OPA
356
OPA
2356
OPA356 OPA2356
SBOS212A – NOVEMBER, 2001
OPA2
356
200MHz, CMOS OPERATIONAL AMPLIFIER
FEATURES
q UNITY-GAIN BANDWIDTH: 450MHz q WIDE BANDWIDTH: 200MHz GBW q HIGH SLEW RATE: 360V/µs q LOW NOISE: 5.8nV/√Hz q EXCELLENT VIDEO PERFORMANCE: DIFF GAIN: 0.02%, DIFF PHASE: 0.05° 0.1dB GAIN FLATNESS: 75MHz q INPUT RANGE INCLUDES GROUND q RAIL-TO-RAIL OUTPUT (within 100mV) q LOW INPUT BIAS CURRENT: 3pA q THERMAL SHUTDOWN q SINGLE-SUPPLY OPERATING RANGE: 2.5V to 5.5V q MicroSIZE PACKAGES
DESCRIPTION
The OPAx356 series high-speed, voltage-feedback CMOS operational amplifiers are designed for video and other applications requiring wide bandwidth. The OPAx356 is unity gain stable and can drive large output currents. Differential gain is 0.02% and differential phase is 0.05°. Quiescent current is only 8.3mA per channel. OPAx356 is optimized for operation on single or dual supplies as low as 2.5V (±1.25V) and up to 5.5V (±2.75V). Common-mode input range for the OPAx356 extends 100mV below ground and up to 1.5V from V+. The output swing is within 100mV of the rails, supporting wide dynamic range. The OPAx356 series is available in single (SOT23-5 and SO-8), and dual (MSOP-8 and SO-8) versions. Multichannel versions feature completely independent circuitry for lowest crosstalk and freedom from interaction. All are specified over the extended –40°C to +125°C range.
APPLICATIONS
q VIDEO PROCESSING q ULTRASOUND q OPTICAL NETWORKING, TUNABLE LASERS q PHOTODIODE TRANSIMPEDANCE AMPS q ACTIVE FILTERS q HIGH-SPEED INTEGRATORS q ANALOG-TO-DIGITAL (A/D) CONVERTER INPUT BUFFERS q DIGITAL-TO-ANALOG (D/A) CONVERTER OUTPUT AMPLIFIERS q BARCODE SCANNERS q COMMUNICATIONS
OPAx356 RELATED PRODUCTS
FEATURES 200MHz, Rail-to-Rail Output, CMOS, Shutdown 38MHz, Rail-to-Rail Input/Output, CMOS 75MHz, Rail-to-Rail Output 150MHz, Rail-to-Rail Output Differential Input/Output, 3.3V Supply PRODUCT OPAx355 OPAx350 OPAx631 OPAx634 THS412x
V+ –VIN OPA356 +VIN Out
V–
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright © 2001, Texas Instruments Incorporated
www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
Supply Voltage, V+ to V– ................................................................... 7.5V Signal Input Terminals, Voltage(2) .................... (V–) – 0.5V to (V+) + 0.5V Current(2) ..................................................... 10mA Output Short-Circuit(3) .............................................................. Continuous Operating Temperature .................................................. –55°C to +150°C Storage Temperature ...................................................... –65°C to +150°C Junction Temperature .................................................................... +160°C Lead Temperature (soldering, 10s) ............................................... +300°C NOTE: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. (2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should be current limited to 10mA or less. (3) Short-circuit to ground one amplifier per package.
ELECTROSTATIC DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION
PACKAGE DESIGNATOR(1) DBV SPECIFIED TEMPERATURE RANGE –40°C to +125°C PACKAGE MARKING OAAI ORDERING NUMBER(2) OPA356AIDBVT OPA356AIDBVR OPA356AID OPA356AIDR OPA2356AIDGKT OPA2356AIDGKR OPA2356AID OPA2356AIDR TRANSPORT MEDIA, QUANTITY Tape and Reel, 250 Tape and Reel, 3000 Rails, 100 Tape and Reel, 2500 Tape and Reel, 250 Tape and Reel, 2500 Rails, 100 Tape and Reel, 2500
PRODUCT OPA356AIDBV
PACKAGE-LEAD SOT23-5
"
OPA356AID
"
SO-8
"
D
"
–40°C to +125°C
"
OPA356A
"
OPA2356AIDGK
"
MSOP-8
"
DGK
"
–40°C to +125°C
"
AYI
"
OPA2356AID
"
SO-8
"
D
"
–40°C to +125°C
"
OPA2356A
"
"
"
"
"
NOTES: (1) For the most current specifications and package information, refer to our web site at www.ti.com. (2) Models labeled with “T” indicate smaller quantity tape and reel, “R” indicates large quantity tape and reel and “D” indicates rails of specified quantity.
