SN74AC11IPWRG4Q1

SN74AC11-Q1 TRIPLE 3-INPUT POSITIVE-AND GATE SCLS523A − AUGUST 2003 − REVISED APRIL 2008 D Qualified for Automotive Applications D ESD Protection Exceeds 2000 V Per D D D D PACKAGE (TOP VIEW) MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) 2-V to 6-V VCC Operation Inputs Accept Voltages to 6 V Max tpd of 7.5 ns at 5 V 1A 1B 2A 2B 2C 2Y GND description/ordering information 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 1C 1Y 3A 3B 3C 3Y The ’AC11 device contains three independent 3-input AND gates. This device performs the Boolean function Y = A • B • C or Y = A + B + C in positive logic. ORDERING INFORMATION{ −40°C 40°C to 85°C ORDERABLE PART NUMBER PACKAGE† TA TOP-SIDE MARKING SOIC − D Tape and reel SN74AC11IDRQ1 AC11IQ1 TSSOP − PW Tape and reel SN74AC11IPWRQ1 AC11IQ1 † For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at http://www.ti.com. ‡ Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging. FUNCTION TABLE (each gate) INPUTS A B C OUTPUT Y H H H H L X X L X L X L X X L L Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2008, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN74AC11-Q1 TRIPLE 3-INPUT POSITIVE-AND GATE SCLS523A − AUGUST 2003 − REVISED APRIL 2008 logic diagram, each gate (positive logic) 1A 1B 1C 2A 2B 2C 3A 3B 3C 1 2 13 12 3 4 5 6 11 10 9 8 1Y 2Y 3Y absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±200 mA Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN74AC11-Q1 TRIPLE 3-INPUT POSITIVE-AND GATE SCLS523A − AUGUST 2003 − REVISED APRIL 2008 recommended operating conditions (see Note 3) VCC Supply voltage VIH High-level High level input voltage VCC = 3 V MIN MAX 2 6 UNIT V 2.1 VCC = 4.5 V 3.15 VCC = 5.5 V 3.85 VCC = 3 V V 0.9 VCC = 4.5 V 1.35 VIL Low-level Low level input voltage VI Input voltage 0 VCC V VO Output voltage 0 VCC V IOH High-level High level output current VCC = 5.5 V IOL Low-level Low level output current ∆t/∆v Input transition rise or fall rate TA Operating free-air temperature V 1.65 VCC = 3 V −12 VCC = 4.5 V −24 VCC = 5.5 V −24 VCC = 3 V 12 VCC = 4.5 V 24 VCC = 5.5 V 24 −40 mA mA 8 ns/V 85 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = −50 50 µA VOH IOH = −12 mA IOH = −24 24 mA VOL TA = 25°C MAX MIN MIN TYP 3V 2.9 2.99 2.9 4.5 V 4.4 4.49 4.4 5.5 V 5.4 5.49 3V 2.56 2.46 4.5 V 3.86 3.76 5.5 V 4.86 4.76 MAX V 5.5 V IOH = −75 mA† 5.5 V 3V 0.002 0.1 0.1 IOL = 50 µA 4.5 V 0.001 0.1 0.1 5.5 V 0.001 IOL = 12 mA 0.1 0.1 0.36 0.44 4.5 V 0.36 0.44 5.5 V 0.36 0.44 5.5 V IOL = 75 mA† 5.5 V II VI = VCC or GND ICC VI = VCC or GND, Ci VI = VCC or GND IO = 0 3.85 3V IOL = 50 mA† UNIT 5.4 IOH = −50 mA† IOL = 24 mA † VCC V 1.65 5.5 V ±0.1 ±1 µA 5.5 V 2 20 µA 5V 2.6 pF Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN74AC11-Q1 TRIPLE 3-INPUT POSITIVE-AND GATE SCLS523A − AUGUST 2003 − REVISED APRIL 2008 switching characteristics over recommended operating free-air temperature range, VCC = 3.3 V " 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL FROM (INPUT) TO (OUTPUT) A B A, B, or C Y TA = 25°C MIN MAX MIN TYP MAX 1.5 5.5 9.5 1 10 1.5 5.5 8.5 1 9.5 UNIT ns switching characteristics over recommended operating free-air temperature range, VCC = 5 V " 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL FROM (INPUT) TO (OUTPUT) A B A, B, or C Y TA = 25°C MIN MAX 8 1 8.5 7 1 7.5 MIN TYP MAX 1.5 4 1.5 4 UNIT ns operating characteristics, VCC = 5 V, TA = 25°C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance CL = 50pF, f = 1 MHz TYP UNIT 20 pF PARAMETER MEASUREMENT INFORMATION TEST tPLH/tPHL S1 Open From Output Under Test CL = 50 pF (see Note A) S1 Open 50% VCC 50 % VCC 0V tPHL tPLH 2 × VCC 500 Ω VCC Input (see Note B) In-Phase Output 50% VCC tPLH tPHL 500 Ω Out-of-Phase Output LOAD CIRCUIT VOH 50% VCC VOL 50% VCC VOH 50% VCC VOL VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr v 2.5 ns, tf v 2.5 ns. C. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) SN74AC11IDRG4Q1 ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 AC11IQ1 SN74AC11IPWRG4Q1 ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 AC11IQ1 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of