SN54ALS574B, SN54AS574, SN54AS575
SN74ALS574B, SN74ALS575A, SN74AS574, SN74AS575
OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS
SDAS165B – JUNE 1982 – REVISED JULY 1995
•
•
•
•
3-State Buffer-Type Noninverting Outputs
Drive Bus Lines Directly
Bus-Structured Pinout
Buffered Control Inputs
SN74ALS575A and ′AS575 Have
Synchronous Clear
Package Options Include Plastic
Small-Outline (DW) Packages, Ceramic
Chip Carriers (FK), Standard Plastic (N, NT)
and Ceramic (J, JT) 300-mil DIPs, and
Ceramic Flat (W) Packages
SN54ALS574B, SN54AS574 . . . J OR W PACKAGE
SN74ALS574B, SN74AS574 . . . DW OR N PACKAGE
(TOP VIEW)
OE
1D
2D
3D
4D
5D
6D
7D
8D
GND
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
VCC
1Q
2Q
3Q
4Q
5Q
6Q
7Q
8Q
CLK
SN54ALS574B, SN54AS574 . . . FK PACKAGE
(TOP VIEW)
description
2D
1D
OE
VCC
1Q
•
These octal D-type edge-triggered flip-flops
feature 3-state outputs designed specifically for
bus driving. They are particularly suitable for
implementing buffer registers, I/O ports,
bidirectional bus drivers, and working registers.
The output-enable (OE) input does not affect
internal operations of the flip-flops. Old data can
be retained or new data can be entered while the
outputs are in the high-impedance state.
4
5
6
7
8
3 2 1 20 19
18
17
16
15
14
9 10 11 12 13
2Q
3Q
4Q
5Q
6Q
8D
GND
CLK
8Q
7Q
The eight flip-flops enter data on the low-to-high
transition of the clock (CLK) input. The
SN74ALS575A, SN54AS575, and SN74AS575
may be synchronously cleared by taking the clear
(CLR) input low.
3D
4D
5D
6D
7D
SN54AS575 . . . JT OR W PACKAGE
SN74ALS575A, SN74AS575 . . . DW OR NT PACKAGE
(TOP VIEW)
CLR
OE
1D
2D
3D
4D
5D
6D
7D
8D
NC
GND
The
SN54ALS574B,
SN54AS574,
and
SN54AS575 are characterized for operation over
the full military temperature range of – 55°C to
125°C. The SN74ALS574B, SN74ALS575A,
SN74AS574, and SN74AS575 are characterized
for operation from 0°C to 70°C.
1
2
3
4
5
6
7
8
9
10
11
12
24
23
22
21
20
19
18
17
16
15
14
13
VCC
NC
1Q
2Q
3Q
4Q
5Q
6Q
7Q
8Q
CLK
NC
1D
OE
CLR
NC
VCC
NC
1Q
SN54AS575 . . . FK PACKAGE
(TOP VIEW)
4 3 2 1 28 27 26
5
25
6
24
7
23
8
22
9
21
10
20
11
19
12 13 14 15 16 17 18
2Q
3Q
4Q
NC
5Q
6Q
7Q
8D
NC
GND
NC
NC
CLK
8Q
2D
3D
4D
NC
5D
6D
7D
NC – No internal connection
Copyright 1995, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SN54ALS574B, SN54AS574, SN54AS575
SN74ALS574B, SN74ALS575A, SN74AS574, SN74AS575
OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS
SDAS165B – JUNE 1982 – REVISED JULY 1995
Function Tables
SN54ALS574B, SN74ALS574B, SN54AS574, SN74AS574
(each flip-flop)
INPUTS
OE
CLK
D
OUTPUT
Q
L
↑
H
H
L
↑
L
L
L
L
X
Q0
H
X
X
Z
SN74ALS575A, SN54AS575, SN74AS575
(each flip-flop)
INPUTS
OE
CLR
CLK
D
OUTPUT
Q
L
L
↑
X
L
L
H
↑
H
H
L
H
↑
L
L
L
H
L
X
Q0
H
X
H
X
Z
logic symbols†
SN54ALS574B, SN74ALS574B,
SN54AS574, SN74AS574
OE
CLK
1D
2D
3D
4D
5D
6D
7D
8D
1
11
2
SN74ALS575A, SN54AS575,
SN74AS575
EN
OE
C1
1D
CLK
19
3
18
4
17
5
16
6
15
7
14
8
13
9
12
1Q
CLR
2Q
1D
3Q
2D
4Q
3D
5Q
4D
6Q
5D
7Q
6D
8Q
7D
8D
2
14
1
3
POST OFFICE BOX 655303
C1
1R
1D
22
4
21
5
20
6
19
7
18
8
17
9
16
10
15
† These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown are for the DW, J, JT, N, and NT packages.
