0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
OPA4342

OPA4342

  • 厂商:

    BURR-BROWN(德州仪器)

  • 封装:

  • 描述:

    OPA4342 - Low Cost, Low Power, Rail-to-Rail OPERATIONAL AMPLIFIERS MicroAmplifier ™ Series - Burr-Br...

  • 数据手册
  • 价格&库存
OPA4342 数据手册
® OPA 434 2 OPA 342 OPA342 OPA2342 OPA4342 OPA 234 2 OPA ® OPA 342 434 2 For most current data sheet and other product information, visit www.burr-brown.com Low Cost, Low Power, Rail-to-Rail OPERATIONAL AMPLIFIERS MicroAmplifier ™ Series FEATURES LOW QUIESCENT CURRENT: 150µA typ RAIL-TO-RAIL INPUT RAIL-TO-RAIL OUTPUT (within 1mV) SINGLE SUPPLY CAPABILITY LOW COST MicroSIZE PACKAGE OPTIONS: SOT23-5 MSOP-8 TSSOP-14 q BANDWIDTH: 1MHz q SLEW RATE: 1V/µs q THD + NOISE: 0.006% q q q q q q DESCRIPTION The OPA342 series rail-to-rail CMOS operational amplifiers are designed for low cost, low power, miniature applications. They are optimized to operate on a single supply as low as 2.5V with an input common-mode voltage range that extends 300mV beyond the supplies. Rail-to-rail input/output and high-speed operation make them ideal for driving sampling Analog-to-Digital Converters (ADC). They are also well suited for general purpose and audio applicaitons and providing I/V conversion at the output of Digital-to-Analog Converters (DAC). Single, dual and quad versions have identical specs for design flexibility. The OPA342 series offers excellent dynamic response with a quiescent current of only 250µA max. Dual and quad designs feature completely independent circuitry for lowest crosstalk and freedom from interaction. SINGLE OPA342 DUAL OPA2342 QUAD OPA4342 APPLICATIONS q q q q q q q q COMMUNICATIONS PCMCIA CARDS DATA ACQUISITION PROCESS CONTROL AUDIO PROCESSING ACTIVE FILTERS TEST EQUIPMENT CONSUMER ELECTRONICS PACKAGE SOT23-5 MSOP-8 SO-8 TSSOP-14 SO-14 DIP-14 SPICE MODEL available at www.burr-brown.com. International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 Twx: 910-952-1111 • Internet: http://www.burr-brown.com/ • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132 © 1999 Burr-Brown Corporation PDS-1485B Printed in U.S.A. June, 2000 SPECIFICATIONS: VS = 2.7V to 5.5V At TA = +25°C, RL = 10kΩ connected to VS /2 and VOUT = VS /2, unless otherwise noted. Boldface limits apply over the temperature range, TA = –40°C to +85°C. OPA342NA, UA OPA2342EA, UA OPA4342EA, UA, PA PARAMETER OFFSET VOLTAGE Input Offset Voltage TA = –40°C to +85°C vs Temperature vs Power Supply TA = –40°C to +85°C Channel Separation, dc f = 1kHz INPUT BIAS CURRENT Input Bias Current TA = –40°C to +85°C Input Offset Current NOISE Input Voltage Noise, f = 0.1Hz to 50kHz Input Voltage Noise Density, f = 1kHz Current Noise Density, f = 1kHz INPUT VOLTAGE RANGE Common-Mode