OPA
OPA
433
OPA336
OPA2336
OPA4336
6
336
OPA2
336
SBOS068C – JANUARY 1997 – REVISED JANUARY 2005
SINGLE-SUPPLY, microPower
CMOS OPERATIONAL AMPLIFIERS
microAmplifier ™ Series
FEATURES
DESCRIPTION
●
●
●
●
OPA336 series microPower CMOS operational amplifiers
are designed for battery-powered applications. They
operate on a single supply with operation as low as 2.1V.
The output is rail-to-rail and swings to within 3mV of the
supplies with a 100kΩ load. The common-mode range
extends to the negative supply—ideal for single-supply
applications. Single, dual, and quad versions have identical
specifications for maximum design flexibility.
SINGLE-SUPPLY OPERATION
RAIL-TO-RAIL OUTPUT (within 3mV)
microPOWER: IQ = 20µA/Amplifier
microSIZE PACKAGES
● LOW OFFSET VOLTAGE: 125µV max
● SPECIFIED FROM VS = 2.3V to 5.5V
● SINGLE, DUAL, AND QUAD VERSIONS
In addition to small size and low quiescent current
(20µA/amplifier), they feature low offset voltage
(125µV max), low input bias current (1pA), and high openloop gain (115dB). Dual and quad designs feature
completely independent circuitry for lowest crosstalk and
freedom from interaction.
APPLICATIONS
●
●
●
●
●
●
●
BATTERY-POWERED INSTRUMENTS
PORTABLE DEVICES
HIGH-IMPEDANCE APPLICATIONS
PHOTODIODE PRE-AMPS
PRECISION INTEGRATORS
MEDICAL INSTRUMENTS
TEST EQUIPMENT
OPA336 packages are the tiny SOT23-5 surface mount
and SO-8 surface-mount. OPA2336 come in the miniature
MSOP-8 surface-mount, SO-8 surface-mount, and DIP-8
packages. The OPA4336 package is the space-saving
SSOP-16 surface-mount. All are specified from
–40°C to +85°C and operate from –55°C to +125°C.
A macromodel is available for download (at www.ti.com)
for design analysis.
OPA336
Out
1
V–
2
+In
3
5
V+
4
–In
OPA4336
Out A
1
–In A
2
A
SOT23-5
OPA336
OPA2336
NC
1
8
NC
Out A
1
–In
2
7
V+
–In A
2
+In
3
6
Output
+In A
3
V–
4
5
NC
V–
4
SO-8
A
B
DIP-8, SO-8, MSOP-8
16
Out D
15
–In D
D
+In A
3
14
+In D
V+
4
13
V–
+In B
5
12
+In C
8
V+
7
Out B
–In B
6
11
–In C
6
–In B
Out B
7
10
Out C
5
+In B
NC
8
9
NC
B
C
SSOP-16
NC = No Connection
NC = No Connection
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
Copyright © 1997-2005, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
PACKAGE/ORDERING INFORMATION(1)
PRODUCT
PACKAGE-LEAD
PACKAGE
DRAWING
DESIGNATOR
Single
OPA336N
OPA336NA
OPA336NJ
OPA336U
OPA336UA
OPA336UJ
SOT23-5
SOT23-5
SOT23-5
SO-8 Surface-Mount
SO-8 Surface-Mount
SO-8 Surface-Mount
DBV
DBV
DBV
D
D
D
A36(2)
A36(2)
J36
OPA336U
OPA336UA
OPA336UJ
Dual
OPA2336E
OPA2336EA
OPA2336P
MSOP-8 Surface-Mount
MSOP-8 Surface-Mount
DIP-8
DGK
DGK
P
B36(2)
B36(2)
OPA2336P
PACKAGE
MARKING
OPA2336PA
DIP-8
P
OPA2336PA
OPA2336U
OPA2336UA
SO-8 Surface-Mount
SO-8 Surface-Mount
D
D
OPA2336U
OPA2336UA
Quad
OPA4336EA
SSOP-16 Surface-Mount
DBQ
OPA4336EA
NOTES: (1) For the most current package and ordering information, see the package option addendum at the end of this data sheet. (2) Grade will be marked on
the Reel.