2
EN
• DALLAS, TEXAS 75265
1Q
2Q
3Q
4Q
5Q
6Q
7Q
8Q
SN54ALS574B, SN54AS574, SN54AS575
SN74ALS574B, SN74ALS575A, SN74AS574, SN74AS575
OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS
SDAS165B – JUNE 1982 – REVISED JULY 1995
logic diagrams (positive logic)
SN54ALS574B, SN74ALS574B,
SN54AS574, SN74AS574
SN74ALS575A, SN54AS575,
SN74AS575
1
OE
OE
11
CLK
CLK
C1
2
1D
19
CLR
2
14
1
1Q
1D
C1
1D
3
22
1Q
1D
To Seven Other Channels
To Seven Other Channels
Pin numbers shown are for the DW, J, JT, N, and NT packages.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Voltage applied to a disabled 3-state output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Operating free-air temperature range, TA: SN54ALS574B . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
SN74ALS574B, SN74ALS575A . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
recommended operating conditions
SN74ALS574B
SN74ALS575A
SN54ALS574B
UNIT
MIN
NOM
MAX
MIN
NOM
MAX
4.5
5
5.5
4.5
5
5.5
VCC
VIH
Supply voltage
VIL
IOH
Low-level input voltage
0.7
0.8
High-level output current
–1
– 2.6
mA
IOL
Low-level output current
12
24
mA
fclock
l k
Clock frequency
tw
Pulse duration
tsu
Set p time before CLK↑
Setup
th
Hold time after CLK↑
TA
Operating free-air temperature
High-level input voltage
2
′ALS574B
0
2
28
SN74ALS575A
′ALS574B, CLK high or low
16.5
Data
15
35
0
30
0
ns
0
– 55
• DALLAS, TEXAS 75265
125
0
MHz
ns
15
4
V
ns
15
SN74ALS575A, CLR
POST OFFICE BOX 655303
0
16.5
SN74ALS575A, CLR
Data
V
14
SN74ALS575A, CLK high or low
V
70
°C
3
SN54ALS574B, SN54AS574, SN54AS575
SN74ALS574B, SN74ALS575A, SN74AS574, SN74AS575
OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS
SDAS165B – JUNE 1982 – REVISED JULY 1995
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TYP†
MIN
VIK
VCC = 4.5 V,
VCC = 4.5 V to 5.5 V,
II = – 18 mA
IOH = – 0.4 mA
VCC = 4
4.5
5V
IOH = – 1 mA
IOH = – 2.6 mA
VOL
VCC = 4
4.5
5V
IOL = 12 mA
IOL = 24 mA
IOZH
IOZL
VCC = 5.5 V,
VCC = 5.5 V,
VO = 2.7 V
VO = 0.4 V
II
IIH
VCC = 5.5 V,
VCC = 5.5 V,
VI = 7 V
VI = 2.7 V
IIL
IO‡
VCC = 5.5 V,
VCC = 5.5 V,
VI = 0.4 V
VO = 2.25 V
VOH
′ALS574B
VCC = 5.5 V
ICC
SN74ALS575A
VCC = 5.5 V
SN74ALS574B
SN74ALS575A
SN54ALS574B
TEST CONDITIONS
MAX
MIN
TYP†
– 1.2
VCC – 2
2.4
UNIT
MAX
– 1.2
V
VCC – 2
V
3.3
2.4
0.25
– 20
3.2
0.4
0.25
0.4
0.35
0.5
V
µA
20
20
– 20
– 20
µA
0.1
0.1
mA
20
20
µA
– 0.2
– 0.2
mA
– 112
mA
– 112
– 30
Outputs high
11
18
11
18
Outputs low
17
27
17
27
Outputs disabled
17
28
17
28
Outputs high
10
17
10
17
Outputs low
15
24
15
24
Outputs disabled
16
30
16
mA
30
† All typical values are at VCC = 5 V, TA = 25°C.
