SN74F08D

SN74F08 QUADRUPLE 2-INPUT POSITIVE-AND GATE SDFS038A – D2932, MARCH 1987 – REVISED OCTOBER 1993 • D OR N PACKAGE (TOP VIEW) Package Options Include Plastic Small-Outline Packages and Standard Plastic 300-mil DIPs 1A 1B 1Y 2A 2B 2Y GND description The SN74F08 contains four independent 2-input AND gates. It performs the Boolean functions Y = A • B or Y = A + B in positive logic. The SN74F08 is characterized for operation from 0°C to 70°C. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 4B 4A 4Y 3B 3A 3Y FUNCTION TABLE (each gate) INPUTS A B OUTPUT Y H H H L X L X L L logic symbol† 1A 1B 2A 2B 3A 3B 4A 4B 1 logic diagram, each gate (positive logic) & 3 2 4 6 5 A 1Y B Y 2Y 9 10 8 3Y 12 13 11 4Y † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡ Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 1.2 V to 7 V Input current range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 30 mA to 5 mA Voltage range applied to any output in the high state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC Current into any output in the low state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA Operating free-air temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C ‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input voltage ratings may be exceeded provided the input current ratings are observed. Copyright  1993, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–1 SN74F08 QUADRUPLE 2-INPUT POSITIVE-AND GATE SDFS038A – D2932, MARCH 1987 – REVISED OCTOBER 1993 recommended operating conditions VCC VIH Supply voltage VIL IIK Low-level input voltage IOH IOL High-level output current Low-level output current TA Operating free-air temperature High-level input voltage MIN NOM MAX 4.5 5 5.5 2 UNIT V V Input clamp current 0.8 V – 18 mA –1 mA 20 mA 70 °C 0 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VIK VOH VOL II IIH IIL IOS‡ ICCH MIN VCC = 4.5 V, VCC = 4.5 V, II = – 18 mA IOH = – 1 mA VCC = 4.75 V, VCC = 4.5 V, IOH = – 1 mA IOL = 20 mA VCC = 5.5 V, VCC = 5.5 V, TYP† 2.5 MAX UNIT – 1.2 V 3.4 V 2.7 0.3 0.5 V VI = 7 V VI = 2.7 V 0.1 mA 20 µA VCC = 5.5 V, VCC = 5.5 V, VI = 0.5 V VO = 0 – 0.6 mA VCC = 5.5 V, VCC = 5.5 V, VI = 4.5 V VI = 0 – 60 –150 mA 5.5 8.3 mA ICCL 8.6 † All typical values are at VCC = 5 V, TA = 25°C. ‡ Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second. 12.9 mA switching characteristics (see Note 2) PARAMETER tPLH tPHL FROM (INPUT) A or B TO (OUTPUT) Y VCC = 5 V, CL = 50 pF, RL = 500 Ω, TA = 25°C VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX§ MIN TYP MAX MIN MAX 2.2 3.8 5.6 2.2 6.6 1.7 3.6 5.3 1.7 6.3 § For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. NOTE 2: Load circuits and waveforms are shown in Section 1. 2–2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 UNIT ns PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) SN74F08D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 F08 SN74F08DBR ACTIVE SSOP DB 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 F08 SN74F08DE4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 F08 SN74F08DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 F08 SN74F08DRE4 ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 F08 SN74F08DRG4 ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 F08 SN74F08N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74F08N SN74F08NSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 74F08 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of