Voltage Range Common-Mode Rejection Ratio TA = –40°C to +85°C Common-Mode Rejection Ratio TA = –40°C to +85°C Common-Mode Rejection Ratio TA = –40°C to +85°C INPUT IMPEDANCE Differential Common-Mode OPEN-LOOP GAIN Open-Loop Voltage Gain TA = –40°C to +85°C TA = –40°C to +85°C FREQUENCY RESPONSE Gain-Bandwidth Product GBW Slew Rate SR Settling Time, 0.1% 0.01% Overload Recovery Time Total Harmonic Distortion + Noise, f = 1kHz THD+N OUTPUT Voltage Output Swing from Rail(2) TA = –40°C to +85°C TA = –40°C to +85°C Short-Circuit Current Capacitive Load Drive POWER SUPPLY Specified Voltage Range Operating Voltage Range Quiescent Current (per amplifier) TA = –40°C to +85°C TEMPERATURE RANGE Specified Range Operating Range Storage Range Thermal Resistance SOT23-5 Surface Mount MSOP-8 Surface Mount SO-8 Surface Mount TSSOP-14 Surface Mount SO-14 Surface Mount DIP-14 AOL RL RL RL RL = 100kΩ, 10mV < VO < (V+) – 10mV = 100kΩ, 10mV < VO < (V+) – 10mV = 5kΩ, 400mV < VO < (V+) – 400mV = 5kΩ, 400mV < VO < (V+) – 400mV CL = 100pF G=1 VS = 5.5V, 2V Step VS = 5.5V, 2V Step VIN • G = VS VS = 5.5V, VO = 3Vp-p(1), G = 1 RL = 100kΩ, AOL ≥ 96dB RL = 100kΩ, AOL ≥ 104dB RL = 100kΩ, AOL ≥ 100dB RL = 5kΩ, AOL ≥ 96dB RL = 5kΩ, AOL ≥ 90dB Per Channel 104 100 96 90 VOS dVOS/dT PSRR CONDITION VCM = VS /2 MIN TYP ±1 MAX ±6 UNITS mV mV µV/°C µV/V µV/V µV/V dB pA pA pA µVrms nV/√Hz fA/√Hz (V+) + 0.3 88 78 74 V dB dB dB dB dB dB Ω || pF Ω || pF dB dB dB dB MHz V/µs µs µs µs % mV mV mV mV mV mA ±1 ±3 ±6 VS = 2.7V to 5.5V, VCM < (V+) -1.8V VS = 2.7V to 5.5V, VCM < (V+) -1.8V 30 0.2 132 200 250 IB IOS ±0.2 See Typical Curve ±0.2 8 30 0.5 –0.3 76 74 66 64 62 60 ±10 ±10 en in VCM CMRR CMRR CMRR VS = +5.5V, –0.3V < VCM < (V+) - 1.8 VS = +5.5V, –0.3V < VCM < (V+) - 1.8 VS = +5.5V, –0.3V < VCM < 5.8V VS = +5.5V, –0.3V < VCM < 5.8V VS = +2.7V, –0.3V < VCM < 3V VS = +2.7V, –0.3V < VCM < 3V 1013 || 3 1013 || 6 124 114 1 1 5 8 2.5 0.006 1 3 20 ±15 See Typical Curve 2.7 5.5 2.5 to 5.5 150 250 300 +85 +125 +150 200 150 150 100 100 100 10 10 400 400 I SC CLOAD VS IQ IO = 0A V V µA µA °C °C °C °C/W °C/W °C/W °C/W °C/W °C/W –40 –55 –65 θJA NOTE: (1) VOUT = 0.25V to 3.25V. (2) Output voltage swings are measured between the output and power-supply rails. ® OPA342, 2342, 4342 2 ABSOLUTE MAXIMUM RATINGS(1) Supply Voltage, V+ to V- ................................................................... 7.5V Signal Input Terminals, Voltage(2) ..................... (V–) –0.5V to (V+) +0.5V Current(2) .................................................... 10mA Output Short-Circuit(3) .............................................................. Continuous Operating Temperature .................................................. –55°C to +125°C Storage Temperature ..................................................... –65°C to +150°C Junction Temperature ...................................................................... 