‡ The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
switching characteristics (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC = 4.5 V to 5.5 V,
CL = 50 pF,
R1 = 500 Ω,
R2 = 500 Ω,
TA = MIN to MAX§
SN54ALS574B SN74ALS574B SN74ALS575A
MIN
fmax
tPLH
tPHL
tPZH
tPZL
tPHZ
MAX
28
CLK
Q
OE
Q
MIN
MAX
MIN
35
4
POST OFFICE BOX 655303
MAX
30
MHz
4
22
3
14
4
14
4
17
4
14
4
14
4
21
3
18
4
18
4
26
4
18
4
18
2
10
3
13
2
16
1
10
OE
Q
tPLZ
2
25
2
12
§ For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
• DALLAS, TEXAS 75265
UNIT
ns
ns
ns
SN54ALS574B, SN54AS574, SN54AS575
SN74ALS574B, SN74ALS575A, SN74AS574, SN74AS575
OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS
SDAS165B – JUNE 1982 – REVISED JULY 1995
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Voltage applied to a disabled 3-state output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Operating free-air temperature range, TA: SN54AS574, SN54AS575 . . . . . . . . . . . . . . . . . . – 55°C to 125°C
SN74AS574, SN74AS575 . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
recommended operating conditions
SN54AS574
SN54AS575
VCC
VIH
Supply voltage
VIL
IOH
Low-level input voltage
IOL
fclock*
tw*
Pulse duration
tsu*
Set p time before CLK↑
Setup
th*
Hold time after CLK↑
High-level input voltage
SN74AS574
SN74AS575
UNIT
MIN
NOM
MAX
MIN
NOM
MAX
4.5
5
5.5
4.5
5
5.5
2
2
V
V
0.8
0.8
V
High-level output current
– 12
– 15
mA
Low-level output current
32
48
mA
90
MHz
Clock frequency
0
100
0
CLK high
5
5.5
CLK low
4
5.5
Data
3
5.5
6.5
6.5
Data
3
3
′AS575, CLR
0
0
′AS575, CLR high or low
TA
Operating free-air temperature
– 55
125
0
70
* On products compliant to MIL-STD-883, Class B, this parameter is based on characterization data but is not production tested.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
ns
ns
ns
°C
5
SN54ALS574B, SN54AS574, SN54AS575
SN74ALS574B, SN74ALS575A, SN74AS574, SN74AS575
OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS
SDAS165B – JUNE 1982 – REVISED JULY 1995
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
SN54AS574
SN54AS575
TEST CONDITIONS
MIN
VIK
VCC = 4.5 V,
VCC = 4.5 V to 5.5 V,
II = – 18 mA
IOH = – 2 mA
VCC = 4
4.5
5V
IOH = – 12 mA
IOH = – 15 mA
VOL
VCC = 4
4.5
5V
IOL = 32 mA
IOL = 48 mA
IOZH
IOZL
VCC = 5.5 V,
VCC = 5.5 V,
VO = 2.7 V
VO = 0.4 V
II
IIH
VCC = 5.5 V,
VCC = 5.5 V,
VI = 7 V
VI = 2.7 V
VOH
IIL
OE, CLK, CLR
D
IO‡
′AS574
VCC = 5
5.5
5V
V,
VI = 0
0.4
4V
VCC = 5.5 V,
VO = 2.25 V
Outputs high
VCC = 5.5 V
ICC
′AS575
VCC = 5.5 V
TYP†
SN74AS574
SN74AS575
MAX
MIN
TYP†
– 1.2
VCC – 2
2.4
UNIT
MAX
– 1.2
V
VCC – 2
V
3.2
2.4
0.29
3.3
0.5
0.34
– 30
0.5
V
µA
50
50
– 50
– 50
µA
0.1
0.1
mA
µA
20
20
– 0.5
– 0.5
–3
–2
– 112
– 30
– 112
73
116
73
116
Outputs low
85
134
85
134
Outputs disabled
84
134
84
134
Outputs high
78
126
78
126
Outputs low
89
142
89
142
mA
mA
mA
Outputs disabled
88
142
88
142
† All typical values are at VCC = 5 V, TA = 25°C.
‡ The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
switching characteristics (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC = 4.5 V to 5.5 V,
CL = 50 pF,
R1 = 500 Ω,
R2 = 500 Ω,
TA = MIN to MAX§
SN54AS574
SN54AS575
MIN
fmax*
tPLH
tPHL
tPZH
tPZL
tPHZ
MAX
100
CLK
An Q
Any
OE
An Q
Any
UNIT
SN74AS574
SN74AS575
MIN
MAX
90
MHz
3
11
3
8
4
11
4
9
2
7
2
6
3
11
3
10
2
7
2
6
OE
Any Q
tPLZ
2
7
2
6
* On products compliant to MIL-STD-883, Class B, this parameter is based on characterization data but is not production tested.