ELECTROSTATIC
DISCHARGE SENSITIVITY
ABSOLUTE MAXIMUM RATINGS(1)
Supply Voltage ................................................................................... 7.5V
Signal Input Terminals, Voltage(2) ..................... (V–) –0.3V to (V+) +0.3V
Current(2) .................................................... 10mA
Output Short-Circuit(3) .............................................................. Continuous
Operating Temperature .................................................. –55°C to +125°C
Storage Temperature ..................................................... –55°C to +125°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
ESD Rating:
Charged Device Model, OPA336 NJ and UJ only (CDM)(4) ....... 1000V
Human Body Model (HBM)(4) ......................................................... 500V
Machine Model (MM)(4) .................................................................. 100V
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only. Functional operation of the device at these conditions, or beyond the specified operating
conditions, is not implied. (2) Input terminals are diode-clamped to the power
supply rails. Input signals that can swing more than 0.3V beyond the supply
rails should be current-limited to 10mA or less. (3) Short-circuit to ground,
one amplifier per package. (4) OPA336 NJ and UJ have been tested to CDM
of 1000V. All other previous package versions have been tested using HBM
and MM. Results are shown.
2
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
OPA336, 2336, 4336
www.ti.com
SBOS068C
ELECTRICAL CHARACTERISTICS: VS = 2.3V to 5.5V
Boldface limits apply over the specified temperature range, TA = –40°C to +85°C.
At TA = +25°C, VS = +5V, and RL = 25kΩ connected to VS/2, unless otherwise noted.
OPA336N, U
OPA2336E, P, U
PARAMETER
OFFSET VOLTAGE
Input Offset Voltage
vs Temperature
vs Power Supply
Over Temperature
Channel Separation, dc
CONDITION
VOS
dVOS/dT
PSRR
INPUT BIAS CURRENT
Input Bias Current
Over Temperature
Input Offset Current
MIN
TYP(1)
MAX
±60
±125
25
100
130
±1.5
VS = 2.3V to 5.5V
VS = 2.3V to 5.5V
±1
IOS
±1
NOISE
Input Voltage Noise, f = 0.1 to 10Hz
Input Voltage Noise Density, f = 1kHz en
Current Noise Density, f = 1kHz
in
3
40
30
VCM
CMRR
–0.2V < VCM < (V+) –1V
–0.2V < VCM < (V+) –1V
–0.2
80
76
INPUT IMPEDANCE
Differential
Common-Mode
OPEN-LOOP GAIN
Open-Loop Voltage Gain
Over Temperature
Over Temperature
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Overload Recovery Time
AOL RL = 25kΩ, 100mV < VO < (V+) – 100mV
RL = 25kΩ, 100mV < VO < (V+) – 100mV
RL = 5kΩ, 500mV < VO < (V+) – 500mV
RL = 5kΩ, 500mV < VO < (V+) – 500mV
GBW
SR
Over Temperature
POWER SUPPLY
Specified Voltage Range
Minimum Operating Voltage
Quiescent Current (per amplifier)
Over Temperature
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
Thermal Resistance
SOT-23-5 Surface-Mount
MSOP-8 Surface-Mount
SO-8 Surface-Mount
DIP-8
SSOP-16 Surface-Mount
DIP-14
100
100
90
90
✻
70
✻
76
74
VS
IQ
2.3
90
90
✻
✻
IO = 0
IO = 0
–40
–55
–55
✻
✻
✻
✻
✻
✻
✻
76
74
90
90
✻
✻
✻
✻
32
36
+85
+125
+125
✻
✻
✻
V
dB
dB
✻
✻
Ω || pF
Ω || pF
✻
dB
dB
dB
dB
✻
kHz
V/µs
µs
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
23
✻
✻
✻
θJA
200
150
150
100
100
80
µVp-p
nV/√Hz
fA/√Hz
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
pA
pA
pA
86
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
±500 ±2500
µV
✻
µV/°C
✻
✻
µV/V
✻
µV/V
✻
µV/V
✻
✻
✻
86
✻
✻
100
100
500
500
TYP MAX UNITS
✻
✻
✻
✻
5.5
2.1
20
✻
✻
✻
✻
±5
See Text
ISC
CLOAD
✻
✻
MIN
✻
✻
✻
106
3
20
±500
±10
115
RL = 100kΩ, AOL ≥ 70dB
RL = 25kΩ, AOL ≥ 90dB
RL = 25kΩ, AOL ≥ 90dB
RL = 5kΩ, AOL ≥ 90dB
RL = 5kΩ, AOL ≥ 90dB
✻
✻
✻
✻
(V+) –1
100
0.03
100
MAX
±10
±60
90
VS = 5V, G = 1
VS = 5V, G = 1
VIN • G = VS
TYP
OPA336NJ, UJ
✻
1013 || 2
1013 || 4
OUTPUT
Voltage Output Swing from Rail(2)
Over Temperature
Short-Circuit Current
Capacitive Load Drive
MIN
0.1
IB
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection Ratio
Over Temperature
OPA336NA, UA
OPA2336EA, PA, UA
OPA4336EA
✻
✻
mV
mV
mV
mV
mV
mA
pF
38
42
V
V
µA
µA
✻
✻
✻
°C
°C
°C
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
✻Specifications same as OPA2336E, P, U.
