PCI1420 GHK/PDV
www.ti.com
SLLA228 – MONTH 2003
PC Card Controllers
FEATURES
•
•
•
•
•
•
•
•
•
Fully compatible with the Intel™ 430TX
(Mobile Triton II) chipset
A 208-pin Low-Profile QFP (PDV),
209-terminal MicroStar BGA™ package
(GHK), or the 209-terminal lead-free (Pb,
atomic number 82) MicroStar BGA™ package
(ZHK).
3.3-V core logic with universal PCI interfaces
compatible with 3.3-V and 5-V PCI signaling
environments
Mix-and-match 5-V/3.3-V 16-bit PC Cards and
3.3-V CardBus Cards
Two PC Card or CardBus slots with hot
insertion and removal
Uses serial interface to TI™ TPS2206/2216
dual-slot PC Card power switch
Burst transfers to maximize data throughput
with CardBus Cards
Parallel PCI interrupts, parallel ISA IRQ and
parallel PCI interrupts, serial ISA IRQ with
parallel PCI interrupts, and serial ISA IRQ and
PCI interrupts
Serial EEPROM interface for loading
subsystem ID and subsystem vendor ID
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Pipelined architecture allows greater than
130M bps throughput from CardBus-to-PCI
and from PCI-to-CardBus
Up to five general-purpose I/Os
Programmable output select for CLKRUN
Multifunction PCI device with separate
configuration space for each socket
Five PCI memory windows and two I/O
windows available for each R2 socket
Two I/O windows and two memory windows
available to each CardBus socket
Exchangeable Card Architecture (ExCA)
compatible registers are mapped in memory
and I/O space
Intel 82365SL-DF and 82365SL register
compatible
Distributed DMA (DDMA) and PC/PCI DMA
16-Bit DMA on both PC Card sockets
Ring indicate, SUSPEND, PCI CLKRUN, and
CardBus CCLKRUN
Socket activity LED pins
PCI Bus Lock (LOCK)
Advanced Submicron, Low-Power CMOS
Technology
Internal Ring Oscillator
DESCRIPTION
The TI PCI1420, the industry’s first 208-pin controller to meet the PCI Bus Power Management Interface
Specification for PCI to CardBus Bridges, is a high-performance PCI-to-CardBus controller that supports two
independent card sockets compliant with the 1997 PC Card Standard. The PCI1420 provides features that make
it the best choice for bridging between PCI and PC Cards in both notebook and desktop computers. The 1997
PC Card Standard retains the 16-bit PC Card specification defined in PCI Local Bus Specification and defines
the new 32-bit PC Card, CardBus, capable of full 32-bit data transfers at 33 MHz. The PCI1420 supports any
combination of 16-bit and CardBus PC Cards in the two sockets, powered at 5 V or 3.3 V, as required.
The PCI1420 is compliant with the PCI Local Bus Specification, and its PCI interface can act as either a PCI
master device or a PCI slave device. The PCI bus mastering is initiated during 16-bit PC Card DMA transfers or
CardBus PC Card bridging transactions. The PCI1420 is also compliant with the latest PCI Bus Power
Management Interface Specification.
All card signals are internally buffered to allow hot insertion and removal without external buffering. The PCI1420
is register compatible with the Intel 82365SL-DF and 82365SL ExCA controllers. The PCI1420 internal data path
logic allows the host to access 8-, 16-, and 32-bit cards using full 32-bit PCI cycles for maximum performance.
Independent buffering and a pipeline architecture provide an unsurpassed performance level with sustained
bursting. The PCI1420 can also be programmed to accept fast posted writes to improve system-bus utilization.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MicroStar BGA, TI are trademarks of Texas Instruments.
Intel is a trademark of Intel Corporation.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003, Texas Instruments Incorporated
PCI1420 GHK/PDV
www.ti.com
SLLA228 – MONTH 2003
Multiple system-interrupt signaling options are provided, including: parallel PCI, parallel ISA, serialized ISA, and
serialized PCI. Furthermore, general-purpose inputs and outputs are provided for the board designer to
implement sideband functions. Many other features designed into the PCI1420, such as socket activity
light-emitting diode (LED) outputs, are discussed in detail throughout the design specification.
An advanced complementary metal-oxide semiconductor (CMOS) process achieves low system power
consumption while operating at PCI clock rates up to 33 MHz. Several low-power modes enable the host power
management system to further reduce power consumption.
NOTE:
This product is for high-volume PC applications only. For a complete datasheet or
more information contact support@ti.com.
2
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
(3)
Device Marking
(4/5)
(6)
PCI1420PDV
NRND
LQFP
PDV
208
36
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
PCI1420PDV
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“PCI1420PDVG4”相匹配的价格&库存,您可以联系我们找货
免费人工找货