RC4560IDR

RC4560 www.ti.com ..................................................................................................................................................... SLOS457A – JANUARY 2005 – REVISED APRIL 2008 DUAL AUDIO OPERATIONAL AMPLIFIER FEATURES 1 • • • • Operating Voltage . . . ±2 V to ±18 V Low Noise Voltage . . . 1.2 µVrms (Typ) Wide GBW . . . 15 MHz (Typ) Low THD . . . 0.05% (Typ) • • Slew Rate . . . 5.5 V/µsec (Typ) Suitable for Applications Such as Audio Preamplifier, Active Filter, Headphone Amplifier, Industrial Measurement Equipment DESCRIPTION/ORDERING INFORMATION The RC4560 is a high-gain, wide-bandwidth, dual operational amplifier capable of driving 20 V peak-to-peak into 400-Ω loads. The RC4560 combines many of the features of the RC4558, but with wider bandwidth and higher slew rate, making this device ideal for active filters, data and telecommunications, and many instrumentation applications. ORDERING INFORMATION (1) PACKAGE (2) TA PDIP – P –40°C to 85°C SOIC – D TSSOP – PW (1) (2) ORDERABLE PART NUMBER Tube of 50 RC4560IP Tube of 75 RC4560ID Reel of 2500 RC4560IDR Tube of 150 RC4560IPW Reel of 2000 RC4560IPWR TOP-SIDE MARKING RC4560IP R4560I R4560I For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2005–2008, Texas Instruments Incorporated RC4560 SLOS457A – JANUARY 2005 – REVISED APRIL 2008 ..................................................................................................................................................... www.ti.com EQUIVALENT CIRCUIT VCC+ Output − Input + Input VCC− ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) VCC± Supply voltage ±18 V Input voltage (any input) ±15 V Output current ±50 mA D package θJA Package thermal impedance (2) (3) TJ Operating virtual junction temperature Tstg Storage temperature range (1) (2) (3) 2 97°C/W P package 85°C/W PW package 149°C/W 150°C −60°C to 125°C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can impact reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated Product Folder Link(s): RC4560 RC4560 www.ti.com ..................................................................................................................................................... SLOS457A – JANUARY 2005 – REVISED APRIL 2008 RECOMMENDED OPERATING CONDITIONS over operating free-air temperature range (unless otherwise noted) VCC+ VCC– Supply voltage MIN MAX 2 16 –2 –16 ±30 UNIT V VID Differential input voltage VICR Input common mode range –14 14 V V TA Operating free-air temperature range –40 85 °C TYP MAX ELECTRICAL CHARACTERISTICS VCC± = ±15 V, TA = 25°C (unless otherwise noted) PARAMETER VIO Input offset voltage IIO Input offset current IIB Input bias current AVD Large-signal differential voltage amplification ri Input resistance VO Output voltage swing VICR Common-mode input voltage range TEST CONDITIONS RS ≤ 10 kΩ RL ≥ 2 kΩ, VO = ±10 V CMRR Common-mode rejection ratio kSVR Supply-voltage rejection ratio (1) ICC Supply current (all amplifiers) (1) MIN 86 UNIT 0.5 6 mV 5 200 nA 40 500 nA 100 dB MΩ 0.3 5 RL ≥ 2 kΩ ±12 ±14 IO = 25 mA ±10 ±12.5 V ±12 ±14 V RS ≤ 10 kΩ 70 90 dB RS ≤ 10 kΩ 76.5 90 dB 4.3 5.7 mA Measured with VCC± differentially varied simultaneously from ±4 V to ±15 V OPERATING CHARACTERISTICS VCC± = ±15 V, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS TYP UNIT SR Slew rate at unity gain 5.5 V/µs GBW Gain bandwidth product 15 MHz THD Total harmonic distortion VO = 5 V, RL = 2 kΩ, f = 1 kHz, AVD = 20 dB 0.05 % Vn Equivalent input noise voltage RIAA, RS ≤ 2 kΩ, 30-kHz LPF 1.2 µVrms Submit Documentation Feedback Copyright © 2005–2008, Texas Instruments Incorporated Product Folder Link(s): RC4560 3 PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) RC4560ID ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 R4560I Samples RC4560IDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 R4560I Samples RC4560IP ACTIVE PDIP P 8 50 RoHS & Green NIPDAU N / A for Pkg Type -40 to 85 RC4560IP Samples RC4560IPW ACTIVE TSSOP PW 8 150 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 R4560I Samples RC4560IPWR ACTIVE TSSOP PW 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 R4560I Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of