REF3112AIDBZT

REF3112 REF3120 REF3125 REF3130 REF3133 REF3140 SBVS046C – DECEMBER 2003 – REVISED FEBRUARY 2006 15ppm/°C Max, 100µA, SOT23-3 SERIES VOLTAGE REFERENCE FEATURES q MicroSIZE PACKAGE: SOT23-3 q LOW DROPOUT: 5mV q HIGH OUTPUT CURRENT: ±10mA q HIGH ACCURACY: 0.2% max q LOW IQ: 115µA max q EXCELLENT SPECIFIED DRIFT PERFORMANCE: 15ppm/°C (max) from 0°C to +70°C 20ppm/°C (max) from –40°C to +125°C DESCRIPTION The REF31xx is a family of precision, low power, low dropout, series voltage references available in the tiny SOT23-3 package. The REF31xx’s small size and low power consumption (100µA typ) make it ideal for portable and battery-powered applications. The REF31xx does not require a load capacitor, but is stable with any capacitive load and can sink/source up to 10mA of output current. Unloaded, the REF31xx can be operated on supplies down to 5mV above the output voltage. All models are specified for the wide temperature range of –40°C to +125°C. APPLICATIONS q PORTABLE, BATTERY-POWERED EQUIPMENT q DATA ACQUISITION SYSTEMS q MEDICAL EQUIPMENT q HAND-HELD TEST EQUIPMENT PRODUCT REF3112 REF3120 REF3125 REF3130 REF3133 REF3140 IN 1 REF3112 REF3120 REF3125 REF3130 REF3133 REF3140 SOT23-3 VOLTAGE (V) 1.25 2.048 2.5 3.0 3.3 4.096 3 GND OUT 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2003-2006, Texas Instruments Incorporated www.ti.com ABSOLUTE MAXIMUM RATINGS(1) Supply Voltage, V+ to V– ................................................................... 7.0V Output Short-Circuit ................................................................. Continuous Operating Temperature .................................................. –55°C to +135°C Storage Temperature ..................................................... –65°C to +150°C Junction Temperature .................................................................... +150°C NOTES: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these, or any other conditions beyond those specified, is not implied. ELECTROSTATIC DISCHARGE SENSITIVITY This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PACKAGE/ORDERING INFORMATION(1) PACKAGE DESIGNATOR DBZ SPECIFIED TEMPERATURE RANGE –40°C to +125°C PACKAGE MARKING R31A ORDERING NUMBER REF3112AIDBZT REF3112AIDBZR REF3120AIDBZT REF3120AIDBZR REF3125AIDBZT REF3125AIDBZR REF3130AIDBZT REF3130AIDBZR REF3133AIDBZT REF3133AIDBZR REF3140AIDBZT REF3140AIDBZR TRANSPORT MEDIA, QUANTITY Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 PRODUCT REF3112 PACKAGE-LEAD SOT23-3 " REF3120 " SOT23-3 " DBZ " –40°C to +125°C " R31B " REF3125 " SOT23-3 " DBZ " –40°C to +125°C " R31C " REF3130 " SOT23-3 " DBZ " –40°C to +125°C " R31E " REF3133 " SOT23-3 " DBZ " –40°C to +125°C " R31F " REF3140 " SOT23-3 " DBZ " –40°C to +125°C " R31D " " " " " NOTE: (1) (1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. ELECTRICAL CHARACTERISTICS Boldface limits apply over the specified temperature range, TA = –40°C to +125°C. At TA = +25°C, ILOAD = 0mA, VIN = 5V, unless otherwise noted. REF31xx PARAMETER CONDITIONS MIN TYP MAX UNITS REF3112(1) - 1.25V OUTPUT VOLTAGE Initial Accuracy NOISE Output Voltage Noise Voltage Noise VOUT 1.2475 –0.2 f = 0.1Hz to 10Hz f = 10Hz to 10kHz 1.25 1.2525 0.2 V % µVPP µVrms 17 24 REF3120 – 2.048 OUTPUT VOLTAGE