SN74ALS534ANSR

SN54ALS534A, SN74ALS534A, SN74AS534 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS SDAS168B – APRIL 1982 – REVISED JULY 1996 SN54ALS534A . . . J PACKAGE SN74ALS534A, SN74AS534 . . . DW OR N PACKAGE (TOP VIEW) 3-State Bus Driving Inverting Outputs Buffered Control Inputs Package Options Include Plastic Small-Outline (DW), Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs OE 1Q 1D 2D 2Q 3Q 3D 4D 4Q GND description These octal D-type edge-triggered flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively lowimpedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC 8Q 8D 7D 7Q 6Q 6D 5D 5Q CLK 1D 1Q 2D 2Q 3Q 3D 4D 4 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 8D 7D 7Q 6Q 6D 4Q GND CLK 5Q 5D A buffered output-enable (OE) input places the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. 3 8Q SN54ALS534A . . . FK PACKAGE (TOP VIEW) On the positive transition of the clock (CLK) input, the Q outputs are set to the complement of the logic states set up at the data (D) inputs. The ’ALS534A and SN74AS534 have inverted outputs, but otherwise are functionally equivalent to the ’ALS374A and SN74AS374. OE VCC D D D OE does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are off. The SN54ALS534A is characterized for operation over the full military temperature range of – 55°C to 125°C. The SN74ALS534A and SN74AS534 are characterized for operation from 0°C to 70°C. FUNCTION TABLE (each flip-flop) INPUTS OUTPUT Q OE CLK D L ↑ H L L ↑ L H L H or L X Q0 H X X Z Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  1996, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54ALS534A, SN74ALS534A, SN74AS534 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS SDAS168B – APRIL 1982 – REVISED JULY 1996 logic symbol† 1 OE CLK 1D 2D 3D 4D 5D 6D 7D 8D 11 3 logic diagram (positive logic) OE EN C1 1D CLK 2 4 5 7 6 8 9 13 12 14 15 17 16 18 19 1 11 C1 1Q 2Q 1D 3 C1 5Q 2D 4 5 2Q 1D 6Q C1 7Q 8Q 3D † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 7 8 5D 6D 7D 8D POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 12 5Q 15 6Q 16 7Q 1D C1 18 4Q 1D C1 17 9 1D C1 14 3Q 1D C1 13 6 1D C1 4D 2 1Q 1D 3Q 4Q 2 1D 19 8Q SN54ALS534A, SN74ALS534A, SN74AS534 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS SDAS168B – APRIL 1982 – REVISED JULY 1996 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Voltage applied to a disabled 3-state output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Operating free-air temperature range, TA: SN54ALS534A . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C SN74ALS534A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. recommended operating conditions SN54ALS534A SN74ALS534A MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL IOH Low-level input voltage 0.7 0.8 High-level output current –1 – 2.6 mA IOL fclock Low-level output current 12 24 mA 35 MHz tw tsu Pulse duration, CLK high or low th TA Hold time, data after CLK↑ High-level input voltage 2 Clock frequency 2 0 Setup time, data before CLK↑ Operating free-air temperature 30 V V 0 V 16.5 14 ns 10 10 ns 0 0 – 55 125 ns 0 70 °C electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK TEST CONDITIONS VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = – 18 mA IOH = – 0.4 mA 5V VCC = 4 4.5 IOH = – 1 mA IOH = – 2.6 mA VOL VCC = 4 4.5 5V IOL = 12 mA IOL = 24 mA IOZH IOZL VCC = 5.5 V, VCC = 5.5 V, VO = 2.7 V VO = 0.4 V II IIH VCC = 5.5 V, VCC = 5.5 V, VI = 7 V VI = 2.7 V VCC = 5 5.5 5V V, VI = 0 0.4 4V VCC = 5.5 V, VO = 2.25 V Outputs high VOH IIL IO§ ICC CLK, OE D VCC = 5.5 V SN54ALS534A MIN TYP‡ MAX SN74ALS534A MIN TYP‡ MAX – 1.5 VCC – 2 2.4 – 1.5 V VCC – 2 V 3.3 2.4 0.25 – 20 Outputs low UNIT 0.4 3.2 0.25 0.4 0.35 0.5 V µA 20 20 – 20 – 20 µA 0.1 0.1 mA 20 20 µA – 0.1 – 0.1 – 0.2 – 0.2 – 112 – 30 – 112 11 19 11 19 19 28 19 28 mA mA mA Outputs disabled 10 31 20 31 ‡ All typical values are at VCC = 5 V, TA = 25°C. § The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN54ALS534A, SN74ALS534A, SN74AS534 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS SDAS168B – APRIL 1982 – REVISED JULY 1996 switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 4.5 V to 5.5 V, CL = 50 pF, R1 = 500 Ω, R2 = 500 Ω, TA = MIN to MAX† SN54ALS534A MIN fmax tPLH UNIT SN74ALS534A MAX MIN 30 MAX 35 MHz 3 17 3 12 4 18 4 16 3 19 3 17 4 20 4 18 1 12 1 OE Any Q tPLZ 1 25 2 † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. 