NOTES: (1) VS = +5V. (2) Output voltage swings are measured between the output and positive and negative power-supply rails.
OPA336, 2336, 4336
SBOS068C
www.ti.com
3
TYPICAL CHARACTERISTICS
At TA = +25°C, VS = +5V, and RL = 25kΩ connected to VS/2, unless otherwise noted.
POWER-SUPPLY and COMMON-MODE
REJECTION RATIO vs FREQUENCY
OPEN-LOOP GAIN/PHASE vs FREQUENCY
100
100
G
0
–45
40
–90
Φ
20
–135
0
–180
PSRR, CMRR (dB)
60
CMRR
80
Phase (°)
Voltage Gain (dB)
80
60
PSRR
40
20
–20
0
10
1
100
1k
10k
100k
1M
1
10
Frequency (Hz)
100
1k
100k
QUIESCENT CURRENT vs TEMPERATURE
QUIESCENT CURRENT vs SUPPLY VOLTAGE
30
30
Per Amplifier
Per Amplifier
VS = +5V
Quiescent Current (µA)
25
Quiescent Current (µA)
10k
Frequency (Hz)
25
20
15
20
15
10
VS = +2.3V
5
0
10
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
–75
6.0
–50
–25
Supply Voltage (V)
SHORT-CIRCUIT CURRENT vs SUPPLY VOLTAGE
50
75
100
125
8
7
±5
Short-Circuit Current (mA)
Short-Circuit Current (mA)
25
SHORT-CIRCUIT CURRENT vs TEMPERATURE
±6
+ISC
±4
±3
±2
–ISC
±1
VS = +5V
6
–ISC
5
4
+ISC
+ISC
3
VS = +2.3V
2
–ISC
1
0
0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
–75
Supply Voltage (V)
4
0
Temperature (°C)
–50
–25
0
25
50
75
100
125
Temperature (°C)
OPA336, 2336, 4336
www.ti.com
SBOS068C
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VS = +5V, and RL = 25kΩ connected to VS/2, unless otherwise noted.
INPUT VOLTAGE AND CURRENT NOISE
SPECTRAL DENSITY vs FREQUENCY
CHANNEL SEPARATION vs FREQUENCY
1k
150
100
100
10
10
Current Noise (fA/√Hz)
140
130
Dual and Quad devices, G = 1, all
channels. Quad measured channel A
to D or B to C—other combinations
yield improved rejection.
120
Current Noise
1
110
1
10
100
1k
10k
100k
100
1k
Frequency (Hz)
120
AOL
VS = +5.5V
AOL, CMRR, PSRR (dB)
4
3
VS = +2.3V
2
1
110
100
PSRR
90
CMRR
80
70
0
1k
100
10k
–75
100k
–50
–25
0
25
50
75
100
Frequency (Hz)
Temperature (°C)
OFFSET VOLTAGE
PRODUCTION DISTRIBUTION
OFFSET VOLTAGE DRIFT MAGNITUDE
PRODUCTION DISTRIBUTION
25
125
25
Percent of Amplifiers (%)
Typical production
distribution of
packaged units.
15
10
5
0.1% 0.3%
0.2% 0.1%
20
15
10
5
Offset Voltage (µV)
4
3.5
3.75
3
3.25
2.5
2.75
2
2.25
1.5
1
1.25
Offset Voltage Drift (µV/°C)
OPA336, 2336, 4336
SBOS068C
0.5
0.25
500
400
300
200
100
0
–100
–200
–300
–400
0
–500
0
Typical production
distribution of
packaged units.
0.75
Output Voltage (Vp-p)
5
Percent of Amplifiers (%)
100k
AOL, CMRR, PSRR vs TEMPERATURE
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY
6
20
10k
Frequency (Hz)
1.75
Voltage Noise (nV/√Hz)
Voltage Noise
Channel Separation (dB)
1k
www.ti.com
5
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VS = +5V, and RL = 25kΩ connected to VS/2, unless otherwise noted.
