SN74AUP1T00DCKR

SN74AUP1T00 www.ti.com SCES798 – APRIL 2010 LOW POWER, 1.8/2.5/3.3-V INPUT, 3.3-V CMOS OUTPUT, SINGLE 2-INPUT POSITIVE-NAND GATE Check for Samples: SN74AUP1T00 FEATURES 1 • • • • • • • • Single-Supply Voltage Translator Output Level Up to Supply VCC CMOS Level – 1.8 V to 3.3 V (at VCC = 3.3 V) – 2.5 V to 3.3 V (at VCC = 3.3 V) – 1.8 V to 2.5 V (at VCC = 2.5 V) – 3.3 V to 2.5 V (at VCC = 2.5 V Schmitt-Trigger Inputs Reject Input Noise and Provide Better Output Signal Integrity Ioff Supports Partial Power Down (VCC = 0 V) Very Low Static Power Consumption: 0.1 µA Very Low Dynamic Power Consumption: 0.9 µA Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II Pb-Free Packages Available: SC-70 (DCK) 2 x 2.1 x 0.65 mm (Height 1.1 mm) • • More Gate Options Available at www.ti.com/littlelogic ESD Performance Tested Per JESD 22 – 2000-V Human-Body Model (A114-B, Class II) – 1000-V Charged-Device Model (C101) DCK PACKAGE (TOP VIEW) A 1 B 2 GND 3 5 VCC 4 Y DESCRIPTION/ORDERING INFORMATION The SN74AUP1T00 performs the Boolean function Y = A ● B or Y = A + B with designation for logic-level translation applications with output referenced to supply VCC. AUP technology is the industry's lowest-power logic technology designed for use in extending battery-life in operating. All input levels that accept 1.8-V LVCMOS signals, while operating from either a single 3.3-V or 2.5-V VCC supply. This product also maintains excellent signal integrity (see Figure 1 and Figure 2). The wide VCC range of 2.3 V to 3.6 V allows the possibility of switching output level to connect to external controllers or processors. Schmitt-trigger inputs (ΔVT = 210 mV between positive and negative input transitions) offer improved noise immunity during switching transitions, which is especially useful on analog mixed-mode designs. Schmitt-trigger inputs reject input noise, ensure integrity of output signals, and allow for slow input signal transition. Ioff is a feature that allows for powered-down conditions (VCC = 0 V) and is important in portable and mobile applications. When VCC = 0 V, signals in the range from 0 V to 3.6 V can be applied to the inputs and outputs of the device. No damage occurs to the device under these conditions. The SN74AUP1T00 is designed with optimized current-drive capability of 4 mA to reduce line reflections, overshoot, and undershoot caused by high-drive outputs. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2010, Texas Instruments Incorporated SN74AUP1T00 SCES798 – APRIL 2010 www.ti.com ORDERING INFORMATION (1) PACKAGE (2) TA –40°C to 85°C (1) (2) (3) SOT (SC-70) – DCK TOP-SIDE MARKING (3) ORDERABLE PART NUMBER Reel of 3000 SN74AUP1T00DCKR Reel of 250 SN74AUP1T00DCKT 6A_ For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. The actual top-side marking has one additional character that designates the wafer fab/assembly site. FUNCTION TABLE INPUTS (Lower Level Input) OUTPUT (VCC CMOS) A B Y H H L L X H X L H Supply VCC = 2.3 V to 2.7 V (2.5 V) INPUTS VT+ max = VIH min VT- min = VIL max A OUTPUT CMOS B Y VIH = 1.1 V VOH = 1.85 V VIL = 0.35 V VOL = 0.45 V Supply VCC = 3 V to 3.6 V (3.3 V) INPUTS VT+ max = VIH min VT- min = VIL max A OUTPUT CMOS B Y VIH = 1.19 V VOH = 2.55 V VIL = 0.5 V VOL = 0.45 V LOGIC DIAGRAM (NAND GATE) A B Static-Power Consumption (µA) 1 4 2 Dynamic-Power Consumption (pF) 3 80% 2.5 60% Logic† 40% 40% Voltage − V 100% 80% 3.3-V 3.3-V LVC Logic† 20% 20% AUP 0% † 0% AUP