PIN CONFIGURATIONS
Top View
OPA356
OPA2356
OPA356
NC(1) 1 2 3 4 SO 8 7 6 5 NC(1) V+ Out NC(1)
Out A –In A +In A V– 1 2 A 3 B 4 MSOP, SO 8 7 6 5 V+ Out B –In B +In B
Out 1 V– 2
5
V+
–In +In
+In 3 SOT23
4
–In
V–
NOTE: (1) NC means no internal connection.
2
OPA356, 2356
SBOS212A
ELECTRICAL CHARACTERISTICS: VS = +2.7V to +5.5V Single Supply
Boldface limits apply over the specified temperature range, TA = –40°C to +125°C.
At TA = +25°C, RF = 604Ω, RL = 150Ω, Connected to VS/2, unless otherwise noted. OPA356AIDBV, AID, OPA2356AIDGK, AID PARAMETER OFFSET VOLTAGE Input Offset Voltage vs Temperature vs Power Supply INPUT BIAS CURRENT Input Bias Current Input Offset Current NOISE Input Noise Voltage Density Current Noise Density INPUT VOLTAGE RANGE Common-Mode Voltage Range Common-Mode Rejection Ratio INPUT IMPEDANCE Differential Common-Mode OPEN-LOOP GAIN OPA356 OPA2356 FREQUENCY RESPONSE Small-Signal Bandwidth f–3dB f–3dB f–3dB f–3dB GBW f0.1dB SR VS = +5V, 0.3V < VO < 4.7V VS = +5V, 0.3V < VO < 4.7V VS = +5V, 0.4V < VO < 4.6V G = +1, VO = 100mVp-p, RF = 0Ω G = +2, VO = 100mVp-p, RL = 50Ω G = +2, VO = 100mVp-p, RL = 150Ω G = +2, VO = 100mVp-p, RL = 1kΩ G = +10, RL = 1kΩ G = +2, VO = 100mVp-p, RF = 560Ω VS = +5V, G = +2, 4V Output Step G = +2, VO = 200mVp-p, 10% to 90% G = +2, VO = 2Vp-p, 10% to 90% VS = +5V, G = +2, 2V Output Step VS = +5V, G = +2, 2V Output Step VIN • Gain = VS G = +2, f = 1MHz, VO = 2Vp-p, RL = 200Ω G = +2, f = 1MHz, VO = 2Vp-p, RL = 200Ω NTSC, RL = 150Ω NTSC, RL = 150Ω f = 5MHz VS = +5V, RL = 150Ω, AOL > 84dB VS = +5V, RL = 1kΩ IO = ±100mA IO IO IO VS = +5V VS = +3V f < 100kHz VS IQ VS = +5V, IO = 0 Specified Temperature Range 2.7 2.5 to 5.5 8.3 ±60 ±100 ±80 +250/ –200 0.02 5.5 11 14 84 80 80 VOS dVOS/dT PSRR IB IOS en in VCM CMRR f = 1MHz f = 1MHz (V–) – 0.1 66 66 CONDITION VS = +5V Specified Temperature Range Specified Temperature Range VS = +2.7V to +5.5V, VCM = VS/2 – 0.15V MIN TYP ±2 MAX ±9 UNITS mV mV µV/°C µV/V pA pA nV/√Hz fA/√Hz (V+) – 1.5 80 V dB dB Ω || pF Ω || pF dB dB dB MHz MHz MHz MHz MHz MHz V/µs ns ns ns ns ns dBc dBc % degrees dB 0.3 1 V V V mA mA mA mA Ω V V mA mA
±7 ±80
3 ±1 5.8 50
±15
±350 ±50 ±50
VS = +5.5V, –0.1V < VCM < +4.0V Specified Temperature Range
1013 || 1.5 1013 || 1.5 92
Gain-Bandwidth Product Bandwidth for 0.1dB Gain Flatness Slew Rate Rise-and-Fall Time Settling Time, 0.1% 0.01% Overload Recovery Time Harmonic Distortion 2nd Harmonic 3rd Harmonic Differential Gain Error Differential Phase Error Channel-to-Channel Crosstalk OUTPUT Voltage Output Swing from Rail Voltage Output Swing from Rail Voltage Output Swing from Rail Ouput Current, Continuous(1) Maximum Output Current, Peak(1) Maximum Output Current, Peak(1) Short Circuit Current Closed-Loop Output Impedance POWER SUPPLY Specified Voltage Range Operating Voltage Range Quiescent Current (per amplifier)
450 100 170 200 200 75 300/–360 2.4 8 30 120 8 –81 –93 0.02 0.05 –90 0.2 0.1 0.8
OPA2356
OPA356, 2356
SBOS212A
3
ELECTRICAL CHARACTERISTICS: VS = +2.7V to +5.5V Single Supply (Cont.)