INPUT BIAS CURRENT
vs INPUT COMMON-MODE VOLTAGE
INPUT BIAS CURRENT vs TEMPERATURE
4
Input Bias Current (pA)
Input Bias Current (pA)
1k
100
10
1
3
VS = +5V
2
1
0
0.1
–75
–50
–25
0
25
50
Temperature (°C)
75
100
0
125
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
1
2
3
Common-Mode Voltage (V)
4
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
5
–2.5
VS = ±2.5V
VS = +5V
–2.0
–55°C
Sourcing
Current
+125°C
+25°C
Output Voltage (V)
4
Output Voltage (V)
5
3
VS = +2.3V
+125°C
2
–55°C
1
Sinking
Current
–1.5
+125°C
–1.0
–55°C
–0.5
+25°C
+25°C
0
0
0
1
2
3
4
5
Output Current (mA)
6
7
8
–0
–2
–3
–4
–5
Output Current (mA)
–6
–7
–8
LARGE-SIGNAL STEP RESPONSE
G = 1, CL = 620pF, VS = +5V
20mV/div
500mV/div
SMALL-SIGNAL STEP RESPONSE
G = 1, CL = 200pF, VS = +5V
200µs/div
50µs/div
6
–1
OPA336, 2336, 4336
www.ti.com
SBOS068C
APPLICATIONS INFORMATION
OPA336 series op amps are fabricated on a state-of-the-art
0.6 micron CMOS process. They are unity-gain stable and
suitable for a wide range of general-purpose applications.
Power-supply pins should be bypassed with 0.01µF ceramic
capacitors. OPA336 series op amps are protected against
reverse battery voltages.
Normally, input bias current is approximately 1pA. However, input voltages exceeding the power supplies can
cause excessive current to flow in or out of the input pins.
Momentary voltages greater than the power supply can be
tolerated as long as the current on the input pins is limited
to 10mA. This is easily accomplished with an input resistor, as shown in Figure 2.
OPERATING VOLTAGE
+5V
OPA336 series op amps can operate from a +2.1V to +5.5V
single supply with excellent performance. Most behavior
remains unchanged throughout the full operating voltage
range. Parameters which vary significantly with operating
voltage are shown in the typical characteristics. OPA336
series op amps are fully specified for operation from +2.3V
to +5.5V; a single limit applies over the supply range. In
addition, many parameters are ensured over the specified
temperature range, –40°C to +85°C.
INPUT VOLTAGE
The input common-mode range of OPA336 series op amps
extends from (V–) – 0.2V to (V+) – 1V. For normal
operation, inputs should be limited to this range. The
absolute maximum input voltage is 300mV beyond the
supplies. Thus, inputs greater than the input
common-mode range but less than maximum input voltage, while not valid, will not cause any damage to the op
amp. Furthermore, the inputs may go beyond the power
supplies without phase inversion, as shown in Figure 1,
unlike some other op amps.
IOVERLOAD
10mA max
VOUT
OPAx336
VIN
5kΩ
FIGURE 2. Input Current Protection for Voltages Exceeding
the Supply Voltage.
CAPACITIVE LOAD AND STABILITY
OPA336 series op amps can drive a wide range of capacitive loads. However, all op amps under certain conditions
may become unstable. Op-amp configuration, gain, and
load value are just a few of the factors to consider when
determining stability.
When properly configured, OPA336 series op amps can
drive approximately 10,000pF. An op amp in unity-gain
configuration is the most vulnerable to capacitive load. The
capacitive load reacts with the op amp’s output resistance,
along with any additional load resistance, to create a pole in
the response which degrades the phase margin. In unity gain,
OPA336 series op amps perform well with a pure capacitive
load up to about 300pF. Increasing gain enhances the
amplifier’s ability to drive loads beyond this level.
One method of improving capacitive load drive in the
unity-gain configuration is to insert a 50Ω to 100Ω resistor
inside the feedback loop, as shown in Figure 3. This reduces
ringing with large capacitive loads while maintaining DC
6V
VOUT
RS
100Ω
OPAx336
0V
VOUT
VIN
CL
FIGURE 1. No Phase Inversion with Inputs Greater than the
Power-Supply Voltage.
FIGURE 3. Series Resistor in Unity-Gain Configuration
Improves Capacitive Load Drive.
OPA336, 2336, 4336
SBOS068C
RL
www.ti.com
7
accuracy. For example, with RL = 25kΩ, OPA336 series op
amps perform well with capacitive loads in excess of 1000pF,
as shown in Figure 4. Without RS, capacitive load drive is
typically 350pF for these conditions, as shown in Figure 5.
