SN74AUC1G07DCKR

Product Folder Order Now Technical Documents Support & Community Tools & Software SN74AUC1G07 SCES373R – SEPTEMBER 2001 – REVISED JUNE 2017 SN74AUC1G07 Single Buffer/Driver With Open-Drain Output 1 Features 3 Description • This single buffer/driver is operational at 0.8-V to 2.7V VCC, but is designed specifically for 1.65-V to 1.95V VCC operation. 1 • • • • • • • • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) Available in the Texas Instruments NanoFree™ Package Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation Ioff Supports Partial Power Down Mode and Back Drive Protection Sub-1-V Operable Max tpd of 2.5 ns at 1.8 V Low Power Consumption, 10-µA Maximum ICC ±8-mA Output Drive at 1.8 V • • • • • NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. For more information about AUC Little Logic devices, see Applications of Texas Instruments AUC Sub-1-V Little Logic Devices, SCEA027. Device Information(1) 2 Applications • • • • • • • The output of the SN74AUC1G07 is open drain and can be connected to other open-drain outputs to implement active-low wired-OR or active-high wiredAND functions. PART NUMBER AV Receiver Audio Dock: Portable Blu-Ray Player and Home Theater Embedded PC MP3 Player/Recorder (Portable Audio) Personal Digital Assistant (PDA) Power: Telecom/Server AC/DC Supply: Single Controller: Analog and Digital Solid State Drive (SSD): Client and Enterprise TV: LCD/Digital and High-Definition (HDTV) Tablet: Enterprise Video Analytics: Server Wireless Headset, Keyboard, and Mouse PACKAGE BODY SIZE (NOM) SN74AUC1G07DBV SOT-23 (5) 2.90 mm × 1.60 mm SN74AUC1G07DCK SC70 (5) 2.00 mm × 1.25 mm SN74AUC1G07YZP 1.75 mm × 1.25 mm DSBGA (5) (1) For all available packages, see the orderable addendum at the end of the data sheet. Logic Diagram (Positive Logic) A 2 4 Y 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION DATA. SN74AUC1G07 SCES373R – SEPTEMBER 2001 – REVISED JUNE 2017 www.ti.com Table of Contents 1 2 3 4 5 6 Features .................................................................. Applications ........................................................... Description ............................................................. Revision History..................................................... Pin Configuration and Functions ......................... Specifications......................................................... 1 1 1 2 3 4 6.1 6.2 6.3 6.4 6.5 6.6 6.7 4 4 4 5 5 5 5 Absolute Maximum Ratings ..................................... ESD Ratings.............................................................. Recommended Operating Conditions....................... Thermal Information .................................................. Electrical Characteristics........................................... Switching Characteristics: CL = 15 pF ...................... Switching Characteristics: CL = 30 pF ...................... 6.8 Operating Characteristics.......................................... 5 7 8 Parameter Measurement Information .................. 6 Detailed Description .............................................. 7 8.1 Functional Block Diagram ......................................... 7 8.2 Device Functional Modes.......................................... 7 9 Device and Documentation Support.................... 8 9.1 9.2 9.3 9.4 9.5 9.6 Documentation Support ............................................ Receiving Notification of Documentation Updates.... Community Resources.............................................. Trademarks ............................................................... Electrostatic Discharge Caution ................................ Glossary .................................................................... 8 8 8 8 8 8 10 Mechanical, Packaging, and Orderable Information ............................................................. 8 4 Revision History NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision Q (July 2007) to Revision R Page • Added Device Information table, ESD Ratings table, Thermal Information table, Feature Description section, Device Functional Modes, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section ................................................................................................................................................................. 