Boldface limits apply over the specified temperature range, TA = –40°C to +125°C.
At TA = +25°C, RF = 604Ω, RL = 150Ω, Connected to VS/2, unless otherwise noted. OPA356AIDBV, AID, OPA2356AIDGK, AID PARAMETER THERMAL SHUTDOWN Junction Temperature Shutdown Reset from Shutdown TEMPERATURE RANGE Specified Range Operating Range Storage Range Thermal Resistance SOT23-5, MSOP-8 SO-8 –40 –55 –65 CONDITION MIN TYP MAX UNITS
160 140 125 150 150 150 125
°C °C °C °C °C °C/W °C/W °C/W
θJA
NOTES: (1) See typical characteristic “Output Voltage Swing vs Output Current”.
4
OPA356, 2356
SBOS212A
TYPICAL CHARACTERISTICS
At TA = +25°C and VS = 5V, G = +2, RF = 604Ω, RL = 150Ω connected to VS/2, unless otherwise noted.
NON-INVERTING SMALL-SIGNAL FREQUENCY RESPONSE 6 VO = 0.1Vp-p 3
Normalized Gain (dB)
INVERTING SMALL-SIGNAL FREQUENCY RESPONSE 3 VO = 0.1Vp-p 0
Normalized Gain (dB)
G = +1 RF = 0
G = –1 G = –5 G = –2
0 –3 G = +2 –6 G = +5 –9 G = +10 –12 –15 100k
–3 –6
G = –10 –9 –12 –15 100k
1M
10M Frequency (Hz)
100M
1G
1M
10M Frequency (Hz)
100M
1G
NON-INVERTING SMALL-SIGNAL STEP RESPONSE
NON-INVERTING LARGE-SIGNAL STEP RESPONSE
Time (20ns/div)
Output Voltage (500mV/div)
Output Voltage (50mV/div)
G = +2
G = +2
Time (20ns/div)
0.1dB GAIN FLATNESS FOR VARIOUS RF 0.5 0.4
Normalized Gain (dB)
HARMONIC DISTORTION vs OUTPUT VOLTAGE –50 f = 1MHz RL = 200Ω
0.3 0.2 0.1 0 –0.1 –0.2 –0.3 –0.4 –0.5 1 10 Frequency (MHz) RF = 560Ω
Harmonic Distortion (dBc)
VO = 0.1Vp-p CL = 0pF
RF = 604Ω
–60
–70 2nd Harmonic
–80
RF = 500Ω
–90
3rd Harmonic
–100 100 0 1 2 Output Voltage (Vp-p) 3 4
OPA356, 2356
SBOS212A
5
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C and VS = 5V, G = +2, RF = 604Ω, RL = 150Ω connected to VS/2, unless otherwise noted.