150°C Lead Temperature (soldering, 10s) ................................................. 300°C ESD Tolerance (Human Body Model) ............................................ 4000V NOTES: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only. Functional operation of the device at these conditions, or beyond the specified operating conditions, is not implied. (2) Input terminals are diode-clamped to the power supply rails. Input signals that can swing more than 0.5V beyond the supply rails should be current-limited to 10mA or less. (3) Short-circuit to ground, one amplifier per package. ELECTROSTATIC DISCHARGE SENSITIVITY This integrated circuit can be damaged by ESD. Burr-Brown recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PACKAGE/ORDERING INFORMATION PACKAGE DRAWING NUMBER 331 SPECIFIED TEMPERATURE RANGE –40°C to +85°C –40°C to +85°C PACKAGE MARKING B42 ORDERING NUMBER(1) OPA342NA /250 OPA342NA /3K OPA342UA OPA342UA /2K5 OPA2342EA /250 OPA2342EA /2K5 OPA2342UA OPA2342UA /2K5 OPA4342EA /250 OPA4342EA /2K5 OPA4342UA OPA4342UA /2K5 OPA4342PA TRANSPORT MEDIA Tape and Reel Tape and Reel Rails Tape and Reel Tape and Reel Tape and Reel Rails Tape and Reel Tape and Reel Tape and Reel Rails Tape and Reel Rails PRODUCT OPA342NA PACKAGE SOT23-5 " OPA342UA " SO-8 " 182 " " " OPA342UA " OPA2342EA " MSOP-8 " 337 " C42 –40°C to +85°C " OPA2342UA " SO-8 " 182 " –40°C to +85°C " OPA2342UA " OPA4342EA " TSSOP-14 " 357 " –40°C to +85°C " OPA4342EA " OPA4342UA " SO-14 " 235 " –40°C to +85°C " OPA4342UA " OPA4342PA " DIP-14 " 010 " –40°C to +85°C " OPA4342PA NOTE: (1) Models with a slash (/) are available only in Tape and Reel in the quantities indicated (e.g., /3K indicates 3000 devices per reel). Ordering 3000 pieces of “OPA342NA/3K” will get a single 3000-piece Tape and Reel. ® 3 OPA342, 2342, 4342 TYPICAL PERFORMANCE CURVES At TA = +25°C, VS = +5V, and RL = 10kΩ connected to VS/2, unless otherwise noted. OPEN-LOOP GAIN/PHASE vs FREQUENCY 120 100 80 Gain (dB) POWER SUPPLY AND COMMON-MODE REJECTION RATIO vs FREQUENCY 0 30 60 90 120 Gain 150 180 10M Phase (°) Rejection Ratio (dB) 100 +PSRR 80 –PSRR CMRR Phase 60 60 40 20 0 0.1 1 10 100 1k 10k 100k 1M Frequency (Hz) 40 20 10 10 100 1k Frequency (Hz) 10k 100k MAXIMUM OUTPUT VOLTAGE vs FREQUENCY 6 VS = +5.5V VS = +5V 4 3 2 1 0 10k 100k Frequency (Hz) 1M VS = +2.7V 140 CHANNEL SEPARATION vs FREQUENCY Maximum Output Voltage (Vp-p) 5 Channel Separation (dB) 120 100 80 Dual and quad devices. G = 1, all channels. Quad measured channel A to D or B to C—other combinations yield improved rejection. 