Initial Accuracy NOISE Output Voltage Noise Voltage Noise VOUT 2.0439 –0.2 f = 0.1Hz to 10Hz f = 10Hz to 10kHz 2.048 2.0521 0.2 V % µVPP µVrms 27 39 REF3125 – 2.5V OUTPUT VOLTAGE Initial Accuracy NOISE Output Voltage Noise Voltage Noise VOUT 2.4950 –0.2 f = 0.1Hz to 10Hz f = 10Hz to 10kHz 2.50 2.5050 0.2 V % µVPP µVrms 33 48 2 REF3112, 3120, 3125, 3130, 3133, 3140 www.ti.com SBVS046C ELECTRICAL CHARACTERISTICS Boldface limits apply over the specified temperature range, TA = –40°C to +125°C. At TA = +25°C, ILOAD = 0mA, VIN = +5V, unless otherwise noted. REF31xx PARAMETER CONDITIONS MIN TYP MAX UNITS REF3130 – 3.0V OUTPUT VOLTAGE Initial Accuracy NOISE Output Voltage Noise Voltage Noise VOUT 2.9940 –0.2 f = 0.1Hz to 10Hz f = 10Hz to 10kHz 3.0 3.0060 0.2 V % µVPP µVrms 39 57 REF3133 – 3.3V OUTPUT VOLTAGE Initial Accuracy NOISE Output Voltage Noise Voltage Noise VOUT 3.2934 –0.2 f = 0.1Hz to 10Hz f = 10Hz to 10kHz 3.30 3.3066 0.2 V % µVPP µVrms 43 63 REF3140 – 4.096V OUTPUT VOLTAGE Initial Accuracy NOISE Output Voltage Noise Voltage Noise VOUT 4.0878 –0.2 f = 0.1Hz to 10Hz f = 10Hz to 10kHz 4.096 4.1042 0.2 V % µVPP µVrms 53 78 REF3112, REF3120, REF3125, REF3130, REF3133, REF3140 OUTPUT VOLTAGE TEMP DRIFT(2) dVOUT/dT 0°C ≤ TA ≤ +70°C –40°C ≤ TA ≤ +125°C 0-1000h VREF + 0.05(1) ≤ VIN ≤ 5.5V dVOUT/dILOAD 0mA < ILOAD < 10mA, VIN = VREF + 250mV(1) –10mA < ILOAD < 0mA, VIN = VREF + 100mV(1) dT 100 25 VIN – VOUT ILOAD ISC 50 40 to 0.1% at VIN = +5V with CL = 0 IL = 0 VS IQ VREF + 0.05(1) 100 115 –40 –55 –65 5.5 115 135 +125 +135 +150 336 V µA µA °C °C °C °C/W 400 mA mA µs –10 5 50 10 ppm ppm mV mA 10 20 30 50 5 10 15 20 ppm/°C ppm/°C ppm ppm/V µV/mA µV/mA LONG-TERM STABILITY LINE REGULATION LOAD REGULATION(3) Sourcing Sinking THERMAL HYSTERESIS(4) First Cycle Additional Cycles DROPOUT VOLTAGE(1) OUTPUT CURRENT SHORT-CIRCUIT CURRENT Sourcing Sinking TURN-ON SETTLING TIME POWER SUPPLY Voltage Quiescent Current Over Temperature TEMPERATURE RANGE Specified Range Operating Range Storage Range Thermal Resistance SOT23-3 Surface-Mount NOTES: (1) (2) (3) (4) (5) 70 20 65 θJA Minimum supply voltage for REF3112 is 1.8V. Box Method used to determine temperature drift. Typical value of load regulation reflects measurements using force and sense contacts; see the Load Regulation section. Thermal hysteresis is explained in more detail in the Applications Information section of this data sheet. For IL > 0, see the Typical Characteristic curves. REF3112, 3120, 3125, 3130, 3133, 3140 SBVS046C 3 www.ti.com TYPICAL CHARACTERISTICS At TA = +25°C, VIN = +5V power supply, REF3125 is used for typical characteristics, unless otherwise noted. TEMPERATURE DRIFT (0°C to +70°C) 18 16 Percentage of Units TEMPERATURE DRIFT (–40°C to +125°C) 25 12 10 8 6 4 2 0 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 Drift (ppm/°C) Percentage of Units 14 20 15 10 5 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Drift (ppm/°C) OUTPUT VOLTAGE vs TEMPERATURE 0.16 0.14 DROPOUT VOLTAGE vs LOAD CURRENT 120 100 Dropout Voltage (mV) 0.12 Output Drift (%) 0.10 0.08 0.06 0.04 0.02 0 −0.02 −0.04 80 60 40 20 0 −60 −40 −20 0 20 40 60 80 100 120 140 –15 –10 –5 0 5 10 15 Temperature (°C) Load Current (mA) QUIESCENT CURRENT vs TEMPERATURE 120 100 Quiescent Current (µA) Output