SN74ACT10QPWRG4Q1

SN74ACT10-Q1 TRIPLE 3-INPUT POSITIVE-NAND GATE SCAS784A – OCTOBER 2004 − REVISED JANUARY 2008 D D D D D D OR PW PACKAGE (TOP VIEW) Qualified for Automotive Applications 4.5-V to 5.5-V VCC Operation Inputs Accept Voltages to 5.5 V Max tpd of 9.5 ns at 5 V Inputs Are TTL-Voltage Compatible 1A 1B 2A 2B 2C 2Y GND description/ordering information The SN74ACT10 device contains three independent 3-input NAND gates. The device performs the Boolean functions Y = A • B • C or Y = A + B + C in positive logic. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 1C 1Y 3A 3B 3C 3Y ORDERING INFORMATION† −40°C 40°C to 125°C ORDERABLE PART NUMBER PACKAGE‡ TA TOP-SIDE MARKING SOIC − D Tape and reel SN74ACT10QDRQ1§ ACT10Q TSSOP − PW Tape and reel SN74ACT10QPWRQ1 ACT10Q † For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. ‡ Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. § Product Preview FUNCTION TABLE (each gate) INPUTS A B C OUTPUT Y H H H L L X X H X L X H X X L H logic diagram, each gate (positive logic) 1A 1B 1C 2A 2B 2C 3A 3B 3C 1 2 13 12 3 4 5 6 11 10 9 8 1Y 2Y 3Y Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2008, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN74ACT10-Q1 TRIPLE 3-INPUT POSITIVE-NAND GATE SCAS784A – OCTOBER 2004 − REVISED JANUARY 2008 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±200 mA Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 3) VCC Supply voltage VIH High-level input voltage VIL Low-level input voltage VI Input voltage VO Output voltage IOH MIN MAX 4.5 5.5 2 UNIT V V 0.8 V 0 VCC V 0 VCC V High-level output current −24 mA IOL Low-level output current 24 mA ∆t/∆v Input transition rise or fall rate 8 ns/V TA Operating free-air temperature −40 125 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN74ACT10-Q1 TRIPLE 3-INPUT POSITIVE-NAND GATE SCAS784A – OCTOBER 2004 − REVISED JANUARY 2008 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VOH IOH = −24 24 mA † ‡ 4.4 4.49 4.4 5.5 V 5.4 5.49 5.4 5.4 4.5 V 3.86 3.7 3.76 5.5 V 4.86 4.7 4.76 5.5 V IOH = −75 mA† 5.5 V IOL = 50 µA A VOL TYP IOH = −50 mA† IOL = 24 mA 5.5 V 0.001 ∆ICC‡ One input at 3.4 V, Other inputs at GND or VCC Ci VI = VCC or GND IO = 0 UNIT MAX 4.4 V 0.1 0.1 0.1 0.1 0.1 0.1 0.36 0.5 0.44 5.5 V 0.36 0.5 0.44 5.5 V VI = VCC or GND, MIN 4.5 V 5.5 V VI = VCC or GND MAX 3.85 0.001 IOL = 75 mA† ICC MIN 3.85 4.5 V IOL = 50 mA† II MAX TA = −40°C to 85°C MIN 4.5 V 50 µA A IOH = −50 TA = −40°C to 125°C TA = 25°C VCC V 1.65 1.65 5.5 V ±0.1 ±1 ±1 µA 5.5 V 4 80 40 µA 1.6 1.5 mA 5.5 V 0.6 5V 2.6 pF Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms. This is the increase in supply current for each input that is at one of the specified TTL voltage levels, rather than 0 V or VCC. switching characteristics over recommended operating free-air temperature range, VCC = 5 V " 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL FROM (INPUT) TO (OUTPUT) Any Y TA = −40°C to 125°C TA = 25°C TA = −40°C to 85°C MIN TYP MAX MIN MAX MIN MAX 1 6.5 9 1 10 1 10 1 6.5 9 1 9.5 1 9.5 UNIT ns operating characteristics, VCC = 5 V, TA = 25°C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance CL = 50 pF, POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 f = 1 MHz TYP UNIT 25 pF 3 SN74ACT10-Q1 TRIPLE 3-INPUT POSITIVE-NAND GATE SCAS784A – OCTOBER 2004 − REVISED JANUARY 2008 PARAMETER MEASUREMENT INFORMATION TEST tPLH/tPHL S1 Open CL = 50 pF (see Note A) 500 Ω S1 Open 1.5 V 1.5 V 0V tPHL tPLH 2 × VCC From Output Under Test 3V Input (see Note B) In-Phase Output 50% VCC tPHL 500 Ω Out-of-Phase Output LOAD CIRCUIT VOH 50% VCC VOL tPLH 50% VCC VOH 50% VCC VOL VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr v 2.5 ns, tf v 2.5 ns. C. The outputs are measured one at a time, with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) SN74ACT10QPWRG4Q1 ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 ACT10Q (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of