SN7405NE4









    
    
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 D Package Options Include Plastic D Dependable Texas Instrument Quality and Reliability 1A 1Y 2A 2Y 3A 3Y GND 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 6A 6Y 5A 5Y 4A 4Y 1A 2Y 2A 1 14 2 13 3 12 VCC 3A 3Y 4A 4 11 5 10 6 9 7 8 1Y 6A 6Y GND 5Y 5A 4Y SN54LS05, SN54S05 . . . FK PACKAGE (TOP VIEW) 1Y 1A NC VCC 6A SN5405, SN54LS05, SN54S05 . . . J PACKAGE SN7405 . . . N PACKAGE SN74LS05 . . . D, DB, N, OR NS PACKAGE SN74S05 . . . D, N, OR NS PACKAGE SN54LS05, SN54S05 . . . W PACKAGE (TOP VIEW) (TOP VIEW) 2A NC 2Y NC 3A 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 6Y NC 5A NC 5Y 3Y GND NC 4Y 4A Small-Outline (D, NS), Shrink Small-Outline (DB), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) DIPs NC − No internal connection description/ordering information These devices contain six independent inverters. To perform correctly, the open-collector outputs require pullup resistors. These devices may be connected to other open-collector outputs to implement active-low wired-OR or active-high wire-AND functions. Open-collector devices often are used to generate high VOH levels. ORDERING INFORMATION PDIP − N 0°C to 70°C −55°C to 125°C ORDERABLE PART NUMBER PACKAGE† TA SOIC − D Tube SN7405N SN74LS05N SN74LS05N SN74S05N SN74S05N SN74LS05D Tape and reel SN74LS05DR Tube SN74S05D Tape and reel SN74S05DR Tape and reel SSOP − DB Tape and reel CDIP − J Tube CDIP − W Tube LCCC − FK SN7405N Tube SOP − NS Tube TOP-SIDE MARKING LS05 S05 SN74LS05NSR 74LS05 SN74S05NSR 74S05 SN74LS05DBR LS05 SNJ54LS05J SNJ54LS05J SNJ54S05J SNJ54S05J SNJ54LS05W SNJ54LS05W SNJ54S05W SNJ54S05W SNJ54LS05FK SNJ54LS05FK SNJ54S05FK SNJ54S05FK † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2003, Texas Instruments Incorporated    ! "#$ !  %#&'" ($) (#"! "  !%$""! %$ *$ $!  $+! !#$! !(( ,-) (#" %"$!!. ($!  $"$!!'- "'#($ $!.  '' %$$!)  %(#"! "%'  /0121 '' %$$! $ $!$( #'$!! *$,!$ $()  '' *$ %(#"! %(#" %"$!!. ($!  $"$!!'- "'#($ $!.  '' %$$!) POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 








    
    
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 FUNCTION TABLE (each inverter) INPUT A OUTPUT Y H L L H logic diagram (positive logic) 1A 1 2 1Y 2A 3 4 2Y 3A 5 6 3Y 4A 9 8 4Y 5A 11 10 5Y 6A 13 12 6Y Y=A Pin numbers shown are for the D, DB, J, N, and NS packages. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 








    
    
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 schematic (each inverter) ’05 ’LS05 VCC 4 kΩ VCC 1.6 kΩ 8 kΩ 20 kΩ Input A Input A Output Y 1 kΩ Output Y 4.5 kΩ GND GND ’S05 VCC 2.8 kΩ 900 Ω Input A Output Y 250 Ω 500 Ω Resistor values shown are nominal. absolute maximum ratings over operating free-air temperature (unless otherwise noted)† Supply voltage, VCC (see Note 1): ’05, ’LS05, ’S05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI: ’05, ’S05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V ’LS05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Off-state output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Voltage values are with respect to network ground terminal. 2. The package thermal impedance is calculated in accordance with JESD 51-7. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 








    
    