Resistance (Ω) OUTPUT IMPEDANCE vs FREQUENCY 100 10 80 60 40 20 0 –60 –40 –20 0 20 40 60 80 100 120 140 Temperature (°C) 1 0.1 0.01 1 10 100 1k Frequency (Hz) 10k 100k 1M 4 REF3112, 3120, 3125, 3130, 3133, 3140 www.ti.com SBVS046C TYPICAL CHARACTERISTICS (Cont.) At TA = +25°C, VIN = +5V power supply, REF3125 is used for typical characteristics, unless otherwise noted. PSRR vs FREQUENCY 90 OUTPUT vs SUPPLY 2.505 2.504 2.503 +125°C Power-Supply Rejection Ratio (dB) 80 70 Output (V) 60 50 40 30 20 10 0 1 10 100 1k 10k 100k Frequency (Hz) 2.502 2.501 2.500 2.499 2.498 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Supply (V) +25°C −40°C OUTPUT VOLTAGE vs LOAD CURRENT 2.505 2.504 Output Voltage (V) 2.503 2.502 2.501 2.500 2.499 2.498 2.497 –15 –10 –5 0 5 10 15 +25°C −40°C 1V/div STEP RESPONSE, CL = 0, 5V STARTUP +125°C 5V/div VIN VOUT 100µs/div Load Current (mA) 0.1Hz TO 10Hz NOISE 20 0 –20 Drift (ppm) 10µV/div –40 –60 –80 –100 –120 400ms/div 0 REF3112 LONG TERM STABILITY 100 200 300 400 500 600 700 800 900 1000 Time (Hrs) REF3112, 3120, 3125, 3130, 3133, 3140 SBVS046C 5 www.ti.com TYPICAL CHARACTERISTICS (Cont.) At TA = +25°C, VIN = +5V power supply, REF3125 is used for typical characteristics, unless otherwise noted. LINE TRANSIENT CL = 0pF 500mV/div 500mV/div LINE TRANSIENT CL = 10µF VIN VIN 20mV/div VOUT 20mV/div 20µs/div VOUT 100µs/div LOAD TRANSIENT CL = 0pF, ±10mA OUTPUT PULSE ILOAD +10mA –10mA 200mV/div VOUT +10mA ILOAD LOAD TRANSIENT CL = 1µF, ±10mA OUTPUT PULSE +10mA –10mA +10mA 50mV/div VOUT 40µs/div 40µs/div LOAD TRANSIENT CL = 0pF, ±1mA OUTPUT PULSE VIN +1mA –1mA VOUT 100mV/div LOAD TRANSIENT CL = 1µF, ±1mA OUTPUT PULSE VIN +1mA –1mA 20mV/div +1mA +1mA VOUT 40µs/div 40µs/div 6 REF3112, 3120, 3125, 3130, 3133, 3140 www.ti.com SBVS046C THEORY OF OPERATION The REF31xx is a family of series, CMOS, precision bandgap voltage references. The basic bandgap topology is shown in Figure 1. Transistors Q1 and Q2 are biased such that the current density of Q1 is greater than that of Q2. The difference of the two base-emitter voltages, Vbe1 – Vbe2, has a positive temperature coefficient and is forced across resistor R1. This voltage is gained up and added to the base-emitter voltage of Q2, which has a negative temperature coefficient. The resulting output voltage is virtually independent of temperature. 100µA, and the maximum quiescent current over temperature is just 135µA. The quiescent current typically changes less than 2µA over the entire supply range, as shown in Figure 3. QUIESCENT CURRENT vs POWER SUPPLY 100.5 Quiescent Current (µA) 100.0 99.5 99.0 98.5 VBANDGAP R1 98.0 1.5 2.5 3.5 Power Supply (V) 4.5 5.5 + + Vbe1 Vbe2 – – Q1 I N Q2 FIGURE 3. Supply Current vs Supply Voltage. Supply voltages below the specified levels can cause the REF31xx to momentarily draw currents greater than the typical quiescent current. This can be prevented by using a power supply with a fast rising edge and low output impedance. FIGURE 1. Simplified Schematic of Bandgap Reference. APPLICATION INFORMATION The REF31xx does not require a load capacitor and is stable with any capacitive load. Figure 2 shows typical connections required for operation of the REF31xx. A supply bypass capacitor of 0.47µF is recommended. THERMAL HYSTERESIS