10 tPHL tPZH tPZL tPHZ CLK An Q Any OE An Q Any 14 ns ns ns absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡ Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Voltage applied to a disabled 3-state output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Operating free-air temperature range, TA: SN74AS534 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature rang, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C ‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. recommended operating conditions SN74AS534 MIN NOM MAX 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL IOH Low-level input voltage 0.8 V High-level output current – 15 mA IOL fclock Low-level output current 48 mA 125 MHz High-level input voltage 2 Clock frequency 0 CLK high 4 CLK low 3 V V tw Pulse duration tsu th Setup time, data before CLK↑ 2 ns Hold time, data after CLK↑ 2 ns TA Operating free-air temperature 0 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 ns 70 °C SN54ALS534A, SN74ALS534A, SN74AS534 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS SDAS168B – APRIL 1982 – REVISED JULY 1996 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK SN74AS534 TYP† MAX TEST CONDITIONS MIN VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = – 18 mA IOH = – 2 mA VCC = 4.5 V, VCC = 4.5 V, IOH = – 15 mA IOL = 48 mA VCC = 5.5 V, VCC = 5.5 V, VO = 2.7 V VI = 0.4 V VCC = 5.5 V, VCC = 5.5 V, VI = 7 V VI = 2.7 V VCC = 5 5.5 5V V, VI = 0 0.4 4V IO‡ VCC = 5.5 V, VO = 2.25 V Outputs high 77 120 ICC VCC = 5.5 V Outputs low 84 128 Outputs disabled 84 128 VOH VOL IOZH IOZL II IIH IIL OE, CLK D – 1.2 VCC – 2 2.4 V V 3.3 0.34 0.5 V 50 µA – 50 µA 0.1 mA 20 µA – 0.5 –2 – 30 UNIT – 112 mA mA mA † All typical values are at VCC = 5 V, TA = 25°C. ‡ The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 4.5 V to 5.5 V, CL = 50 pF, R1 = 500 Ω, R2 = 500 Ω, TA = MIN to MAX§ SN74AS534 MIN fmax tPLH tPHL tPZH tPZL tPHZ MAX 125 CLK An Q Any OE An Q Any OE Any Q POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MHz 3 8 4 9 2 6 3 10 2 6 tPLZ 2 § For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. UNIT 6 ns ns ns 5 SN54ALS534A, SN74ALS534A, SN74AS534 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS SDAS168B – APRIL 1982 – REVISED JULY 1996 PARAMETER MEASUREMENT INFORMATION SERIES 54ALS/74ALS AND 54AS/74AS DEVICES 7V RL = R1 = R2 VCC S1 RL R1 Test Point From Output Under Test CL (see Note A) From Output Under Test RL Test Point From Output Under Test CL (see Note A) CL (see Note A) LOAD CIRCUIT FOR BI-STATE TOTEM-POLE OUTPUTS LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS 3.5 V Timing Input Test Point LOAD CIRCUIT FOR 3-STATE OUTPUTS 3.5 V High-Level Pulse 1.3 V R2 1.3 V 1.3 V 0.3 V 0.3 V tsu Data Input tw th 3.5 V 1.3 V 3.5 V Low-Level Pulse 1.3 V 0.3 V 1.3 V 0.3 V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VOLTAGE WAVEFORMS PULSE DURATIONS 3.5 V Output Control (low-level enabling) 1.3 V 1.3 V 0.3 V tPZL Waveform 1 S1 Closed (see Note B) tPLZ [3.5 V 3.5 V tPHZ VOL 0.3 V 0.3 V [0 V 1.3 V 0.3 V tPHL tPLH VOH In-Phase Output 1.3 V 1.3 V VOL tPLH tPHL VOH 1.3 V 1.3 V Input 1.3 V tPZH Waveform 2 S1 Open (see Note B) 1.3 V VOH Out-of-Phase Output (see Note C) 1.3 V 1.3 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. When measuring propagation delay items of 3-state outputs, switch S1 is open. D. All input pulses have the following characteristics: PRR ≤ 1 MHz, tr = tf = 2 ns, duty cycle = 50%. E. The outputs are measured one at a time with one transition per measurement. Figure 1. Load Circuits and Voltage Waveforms 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) SN74ALS534ADWR ACTIVE SOIC DW 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS534A SN74ALS534AN ACTIVE PDIP N 20 20 RoHS & Non-Green NIPDAU N / A for Pkg Type 0 to 70 SN74ALS534AN SN74ALS534ANSR ACTIVE SO NS 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS534A (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of