Figure 5 shows the recommended operating regions for the
OPA336. Decreasing the load resistance generally improves
capacitive load drive. Figure 5 also illustrates how stability
differs depending on where the resistive load is connected.
With G = +1 and RL = 10kΩ connected to VS/2, the OPA336
can typically drive 500pF. Connecting the same load to
ground improves capacitive load drive to 1000pF.
20mV/div
RS = 100Ω, Load = 2kΩ || 1000pF, VS = +5V
Direct Current (DC) error at the output; however, this error
may be insignificant. For instance, with RL = 100kΩ and
RS = 100Ω, there is only about a 0.1% error at the output.
10k
50µs/div
FIGURE 4. Small-Signal Step Response Using Series Resistor to Improve Capacitive Load Drive.
Alternatively, the resistor may be connected in series with
the output outside of the feedback loop. However, if there is
a resistive load parallel to the capacitive load, it and the
series resistor create a voltage divider. This introduces a
8
Capacitive Load (pF)
Operation Above Selected Gain
Curve Not Recommended
G = +1
RL to Ground
G = +2
RL to Ground
1k
G = +1
RL to VS/2
VS = +5V, VO = VS/2
100
5
10
100
Resistive Load (kΩ)
FIGURE 5. Stability—Capacitive Load vs Resistive Load.
OPA336, 2336, 4336
www.ti.com
SBOS068C
PACKAGE OPTION ADDENDUM
www.ti.com
6-Feb-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
HPA00779NA/3K
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
OPA2336E/250
ACTIVE
VSSOP
DGK
8
250
Green (RoHS
& no Sb/Br)
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 85
B36
OPA2336E/2K5
ACTIVE
VSSOP
DGK
8
2500
Green (RoHS
& no Sb/Br)
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 85
B36
OPA2336E/2K5G4
ACTIVE
VSSOP
DGK
8
2500
Green (RoHS
& no Sb/Br)
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 85
B36
OPA2336EA/250
ACTIVE
VSSOP
DGK
8
250
Green (RoHS
& no Sb/Br)
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 85
B36
OPA2336EA/250G4
ACTIVE
VSSOP
DGK
8
250
Green (RoHS
& no Sb/Br)
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 85
B36
OPA2336EA/2K5
ACTIVE
VSSOP
DGK
8
2500
Green (RoHS
& no Sb/Br)
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 85
B36
OPA2336P
ACTIVE
PDIP
P
8
50
Green (RoHS
& no Sb/Br)
NIPDAU
N / A for Pkg Type
-40 to 85
OPA2336P
OPA2336PA
ACTIVE
PDIP
P
8
50
Green (RoHS
& no Sb/Br)
NIPDAU
N / A for Pkg Type
-40 to 85
OPA2336P
A
OPA2336U
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
OPA
2336U
OPA2336U/2K5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
OPA
2336U
OPA2336U/2K5G4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
OPA
2336U
OPA2336UA
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
OPA
2336U
A
OPA2336UA/2K5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
OPA
2336U
A
OPA2336UA/2K5G4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
OPA
2336U
A
OPA2336UG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
OPA
2336U
Addendum-Page 1
A36
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
6-Feb-2020
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
OPA336N/250
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
A36
OPA336N/250G4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
A36
OPA336N/3K
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
A36
OPA336N/3KG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
A36
OPA336NA/250
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
A36
OPA336NA/250G4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
A36
OPA336NA/3K
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
A36
OPA336NA/3KG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
A36
OPA336NJ/250
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
-40 to 85
J36
OPA336NJ/3K
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
-40 to 85
J36
OPA336NJ/3KG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
-40 to 85
J36
OPA336U
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
OPA
336U
OPA336U/2K5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
OPA
336U
OPA336UA
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
OPA
336U
A
OPA336UA/2K5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
OPA
336U
A
OPA4336EA/250
ACTIVE
SSOP
DBQ
16
250
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
OPA
4336EA
OPA4336EA/250G4
ACTIVE
SSOP
DBQ
16
250
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
OPA
4336EA
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
6-Feb-2020
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
OPA4336EA/2K5
ACTIVE
SSOP
DBQ
16
2500
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
OPA
4336EA
OPA4336EA/2K5G4
ACTIVE
SSOP
DBQ
16
2500
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
OPA
4336EA
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
工商网监
湘ICP备2023018690号