Thermal hysteresis for the REF31xx is defined as the change in output voltage after operating the device at 25°C, cycling the device through the specified temperature range, and returning to 25°C. It can be expressed as:  abs VPRE – VPOST  6 VHYST =   • 10 (ppm) VNOM   VIN 1 0.47µF REF31xx 3 Where: VHYST = Thermal hysteresis VPRE = Output voltage measured at 25°C pretemperature cycling VPOST = Output voltage measured after the device has been cycled through the specified temperature range of –40°C to +125°C and returned to 25°C. VOUT 2 FIGURE 2. Typical Connections for Operating REF31xx. TEMPERATURE DRIFT The REF31xx is designed to exhibit minimal drift error, defined as the change in output voltage over varying temperature. The drift is calculated using the “box” method which is described by the following equation: SUPPLY VOLTAGE The REF31xx family of references features an extremely low dropout voltage. With the exception of the REF3112, which has a minimum supply requirement of 1.8V, these references can be operated with a supply of only 5mV above the output voltage in an unloaded condition. For loaded conditions, a typical dropout voltage versus load is shown in the typical curves. The REF31xx features a low quiescent current, which is extremely stable over changes in both temperature and supply. The typical room temperature quiescent current is   VOUTMAX – VOUTMIN • 10 6 ppm V • TemperatureRange   OUT  The REF31xx features a typical drift coefficient of 5ppm from 0°C to 70°C—the primary temperature range for many applications. For the industrial temperature range of –40°C to 125°C, the REF31xx family drift increases to a typical value of 10ppm. REF3112, 3120, 3125, 3130, 3133, 3140 SBVS046C 7 www.ti.com NOISE PERFORMANCE Typical 0.1Hz to 10Hz voltage noise can be seen in the Typical Characteristic Curve, 0.1 to 10Hz Voltage Noise. The noise voltage of the REF31xx increases with output voltage and operating temperature. Additional filtering may be used to improve output noise levels, although care should be taken to ensure the output impedance does not degrade the AC performance. LONG-TERM STABILITY Long-term stability refers to the change of the output voltage of a reference over a period of months or years. This effect lessens as time progresses, as is shown by the long-term stability curves. The typical drift value for the REF31xx is 70ppm from 0-1000 hours. This parameter is characterized by measuring 30 units at regular intervals for a period of 1000 hours. LOAD REGULATION Load regulation is defined as the change in output voltage due to changes in load current. The load regulation of the REF31xx is measured using force and sense contacts as pictured in Figure 4. The force and sense lines reduce the impact of contact and trace resistance, resulting in accurate measurement of the load regulation contributed solely by the REF31xx. For applications requiring improved load regulation, force and sense lines should be used. APPLICATION CIRCUITS Negative Reference Voltage For applications requiring a negative and positive reference voltage, the REF31xx and OPA703 can be used to provide a dual supply reference from a ±5V supply. Figure 5 shows the REF3125 used to provide a ±2.5V supply reference voltage. The low