SN65EL11
www.ti.com............................................................................................................................................................................................ SLLS920 – DECEMBER 2008
5-V PECL/ECL 1:2 Fanout Buffer
FEATURES
1
•
•
•
•
•
•
•
•
•
1:2 PECL/ECL Fanout Buffer
Operating Range
– PECL: VCC = 4.2 V to 5.7 V With VEE = 0 V
– NECL: VCC = 0 V With VEE = –4.2 V to –5.7 V
5-ps Skew Between Outputs
Support for Clock Frequencies >2.5 GHz
265-ps Typical Propagation Delay
Deterministic Output Value for Open Input
Conditions
Drop-In Compatible With MC10EL11,
MC100EL11
Built-In Input Pulldown Resistors
Built-In Temperature Compensation
PINOUT ASSIGNMENT
D-8, DGK-8 Package
(Top View)
Q0
1
8
VCC
Q0
2
7
D
Q1
3
6
D
Q1
4
5
VEE
APPLICATIONS
•
•
Data and Clock Transmission Over Backplane
Signaling Level Conversion
P0065-02
DESCRIPTION
The SN65EL11 is a differential 1:2 PECL/ECL fanout
buffer. The device includes circuitry to maintain a
known logic level when inputs are in an open
condition. The SN65EL11 is housed in an
industry-standard SOIC-8 package and is also
available in a TSSOP-8 package.
Table 1. Pin Description
PIN
FUNCTION
D, D
PECL/ECL data inputs
Q0, Q0, Q1, Q1
PECL/ECL outputs
Vcc
Positive supply
VEE
Negative supply
ORDERING INFORMATION (1)
(1)
PART NUMBER
PART MARKING
PACKAGE
LEAD FINISH
SN65EL11D
SN65EL11
SOIC
NiPdAu
SN65EL11DGK
SN65EL11
SOIC-TSSOP
NiPdAu
Leaded device options not initially available; contact a sales representative for further details.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008, Texas Instruments Incorporated
SN65EL11
SLLS920 – DECEMBER 2008............................................................................................................................................................................................ www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS (1)
VALUE
UNIT
Absolute PECL-mode supply voltage, VCC
PARAMETER
VEE = 0 V
CONDITIONS
6
V
Absolute NECL-mode supply voltage, VEE
VCC = 0 V
–6
V
PECL-mode input voltage
VEE = 0 V; VI ≤ VCC
6
V
NECL-mode input voltage
VCC = 0 V; VI ≥ VEE
–6
V
Continuous
50
mA
Output current
100
mA
Operating temperature range
–40 to 85
°C
Storage temperature range
–65 to 150
°C
(1)
Surge
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
POWER DISSIPATION RATINGS
PACKAGE
CIRCUIT BOARD
MODEL
POWER RATING
TA < 25°C (mW)
THERMAL RESISTANCE,
JUNCTION-TO-AMBIENT,
NO AIRFLOW
DERATING FACTOR
TA > 25°C
(mW/°C)
POWER RATING
TA = 85°C
(mW)
SOIC
SOIC-TSSOP
Low-K
719
139
7
288
High-K
840
119
8
336
Low-K
469
213
5
188
High-K
527
189
5
211
THERMAL CHARACTERISTICS
PARAMETER
θJB
Junction-to-board thermal resistance
θJC
Junction-to-case thermal resistance
PACKAGE
VALUE
SOIC
79
SOIC-TSSOP
120
SOIC
98
SOIC-TSSOP
74
UNIT
°C/W
°C/W
KEY ATTRIBUTES
CHARACTERISTICS
VALUE
Internal input pulldown resistor
75 kΩ
Moisture sensitivity level
Level 1
Flammability rating (oxygen index: 28 to 34)
UL 94 V-0 at 0.125 in
ESD-HBM
4 kV
ESD-machine model
200 V
Meets or exceeds JEDEC Spec EIA/JESD78 latchup test
2
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): SN65EL11
SN65EL11
www.ti.com............................................................................................................................................................................................ SLLS920 – DECEMBER 2008
PECL DC CHARACTERISTICS (1) (VCC = 5 V; VEE = 0 V) (2)
–40°C
PARAMETER
MIN
ICC
Power-supply current
VOH
Output HIGH voltage (3)
(3)
TYP
18
25°C
MAX
MIN
TYP
26
85°C
MAX
MIN
TYP
23
MAX
UNIT
21
26
26
mA
3915
4120
3915
4000
4120
3915
4120
mV
3288
VOL
Output LOW voltage
3170
3380
3170
3380
3170
3380
mV
VIH
Input HIGH voltage (single-ended)
3835
4120
3835
4120
3835
4120
mV
VIL
Input LOW voltage (single-ended)
3190
3525
3190
3525
3190
3525
mV
VIHCMR
Input HIGH voltage, common-mode
range (differential) (4)
2.5
4.6
2.5
4.6
2.5
4.6
V
IIH
Input HIGH current
150
µA
IIL
Input LOW current
(1)
(2)
(3)
(4)
150
150
0.5
0.5
µA
0.5
The device meets these specifications after thermal equilibrium has been established when mounted in a test socket or printed-circuit
board with maintained transverse airflow greater than 500 lfpm (2.54 m/s). Electrical parameters are assured only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
Input and output parameters vary 1:1 with VCC. VEE can vary +0.25 V / –0.5 V.
