µs
µs
%
(V+)–1.5
(V–)+1
(V+)–2.5
(V–)+1.5
±18
10
V
V
V
V
mA
nF
±15
±530
–40
–40
100
150
80
110
±18
±650
V
V
µA
+85
+125
°C
°C
°C/W
°C/W
°C/W
°C/W
NOTES: (1) Ensured by wafer test. (2) High-speed test at TJ = 25°C.
OPA130, OPA2130, OPA4130
SBOS053A
www.ti.com
3
TYPICAL CHARACTERISTICS
At TA = +25°C, VS = ±15V, and RL = 10kΩ, unless otherwise noted.
POWER SUPPLY AND COMMON-MODE REJECTION
vs FREQUENCY
OPEN-LOOP GAIN/PHASE vs FREQUENCY
0
120
80
φ
–90
60
40
–135
PSR, CMR (dB)
–45
CL = 100pF
Phase Shift (°)
Voltage Gain (dB)
100
20
G
0
–180
–20
1
10
100
1k
10k
100k
1M
120
110
100
90
80
70
60
50
40
30
20
10
0
–PSR
CMR
+PSR
10
10M
100
1k
Frequency (Hz)
10
10
Channel Separation (dB)
Voltage Noise
160
Current Noise (fA/√Hz)
Voltage Noise (nV/√Hz)
100
100
140
120
100
Current Noise
1
1
1k
10k
100k
RL = 10kΩ
10
100
1k
10k
100k
Frequency (Hz)
Frequency (Hz)
INPUT BIAS AND INPUT OFFSET CURRENT
vs TEMPERATURE
INPUT BIAS CURRENT
vs INPUT COMMON-MODE VOLTAGE
10
10k
1k
VCM = 0V
100
IB
IOS
10
1
5
0.1
0
0.01
–75
–50
–25
0
25
50
75
100
–15
125
–10
–5
0
5
10
15
Common-Mode Voltage (V)
Ambient Temperature (°C)
4
Dual and quad devices.
G = 1, all channels.
Quad measured channel
A to D or B to C—other
combinations yield improved
rejection.
80
1M
Input Bias Current (pA)
Input Bias and Input Offset Current (pA)
100
1M
CHANNEL SEPARATION vs FREQUENCY
1k
1k
10
100k
Frequency (Hz)
INPUT VOLTAGE AND CURRENT NOISE
SPECTRAL DENSITY vs FREQUENCY
1
10k
OPA130, OPA2130, OPA4130
www.ti.com
SBOS053A
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VS = ±15V, and RL = 10kΩ, unless otherwise noted.
Quiescent Current Per Amp (mA)
AOL, CMR, PSR (dB)
140
130
Open-Loop
Gain
120
PSR
110
CMR
0.65
40
0.60
35
IQ
0.55
30
–
ISC
0.50
25
0.45
20
+
ISC
0.40
15
0.35
100
–75
–50
–25
0
25
50
75
100
10
–75
125
–50
–25
0
25
50
75
Ambient Temperature (°C)
Temperature (°C)
OFFSET VOLTAGE
PRODUCTION DISTRIBUTION
OFFSET VOLTAGE DRIFT
PRODUCTION DISTRIBUTION
15
Short-Circuit Current (mA)
QUIESCENT CURRENT AND SHORT-CIRCUIT CURRENT
vs TEMPERATURE
AOL, CMR, PSR vs TEMPERATURE
100
125
20
Percent of Amplifiers (%)
Percent of Amplifiers (%)
18
10
5
16
14
12
10
8
6
4
2
0
Offset Voltage (µV)
Offset Voltage Drift (µV/°C)
TOTAL HARMONIC DISTORTION + NOISE
vs FREQUENCY
MAXIMUM OUTPUT VOLTAGE
vs FREQUENCY
0.1
8.00
7.50
7.00
6.50
6.00
5.50
5.00
4.50
4.00
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
700
600
500
400
300
200
0
100
–100
–200
–300
–400
–500
–600
–700
0
30
Output Voltage (Vp-p)
THD + Noise (%)
25
0.01
G = +10
0.001
RL = 10kΩ
RL = 2kΩ
G = +1
VS = ±15V
15
10
VS = ±2.25V
0
1k
10k
10k
100k
Frequency (Hz)
100k
1M
Frequency (Hz)
OPA130, OPA2130, OPA4130
SBOS053A
VS = ±5V
5
0.0001
100
Maximum output voltage
without slew-rate induced
distortion
20
www.ti.com
5
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VS = ±15V, and RL = 10kΩ, unless otherwise noted.
