RI-ANT-T01A-00

RADIO FREQUENCY IDENTIFICATION SYSTEMS Data Sheet HF Reader System Series 6000 Gate Antenna This Antenna with pre-set antenna matchingwith electronics This antenna isis aasingle-loop single-loopantenna transmit/receive preset matching electronics for a transmitter frequency of 13.56MHz and impedance of 50Ω. Specifications: Part number RI-ANT-T01A Operating Frequency 13.56MHz Impedance 50 Ohm ± 10 Ohm ∠ 0° ± 13° Maximum RF power 8W Operating Temperature -25°C to +55°C Storage Temperature -25°C to +60°C Case Material Plastic ABS, black Protection Class IP65 Vibration According to IEC-68-2-6 (10Hz to 150Hz: 0.15mm/2g) Shock According to IEC-68-2-27 (acceleration: 30g) Dimensions (L x W x H) 337mm x 322mm x 38mm 337mm x 322mm x 40mm (incl. screw heads) Weight 700g Connector SMA male (50 Ohm) Cable Type: RG58; Length: 3.6m ± 0.1m 337±2 38±0,5 322±2 Readout Pattern Tag orientation 1 Tag orientation 2 0, 2 TAG 1 5, 6± 267±1 322±2 13 0,0 -1,0 28±0,5 TAG 40+0,5 -1,0 2 267±1 For more information, contact the sales office or distributor nearest you. This contact information can be found on our web site at: http://www.ti-rfid.com Texas Instruments reserves the right to change its products and services at any time without notice. TI provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of customers products. Therefore, TI assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance provided by TI. © Copyright 2001 Texas Instruments Incorporated. 11-08-22-005 08/01