1 • Deleted Ordering Information see Mechanical, Packaging, and Orderable Information section at the end of the data sheet ....................................................................................................................................................................................... 1 • Deleted DRY package throughout data sheet ....................................................................................................................... 1 • Changed output in Function Table from: "H" to: "Hi-Z" .......................................................................................................... 7 2 Submit Documentation Feedback Copyright © 2001–2017, Texas Instruments Incorporated Product Folder Links: SN74AUC1G07 SN74AUC1G07 www.ti.com SCES373R – SEPTEMBER 2001 – REVISED JUNE 2017 5 Pin Configuration and Functions DBV Package 5-Pin SOT-23 Top View NC 1 A 2 GND 3 5 4 DCK Package 5-Pin SC70 Top View VCC Y NC 1 A 2 GND 3 5 VCC 4 Y YZP Package 5-Pin DSBGA Bottom View 1 2 C GND Y B A A DNU VCC Not to scale See mechanical drawings for dimensions. DNU – Do not use NC – No internal connection Pin Functions PIN NAME I/O DESCRIPTION DBV, DCK YZP A 2 B1 I Logic input DNU — A1 — Do not use NC 1 — — No internal connection GND 3 C1 — Ground VCC 5 A2 — Positive supply Y 4 C2 O Open-drain output Submit Documentation Feedback Copyright © 2001–2017, Texas Instruments Incorporated Product Folder Links: SN74AUC1G07 3 SN74AUC1G07 SCES373R – SEPTEMBER 2001 – REVISED JUNE 2017 www.ti.com 6 Specifications 6.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) VCC MIN MAX UNIT Supply voltage –0.5 3.6 V (2) –0.5 3.6 V –0.5 3.6 V VI Input voltage VO Output voltage (2) IIK Input clamp current VI < 0 –50 mA IOK Output clamp current VO < 0 –50 mA IO Continuous output current ±20 mA Continuous current through VCC or GND ±100 mA 150 °C Tstg (1) (2) Storage temperature –65 Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. 6.2 ESD Ratings VALUE V(ESD) (1) (2) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1) 2000 Charged-device model (CDM), per JEDEC specification JESD22C101 (2) 1000 Machine Model (A115-A) 200 UNIT V JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 6.3 Recommended Operating Conditions See (1) VCC Supply voltage VCC = 0.8 V VIH High-level input voltage MIN MAX UNIT 0.8 2.7 V VCC VCC = 1.1 V to 1.95 V 0.65 × VCC VCC = 2.3 V to 2.7 V 1.7 VCC = 0.8 V VIL Low-level input voltage V 0 VCC = 1.1 V to 1.95 V 0.35 × VCC VCC = 2.3 V to 2.7 V 0.7 V VI Input voltage 0 3.6 V VO Output voltage 0 3.6 V IOL Low-level output current VCC = 0.8 V 0.7 VCC = 1.1 V 3 VCC = 1.4 V 5 VCC = 1.65 V 8 VCC = 2.3 V Δt/Δv Input transition rise or fall rate TA Operating free-air temperature (1) 4 mA 9 –40 15 ns/V 85 °C All unused inputs of the device must be held at VCC or GND to ensure proper device operation. See Implications of Slow or Floating CMOS Inputs, SCBA004. Submit Documentation Feedback Copyright © 2001–2017, Texas Instruments Incorporated Product Folder Links: SN74AUC1G07 SN74AUC1G07 www.ti.com SCES373R – SEPTEMBER 2001 – REVISED JUNE 2017 6.4 Thermal Information SN74AUC1G07 THERMAL METRIC (1) RθJA (1) DBV (SOT-23) DCK (SC70) YZP (DSBGA) 5 PINS 5 PINS 5 PINS 206 252 132 Junction-to-ambient thermal resistance UNIT °C/W For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report. 6.5 Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VOL II MAX IOL = 100 µA 0.8 V to 2.7 V IOL = 0.7 mA 0.8 V IOL = 3 mA 1.1 V 0.3 IOL = 5 mA 1.4 V 0.4 IOL = 8 mA 1.65 V 0.45 IOL = 9 mA 2.3 V 0.6 UNIT 0.2 0.25 V VI = VCC or GND 0 to 2.7 V ±5 µA Ioff VI or VO = 2.7 V 0 ±10 µA ICC VI = VCC or GND, 0.8 V to 2.7 V 10 µA Ci VI = VCC or GND 2.5 V 3 pF Co VO = VCC or GND 2.5 V 3.5 pF (1) A input MIN TYP (1) VCC IO = 0 All typical values are at TA = 25°C. 6.6 Switching Characteristics: CL = 15 pF over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 1) PARAMETER VCC = 1.2 V ± 0.1 V VCC = 1.5 V ± 0.1 V VCC = 1.8 V ± 0.15 V FROM (INPUT) TO (OUTPUT) VCC = 0.8 V TYP MIN MAX MIN MAX A Y 4.7 0.3 3.3 0.2 2.4 tpd VCC = 2.5 V ± 0.2 V MIN TYP MAX MIN MAX 0.2 1.1 2.3 0.2 1.8 UNIT ns 6.7 Switching Characteristics: CL = 30 pF over recommended operating free-air temperature range, CL = 30 pF (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) A Y tpd VCC = 1.8 V ± 0.15 V MIN 0.8 VCC = 2.5 V ± 0.2 V TYP MAX 1.9 2.5 UNIT MIN MAX 0.2 