SMALL-SIGNAL STEP RESPONSE
G = 1, CL = 1000pF
50mV/div
50mV/div
SMALL-SIGNAL STEP RESPONSE
G =1, CL = 100pF
5µs/div
500ns/div
LARGE-SIGNAL STEP RESPONSE
G = 1, CL = 100pF
SETTLING TIME vs GAIN
100
5V/div
Settling Time (µs)
0.01%
10
0.1%
1
5µs/div
±1
±10
±100
Gain (V/V)
SMALL-SIGNAL OVERSHOOT
vs LOAD CAPACITANCE
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
15
80
–55°C
12
11
60
+125°C
+25°C
10
–10
–11
+125°C
+85°C
–12
–13
±5
±10
±15
40
30
G = –1
G = ±5
10
–15
0
50
20
+25°C
–55°C
–14
0
10pF
±20
Output Current (mA)
6
G = +1
70
13
Overshoot (%)
Output Voltage Swing (V)
14
100pF
1nF
10nF
100nF
Load Capacitance (F)
OPA130, OPA2130, OPA4130
www.ti.com
SBOS053A
APPLICATIONS INFORMATION
V+
Trim Range: ±5mV typ
OPA130 series op amps are unity-gain stable and suitable
for a wide range of general-purpose applications. Power
supply pins should be bypassed with 10nF ceramic capacitors or larger.
OPA130 op amps are free from unexpected output phasereversal common with FET op amps. Many FET-input op
amps exhibit phase-reversal of the output when the input
common-mode voltage range is exceeded. This can occur in
voltage-follower circuits, causing serious problems in
control loop applications. OPA130 series op amps are free
from this undesirable behavior. All circuitry is completely
independent in dual and quad versions, assuring normal
behavior when one amplifier in a package is overdriven or
short-circuited.
10nF
100kΩ
7
1
2
5
3
10nF
OPA130
4
6
OPA130 single op amp only.
Use offset adjust pins only to null
offset voltage of op amp—see text.
V–
FIGURE 1. OPA130 Offset Voltage Trim Circuit.
INPUT BIAS CURRENT
OPERATING VOLTAGE
OPA130 series op amps operate with power supplies from
±2.25V to ±18V with excellent performance. Although specifications are production tested with ±15V supplies, most
behavior remains unchanged throughout the full operating
voltage range. Parameters which vary significantly with
operating voltage are shown in the typical performance
curves.
The input bias current is approximately 5pA at room temperature and increases with temperature as shown in the
Typical Characteristic curve Input Bias Current vs Temperature.
Input stage cascode circuitry assures that the input bias
current remains virtually unchanged throughout the full input
common-mode range of the OPA130. See the Typical
Characteristic curve Input Bias Current vs Common-Mode
Voltage.
OFFSET VOLTAGE TRIM
Offset voltage of OPA130 series amplifiers is laser trimmed
and usually requires no user adjustment. The OPA130
(single op amp version) provides offset voltage trim connections on pins 1 and 5. Offset voltage can be adjusted by
connecting a potentiometer as shown in Figure 1. This
adjustment should be used only to null the offset of the op
amp, not to adjust system offset or offset produced by the
signal source. Nulling offset that is not produced by the
amplifier will change the offset voltage drift behavior of the
op amp.
OPA130, OPA2130, OPA4130
SBOS053A
www.ti.com
7
PACKAGE OPTION ADDENDUM
www.ti.com
14-Oct-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
OPA130UA
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-3-260C-168 HR
-40 to 125
OPA
130UA
Samples
OPA130UA/2K5
ACTIVE
SOIC
D
8
2500
RoHS & Green
NIPDAU
Level-3-260C-168 HR
-40 to 125
OPA
130UA
Samples
OPA130UAE4
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-3-260C-168 HR
-40 to 125
OPA
130UA
Samples
OPA2130UA
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-3-260C-168 HR
-40 to 125
OPA
2130UA
Samples
OPA2130UA/2K5
ACTIVE
SOIC
D
8
2500
RoHS & Green
NIPDAU
Level-3-260C-168 HR
-40 to 125
OPA
2130UA
Samples
OPA4130UA
ACTIVE
SOIC
D
14
50
RoHS & Green
NIPDAU-DCC
Level-3-260C-168 HR
-40 to 85
OPA4130UA
Samples
OPA4130UA/2K5
ACTIVE
SOIC
D
14
2500
RoHS & Green
NIPDAU-DCC
Level-3-260C-168 HR
-40 to 85
OPA4130UA
Samples
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of