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 recommended operating conditions SN5405 SN7405 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 UNIT VCC VIH Supply voltage VIL VOH Low-level input voltage 0.8 0.8 High-level output voltage 5.5 5.5 V IOL TA Low-level output current 16 16 mA 70 °C High-level input voltage 2 Operating free-air temperature 2 −55 125 V V 0 V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TEST CONDITIONS† PARAMETER VIK VCC = MIN, MIN SN5405 TYP‡ MAX II = −12 mA IOH VCC = MIN, VOH = 5.5 V VOL II VCC = MIN, VCC = MAX, VIH = 2 V, VI = 5.5 V IIH IIL VCC = MAX, VCC = MAX, VI = 2.4 V VI = 0.4 V ICCH ICCL VCC = MAX, VCC = MAX, VI = 0 V VI = 4.5 V MIN SN7405 TYP‡ −1.5 VIL = 0.8 V VIL = 0.7 V MAX −1.5 UNIT V 0.25 mA 0.25 IOL = 16 mA 0.2 0.4 0.2 0.4 V 1 1 mA 40 40 µA −1.6 −1.6 mA 6 12 mA 18 33 18 † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. ‡ All typical values are at VCC = 5 V, TA = 25°C. 33 mA 6 12 switching characteristics, VCC = 5 V, TA = 25°C (see Figure 1) PARAMETER tPLH tPHL 4 FROM (INPUT) TO (OUTPUT) A Y POST OFFICE BOX 655303 TEST CONDITIONS RL = 4 kΩ RL = 400 Ω • DALLAS, TEXAS 75265 CL = 15 pF MIN TYP MAX 40 55 8 15 UNIT ns 








    
    
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 recommended operating conditions SN54LS05 SN74LS05 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 UNIT VCC VIH Supply voltage VIL VOH Low-level input voltage 0.7 0.8 High-level output voltage 5.5 5.5 IOL TA Low-level output current 4 8 mA 70 °C High-level input voltage 2 Operating free-air temperature 2 −55 125 V V 0 V V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) SN54LS05 TYP‡ MAX TEST CONDITIONS† PARAMETER VIK IOH VCC = MIN, VCC = MIN, II = −18 mA VIL = MAX, VOL VCC = MIN, VIH = 2 V II IIH VCC = MAX, VCC = MAX, VI = 7 V VI = 2.7 V IIL ICCH VCC = MAX, VCC = MAX, VI = 0.4 V VI = 0 V MIN VOH = 5.5 V IOL = 4 mA SN74LS05 TYP‡ MAX MIN UNIT −1.5 −1.5 V 0.1 0.1 mA 0.25 0.4 IOL = 8 mA 0.25 0.4 0.35 0.5 V 0.1 0.1 mA 20 20 µA −0.4 −0.4 mA 1.2 2.4 mA ICCL VCC = MAX, VI = 4.5 V 3.6 6.6 3.6 † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. ‡ All typical values are at VCC = 5 V, TA = 25°C. 6.6 mA 1.2 2.4 switching characteristics, VCC = 5 V, TA = 25°C (see Figure 2) PARAMETER FROM (INPUT) TO (OUTPUT) tPLH tPHL A Y POST OFFICE BOX 655303 TEST CONDITIONS RL = 2 kΩ, CL = 15 pF • DALLAS, TEXAS 75265 MIN TYP MAX 17 32 15 28 UNIT ns 5 








    
    