Outputs are terminated through a 50-Ω resistor to VCC – 2 V.
VIHCMR min varies 1:1 with VEE; VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the more-positive side of the
differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies
between VPP min and 1 V.
NECL DC CHARACTERISTICS (1) (VCC = 0 V; VEE = 5 V) (2)
PARAMETER
–40°C
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
UNIT
Power-supply current
21
26
26
mA
Output HIGH voltage (3)
–1085
–880
–1025
–995
–880
–1025
–880
mV
VOL
Output LOW voltage (3)
–1830
–1620
–1810
–1712
–1620
–1810
–1620
mV
VIH
Input HIGH voltage (single-ended)
–1165
–880
–1165
–880
–1165
–880
mV
VIL
Input LOW voltage (single-ended)
–1810
–1475
–1810
–1475
–1810
–1475
mV
VIHCMR
Input HIGH voltage, common-mode
range (differential) (4)
–2.5
–0.4
–2.5
–0.4
–2.5
–0.4
V
IIH
Input HIGH current
150
µA
IIL
Input LOW current
150
0.5
23
MAX
VOH
(2)
(3)
(4)
26
85°C
IEE
(1)
19
25°C
150
0.5
0.5
µA
The device meets these specifications after thermal equilibrium has been established when mounted in a test socket or printed-circuit
board with maintained transverse airflow greater than 500 lfpm (2.54 m/s). Electrical parameters are assured only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
Input and output parameters vary 1:1 with VCC. VEE can vary +0.25 V / –0.5 V.
Outputs are terminated through a 50-Ω resistor to VCC – 2 V.
VIHCMR min varies 1:1 with VEE; VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the more-positive side of the
differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies
between VPP min and 1 V.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): SN65EL11
3
SN65EL11
SLLS920 – DECEMBER 2008............................................................................................................................................................................................ www.ti.com
AC CHARACTERISTICS (1) (VCC = 5 V; VEE = 0 V or VCC = 0 V; VEE = –5 V) (2)
PARAMETER
–40°C
MIN
fMAX
Maximum switching frequency (3) (see Figure 6)
tPLH/tPHL
Propagation delay to output (see Figure 2)
tSKEW
tJITTER
Device skew
(4)
Random clock jitter (RMS)
Q-output rise/fall times (20%–80%) (see Figure 4)
(see Figure 3)
TYP MAX
MIN
TYP MAX
3.1
200
300
200
15
7
15
7
15
5
15
5
15
5
15
0.2
UNIT
GHz
300
7
0.2
Input swing
85°C
3.4
300
(see Figure 5)
tr/tf
(2)
(3)
(4)
(5)
(6)
MIN
3.5
200
VPP
(1)
TYP MAX
Duty cycle skew (5)
(6)
25°C
0.2
ps
ps
ps
150
1000
150
1000
150
1000
mV
150
250
150
250
150
250
ps
The device meets these specifications after thermal equilibrium has been established when mounted in a test socket or printed-circuit
board with maintained transverse airflow greater than 500 lfpm (2.54 m/s). Electrical parameters are assured only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
Input and output parameters vary 1:1 with VCC. VEE can vary +0.25 V / –0.5 V.
Maximum switching frequency is measured at an output amplitude of 300 mVpp.
Within-device skew defined as identical transitions on similar paths through a device.
Duty cycle skew is the difference between a tPLH and tPHL propagation delay through a device.
VPP(min) is the minimum input swing for which ac parameters are assured.
Typical Termination for Output Driver
ZO = 50 W
P
P
Driver
Receiver
ZO = 50 W
N
N
50 W
50 W
VTT
VTT = VCC – 2 V
S0078-02
Figure 1. Typical Termination for Output Driver
D
D
Q
Q
tPLH
tPHL
T0400-01
Figure 2. Propagation Delay
4
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): SN65EL11
SN65EL11
www.ti.com............................................................................................................................................................................................ SLLS920 – DECEMBER 2008
D
VPP(max)
VPP(min)
D
T0401-01
Figure 3. Input Voltage Swing
80%
20%
tr
tf
T0402-01
Figure 4. Output Rise and Fall Times
D
D
Q0
Q0
tPLH0
tPHL0
Q1
Q1
tPLH1
tPHL1
Device Skew = [(tPLH1 – tPLH0), (tPHL1 – tPHL0)]
T0403-01
Figure 5. Device Skew
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): SN65EL11
5
SN65EL11
SLLS920 – DECEMBER 2008............................................................................................................................................................................................ www.ti.com
OUTPUT AMPLITUDE
vs
FREQUENCY
1000
VCC = 5 V
VEE = 0 V
900
Output Amplitude − mV
800
700
600
TA = −40°C
500
400
300
TA = 85°C
200
100
TA = 25°C
0
0
500
1000
1500
2000
2500
3000
3500
4000
4500
f − Frequency − MHz
G001
Figure 6.
6
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): SN65EL11
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
SN65EL11D
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
EL11
SN65EL11DGK
ACTIVE
VSSOP
DGK
8
80
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
SILI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“SN65EL11D”相匹配的价格&库存,您可以联系我们找货
免费人工找货