HARMONIC DISTORTION vs NON-INVERTING GAIN –50 VO = 2Vp-p f = 1MHz RL = 200Ω –50
HARMONIC DISTORTION vs INVERTING GAIN
Harmonic Distortion (dBc)
–60
Harmonic Distortion (dBc)
–60
VO = 2Vp-p f = 1MHz RL = 200Ω
–70 2nd Harmonic –80 3rd Harmonic –90
–70 2nd Harmonic –80 3rd Harmonic –90
–100 1 Gain (V/V) 10
–100 1 Gain (V/V) 10
HARMONIC DISTORTION vs FREQUENCY –50 VO = 2Vp-p RL = 200Ω 2nd Harmonic –70
HARMONIC DISTORTION vs LOAD RESISTANCE –50 VO = 2Vp-p f = 1MHz
Harmonic Distortion (dBc)
Harmonic Distortion (dBc)
–60
–60
–70
–80 3rd Harmonic –90
–80
2nd Harmonic
–90 3rd Harmonic
–100 100k
–100
1M Frequency (Hz) 10M
100 R L (Ω )
1k
Voltage Noise (nV/√Hz), Current Noise (fA/√Hz)
INPUT VOLTAGE AND CURRENT NOISE SPECTRAL DENSITY vs FREQUENCY 10k
FREQUENCY RESPONSE FOR VARIOUS RL 3 RL = 10kΩ 0
1k Voltage Noise 100 Current Noise
Normalized Gain (dB)
–3 –6
CL = 0pF VO = 0.1Vp-p
RL = 50Ω RL = 150Ω
–9 RL = 1kΩ –12
10
1 10 100 1k 10k 100k 1M 10M 100M Frequency (Hz)
–15 100k
1M
10M Frequency (Hz)
100M
1G
6
OPA356, 2356
SBOS212A
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C and VS = 5V, G = +2, RF = 604Ω, RL = 150Ω connected to VS/2, unless otherwise noted.
FREQUENCY RESPONSE FOR VARIOUS CL 9 6
Normalized Gain (dB)
RECOMMENDED RS vs CAPACITIVE LOAD 120
R S = 0Ω VO = 0.1Vp-p
CL = 100pF CL = 47pF 100 80
RS (Ω)
3 0 –3
60 40
CL = 5.6pF –6 –9 –12 –15 100k
VIN OPA356 604Ω
RS VO CL 1kΩ
20 0 1M 10M Frequency (Hz) 100M 1G 1
604Ω
(1kΩ is Optional)
10 Capacitive Load (pF)
100
FREQUENCY RESPONSE vs CAPACITIVE LOAD 3 0
Normalized Gain (dB)
COMMON-MODE REJECTION RATIO AND POWER-SUPPLY REJECTION RATIO vs FREQUENCY 100 90 –PSRR +PSRR
G = +2 VO = 0.1Vp-p
CMRR, PSRR (dB)
–3 –6 –9 –12 –15 1M
VIN OPA356 604Ω 604Ω
CL = 100pF RS = 24Ω
RS VO CL 1kΩ
CL = 5.6pF RS = 80Ω
80 70 60 50 40 30 20 10 0 CMRR
CL = 47pF RS = 36Ω
(1kΩ is Optional)
10M 100M Frequency (Hz)
1G
10k
100k
1M 10M Frequency (Hz)
100M
1G
OPEN-LOOP GAIN AND PHASE 180 160
Open-Loop Phase (degrees) Open-Loop Gain (dB)
0.40 0.35
dG/dP (%/degrees)
COMPOSITE VIDEO DIFFERENTIAL GAIN AND PHASE
140 120 100 80 60 40 20 0 –20 1k
RL = 1kΩ Phase
0.30 0.25 0.20 0.15 0.10 0.05 0 dG dP
RL = 150Ω
Gain
10k
100k 1M 10M Frequency (Hz)
100M
1G
1
2 3 Number of 150Ω Loads
4
OPA356, 2356
SBOS212A
7
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C and VS = 5V, G = +2, RF = 604Ω, RL = 150Ω connected to VS/2, unless otherwise noted.