Single, dual, and triple gates Switching Characteristics at 25 MHz† 3.5 100% 60% 2 1.5 1 Input Output 0.5 0 −0.5 0 5 10 15 20 25 30 Time − ns 35 40 45 † AUP1G08 data at C = 15 pF L Figure 1. AUP – The Lowest-Power Family 2 Y Figure 2. Excellent Signal Integrity Submit Documentation Feedback Copyright © 2010, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1T00 SN74AUP1T00 www.ti.com SCES798 – APRIL 2010 3.3 V 3.3 V VIH = 1.19 V VIL = 0.5 V VIH = 1.19 V VIL = 0.5 V 1.8-V System 2.5-V System 3.3-V System 3.3-V System 2.5 V 2.5 V VIH = 1.10 V VIL = 0.35 V VIH = 1.10 V VIL = 0.35 V 1.8-V System 3.3-V System 2.5-V System 2.5-V System Figure 3. Typical Design Examples 3.3 V 1.8-V System 3.3-V System VOH min VT+ max = VIH min = 1.19 V VT− min = V IL max = 0.5 V VOL max Input Switching Waveform Output Switching Waveform Figure 4. Switching Thresholds for 1.8-V to 3.3-V Translation Submit Documentation Feedback Copyright © 2010, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1T00 3 SN74AUP1T00 SCES798 – APRIL 2010 www.ti.com ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range –0.5 4.6 V VI Input voltage range (2) –0.5 4.6 V VO Voltage range applied to any output in the high-impedance or power-off state (2) –0.5 4.6 V –0.5 VCC + 0.5 (2) UNIT VO Output voltage range in the high or low state IIK Input clamp current VI < 0 –50 mA IOK Output clamp current VO < 0 –50 mA IO Continuous output current ±20 mA Continuous current through VCC or GND ±50 mA 259 °C/W 150 °C qJA Package thermal impedance (3) Tstg Storage temperature range (1) (2) (3) DCK package –65 V Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. The package thermal impedance is calculated in accordance with JESD 51-7. RECOMMENDED OPERATING CONDITIONS (1) MIN VCC Supply voltage VI Input voltage VO Output voltage IOH High-level output current IOL Low-level output current TA Operating free-air temperature (1) 4 MAX UNIT 2.3 3.6 V 0 3.6 V VCC V 0 VCC = 2.3 V –3.1 VCC = 3 V –4 VCC = 2.3 V 3.1 VCC = 3 V 4 –40 85 mA mA °C All unused inputs of the device must be held at VCC or GND to ensure proper device operation. See the TI application report Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright © 2010, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1T00 SN74AUP1T00 www.ti.com SCES798 – APRIL 2010 ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS TA = –40°C to 85°C TA = 25°C VCC MIN TYP MAX UNIT MIN MAX VT+ Positive-going input threshold voltage 2.3 V to 2.7 V 0.6 1.1 0.6 1.1 3 V to 3.6 V 0.75 1.16 0.75 1.19 VT– Negative-going input threshold voltage 2.3 V to 2.7 V 0.35 0.6 0.35 0.6 3 V to 3.6 V 0.5 0.85 0.5 0.85 ΔVT Hysteresis (VT+ – VT–) 2.3 V to 2.7 V 0.23 0.6 0.1 0.6 3 V to 3.6 V 0.25 0.56 0.15 0.56 IOH = –20 mA 2.3 V to 3.6 V IOH = –2.3 mA VOH IOH = –2.7 mA IOL = 20 mA 1.9 1.85 2.72 2.67 2.6 2.55 2.3 V to 3.6 V IOL = 2.3 mA 2.3 V IOL = 3.1 mA IOL = 2.7 mA 3V IOL = 4 mA All inputs 1.97 3V IOH = –4 mA II VCC – 0.1 2.05 2.3 V IOH = –3.1 mA VOL VCC – 0.1 VI = 3.6 V or GND V V V V 0.1 0.1 0.31 0.33 0.44 0.45 0.31 0.33 V 0.44 0.45 0 V to 3.6 V 0.1 0.5 mA 0V 0.1 0.5 mA Ioff VI or VO = 0 V to 3.6 V ΔIoff VI or VO = 3.6 V 0 V to 0.2 V 0.2 0.5 mA ICC VI = 3.6 V or GND, IO = 0 2.3 V to 3.6 V 0.5 0.9 mA One input at 0.3 V or 1.1 V, Other inputs at 0 or VCC, IO = 0 2.3 V to 2.7 V 4 One input at 0.45 V or 1.2 V, Other inputs at 0 or VCC, IO = 0 3 V to 3.6 V 12 ΔICC mA Ci VI = VCC or GND 3.3 V 1.5 pF Co VO = VCC or GND 3.3 V 3 pF SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 2.5 V ± 0.2 V, VI = 1.8 V ± 0.15 V (unless otherwise noted) (see Figure 5) PARAMETER tpd FROM (INPUT) A or B TO (OUTPUT) Y CL TA = –40°C to 85°C TA = 25°C MIN TYP MAX MIN MAX 5 pF 1.8 2.3 2.9 0.5 6.8 10 pF 2.3 2.8 3.4 1 7.9 15 pF 2.6 3.1 3.8 1 8.7 30 pF 3.8 4.4 5.1 1.5 10.8 Submit Documentation Feedback Copyright © 2010, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1T00 UNIT ns 5 SN74AUP1T00 SCES798 – APRIL 2010 www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 2.5 V ± 0.2 V, VI = 2.5 V ± 0.2 V (unless otherwise noted) (see Figure 5) PARAMETER tpd FROM (INPUT) A or B TO (OUTPUT) Y TA = –40°C to 85°C TA = 25°C CL MIN TYP MAX MIN UNIT MAX 5 pF 1.8 2.3 3.1 0.5 6 10 pF 2.2 2.8 3.5 1 7.1 15 pF 2.6 3.2 5.2 1 7.9 30 pF 3.7 4.4 5.2 1.5 10 ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 2.5 V ± 0.2 V, VI = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 5) PARAMETER tpd FROM (INPUT) A or B TO (OUTPUT) Y TA = –40°C to 85°C TA = 25°C CL UNIT MIN TYP MAX MIN MAX 5 pF 2 2.7 3.5 0.5 5.5 10 pF 2.4 3.1 3.9 1 6.5 15 pF 2.8 3.5 4.3 1 7.4 30 pF 4 4.7 5.5 1.5 9.5 ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V, VI = 1.8 V ± 0.15 V (unless otherwise noted) (see Figure 5) PARAMETER FROM (INPUT) TO (OUTPUT) A or B Y UNIT MIN TYP MAX MIN MAX 1.6 2 2.5 0.5 8 10 pF 2 2.4 2.9 1 8.5 15 pF 2.3 2.8 3.3 1 9.1 30 pF 3.4 3.9 4.4 1.5 9.8 5 pF tpd TA = –40°C to 85°C TA = 25°C CL ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V, VI = 2.5 V ± 0.2 V (unless otherwise noted) (see Figure 5) PARAMETER tpd 6 FROM (INPUT) A or B TO (OUTPUT) Y TA = –40°C to 85°C TA = 25°C CL MIN TYP MAX MIN MAX 5 pF 1.6 1.9 2.4 0.5 5.3 10 pF 2 2.3 2.7 1 6.1 15 pF 2.3 2.7 3.1 1 6.8 30 pF 3.4 3.8 4.2 1.5 8.5 Submit Documentation Feedback UNIT ns Copyright © 2010, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1T00 SN74AUP1T00 www.ti.com SCES798 – APRIL 2010 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V, VI = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 5) PARAMETER tpd FROM (INPUT) A or B TO (OUTPUT) Y TA = –40°C to 85°C TA = 25°C CL MIN TYP MAX MIN MAX 5 pF 1.6 2.1 2.7 0.5 4.7 10 pF 2 2.4 3 1 5.7 15 pF 2.3 2.7 3.3 1 6.2 30 pF 3.4 3.8 4.4 1.5 7.8 UNIT ns OPERATING CHARACTERISTICS TA = 25°C PARAMETER Cpd Power dissipation capacitance TEST CONDITIONS f = 10 MHz VCC = 2.5 V VCC = 3.3 V TYP TYP 4 5 Submit Documentation Feedback Copyright © 2010, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1T00 UNIT pF 7 SN74AUP1T00 SCES798 – APRIL 2010 www.ti.com PARAMETER MEASUREMENT INFORMATION From Output Under Test CL (see Note A) VCC = 2.5 V ± 0.2 V VCC = 3.3 V ± 0.3 V 5, 10, 15, 30 pF VI/2 VCC/2 5, 10, 15, 30 pF VI/2 VCC/2 1 MΩ CL VMI VMO LOAD CIRCUIT VI VMI Input VMI 0V tPHL tPLH VOH VMO Output VMo VOL tPHL tPLH VOH Output VMo VMo VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS NOTES: A. B. C. D. CL includes probe and jig capacitance. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, slew rate ≥ 1 V/ns. The outputs are measured one at a time, with one transition per measurement. tPLH and tPHL are the same as tpd. Figure 5. Load Circuit and Voltage Waveforms 8 Submit Documentation Feedback Copyright © 2010, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1T00 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) SN74AUP1T00DCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 6AF (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of