SN65LVDS105PWR

Product Folder Sample & Buy Technical Documents Support & Community Tools & Software SN65LVDS104, SN65LVDS105 SLLS396G – SEPTEMBER 1999 – REVISED DECEMBER 2015 SN65LVDS10x 4-Port LVDS and 4-Port TTL-to-LVDS Repeaters 1 Features 3 Description • The SN65LVDS10x are a differential line receiver and a LVTTL input (respectively) connected to four differential line drivers that implement the electrical characteristics of low-voltage differential signaling (LVDS). LVDS, as specified in EIA/TIA-644 is a data signaling technique that offers low-power, low-noise coupling, and switching speeds to transmit data at relatively long distances. (Note: The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other system characteristics.) 1 • • • • • • • • • Receiver and Drivers Meet or Exceed the Requirements of ANSI EIA/TIA-644 Standard – SN65LVDS105 Receives Low-Voltage TTL (LVTTL) Levels – SN65LVDS104 Receives Differential Input Levels, ±100 mV Typical Data Signaling Rates to 400 Mbps or Clock Frequencies to 400 MHz Operates From a Single 3.3-V Supply Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and a 100-Ω Load Propagation Delay Time – SN65LVDS105 – 2.2 ns (Typ) – SN65LVDS104 – 3.1 ns (Typ) LVTTL Levels Are 5-V Tolerant Electrically Compatible With LVDS, PECL, LVPECL, LVTTL, LVCMOS, GTL, BTL, CTT, SSTL, or HSTL Outputs With External Networks Driver Outputs Are High-Impedance When Disabled or With VCC