100 1k 10k Frequency (Hz) 100k 1M 60 VOLTAGE AND CURRENT NOISE SPECTRAL DENSITY vs FREQUENCY 10000 100 1 TOTAL HARMONIC DISTORTION + NOISE vs FREQUENCY Voltage Noise (nV/√Hz) 1000 VN 100 IN 10 Current Noise (fA/√Hz) 0.1 THD+N (%) 1 0.010 10 1 10 100 1k 10k 100k 1M Frequency (Hz) 0.1 10M 0.001 20 100 1k Frequency (Hz) 10k 20k ® OPA342, 2342, 4342 4 TYPICAL PERFORMANCE CURVES (Cont.) At TA = +25°C, VS = +5V, and RL = 10kΩ connected to VS/2, unless otherwise noted. OPEN-LOOP GAIN, COMMON-MODE REJECTION RATIO, AND POWER SUPPLY REJECTION vs TEMPERATURE 140 AOL 120 AOL, CMRR, PSRR (dB) 10000 INPUT BIAS CURRENT vs TEMPERATURE 100 CMRR 80 60 40 20 0 –75 –50 –25 0 25 50 75 100 125 150 Temperature (°C) PSRR Input Bias Current (pA) 1000 100 10 1 0.1 –75 –50 –25 0 25 50 75 100 125 Temperature (°C) QUIESCENT CURRENT AND SHORT-CIRCUIT CURRENT vs TEMPERATURE 200 175 Quiescent Current (µA) SLEW RATE vs TEMPERATURE 40 IQ 35 30 25 +ISC 20 –ISC 15 10 5 0 125 Short-Circuit Current (mA) 1.2 –SR 1 150 135 100 75 50 25 0 –75 –50 –25 0 25 50 75 100 Temperature (°C) Slew Rate (V/µs) 0.8 0.6 0.4 0.2 0 –75 –50 –25 0 25 50 75 +SR 100 125 Temperature (°C) INPUT BIAS CURRENT vs COMMON-MODE VOLTAGE 6 4 QUIESCENT CURRENT AND SHORT-CIRCUIT CURRENT vs SUPPLY VOLTAGE 160 +ISC 20 Quiescent Current (µA) Input Bias Current (pA) 2 0 –2 –4 –6 –1 0 V– Supply V+ Supply 155 15 150 –ISC 10 IQ 145 5 Input voltage ≤ –0.3V can cause op amp output to lock up. See text. 140 1 2 3 4 5 6 0 2 3 4 Supply Voltage (V) 5 6 Common-Mode Voltage (V) 5 OPA342, 2342, 4342 Short-Circuit Current (mA) ® TYPICAL PERFORMANCE CURVES (Cont.) At TA = +25°C, VS = +5V, and RL = 10kΩ connected to VS/2, unless otherwise noted. OUTPUT VOLTAGE SWING vs OUTPUT CURRENT V+ 120 OPEN-LOOP GAIN vs OUTPUT VOLTAGE SWING (V+) – 1 (V+) – 2 2 ≈ –40°C 25°C 85°C 0 5 10 Output Current (mA) 15 ≈ 20 Open-Loop Gain (dB) Output Voltage (V) –40°C 25°C 85°C 110 RL = 100kΩ 100 RL = 5kΩ 1 90 0 80 120 100 80 60 40 20 0 Output Voltage Swing from Rail (mV) OFFSET VOLTAGE PRODUCTION DISTRIBUTION 24 20 Percent of Amplifiers (%) OFFSET VOLTAGE DRIFT PRODUCTION DISTRIBUTION 18 16 Percent of Amplifiers (%) Typical production distribution of packaged units. 14 12 10 8 6 4 2 Typical production distribution of packaged units. 16 12 8 4 0 –6 –5.4 –4.8 –4.2 –3.6 –3 –2.4 –1.8 –1.2 –0.6 0 0.6 1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 6 0 –10 –9 –8 –7 –6 –5 –4 –3 –2 –1 0 1 2 3 4 5 6 7 8 9 10 Offset Voltage (mV) Offset Voltage Drift (µV/°C) QUIESCENT CURRENT PRODUCTION DISTRIBUTION 24 20 16 12 8 4 SETTLING TIME vs CLOSED-LOOP GAIN 400 350 300 Percent of Amplifiers (%) Settling Time (µs) 250 200 150 100 50 0.01% 0.1% 0 0
OPA4342 价格&库存

很抱歉,暂时无法提供与“OPA4342”相匹配的价格&库存,您可以联系我们找货

免费人工找货