SGDS019A − FEBRUARY 2002 − REVISED APRIL 2008
D Qualified for Automotive Applications
D EPIC (Enhanced-Performance Implanted
D OR PW PACKAGE
(TOP VIEW)
CMOS) Process
1A
1B
1Y
2A
2B
2Y
GND
D Operating Range 2-V to 5.5-V VCC
D Latch-Up Performance Exceeds 250 mA Per
D
JESD 17
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
1
14
2
13
3
12
4
11
5
10
6
9
7
8
VCC
4B
4A
4Y
3B
3A
3Y
description
The SN74AHC32Q is a quadruple 2-input positive-OR gate. This device performs the Boolean function
Y + A • B or Y + A ) B in positive logic.
ORDERING INFORMATION{
−40°C to 125°C
ORDERABLE
PART NUMBER
PACKAGE‡
TA
TOP-SIDE
MARKING
SOIC − D
Tape and reel
SN74AHC32QDRQ1
AHC32Q
TSSOP − PW
Tape and reel
SN74AHC32QPWRQ1
HA32Q
† For the most current package and ordering information, see the Package Option Addendum at the end of
this document, or see the TI web site at http://www.ti.com.
‡ Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging.
FUNCTION TABLE
(each gate)
INPUTS
A
B
OUTPUT
Y
H
X
H
X
H
H
L
L
L
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments.
Copyright 2008, Texas Instruments Incorporated
! "#$ ! %#&'" ($)
(#"! " !%$""! %$ *$ $! $+! !#$!
!(( ,-) (#" %"$!!. ($! $"$!!'- "'#($
$!. '' %$$!)
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SGDS019A − FEBRUARY 2002 − REVISED APRIL 2008
logic symbol†
1A
1B
2A
2B
3A
3B
4A
4B
1
≥1
2
3
1Y
4
6
5
2Y
9
8
10
3Y
12
11
13
4Y
† This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
logic diagram (positive logic)
A
Y
B
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V
Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −20 mA
Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SGDS019A − FEBRUARY 2002 − REVISED APRIL 2008
recommended operating conditions (see Note 3)
VCC
VIH
Supply voltage
VCC = 2 V
VCC = 3 V
High-level input voltage
5.5
2.1
∆t/∆v
Input transition rise or fall rate
V
1.65
0
5.5
V
0
VCC
−50
mA
VCC = 2 V
VCC = 3.3 V ± 0.3 V
Low-level output current
V
0.9
V
−4
VCC = 5 V ± 0.5 V
VCC = 2 V
IOL
V
0.5
Output voltage
High-level output current
UNIT
3.85
Input voltage
IOH
2
VCC = 3 V
VCC = 5.5 V
Low-level input voltage
VI
VO
MAX
1.5
VCC = 5.5 V
VCC = 2 V
VIL
MIN
−8
50
VCC = 3.3 V ± 0.3 V
VCC = 5 V ± 0.5 V
4
VCC = 3.3 V ± 0.3 V
VCC = 5 V ± 0.5 V
100
8
20
mA
mA
mA
ns/V
TA
Operating free-air temperature
−40
125
°C
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
IOH = −50 mA
VCC
MIN
TA = 25°C
TYP
MAX
MIN
2V
1.9
2
1.9
3V
2.9
3
2.9
4.5 V
4.4
4.5
4.4
IOH = −4 mA
3V
2.58
IOH = −8 mA
4.5 V
3.94
VOH
IOL = 50 mA
MAX
UNIT
V
2.48
3.8
2V
0.1
0.1
3V
0.1
0.1
4.5 V
0.1
0.1
IOL = 4 mA
3V
0.36
0.5
IOL = 8 mA
4.5 V
0.36
0.5
0 V to 5.5 V
±0.1
±1
mA
2
20
mA
VOL
II
ICC
VI = 5.5 V or GND
VI = VCC or GND,
Ci
VI = VCC or GND
IO = 0
5.5 V
5V
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
2
10
V
pF
3
SGDS019A − FEBRUARY 2002 − REVISED APRIL 2008
switching characteristics over recommended operating free-air temperature range,
VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
tPLH
tPHL
A or B
Y
CL = 15 pF
tPLH
tPHL
A or B
Y
CL = 50 pF
MIN
TA = 25°C
TYP
MAX
MIN
MAX
5.5
7.9
1
9.5
5.5
7.9
1
9.5
8
11.4
1
13
8
11.4
1
13
UNIT
ns
ns
switching characteristics over recommended operating free-air temperature range,
VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
tPLH
tPHL
A or B
Y
CL = 15 pF
tPLH
tPHL
A or B
Y
CL = 50 pF
MIN
TA = 25°C
TYP
MAX
MIN
MAX
3.8
5.5
1
6.5
3.8
5.5
1
6.5
5.3
7.5
1
8.5
5.3
7.5
1
8.5
MIN
TYP
MAX
UNIT
ns
ns
noise characteristics, VCC = 5 V, CL = 50 pF, TA = 25°C (see Note 4)
PARAMETER
UNIT
VOL(P)
VOL(V)
Quiet output, maximum dynamic VOL
0.3
0.8
V
Quiet output, minimum dynamic VOL
−0.3
−0.8
V
VOH(V)
VIH(D)
Quiet output, minimum dynamic VOH
4.7
High-level dynamic input voltage
V
3.5
VIL(D)
Low-level dynamic input voltage
NOTE 4: Characteristics are for surface-mount packages only.
V
1.5
V
TYP
UNIT
operating characteristics, VCC = 5 V, TA = 25°C
PARAMETER
Cpd
4
TEST CONDITIONS
Power dissipation capacitance
No load,
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
f = 1 MHz
14
pF
SGDS019A − FEBRUARY 2002 − REVISED APRIL 2008
PARAMETER MEASUREMENT INFORMATION
From Output
Under Test
RL = 1 kΩ
From Output
Under Test
Test
Point
S1
VCC
Open
TEST
GND
CL
(see Note A)
CL
(see Note A)
S1
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
Open Drain
Open
VCC
GND
VCC
LOAD CIRCUIT FOR
3-STATE AND OPEN-DRAIN OUTPUTS
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
VCC
50% VCC
Timing Input
tw
tsu
VCC
Input
50% VCC
50% VCC
0V
th
VCC
50% VCC
Data Input
50% VCC
0V
0V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VOLTAGE WAVEFORMS
PULSE DURATION
VCC
50% VCC
Input
50% VCC
0V
tPLH
In-Phase
Output
tPHL
50% VCC
tPHL
Out-of-Phase
Output
VOH
50% VCC
VOL
Output
Waveform 1
S1 at VCC
(see Note B)
50% VCC
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
50% VCC
50% VCC
0V
tPZL
tPLZ
≈VCC
50% VCC
tPZH
tPLH
VOH
50% VCC
VOL
VCC
Output
Control
Output
Waveform 2
S1 at GND
(see Note B)
VOL + 0.3 V
VOL
tPHZ
50% VCC
VOH − 0.3 V
VOH
≈0 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.
D. The outputs are measured one at a time with one input transition per measurement.
Figure 1. Load Circuit and Voltage Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
PACKAGE OPTION ADDENDUM
www.ti.com
15-Dec-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
SN74AHC32QDRG4Q1
ACTIVE
SOIC
D
14
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
AHC32Q
Samples
SN74AHC32QDRQ1
ACTIVE
SOIC
D
14
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
AHC32Q
Samples
SN74AHC32QPWRG4Q1
ACTIVE
TSSOP
PW
14
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
HA32Q
Samples
SN74AHC32QPWRQ1
ACTIVE
TSSOP
PW
14
2000
RoHS &
Non-Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
HA32Q
Samples
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“SN74AHC32QDRQ1”相匹配的价格&库存,您可以联系我们找货
免费人工找货