§ For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
ns
ns
ns
SN54ALS574B, SN54AS574, SN54AS575
SN74ALS574B, SN74ALS575A, SN74AS574, SN74AS575
OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS
SDAS165B – JUNE 1982 – REVISED JULY 1995
PARAMETER MEASUREMENT INFORMATION
SERIES 54ALS/74ALS AND 54AS/74AS DEVICES
7V
RL = R1 = R2
VCC
S1
RL
R1
Test
Point
From Output
Under Test
CL
(see Note A)
From Output
Under Test
RL
Test
Point
From Output
Under Test
CL
(see Note A)
CL
(see Note A)
LOAD CIRCUIT FOR
BI-STATE
TOTEM-POLE OUTPUTS
LOAD CIRCUIT
FOR OPEN-COLLECTOR OUTPUTS
3.5 V
Timing
Input
Test
Point
LOAD CIRCUIT
FOR 3-STATE OUTPUTS
3.5 V
High-Level
Pulse
1.3 V
R2
1.3 V
1.3 V
0.3 V
0.3 V
Data
Input
tw
th
tsu
3.5 V
1.3 V
3.5 V
Low-Level
Pulse
1.3 V
0.3 V
1.3 V
0.3 V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VOLTAGE WAVEFORMS
PULSE DURATIONS
3.5 V
Output
Control
(low-level
enabling)
1.3 V
1.3 V
0.3 V
tPZL
Waveform 1
S1 Closed
(see Note B)
tPLZ
[3.5 V
1.3 V
tPHZ
tPZH
Waveform 2
S1 Open
(see Note B)
1.3 V
VOL
0.3 V
VOH
1.3 V
0.3 V
[0 V
3.5 V
1.3 V
Input
1.3 V
0.3 V
tPHL
tPLH
VOH
In-Phase
Output
1.3 V
1.3 V
VOL
tPLH
tPHL
VOH
Out-of-Phase
Output
(see Note C)
1.3 V
1.3 V
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. When measuring propagation delay items of 3-state outputs, switch S1 is open.
D. All input pulses have the following characteristics: PRR ≤ 1 MHz, tr = tf = 2 ns, duty cycle = 50%.
E. The outputs are measured one at a time with one transition per measurement.
Figure 1. Load Circuits and Voltage Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
PACKAGE OPTION ADDENDUM
www.ti.com
14-Oct-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
84001012A
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
84001012A
SNJ54ALS
574BFK
8400101RA
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
8400101RA
SNJ54ALS574BJ
Samples
8400101SA
ACTIVE
CFP
W
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
8400101SA
SNJ54ALS574BW
Samples
JM38510/37104B2A
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
37104B2A
Samples
JM38510/37104BRA
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
37104BRA
Samples
M38510/37104B2A
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
37104B2A
Samples
M38510/37104BRA
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
37104BRA
Samples
SN54ALS574BJ
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
SN54ALS574BJ
Samples
SN54AS574J
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
SN54AS574J
Samples
SN74ALS574BDW
ACTIVE
SOIC
DW
20
25
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
ALS574B
Samples
SN74ALS574BDWR
ACTIVE
SOIC
DW
20
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
ALS574B
Samples
SN74ALS574BN
ACTIVE
PDIP
N
20
20
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN74ALS574BN
Samples
SN74ALS574BNE4
ACTIVE
PDIP
N
20
20
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN74ALS574BN
Samples
SN74ALS574BNSR
ACTIVE
SO
NS
20
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
ALS574B
Samples
SN74ALS575ADW
ACTIVE
SOIC
DW
24
25
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
ALS575A
Samples
SN74AS574DW
ACTIVE
SOIC
DW
20
25
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
AS574
Samples
SN74AS574DWR
ACTIVE
SOIC
DW
20
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
AS574
Samples
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
14-Oct-2022
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
SN74AS574N
ACTIVE
PDIP
N
20
20
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
0 to 70
SN74AS574N
SNJ54ALS574BFK
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
84001012A
SNJ54ALS
574BFK
SNJ54ALS574BJ
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
8400101RA
SNJ54ALS574BJ
Samples
SNJ54ALS574BW
ACTIVE
CFP
W
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
8400101SA
SNJ54ALS574BW
Samples
SNJ54AS574J
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
SNJ54AS574J
Samples
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of