INPUT BIAS CURRENT vs TEMPERATURE 10n
3
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT FOR VS = 3V
25°C
Input Bias Current (pA)
Output Voltage (V)
1n
–55°C
2 125°C 125°C 1 25°C –55°C Continuous currents above 60mA are not recommended
100
10
1 –55 –35 –15 5 25 45 65 Temperature (°C) 85 105 125 135
0 0 30 60 90 Output Current (mA) 120 150
SUPPLY CURRENT vs TEMPERATURE 14 12
Supply Current (mA)
5
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT FOR VS = 5V 25°C –55°C
VS = 5.5V 10 8 6 VS = 3V 4 VS = 5V 2 0 –55 –35 –15 5 25 45 65 Temperature (°C) 85 105 125 135 VS = 2.5V
Output Voltage (V)
4 125°C 3 Continuous currents above 60mA are not recommended 125°C –55°C
2
1 25°C 0 0 50 100 150 Output Current (mA) 200
250
CLOSED-LOOP OUTPUT IMPEDANCE vs FREQUENCY 100
6
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY VS = 5.5V
Output Impedance (Ω)
10
Output Voltage (Vp-p)
5 4 3 VS = 2.7V 2 1 0 Maximum Output Voltage without Slew-Rate Induced Distortion
1
OPA356
0.1
604Ω
ZO
0.01
604Ω
0.001 10k 100k 1M 10M Frequency (Hz) 100M 1G
1
10 Frequency (MHz)
100
8
OPA356, 2356
SBOS212A
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C and VS = 5V, G = +2, RF = 604Ω, RL = 150Ω connected to VS/2, unless otherwise noted.
OUTPUT SETTLING TIME TO 0.1% 0.2 VO = 2Vp-p 0.1 0 –0.1 –0.2 –0.3 –0.4 0 5 10 15 20 25 30 Time (ns) 35 40 45 50
Open-Loop Gain (dB)
OPEN-LOOP GAIN vs TEMPERATURE 110 R L = 1 kΩ 100
Output Error (%)
90 RL = 150Ω 80
70
60 –55 –35 –15 5 25 45 65 Temperature (°C) 85 105 125 135
OFFSET VOLTAGE PRODUCTION DISTRIBUTION 20 18
Percent of Amplifiers (%)
100
COMMON-MODE REJECTION RATIO AND POWER-SUPPLY REJECTION RATIO vs TEMPERATURE
Power-Supply Rejection Ratio 90
16 14 12 10 8 6 4 2 0 –9 –8 –7 –6 –5 –4 –3 –2 –1 0 1 2 3 4 5 6 7 8 9 Offset Voltage (mV)
CMRR, PSRR (dB)
80
Common-Mode Rejection Ratio
70
60
50 –55 –35 –15 5 25 45 65 Temperature (°C) 85 105 125 135
CHANNEL-TO-CHANNEL CROSSTALK 0 Crosstalk, Input-Referred (dB) –20 –40 –60 –80 –100 –120 100k
OPA2356 (dual)
1M Frequency (Hz)
10M
100M
OPA356, 2356
SBOS212A
9
APPLICATIONS INFORMATION
The OPAx356 series is a CMOS, high-speed, voltage feedback, operational amplifier designed for video and other general-purpose applications. It is available as a single or dual op amp. The amplifier features a 200MHz gain bandwidth and 360V/µs slew rate, but it is unity-gain stable and can be operated as a +1V/V voltage follower. Its input common-mode voltage range includes ground, allowing the OPAx356 to be used in virtually any single-supply application up to a supply voltage of +5.5V.
Parameters that vary significantly over supply voltage or temperature are shown in the “Typical Characteristics” section of this data sheet.
OUTPUT DRIVE
The OPAx356 output stage is capable of driving a standard back-terminated 75Ω video cable. By back-terminating a transmission line, it does not exhibit a capacitive load to its driver. A properly back-terminated 75Ω cable does not appear as capacitance; it presents only a 150Ω resistive load to the OPAx356 output. The output stage can supply high short-circuit current (typically over 200mA). Therefore, an on-chip thermal shutdown circuit is provided to protect the OPAx356 from dangerously high junction temperatures. At 160°C, the protection circuit will shut down the amplifier. Normal operation will resume when the junction temperature cools to below 140°C. NOTE: It is not recommended to run a continuous DC current in excess of ±60mA. Refer to the graph of “Output Voltage Swing vs Output Current”, shown in the “Typical Characteristics” section of this data sheet.