1.8 ns 6.8 Operating Characteristics TA = 25°C Cpd PARAMETER TEST CONDITIONS VCC = 1.2 V VCC = 1.5 V VCC = 1.8 V VCC = 2.5 V TYP TYP TYP TYP Power dissipation capacitance f = 10 MHz 2 3 3 5 Submit Documentation Feedback Copyright © 2001–2017, Texas Instruments Incorporated Product Folder Links: SN74AUC1G07 UNIT pF 5 SN74AUC1G07 SCES373R – SEPTEMBER 2001 – REVISED JUNE 2017 www.ti.com 7 Parameter Measurement Information 2 × VCC S1 RL From Output Under Test Open GND CL (see Note A) TEST S1 t PLH/t PHL t PLZ/t PZL t PHZ/t PZH Open 2 × VCC GND RL LOAD CIRCUIT VCC CL RL VD 0.8 V 1.2 V ± 0.1 V 1.5 V ± 0.1 V 1.8 V ± 0.15 V 2.5 V ± 0.2 V 1.8 V ± 0.15 V 2.5 V ± 0.2 V 15 pF 15 pF 15 pF 15 pF 15 pF 30 pF 30 pF 2 kΩ 2 kΩ 2 kΩ 2 kΩ 2 kΩ 1 kΩ 500 Ω 0.1 V 0.1 V 0.1 V 0.15 V 0.15 V 0.15 V 0.15 V VCC Timing Input VCC/2 0V tw t su VCC VCC/2 Input VCC/2 th VCC VCC/2 Data Input VCC/2 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VCC VCC/2 Input VCC/2 0V t PHL t PLH VOH VCC/2 Output VCC/2 VOL t PHL Output Waveform 1 S1 at 2 × VCC (see Note B) VCC/2 VCC/2 VCC/2 VOL VCC/2 0V t PZL t PLZ VCC VCC/2 t PZH t PLH VOH Output VCC Output Control Output Waveform 2 S1 at GND (see Note B) VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS VOL + VD VOL t PHZ VCC/2 VOH − VD VOH ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR≤ 10 MHz, ZO = 50 Ω, slew rate ≥ 1 V/ns. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. t PZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms 6 Submit Documentation Feedback Copyright © 2001–2017, Texas Instruments Incorporated Product Folder Links: SN74AUC1G07 SN74AUC1G07 www.ti.com SCES373R – SEPTEMBER 2001 – REVISED JUNE 2017 8 Detailed Description 8.1 Functional Block Diagram A 2 4 Y Figure 2. Logic Diagram (Positive Logic) 8.2 Device Functional Modes Table 1 lists the functional modes of the SN74AUC1G07. Table 1. Function Table INPUT A OUTPUT Y H Hi-Z L L Submit Documentation Feedback Copyright © 2001–2017, Texas Instruments Incorporated Product Folder Links: SN74AUC1G07 7 SN74AUC1G07 SCES373R – SEPTEMBER 2001 – REVISED JUNE 2017 www.ti.com 9 Device and Documentation Support 9.1 Documentation Support 9.1.1 Related Documentation For related documentation see the following: • Applications of Texas Instruments AUC Sub-1-V Little Logic Devices, SCEA027 • Implications of Slow or Floating CMOS Inputs, SCBA004 9.2 Receiving Notification of Documentation Updates To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper right corner, click on Alert me to register and receive a weekly digest of any product information that has changed. For change details, review the revision history included in any revised document. 9.3 Community Resources The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use. TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help solve problems with fellow engineers. Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and contact information for technical support. 9.4 Trademarks NanoFree, E2E are trademarks of Texas Instruments. All other trademarks are the property of their respective owners. 9.5 Electrostatic Discharge Caution This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. 9.6 Glossary SLYZ022 — TI Glossary. This glossary lists and explains terms, acronyms, and definitions. 10 Mechanical, Packaging, and Orderable Information The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. 8 Submit Documentation Feedback Copyright © 2001–2017, Texas Instruments Incorporated Product Folder Links: SN74AUC1G07 PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) SN74AUC1G07DBVR ACTIVE SOT-23 DBV 5 3000 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM -40 to 85 (U07F, U07R) Samples SN74AUC1G07DBVRG4 ACTIVE SOT-23 DBV 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 U07F Samples SN74AUC1G07DBVT ACTIVE SOT-23 DBV 5 250 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM -40 to 85 (U07F, U07R) Samples SN74AUC1G07DCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (UV5, UVF, UVR) Samples SN74AUC1G07DCKRG4 ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (UV5, UVF, UVR) Samples SN74AUC1G07DCKT ACTIVE SC70 DCK 5 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (UV5, UVF, UVR) Samples SN74AUC1G07YZPR ACTIVE DSBGA YZP 5 3000 RoHS & Green SNAGCU Level-1-260C-UNLIM -40 to 85 UVN Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of