drift performance of the REF31xx complement the low offset voltage and low drift of the OPA703 to provide an accurate solution for split-supply applications. +5V REF3125 10kΩ +2.5V 10kΩ +5V OPA703 –2.5V –5V FIGURE 5. REF3125 Combined with OPA703 to Create Positive and Negative Reference Voltages. Output Pin Contact and Trace Resistance + VOUT – Sense Line Force Line IL Load Meter DATA ACQUISITION Data acquisition systems often require stable voltage references to maintain accuracy. The REF31xx family features stability and a wide range of voltages suitable for most microcontrollers and data converters. Figure 6, Figure 7, and Figure 8 show basic data acquisition systems. FIGURE 4. Accurate Load Regulation of REF31xx. 8 REF3112, 3120, 3125, 3130, 3133, 3140 www.ti.com SBVS046C 3.3V 5Ω REF3133 V+ + 1µF to 10µF ADS7822 VREF 0.1µF VIN +In –In GND CS DOUT DCLOCK VCC + VS GND 1µF to 10µF Microcontroller FIGURE 6. Basic Data Acquisition System 1. 2.5V Supply 2.5V VIN ADS8324 REF3112 VOUT = 1.25V 0.1µF GND 0V to 1.25V +In –In GND CS DOUT DCLOCK VREF VCC + 5Ω + VS 1µF to 10µF 1µF to 10µF Microcontroller FIGURE 7. Basic Data Acquisition System 2. 5V REF3140 0.1µF VOUT = 4.096V 1kΩ +5V 1kΩ VIN THS4031 6800pF 0.22µF 500Ω –5V 10Ω 10Ω 22µF VREF ADS8381 1µF FIGURE 8. REF3140 Provides an Accurate Reference for Driving the ADS8381. REF3112, 3120, 3125, 3130, 3133, 3140 SBVS046C 9 www.ti.com PACKAGE OPTION ADDENDUM www.ti.com 11-Dec-2006 PACKAGING INFORMATION Orderable Device REF3112AIDBZR REF3112AIDBZRG4 REF3112AIDBZT REF3112AIDBZTG4 REF3120AIDBZR REF3120AIDBZRG4 REF3120AIDBZT REF3120AIDBZTG4 REF3125AIDBZR REF3125AIDBZRG4 REF3125AIDBZT REF3125AIDBZTG4 REF3130AIDBZR REF3130AIDBZRG4 REF3130AIDBZT REF3130AIDBZTG4 REF3133AIDBZR REF3133AIDBZRG4 REF3133AIDBZT REF3133AIDBZTG4 REF3140AIDBZR REF3140AIDBZRG4 REF3140AIDBZT REF3140AIDBZTG4 (1) Status (1) ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE Package Type SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 Package Drawing DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ DBZ Pins Package Eco Plan (2) Qty 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3000 Green (RoHS & no Sb/Br) 3000 Green (RoHS & no Sb/Br) 250 250 Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Lead/Ball Finish CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU MSL Peak Temp (3) Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM 3000 Green (RoHS & no Sb/Br) 3000 Green (RoHS & no Sb/Br) 250 250 Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) 3000 Green (RoHS & no Sb/Br) 3000 Green (RoHS & no Sb/Br) 250 250 Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) 3000 Green (RoHS & no Sb/Br) 3000 Green (RoHS & no Sb/Br) 250 250 Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) 3000 Green (RoHS & no Sb/Br) 3000 Green (RoHS & no Sb/Br) 250 250 Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) 3000 Green (RoHS & no Sb/Br) 3000 Green (RoHS & no Sb/Br) 250 250 Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) The marketing status values are defined as follows: Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 11-Dec-2006 ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright  2006, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Low Power Wireless www.ti.com/lpw