PCB LAYOUT
Good high-frequency PC board layout techniques should be employed for the OPAx356. Generous use of ground planes, short direct signal traces, and a suitable bypass capacitor located at the V+ pin will assure clean, stable operation. Large areas of copper also provide a means of dissipating heat that is generated within the amplifier in normal operation. Sockets are definitely not recommended for use with any high-speed amplifier. A 10µF ceramic bypass capacitor is the minimum recommended value; adding a 1µF or larger tantalum capacitor in parallel can be beneficial when driving a low-resistance load. Providing adequate bypass capacitance is essential to achieving very low harmonic and intermodulation distortion.
INPUT AND ESD PROTECTION
All OPAx356 pins are static protected with internal ESD protection diodes tied to the supplies, as shown in Figure 1. These diodes will provide overdrive protection if the current is externally limited to 10mA by the source or by a resistor.
OPERATING VOLTAGE
The OPAx356 is specified over a power-supply range of +2.7V to +5.5V (±1.35 to ±2.75V). However, the supply voltage may range from +2.5V to +5.5V (±1.25V to ±2.75V). Supply voltages higher than 7.5V (absolute maximum) can permanently damage the amplifier.
+V CC
External Pin
Internal Circuitry
–V CC
FIGURE 1. Internal ESD Protection.
10
OPA356, 2356
SBOS212A
PACKAGE DRAWINGS
MPDS018D – FEBRUARY 1996 – REVISED JANUARY 2001
DBV (R-PDSO-G5)
PLASTIC SMALL-OUTLINE
0,95 5 4
0,50 0,30
0,20 M
1,70 1,50
3,00 2,60
0,15 NOM
1 3,00 2,80
3
Gage Plane
0,25 0°–8° 0,55 0,35
Seating Plane 1,45 0,95 0,05 MIN 0,10 4073253-4/F 10/00
NOTES: A. B. C. D.
All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion. Falls within JEDEC MO-178
OPA356, 2356
SBOS212A
11
PACKAGE DRAWINGS (Cont.)
MPDS028B – JUNE 1997 – REVISED SEPTEMBER 2001
DGK (R-PDSO-G8)
0,38 0,25 8 5
PLASTIC SMALL-OUTLINE PACKAGE
0,65
0,08 M
0,15 NOM 3,05 2,95 4,98 4,78
Gage Plane 0,25 1 3,05 2,95 4 0°– 6° 0,69 0,41
Seating Plane 1,07 MAX 0,15 0,05 0,10
4073329/C 08/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion. Falls within JEDEC MO-187
12
OPA356, 2356
SBOS212A
PACKAGE DRAWINGS (Cont.)
MSOI002B – JANUARY 1995 – REVISED SEPTEMBER 2001
D (R-PDSO-G**)
8 PINS SHOWN 0.050 (1,27) 8 5 0.020 (0,51) 0.014 (0,35) 0.010 (0,25)
PLASTIC SMALL-OUTLINE PACKAGE
0.244 (6,20) 0.228 (5,80) 0.157 (4,00) 0.150 (3,81)
0.008 (0,20) NOM
Gage Plane 1 A 4 0°– 8° 0.044 (1,12) 0.016 (0,40)
0.010 (0,25)
Seating Plane 0.069 (1,75) MAX 0.010 (0,25) 0.004 (0,10) 0.004 (0,10)
PINS ** DIM A MAX A MIN
8 0.197 (5,00) 0.189 (4,80)
14 0.344 (8,75) 0.337 (8,55)
16 0.394 (10,00) 0.386 (9,80)
4040047/E 09/01 NOTES: A. B. C. D. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15). Falls within JEDEC MS-012
OPA356, 2356
SBOS212A
13
PACKAGE OPTION ADDENDUM
www.ti.com
3-Oct-2003
PACKAGING INFORMATION
ORDERABLE DEVICE OPA2356AID OPA2356AIDGKR OPA2356AIDGKT OPA2356AIDR OPA356AID OPA356AIDBVR OPA356AIDBVT OPA356AIDR STATUS(1) ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE PACKAGE TYPE SOIC VSSOP VSSOP SOIC SOIC SOP SOP SOIC PACKAGE DRAWING D DGK DGK D D DBV DBV D PINS 8 8 8 8 8 5 5 8 PACKAGE QTY 100 2500 250 2500 100 3000 250 2500
(1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2003, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless