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 recommended operating conditions SN54S05 SN74S05 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 UNIT VCC VIH Supply voltage VIL VOH Low-level input voltage 0.8 0.8 High-level output voltage 5.5 5.5 V IOL TA Low-level output current 20 20 mA 70 °C High-level input voltage 2 Operating free-air temperature 2 −55 125 V V 0 V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TEST CONDITIONS† PARAMETER VIK VCC = MIN, MIN SN54S05 TYP‡ MAX II = −18 mA IOH VCC = MIN, VOH = 5.5 V VOL II VCC = MIN, VCC = MAX, VIH = 2 V, VI = 5.5 V IIH IIL VCC = MAX, VCC = MAX, VI = 2.7 V VI = 0.5 V ICCH ICCL VCC = MAX, VCC = MAX, VI = 0 V VI = 4.5 V MIN SN74S05 TYP‡ MAX −1.2 VIL = 0.8 V VIL = 0.7 V −1.2 UNIT V 0.25 mA 0.25 IOL = 20 mA 0.5 0.5 1 1 mA 50 50 µA −2 V −2 mA 9 19.8 mA 30 54 30 † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. ‡ All typical values are at VCC = 5 V, TA = 25°C. 54 mA 9 19.8 switching characteristics, VCC = 5 V, TA = 25°C (see Figure 1) PARAMETER tPLH tPHL tPLH tPHL 6 FROM (INPUT) TO (OUTPUT) TEST CONDITIONS CL = 15 pF A Y RL = 280 Ω • DALLAS, TEXAS 75265 TYP MAX 2 5 7.5 2 4.5 7 UNIT ns 7.5 CL = 50 pF POST OFFICE BOX 655303 MIN 7 ns 








    
    
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 PARAMETER MEASUREMENT INFORMATION SERIES 54/74 AND 54S/74S DEVICES VCC RL From Output Under Test Test Point CL (see Note A) LOAD CIRCUIT 3V 1.5 V Input 1.5 V 0V tPLH High-Level Pulse 1.5 V VOH In-Phase Output 1.5 V 1.5 V 1.5 V VOL tPHL tw Low-Level Pulse tPHL 1.5 V 1.5 V tPLH VOH Out-of-Phase Output 1.5 V 1.5 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VOLTAGE WAVEFORMS PULSE WIDTHS NOTES: A. CL includes probe and jig capacitance. B. In the examples above, the phase relationships between inputs and outputs have been chosen arbitrarily. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, and: For Series 54/74, tr ≤ 7 ns, tf ≤ 7 ns. For Series 54S/74S, tr ≤ 2.5 ns, tf ≤ 2.5 ns. D. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 








    
    
The SN5405 is obsolete and no longer is supplied. SDLS030A − DECEMBER 1983 − REVISED NOVEMBER 2003 PARAMETER MEASUREMENT INFORMATION SERIES 54LS/74LS DEVICES VCC RL From Output Under Test Test Point CL (see Note A) LOAD CIRCUIT 3V 1.3 V Input 1.3 V 0V tPLH High-Level Pulse 1.3 V 1.3 V 1.3 V 1.3 V tPLH VOH Out-of-Phase Output 1.3 V 1.3 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES CL includes probe and jig capacitance. In the examples above, the phase relationships between inputs and outputs have been chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 1.5 ns, tf ≤ 2.6 ns. The outputs are measured one at a time with one input transition per measurement. Figure 2. Load Circuit and Voltage Waveforms 8 1.3 V VOL tPHL VOLTAGE WAVEFORMS PULSE WIDTHS NOTES: A. B. C. D. VOH In-Phase Output 1.3 V tw Low-Level Pulse tPHL POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 2-Dec-2023 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) JM38510/07004BCA ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 07004BCA Samples M38510/07004BCA ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 07004BCA Samples SN54LS05J ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SN54LS05J Samples SN54S05J ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SN54S05J Samples SN7405N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN7405N Samples SN7405NE4 ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN7405N Samples SN74LS05D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LS05 Samples SN74LS05DBR ACTIVE SSOP DB 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LS05 Samples SN74LS05DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LS05 Samples SN74LS05N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74LS05N Samples SN74LS05NE4 ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74LS05N Samples SN74LS05NSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 74LS05 Samples SN74S05D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 S05 Samples SN74S05N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74S05N Samples SN74S05NSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 74S05 Samples SNJ54LS05FK ACTIVE LCCC FK 20 55 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SNJ54LS 05FK Samples SNJ54LS05J ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SNJ54LS05J Samples SNJ54LS05W ACTIVE CFP W 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SNJ54LS05W Samples Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 2-Dec-2023 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) SNJ54S05FK ACTIVE LCCC FK 20 55 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SNJ54S 05FK Samples SNJ54S05J ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SNJ54S05J Samples SNJ54S05W ACTIVE CFP W 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SNJ54S05W Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of